88
COMPETICIÓN INTERNACIONAL DE CASAS SOLARES DESCARGA AQUÍ LA VERSIÓN DIGITAL SOLAR DECATHLON EUROPE 14-3O ESCENARIO PUERTA DEL ÁNGEL | CASA DE CAMPO SEPTIEMBRE 2O12 MADRID

visitingguide1.pdf

Embed Size (px)

Citation preview

Page 1: visitingguide1.pdf

1

COMPETICIÓNINTERNACIONALDE CASAS SOLARES

DESCARGA AQUÍ LA VERSIÓN DIGITAL

SOLARDECATHLONEUROPE

14-3OESCENARIO PUERTA DEL ÁNGEL | CASA DE CAMPOSEPTIEMBRE 2O12 MADRID

Page 2: visitingguide1.pdf

2

Casa Solar de la UPMen la edición SD 2007

Page 3: visitingguide1.pdf

3

SOLAR DECATHLON EUROPE

SDE2012, UNA INICIATIVA COMPROMETIDACON LA ARQUITECTURA SOSTENIBLE ......................................4

SMART GRID:EL CORAZÓN DE LA VILLA SOLAR ...............................................7

EL DECATHLON ........................................................................................8

SOLAR DECATHLON EUROPE:MÁS ALLÁ DE LA COMPETICIÓN .................................................10

1OACTION:LA CONCIENCIA SOSTENIBLE DE EUROPA .............................11

EXPERIENCIAS SOLARES ................................................................12

ACTIVIDADES..........................................................................................14

EQUIPOS PARTICIPANTES ............................................................... 17

CASAS DE COLABORADORES ......................................................39

Edita: Solar Decathlon Europe 2012DIRECTOR DE PROYECTO DEL SOLAR DECATHLON EUROPE 2012: SERGIO VEGACOORDINACIÓN DE LA GUÍA DE VISITA: SÁLVORA FELIZEdición: Fernando UríasRedacción: Rodrigo GonzálezTraducción: Victoria SmithInfografías: Tomás PinedaDirección de Arte: Carlos Ramos

CONTENIDOS

Page 4: visitingguide1.pdf

4

SDE2012,UNA INICIATIVA COMPROMETIDA CON LA ARQUITECTURA SOSTENIBLE

Construir una vivienda que funcione únicamente con energía solar ya está al alcance de todos y las casas que han construido los universitarios que participan en la segunda edición de esta son un ejemplo de ello. Esta competición de casas sola-res nació con los objetivos de promover el desa-rrollo sostenible en la arquitectura a través de la investigación y la innovación, y de concienciar y sensibilizar a los ciudadanos sobre la importancia de cuidar el medio ambiente y fomentar la sosteni-bilidad en la edificación.

Del 14 al 30 de septiembre, 19 equipos de 12 países (Alema-nia, Brasil, China, Dinamarca, Egipto, España, Francia, Hun-gría, Italia, Japón, Portugal y Rumanía), edificarán en la Villa Solar, ubicada en Puerta del Ángel, en la madrileña Casa de Campo, 19 viviendas energéticamente eficientes, lo que su-pondrá la culminación de un proyecto que comenzó en 2011 en sus respectivos centros académicos. Durante estos 15 días, cada vivienda tendrá que superar 10 pruebas puntua-bles. Aquella que consuma la menor cantidad de recursos naturales y produzca el mínimo de residuos durante su ciclo de vida será la ganadora de la competición.

La segunda edición de Solar Decathlon Europe está organi-zada por el Ministerio de Fomento, el Ayuntamiento de Madrid y la Universidad Politécnica de Madrid a través de su Escuela Técnica Superior de Arquitectura de Madrid, y cuenta con el patrocinio exclusivo de Schneider Electric y Kömmerling.

La Villa Solar estará abierta de manera gratuita hasta el próxi-mo 30 de septiembre. El público que acuda podrá visitar el interior de las 19 viviendas en competición y contemplar to-dos sus detalles tecnológicos y de diseño gracias a un tour explicativo en cada una de ellas. Se trata sin duda de una oportunidad única para conocer de primera mano las innova-ciones en materia de edificación sostenible y comprobar en primera persona que vivir en una casa solar no es una utopía.

OBJETIVOS

La organización de Solar Decathlon Europe tiene una triple finalidad formativa, científica y divulgativa. De esta manera, mientras los decathletas aprenden a trabajar en equipos multidisciplinares, enfrentándose a los retos que plantea el futuro de la edificación y desarrollando soluciones inno-vadoras, el público visitante de la Villa Solar comprueba y toma conciencia de que es una posibilidad real aunar la disminución del impacto medioambiental con el manteni-miento de los estándares de confort y calidad en el diseño de los hogares.

Por su parte, los voluntarios, imprescindibles para la rea-lización y éxito de Solar Decathlon Europe, tienen la opor-tunidad de intercambiar experiencias con el resto de los integrantes de los equipos participantes y madurar profe-sionalmente a través de su trabajo durante la competición.

La segunda edición de Solar Decathlon Europe está orga-nizada por el Ministerio de Fomento, el Ayuntamiento de Madrid y la Universidad Politécnica de Madrid a través de su Escuela Técnica Superior de Arquitectura de Madrid, y cuenta con el patrocinio exclusivo de Schneider Electric y Kömmerling.

UNA INICIATIVA GLOBAL

El origen de Solar Decathlon Europe está en la edición ame-ricana de la competición. El Departamento de Energía del gobierno norteamericano creó, en 1999, la competición U.S. DOE Solar Decathlon, cuya primera edición se celebró en 2002 en el National Mall de Washington DC.

La participación de la Universidad Politécnica de Madrid en las ediciones americanas de 2005 y 2007 dio a conocer la competición en España y facilitó el acuerdo de los gobiernos de ambos países para poner en marcha la primera edición fuera de EE.UU. Este acuerdo confirma no sólo el compro-miso que nuestro país tiene con el uso de energías sosteni-bles, sino también la necesaria implicación de las institucio-nes de nuestro país y de sus ciudadanos con la protección y cuidado de nuestro planeta. Cuestiones todas para las que las iniciativas gubernamentales de sensibilización y educa-ción, en la que se enmarca Solar Decathlon Europe, juegan un papel tan esencial como insustituible.

Así, en el año 2010 se celebró también en Madrid, con gran éxito, la primera edición de Solar Decathlon Europe, donde más de 200.000 visitantes pudieron conocer las viviendas sostenibles de los equipos participantes. La presente edi-ción es, por tanto, la segunda que se celebra en Madrid.

Page 5: visitingguide1.pdf

5

Casa ganadora LUMENHAUSen la edición 2010 de Solar Decathlon Europe

Page 6: visitingguide1.pdf

6

Además de la edificación de las 19 viviendas sostenibles, Solar Decathlon Europe 2012 ofrece numerosas activida-des relacionadas siempre con la energía sostenible, in-cluido un programa específicamente diseñado y orientado a los niños. De una manera amena y divertida, los más pequeños podrán empezar a tomar conciencia de la im-portancia de cuidar el medio ambiente y de las ventajas que tiene una casa que funciona sólo con energía solar.

Una de las principales novedades de esta edición es la posibilidad de visualizar el funcionamiento de una red in-teligente o smart grid, gracias a la cual la energía será compartida por todas viviendas de la Villa Solar, lo que permitirá que, con el excedente energético que éstas pro-duzcan, se abastezca toda la Villa Solar. Sólo un ejemplo: la electrolinera (punto de recarga para vehículos eléctri-cos), situada dentro del recinto, recibe parte de la energía sobrante de las casas. En la edición 2010 de SDE, las viviendas participantes produjeron el triple de energía de

la que consumieron. En total, se produjeron 6.177 kWh, mientras que el consumo fue de 2.579 kWh. La energía sobrante se inyectó en la red general para aprovecha-miento de los vecinos.

Cada vez son más los países conscientes de que el futuro pasa por el uso racional de los recursos naturales y de las energías sostenibles. España ha sido la primera nación en acoger la competición Solar Decathlon fuera de Es-tados Unidos, pero el país norteamericano ya ha cerrado acuerdos con China, que acogerá la edición en 2013, y con Francia, que, en 2014, se convertirá en la sede de la próxima edición europea.

Durante 15 días, casi medio millar de universitarios de 12 nacionalidades edificarán 19 proyectos de viviendas sos-tenibles. Construcciones totalmente innovadoras y per-fectamente habitables que –deseamos– serán nuestras casas en un futuro no muy lejano.

Tongji TeamCHINA

PrispaRUMANÍA

Rhône AlpesFRANCIA

OdoooprojectHUNGRÍA

CEU Team ValenciaESPAÑA

(e)co TeamESPAÑA

cem+nem-PORTUGAL

Andalucía TeamESPAÑA

RWTH Aachen UniversityALEMANIA

American University in CairoEGIPTO

Aquitaine Bordeaux CampusFRANCIA

EHU TeamESPAÑA

Med in ItaliaITALIA

Maquetas virtualesde las casas participantes

en la edición 2012 deSolar Decathlon Europe

Chiba UniversityJAPÓN

Grupo _UnizarESPAÑA

Team BrasilBRASIL

EcolarALEMANIA

AstonyshineFRANCIA/ITALIA

Team DTUDINAMARCA

Page 7: visitingguide1.pdf

7

EL CORAZÓNDE LA VILLA SOLAREl Micro Smart Grid de Solar Decathlon conectará y controlará todo el sistema eléctrico de este micro grid que unirá las 19 casas de la Villa Solar, así como los edificios de la organización, los stys, carpas, servicios comunes e, incluso, los puntos de recarga de los vehículos eléctricos de la Villa Solar. La red diseñada por Schneider Electric permitiría gestionar en un año 180.000 kWh y ahorrar el equivalente a 180 toneladas de CO2.

Gestionar eficientemente la producción de energía de las 19 viviendas solares participantes en Solar Decathlon Euro-pe (SDE) 2012 constituye uno de los principales retos de la Villa Solar. Por ello, y durante los días en que se desarrolla la competición, toda la Villa Solar estará conectada a un mismo micro smart grid cuya arquitectura ha sido diseñada por Schneider Electric, que también patrocina SDE.

Un smart grid es una red de distribución eléctrica que per-mite la conexión multidireccional entre consumidores y pro-ductores y entre los propios consumidores. La utilización de redes inteligentes, como la diseñada para esta edición de Solar Decathlon Europe, permite maximizar la eficien-cia del sistema, balanceando los flujos en tiempo real y adaptando la oferta energética a la demanda. Además, la proximidad entre la producción energética y su consumo, permite reducir las pérdidas ocasionadas por el transporte, optimizando así los beneficios de las energías renovables.

Todos los elementos del Micro Smart Grid estarán conec-tados globalmente a través de la tecnología Scada de Sch-neider Electric. En todo momento se podrá ver la produc-ción y consumo de energía en los distintos puntos de la red, controlar los flujos, almacenar el excedente para futuros picos de demanda y gestionar de manera remota el sistema en caso que sea necesario. Además, y por primera vez, el excedente de energía podrá volcarse en la red eléctrica de la ciudad de Madrid, beneficiándose los ciudadanos de la ciudad de la energía producida por las casas participantes.

El Micro Smart Grid contará además con una interfaz muy intuitiva que permite a los visitantes entender y ver como se está comportando la energía en la Villa Solar en tiempo real.

Pérgola solar

Vending

Alumbrado viales

Carga VE

Acumulaciónde energía20 casas compitiendo

Oficina SDE, pabellones,stands patrocinadores

Cafeterías

Fuente: Schneider Electric

Page 8: visitingguide1.pdf

8

En enero de 2011, la organización de Solar Decathlon Eu-rope (SDE) seleccionó entre las propuestas recibidas a los equipos que formarían parte de esta competición. Desde ese momento, y de acuerdo a las reglas de SDE, comenzó el proceso de diseño de las viviendas con las que cada uno de los equipos compite actualmente.

Las normas de SDE establecen un calendario de entregas de documentación por parte de los equipos participantes, de modo que la organización de SDE pueda realizar un segui-miento del desarrollo de los proyectos y comprobar que és-tos se ajustan a los parámetros señalados.

A principios de septiembre de 2012, cada uno de los equipos comenzó el montaje de sus casas en la Casa de Campo de Madrid, que estarán abiertas al público entre los días 14 y 30 del mismo mes. Durante este tiempo, se evaluarán las diez pruebas de la competición. La evaluación de éstas se realiza en base a los tres criterios siguientes: grado de cumplimiento en la realización de las tareas, medición in situ y valoración de los jurados. El equipo con el mayor número de puntos al finalizar la competición será el vencedor.

Puntos por Realización de Tareas: Los equipos obtienen puntos por haber completado exitosamente la tarea o por su grado de cumplimiento.

Puntos por Mediciones in situ: Durante la competición, las casas permanecen monitorizadas, realizándose además me-diciones puntuales de parámetros adicionales. La puntuación se otorga en función de la proximidad de las mediciones ob-tenidas al objetivo marcado en la prueba correspondiente.

Puntos otorgados por Jurados: Jurados de expertos especí-ficos en cada materia otorgarán puntos siguiendo criterios de evaluación y guías desarrolladas por la organización de Solar Decathlon Europe.

ELDECATHLON

Imagenes pertenecientesa la edición de 2010

Page 9: visitingguide1.pdf

9

ARQUITECTURAPrueba con jurado | 120 puntos

Se busca un diseño atractivo que combine espacios confortables y funcionales con tecnologías y estrategias bioclimáticas que re-duzcan el consumo energético de la casa. Un jurado de arquitec-tos visita cada una de las casas, buscando un proyecto coherente e integrado.

INGENIERÍA Y CONSTRUCCIÓNPrueba con jurado | 80 puntos

Esta prueba evalúa los sistemas que los equipos participantes han utilizado para construir su vivienda, teniendo en cuenta el diseño, la puesta en obra y la conveniencia de su elección. Un jurado de expertos, en base a la documentación técnica y a la visita a la casa, analiza elementos que van desde la estructura del inmueble a sus sistemas solares.

EFICIENCIA ENERGÉTICAPrueba con jurado | 100 puntos

La energía más limpia es la que no se llega a consumir. Por esta razón, la competición pone especial énfasis en que los equipos cubran las necesidades de los habitantes de las casas emplean-do la mínima cantidad de recursos posible. El jurado evalúa con-ceptos tales como la envolvente térmica del edificio, los sistemas activos y pasivos (como el soleamiento, la ventilación, etc.) de acondicionamiento térmico, eficiencia de los electrodomésticos, sistemas de control, automatización, etc.

BALANCE DE ENERGÍA ELÉCTRICAMedición | 120 puntos

Esta prueba evalúa la capacidad de las casas para autoabaste-cerse de la energía eléctrica que necesitan a lo largo del año. Las casas deberán tener un consumo lo más reducido posible y una producción eléctrica igual o mayor a su consumo. La prueba se divide en tres apartados que consideran la autonomía eléctrica de la casa, la correlación temporal entre generación y el consumo, y consumo por unidad de superficie. Se evalúa sobre los resultados obtenidos por contadores eléctricos bidireccionales instalados por la Organización en cada una de las viviendas.

CONDICIONES DE BIENESTARMedición-realización de tareas | 120 puntos

En esta prueba se valora la capacidad de cada casa para mante-ner unas condiciones ambientales (temperatura, humedad, acús-tica, calidad del aire e iluminación) apropiadas para el confort de sus habitantes. Se evalúa a partir los resultados obtenidos por sensores instalados por la Organización en cada una de las vivien-das y por un ensayo acústico.

FUNCIONAMIENTO DE LA CASAMedición-realización de tareas | 120 puntos

Se trata de comprobar la posibilidad de llevar a cabo con nor-malidad ciertas tareas cotidianas, como el uso de electrodo-mésticos, equipos electrónicos, producción de agua caliente o, simplemente, invitar a cenar a estudiantes de otros equipos participantes.

COMUNICACIÓN Y SENSIBILIZACIÓN SOCIALPrueba con Jurado | 80 puntos

Esta prueba evalúa la capacidad de los equipos de transmitir al público los conceptos básicos que motivan la competición SDE, así como las ideas que aporta la casa desarrollada en la línea de estos, tanto durante el periodo de diseño previo como durante las visitas de público a la Villa Solar. Un jurado de expertos estudia el Plan de Comunicación diseñado por cada equipo durante los 2 años de elaboración de la casa y realiza el mismo recorrido por la casa que se ofrece al público, valorándolo en base a su efectivi-dad, eficiencia y creatividad.

INDUSTRIALIZACIÓN Y VIABILIDAD DE MERCADOPrueba con Jurado | 80 puntos

En esta prueba se valora si la casa diseñada para la compe-tición por cada equipo se puede trasladar al mercado inmobi-liario de forma exitosa. El jurado de expertos tiene en cuenta factores como el atractivo comercial de producto, el precio de producción, la posibilidad de prefabricar partes del edificio y la capacidad que tiene el diseño de adaptarse a otros modelos de vivienda.

INNOVACIÓNPrueba con Jurado | 80 puntos

Se valora si los equipos han aportado soluciones innovadoras en diferentes ámbitos, desde ideas arquitectónicas al desarro-llo de nuevos materiales y sistemas. Son los propios jurados de otras pruebas quienes califican por separado los aspectos innovadores de su área de evaluación. La suma de estas califi-caciones constituye la puntuación que obtiene cada equipo en esta prueba.

SOSTENIBILIDADPrueba con Jurado | 100 puntos

Esta prueba tiene en consideración el impacto ambiental de la casa a lo largo de su “ciclo de vida”, es decir, desde la extracción y transformación de sus materiales, su proceso de construcción, su uso y hasta su demolición y reciclaje. Se tienen en cuenta el uso de los recursos naturales, las posibilidades de reutilización y reciclaje, así como, reducción de la generación de residuos.

LAS DIEZ PRUEBAS

Page 10: visitingguide1.pdf

10

Solar Decathlon Europe [SDE] es mucho más que una compe-tición universitaria. Es también una formidable –y eficaz– plata-forma de sensibilización en pro del uso de energías renovables.

Para conseguir este objetivo, la organización de SDE ha diseña-do una Villa Solar articulada en torno a los siguientes cuatro con-ceptos: ahorro energético, eficiencia energética en la edificación y la ciudad y eficiencia energética eléctrica, sostenibilidad.

Cada uno de estos conceptos, gestionados por una o varias instituciones, “cobran vida” en diferentes espacios temáticos re-partidos a lo largo y ancho de la Villa Solar, permitiendo a sus visitantes visualizarlos a través de paneles informativos, fotogra-fías audiovisuales y objetos.

AHORRO ENERGÉTICOEl Instituto para la Diversificación y Ahorro de la Energía (Idae), ubicado en el Domo Institucional, ha diseñado un espacio mar-cadamente divulgativo y orientado a concienciar sobre la nece-sidad de ahorrar en el consumo de energía y cómo conseguirlo. Entre otros contenidos, este espacio pone especial interés en las medidas incluidas en el Objetivo 20/20/20 promovido por la Unión Europea en el marco de su política contra el cambio climático y en el variado abanico de certificaciones energéti-cas que tienen como fin reducir nuestro consumo energético.

EFICIENCIA MULTINIVELLa Universidad Politécnica de Madrid (UPM), también ubicada en el Domo Institucional, es la responsable de dar a conocer, desde una perspectiva experta y profesional, todo el abanico de cuestiones clave que, como el urbanismo sostenible, la ar-quitectura bioclimática, los sistemas pasivos, las instalaciones eficientes o la rehabilitación energética, contribuyen al logro de la eficiencia energética multinivel en edificios y ciudades.

EFICIENCIA ELÉCTRICAEl propio Solar Decathlon Europe gestiona este espacio temá-tico, ubicado en el Prototipo SDE10 de la UPM, que tiene por objetivo mostrar al público como se gestiona la generación y la demanda de energía en la Villa Solar gracias a la Smart Grid. Además de la Smart Grid, los visitantes de esta área temática podrán conocer en más detalle qué son y cómo funcionan las diferentes energías renovables a través de ejemplos prácticos. Finalmente, otro espacio temático los introducirá en el con-cepto de “movilidad sostenible” a través del funcionamiento de los coches eléctricos y del impacto que su uso generalizado futuro tendrá en la red eléctrica.

SOSTENIBILIDADEl último de los grandes conceptos en que se articula la Villa Solar está dedicado a la Sostenibilidad en su más amplio sen-tido. Este espacio temático, gestionado conjuntamente por la Universidad Politécnica de Madrid y el Ministerio de Fomento, y ubicado en el Domo Institucional, muestra en qué consiste el desarrollo sostenible y la necesidad que tenemos todos de ser sostenibles en una amplia variedad de situaciones cotidianas.

SOLAR DECATHLON EUROPE:MÁS ALLÁ DE LACOMPETICIÓN

Page 11: visitingguide1.pdf

11

1OACTION:LA CONCIENCIA SOSTENIBLEDE EUROPA¿Es posible hacer casas autosuficientes?, ¿cómo funciona una vivienda solar?, ¿qué materiales son más eficientes para construir una casa? A éstas y otras preguntas responde el proyecto europeo 10ACTION a través de multitud de actividades que ha estado desarrollando en diez países europeos (España, Francia, Reino Unido, Portugal, Holanda, Bélgica, Italia, Austria, Suecia y Dinamarca).

10ACTION nació en 2010 en el marco del programa Ener-gía Inteligente Europa y está liderado por la Universidad Politécnica de Madrid. Su objetivo principal es concienciar a la sociedad del uso responsable de las energías renova-bles en edificación.

Hasta el momento, los resultados conseguidos han sido excelentes, gracias a que 10ACTION ha adaptado cada actividad realizada a un público concreto, llegando a niños, jóvenes, estudiantes, profesionales del sector de la cons-trucción y público en general. En total, 180.000 personas han participado en ellas. Además, a través de los medios de comunicación han llegado a un millón y medio de ciuda-danos europeos.

En España, 10ACTION está organizando ahora un gran número de actividades que se desarrollarán del 14 al 30

de septiembre en la Villa Solar de Solar Decathlon Europe (SDE) 2012, creando un espacio único y versátil centrado en las energías sostenibles.

Desde su origen, 10ACTION ha estado unido a SDE, ya que el proyecto europeo nace para difundir los conocimien-tos adquiridos en Solar Decathlon Europe 2010. Con este propósito 10Action creó el libro digital Solar Decathlon Eu-rope 2010 Towards Energy Efficient Buildings o celebró la conferencia “Edificios de consumo de energía casi nulo. Nueva construcción y rehabilitación” para profesionales, entre otras muchas actividades.

10ACTION, cofinanciado por el programa Energía Inteli-gente Europa, apuesta por un mundo más sostenible he-cho por niños y mayores.

Taller organizadopor 10Action

Page 12: visitingguide1.pdf

12

grupo !_unizar • casa !_unizar • españa

chiba university • omotenasi house • japón

aquitaine bordeaux campus • sumbiosi • francia

cem+nem- • cem’ casas em movimento • portugal

tongji team • para eco-house • china

andalucia team • patio 2.12 • españa

team Ecolar • ecolar home • alemania

team brasil • ekó house • brasil

astonyshine • astonyshine • francia-italia

EXPERIENCIASSOLARESHemos diseñado esta doble página para que anotes tus impresiones de cada una de las casas participantes en SDE2O12.

Page 13: visitingguide1.pdf

13

ceu team valencia • smlsystem • españa

ehu team • ekihouse • españa

aachen university • counter entropy house • alemania

american university in cairo • arkan • egipto

rhône alpes • canopea • francia

(e)co team • (e)co • españa

team dtu • fold • dinamarca

odooproject • odoo • hungría

med in italy • med in italy • italia

SOLARDECATHLONEUROPE

Page 14: visitingguide1.pdf

14

ACTIVIDADES

PROGRAMA GENERAL

GO1 VISITAS GUIADAS POR LA VILLA SOLAR

Se trata de visitas de carácter general, que explican la competición SDE y la Villa Solar paseando por el exterior de las casas. Duración aproximada 60 min.HORARIO: V 16:00-22:00 y S-D 10:00-22:00

GO2 VISITAS A LAS CASAS DE LOS COLABORADORES SDE (FUERA DE CONCURSO)

Se explicará al público las tecnologías o sistemas constructivos más destaca-dos de las casas que no participan en la competición: Casa ecHor (de IECA), FabriQ21, MODULAB, Saint Gobain Wanner y Casa SDE10 UPM (Smart City Center).HORARIO: L-J 10:00-20:00, V-D 10:00-22:00

GO3 COCINAS SOLARES

Instalación de 2 cocinas y un horno solar donde se elaboran a modo de demos-tración desde café y agua en ebullición para tisanas, hasta repostería y paellas.Horario: V 17:00-20:00 y S-D 11:00-14:00 y 17:00-20:00.

GO4 MARATÓN FOTOGRÁFICO VILLA SOLAR

Concurso de fotos para todos los públicos sobre escenarios de la Villa Solar. Las fotos se subirán a Facebook. Habrá premios diarios y uno global al final del Solar Decathlon Europe.Horario: L-J 10:00-20:00, V-D 10:00-22:00.

GO5 CONCURSO DE MICRO-CORTOS “ME GUSTA/NO ME GUSTA”

¿Qué objeto de la vida cotidiana detestas porque lo consideras innecesario o nocivo para el planeta? ¿Cuál admiras por el sentido común y honestidad con el que está diseñado? Sube tu micro-corto a la red y gana un nuevo iPad 32GB, 20 camisetas exclusivas diseñadas por Loreak Mendian, 40 entradas de cine y sobre todo… tu micro-corto formará parte de la película colectiva “Me gusta/No me gusta”, basada en los objetos de la vida cotidiana.

