Upload
balluff-sensors
View
216
Download
0
Embed Size (px)
Citation preview
8/4/2019 Vision Integrate Vision on Networks
1/1Balluff, Inc. n 8125 Holton Drive Florence, KY 41042 n 1-800-543-8390 n www.balluff.com
www.ballu.com/VisionAccessories
Application Spotlight
Integrate Sharpshooter Vision Sensors on Industrial Networks
The BVS/BNI adaptor allows the three outputs and two inputs of
the Sharpshooter, as well as an additional external light source, to
be connected to any Balluff I/O network block. See table belowfor connection details. When using the Sharpshooter advanced,
congurable and exible output logic links any tool or combination
of tools to any of the three discrete outputs. See website for further
application details.
In this application, the Sharpshooter vision sensor was used to verify
lid position on a coffee container running on a conveyor. Utilizing the
internal logic controls, a trigger sensor (not shown) and a back light,the Sharpshooter was able to detect if the lid was present, if the lid
was not secure, and if the lid was correctly in place. The application
demanded that the Sharpshooters inputs and outputs be connected
to the controller through EtherNet/IP to the PLC. The BVS/BNI
adaptor was used to connect the Sharpshooter to a Balluff I/O Block
which communicated via EtherNet/IP to the controller.
Sharpshooter Connected to
Ethernet Block
Industrial Network
Confguration Diagram
Low-end vision sensors help many customers solve a variety of applications for a fraction of the cost of higher end vision solutions. But these lower cost
solutions tend to have less data communication options and have only simple built-in outputs and inputs. Balluffs BVS Sharpshooter is a vision sensor that
can handle up to 24 different inspection points and can be programmed with simple logic on its three outputs. The Sharpshooter also has inputs which can
be for a trigger sensor and for job switching between 20 different, internally-stored recipes. Utilizing all of these inputs and outputs on an industrial network is
made simple by implementing the BVS/BNI adaptor.
nReduced costs with fewer cordsets and quicker installation time
nEligible network blocks by Balluff: EtherNet/IP, DeviceNet, Probus, ProNet, CC-Link, IO-Link
nSolid IP67 solution using rugged industrial connectors
nShort circuit & overload process data bits on the industrial network blocks
Order Code Part Number Description
BCC0726 BCC Z006-002 BVS/BNI adapter - M12 - M12, 8-wire 1
BVS0003 BVS OI-3-001-E Sharpshooter - BVS-E standard 2
BCC00R0
BCC00R1
BIS L-500-PU-05
BIS L-500-PU-10
Double-ended, shielded cable - M12,
8-wire, 5m
Double-ended, shielded cable - M12,
8-wire, 10m
3
BCC01F5
BCC01F7
C04 ANT-00-PB-050MS
C04 ANT-00-PB-100MS
Single-ended, shielded cable - M12,
8-wire, female, 5m
Single-ended, shielded cable - M12,
8-wire, female, 10m
4
BCC00TL BKS-S117-00 Field attachable - M12, 8-pin 5
1 2
3 4 5
Benefts
AB
C
D
BVS/BNIConnections
Sharpshooter I/O Functions
A Output 1, Output 2
B Output 3
C Job select, Trigger input
D External lighting
EtherNet/IPInput/Output Module
BVS/BNIAdaptor
ExternalLighting
Sharpshooter