GO6 EXPOSICIONES 10ACTION -IEE

Exposición de las actividades que ha organizado el proyecto 10ACTION en 10 países europeos para 180.000 personas. Incluye los trabajos de los niños, jóvenes y estudiantes que han participado en las actividades 10 ACTION. Los ganadores y mejores propuestas nacionales e internacionales en el concurso “ Dibuja La Energía del Sol, concurso de fotos “Energía en Foco”, Concurso de diseño, “Ideas para el Futuro” y el concurso de arquitectura y urbanismo “More with less”. Horario: L-J 10:00-20:00, V-D 10:00-22:00.

GO7 CASA PASIVA (SLOW ENERGY)

Orientada a un público joven y adulto, donde mediante una casa “des-plegable” se muestra cómo transformar nuestras actuales viviendas de modo que apenas pierdan energía, mediante medidas pasivas (Passivhaus aplicado).L-J 10:00-20:00, V-D 10:00-22:00.

HORARIOS GENERALESDE LA VILLA SOLAR 2012:

Todos los días de 10:00 a 22:00 h.*

*La Villa Solar abrirá sus puertas a partir del 14 de Septiembre a las 16:00 h

*La Villa Solar cerrará sus puertas de forma puntual el Sábado 29 a las 19:00 h

HORARIOS DE APERTURADE LAS CASAS SDE 2012:

Lunes a jueves: de 16:00 a 20:00 h. (bajo reserva del 17 al 20 para profesionales y del 24 al 27 para grupos)

Sábados y domingos: de 10:00 a 22:00 h.

Los decathletas que han construido las casas de la Competición SDE 2012, explicarán al público sus proyectos y tecnologías en visitas de unos 15 minutos por el interior de las mismas. Estas visitas deberán ser concertadas con anterioridad entre semana. De viernes a domingo el público podrá visitarlas guardando los turnos de espera oportunos en el siguiente horario V:16:00-22:00 y S-D:10:00-22:00. El sistema de reserva de visitas a las casas será habilitado el 3 de Septiembre en www.sdeurope.org.

Simulación virtual de la Villa Solar 2012

Page 15: visitingguide1.pdf

15

ACTIVIDADES

NIÑOS Y JÓVENES

AO1 CONCURSO: “DIBUJA LA ENERGÍA DEL SOL”(1-5 años y 6-10 años) Es un concurso internacional en el que pueden participar niños de 1 a 10 años dibujando el uso de la energía solar. Para ello pueden usar lápices, rotuladores, acuarelas o ceras. Aquí podrás encontrar mesas para los más peques, para pintar, colorear e imaginar.HORARIO

AO2 ZONA DE JUEGOS EDUCATIVOS(0-5 años y 6-10 años) Espacio con pizarras, cuentos, construcciones, pintacaras, cuentacuentos...HORARIO

AO3 WEB GAME: “LA ENERGÍA EN MI CASA”(6-10 años) Juego de ordenador para construir tu propia casa con 10 ACTION. Pero ten en cuenta que tu casa no sólo tiene que ser bonita, sino que también debe ser respetuosa con el medio ambiente y ahorrar energía.HORARIO

AO4 DESCUBRE LA VILLA SOLAR (CUADERNO EDUCATIVO)(6-10 años y 11-18 años) Te explicamos lo que es el Solar Decathlon Europe y las Casas una a una, con actividades y pruebas, para visitarlas con el cole o con tus padres. El recorrido se puede realizar individualmente o en grupo, con pruebas sobre el SDE. Ade-más, encontrarás información sobre concursos y actividades en los que puedes participar.HORARIO

AO5 PASAPORTE SOLAR(6-10 años y 11-18 años) Utiliza el pasaporte Solar y colecciona los sellos que te pondrán en cada casa visitada.HORARIO

AO6 TALLERES DE CIENCIA - MADSCIENCE(0-5 años, 6-10 años y 11-18 años) Talleres sobre ciencia y Arquitectura. Descubre cómo divertirte con objetos que se alimentan con energía solar y muchas otras curiosidades.HORARIO: M-X-V 10.30-12.30 para colegios (ver cuadro naranja)

AO7 CREA TU CIUDAD - TALLER COLEGIO OFICIAL DE ARQUITECTOS DE MADRID(0-5 años, 6-10 años y 11-18 años) Construye con materiales reciclados tu propia ciudad sostenible, diseñando el mobiliario, las casas, parques y edificios de todo tipo. Tráete tu caja, bote, brick o rollo de papel, deja volar tu imaginación y forma parte de este divertido proyecto.HORARIO

AO8 VER Y SENTIR LA ENERGÍA. TERMOGRAFÍA AL ALCANCE DE TODOS – TALLER COLEGIO OFICIAL DE ARQUITECTOS DE MADRID(0-5 años, 6-10 años y 11-18 años) Ven a hacerte una foto termográfica y descubre la temperatura de tu cuerpo y de otros materiales.HORARIO

AO9 A_SOMBRA2 – TALLER COLEGIO OFICIAL DE ARQUITECTOS DE MADRID(6-10 años y 11-18 años) Recorta, dobla, pega... Crea las figuras que proporcionarán las sombras de este taller que relaciona la naturaleza y la arquitectura.HORARIO

A1O CASA REHABILITABLE (SLOW ENERGY) (6-10 años y 11-18 años) Aquí los niños (y sus padres) comprenderán jugando cómo gastar poco en ca-lefacción mediante la aplicación de técnicas y soluciones, así como a distinguir entre los distintos tipos de energía.HORARIO

A11 CICLALAB (11-18 años) Música y conciertos alimentados por paneles solares y la energía que tú mis-mo generas al pedalear en nuestras bicicletas. Una actividad participativa y ecológica.Escenario de uso libre con reserva previa.HORARIO: V-S-D por la tarde

A12 CONCURSO DE DISEÑO “IDEAS PARA EL! FUTURO”(11-18 años) Concurso de diseños sobre ideas para un futuro más sostenible: “Ciudades del futuro” Y “Edificios del futuro”. Técnica libre: dibujos, maquetas, texto, música, fotos, vídeo… Habrá premios para los tres primeros como Tablets o iPods. Consultar bases en la web http://10action-teenagers.sdeurope.orgHORARIO

A13 CONCURSO DE FOTOGRAFÍA “ENERGÍA EN FOCO”(11-18 años) Concurso de fotografía sobre temas relacionado con el SDE y la Energía del Sol. La entrega de las fotografías será a través de [email protected]. Ha-brá premios para los tres primeros comoTablets o iPods. Consultar bases en la web http://10action-teenagers.sdeurope.orgHORARIO

A14 CONCURSO DE MICRO-CORTOS “ME GUSTA/NO ME GUSTA”(11-18 años) ¿Qué objeto de la vida cotidiana detestas porque lo consideras innecesario o nocivo para el planeta? ¿Cuál admiras por el sentido común y honestidad con el que está diseñado? Sube tu micro-corto a la red: habrá premios para los tres primeros comoTablets o iPods. Consultar bases en la web www.sdeurope.orgHORARIO

A15 SOMBRAS RECICLADAS (11-18 años) Mediante el uso de materiales y objetos que han perdido sus condiciones origi-nales, pero que siguen guardyo su esencia, crearemos espacios de descanso guarecidos del sol en la Villa Solar.HORARIO

14-30 SEPTIEMBRE

V de 17:00-20:00 hS y D de 11:00-14:00 h y de 17:00-20:00 h.M, X y V con reserva previa para grupos y colegios

Lunes a jueves de 10:00 a 20:00 hViernes a domingo de 10:00 a 22:00 h

* Estos horarios están sujetos a cambios. Confirmar en la web.** Todos los menores deberán ir acompañados por un adulto responsable del

mismo durante la realización de las actividades.

Actividades para niñosen Solar DEcathlon Europe

Page 16: visitingguide1.pdf

16

ACTIVIDADES

UNIVERSITARIOSY PROFESIONALES

MESAS REDONDAS CON JURADOS PARA UNIVERSITARIOS

TODAS A LAS 19:00 h.

ARQUITECTURA (19 de septiembre)

INGENIERÍA (20 de septiembre)

INDUSTRIALIZACIÓN (21 de septiembre)

COMUNICACIÓN (22 de septiembre)

SOSTENIBILIDAD (26 de septiembre)

EFICIENCIA ENERGÉTICA (27 deseptiembre)

CLASES TEÓRICAS Y DEBATES

ARQUITECTURA E INGENIERÍA DE LA EDIFICACIÓN UNIVERSIDAD DE ALCALÁ DE HENARES

LUNES Y JUEVESClases teóricas: De 10:00 a 11:00 h. y de 16:00-17:00 h.Debates: De 13:00 a 14:00 h. y de 19:00 a 20:00 h.Lugar: CARPA DE ACTIVIDADES

Lunes 17 | Mañana

SOSTENIBILIDAD. MARCO + INTRODUCCIÓN A LA ARQUITECTURA SOSTENIBLE

Lunes 17 | Tarde

ARQUITECTURA SOSTENIBLE CONSTRUIDA

Jueves 20 | Mañana y Tarde

ARQUITECTURA VERNÁCULA Y SOSTENIBILIDAD

Lunes 24 | Mañana y Tarde

INTRODUCCIÓN A LA UTILIZACIÓN DE MATERIALES Y TÉCNICAS CONSTRUCTIVAS DE BAJO IMPACTO AMBIENTAL

Jueves 27 | Mañana y Tarde

PREFABRICACIÓN E INDUSTRIALIZACIÓN. INTRODUCCIÓN A TÉCNICAS Y SISTEMAS OPTIMIZADOS

CONFERENCIAS

Lunes 17

PRESENTACION PROYECTO PAÍS VASCO De 10:00 a 14:40 h.| AUDITORIO KÖMMERLINGOrganizada por EHU TEAM

SMART PATIO REINVENTANDO LA CASA MEDITERRANEA Y ANTICIPANDO EL FUTURO DE LA VIVIENDA

De 10:00 a 14:40 h.| AUDITORIO SCHNEIDER ELECTRIC | Organizada por Andalucía TEAM

Martes 18

CURSO 100 GBC De 10:00 a 14:00 h. | AUDITORIO KÖMMERLINGOrganizada por Kömmerling/GBC

LA APORTACIÓN DE LOS PRODUCTOS A LA SOSTENIBILIDAD EN LA CONSTRUCCIÓNDe 10:00 a 14:00 h.AUDITORIO SCHNEIDER ELECTRICOrganizada por IECA

Miércoles 19

DÍA DE LA ARQUITECTURA. PRESENTACION DE LOS PROYECTOS DE LA

EDICION DEL SOLAR DECATHLON EUROPE 2O12

De 10:00 a 14:00 h. | AUDITORIO KÖMMERLINGOrganizada por SDE2012, COAM y Kömmerling

INSTALACIONES DE RÉGIMEN ESPECIAL SEGURAS Y EFICIENTES De 10:00 a 14:00 h.AUDITORIO SCHNEIDER ELECTRICOrganizada por APIEM

Jueves 20

SOLAR FOTOVOLTAICA, AUTOCONSUMO Y ENERGÍA SOSTENIBLE De 10:00 a 14:00 h. | AUDITORIO KÖMMERLINGOrganizada por UNEF

SMART CITY CENTRE De 10:00 a 14:00 h.AUDITORIO SCHNEIDER ELECTRICOrganizada por SDE2012 y Schneider Electric

Viernes 21

INDUSTRIALIZACIÓN DE VIVIENDAS De 10:00 a 14:00 h. | AUDITORIO KÖMMERLINGOrganizada por SDE 2012

LA OPCIÓN DEL FACILITIES MANAGEMENTDe 10:00 a 14:00 h.AUDITORIO SCHNEIDER ELECTRICOrganizada por SDE 2012

Lunes 24

LABORATORIO DE SOSTENIBILIDAD Y EL HOGAR EFICIENTE De 10:00 a 14:40 h.| AUDITORIO KÖMMERLINGOrganizada por Andalucía Team

PRESENTACIÓN MATELEC De 10:00 a 14:00 h.AUDITORIO SCHNEIDER ELECTRICOrganizada por IFEMA

FUTURO DEL SOLAR DECAHTLON EN EUROPA De 17:00 a 20:50 h.AUDITORIO SCHNEIDER ELECTRICOrganizada por ENERGY AVANTGARDE

Martes 25

PROGRAMA URSOS De 10:00 a 14:00 h.| AUDITORIO KÖMMERLINGOrganizada por IDAE

INTEGRACION DE RENOVABLES EN LA RED Y EFICIENCIA ENERGETICA EN VIVIENDASDe 10:00 a 14:00 h.AUDITORIO SCHNEIDER ELECTRICOrganizada por SCHNEIDER ELECTRIC

Miércoles 26

SISTEMA DE CERTIFICACIÓN AMBIENTAL DE EDIFICIOSDe 10:00 a 14:40 h.| AUDITORIO KÖMMERLINGOrganizada por Kömmerling

CONGRESO EUROPEO DE VIVIENDA SOCIALDe 10:00 a 14:00 h.AUDITORIO SCHNEIDER ELECTRICOrganizada por CECODHAS

Jueves 27

SOSTENIBILIDAD, ENERGÍA Y EDUCACIÓNDe 10:00 a 14:40 h.| AUDITORIO KÖMMERLINGOrganizada por SLOW ENERGY

EL FUTURO DE LA REHABILITACIÓN. CASA UPM/SDE2O12De 10:00 a 14:00 h.AUDITORIO SCHNEIDER ELECTRICOrganizada por ANNER

Viernes 28

JORNADA POR DETERMINARDe 10:00 a 14:40 h.| AUDITORIO KÖMMERLING

PRESENTACIÓN DE LA CASA !De 10:00 a 14:00 h.AUDITORIO SCHNEIDER ELECTRICOrganizada por Grupo ! UNIZAR

Page 17: visitingguide1.pdf

17

EQUIPOSPARTICIPANTES

tongjiteam para eco-house

china

andaluciateam patio 2.12

españa

grupo!_unizar casa !_unizar

españa

chibauniversity the omotenasi house

japón

teamecolar ecolar home

alemania

odooproject

odoo

hungría

rhônealpes canopea

francia

ceu teamvalencia smlsystem

españa

counter entropy team rwth aachenuniversity counter entropy housealemania

teambrasil ekó house

brasil

(e)coteam (e)co

españa

ehuteam ekihouse

españa

teamdtu fold

dinamarca

med initaly med in italy

italia

aquitainebordeauxcampussumbiosi

francia

americanuniversityin cairoarkan

egipto

cem+nem- cem’ casasem movimentoportugal

astonyshine astonyshine

francia-italia

prispa

prispa

rumanía

s01

s05

s09

s13

s17

s02

s06

s10

s14

s18

s03

s07

s11

s15

s19

s04

s08

s12

s16

Page 18: visitingguide1.pdf

18

”Para Eco-House” combina las estrategias paramétricas y ecológicas con la lógica del lenguaje arquitectónico del diseño de la casa. Sistemas ener-géticos tanto “pasivos” como “activos” han sido utilizados en este proyec-to. Más allá de los requisitos funcionales y ambientales, se ha creado un prototipo para disminuir la contaminación que producen las edificaciones.

El concepto de una piel multicapa surge de la combinación de la teoría Dao de la filosofía oriental y las teorías del filósofo francés Michel Fou-cault, especialmente las relativas a la autonomía en arquitectura.

Combinando los sistemas ambientales “activos” y “pasivos” en una rela-ción simbiótica entre sí, las dos filosofías se funden y se benefician de la interacción mutua.

Mediante la creación de los límites físicos de la estratificación del progra-ma surgen tres espacios intermedios. El primero se define mediante la interacción de la celosía externa y la fachada de cristal, creando una área semiabierta para la entrada y los eventos al aire libre. El siguiente límite encierra el espacio que define las necesidades funcionales de la casa.

El vacío entre estas funciones privadas crea un patio interior: un espacio privado en el corazón de la casa.

”Para Eco-House” se ha basado en 20 estrategias ecológicas para el diseño de su casa: paneles fotovoltaicos, sistema de colectores solares, paneles solares, sistema PVT, tratamiento de agua sucia y ventilación, sistema de filtración de los humedales, bomba de calor con la unidad de recuperación de calor, reciclaje de agua pluvial, evaporación de agua refri-gerada, sombra arquitectónica, ventilación de patio interior, verde vertical, sistema de piel composite, muro de graduación térmica VIP, sistema de control independiente de temperatura y humedad, estructura de bambú, muebles de bambú, control inteligente y sistema de iluminación LED. Por ejemplo, los paneles solares fotovoltaicos cuentan con un sistema moto-rizado, que ha sido desarrollado para posicionar los paneles en posición perpendicular a los rayos del sol la mayor parte del tiempo posible, con lo que se consigue un 25% más de eficiencia.

Planta

Sección

nombre del equipo nombre de la universidad

http://solardecathlon2012.tongji.edu.cn

nombre de la casa país

Tongji Universitytongjiteam

Para Eco-House china

AREA CONSTRUIDA 128 m2

VOLUMEN ACONDICIONADO 167,4 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 15.857 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 4.273 kWh/Año

CLASE DE FOTOVOLTAICA Silicio monocristalino y amorfo

POTENCIA PANELES FOTOVOLTAICOS 8,76 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,12 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO --

TRANSMITANCIA TÉRMICA DE SUELO 0,12 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,12 W/m2k

COSTE ESTIMADO 287.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 240.000 !

s01parcela

Page 19: visitingguide1.pdf

19

Team Rhône-Alpes propone Canopea®, un proyecto a escala urbana con el que responde a los actuales problemas de densidad de las ciudades en el corredor alpino, donde el suelo edificable escaso y caro debido al contexto geográfico. En un espacio urbano limitado por la presencia de montañas y ríos, necesitamos encontrar soluciones para vivir en ciudades densas, que, a su vez, nos sigan acercando a la naturaleza. Necesitamos el espacio privado para sentirnos como en casa y al tiempo que habitamos un bloque de vivien-das. Necesitamos reducir las inversiones y los costes de mantenimiento a causa de la evolución económica de nuestro país si queremos que la mayoría de nuestra población pueda acceder a un hogar con energía limpia.

Para lograr estos objetivos Team Rhône-Alpes ha ideado el concepto de Na-notorre.

Las Nanotorres son pequeñas torres que albergan una casa unifamiliar en cada piso. La planta superior acoge una lavandería común, una cocina de verano y una zona child-out para toda la comunidad. Un núcleo compuesto por las escaleras y el ascensor son comunes a las tres nanotorres. Además existen pasarelas que vinculan estos tres elementos. Invernaderos, zonas de almacenaje, y un sistema de reciclaje crean un entorno agradable. La gente puede disfrutar de todas las cualidades espaciales de una casa individual, viviendo en un centro urbano denso y compartiendo un ideal de comunidad.

Cada vivienda se organiza en torno a tres volúmenes que contienen los nú-cleos técnicos (equipos de aire acondicionado, baño, cocina), el dormitorio principal y una sala flexible, que puede ser utilizada como una salita de te-levisión, una biblioteca, una oficina o un dormitorio adicional. En medio de estos volúmenes, el espacio vital continuo ofrece fluidez. El espacio interior también puede expandirse al exterior. La terraza perimetral hace la sala más grande. Las celosías de vidrio proporcionan protección frente a los vientos de los días fríos y las lluvias. Estas celosías se deslizan para reflejar los rayos solares durante los días calurosos. El edificio se comporta de diferentes for-mas dependiendo de las estaciones climáticas.

Las nanotorres están integradas en el ecosistema urbano de la ciudad. La energía y la información se intercambian y mutualizan a través de smart grids. El objetivo es alcanzar un equilibrio óptimo puntual en función de las necesi-dades de calefacción, refrigeración, electricidad, movilidad, servicios y redes sociales en cada momento.

El equipo de Rhône-Alpes promueve esta estrategia territorial a favor del desarrollo de ciudades sostenibles mediante la racionalización del tamaño de las construcciones, la mutualización y el refuerzo de los enlaces sociales.

Planta

Sección

nombre del equipo nombre de la universidad

www.solardecathlon.fr

nombre de la casa país

École Nationale Supérieure d’Architecture de Grenoblerhône

alpes

canopea francia

AREA CONSTRUIDA 195,9 m2

VOLUMEN ACONDICIONADO 202,5 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 12.733 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 6.305 kWh/Año

CLASE DE FOTOVOLTAICA Silicio policristalino

POTENCIA PANELES FOTOVOLTAICOS 10,7 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,0875 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO Dato no facilitado

TRANSMITANCIA TÉRMICA DE SUELO 0,0872 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,0796 W/m2k

COSTE ESTIMADO 700.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 140.000 !

parcela

s02

Page 20: visitingguide1.pdf

20

Creemos que la sostenibilidad no es sólo una cuestión tecnológica. Odoo-project ofrece un nuevo y más sostenible estilo de vida saludable, pasando hasta un 50% de nuestro tiempo a la intemperie. Nuestra casa cuenta con un nuevo tipo de unidades funcionales al aire libre, que combinan las ven-tajas del estilo de vida tradicional y moderno. Para ello, hemos diseñado una cocina de verano y una zona de descanso donde nuestras actividades diarias (cocinar, comer, relajarse y trabajar) pueden llevarse a cabo con un mayor nivel de comodidad.

Los espacios de la casa se utilizan en diferentes intensidades según las diferentes estaciones. Pasamos la mayor parte de nuestro invierno en el interior de la casa con calefacción, mientras que en verano pasamos la mayor parte del tiempo en la terraza. La primavera y el otoño, períodos de transición, o en las noches de verano estas dos zonas llegan a ser una única.

Hemos integrado los paneles solares del tejado y la fachada para conver-tirlos en los elementos estéticos y arquitectónicos dominantes, definiendo la apariencia de la casa.

Odooproject cuenta con un único sistema pasivo en superficie de calen-tamiento-enfriamiento. Resuelve el problema de falta de masa térmica me-diante la suma de tanques llenos de agua, que procede de la lluvia. El tanque está conectado a una tubería que se distribuye en suelo y techo mediante un dispositivo de intercambiador de calor.

En verano podemos enfriar el agua por la noche mediante aspersión en el techo para reducir el calor que hay durante el día. En invierno, extraemos la carga térmica del suelo y la transmitimos al depósito regulador para usarla durante la noche para calefacción.

Para aprovechar al máximo este avanzado sistema mecánico se creó una única automatización utilizando las herramientas existentes, que se pueden configurar libremente para programar nuestra propia aplicación.

La casa posee una componente característica: el muro de verano, que determina el diseño de la casa y alberga una serie de características que la hacen diferente. Esta casa designa el espacio de la terraza e incorpora los elementos necesarios para la utilización flexible del espacio de la co-cina de verano. Los paneles solares del muro vertical producen energía, sobre todo en invierno, que complementa perfectamente los paneles de la cubierta. De este modo, el cuadro de distribución eléctrica, las unidades mecánicas y los grandes tanques requeridos por el sistema de refrigera-ción pasiva se colocan también en este muro vertical.

Planta

Sección

nombre del equipo nombre de la universidad

www.odooproject.com

nombre de la casa país

budapest universityof technology y economicsodooproject

odoo hungría

AREA CONSTRUIDA 92,65 m2

VOLUMEN ACONDICIONADO 116 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 13.301 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 5.775 kWh/Año

CLASE DE FOTOVOLTAICA Silicio monocristalino y módulo de película fina (a-Si/"-Si)

POTENCIA PANELES FOTOVOLTAICOS 9,3 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,158 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 0,6 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,145 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,153 W/m2k

COSTE ESTIMADO 360.100 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 278.790 !

s03parcela

Page 21: visitingguide1.pdf

21

Una mirada educada en la innovación.Nuestro objetivo principal es repensar la innovación mediante la búsqueda de soluciones alternativas de bajo presupuesto a los costosos sistemas y el diseño de una casa solar más accesible que suponga una alternativa en pro de la recuperación de los entornos rurales tradicionales.Desde la cima...La envolvente es el principal elemento innovador de PRISPA house. No es sólo una cubierta, sino el elemento que protege la vivienda, recoge la energía del exterior y la transforma....a la estructura ...Con el fin de que nuestra casa sea fácil de montar y desmontar, y con la finalidad de hacer posible su ampliación, la estructura de la casa es modular y simple.Por lo tanto, se decidió utilizar vigas de doble T (con alma de OSB y ba-samento de madera). Éstas tienen una distribución optimizada del material en sección y un ratio peso/resistencia muy bueno, mientras que su escaso peso facilita en gran medida su manejo. Las vigas están recubiertas en ambas caras con OSB 4, que utiliza agentes no tóxicos de unión y da rigi-dez estructural al panel. Toda la estructura se coloca sobre una plataforma entablada hecha a partir de una densa red de viguetas. Además, este tipo de vigas se utilizan también para generar los paneles del techo....al corazón técnico ...En función de las necesidades, se puede usar el intercambiador de calor aire-a-aire (o el módulo de recuperación de calor) en modo de recupe-ración de calor con el objetivo de garantizar el aire fresco que asegure un entorno higiénico, y en el modo de refrigeración libre (utilizando el by-pass) y de esta manera disminuir la carga de calor durante el verano, cuando la temperatura del aire exterior baja de 20ºC.Asimismo, se ha cuidado mucho la colocación estratégica de los materia-les de inercia térmica: en el suelo, cerca de las superficies acristaladas del sur (piedra de 1m de ancho), con el fin de absorber el calor natural del sol o de los paneles radiantes, y en las paredes (arcilla con acabado para regulación de humedad)....para el uso diarioPRISPA House está diseñada con el objetivo de ser un hogar y no sim-plemente una casa de exhibición. Su espacio cumple con los estándares actuales de confort gracias al uso de tecnología y materiales. Todo es una cuestión de simplicidad en el diseño y del estilo de calidad de vida.

Planta

Sección

nombre del equipo nombre de la universidad

www.prispa.org

nombre de la casa país

“ion mincu” university of architecture and urbanism technical university of civil engineering of bucharest university politehnica of bucharest

prispa

prispa rumanía

AREA CONSTRUIDA 116,85 m2

VOLUMEN ACONDICIONADO 260 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 11.594 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 6.435 kWh/Año

CLASE DE FOTOVOLTAICA Silicio monocristalino

POTENCIA PANELES FOTOVOLTAICOS 8,0 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,152 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 0,805 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,142 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,171 W/m2k

COSTE ESTIMADO 125.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 70.000 !

parcela

s04

Page 22: visitingguide1.pdf

22

La filosofía de la Casa Pi y del grupo que la ha desarrollado se basa en su creencia de que es necesario reaccionar ante la situación actual, porque las cosas que se pueden hacer hoy son importantes para el presente. Así que la estrategia principal es experimentar con la tecnología y los mate-riales que se encuentran actualmente en el mercado, intentando realizar el cambio ahora y no mañana. Las tres líneas de diseño de la casa son las siguientes:

Factor de Forma: La forma geométrica que tiene una mejor relación entre la superficie exterior y el volumen interno es la esfera (factor de forma o F.F.* 0,48), pero la mayoría de los espacios interiores de este tipo de volúmenes no son útiles. Es por esta razón que se utilizó la siguiente forma geométrica con mejor factor de forma, que es el cilindro (F.F. 0,56).

La masa térmica en un sistema portátil y prefabricado: La inercia térmica en sistemas prefabricados es una de las mejores estrategias pasivas para mantener el confort interior de una vivienda. Ésa es una condición real en la construcción tradicional, pero en los sistemas prefabricados no es algo común y ésta es una innovación. Para la envolvente, el equipo ha crea-do un panel sándwich hecho de tres elementos: cemento reforzado con fibra de vidrio (GRC) aislado con corcho y usando materiales de cambio de fase que mejoran la inercia térmica del GRC. Ésta es una innovación importante, ya que mezcla materiales de mundos diferentes dejando de lado algunos prejuicios.

I+D+I en eficiencia de la energía solar: Hemos optado por la trigenera-ción o refrigeración combinada de calor y electricidad. De este modo, la casa está preparada para usar la generación simultánea de electricidad, y calefacción y refrigeración provenientes del colector solar. En este caso emplea el rendimiento de los paneles fotovoltaicos con un aislante trans-lúcido.

*Factor de forma. Se trata del cociente entre la superficie de la envolvente del edificio y su volumen. Al reducir la superficie de contacto con el exterior se logra tener menos pérdidas

de calor entre el interior y el exterior.

Planta

Sección

nombre del equipo nombre de la universidad

www.unizarcasapi.com

nombre de la casa país

Universidad de ZaragozaGrupo !_Unizar

House !_Unizar españa

s05parcela

AREA CONSTRUIDA 64,6 m2

VOLUMEN ACONDICIONADO 108 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 10.080 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 4.728 kWh/Año

CLASE DE FOTOVOLTAICA Silicio policristalino

POTENCIA PANELES FOTOVOLTAICOS 8,8 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,27 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 2.4 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,31 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,3 W/m2k

COSTE ESTIMADO 122.450 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 85.715 !

Page 23: visitingguide1.pdf

23

s06parcela

Sumbiosi es una casa que evoluciona para implementar la calidad de vida medioambiental en nuestro desarrollo cotidiano. La casa está pensada como un espacio que se puede abrir, cerrar y separar según las estaciones, la hora del día o los eventos que se desarrollan en ella. En este espacio flexible, Sumbiosi crea una nueva forma de vida en relación con el medio ambiente y la naturaleza. Debido a la modulación de la casa, Sumbiosi cum-ple el objetivo de reducir la dispersión urbana, ya que ofrece más funciones en un espacio pequeño.

La investigación para el ahorro de energía se ha integrado en todas las innovaciones tecnológicas que se encuentran en la casa. Las propuestas se articulan entorno a los siguientes tres ejes:

La energía es proporcionada por un sistema solar que hace uso de lentes de Fresnel, que concentran el equivalente de 500 veces los rayos del sol para reducir el área de los paneles fotovoltaicos. Un sistema de seguimien-to completa esta tecnología para optimizar la eficiencia del sistema. Esto permite crear un sistema de cogeneración 3 en 1; es decir, un sistema de producción de electricidad, de agua caliente sanitaria y de transferencia de calor mediante fluido.

La domótica de la casa está diseñada para facilitar la relación entre la vivien-da y el habitante. Permite crear una relación entre las personas y la tecnolo-gía, por lo que puede ser utilizada de forma sencilla por todas las personas.

Sumbiosi utiliza sistemas pasivos y semi-pasivos. En el techo se localiza el sistema Ventec, que se utiliza para crear un efecto Venturi y optimizar así la ventilación natural, lo que permite enfriar la casa durante las noches de verano. Sumbiosi también emplea un sistema de refrigeración basado en materiales de cambio de fase. Este sistema se desarrolla como un fenóme-no natural y sólo necesita un ventilador para su funcionamiento.

También se han integrado sistemas para implementar el ciclo del agua en la casa mediante un “filtro de lombrices” que recicla las aguas grises. Esta instalación funciona con el trabajo de lombrices de tierra y las capas sedi-mentarias de filtrado de agua. El agua de drenado del tanque es equivalente a la red de agua. Esta agua se reutiliza para el riego de la cubierta vegetal o bien para el lavado de automóviles.

Más que integradas, todas estas tecnologías pasan a formar parte de la arquitectura, ya que son elementos principales del diseño de la casa. Sum-biosi es en realidad una combinación entre el ser humano, la arquitectura y la tecnología.

Planta

Sección

nombre del equipo nombre de la universidad

www.sumbiosi.com

nombre de la casa país

bordeaux universityaquitaine bordeaux campus

sumbiosi francia

AREA CONSTRUIDA 83 m2

VOLUMEN ACONDICIONADO 217 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 9.550 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 5.720 kWh/Año

CLASE DE FOTOVOLTAICA Silicio policristalino

POTENCIA PANELES FOTOVOLTAICOS 6,2 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,157 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 1,1 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,146 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,146 W/m2k

COSTE ESTIMADO 150.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 70.000 !

Page 24: visitingguide1.pdf

24

998-2758_ES_2012_A-2.indd 1

s07parcela

SMLsystem es una propuesta de vivienda que tiene como punto de par-tida la prefabricación e industrialización. Prefabricar implica pensar en objetos con cierta capacidad de reproducción material y/o fundamental, abriendo así las puertas a la generación de objetos o proyectos base, in-dicadores de una serie industrial. En el caso de la SMLsystem los objetos generadores de la serie industrial son el contenedor y los box húmedos.

SMLsystem ha sido diseñada para minimizar el consumo energético, por ello todos los elementos consumidores de energía tienen una elevada efi-ciencia energética. Además se ha programado su funcionamiento para optimizar su rendimiento.

La energía solar es la principal fuente de alimentación de SMLsystem. La casa cuenta con 21 paneles fotovoltaicos en cubierta y dos fachadas fotovoltaicas al este y oeste. También el ACS es suministrado mediante energía solar gracias a dos paneles solares térmicos.

El sistema de ventilación de SMLsystem está diseñado para renovar el aire manteniendo las condiciones de confort en el interior. Sin embargo, el intercambio de aire con el exterior puede suponer expulsar aire climatiza-do para introducir aire que hay que volver a climatizar, con el consiguiente coste. Por ello se ha instalado un recuperador de calor que traspasa el calor/frío del aire expulsado al aire impulsado con una eficiencia del 92%.

Todas las instalaciones de la SMLsystem están vinculadas a un modulo de autoaprendizaje dentro del sistema CAES (Computer Aided Energy Saving). Este sistema recopilará datos de uso de las instalaciones que se usarán para mejorar su funcionamiento. Por ejemplo, el sistema apagará la luz del baño si detecta que no hay nadie en casa.

La eficiencia de un sistema de climatización varía con la temperatura ex-terior. Para poder aumentar esta eficiencia se ha diseñado un sistema de climatización con varios modos de funcionamiento, para poder usar en cada momento el de mayor eficiencia. Además cuenta con dos depósitos de acumulación térmica mediante material de cambio de fase.

Planta

nombre del equipo nombre de la universidad

http://solardecathlon.uch.ceu.es/

nombre de la casa país

universidad ceu cardenal herreraceu teamvalencia

sml system españa

AREA CONSTRUIDA 124,6 m2

VOLUMEN ACONDICIONADO 141,25 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 7.680 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 4.690 kWh/Año

CLASE DE FOTOVOLTAICA Silicio policristalino y CIGS

POTENCIA PANELES FOTOVOLTAICOS 7,12 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,13 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 0,8 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,77 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,35 W/m2k

COSTE ESTIMADO 194.856 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 108.860 !

Alzado

Page 25: visitingguide1.pdf

25

Gestionar el complejo control ambiental de un edificio y cumplir con los objetivos de eficiencia energética no es tarea fácil. Nuestra arquitectura de gestión eficiente de la energía EcoStruxure™ le permitirá hacerlo de manera inteligente mediante la integración de los sistemas del edificio en una única plataforma IP.

Soluciones y servicios integrales para la gestión global de la energía: Con EcoStruxure™, la arquitectura de soluciones de gestión integral de la energía de Schneider Electric™, su empresa puede alcanzar un ahorro de energía de hasta el 30%.Los servicios de gestión energética Energy STEP™ le permitirán conocer la situación energética de su empresa, estructurar una estrategia que se ajuste a sus objetivos, implementar los proyectos de Eficiencia Energética con los mejores retornos de la inversión para poder alcanzar beneficios financieros y de imagen.

Schneider Electric™ con su oferta unificada Energy STEP™ le puede ayudar a definir un plan energético personalizado que le permitirá mejorar la productividad de su compañía.

Gracias a Energy STEP™ y EcoStruxure™ el ahorro no tiene por qué terminar ahí. Veamos juntos qué más podemos hacer por la gestión eficiente de su organización.

30%

Reducir su factura eléctrica el 30%* es solo el comienzoImagine lo que podemos hacer por el resto de su empresa

Arquitecturas activas de gestión de la energía, desde la generación hasta el consumo™

¡Conozca más la Eficiencia Energética Activa!Descargue gratuitamente el documento técnico “Ahorro energético permanente gracias a la Eficiencia Energética Activa” (valorado en 170 ! ) y participe en el sorteo de un iPad.

Visite www.SEreply.com Código de promoción 24190p

©2012 Schneider Electric. Todos los derechos reservados. Schneider Electric, EcoStruxure y Active Energy Management and Power Plant to Plug son propiedad de Schneider Electric Industries SAS o de empresas del Grupo Schneider Electric. Todas las otras marcas registradas pertenecen a sus respectivos propietarios. Schneider Electric España, S.A. Bac de Roda, 52, edificio A, 08019 Barcelona. Tel.: 93 484 31 00. · www.schneider-electric.com · Bases del sorteo depositadas ante notario.*La arquitectura EcoStruxure reduce el consumo de energÌa hasta un 30%. · 998-2758_ES

Centros de datos Desde el rack hasta la fila, la sala y el edificio, el uso de la energía y la disponibilidad de estos entornos interconectados son permanentemente monitorizados y ajustados en tiempo real.

IndustriaLos protocolos estándar abiertos de comunicación IP permiten la gestión de todos los procesos automatizados en un tiempo récord, aumentando la productividad y maximizando la eficiencia energética

Edificio La integración inteligente de los sistemas del edificio como el HVAC, el control de accesos, la gestión de la seguridad, la videovigilancia, la protección contra incendios, las telecomunicaciones, el mantenimiento, la gestión de la energía y el control de la iluminación de toda la empresa, permiten reducir los costes de formación, funcionamiento, mantenimiento y energía.

998-2758_ES_2012_A-2.indd 1 28/08/12 13:23

Page 26: visitingguide1.pdf

26

El diseño de la “ Counter Entropy House “ se basa en generar un ciclo eficiente y cerrado de los recursos, optimizando la vida y la energía de los elementos que componen un edificio, teniendo en cuenta la producción, el transporte y el final de la vida útil de los materiales. Ciertos materiales de la casa están hechos de material reciclado. También se ha pensado de forma directa o indirecta en el futuro reciclaje o reutilización de la casa.

No sólo la arquitectura sino también el diseño interior ponen de manifiesto la combinación única de configuraciones multifuncionales y el ahorro de espacio para crear el máximo espacio mediante el uso óptimo y la adap-tación a las situaciones actuales. Al almacenar los cerramientos de cristal en los bloques funcionales, la zona privada se amplia, delimitándose por el techo en voladizo que garantiza la máxima protección del espacio privado a través de la cortina móvil.

Los sistemas de energía excepcionales y únicos desarrollados por el equi-po pueden, de acuerdo con las normas de SDE, ser clasificados como sistemas “pasivos”. La energía se transmite sólo por la transferencia de calor al líquido caloportador. El único consumo de energía eléctrica es causado por las bombas de circulación para los diferentes circuitos.

La “ Counter Entropy House “ se apoya en la idea de un sistema de refrigeración térmica que es mucho más sostenible que los sistemas de climatización eléctricos tradicionales. Por lo tanto, uno de los principales objetivos de la casa es no utilizar bomba de calor. De esta manera, un uso serio y práctico de la energía solar térmica, durante el día y la noche, se utiliza para proporcionar la energía necesaria para el aire acondicionado. La energía solar térmica aporta ventajas significativas sobre el uso exclu-sivo de las células fotovoltaicas.

El segundo sistema, que contribuye a alcanzar las condiciones de confort, es el techo de refrigeración alimentado por un circuito líquido. En unos tanques enfriados por vaporización con agua de lluvia se almacena agua mezclada con el Material de Cambio de Fase, que se hace circular por el techo, con lo que consigue enfriar el ambiente interior por el método de radiación.

nombre del equipo nombre de la universidad

www.counter-entropy.org

nombre de la casa país

rwth aachen universitycounter entropy teamrwth aachen university

counter entropy house alemania

Sección

Planta

s08parcela

AREA CONSTRUIDA 49,1 m2

VOLUMEN ACONDICIONADO 170,25 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 8.886,6 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 6.365 kWh/Año

CLASE DE FOTOVOLTAICA Silicio monocristalino

POTENCIA PANELES FOTOVOLTAICOS 6,75 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,092 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 0,7 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,105 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,075 W/m2k

COSTE ESTIMADO 542.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 241.000 !

Page 27: visitingguide1.pdf

27

s09parcela

nombre de la universidad

paísnombre de la casa

nombre del equipo

Este prototipo desarrolla un concepto innovador de construcción de una vivienda basado en módulos habitacionales completamente prefabrica-dos, generando un producto de alta calidad y versatilidad (potencial de marketing): los mismos módulos prefabricados pueden estar colocados de diversas maneras para satisfacer distintas necesidades. El usuario puede componer libremente los espacios de la casa mediante un sencillo y rápido proceso de montaje-desmontaje.

Debido a la ausencia de cimentación y al uso de soportes sobre el terreno conseguimos un edificio sin huella en el ambiente o residuos tras el des-montaje de la casa.

Durante los días de invierno, el patio se convierte en un invernadero, sus acristalamientos capturan la radiación solar y el aire calentado es con-ducido a las habitaciones. Por la noche, las aperturas del patio y de las habitaciones permanecen cerradas, para disminuir la pérdida energética a través de paredes.

Durante los días de verano, la pérgola controla la radiación solar sobre la cubierta, plegando los paneles de cristal y “abriendo” el patio, permitiendo el aire fluir a través de las paredes. Por la noche, la cubierta de cristal se extiende y la corriente de aire pasa a ser horizontal a través de las apertu-ras de las paredes del patio.

El agua de lluvia es recogida por las cubiertas inclinadas y usada en los sistemas de disipación de energía. Los paneles cerámicos de las facha-das están conectados a un sistema de goteo de agua que permite crear un efecto de evapotranspiración para el enfriamiento de la cámara de aire, reduciendo la carga térmica de la casa.

El sistema fotovoltaico tiene una doble función: formación de cubierta y generación de electricidad. Los paneles fotovoltaicos están situados so-bre pequeños soportes en las cubiertas de los módulos habitacionales creando una cámara de aire ventilada,. Los paneles situados encima del Módulo Técnico son unidades híbridas, de tal manera que bajo las unida-des fotovoltaicas se encuentran paneles solares para el acondicionamien-to del agua.

www.andaluciateam.org

patio 2.12 españa

universidades de sevilla,jaén, granada y málagaandalucía

team

Sección

Planta

AREA CONSTRUIDA 107.13 m2

VOLUMEN ACONDICIONADO 128.64 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 16.378,82 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 2.982,43 kWh/Año

CLASE DE FOTOVOLTAICA Silicio monocristalino

POTENCIA PANELES FOTOVOLTAICOS 11,3 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,20 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 0,70 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,12 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,18 W/m2k

COSTE ESTIMADO 500.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 150.000 !

Page 28: visitingguide1.pdf

28

Team Brasil ha proyectado Ekó House como un enfoque brasileño hacia una casa integrada: una casa que contribuye a mejorar la calidad de vida sin dañar la naturaleza. Brasil debería ser un ejemplo para el crecimiento económico sostenible y, para ello, las nuevas formas de vida son relevan-tes para introducir pequeños cambios en el comportamiento cotidiano. De este modo, es imprescindible tener en cuenta la sostenibilidad en tér-minos más amplios, incluyendo las dimensiones sociales, económicas y culturales.

La singularidad de la construcción Ekó se fundamenta en una mayor pre-ocupación por el proceso de diseño y construcción de alta tecnología y sistemas innovadores, y por esta razón enfatizamos en el concepto de sostenibilidad humana. El déficit de vivienda en Brasil es muy elevado y los métodos de construcción dependen de mano de obra no cualificada. Por lo tanto, las innovaciones fueron diseñadas para atajar el déficit de vivien-da, cambiando la forma en que ésta está pensada y construida. Los méto-dos de prefabricación reducen el tiempo de construcción y los costes, al tiempo que mejoran las competencias laborales mediante la introducción de nuevos procesos de formación. Los tableros prefabricados de madera y OSB con aislamiento de lana de vidrio se pueden ensamblar en pocos días in situ. Las tuberías y el cableado entre los paneles y el revestimiento se pueden conectar fácilmente entre paneles a través de una estructura metálica. La madera es una opción factible que también contribuye a me-jorar el conocimiento y la gestión de los recursos naturales brasileños. Ofrece condiciones excepcionales de confort con un consumo de energía bajo, utilizando lana de vidrio y aerogeles para el aislamiento, ventanas de doble cristal y puertas, así como carpinterías con baja transmisión de calor.

El agua de lluvia se recoge para determinados usos y un sanitario ecológi-co seco elimina la necesidad de agua en las descargas. El agua residual es tratada mediante un sistema de humedales locales de plantas macro-fitas que filtran y eliminan la carga orgánica de las aguas reutilizadas, de acuerdo con la legislación local. Este sistema reduce en gran medida la necesidad de agua potable o el tratamiento centralizado de aguas residua-les, una importante mejora en la infraestructura de la vivienda, particular-mente en las áreas medioambientalmente vulnerables en Brasil.

Los sistemas de información y domótica acercan a los usuarios a nuevas formas de relación con los ciclos naturales y de vida. Los sistemas de información de Ekó House pueden indicar los momentos más óptimos para realizar determinadas actividades domésticas, de acuerdo a las con-diciones climáticas futuras.

Planta

Sección

nombre del equipo nombre de la universidad

www.ekobrasil.org

nombre de la casa país

universidade federal de santa catarinauniversidade de sÃo pauloteam brasil

ekó house brazil

s10parcela

AREA CONSTRUIDA 47,59 m2

VOLUMEN ACONDICIONADO 119,49 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 21.157 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 6.836 kWh/Año

CLASE DE FOTOVOLTAICA Silicio monocristalino

POTENCIA PANELES FOTOVOLTAICOS 11,04 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,15 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 1,3 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,17 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,10 W/m2k

COSTE ESTIMADO 450.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN --

Page 29: visitingguide1.pdf

29

(e)co alcanza el equilibrio medioambiental trabajando con tres elementos: energía, materia y agua. La casa produce el 100% de la energía que con-sume a través de los paneles fotovoltaicos. Con el fin de alcanzar este ob-jetivo, el prototipo reduce el consumo de energía utilizando la piel exterior como una máquina de climatización, pero sin consumo. En invierno fun-ciona como un invernadero, acumulando calor, y en verano los módulos solares producen sombra en el interior y también permiten la ventilación natural cruzada. La casa (e)co reduce hasta un 50% del consumo energé-tico mediante el aprovechamiento total de los sistemas bioclimáticos. Los módulos están equipados con maquinaria de aire acondicionado diseñado por el equipo (e)co. La maquinaria consiste en un tanque de grava, que almacena el calor en invierno y frío en verano.

Otro de los objetivos (e)co es crear un ciclo cerrado en el uso del agua. Para ello, la casa recoge el agua de lluvia y también las aguas grises. A continuación, este agua es tratada con métodos naturales de filtración y biorremediación en un humedal. El ahorro final de las aguas limpias es de hasta un 70%. Finalmente, la casa (e)co es casi totalmente reutilizable o reciclable. Los materiales de la piel exterior son todos reutilizables y des-montables. Los módulos de madera interiores son de materiales orgáni-cos biodegradables. La estrategia va más allá de los materiales de residuo cero. Por lo tanto (e)co recupera muebles abandonados, los repara y los utiliza en la casa.

En la casa de la UPC, el equilibrio social está representado por el usuario activo de tres maneras. En primer lugar, los espacios indefinidos que los usuarios pueden utilizar de acuerdo a sus necesidades. Los módulos y los espacios intermedios están diseñados para cambiar de acuerdo a las estaciones, el crecimiento de la familia o las necesidades de los usuarios. En segundo lugar, estos espacios representan una nueva manera de vivir, de manera confortable y con una privacidad gradual. En tercer lugar, el usuario siempre está informado de los parámetros de la casa a través de la domótica con el fin de hacerlo más eficiente y más sostenible.

Planta

Sección

nombre del equipo nombre de la universidad

www.sdeupc.com

nombre de la casa país

Universitat Politècnica de Catalunya (e)co team

(e)co españa

s11parcela

AREA CONSTRUIDA 150 m2

VOLUMEN ACONDICIONADO 104,5 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 5.900 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 4.222 kWh/Año

CLASE DE FOTOVOLTAICA Silicio monocristalino

POTENCIA PANELES FOTOVOLTAICOS 4,6 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,331 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 0,25 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,302 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,302 W/m2k

COSTE ESTIMADO 150.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 110.000 !

Page 30: visitingguide1.pdf

30

El equipo de Roma centra el diseño de MED in Italy en cinco puntos, esenciales para crear la casa mediterránea del mañana.

Las casas hechas de piedra o muros de mampostería funcionan bien como masas térmicas que garantizan el confort en invierno y absorben las cargas térmicas en verano. Las construcciones de madera son bien reci-bidas en el mercado, son fáciles de transportar y montar, pero su masa es baja en comparación con la mampostería tradicional. Una posible solución a este problema consistiría en añadir capas a la pared, además de los paneles aislantes, y posteriormente, una vez que la casa está montada e instalada en el sitio, rellenar la cámara de aire con materiales pesados.

Nuestra casa produce toda la energía necesaria para su funcionamiento diario, y aún más. El diseño altamente integrado de la superficie fotovol-taica de la casa podría aprovechar ambas innovaciones fotovoltaicas: la generación de energía de la radiación difusa, y no sólo directa, y la posi-bilidad de contar con superficies de color captadoras.

Los objetivos de la casa mediterránea del futuro son la reducción de cos-tes, la optimización del rendimiento y la reducción del tiempo de cons-trucción. Se logra a través de una estrategia de prefabricación avanzada.

Una cuidadosa selección de materiales de construcción es la respuesta a la solicitud de un balance honesto con el medio ambiente. La elección más coherente, en ese sentido, es el uso de materiales naturales pro-cedentes de fuentes renovables y reutilizables al final del ciclo de vida edificio y reciclables al final del ciclo de vida del producto.

La eficiencia de un edificio también pasa a través de su densidad po-tencial. No solo permite un menor consumo de suelo, sino también una menor pérdida térmica y una reducción de costos de construcción. Es crucial, entonces, que las características tipológicas y constructivas de las nuevas casas permitan agregarlas.

M E D

nombre del equipo nombre de la universidad

www.medinitaly.eu

nombre de la casa país

università degli studi di roma tresapienza università di romafree university of bozenfraunhofer italy

med in italy

med in italy italia

Planta

Sección

s12parcela

AREA CONSTRUIDA 75,57 m2

VOLUMEN ACONDICIONADO 139,48 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 9.330 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 5.070 kWh/Año

CLASE DE FOTOVOLTAICA Silicio policristalino

POTENCIA PANELES FOTOVOLTAICOS 11,4 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,177 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 1,25 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,14 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,14 W/m2k

COSTE ESTIMADO 160.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 125.000 !

Page 31: visitingguide1.pdf

31

Omotenashi pretende transmitir seria y sinceramente un sentimiento de consideración a la gente con la que se encuentra. Este sentimiento forma parte de las tradiciones japonesas y sus prácticas, como la ceremonia del té o los arreglos florales. Omotenashi house es un nuevo tipo de vivienda y estilo de vida centrados en el desarrollo de la energía y la autosuficiencia alimentaria. Naturaleza – La vida con PlantasOmotenashi house plantea un nuevo experimento consistente en reintro-ducir la agricultura en las viviendas de nuestros pueblos y ciudades. La factoría de cultivos se utiliza para un desarrollo agrícola seguro, rápido y eficiente. Debido al envejecimiento de la población japonesa, se ha pro-ducido un descenso en la población agrícola activa y, particularmente, en la población agrícola de nuestra zona. Estamos proponiendo una nueva manera de vivir en la que las plantas pasan a formar parte del entorno cotidiano.Engawa – Enlace con el exteriorÉste es un “espacio de encuentro” que existe desde la antigüedad en los edificios japoneses. Constituye el punto de reunión no sólo de las perso-nas, sino también de la naturaleza, del transcurso del tiempo e, incluso, de la propia vida. Es también un espacio intermedio que conecta el interior con el exterior de la casa. Aquí se puede disfrutar de actividades variadas, como cultivar plantas o disfrutar de un té con los vecinos. Es un lugar para disfrutar la vida diaria. De esta manera, y gracias a los tatamis variados que se disponen en la engawa, los habitantes de la casa pueden disfrutar de un abanico variado de entornos vitales.Sol – Salud y sostenibilidadMaximizando el uso de energía solar, diseñamos una casa que es tan beneficiosa para el medio ambiente como para la salud. La casa está construida con precisión, mediante unidades robóticas que reducen el consumo de energía y las emisiones de CO2 durante su producción. De-bido al uso de tejas formadas por paneles solares, producimos 1,7 veces la capacidad eléctrica de estos mismos paneles, al tiempo que logramos una apariencia de tejado tradicional japonés. Además, El Centro de Me-dicina Preventiva de la Universidad de Chiba ha estado trabajando en colaboración con la industria para estudiar el diseño futuro de la casa saludable y de la ciudad. Aplicando los resultados de sus investigaciones, Omotenashi emplea materiales como el tatami japonés y la cubierta reci-clada para regular el ambiente interior y producir bajo VOC. Todos estos materiales son sostenibles y biodegradables.

Planta

Sección

nombre del equipo nombre de la universidad

http://sde.chiba-u.jp

nombre de la casa país

chiba universitychibauniversity

the omotenashi house japón

s13parcela

AREA CONSTRUIDA 54,38 m2

VOLUMEN ACONDICIONADO 107,8 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 13.374 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 8.302 kWh/Año

CLASE DE FOTOVOLTAICA Silicio amorfo y microcristalino

POTENCIA PANELES FOTOVOLTAICOS 11,35 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,137 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 0,70 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,196 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,192 W/m2k

COSTE ESTIMADO 500.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 250.000 !

Page 32: visitingguide1.pdf

32

Más que una casa móvil, el modelo “cem SDE” es una casa que se mue-ve de acuerdo con el movimiento del Sol y las fluctuaciones de la luz no solamente para optimizar el aprovechamiento de la energía solar (más de un 40% de producción de energía eléctrica), sino también para reducir el consumo térmico en un 80% y las necesidades de iluminación interior en aproximadamente un 30%, animorando así el impacto ambiental.

La casa está envuelta por una piel revestida por paneles fotovoltaicos, que la protege y la alimenta. La casa reacciona con el movimiento del sol y la envolvente revestida por los paneles puede moverse sobre dos ejes, por lo que se adapta a las necesidades del verano y invierno.

La casa se alimenta del sol, siguiéndolo desde que amanece hasta el atar-decer con un movimiento de aproximadamente de 180º. Este comporta-miento “de girasol”, combinado con el movimiento de la cubierta, maximiza las ganancias solares.

Con este sistema se alcanza una producción de energía eléctrica dos ve-ces y media superior a las necesidades de consumo de la vivienda, consi-derando que el movimiento de rotación consume apenas el equivalente a una lámpara de seis bombillas y el movimiento de la envolvente consume menos que una plancha.

En todo momento los movimientos de la casa y sus elementos generan nuevos espacios, interiores y exteriores, adaptando la casa a sus habitan-tes. La perspectiva del habitante cambia a lo largo de los días.

En este proyecto se aplican materiales de origen y tradición portugueses, como el corcho para los revestimientos interiores y exteriores, y la madera para la estructura de la casa, dos materiales con una gran capacidad de aislamiento térmico y acústico y altamente sostenibles.

La estructura modular ha sido diseñada para adaptar la casa a las nece-sidades de sus residentes, con una evolución pareja a la de la familia. La casa puede crecer o reducir dependiendo del estilo de vida y las exigen-cias de la familia en las diferentes etapas de su vida.

Planta

Sección

nombre del equipo nombre de la universidad

www.casasemmovimento.com

nombre de la casa país

Universidade do Portocem+nem-

cem’ casas em movimento portugal

s14parcela

AREA CONSTRUIDA 83,50 m2

VOLUMEN ACONDICIONADO 123 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 12.220 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 3.885 kWh/Año

CLASE DE FOTOVOLTAICA Silicio policristalino

POTENCIA PANELES FOTOVOLTAICOS 9,24 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,26 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 1,0 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,48 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,33 W/m2k

COSTE ESTIMADO 300.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 150.000 !

Page 33: visitingguide1.pdf

33

Creamos un futuro saludableKÖMMERLING te ayuda a crear un espacio de tranquilidad y bienestar en tu vida, preservando a la vez los recursos naturales del planeta.

Los sistemas para ventanas KÖMMERLING utilizan materiales 100 % reciclables y libres de plomo, que consiguen ahorrar energía y reducir las emisiones de CO2 gracias a su capacidad aislante.

KÖMMERLING, marca pionera en la protección del medio-ambiente, sigue un ambicioso Programa de Desarrollo Sostenible y cuenta con el Sello de Gestión Medioambiental de Aenor que certifica su compromiso.

P R O G R A M A D E

Desarrollo Sostenible de KÖMMERLING

Participa en el PREMIO KÖMMERLING a la casa favorita del público

! " # $ % & ' ( " ) % $ * % + ' & ' " , * ) - ,*

www.viviendasaludable.es/solar-decathlon

www.kommerling.es

Page 34: visitingguide1.pdf

34

La estrategia principal de la casa es reducir el consumo energético, apro-vechar los recursos naturales del lugar donde se construya y el uso de sistemas innovadores para crear las condiciones adecuadas para vivir

Para lograr esta estrategia principal, la casa tiene un diseño flexible que puede adaptarse a las exigencias del clima y el usuario. Esta adaptación permite que las condiciones sean confortables en el interior de la casa tanto en verano como en invierno.

Uno de los sistemas innovadores utilizados es la fachada de doble capa. La piel interior consta de superficies de vidrio y los paneles exteriores, de acero perforado. Las perforaciones de diferentes tamaños, que crean un patrón personalizado, ayudan a controlar la incidencia solar en el interior. Estas capas son móviles, por lo que la casa puede tener configuraciones diferentes con el fin de ajustarse a las condiciones climáticas exteriores. La casa puede abrirse a la terraza, reforzando el concepto de flexibilidad.

El diseño de la estructura crea un espacio interior continuo y el mobiliario no es estático, por lo que el usuario puede moverlo para crear diferentes combinaciones adaptadas a las necesidades de cada momento.

La casa está diseñada para ser llevada en camiones estándar, ya que se divide en dos módulos, lo que reduce los costes de transporte y de energía.

La cubierta que sobrevuela su fachada sur permite que la luz solar entre en la casa en invierno y que se caliente el interior, mientras que en verano ayuda a mantener la casa en sombra y reducir la temperatura. En la cu-bierta se encuentran los paneles fotovoltaicos y térmicos.

Otro sistema innovador es el suelo de madera Termogenik en el exterior. Este sistema consiste en la modificación térmica de la madera, que mejora su durabilidad y estabilidad sin necesidad de tratamientos químicos.

La iluminación de la casa se obtiene gracias a la luz natural, aprovechando las fachadas acristaladas orientadas al sur y el norte. Por la noche, los sistemas artificiales de alta eficiencia de iluminación permiten generar luz con menos energía.

Planta

Sección

nombre del equipo nombre de la universidad

www.ekihouse.org

nombre de la casa país

Universidad del País Vasco(Euskal Herriko Unibertsitatea)ehu team

ekihouse españa

s15parcela

AREA CONSTRUIDA 51 m2

VOLUMEN ACONDICIONADO 169 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 5.856 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 13.740 kWh/Año

CLASE DE FOTOVOLTAICA Vidrio policristalino

POTENCIA PANELES FOTOVOLTAICOS 11,98 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,325 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 0,755 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,263 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,24 W/m2k

COSTE ESTIMADO 234.020 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 219.873 !

Page 35: visitingguide1.pdf

35

Arkan posee los siguientes sistemas:

Arquitectura Vernácula: Arkan maximiza el uso de la ventilación natural y la luz del día. Unas pequeñas ventanas protegidas por lamas horizontales y verticales orientadas al sur, este y oeste minimizan la inclusión de la luz solar directa, mientras que las grandes superficies de vidrio orientadas al norte maximizan los beneficios de la luz natural difusa. El “mashrabiyya”, o pantalla decorativa, que la cubre reduce la ganancia solar

Refrigerador mediante absorción de Energía Solar Térmica: el agua ca-liente generada por el sistema solar térmico a través del colector de tubos de vacío se utiliza para tres sistemas principales en Arkan: calefacción, refrigeración y uso doméstico del agua. Para la calefacción, el agua ca-liente pasa a través de fancoils y el calor se distribuye a lo largo de Arkan. En el caso de la refrigeración se utiliza un enfriador mediante absorción, por lo que el agua caliente se destinará a la sección del generador de la enfriadora.

Mecanismo reversible HVAC: este sistema aprovecha el peso de flotación del aire para ayudar en su proceso de distribución. La red de conductos se divide en dos partes, una se encuentra debajo del suelo y la otra ligada a rejillas que se localizan en la zona superior de la pared. Durante el modo de enfriamiento, el aire es suministrado desde las rejillas de la zona eleva-da de la pared, por lo que el usuario se beneficia de una alta presencia de aire frío. Durante el modo de calefacción, el funcionamiento del sistema de conductos se invierte.

Tratamiento de aguas grises: los sistemas de tratamiento de aguas grises reciclan las aguas residuales domésticas para su uso en el riego, el ino-doro y otras tareas que pueden utilizar agua reciclada. El agua ya usada pasa a través de una serie de filtros, incluyendo un filtro de sedimentos, otro de carbono, y uno último de color, que eliminan las partículas finas, los compuestos químicos y los pigmentos del agua, respectivamente.

Tempcon: los Paneles Tempcon son los elementos principales con los que se construye Arkan. Se componen de una capa de aislamiento inter-calada entre dos capas de acero. Tienen la ventaja de ser rígidos, por lo que son fáciles de manejar y transportar. Además, llevan incorporado el aislamiento y las superficies planas que lo cubren los vuelven atractivos visualmente.

Planta

Sección

nombre del equipo nombre de la universidad

www.slides-s.com

nombre de la casa país

american university in cairoamerican universityin cairo

arkan egipto

s16parcela

AREA CONSTRUIDA 78 m2

VOLUMEN ACONDICIONADO 255 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 14.300 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 6.300 kWh/Año

CLASE DE FOTOVOLTAICA Silicio monocristalino

POTENCIA PANELES FOTOVOLTAICOS 9,6 kW

TRANSMITANCIA TÉRMICA DE FACHADA 1,88 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO --

TRANSMITANCIA TÉRMICA DE SUELO 1,16 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,69 W/m2k

COSTE ESTIMADO 160.200 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 80.100 !

Page 36: visitingguide1.pdf

36

El nombre de ECOLAR comprende las palabras “ecológico” y “solar”, así como “económico” y “modular”. Para traducir estos objetivos principales en un edificio, el equipo ha desarrollado el sistema de construcción ECO-LAR. Contiene todos los elementos necesarios para construir una casa ECOLAR.

La construcción básica es siempre la misma. Se compone de columnas y vigas que se construyen con perfiles tubulares. El material constructivo es la madera y los espacios huecos se llenan con un aislante de cáñamo. La forma de construcción, flexible, permite la ampliación o reducción de la vivienda o parte de ella en cualquier momento. Todas las columnas y las vigas son idénticas, por lo que se pueden producir en serie y con un alto nivel de precisión. Esto también reduce los costes de fabricación.

Las fachadas también son producidas en serie, pero hay varios tipos dis-ponibles. En este caso se decidió utilizar tres tipos diferentes de fachadas, que se han seleccionado y optimizado para las condiciones climáticas de Madrid y su orientación al sol. Los muros norte y sur están diseñados como elementos translúcidos. Las fachadas este y oeste son opacas y constituyen un nuevo desarrollo de energía solar híbrida del sistema. Las ventanas de grandes dimensiones permiten el acceso a los patios.

El techo está cubierto con innovadores paneles solares, dispuestos los opacos en el interior de la vivienda, y los semitransparentes en los pa-tios, permitiendo la iluminación natural de los mismos. Los paneles son multifuncionales, sirven para diferentes propósitos, tales como para agua de apoyo, calefacción pasiva y activa, refrigeración y generación de elec-tricidad.

Dentro de la Casa ECOLAR, el concepto de flexibilidad y modularidad continúa con el gran armario, que va de suelo a techo y donde se inclu-yen dispositivos técnicos, los muebles e incluso el cuarto de baño. Esto permite cambiar la casa y tener diferentes escenarios a lo largo del día.

Un sistema domótico inteligente proporciona el máximo confort al mismo tiempo cumplir con los estándares más altos de energía.

Al utilizar únicamente los materiales de construcción naturales y fuentes de energía renovables, la Casa ECOLAR es muy ecológica y sostenible.

Planta

Sección

nombre del equipo nombre de la universidad

www.ecolar.de

nombre de la casa país

university of applied sciences konstanzecolar

ecolar HOME alemania

s17parcela

AREA CONSTRUIDA 114 m2

VOLUMEN ACONDICIONADO 396 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 14.371 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 5.480 kWh/Año

CLASE DE FOTOVOLTAICA Silicio policristalino

POTENCIA PANELES FOTOVOLTAICOS 13,3 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,05 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 0,5 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,13 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,13 W/m2k

COSTE ESTIMADO 350.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 200.000 !

Page 37: visitingguide1.pdf

37

Astonyshine tiene como objetivo integrar las nuevas tecnologías energé-ticamente eficientes, como los paneles solares, y así generar un nuevo concepto de diseño de arquitectura basado en estas tecnologías. Asimis-mo, propone soluciones innovadoras que aumentan el rendimiento de los sistemas.

Seis son los puntos clave de la estrategia de Astonyshine.

El uso de piedra tallada en la construcción, que, gracias a las nuevas tec-nologías y los nuevos métodos de diseño, muestra un futuro prometedor en la sostenibilidad y la eficiencia energética

El llamativo colector solar, que combina la energía fotovoltaica y térmi-ca, responde a las necesidades energéticas de la casa con una mayor eficiencia y a precios más bajos que los paneles planos fotovoltaicos, proponiendo nuevas ideas para su integración morfológica y tecnológica en la arquitectura. Y es que hay ciertos sistemas fotovoltaicos que utilizan placas solares de alto rendimiento, pero a un coste muy elevado, lo que limita el coste de la instalación. Por otra parte, el proyecto optimiza el uso de materias primas tales como silicio policristalino, reduciendo el peligro de escasez de estos materiales.

Cada panel fotovoltaico cuenta con un sistema electrónico diseñado para generar la máxima energía, lo que permite reconfigurar el sistema, impi-diendo que factores externos dificulten la captación de energía. De esta manera, el sistema, por ejemplo, ajusta los paneles que a ciertas horas tienen sombra, optimizando la generación de energía y disminuyendo las pérdidas de energía en los convertidores.

Se han investigado nuevos diseños, materiales y tecnologías que combi-nen los paneles solares y la estructura del edificio, ayudando así a con-trolar la temperatura, la ventilación, los problemas de prefabricación y la reducción de costes.

El diseño de iluminación de la vivienda se ha ajustado a criterios de fun-cionalidad y sus efectos especiales responden a las necesidades arqui-tectónicas del proyecto.

De igual manera la integración del diseño arquitectónico y estructural con la logística del proyecto consiguen reducir el coste total del producto y aumentar su calidad y la sostenibilidad.

Planta

Sección

nombre del equipo nombre de la universidad

www.astonyshine.com

nombre de la casa país

Ecole nationale supérieure d’architecture Paris-MalaquaisUniversità di FerraraEcole des Ponts ParisTechPolitecnico di Bari

astonyshine

astonyshine francia-italia

s18parcela

AREA CONSTRUIDA 96,7 m2

VOLUMEN ACONDICIONADO 306 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 15.000 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 6.100 kWh/Año

CLASE DE FOTOVOLTAICA Silicio monocristalino

POTENCIA PANELES FOTOVOLTAICOS 11,35 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,11 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 0,625 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,126 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,125 W/m2k

COSTE ESTIMADO 290.000 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 100.000 !

Page 38: visitingguide1.pdf

38

Las características principales de FOLD (Pliegue) tienen un rasgo en co-mún: ser eficientes energéticamente, y ser habitables a un nuevo nivel. Es-tos conceptos son clave para crear la casa sostenible del mañana, ¡hoy! Están integrados en la narrativa arquitectónica, estructural y en la fuerza del pliegue, lo que hace que se conviertan en factores determinantes. FOLD no sería FOLD sin estas características.

Las células solares de RAcell conforman un sistema único desarrollado exclusivamente para FOLD. Las elegantes y finas células solares cubren un sistema de agua caliente colocado debajo de las mismas. Este sistema PVT contribuye generando electricidad así como agua caliente. ¿Y el es-pesor? Tan sólo en 86 mm.

El diseño de paredes y techo es fundamental para el concepto arquitec-tónico del pliegue y se genera de una manera liviana. Esto es posible gracias a una combinación especial de una madera muy resistente finlan-desa, Kerto, y de la lana de roca Aerowolle. El cerramiento se construye con un panel sándwich de madera Kerto a ambos lados y lana de roca pegada a la madera, dejando una cámara de aire en el interior. Esta cons-trucción evita puentes térmicos, minimizando así el espesor de la estruc-tura y creando los pliegues de una manera sutil.

La columna estructural del pliegue es lo que llamamos el “metamueble”: el núcleo técnico. El núcleo técnico también se construye a partir de madera Kerto y es el único centro de apoyo dentro de la casa. El núcleo técnico está equipado con todas las características esenciales de la casa: cuarto de baño, aseo, cocina y cuarto técnico. Es el “cerebro de la casa” y está diseñado para su producción estandarizada, lo que permite su prefabrica-ción y tener un precio asequible.

El sistema de calefacción y refrigeración de la casa también es una solu-ción única desarrollada específicamente para FOLD. Tanto el suelo como el techo cuentan con una instalación de paneles para climatizar el interior. En invierno, este sistema, hace circular agua caliente por el suelo y agua fría por el techo en verano gracias a un sistema de control y a una unidad Nilan, un conversor de calor de alto rendimiento, que, con el apoyo de los paneles solares, acciona el sistema de refrigeración.

Planta

Sección

nombre del equipo nombre de la universidad

www.solardecathlon.dk

nombre de la casa país

Technical Universityof Dinamarcateam dtu

fold dinamarca

s19parcela

AREA CONSTRUIDA 105,31 m2

VOLUMEN ACONDICIONADO 191 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 11.391 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 6.076 kWh/Año

CLASE DE FOTOVOLTAICA Silicio microcristalino

POTENCIA PANELES FOTOVOLTAICOS 9,2 kW

TRANSMITANCIA TÉRMICA DE FACHADA 0,095 W/m2k

TRANSMITANCIA TÉRMICA DE ACRISTALAMIENTO 1,04 W/m2k

TRANSMITANCIA TÉRMICA DE SUELO 0,096 W/m2k

TRANSMITANCIA TÉRMICA DE CUBIERTA 0,096 W/m2k

COSTE ESTIMADO 319.225 !

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 212.000 !

Page 39: visitingguide1.pdf

39

CASAS DECOLABORADORES

sde10 universidadpolitécnicade madrid

ediFicioechor cemexholmiclafargeportland valderribas

garnica

modulabgarnica plywood

fabriq-21

q-21hsm

eykos

saint-gobainwanner

c01

c02 c03 c04 c05

Page 40: visitingguide1.pdf

40

El objetivo del proyecto es desarrollar un nuevo sistema industrializado mediante una construcción ligera y sostenible especialmente centrado en sus efectos sobre el ahorro de energía y las emisiones de gases de efecto invernadero. Para conseguirlo se han adoptado soluciones técnicas innovadoras que tienen en cuenta algunos principios como que se trate de un sistema in-dustrializado y versátil, de alta calidad, que posibilite una construcción eficiente, que se acomode a cada cliente, que mejore las condiciones de sostenibilidad y arquitectura bioclimática, o que aproveche al máximo la energía solar térmica y fotovoltaica, entre otros.El edificio SDE 10 es un prototipo de una unidad básica. En realidad, su diseño está pensado para agruparse formando bloques de vivienda, ya que así es mucho más sostenible que individualmente.Su orientación está elegida para optimizar las posibilidades de su ubica-ción. Las zonas en las que sus habitantes pasan más tiempo se distri-buyen en el lado sur. En la parte norte se encuentra la sala de máquinas y la entrada, formando un área de amortiguamiento térmico. La sala de máquinas se conecta directamente con el baño y la cocina a través del techo. Las cocinas se localizan al oeste y al esteAdemás de la eficiencia energética de los materiales empleados en su construcción, con el objetivo de acercarse a una arquitectura sostenible, el SDE10 incorpora el uso de materiales naturales como la madera y el corcho, que sirven como estructura, aislamiento y acabado. El uso de estos materiales en los acabados interiores genera espacios cálidos y acogedores para el usuario. Los elementos naturales se integran en la arquitectura, en espacios como la fachada o la cubierta del edificio. Además de cumplir diversas funcio-nes, están bien adaptados al clima seco de Madrid, ya que proporcionan humedad al ambiente.El sistema de construcción está formado por elementos en 3D y 2D, con el objetivo de reducir las costes de transporte, impidiendo el traslado de módulos vacíos. Como consecuencia de esta decisión, la sala de máqui-nas, el cuarto de baño y la cocina se encuentran en módulos 3D y sala de estar, en módulos 2D.Esta casa ya se exhibió en el Solar Decathlon 2010 y fue una experien-cia muy positiva. El tiempo de montaje duró 6 horas, y los acabados, el mobiliario y la iluminación se terminaron por completo en 2 días. La prefa-bricación se llevó a cabo en 3 meses y para el transporte no hubo ningún problema porque las dimensiones de los diversos componentes están di-señadas de manera que no es necesario el uso de transporte especial y así evitar los mayores costes del mismo.

nombre de la casa nombre de la univesidad

http://2010.sdeurope.org

universidad politécnicade madridsde10

AREA CONSTRUIDA 117,20 m2

VOLUMEN ACONDICIONADO 262.6 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 12.560 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 12.173 kWh/Año

CLASE DE FOTOVOLTAICA Teluro de cadmio

POTENCIA PANELES FOTOVOLTAICOS 9,1 kW

TRASMITANCIA TÉRMICA DE FACHADA 0,38 W/m2k

TRASMITANCIA TÉRMICA DE CUBIERTA 0,30 W/m2k

TRASMITANCIA TÉRMICA DE SUELO 0,30 W/m2k

COSTE ESTIMADO DE INDUSTRIALIZACIÓN 250.000 !

Módulo 3D Piezas 2D Piezas 2D Piezas 2D

Montaje forjados Montaje cerramientosopacos y translúcidos

Cerramiento opaco Cerramiento de vidrio Forjado

c01parcela

Page 41: visitingguide1.pdf

41

La actividad de la edificación, hasta ahora, se ha desarrollado inconsciente de su impacto ambiental, del consumo de recursos y de las emisiones de residuos que produce. Sin embargo, es la toma de conciencia sobre dicho problema ambiental lo que nos lleva necesariamente a formular nuevos modelos y técni-cas de construcción sostenible.

Fruto de la colaboración entre Q-21 arquitectura y HSM, Home sistemas mo-dulares, nace el concepto FabriQ-21, una nueva forma de construir, modular, sostenible e industrializada. Viviendas flexibles y ligeras, montables y desmon-tables, que se transportan, se modifican y se amplían fácilmente cuyo las ne-cesidades cambian.

El prototipo FABRIQ-21 es una vivienda mínima, de 32 m2, germen de toda una serie de viviendas que, realizando ampliaciones y pequeñas variaciones, en la distribución, las alturas y los materiales empleados, permiten fácilmente personalizar el resultado.

FABRIQ-21 genera proyectos modulares, sostenibles e industrializados, que se basan en:Ecología - El cierre de ciclo de los materiales.Diseño bioclimático - Diseño de acuerdo al entorno. Eficiencia energética - La calificación energética de un edificio.

NOMBRE DE LA CASA empresa

www.fabriq-21.es

q-21hsm

Fabriq-21

El edificio ECHOR desarrolla un módulo de vivienda tipo que, agrupada, puede conformar un conjunto edificatorio de viviendas en bloque.

El edificio ECHOR se proyecta como un sencillo contenedor prismático, de apro-ximadamente 10x10, en el que uno de sus lados se fractura formando una “U” que resuelve el acceso.

Así, el resultado de la distribución de los citados espacios en una sola planta da lugar a un edificio prismático con dos “cajas” diferenciadas: la mayor, en la que se desarrolla el espacio de exposición y los dos despachos y la menor, dislocada con respecto a la primera, en la que se resuelve el acceso al edificio.

Cada una de las dos cajas que componen la fachada del edificio se resuelve mediante paneles prefabricados de hormigón. Dichos paneles se apoyan en la cimentación, también a base de elementos prefabricados de hormigón, y se re-mata con forjado de planta baja de losas armadas de hormigón visto y forjado de cubierta a base de placas alveolares de hormigón.

El proyecto resulta así sencillo económica y visualmente hablando, poniendo en valor el acabado en hormigón visto de dos colores, gris perla para la caja mayor y rojo para la U-caja menor. De esta manera se muestra la versatilidad de acaba-dos del material en sí mismo, uno de los objetivos de esta solución constructiva.

La denominación ECHOR, eficiencia constructiva sostenible en hormigón, trata de aunar estos conceptos en un mismo desarrollo:

-migón en las edificaciones permite una mayor estabilidad térmica, ya que suaviza las variaciones de la temperatura interna.

en el cual las estructuras, los forjados, los muros exteriores y las particiones entre viviendas sean de hormigón, disponga de una inercia térmica tal que reduzca el consumo energético.

El hormigón protege del fuego y las condiciones meteorológicas extremas.

su vida útil.

NOMBRE DE LA CASA empresa

www.echormigon.es

cemexholmiclafargePortland valderribas

ediFicioechor

c02 c03parcela parcela

AREA CONSTRUIDA 32,24 m2

VOLUMEN ACONDICIONADO 8,10 m3

PRODUCCIÓN ENERGÉTICA ESTIMADA 332,5 kWh/Año

CONSUMO ENERGÉTICO ESTIMADO 950 kWh/Año

POTENCIA INSTALACIÓN FOTOVOLTAICA 280 W

PANELES FOTOVOLTAICOS Silicio policristalino de alto rendimiento

TRANSMITANCIA TÉRMICA DE FACHADA 0,22 W/m2k

TRANSMITACIA TÉRMICA DE CUBIERTA 0,33 W/m2k

TRANSMITACIA TÉRMICA DE SUELOS 0,26 W/m2k

TRASMITANCIA TÉRMICA DE VIDRIOS 1,1-1,3 W/m2k

COSTE ESTIMADO DE VIVIENDA PROTOTIPO (32m2) 1.600 !/m2

COSTE ESTIMADO DE VIVIENDA 6 MÓDULOS (96m2) 1.100 !/m2

Page 42: visitingguide1.pdf

42

Garnica by Modulab es un proyecto conjunto del estudio de arquitectura Modulab y de Garnica Plywood, productor de paneles de madera contra-chapada: una construcción confortable, industrializada, sostenible, eficiente energéticamente y de precio asequible, basada en un sistema constructivo con aplicaciones diversas -vivienda, hostelería, comunidades, oficinas…

La solución constructiva sitúa la sostenibilidad como marco que confiere el sentido a las estrategias de diseño y producción. Presentamos una solución para vivienda de fin de semana, un espacio de vida cómodo, con el mínimo impacto de edificación y las máximas prestaciones.

La arquitectura del proyecto parte de un sistema de montaje en kit, que crea una matriz de módulos de 1,5m x 1,5m, para permitir multitud de combina-ciones. La estructura se resuelve mediante los paneles sándwich estructu-rales -con alma de poliestireno extruido y tablero contrachapado de madera de chopo estructurales- y un sistema de vigas de madera microlaminada, que soportan una cubierta plana. El fuerte aislamiento de 10cm de poliesti-reno de los paneles en envolventes y cubierta, la cámara de aire trasventi-lada y las carpinterías de madera con vidrios aislantes 4/12/6, confieren al conjunto un excelente comportamiento térmico. Por este motivo, el ahorro energético global es de un 8,16% más que la referencia para un edificio de estas características.

En Saint-Gobain hemos creado un innovador sistema de construcción ba-sado en la modulación, prefabricación e industrialización que tiene las ven-tajas de ser de mayor calidad que los sistemas tradicionales, más rentable y con un impacto medioambiental menor. Todas estas circunstancias han permitido a AYKOS by SG WANNER mejorar su tecnología y crear econo-mías de escala que aseguran unos altos estándares de calidad constructiva y un precio competitivo. AYKOS by SG WANNER tiene el objetivo de hacer las cosas de una manera diferente y de conseguir más por menos. Esta diferencia se basa en los siguientes cuatro pilares fundamentales: calidad, innovación, rapidez y sostenibilidad.

*(36m2 vivienda + 9 m2 porche que contabiliza al 50%)

www.sistemamodulab.es www.aykos.comwww.garnicaplywood.com

NOMBRE DE LA CASA NOMBRE DE LA CASAempresa empresa

modulabgarnicaplywood

saintgobainwAnner

garnica eykos

c04 c05parcela parcela

AREA CONSTRUIDA 40,5 m2 *

VOLUMEN ACONDICIONADO 96 m3

CONSUMO ENERGÉTICO ESTIMADO 5.302 kWh/Año

COSTE DE INDUSTRALIZACIÓN ESTIMADO 30.000 !

CLASE DE FOTOVOLTAICA Silicio policristalino de alto rendimiento

TRASMITANCIA TÉRMICA DE FACHADA, CUBIERTA Y SUELO 0,33 W/m2k

TRANSMITACIA TÉRMICA DE CARPINTERÍAS 1,3 W/m2k

TRASMITANCIA TÉRMICA DE VIDRIOS 2,9 W/m2k

Page 43: visitingguide1.pdf

Black&White de la UPMen la edición SD 2009

Page 44: visitingguide1.pdf

44

SOLARDECATHLONEUROPE

W W W . S D E U R O P E . O R G

/sdeurope @sdeurope

El contenido de este folleto solo compromete a su autor y no refleja necesariamente la opinión de la Unión Europea. Ni la EACI ni la Comisión Europea son responsables de la utilización que se podrá dar a la información que figura en la misma.

ORGANIZADORES

PATROCINADORES

COLABORADORES

MEDIOS COLABORADORES

COLABORADORES VILLA SOLAR

CASAS EN EXPOSICIÓN

COLABORADORES CASA SDE10 UPM

R

Asociación Nacional de Empresas de Rehabilitación y Reforma

CENTRO DE AUTOMÁTICA Y ROBÓTICA

CSICCONSEJO SUPERIOR DE INVESTIGACIONES CIENTÍFICAS

INSTITUTO DE CIENCIAS AGRARIAS (ICA)

GRUPO CEMENTOS PORTLAND VALDERRIVAS

CSICCONSEJO SUPERIOR DE INVESTIGACIONES CIENTÍFICAS

INSTITUTO DE CIENCIAS AGRARIAS (ICA)

Page 45: visitingguide1.pdf

1

INTERNATIONALCOMPETITIONFOR SOLAR HOUSES

DOWNLOAD HERE THE DIGITAL VERSION

SOLARDECATHLONEUROPE

14-3OESCENARIO PUERTA DEL ÁNGEL | CASA DE CAMPOSEPTEMBER 2O12 MADRID

Page 46: visitingguide1.pdf

UPM’s solar houseat 2007 SD edition

Page 47: visitingguide1.pdf

3

SOLAR DECATHLON EUROPE

SDE2012, A INITIATIVE COMMITEDTO A SUSTAINABLE ARCHITECTURE ..........................................4

SMART GRID:THE CORE OF THE VILLA SOLAR ...................................................7

THE DECATHLON ....................................................................................8

SOLAR DECATHLON EUROPE:BEYOND COMPETITION .....................................................................10

1OACTION:EUROPE SUSTAINABILITY AWARENESS ..................................11

SOLAR EXPERIENCES ........................................................................12

ACTIVITIES ...............................................................................................14

PARTICIPANT TEAMS ......................................................................... 17

COLLABORATORS HOUSES ...........................................................39

CONTENTS

Edited by: Solar Decathlon Europe 2012PROJECT MANAGER SOLAR DECATHLON EUROPE 2012: SERGIO VEGACOORDINATION OF VISITING GUIDE: SÁLVORA FELIZEditor: Fernando UríasTexts by: Rodrigo GonzálezTranslation: Victoria SmithIllustrations: Tomás PinedaArt direction: Carlos Ramos

Page 48: visitingguide1.pdf

4

SDE2012,A INITIATIVE COMMITTED TO SUSTAINABLE ARCHITECTURE

Building a house powered by solar energy alo-ne is now a real option available to everyone, as demonstrated by the houses built by universities taking part in the second edition of the Solar Decathlon Europe (SDE) 2012. This competition between solar houses arose with the aim of pro-moting sustainable development in architecture through research and innovation, and raising public awareness about the importance of protec-ting the environment and fostering sustainability in construction work.

From the 14th to 30th September, 19 teams from 12 coun-tries (Germany, Brazil, China, Denmark, Egypt, Spain, Fran-ce, Hungary, Italy, Japan, Portugal and Romania), will build 19 energy efficient houses in the Villa Solar, at the Puerta del An-gel site within Madrid’s Casa de Campo, which will mark the culmination of a project begun in their respective academic centres in 2011. For 15 days, each house will have to under-go 10 contests with scoring. The one which consumes the least natural resources and produces the minimum waste in its lifetime will be the winner of the competition.

This second edition of Solar Decathlon Europe is organized by the Ministry of Public Works, Madrid’s City Council and the Polytechnic University of Madrid, through its Higher Te-chnical School of Architecture, and its principal sponsors are Schneider Electric and Kömmerling.

The Villa Solar will be open free-of-charge until the 30th Sep-tember. Members of the public will be able to visit the 19 competition houses on the inside and see all the technologi-cal and design details by taking the explanatory guided tour provided in each of them. This is without any doubt a unique opportunity to acquire first-hand knowledge of innovations in the field of sustainable construction and discover for yourself that living in a solar house is not just a utopian idea

OBJECTIVES

Organizing Solar Decathlon Europe has a threefold pur-pose: zining, scientific and disseminative. Thus, while the decathletes learn to work in multi-disciplinary teams, facing the challenges posed by the future and working out innova-tive solutions, members of the public visiting the Villa Solar can witness and become aware of the real possibilities of combining a reduction in environmental impact with main-taining comfort and quality of design in their homes. In the same way, professionals have access to techniques and procedures which they can study and apply.

For their part, the volunteers – indispensable to the staging and success of Solar Decathlon Europe, have a chance to share their experiences with the rest of the participating team-members and to mature professionally, thanks to their work during the competition.

Finally, the universities, businesses and public institutions have access to a new means of collaboration, such as trying out scientific projects in real conditions, which can later turn into market solutions or be used to improve and make creative applications to existing products.

A GLOBAL INITIATIVE

Solar Decathlon Europe take its origins from the American edition of the competition. The Department of Energy of the North American government created the US DOE Solar De-cathlon competition in 1999, and its first edition was held on the National Mall in Washington DC in 2002.

Participation by the Polytechnic University of Madrid in the 2005 and 2007 American editions, made the competition known in Spain and led to the agreement between the go-vernments of both countries on the launching of the first edition outside the USA. This agreement not only confirms our country’s commitment to the use of sustainable energy, but also the necessary involvement of our country’s institu-tions and its citizens in protecting and caring for our planet. These are all issues where government initiatives for raising awareness and educating - which is where Solar Decathlon Europe fits - play a role both essential and indispensable.

In this way, the first edition of Solar Decathlon Europe was held, with great success, in 2010, also in Madrid, with over 200,000 people visiting the sustainable houses of the partici-pating teams. The current edition is, thus, the second to be held in Madrid.

Page 49: visitingguide1.pdf

5

Winner house LUMENHAUSin 2010 Solar Decathlon Europe’s edition

Page 50: visitingguide1.pdf

6

Apart from the construction of 19 sustainable houses, Solar Decathlon Europe 2012 offers a variety of activities all rela-ted to sustainable energy, including a program specially de-signed and aimed at children. In an entertaining and amusing way, little ones will begin to become aware of the importance of looking after the environment and the advantages of a hou-se powered by solar energy alone.

One of the main novelties of this edition is the chance to see an intelligent network or smart grid in action, thanks to which energy will be shared by all the houses at the Villa Solar, allowing the excess energy produced by these to be supplied to the whole Villa Solar. To give an example: the EV charging station (electric recharging point for electric vehi-cles), located on site, will receive part of the surplus power from the houses. In the 2010 edition of SDE, participating houses produced three times as much energy as they con-sumed. Overall, they generated 6,177 kWh, while they con-sumed 2,579 kWh. The surplus energy was fed into the ne-twork for the benefit of people in the neighbourhood.

There is an ever-growing number of countries becoming aware of the fact that the future lies in using natural resour-ces and sustainable energies. Spain was the first country to host the Solar Decathlon competition outside the United States, but the North American country has now concluded agreements with China, which will host the 2013 edition, and with France, which will become the headquarters of the next European edition in 2014.

For 15 days, nearly five hundred university students from 12 nations will erect the 19 sustainable housing projects. Totally innovative and perfectly habitable constructions which – we hope –will be our houses in the not so distant future.

Tongji TeamCHINA

PrispaROMANIA

Rhône AlpesFRANCE

OdoooprojectHUNGARY

CEU Team ValenciaSPAIN

(e)co TeamSPAIN

cem+nem-PORTUGAL

Andalucía TeamSPAIN

RWTH Aachen UniversityGERMANY

American University in CairoEGYPT

Aquitaine Bordeaux CampusFRANCE

EHU TeamSPAIN

Med in ItaliaITALY

Virtual modelsof contestant houses

in 2012 Solar DecathlonEurope edition

Chiba UniversityJAPAN

Grupo _UnizarSPAIN

Team BrasilBRAZIL

EcolarGERMANY

AstonyshineFRANCE/ITALY

Team DTUDENMARK

Page 51: visitingguide1.pdf

7

THE COREOF THE VILLA SOLARSolar Decathlon’s Micro Smart Grid will connect and control the whole electrical system from this micro grid, which will connect the 19 houses in the Villa Solar, as well as organizational buildings, stands, marquees, ser-vices and even the electric recharging points for electric vehicles at the Villa Solar. The network, designed by Schneider Electric, could manage some 180,000 kWh in a year and effect a saving equivalent to 180 tons of CO2.

Efficient management of the power generated by the 19 solar houses taking part in Solar Decathlon Europe (SDE) 2012 is one of the basic features of the Villa Solar. For this reason, for the duration of the competition, the entire Villa Solar will be connected to the same micro smart grid, who-se structure has been designed by Schneider Electric, who also sponsor SDE.

A smart grid is an electricity distribution network, which allows multi-directional connection between consumers and generators and between the consumers themselves. The use of intelligent networks, like the one designed for this edition of Solar Decathlon Europe, allow optimization of the system’s efficiency by balancing flow in real time and adapting power supply to demand. Furthermore, the proxi-mity of energy production to its consumption will permit reduction of losses through transportation, thus optimizing

the benefits of renewable energies.

All the elements of the Micro Smart Grid will be centrally connected via Schneider Electric’s Scada technology. At any given moment, it will be possible to see power genera-ted and consumed at various points on the network, control flow, store any excess for future peaks in demand and ma-nage the system by remote control if necessary. Moreover, and for the first time, any surplus energy can be fed into the city’s power network, enabling the city’s citizens to benefit from power generated by participating houses.

The Micro Smart Grid will also be equipped with a very intuitive interface, which will allow visitors to see and un-derstand real time energy performance in the Villa.

> Houses generate photovoltaic energy during the day, and consume it from the grid at night. The energy balance is positive: they consume less than generate

City

HV/MVSubstation

MV/LVSubstation

LV Panels

Wind mill

Electric VehicleChargers

Battery Bank

Photovoltaicpergola

Services

20 houses in competition

Smart CityCenter

> The design of houses follows criterias of Energy Efficiency. So it’s important not only to generate green power, also to reduce the energy consumption

> MV/LV Substation are monitored and remoted controlled from the Smart City Center building

> Energy from wind mills can be generated 24 h/day supplying energy to the grid when photovoltaic panels don’t produce energy

> Energy excess could go out from Villa Solar to be consumed in other places

> EV Chargers allow to plug electric vehicles in a safe way. Electric vehicles use to be charged at night, just when there is an excess of energy coming from mills

> Photovoltaic energy is clean, reliable and has become ever cheaper

> Energy excess generated during the competition is mainly consumed by the services > The Smart City Center supervises the

energy consumption and generation of all the elements at Villa Solar

RFID technology

Scame plugtype 3

LV Panel withmonitoring

ModBuscommunication

Monitoringsoftware

50/60 Hz panel to connect houses working at 60 Hz

Offices

DC Protection

Inverter

LV panel with monitoring

ModBus communication

Photovoltaic energy generation by meanspanels

> Batteries can store energy excess and supply it to the grid when needed

Conferences Tent

Restaurant

Solar Decathlon Europe 2012 Smart Grid at Villa Solar

Page 52: visitingguide1.pdf

8

In January 2011, the Organization of Solar Decathlon Europe (SDE) selected the teams which would form part of this com-petition from among the proposals received. That moment, in accordance with SDE rules, marked the beginning of the process of designing the houses with which each team is currently competing.

SDE rules set out a schedule for submission of documenta-tion by participating teams, so that the SDE Organization can follow up on development of the projects and check that they are in line with the designated parameters.

At the beginning of September 2012, each team starts on assembly of their houses in Madrid’s Casa de Campo, which will be open to the public between 14th and 30th of the same month. Over this period, the ten contests of the competition will be evaluated. This evaluation is carried out on the basis of three systems, as follows: degree of task completion, me-asurements in situ and by jurors’ criteria. The team with most points at the end of competition will be declared the winner.

Points for Task Completion: Teams gain points for successfu-lly completing a given task or getting as close to completing it as possible.

Points for Measurements in situ: The houses are monitored constantly during the competition, with additional spot mea-surements of extra parameters. Points are awarded depen-ding on how close measurements approximate the objectives established for a given contest.

Points awarded by Jurors: Juries of specialists in each area will award points according to the evaluation criteria and gui-delines laid down by the Solar Decathlon Organization.

THEDECATHLON

Images taken fromthe 2010 edition

Page 53: visitingguide1.pdf

9

ARCHITECTURE Contest by jury | 120 points

An attractive design is sought, which combines comfortable and functional spaces with bioclimatic technologies and strategies for reducing the house’s energy consumption. A jury of architects vi-sits each of the houses, looking for a coherent and comprehensive project.

ENGINEERING AND CONSTRUCTION Contest by jury | 80 points

This contest evaluates systems used by participating teams in building their houses, bearing in mind design, project commissio-ning and appropriateness of choice. A jury of experts analyzes elements ranging from the structure of the building to its solar systems, on the basis of technical documentation and visiting the house.

ENERGY EFFICIENCY Contest by jury | 100 points

The cleanest energy is that which is not consumed. For this rea-son, the competition places special emphasis on teams covering house-dwellers’ needs using minimum possible resources. The jury evaluates concepts such as the building’s thermal envelope, active and passive systems (such as sunlight, ventilation, etc.) of thermal conditioning, efficiency of electrical appliances, control systems, automation, etc.

ELECTRICAL ENERGY BALANCE Measurement | 120 points

This contest evaluates the houses’ capacity for electrical self-su-fficiency over a whole year. Houses should reduce consumption to a minimum and produce electricity in quantities equal or greater than their consumption. The contest is divided into three sections which examine the electrical self-sufficiency of the house, the time correlation between generation and consumption, and consump-tion per unit of area. Evaluation is made on the basis of the results obtained from bi-directional electricity meters installed by the Or-ganization in each of the houses.

COMFORT CONDITIONS Measurement-task completion | 120 points

This contest evaluates each house’s capacity to maintain environ-mental conditions (temperature, humidity, acoustics, air quality and illumination) suitable for the comfort of its inhabitants. Eva-luation is made on the basis of results obtained from sensors ins-talled by the Organization in each of the houses and also from an acoustics trial.

FUNCTIONING OF THE HOUSE Measurement-task completion | 120 points

Checks are made on the possibility of performing normal everyday tasks, such as using electrical appliances and elec-tronic equipment, producing hot water or simply inviting stu-dents from other participating teams to dinner.

COMMUNICATION AND RAISING SOCIAL AWARENESS Contest by jury | 80 points

This contest assesses teams’ ability to transmit to the public the basic concepts behind the SDE competition, as well as ideas contributed by their completed house along these lines, both during the period of prior design and during public visits to the Villa Solar. A jury of experts studies the Communication Plan designed by each team over the two years of the house’s deve-lopment and takes the same house tour as that on offer to the public, assessing it according to its effectiveness, efficiency and creativity.

INDUSTRIALIZATION AND MARKET VIABILITY Contest by jury | 80 points

This contest assesses if the house designed for competition by each team can be successfully transferred onto the property mar-ket. The jury of experts will take into account factors such as com-mercial appeal of the product, price of production, possibilities for prefabricating parts of the building and the design’s capacity for being adapted to other models of housing.

INNOVATION Contest by jury | 80 points

Points are gained by teams who have made innovative solutions in various fields, ranging from architectural ideas to development of new materials and systems. Jurors from other contests make separate evaluations of innovative features each in their own area. The sum of these scores makes up the final score each team gains in this contest.

SUSTAINABILITY Contest by jury | 100 points

This contest considers the environmental impact of the house in its “lifetime” - that is - from extraction and transformation of its materials, building procedures and use, to its demolition and re-cycling. Consideration is given to use of natural resources, possibilities for re-use and recycling, as well as to reduction in waste generation.

THE TEN CONTESTS

Page 54: visitingguide1.pdf

10

Solar Decathlon Europe [SDE] is much more than a universi-ty competition. It is also a powerful – and effective – platform for raising awareness about the advantages of using renewable energies. In order to achieve this objective, the SDE Organization has de-signed a Villa Solar around the following four concepts: energy saving, energy efficiency in buildings and cities, electrical energy efficiency, sustainability.

Each of these concepts, presented by one or several institutions, “comes alive” in the various spaces allocated thematically throu-ghout the Villa Solar, allowing visitors to visualize them through information panels, photos, audiovisual materials and objects.

ENERGY SAVINGThe Institute for Diversification and Saving of Energy (IDAE), located in the Insititutional Dome, has designed a markedly in-formative space aimed at raising awareness about the need to save on energy consumption and how to achieve this. Among other exhibits, this space puts special emphasis on measures included in the 20/20/20 target being set by the European Union within the framework of its policy on climate change and the diverse range of energy certification designed to reduce our energy consumption.

ENERGY EFFICIENCY IN BUILDINGS AND CITIESThe Polytechnic University of Madrid (UPM), also situated in the Institutional Dome, is responsible for giving expert and pro-fessional information about the full range of key issues which, like sustainable town planning, bioclimatic architecture, pas-sive systems, efficient installations or energy refurbishment, contribute to achieving energy efficiency at many levels.

ELECTRICAL ENERGY EFFICIENCYSolar Decathlon Europe itself manages this thematic spa-ce, housed in UPM’s prototype from SDE10, and aimed at showing the general public how energy production and de-mand are managed in the Villa Solar. Essentially, visitors to the Cork House should be able to “visualize” how the Smart Grid (Intelligent Network) works, enabling the Villa Solar to make intelligent and efficient use of its energy consumption.Apart from the Smart Grid, visitors to this thematic space will be able to observe the different types of renewable energies in more detail and see how they work through practical exam-ples. Finally, another thematic space will introduce them to the concept of “sustainable mobility” via the workings of electric vehicles and the impact of their widespread use on electricity networks of the future.

SUSTAINABILITYThe last of the major concepts which make up the Villa Solar is de-dicated to Sustainability in its widest sense. This thematic space, managed jointly by the Polytechnic University of Madrid and the Ministry of Public Works, and situated in the Institutional Dome, shows what sustainable development is about and the need for all of us to be sustainable in a wide range of everyday situations.

SOLAR DECATHLON EUROPE:BEYONDCOMPETITION

Page 55: visitingguide1.pdf

11

1OACTION:EUROPE’S SUSTAINABILITY AWARENESIs it possible to make houses self-sufficient? How does a solar house work? What materials are more efficient for building a house? Answers to these and other questions can be found in the 10ACTION Euro-pean Project, through the numerous activities that have been organized in ten European countries (Spain, France, the United Kingdom, Portugal, Holland, Belgium, Italy, Austria, Sweden and Denmark).

10ACTION was conceived in 2010 within the framework of the Intelligent Energy Europe Program and is led by the Polytechnic University of Madrid. Its main objective is to raise social awareness about the responsible use of renewable energies in building work.

Up until now, results obtained have been excellent, thanks to 10ACTION’s tailoring each activity to a specific public, reaching children, young people, students, professionals from the construction sector and the general public. Ove-rall, 180,000 persons have taken part in these activities. Moreover, they have reached one and a half million Euro-pean citizens through the media.

In Spain, 10 ACTION is now organizing a large number of activities to take place from 14th to 30th September at Solar

Decathlon Europe 2012 (SDE)’s Villa Solar, creating a uni-que and versatile space dedicated to sustainable energies.

From the outset, 10 ACTION has been linked to SDE, seeing that the European Project was initiated as a means of disseminating knowledge acquired in Solar Decathlon Europe 2010.

With this purpose in mind, 10Action created the “Solar Decathlon Europe 2010 Towards Energy Efficient Buil-dings” digital book and held the “Nearly Zero Energy Buil-dings. New Construction and Rehabilitation” conference for professionals, among many other activities.

10ACTION, co-funded by the IEE Program, is backing a more sustainable world made by children and adults

Workshop organizedby 10Action

Page 56: visitingguide1.pdf

1212

grupo !_unizar • casa !_unizar • spain

chiba university • omotenasi house • japan

aquitaine bordeaux campus • sumbiosi • france

cem+nem- • cem’ casas em movimento • portugal

tongji team • para eco-house • china

andalucia team • patio 2.12 • spain

team Ecolar • ecolar home • germany

team brasil • ekó house • brazil

astonyshine • astonyshine • france-italy

SOLAREXPERIENCESWe have designed this double page for you to note down your impressions of each of the houses taking part in SDE 2012

Page 57: visitingguide1.pdf

1313

ceu team valencia • smlsystem • spain

ehu team • ekihouse • spain

aachen university • counter entropy house • germany

american university in cairo • arkan • egypt

rhône alpes • canopea • france

(e)co team • (e)co • spain

team dtu • fold • denmark

odooproject • odoo • hungary

med in italy • med in italy • italy

SOLARDECATHLONEUROPE

Page 58: visitingguide1.pdf

1414

ACTIVITIES

GENERAL PROGRAMME

GO1 GUIDED TOURS OF THE VILLA

These are visits of a general nature, explaining the SDE competition and the Villa Solar, while strolling around the houses on the outside. Duration approxi-mately 60 min.TIMETABLE: Fri 16:00-22:00 hrs and Sat-Sun 10:00-22:00 hrs.

GO2 VISITS TO THE HOUSES OF SDE COLLABORATORS (OUTSIDE THE COMPETITION)

The public will receive explanations of the most outstanding technologies or building systems in houses not taking part in the competition: ecHor house (of IECA), FabriQ21, MODULAB, Saint Gobain Wanner and House of SDE 2010 UPM (Smart City Center).TIMETABLE: Mon-Thur 10:00-20:00 hrs, Fri-Sun 10:00-22:00 hrs.

GO3 SOLAR KITCHENS

Installation of 2 kitchens and a solar oven with demonstrations, ranging from making coffee and boiling water for infusions to making cakes and paellas.TIMETABLE: 17:00-20:00 hrs., Sat-Sun 11:00-14:00 hrs. and 17:00-20:00 hrs.

GO4 VILLA SOLAR PHOTOGRAPHY MARATHON

Photo competition for everyone on scenes from the Villa Solar. The photos will be uploaded onto Facebook. There will be daily prizes and a grand prize at the end of Solar Decathlon Europe.

TIMETABLE: Mon-Thur 10:00-20:00 hrs and Fri-Sun 10:00-22:00 hrs.GO5 MICRO-SORT FILM CONTEST

Which everyday object do you hate because you think it’s unnecessary and harmful to our planet? Which do you admire for the common sense and honesty of its design? Upload your short film into the network and win: a new 32GB iPad, 20 T-shirts exclusively designed by Loreak Mendian, 40 film tickets and above all… Your short film will become part of the collective film “I like/I don’t like”, based on everyday objects.TIMETABLE: L-D 10:00-22:00 h.

GO6 10ACTION EXHIBITIONS -IEE

Exhibition of activities organized by the 10ACTION project for 180,000 people in 10 European countries. These include work by children, young people and students who have taken part in 10 ACTION activities. The winners and best national and international entries from the “Draw the sun’s energy” contest, the “Focus on Ener-gy” photographic competition, the “Ideas for the Future” drawing competition and the “More with less” architecture and urban planning contest. TIMETABLE: Mon-Thur 10:00-20:00 hrs and Fri-Sun 10:00-22:00 hrs.

GO7 PASSIVE HOUSE (SLOW ENERGY)

Aimed at young people and adults, where an “unfolding” house is used to show how our existing houses can be transformed so that they hardly lose any energy, through passive means (Passivhaus applied).TIMETABLE: 17:00-20:00 hrs., Sat-Sun 11:00-14:00 hrs. and 17:00-20:00 hrs.

GENERAL SCHEDULES OF THE VILLA SOLAR 2012:

Everyday from 10:00 to 22:00 hrs*

*The Villa Solar will open its doors to the public as from 16:00 hrs on 14 September.

*The Villa Solar closes at 19:00 hrs on Saturday 29th.

OPENING SCHEDULES OF SDE 2012 HOUSES:

Mondays to Thursdays: from 16:00 to 20:00 hrs. (by reservation from 17th to 20th for professionals and from 24th to 27th for groups)

Saturdays and Sundays: from 10:00 hrs to 22:00 hrs

The decathletes who built the SDE 2012 Competition houses will explain their projects and technologies to the public in 15-minute visits around the inside of the houses. These visits should be booked in advance on week days, while from Fridays to Sundays, they can be visited by queuing. A system of booking visits to the houses will be activated on this website as from 3rd Septembern on www.sdeurope.org.

Simulación virtual de la Villa Solar 2012

Page 59: visitingguide1.pdf

1515

ACTIVITIES

CHILDREN AND YOUNG PEOPLE AO1 COMPETITION: “DRAW THE SUN’S ENERGY” (1-5 years and 6-10 years) This is an international competition for children aged between 0 – 10 years, who will depict solar energy and its uses. For this, they can use pencils, felt-tipped pens, water colors or crayons. Here you can find tables for the little ones, where they can paint, color in and use their imagination.TIMETABLE

AO2 EDUCATION GAMES AREA(0-5 years and 6-10 years) Space with blackboards, stories, building blocks, face-painting, story-telling…..TIMETABLE

AO3 WEB GAME: “ENERGY IN MY HOUSE”(6-10 years) Computer game for building your own house with 10ACTION. But bear in mind that your house has to do more than just look nice; it must also respect the environment and save energy.TIMETABLE

AO4 DISCOVER THE VILLA SOLAR (EDUCATIONAL BOOKLET)(6-10 years and 11-18 years) We explain what Solar Decathlon Europe is and each of the houses one by one, through activities and trials, during visits with your school or parents. The trail can be followed individually or in a group, with tests about SDE. In addition, you will find information about competitions and activities in which you can take part.TIMETABLE

AO5 SOLAR PASSPORT(6-10 years and 11-18 years) Use the Solar passport to collect the stamps you get in every house you visit.TIMETABLE

AO6 MADSCIENCE WORKSHOPS(0-5 years, 6-10 years and 11-18 years) Workshops on Science and Architecture. Discover how to amuse yourself with objects powered by solar energy and many other interesting things.TIMETABLE: Mon-Tue-Fri 10.30-12.30 for schools (see orange square)

AO7 MAKE YOUR OWN CITY - COAM WORKSHOP(0-5 years, 6-10 years and 11-18 years) Build your own sustainable city from recycled materials, designing furniture, hou-ses, parks and all types of buildings. Bring your box, can, tetrabric or kitchen towel roll and let your imagination flow free and form part of this entertaining project.TIMETABLE

AO8 SEE AND FEEL ENERGY. THERMOGRAPHY FOR ALL – COAM WORKSHOP(0-5 years, 6-10 years and 11-18 years) Come and have a thermographic photo taken and discover the temperature of your body and other materials.TIMETABLE

AO9 A_SHADOW2 – COAM WORKSHOP(6-10 years and 11-18 years) Cut out, fold, stick….. Make figures provided by shadows in this workshop that relate nature to Architecture.TIMETABLE

A1O THE RESTORABLE HOME (SLOW ENERGY) (6-10 years and 11-18 years) Here children (and their parents) will learn as they play about how to spend less on heating by applying techniques and solutions, as well as how to distinguish between different types of energy.TIMETABLE

A11 CICLALAB (11-18 years) Music and concerts powered by solar panels and energy generated by yourself pedaling our bicycles. A participative and ecological activity.Free use stage by advance booking.TIMETABLE: Fri-Sat-Sun in the afternoon

A12 DESIGN COMPETITION: “IDEAS FOR THE FUTURE”(11-18 years) Design competition on ideas for a more sustainable future: “Cities of the futu-re” and “Buildings of the future”. Free technique: drawings, models, text, music, photos, video… There will be prizes, such as Tablets or iPods, for the first three. Consult the rules on the website http://10action-teenagers.sdeurope.orgTIMETABLE

A13 PHOTOGRAPHY COMPETITION “FOCUS ON ENERGY”(11-18 years) Photography competition on themes related to SDE and the sun’s energy. Pho-tos will be sent via [email protected]. There will be prizes, such as Tablets or iPods, for the first three. Consult the rules on the website http://10ac-tion-teenagers.sdeurope.orgTIMETABLE

A14 MICRO-SHORT FILMS COMPETITION “I LIKE/I DON’T LIKE”(11-18 years) What every day object do you hate because you find it unnecessary and har-mful to the planet? Which do you admire for the common sense and honesty of its design? Upload your micro-short film and win: There will be prizes, such as Tablets or iPods, for the first three. Consult the rules on the website www.sdeurope.orgTIMETABLE

A15 RECYCLED SHADOWS (11-18 years) Using materials and objects that have lost their original condition, but keep their essence, we will create rest areas in the Villa Solar sheltered from the sun.TIMETABLE

Actividades para niñosen Solar DEcathlon Europe

14-30 SEPTEMBER

Friday from 17:00-20:00 hSaturaday and Sunday from 11:00 to14:00 h. and from 17:00 to 20:00 h.Tue, Wed and Fri by advance booking for groups and schools

Monday to Sunday from 10:00 to 22:00 h

Page 60: visitingguide1.pdf

1616

ACTIVITIES

UNIVERSITY STUDENTSAND PROFESSIONALS

ROUND TABLE DISCUSSIONS WITH MEMBERS OF THE INTERNATIONAL JURY FOR UNIVERSITY STUDENTS

At 19:00 hrs.

ARCHITECTURE (19 de septiembre) ENGINEERING (20 de septiembre) INDUSTRIALIZATION (21 de septiembre) COMMUNICATION (22 de septiembre) SUSTAINABILITY (26 de septiembre) ENERGY EFFICIENCY (27 deseptiembre)

CLASES TEÓRICAS Y DEBATES

ARQUITECTURA E INGENIERÍA DE LA EDIFICACIÓN UNIVERSIDAD DE ALCALÁ DE HENARES

MONDAYS AND THURSDAYSLectures: 10:00-11:00 hrs. and 16:00-17:00 hrsDiscussions: 13:00-14:00 hrs and 19:00-20:00 hrsPlace: ACTIVITIES TENT

Monday 17th | Morning

SOSTENIBILIDAD. MARCO + INTRODUCCIÓN A LA ARQUITECTURA SOSTENIBLE

Monday 17th | Afternoon

ARQUITECTURA SOSTENIBLE CONSTRUIDA

Thursday 20th | Morning and Afternoon

ARQUITECTURA VERNÁCULA Y SOSTENIBILIDAD

Monday 24th | Morning and Afternoon

INTRODUCCIÓN A LA UTILIZACIÓN DE MATERIALES Y TÉCNICAS CONSTRUCTIVAS DE BAJO IMPACTO AMBIENTAL

Thursday 27th | Morning and Afternoon

PREFABRICACIÓN E INDUSTRIALIZACIÓN. INTRODUCCIÓN A TÉCNICAS Y SISTEMAS OPTIMIZADOS

TALKSNote: The language of each talk is as per title.

Monday 17th

PRESENTACIÓN PROYECTO PAíS VASCO10:00-14:40 hrs | KÖMMERLING AUDITORIUMOrganized by EHU TEAM

SMART PATIO. REINVENTANDO LA CASA

MEDITERRÁNEA Y ANTICIPANDO EL FUTURO DE LA VIVIENDA

10:00-14:40 hrs | SCHNEIDER ELECTRIC AUDITORIUM | Organized by Andalucía TEAM

Tuesday 18th

CURSO 100 GBC 10:00-14:40 hrs | KÖMMERLING AUDITORIUMOrganized by Kömmerling/GBC

LA APORTACIÓN DE LOS PRODUCTOS A LA SOSTENIBILIDAD EN LA CONSTRUCCIÓN10:00-14:40 hrsSCHNEIDER ELECTRIC AUDITORIUMOrganized by IECA

Wednesday 19th

DÍA DE LA ARQUITECTURA. PRESENTACIÓN DE LOS PROYECTOS DE LA

EDICIÓN DEL SOLAR DECATHLON EUROPE 2012

10:00-14:40 hrs | KÖMMERLING AUDITORIUMOrganized by SDE2012, COAM and Kömmerling

INSTALACIONES DE RÉGIMEN ESPECIAL SEGURAS Y EFICIENTES 10:00-14:00 hrsSCHNEIDER ELECTRIC AUDITORIUMOrganized by APIEM

Thursday 20th

SOLAR FOTOVOLTAICA, AUTOCONSUMO Y ENERGÍA SOSTENIBLE 10:00-14:40 hrs | KÖMMERLING AUDITORIUMOrganized by UNEF

SMART CITY CENTRE 10:00 -14:00 hrsSCHNEIDER ELECTRIC AUDITORIUMOrganized by SDE2012 and Schneider Electric

Friday 21th

INDUSTRIALIZACIÓN DE VIVIENDAS 10:00-14:40 hrs | KÖMMERLING AUDITORIUMOrganized by SDE 2012

LA OPCIÓN DEL FACILITIES MANAGEMENT10:00-14:00 hrsSCHNEIDER ELECTRIC AUDITORIUMOrganized by SDE 2012

Monday 24th

LABORATORIO DE SOSTENIBILIDAD. EL HOGAR EFICIENTE 10:00-14:40 hrs | KÖMMERLING AUDITORIUMOrganized by Andalucía TEAM

PRESENTACIÓN MATELEC 10:00-14:00 hrsSCHNEIDER ELECTRIC AUDITORIUMOrganized by IFEMA

FUTURO DEL SOLAR DECAHTLON EN EUROPA 17:00-20:50 hrsAUDITORIO SCHNEIDER ELECTRICOrganized by ENERGY AVANTGARDE

Tuesday 25th

PROGRAMA URSOS 10:00-14:40 hrs | KÖMMERLING AUDITORIUMOrganized by IDAE

INTEGRACIÓN DE RENOVABLES EN LA RED Y EFICIENCIA ENERGÉTICA EN VIVIENDAS10:00-14:00 hrsSCHNEIDER ELECTRIC AUDITORIUMOrganized by SCHNEIDER ELECTRIC

Wednesday 26th

SISTEMAS DE CERTIFICACIÓN AMBIENTAL DE EDIFICIOS10:00-14:40 hrs | KÖMMERLING AUDITORIUMOrganized by Kömmerling

CONGRESO EUROPEO DE VIVIENDA SOCIAL10:00-14:00 hrsSCHNEIDER ELECTRIC AUDITORIUMOrganized by CECODHAS

Thursday 27th

SOSTENIBILIDAD, ENERGÍA Y EDUCACIÓN10:00-14:40 hrs | KÖMMERLING AUDITORIUMOrganized by SLOW ENERGY

EL FUTURO DE LA REHABILITACIÓN. CASA UPM /SD2O1210:00-14:00 hrsSCHNEIDER ELECTRIC AUDITORIUMOrganized by ANNER

Friday 28th

JORNADA POR DETERMINAR10:00-14:40 hrs | KÖMMERLING AUDITORIUM

PRESENTACIÓN DE LA CASA !10:00-14:00 hrsSCHNEIDER ELECTRIC AUDITORIUMOrganized by UNIZAR

Page 61: visitingguide1.pdf

17

PARTICIPANTTEAMS

tongjiteam para eco-house

china

andaluciateam patio 2.12

spain

grupo!_unizar casa !_unizar

spain

chibauniversity the omotenasi house

japan

teamecolar ecolar home

germany

odooproject

odoo

hungary

rhônealpes canopea

france

ceu teamvalencia smlsystem

spain

counter entropy team rwth aachenuniversity counter entropy housegermany

teambrasil ekó house

brazil

(e)coteam (e)co

spain

ehuteam ekihouse

spain

teamdtu fold

denmark

med initaly med in italy

italy

aquitainebordeauxcampussumbiosi

france

americanuniversityin cairoarkan

egypt

cem+nem- cem’ casasem movimentoportugal

astonyshine astonyshine

france-italy

prispa

prispa

romania

s01

s05

s09

s13

s17

s02

s06

s10

s14

s18

s03

s07

s11

s15

s19

s04

s08

s12

s16

Page 62: visitingguide1.pdf

The “Para Eco-House” combines both parametric and ecological strate-gies into the logic of the architectural language used in the house design. Both ‘Passive’ and ‘Active’ energy systems are utilized in this project. Going beyond the functional and environmental requirements, we create a paradigm for a low carbon future.

The concept of creating a multi-layer skin emerges from a combination of Dao theory in eastern philosophy and the theories of Michel Foucault in western thought, especially the ideas of autonomy in architecture.

Combining the ‘Active’ and ‘Passive’ environmental systems into a sym-biotic relationship with one another, the two philosophies merge and be-nefit from the mutual interaction.

By creating physical boundaries from the layering of the program, three in-between spaces emerge. The first occurrence is defined by the interac-tion of the external lattice skin and the glazed boundary of the enclosed house creating a semi-open area used for entrances and outdoor events. The next boundary encases space which defines the functional needs of the house.

The void between these private family functions creates an Inner court-yard: a private space in the heart of the home.

20 Ecological Strategies:

Photovoltaic panels, solar collector system, sun tracking solar panels, PVT system, gray water treatment and ventilation aid, wetland filter system, wa-ter south heat pump with heat recovery unit , rain water harvesting , eva-porating water cooling, architectural Shading ,innercourtyard ventilation , vertical green, composite skin system, VIP thermal proof wall, tempe-rature humidity independent control system, bamboo structure, bamboo furniture, mist propagation systems, smart control , LED lighting system. For example, motorized axis systems have been developed to position the solar panels directly in the suns raise throughout the day, making them 25% more efficient.

Floor plan

Section

name of the team name of the university

http://solardecathlon2012.tongji.edu.cn

name of the house country

Tongji Universitytongjiteam

Para Eco-House china

CONSTRUCTION AREA 128 m2

CONDITIONED VOLUME 167,4 m3

ESTIMATED ENERGY PRODUCTION 15.857 kWh/Year

ESTIMATED ENERGY CONSUMPTION 4.273 kWh/Year

TYPE OF PV MODULES Monocrystalline and amorphous silicon

INSTALLED PV POWER 8,76 kW

THERMAL TRANSMITTANCE: WALLS 0,12 W/m2k

THERMAL TRANSMITTANCE: GLASS --

THERMAL TRANSMITTANCE: FLOOR 0,12 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,12 W/m2k

ESTIMATED COST 287.000 !

ESTIMATED INDUSTRIALIZED COST 240.000 !

s01Site

18

Page 63: visitingguide1.pdf

19

Team Rhône-Alpes proposes an urban scale project called Canopea® to answer current issues about density in the alpine corridor cities where land is scarce and expensive because of the geophysical context. In a limited urban space due to the presence of mountains and rivers, we need to find solutions to live in dense cities while being close to nature. We need private space ma-king us feel at home while living in a collective apartment building in order to avoid urban sprawl. We need to reduce investments and maintenance costs due to the economical evolution of our country so that the majority can access to a positive energy home.

To do so, Team Rhône-Alpes came up with the nanotower concept.

Nanotowers are small towers housing an individual house on each floor. The top floor hosts a common laundry, a summer kitchen and a relaxing place for all the community. A common staircase and elevator services a cluster of three nanotowers. Passageways link them together. Gardens boxes, storage boxes and a recycling system create a friendly environment. People can enjoy all spatial qualities of an individual house while living in a dense urban centre and sharing a sense of community.

Each house is organised around three boxes which contain a technical core (HVAC equipment, bathroom, kitchen) a master bedroom and a flexible room that can be used as a TV room, a library, an office or an extra bedroom. In between these boxes, open living space offers fluidity. The inside space can expand on the outside. Peripheral terrace make the living area larger. Glass louvers facades provide protection against cold days winds and rains. They slide away to give way to solar screens during the hot ones. The building breathes according to seasons’ climate.

Nanotowers are integrated in the urban ecosystem of the city. Energy and information are exchanged and mutualised through smart grids in order to reach an instant optimal balance according to each component current needs concerning heating and cooling, electricity, mobility, services and social ne-tworks.

Team Rhône-Alpes promotes this territorial strategy in order to develop sus-tainable cities through rationalized sizing, mutualisation and social links rein-forcement.

Floorplan

Section

name of the team name of the university

www.solardecathlon.fr

name of the house country

École Nationale Supérieure d’Architecture de Grenoblerhône

alpes

canopea france

CONSTRUCTION AREA 195,9 m2

CONDITIONED VOLUME 202,5 m3

ESTIMATED ENERGY PRODUCTION 12.733 kWh/Year

ESTIMATED ENERGY CONSUMPTION 6.305 kWh/Year

TYPE OF PV MODULES Polycrystalline silicon

INSTALLED PV POWER 10,7 kW

THERMAL TRANSMITTANCE: WALLS 0,0875 W/m2k

THERMAL TRANSMITTANCE: GLASS --

THERMAL TRANSMITTANCE: FLOOR 0,0872 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,0796 W/m2k

ESTIMATED COST 700.000 !

ESTIMATED INDUSTRIALIZED COST 140.000 !

Site

s02

Page 64: visitingguide1.pdf

20

We believe that sustainability is not just a technological issue. Odooproject offers a new, more sustainable, healthier lifestyle, spending up to 50% of our time under the open sky. Our house features a new type of outdoor functional units, combining the advantages of traditional and modern lifes-tyle. We designed a summer kitchen and resting area where our daily activities – cooking, eating, relaxing and working - could be carried out at the greatest level of comfort.

The spaces of the house are used at different intensities in different sea-sons. We spend most of our winter in the heated house and we mostly stay on the terrace in summer. The spring and autumn transition periods or on summer evenings, the two parts become one united living area.

We integrated the solar panels of the roof and the façade to become do-minant aesthetic and architectural elements, defining the appearance of the house.

Odooproject features a unique passive surface heating-cooling system. It solves the issue of lacking thermal mass by adding insulated water tanks filled with collected rainwater. The tank is connected to the piping running in the floor and ceiling by a heat exchanger device.

In summer we can cool the water at night by sprinkling it on the roof to produce daytime heat demand. In winter we extract thermal load from the floor and transmit it to the buffer tank to use at night for heating.

To take full advantage of the advanced mechanical system, a unique auto-mation had to be created using existing tools that are freely configurable, to program our own application.

There’s a characteristic component of the house: the summer wall, which determines the house design and hosts a number of different features. It designates the space of the terrace, and incorporates the blocks neces-sary for the flexible use of the summer kitchen and summer living space. The vertical wall solar panels produce energy mainly in winter complemen-ting the roof panels perfectly. Accordingly, the electrical switchboard, me-chanical units and large tanks required by the passive cooling system are placed here, as well.

Floor plan

Section

name of the team name of the university

www.odooproject.com

name of the house country

budapest universityof technology y economicsodooproject

odoo hungary

CONSTRUCTION AREA 92,65 m2

CONDITIONED VOLUME 116 m3

ESTIMATED ENERGY PRODUCTION 13.301 kWh/Year

ESTIMATED ENERGY CONSUMPTION 5.775 kWh/Year

TYPE OF PV MODULES Monocrystalline and (a-Si/!-Si) thin-film modul

INSTALLED PV POWER 9,3 kW

THERMAL TRANSMITTANCE: WALLS 0,158 W/m2k

THERMAL TRANSMITTANCE: GLASS 0,6 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,145 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,153 W/m2k

ESTIMATED COST 360.100 !

ESTIMATED INDUSTRIALIZED COST 278.790 !

s03Site

20

Page 65: visitingguide1.pdf

21

An educated look at innovation.

Our main goal is rethinking innovation, through the development of low-bu-dget innovation, by finding alternative solutions to expensive systems and creating one of the most accessible solar houses - an alternative for the revival of traditional rural environments.

From the top...

The envelope is the main innovative element of PRISPA house, not being just the skin of the roof, but the element that protects and collects the energy from the outside space and transforms it.

...to the structure...

In order to keep our house easy to assemble and disassemble, and in or-der to make expansion possible, the structure of the house had to be mo-dular and simple. Thus, we decided to use I-joists beams (double T-sha-ped beams with an OSB heart and wooden feet). These have an efficient material distribution in section and a very good weight / resistance ratio, while their low weight greatly facilitates handling. The beams are coated on both sides with OSB 4 which uses non-toxic binding agents and gives the structural panel rigidity. The whole structure will be placed on a boar-ding platform made from a dense network of I-joist beams. Moreover, this type of beams will be used to create the roof panels as well.

...to the technical core...

Use of the air-to-air heat exchanger (or heat recovery module), when ne-cessary (in heat recovery mode-in order to assure the needed fresh air for hygienic living conditions and in free-cooling mode (using its by-pass), in order to diminish the heat load during the summer, whenever the external air temperature drops below 20ºC.

Strategic placing of thermal mass materials: on the floor near the South glazed surfaces (stone 1m wide strip) in order to absorb natural heat from the sun or the radiant panels and on the walls (clay finishing for regulating humidity).

...to everyday use

PRISPA House is designed for living, thus aiming at being a home instead of a showrrom. Its space meets contemporary comfort standards granted by the use of technology and materials, while keeping the atmoshpere Romanians are traditionally used to. It’s all about simplicity in design and quality lifestyle.

Section

name of the team name of the university

www.prispa.org

name of the house country

“ion mincu” university of architecture and urbanism technical university of civil engineering of bucharest university politehnica of bucharest

prispa

prispa romania

CONSTRUCTION AREA 116,85 m2

CONDITIONED VOLUME 260 m3

ESTIMATED ENERGY PRODUCTION 11.594 kWh/Year

ESTIMATED ENERGY CONSUMPTION 6.435 kWh/Year

TYPE OF PV MODULES Monocrystalline silicon

INSTALLED PV POWER 8,0 kW

THERMAL TRANSMITTANCE: WALLS 0,152 W/m2k

THERMAL TRANSMITTANCE: GLASS 0,805 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,142 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,171 W/m2k

ESTIMATED COST 90.o00 !

ESTIMATED INDUSTRIALIZED COST 70.000 !

Site

s04

21

Floorplan

Page 66: visitingguide1.pdf

22

We believe is necessary to react to the current situation, because the things that we could do now are important for the present. So our main strategy is experimenting with technology and materials that we could find at this time commercially, trying to make the difference now, not tomorrow.

DESIGN HIGHLIGHTS. Energy saving.

1. Form factor. The geometric form with the best relation between external surface and internal volume is the sphere (Form factor 0,48) or half sphere ( 0,58). Low places in the interior border of this kind of volumes aren´t useful for a house. That’s why the solution is using the next volume with better form factor, the cylinder ( 0,56). Reducing the surface means less heat losses between interior and exterior, and less energy consump-tion as a consequence.

2. Thermal mass in a portable and prefabricated system. One of the best passive strategies to keep a comfortable atmosphere in a house is the use of the thermal inertia of the materials. That is a real condition in the traditional buildings, but in the prefabricated systems is not common, and that is our innovation. For the envelope we are testing a sandwich made of Glass Reinforced Concrete (GRC) isolated with cork, and the inertia is improving just when is necessary with PCM (Phase Change Materials), which may accumulate energy without taking much space up. This is an important innovation mixing materials from different worlds, leaving aside the prejudices.

3. I+D+I in solar energy efficiency. We have opted for the trigeneration or combined cooling, heat and power. This house is prepared to use the simultaneous generation of electricity and useful heating and cooling from a solar heat collector. In this case we are testing the PV panels’ perfor-mance with an isolated a translucent material.

Section

name of the team name of the university

www.unizarcasapi.com

name of the house country

Universidad de ZaragozaGrupo !_Unizar

House !_Unizar spain

s05Site

22

CONSTRUCTION AREA 64,6 m2

CONDITIONED VOLUME 108 m3

ESTIMATED ENERGY PRODUCTION 10.080 kWh/Year

ESTIMATED ENERGY CONSUMPTION 4.728 kWh/Year

TYPE OF PV MODULES Polycrystalline silicon

INSTALLED PV POWER 8,8 kW

THERMAL TRANSMITTANCE: WALLS 0,27 W/m2k

THERMAL TRANSMITTANCE: GLASS 2.4 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,31 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,3 W/m2k

ESTIMATED COST 122.450 !

ESTIMATED INDUSTRIALIZED COST 85.715 ! Floorplan

Page 67: visitingguide1.pdf

23

s06Site

Sumbiosi is a house that evolves to create the best living environment pos-sible. The house is conceived as one space that you can open, close and separate according to the seasons, the time of the day or an event. Through this flexible space, Sumbiosi creates a new way of living in relation to the environment and nature. With the modularity of the house, Sumbiosi aims to reduce the urban sprawl, as it offers more functions in a small space.

Research into energy savings was integrated into all the technological inno-vations. They are articulated around three axes:

Energy is provided by a solar system that makes use of Fresnel lenses, which concentrate the sun’s rays by the equivalent of 500 times, so as to reduce the photovoltaic panels area. A tracking system completes this tech-nology to optimize the efficiency of the system. This enables cogeneration, with a 3 in 1 system producing electricity, domestic hot water, and a heat transfer fluid.

The home automation of the house is designed to facilitate the relation be-tween the housing and the inhabitant. It allows creation of an interface be-tween people and technology, so it’s easy for everybody to use.

Sumbiosi uses passive and semi-passive systems. Placed on the roof, the Ventec system is used to create a Venturi effect to optimize natural ventila-tion and to cool down the house during summer nights. Sumbiosi also uses a cooling system based on phase change materials. This system uses a natural phenomenon and only needs a fan to function.

To get a sustainable house also for the water cycle in the house, a “lom-brifiltre” recycles the grey water. This installation functions by the work of earthworms and by sedimentary layers filtering water. The drained off water from the tank is equivalent to mains water. It is reused for green roof irriga-tion or the carwash.

More than integrated, all these technologies become part of the architecture as they are major elements of the house design. Sumbiosi is really a combi-nation between the human being, architecture and technologies.

Floor plan

Section

name of the team name of the university

www.sumbiosi.com

name of the house country

bordeaux universityaquitaine bordeaux campus

sumbiosi france

23

CONSTRUCTION AREA 83 m2

CONDITIONED VOLUME 217 m3

ESTIMATED ENERGY PRODUCTION 9.550 kWh/Year

ESTIMATED ENERGY CONSUMPTION 5.720 kWh/Year

TYPE OF PV MODULES Polycrystalline silicon

INSTALLED PV POWER 6,2 kW

THERMAL TRANSMITTANCE: WALLS 0,157 W/m2k

THERMAL TRANSMITTANCE: GLASS 1,1 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,146 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,146 W/m2k

ESTIMATED COST 150.000 !

ESTIMATED INDUSTRIALIZED COST 70.000 !

Page 68: visitingguide1.pdf

24

998-2758_ES_2012_A-2GB.indd 1

s07Site

PREFABRICATIONSML system is a proposal for a house, which has prefabrication and indus-trialization as its main objectives. To prefabricate means to think of objects with a certain capacity for material and/or fundamental reproduction, thus opening the way for generation of base objects or projects, forerunners of an industrial series. In the case of SMLsystem the object generators of the industrial series are the container and the wet boxes.

ENERGY EFFICIENCYSMLsystem has been designed to minimize energy consumption; therefo-re all energy consuming equipment has a high energy efficiency. Besides, its use has been programmed to optimize its performance.

SOLAR ENERGYSolar energy is the main energy source of SMLsystem. The house has 21 photovoltaic panels on the roof and two photovoltaic façades facing east and west. Also DHW is provided by solar energy by means of two thermal solar panels.

EFICIENT AIR RENEWALThe SMLsystem’s ventilation equipment has been designed to renew the air while maintaining the inside comfort conditions. However, the air ex-change may result in having to heat/cool the incoming air to house tem-perature, which results in an energy cost. Therefore a heat exchanger has been installed which transfers heat/cold from rejected air to inlet air with 92% efficiency.

SELF-LEARNINGAll the appliances of the SMLsystem are linked to a self-learning module within the CAES (Computer Aided Energy Saving) system. This system will collect data on usage of the appliances which will be used to improve their performance. For instance, the system will turn off the bathroom light if it detects that nobody is at home.

SMART HEATING AND COOLINGThe efficiency of a HVAC system varies with outside temperature. In order to increase its efficiency, a HVAC system with different functioning modes has been designed, so the one providing greater efficiency can be chosen each time. It also includes two thermal storage tanks with phase change material.

Floor plan

name of the team name of the university

http://solardecathlon.uch.ceu.es/

name of the house country

universidad ceu cardenal herreraceu teamvalencia

sml system spain

CONSTRUCTION AREA 124,6 m2

CONDITIONED VOLUME 141,25 m3

ESTIMATED ENERGY PRODUCTION 7.680 kWh/Year

ESTIMATED ENERGY CONSUMPTION 4.690 kWh/Year

TYPE OF PV MODULES Polycrystalline silicon and CIGS

INSTALLED PV POWER 7,12 kW

THERMAL TRANSMITTANCE: WALLS 0,13 W/m2k

THERMAL TRANSMITTANCE: GLASS 0,8 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,77 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,35 W/m2k

ESTIMATED COST 194.856 !

ESTIMATED INDUSTRIALIZED COST 108.860 !

Alzado

Page 69: visitingguide1.pdf

25

Managing complex building environments while meeting your energy efficiency targets is

no small task. Our EcoStruxure™ energy managament architecture achieves this elegantly

through intelligent integration of building systems on a single IP platform.

The savings go far beyond buildings Today, only EcoStruxure energy management architecture by Schneider Electric™ delivers

up to 30% energy savings, uniting energy-intensive systems like HVAC, access control,

videp security management, and lighting control across your entire enterprise. Saving up

to 30% of building's energy is a great beginning, and thanks to EcoStruxure energy

managment architecture, the savings don't have to and there.

30%

30%* off your building'senergy bill is just the beginningimagine what we could do for the rest of your enterprise

Active Energy ManagementArchitecture from Power Plant to Plug™

Leam about saving energy from the experts!Download this white paper, a !170 value,

for FREE, and register to win and iPad®!. Visite www.SEreply.com Código de promoción 24256p

©2012 Schneider Electric. All Rights Reserved. Schneider Electric, EcoStruxure, and Active Energy Management Architecture from Power Plant to Plug are trademarks owned by Schneider Electric Industries SAS or its affiliated companies. All other trademarks are property of their respective owners.35 rue Joseph Monier, CS 30323, 95506 Rueil Malmaison Cedex (France) · 998-2758 *EcoStruxure architecturereduces enregy consumption by upto 30%

Data centres From the rack to the row to the room to the building, energy use and availability of these interconnected environments are closely monitored and adjust in real time.

Industrial plantsOpen standard protocols allow for system-wide management of autmated processes with minimizad downtime, increased throughput, and maximized energy efficiency

Buildings Intelligent integration of security, power lighting, electrical distribution, fire safety, HVAC, IT and telecomunications across the enterprise allows for reduced training operating, maintenance, and energy costs.

998-2758_ES_2012_A-2GB.indd 1 30/08/12 09:54

Page 70: visitingguide1.pdf

26

The unique design of the “Counter Entropy House” is based on the idea of a resource efficient, energy-optimized life cycle of a building in which both the production of components and their transport and eventual disposal are considered. Apart from products that are made of recycled material, it also includes direct or indirect “object recycling“, achieving an individual architectural solution, e.g. the facade made of melted CD panels, the floor of old beams of the Aachener stadium and the furnishing of reused woo-den boards collected from bulk rubbish.

Not only the architectural but also the interior design, like the furnishing, reveals the unique combination of multifunctional and space-saving con-figurations to create maximum space by optimal use and adaptation to current situations. By storing the newly developed glass elements in the “Functional blocks”, the private zone extends by the widely cantilevering roof and ensures maximum protected private space through the revolving curtain.

The outstanding and unique energy systems developed by the team can, according to the SDE rules, be described “passive”. Energy is supplied only by transferring heat-flows in carrier-fluids. No enclosed thermodyna-mic cycle is needed. The only consumption of electrical energy is caused by the circulation pumps for the different fluid cycles.

The “Counter Entropy House“is based on the idea of a thermal cooling system being much more sustainable than climatizing the house with elec-tricity. Thus the abandonment of a mechanical heat pump as the central element of the building services engineering is the main aim. Therefore a far-reaching use of solar thermal energy, during night and day, is used to provide the energy needed for air-conditioning. The solar thermal ener-gy provides significant advantages over the exclusive use of photovoltaic cells.

The second system, contributing to comfort conditions, is the cooling cei-ling fed by a special fluid circle. The following processes run in cooling mode: rain water from the tanks cools down the dispersion, water blended with PCM, within the cold-storage tank via a heat exchanger. The disper-sion in the cold-storage tank is pumped through the ceiling cooling down the room temperature by the means of radiation cooling.

name of the team name of the university

http://www.counter-entropy.org

name of the house country

rwth aachen universitycounter entropy teamrwth aachen university

counter entropy house germany

Section

Floor plan

s08Site

CONSTRUCTION AREA 49,1 m2

CONDITIONED VOLUME 170,25 m3

ESTIMATED ENERGY PRODUCTION 8.886,6 kWh/Year

ESTIMATED ENERGY CONSUMPTION 6.365 kWh/Year

TYPE OF PV MODULES Monocrystalline silicon

INSTALLED PV POWER 6,75 kW

THERMAL TRANSMITTANCE: WALLS 0,092 W/m2k

THERMAL TRANSMITTANCE: GLASS 0,7 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,105 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,075 W/m2k

ESTIMATED COST 542.000 !

ESTIMATED INDUSTRIALIZED COST 241.000 !

Page 71: visitingguide1.pdf

27

s09Site

name of the university

countryname of the house

name of the team

The prototype develops an innovative concept of house construction based on living modules that have been fully prefabricated, generating a high quality and very versatile product (marketing potential): the same prefabricated modules can be placed in several ways to satisfy different requirements. The user can freely compose the space of the house by an easy and fast assembly-disassembly process.Because of the absence of foundations and use of supports over the ground, we get a construction without footprint on landscape or residues after the house disassembly.

Greenhouse effect and control of energy lost: During winter days, the patio becomes a greenhouse. Its glass envelope captures solar radiation and the heated air is conducted to the conditioned rooms. At night, the patio and room openings are closed, in order to decrease energy lost through the walls and to use the patio as a thermal transition between the conditioned inside and the open outside.

Ventilation and evapotranspiration cooling of façades: During summer days, the solar radiation on the roof is controlled by the pergola, folding the glass panels and “opening” the patio, and letting the air flow through the vertical walls. Different wind pressures over the walls promote a con-tinuous airflow through the patio. At night, the glass cover is extended and the airflow becomes horizontal through the opened walls of the patio.Rainwater is collected along the sloping roof and used in the energy dis-sipation systems. A precise water cycle has been designed, in order to recycle every drop of water, except for those coming from sewage. The envelope’s ceramic panels are connected to a drip irrigation system that creates an evapotranspiration effect which cools the air gap at the facade, reducing the thermal load of the house.

The photovoltaic system has a double function: roof cover and electricity generation. Photovoltaic panels are placed on the living modules roof to create a ventilated air gap on small supports, with the appropriate inclina-tion to get the higher efficiency.

Panels placed on the top of the Technical Box are hybrid units, in such a way that thermal solar panels for the water conditioning are added under the photovoltaic units.

http://www.yaluciateam.org

patio 2.12 spain

universidades de sevilla,jaén, granada y málagaandalucía

team

Section

Floor plan

CONSTRUCTION AREA 107.13 m2

CONDITIONED VOLUME 128.64 m3

ESTIMATED ENERGY PRODUCTION 16.378,82 kWh/Year

ESTIMATED ENERGY CONSUMPTION 2.982,43 kWh/Year

TYPE OF PV MODULES Monocrystalline silicon

INSTALLED PV POWER 11,3 kW

THERMAL TRANSMITTANCE: WALLS 0,20 W/m2k

THERMAL TRANSMITTANCE: GLASS 0,70 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,12 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,18 W/m2k

ESTIMATED COST 500.000 !

ESTIMATED INDUSTRIALIZED COST 150.000 !

Page 72: visitingguide1.pdf

28

“Team Brasil has envisaged Ekó House as a Brazilian approach towards an integral house: A house that could bring about human prosperity wi-thout harming nature. Brazil should set an example for sustainable econo-mic growth and new ways of living are relevant to introduce small behavio-ral changes in everyday life. Thus, it is imperative to consider sustainability in broader terms, including social, economic and cultural dimensions.

The uniqueness of the Ekó construction is more concern with the de-sign and building process than high technology and innovative systems, that is why we emphasize the human sustainability concept. The housing deficit in Brazil is huge and the construction methods rely on unskilled labor. Therefore, the innovations were designed to impact housing defi-cit, changing the way housing is conceived and produced. Prefabrication methods reduce construction time and costs, while promoting labor skills by introducing new training processes. The wood and OSB prefabricated panels with glass wool insulation can be assembled on site in a few days. Plumbing and wiring between panels and cladding, are easily attached to the panels through a metal structure. Wood is a viable option that also contributes to enhance the awareness and management of Brazilian na-tural resources. It offers exceptional comfort conditions with low energy consumption, using glass wool and aerogel for insulation, double glass windows and doors, as well as framings with low heat transmission.

Rain water is collected for specific uses, and a dry composting toilet eli-minates the need for flushing water. The sewage is treated through local wetlands system of macrophytes plants that filters and eliminates the or-ganic load of the water, reused according to local legislation. This system greatly reduces the need for potable water, or centralized sewage treat-ment, a major innovation in housing infrastructure, particularly in areas of vulnerable environment in Brasil.

Home automation and information systems engage the dwellers in new forms related to living and natural cycles, based on online weather fore-cast. The Ekó House information systems can tell you the best times to perform various home activities, according to future weather conditions.”

Section

name of the team name of the university

www.ekobrasil.org

name of the house country

universidade federal de santa catarinauniversidade de sÃo pauloteam brasil

ekó house brazil

s10Site

CONSTRUCTION AREA 47,59 m2

CONDITIONED VOLUME 119,49 m3

ESTIMATED ENERGY PRODUCTION 21.157 kWh/Year

ESTIMATED ENERGY CONSUMPTION 6.836 kWh/Year

TYPE OF PV MODULES Monocrystalline silicon

INSTALLED PV POWER 11,04 kW

THERMAL TRANSMITTANCE: WALLS 0,15 W/m2k

THERMAL TRANSMITTANCE: GLASS 1,3 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,17 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,10 W/m2k

ESTIMATED COST 450.000 !

ESTIMATED INDUSTRIALIZED COST --Floorplan

Page 73: visitingguide1.pdf

29

(e)co project achieves environmental equilibrium by working with three elements: energy, materials and water. The house produces 100% of the energy it consumes through the photovoltaic panels. In order to reach this goal the prototype reduces energy consumption using the outer skin as a zero cost acclimatization machinery. In winter it works as a greenhouse, accumulating heat, and as a shading structure in summer, protecting the modules from the sun and also allowing natural cross ventilation in the house. (e)co house reduces up to 50% of the energy consumption by ta-king full advantage of bioclimatic systems. For extreme temperature days the modules are equipped with active air conditioning machinery designed by (e)co team. The machinery consists of a tank filled with gravel that stores heat in winter and cold in summer and works inside the modules as needed.

Another (e)co goal is to close the water cycle. For this purpose, the house collects rainwater and grey water. Then this water is cleaned and treated using natural methods of filtration and bioremediation in a wetland. The final clean water saving is up to 70%. Finally, in order to achieve environ-mental equilibrium, (e)co house is almost totally reusable or recyclable. The exterior skin materials are all reusable and removable. It could be reused as a house/ greenhouse/ storage/ shop, playground. Wooden in-terior modules are of organic biodegradable materials, so they are totally renewable. The materials strategy goes beyond zero waste. Therefore (e)co retrieves abandoned furniture, repairs it and reuses it in the house.

In UPC’s house, social equilibrium is represented by the active user in three ways. First, indefinite spaces allow users to use it according to their needs. The modules and the intermediate spaces are always ready to change according to seasons, family growth or user needs. Second, in-termediate spaces represent a new way of living, one with with comfort and privacy gradients. Third, the active user is always informed of the parameters of the house through the domotic (house automation) system in order to make it more efficient and more sustainable.

Floor plan

Section

name of the team name of the university

www.sdeupc.com

name of the house country

Universitat Politècnica de Catalunya (e)co team

(e)co spain

s11Site

CONSTRUCTION AREA 150 m2

CONDITIONED VOLUME 104,5 m3

ESTIMATED ENERGY PRODUCTION 5.900 kWh/Year

ESTIMATED ENERGY CONSUMPTION 4.222 kWh/Year

TYPE OF PV MODULES Monocrystalline silicon

INSTALLED PV POWER 4,6 kW

THERMAL TRANSMITTANCE: WALLS 0,331 W/m2k

THERMAL TRANSMITTANCE: GLASS 0,25 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,302 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,302 W/m2k

ESTIMATED COST 150.000 !

ESTIMATED INDUSTRIALIZED COST 110.000 !

Page 74: visitingguide1.pdf

30

The Rome Team is focusing the design of MED in Italy house on five points, essential for the Mediterranean house of tomorrow.

1 – Passive: In a Mediterranean climate, houses made of heavy stone or masonry walls work well as thermal masses that guarantee winter comfort and absorb thermal loads in summer. Wood technology in construction is well received by the market, it is useful for transportation and assembling, but it has mass values far from traditional masonry. A possible solution to this issue could be the addition to the wall layers, aside from insulation panels, of a void to be filled with local heavy infill materials once the house is assembled and installed on site.

2 – Active: The house of tomorrow produces all energy needed for its daily functioning, and even more. The house’s highly integrated design of PV surfaces could exploit both photovoltaic innovations: energy generation from diffused radiation and not only direct, and the possibility to have co-loured captive surfaces.

3 – Fast: The aims of the Mediterranean house of tomorrow are cost re-duction, performance optimization and construction time reduction. They are achieved through a strategy of advanced prefabrication: industrializa-tion of building components in a “mass customization” perspective; study of the assembly logic, related with ease of transportation, transfer to fac-tory of construction and testing of plumbing and the majority of HVAC systems.

4 - Eco-conscious: A careful choice of building materials is the response to the request of an honest balance with the environment. The most co-herent choice, in that sense, is the use of natural materials, coming from renewable sources, reusable at the end of the building lifecycle and recy-clable at the end of the product lifecycle.

5 – Dense: The efficiency of a building also passes through its potential density. It allows less ground consumption, but also less thermal loss and a reduction of construction cost. It is crucial, then, that the typological and constructive features of the new houses allow aggregation both horizon-tally and vertically.

name of the team name of the university

www.medinitaly.eu

name of the house country

università degli studi di roma tresapienza università di romafree university of bozenfraunhofer italy

med in italy

med in italy italy

Floor plan

Section

s12Site

CONSTRUCTION AREA 75,57 m2

CONDITIONED VOLUME 139,48 m3

ESTIMATED ENERGY PRODUCTION 9.330 kWh/Year

ESTIMATED ENERGY CONSUMPTION 5.070 kWh/Year

TYPE OF PV MODULES Polycrystalline silicon

INSTALLED PV POWER 11,4 kW

THERMAL TRANSMITTANCE: WALLS 0,177 W/m2k

THERMAL TRANSMITTANCE: GLASS 1,25 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,14 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,14 W/m2k

ESTIMATED COST 160.000 !

ESTIMATED INDUSTRIALIZED COST 125.000 !

Page 75: visitingguide1.pdf

31

Omotensashi means thoughtfully and sincerely conveying a feeling of consideration to those you encounter. It arises from Japanese traditional customs and practices such as tea ceremony or flower arranging. It is at the core of Japanese culture, values and ethics. The Omotenashi house is a new type of housing and lifestyle centered on promoting energy and food self sufficiency.

Nature – Life with Plants

This is a new experiment on reintroducing the agricultural environment into the residences of our towns and cities. The plant factory is used for the safe, rapid and efficient cultivation of crops. Because of the overall aging of the Japanese population, there has been a sharp decline in the farming populace and as a result local agricultural production. We are proposing a new way to live; including plants in daily life.

Engawa – Link to Outside

This is an “encounter space” existing from antiquity in Japanese buildings.Here you can encounter people, nature, the movement of time, even one’sown life. It is also a traditional intermediary space connecting the interior to the exterior of the house. Here you can enjoy activities such as growing plants or casually enjoying tea with visiting neighbors; it is a place for one to enjoy daily life. Sitting on moveable tatami mat units placed inthe engawa; this reconfi gurable semi outdoor space, along with the interior spaces, gives rise to a variety of living environments.

Sun – Health and Sustainability

Maximizing the use of solar energy, we are designing a house that is both good for the environment and one’s health. The house is built from pre-cise,robot-made units, reducing energy use and CO2 emissions during construction. Due to the utilization of roof tile-shaped solar panels, we can produce 1.7 times the electrical capacity produced by previous pa-nels, while presenting the appearance of a traditional Japanese roof. Also, Chiba University’s Preventative Medical Center, has been studying futu-re healthy home and town design. Applying the results of their research, Omotenashi House uses materials such as Japanese tatami and recycled decking, which regulate the indoor environment and produce low VOC’s. These are all biodegradable sustainable materials.

Floor plan

Section

name of the team name of the university

http://sde.chiba-u.jp

name of the house country

chiba universitychibauniversity

the omotenashi house japan

s13Site

CONSTRUCTION AREA 54,38 m2

CONDITIONED VOLUME 107,8 m3

ESTIMATED ENERGY PRODUCTION 13.374 kWh/Year

ESTIMATED ENERGY CONSUMPTION 8.302 kWh/Year

TYPE OF PV MODULES Monocrystalline and amorphous silicon

INSTALLED PV POWER 11,35 kW

THERMAL TRANSMITTANCE: WALLS 0,117 W/m2k

THERMAL TRANSMITTANCE: GLASS --

THERMAL TRANSMITTANCE: FLOOR 0,121 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,136 W/m2k

ESTIMATED COST 500.000 !

ESTIMATED INDUSTRIALIZED COST 250.000 !

Page 76: visitingguide1.pdf

32

More than a rotating house, “cem SDE” is a house that moves according to sun and light variations, not only in order to optimize production of solar energy (40% more energy production) but also to reduce heat consump-tion (80% less) and interior lighting requirements (30% less), thus redu-cing the environmental footprint.

The house is wrapped by a voltaic panels coated skin, which enfolds, pro-tects and “feeds” the house. The house reacts to sunlight and the solar panel covering can have two different movements, so it is adapt¬ed to summer and winter needs.

The house feeds itself from the sun following it as it rises and sets by a movement of approximately 180º from east to west. This sunflower effect, combined with the movements of the solar panels, maximizes solar gain.

With this system, production of energy will be 2,5 times greater than the energy consumption needs of the house, taking into account that the house rotation corresponds only to six lamp bulbs consumption and the cover rotation consumption is less than that of an iron.

Every moment the movements of the house and its elements create new in-terior and exterior spaces, adapting the house to one’s daily life throughout the day. The perspective one has changes as the day goes by.

In this project the use of traditional Portuguese materials is reflected in the use of cork for interior and exterior coating and wood for the struc¬ture, both highly sustainable and good thermal and acoustic insulating materials.

Evolutionary system: the modular structure has been designed to adapt to its residents’ needs, evolving according to the family living there. It can “grow” and become smaller depending on the lifestyle and the demands of the family at different stages in their lives.

It’s a house that adapts itself to the owner and environment and not the other way around.

Floor plan

Section

name of the team name of the university

www.casasemmovimento.com

name of the house country

Universidade do Portocem+nem-

cem’ casas em movimento portugal

s14Site

CONSTRUCTION AREA 83,50 m2

CONDITIONED VOLUME 123 m3

ESTIMATED ENERGY PRODUCTION 12.220 kWh/Year

ESTIMATED ENERGY CONSUMPTION 3.885 kWh/Year

TYPE OF PV MODULES Polycrystalline silicon

INSTALLED PV POWER 9,24 kW

THERMAL TRANSMITTANCE: WALLS 0,26 W/m2k

THERMAL TRANSMITTANCE: GLASS 1,0 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,48 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,33 W/m2k

ESTIMATED COST 300.000 !

ESTIMATED INDUSTRIALIZED COST 150.000 !

Page 77: visitingguide1.pdf

33

Creating a Healthy FutureKÖMMERLING helps you to create a space for tranquility and well-being in your life, while at the same time preserving the planet’s natural resources.

KÖMMERLING window systems use 100% recyclable and lead-free materials, which achieve energy savings and a reduction in CO2 emissions thanks to their isolating capacity.

KÖMMERLING, a pioneering brand in environmental protection, follows an ambitious Sustainable Development Program and proudly carries the Aenor Seal of Environmental Management to certify their commitment.

KÖMMERLING Sustainable Development Program

Participate in the KOMMERLING PRIZE for the crowd’s favourite house

O F F I C I A L S P O N S O R

www.viviendasaludable.es/solar-decathlon

www.kommerling.com W i n d o w s y s t e m s

L e a d - f r e e

Page 78: visitingguide1.pdf

34

The main strategy of the house is to reduce energy needs, take advantage of the natural resources of the location and use innovative systems to create the proper conditions for living.

-Flexibility

To achieve the main strategy, the house has a flexible design which can be adapted to the requirements of both climate and user. This adaptation allows proper conditions to be provided inside the house regardless of whether it is winter or summer.

One of the innovative systems used is the double-layer facade. The in-terior skins are glazing surfaces and the exterior perforated steel panels. The different-sized perforations, creating a personalized pattern, help to control solar incidence in the interior. These layers are movable, so the house can have different configurations in order to adjust to exterior cli-mate conditions. The house could be even completely opened onto the terrace, boosting the concept of flexibility.

The design of the structure creates a continuous interior space and the furniture is not static, so the user can move the furnishing creating diffe-rent combinations adapted to the requirements of each moment.

-Conscious design

Thus a conscious design is the team’s strategy to reduce energy needs, making a more efficient house in all aspects.

The house is designed to be taken by standard trucks split into two modu-les, reducing transportation’s energy costs.

The over-hanging roof on the South facade allows the sun to go inside the house during winter to warm it up, while in summer it helps keep the house in shade and reduce the temperature. So, the solar roof, where photovol-taic panels are situated, includes both active electricity production and passive bioclimatic strategies.

Another innovative system is the exterior floor, Termogenik wood floor. This system consists in thermally modifying wood, improving its durability and stability without requiring chemical treatment.

The illumination of the house is obtained thanks to natural light during the daytime, taking advantage of south and north glazing facades. At night, highly efficient artificial lighting systems are used, employing LED techno-logy, which generates more light from less energy.

Floor plan

Section

name of the team name of the university

www.ekihouse.org

name of the house country

Universidad del Country Vasco(Euskal Herriko Unibertsitatea)ehu team

ekihouse spain

s15Site

CONSTRUCTION AREA 51 m2

CONDITIONED VOLUME 169 m3

ESTIMATED ENERGY PRODUCTION 5.856 kWh/Year

ESTIMATED ENERGY CONSUMPTION 13.740 kWh/Year

TYPE OF PV MODULES Vidrio policristalino

INSTALLED PV POWER 11,98 kW

THERMAL TRANSMITTANCE: WALLS 0,325 W/m2k

THERMAL TRANSMITTANCE: GLASS 0,755 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,263 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,24 W/m2k

ESTIMATED COST 234.020 !

ESTIMATED INDUSTRIALIZED COST 219.873 !

Page 79: visitingguide1.pdf

35

Vernacular Architecture: Arkan maximizes the use of natural ventilation and daylighting. Small windows protected by horizontal and vertical shading devices in the South, East, and West minimize direct sunlight penetration while large glass areas in the North maximize the benefits of diffused dayli-ght. The “Mashrabiyya” or decorative screen covers reduce solar gain.

Solar Thermal Driven Adsorption Chiller: Hot water generated from the solar thermal system through the evacuated tube collector is used for three major systems in Arkan: heating, cooling and domestic water use. These can be seen in Detail 1. For heating, the hot water will pass through fan coils and the heat will be distributed throughout Arkan. In the case of cooling, an adsorption chiller will be used and so the hot water supplied will be used in the generator section of the chiller.

HVAC Reversing Mechanism: This system takes advantage of the air buo-yancy force to aid the air distribution process. The duct network is divided into two sections; one is underneath the floor and the other linked to high wall grilles. During the cooling mode, the air is supplied from the high wall grilles, and the return grilles are installed in the floor, thus profiting from the high density of cold air. During the heating mode, the functioning of the duct system is reversed. Air will be supplied from the floor grilles and the high wall grilles will serve as return grilles, thus profiting from the low density of warm air.

Grey Water Treatment: Grey water treatment systems recycle domestic grey water for use in irrigation, toilet flushing, and other tasks that can use recycled water. The grey water passes through a series of filters including sediment filter, carbon filter, and color filter which remove fine particles, chemical compounds and pigments from the water, respectively.

TempCon: TempCon panels are the main building elements of Arkan. They are composed of an insulation layer sandwiched between two layers of steel. It has the advantage of being rigid which makes it easy to handle and transport. Additionally, it has a built in insulation and flat surfaces that will insure it’s visually appealing.

Floor plan

Section

name of the team name of the university

www.slides-s.com

name of the house country

american university in cairoamerican universityin cairo

arkan egypt

s16Site

CONSTRUCTION AREA 78 m2

CONDITIONED VOLUME 255 m3

ESTIMATED ENERGY PRODUCTION 14.300 kWh/Year

ESTIMATED ENERGY CONSUMPTION 6.300 kWh/Year

TYPE OF PV MODULES Monocrystalline silicon

INSTALLED PV POWER 9,6 kW

THERMAL TRANSMITTANCE: WALLS 1,88 W/m2k

THERMAL TRANSMITTANCE: GLASS --

THERMAL TRANSMITTANCE: FLOOR 1,16 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,69 W/m2k

ESTIMATED COST 160.200 !

ESTIMATED INDUSTRIALIZED COST 80.100 !

Page 80: visitingguide1.pdf

36

The name ECOLAR comprises the words “ecological” and “solar” as well as “economic” and “modular”. To translate these main objectives into a building, we have developed the ECOLAR building set system. It contains all the elements necessary to build an ECOLAR house.

The basic construction is always the same. It consists of columns and beams which are built as box girder profiles. The constructive material is wood and the hollow spaces are filled with an insulation of hemp. There-fore the construction provides a high bearing capacity and good insulation values. Flexible joints enable the extension and deconstruction of the buil-ding or parts of it at any time. All columns and beams are identical; that’s why they can be produced in series and with a high level of accuracy. This also reduces manufacturing costs.

The façades are also produced in series, but several types are available. For the ECOLAR Home 2012 we decided to use three different faça-de-elements that have been selected and optimized for the climate condi-tions of Madrid and their orientation to the sun. The northern and southern walls are designed as translucent elements. The eastern and western façades are opaque and comprise a newly developed solar-hybrid-system. Room-high glass sliding doors grant access to the patios.

The whole roof is covered with innovative solar panels which are available in an opaque and a semi-transparent design. The latter type is installed above the patios for natural lighting. The multifunctional panels serve many different purposes, such as water bearing surface, passive and active hea-ting, cooling and generation of electricity.

Inside the ECOLAR Home, the concept of flexibility and modularity con-tinues with the Super cabinet. Its floor-to-ceiling elements include all the technical devices, the furniture and even the bathroom. This allows diffe-rent scenarios of usage every day.

An intelligent home automation system provides maximum comfort while meeting the highest energy standards.

By using only natural building materials and renewable energy sources, the ECOLAR Home is highly ecological and sustainable.

Floor plan

Section

name of the team name of the university

WWW.ECOLAR.de

name of the house country

university of applied sciences konstanzecolar

ecolar HOME germany

s17Site

CONSTRUCTION AREA 114 m2

CONDITIONED VOLUME 396 m3

ESTIMATED ENERGY PRODUCTION 14.371 kWh/Year

ESTIMATED ENERGY CONSUMPTION 5.480 kWh/Year

TYPE OF PV MODULES Polycrystalline silicon

INSTALLED PV POWER 13,3 kW

THERMAL TRANSMITTANCE: WALLS 0,05 W/m2k

THERMAL TRANSMITTANCE: GLASS 0,5 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,13 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,13 W/m2k

ESTIMATED COST 350.000 !

ESTIMATED INDUSTRIALIZED COST 200.000 !

Page 81: visitingguide1.pdf

37

Astonyshine aims at the integration of new energetically efficient techno-logies in the architecture of solar powered houses and at the definition of new concepts in architectural design based on these technologies, with the ultimate goal of proposing innovative solutions and increasing the per-formance of more traditional ones.

Six key issues delineate Astonyshine’s strategy:

- The use of freestone in building, which, thanks to advanced technologies and new design methods, shows promise of sustainability and energy effi-ciency, together with great aesthetic appearance -both classical and new, low-tech definition, and hygro-thermal advantages.

- The call upon concentrated solar power systems, possibly combining photovoltaics and thermal, to answer to the house’s energetic needs with higher efficiency and lower prices than standard photovoltaic flat panels, by proposing new ideas for their morphological and technological integra-tion in architecture and testing recently appeared technologies. Concen-trated photovoltaic systems make the use of high performance but costly cells possible, limiting the cost of the installation; furthermore they optimi-ze the use of raw materials such as polysilicon, reducing shortage risks.

- The control of the photovoltaic field with electronic systems embedded into each module and suitably controlled to extract the maximum energy. Such control allows for the reconfiguration of this field---as a consequen-ce of external factors that hinder, at least partly, energy production---to minimize module mismatch and shadowing losses more efficiently than standard maximum power point tracking centralized converters.

- The research of new design, materials, and technologies, for the interfa-ce between the solar module and the building structure, including tempe-rature control, ventilation, and caulk issues, pre-fabrication problems and production costs reduction for a significative commercial impact.

- The search for optimal illumination, both natural and artificial, to satisfy illuminance criteria designed according to functionality and architectural needs and create spatial effects through lighting design.

- The integration of architectural and structural design with project logis-tics, intended to reduce the overall cost of the product and increase its quality and sustainability.

Section

name of the team name of the university

www.astonyshine.com

name of the house country

Ecole nationale supérieure d’architecture Paris-MalaquaisUniversità di FerraraEcole des Ponts ParisTechPolitecnico di Bari

astonyshine

astonyshine france-italy

s18Site

CONSTRUCTION AREA 96,7 m2

CONDITIONED VOLUME 306 m3

ESTIMATED ENERGY PRODUCTION 15.000 kWh/Year

ESTIMATED ENERGY CONSUMPTION 6.100 kWh/Year

TYPE OF PV MODULES Monocrystalline silicon

INSTALLED PV POWER 11,35 kW

THERMAL TRANSMITTANCE: WALLS 0,11 W/m2k

THERMAL TRANSMITTANCE: GLASS 0,625 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,126 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,125 W/m2k

ESTIMATED COST 290.000 !

ESTIMATED INDUSTRIALIZED COST 100.000 !Floorplan

Page 82: visitingguide1.pdf

38

The key features of FOLD have one thing in common: They take energy efficiency and ”liveability” to quite a new level. They are part of the main strategy to create the sustainable house of tomorrow – today! They are so integrated in the architectural, structural and energy narrative of FOLD that they become defining factors. FOLD would not be FOLD without these features.

The solar cells from RAcell comprise a unique system developed purely for FOLD. The elegant thinfilm solar cells on the roof cover a hot water system placed underneath the solar cells. This PVT system contributes to the house with electricity as well as hot water. And the thickness? Only 86 mm.

The slender design of the walls and the roof is crucial to the architectural concept of FOLD. This is only made possible by a special combination of very strong Finnish Kerto wood and Rockwool Aerowolle. The slabs are constructed as sandwich elements with Kerto wood on both sides and Rockwool between the wooden slabs. On both sides of the slabs a layer of high-insulating Rockwool Aerowolle is mounted. This construction pre-vents thermal bridges, thus minimizing the thickness of the slabs to create the slender FOLD.

The structural spine of FOLD is what we call the”superfurniture”: The te-chnical core. The technical core is also built from Kerto wood, and it is the only supporting member inside the house. The technical core is equiped with all essential features of the house. Bathroom, toilet, technical room and kitchen. It is the”brain of the house” so to say – and it fits into one single standard container, enabling pre-fabrication to keep the cost down.

The heating and cooling system of the house is also a unique solution de-veloped specifically for FOLD. Traditional floor heating panels are placed on both floor and ceiling surfaces. The PVT system on the roof supplies the floor heating with hot water, while a callibrated control system and the high-performance Nilan unit converts the heat from the PVTs into energy to drive the cooling system placed in the ceiling.

Floor plan

Section

name of the team name of the university

http://www.solardecathlon.dk

name of the house country

Technical Universityof denmarkteam dtu

fold denmark

s19Site

CONSTRUCTION AREA 105,31 m2

CONDITIONED VOLUME 191 m3

ESTIMATED ENERGY PRODUCTION 11.391 kWh/Year

ESTIMATED ENERGY CONSUMPTION 6.076 kWh/Year

TYPE OF PV MODULES Microcrystalline silicon

INSTALLED PV POWER 9,2 kW

THERMAL TRANSMITTANCE: WALLS 0,095 W/m2k

THERMAL TRANSMITTANCE: GLASS 1,04 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,096 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,096 W/m2k

ESTIMATED COST 319.225 !

ESTIMATED INDUSTRIALIZED COST 212.000 !

Page 83: visitingguide1.pdf

39

COLLABORATORSHOUSES

sde10 universidadpolitécnicade madrid

echorbuilding cemexholmiclafargeportland valderribas

garnica

modulabgarnica plywood

fabriq-21

q-21hsm

eykos

saint-gobainwanner

c01

c02 c03 c04 c05

Page 84: visitingguide1.pdf

4040

The aim of the project is to develop a new industrialized system throu-gh a light and sustainable construction, producing a competitive system, focusing specially on its effects on energy saving and greenhouse gas emissions.

Innovative technical solutions were chosen, bearing in mind principles such as: an industrialized and versatile system, high quality, efficient cons-truction, , customization, improving sustainability, bioclimatic architecture and optimization of thermal and photovoltaic solar energy, among others.

The SD10 building is a basic unit prototype, but in reality it was designed to be used in a cluster, forming a housing block, being much more sustai-nable in that form than as an individual entity.

The orientation was chosen to optimize the potential of the location. Whe-re the occupants spend most time is south-facing. The north-facing sec-tion includes the installations-room and entrance, creating a thermal buffer. The installations-room connects directly with the bathroom and kitchen through the ceiling. Kitchens are west and east-facing.

Apart from energy efficient materials, aiming at reaching a sustainable ar-chitecture, the use of natural materials like wood and cork was incorpo-rated, serving as structure, insulation and finish. Using these materials in interior finishes produces warm and cosy areas for the user.

Natural elements are integrated into the architecture, in places like the facade or in the building’s roof, which apart from performing various func-tions, are well adapted to Madrid’s dry climate, as they provide humidity for the atmosphere.

The construction system is made up of 3D and 2D elements, with the aim of reducing transportation costs, impeding transportation of empty modules. As a result of this decision, the installations-room, bathroom and kitchen are all 3D modules and the sitting room 2D modules.

This house was already assembled in Solar Decathlon 2010, and it was a very positive experience. Assembly time was 6 hours, and the finishings, furniture and illumination were completed in 2 days.

name of the house name of the university

http://2010.sdeurope.org

universidad politécnicade madridsde10

CONSTRUCTION AREA 117,20 m2

CONDITIONED VOLUME 262.6 m3

ESTIMATED ENERGY PRODUCTION 12.560 kWh/Year

ESTIMATED ENERGY CONSUMPTION 12.173 kWh/Year

TYPE OF PV MODULES Teluro de cadmio

INSTALLED PV POWER 9,1 kW

THERMAL TRANSMITTANCE: WALLS 0,38 W/m2k

THERMAL TRANSMITTANCE: CEILING 0,30 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,30 W/m2k

ESTIMATED INDUSTRIALIZED COST 250.000 !

3D module 2D pieces 2D pieces 2D pieces

Framework assembly Enclosure assemblyopaque and translucent

Opaque enclosure Glass enclosure Framework

c01Site

Page 85: visitingguide1.pdf

4141

Up until now, construction work has developed without thought to its environ-mental impact, its consumption of resources and waste emissions produced. It is, however, precisely the awareness of this environmental problem which necessarily leads us to invent new models and techniques of sustainable cons-truction.

FabriQ-21, a new way of building in modules, both sustainable and industria-lized, is the fruit of collaboration between Q-21 architecture and HSM Home Systems Modules. These are light and flexible houses, which can be assembled and disassembled, transported, modified and easily expanded, according to changing needs. The FABRIQ-21 prototype is a minimum-sized 32 m2 dwe-lling, forerunner of a whole series of houses, which allows the end product to be easily personalized, by making small changes in size and distribution, height and materials used.

FABRIQ-21 generates modular projects, both sustainable and industrialized, based on:Ecology – Closing the materials cycle.Bioclimatic Design – Design in keeping with the surroundings. Energy Efficiency – A building’s energy rating.

NOMBRE DE LA CASA company

www.fabriq-21.es

q-21hsm

Fabriq-21

The ECHOR building develops a type of housing module which, in a cluster, could turn a set of buildings into a housing block.

The ECHOR building is designed as a simple prismatic container, approximately 10 x 10, in which one of its sides is fractured, forming a U shape to resolve access.

The result of distributing such spaces on a single level gives rise to a prismatic building with two differentiated “boxes”: the bigger one, which houses the exhibi-tion area and two offices, and the smaller one, dislocated with respect to the first, which resolves access to the building.

Each of the two boxes comprising the building’s facade is made of prefabricated concrete panels. These panels rest on the foundation, also made of prefabrica-ted concrete, and covered with reinforced concrete floor slabs and hollowcore concrete slabs.

The project is thus economically and visually-speaking simple, placing value on the visible concrete covering in two colours – pearly grey for the larger box and red for the smaller U-shaped box, thereby showing the intrinsic versatility of the material – one of the great advantages of this construction option.

The name ECHOR – sustainable construction efficiency in concrete – is aimed at uniting these concepts in one project:

allows greater thermal stability, since it diminishes variations of indoor tempe-rature.

the structures, floors, outside walls and partitions between living spaces are made of concrete, sufficient thermal inertia to reduce energy consumption.

from fire and extremes of weather.

house.

name of the house company

www.echormigon.es

cemexholmiclafargePortland valderribas

echorbuilding

c02 c03Site Site

CONSTRUCTED AREA 32,24 m2

CONDITIONED VOLUME 8,10 m3

ESTIMATED ENERGY PRODUCTION 332,5 kWh/Year

ESTIMATED ENERGY CONSUMPTION 950 kWh/Year

PV POWER 280 W

PHOTOVOLTAIC PANELS High performance polycrystalline silicon

THERMAL TRANSMITTANCE: FACADE 0,22 W/m2k

THERMAL TRANSMITTANCE: ROOF 0,33 W/m2k

THERMAL TRANSMITTANCE: FLOOR 0,26 W/m2k

THERMAL TRANSMITTANCE: GLASS 1,1-1,3 W/m2k

ESTIMATED COST OF HOUSING PROTOTYPE (32m2) 1.600 !/m2

ESTIMATED COST OF A 6 MODULE HOUSE (96m2) 1.100 !/m2

Page 86: visitingguide1.pdf

4242

GARNICA by MODULAB is a joint project by the MODULAB architectural studio and GARNICA PLYWOOD, plywood panels manufacturer: a construction which is comfortable, industrialized, sustainable, energy efficient and affordable, based on a building system with various applications – housing, hostelry, blocks of flats, offices….

The construction philosophy makes sustainability the framework within which design and production strategies take shape. Projects include a weekend house, with a comfortable living space, minimal impact from cons-truction work and maximum performance.

Project architecture is based on a kit assembly system, which creates a matrix of 1,5m x 1,5m modules, to allow numerous options. The structure is based on structural sandwich panels, with an extruded polystyrene core and poplar plywood structural elements, together with a system of micro-laminated wooden beams supporting a flat roof. The highly efficient 10cm thick polystyrene insulation in the enclosure and roof panels, back-ventilated air chamber and wooden frames with 4/12/6 insulating glass, promote ex-cellent thermal behavior overall.For this reason, the total energy saving is some 8,16% more than the norm for a building of this nature.

At Saint-Gobain we have created an innovative building system based on production by modules, pre-fabrication and industrialization, which has the advantages of having higher quality than traditional systems, being more economical and having a lower environmental impact. All these conditions have allowed AYKOS by SG WANNER to improve their technology and make savings on scale which, in turn, guarantee high building quality stan-dards and competitive prices. AYKOS by SG WANNER aim to do things differently and get more for less. This difference is based on the following four basic cornerstones: quality, innovation, speed and sustainability.

*(36m2 of house + 9 m2 porch, making up 50%)

www.sistemamodulab.es www.aykos.comwww.garnicaplywood.com

name of the house name of the housecompany company

modulabgarnicaplywood

saintgobainwAnner

garnica eykos

c04 c05Site Site

CONSTRUCTED AREA 40,5 m2 *

CONDITIONED VOLUME 96 m3

ESTIMATED ENERGY CONSUMPTION 5.302 kWh/Year

ESTIMATED INDUSTRIALIZED COST 30.000 !

PHOTOVOLTAIC PANELS High performance polycrystalline silicon

THERMAL TRANSMITTANCE: FACADE, ROOF AND FLOOR 0,33 W/m2k

THERMAL TRANSMITTANCE: WOODWORK 1,3 W/m2k

THERMAL TRANSMITTANCE: GLASS 2,9 W/m2k

Page 87: visitingguide1.pdf

UPM’s Black&White at 2009 SD edition

Page 88: visitingguide1.pdf

44

SOLARDECATHLONEUROPE

W W W. S D E U R O P E . O R G

/sdeurope @sdeurope

The contents of this brochure reflect its author and not necessarily the opinion of the European Union. Neither the EACI no the European Commission are responsible for the use made of information contained therein.

ORGANIZERS

SPONSORS

COLLABORATORS

MEDIA PARTNER

VILLA SOLAR COLLABORATORS

EXHIBITION HOUSES

SDE10 UPM HOUSE COLLABORATORS

R

Asociación Nacional de Empresas de Rehabilitación y Reforma

CENTRO DE AUTOMÁTICA Y ROBÓTICA

CSICCONSEJO SUPERIOR DE INVESTIGACIONES CIENTÍFICAS

INSTITUTO DE CIENCIAS AGRARIAS (ICA)

GRUPO CEMENTOS PORTLAND VALDERRIVAS

CSICCONSEJO SUPERIOR DE INVESTIGACIONES CIENTÍFICAS

INSTITUTO DE CIENCIAS AGRARIAS (ICA)