VISTA OIL & GAS INDUSTRIES

Pressure Vessel & Pipeline Equipment

INTRODUCTION Vista Inc. is a leading company in the design and manufacture of pressure Vessel and

pipeline equipments for the Oil & Gas, Petrochemical, Power plant and other process

industries.

Vista manufacture Fix Equipment such as Quick Opening Closure, Pressure Vessels, Pig

Launcher and Receiver Traps, different types of Separators, shell & tube Heat Exchangers,

Air Cooled heat exchangers and Chemical Packages.

Vista provides a complete and engineered service package. Our skilled staff procedures a

wide range of projects from conceptual design, to final product. We design and build

package including, but not limited to: Simple Vessels, Pig Launcher & Receiver Trap Mobile

Package and Separator Package. Our drafting team will work with you build a product to your

exact specification.

QUICK OPENING CLOSURE (V100®)

Description

Vista, Inc.’s Clamp Ring Closures are quick-opening closures, easily operated by one person. The closure is designed primarily for horizontal installation, meaning the door swings open on the horizontal axis. However, the closure can be installed on a vertical installation. In the latter case, a counterbalance can be provided to facilitate opening.

Features The Clamp Ring Closures, available in sizes 4-inches and larger, offer important advantages: A reliable seal – The large, cross-sectional diameter Seal located on the periphery of the closure’s barrel collar provides positive sealing as well as protection from damage by tools, pigs or debris. Pressure warning device – The Clamp Ring Closures are equipped with a pressure warning lock, in accordance with UG-35 of ASME Sect. VIII, Div. 1, to alert the operator to the existence of internal pressure prior to opening the closure. Fast, easy, safe operation – One person can easily and quickly open or close the Clamp Ring Closures. Because it operates so easily, this closure is less time-consuming than other closures on

the market. Because an operator must stand to the side when opening the pressure warning lock, clamp ring and

door, the Clamp Ring Closures is safer to open than other closures that require an operator to stand in front of the door. Clamp Ring Closures feature a lever-type actuator on sizes 4- through 30-inches. Sizes 32-inches and larger have a door assist (ratchet binder).Closures smaller than 32-inches at higher pressure also may feature a door assist mechanism.

Representative Uses Tube Turns Hinged Closures are being employed in virtually every industrial field. Some of the more representative uses include:

Gas, Oil and Products Pipelines

Scraper traps, blowdowns, scrubbers, filter separators/coalescers, terminal manifolds, meter provers, storage tanks, autoclaves, Terminal Manifolds and drier pots.

Processing

Mixing and cooking vessels, extractors, filters, hand-holes in distillation towers, storage tanks, vacuum-service equipment, etc.

Petroleum Production and Refining

Quick-opening blinds on “Christmas trees”, sweetening vessels, storage tanks, strainers and filters.

Surface Transportation

Manways on tanker trucks, hatch and manway covers on barges and ships, etc.

VISTA Industrial Group Safe and Secure Sealing

Open or Close in Less Than 30 Seconds

Technical Specification

NEW TECHNOLOGY TESTED

The Vista Quick Opening Closure has been fully tested under extreme high pressure for its performance.

ABAQUS & ANSYS Finite Element Method Non-Linear Analysis

All Vista Closures are computer

designed. Special closures are analyzed using the latest ABAQUS & ANSYS Finite Element Package.

Vista’s engineers are meeting the challenge of these ever changing industries by continuing to improve the performance of existing products and developing new

products and equipment.

Design Fabrication Features The Vista QUICK OPENING CLOSURES are fabricated from ASTM A-105N or 350-LF2 and forgings or ASTM A-516-70 plate. For special applications, Vista closures can be furnished in alloy materials, as well as weld overlayed. The Vista closure is also available in MS ratings, or may be custom designed under ASME VIII, Div.1, Appendix 24, Div 2, or other applicable construction code authority. The Vista Quick Opening Closure has been fully tested under extreme high pressure for its performance. QUICK OPENING CLOSURES are manufactured from ring rolled forgings that permit larger closure designs and are not limited to standard diameters. Closures can be designed for the customer’s exact operating requirements, rather than using the (often considerably heavier than required) ANSI series.

Size Range 6” to 100” Nominal diameter

Class Ratings ASME 150# through to 2500#

Design Specifications ASME VIII Division 1 ASME VIII Division 2 PD 5500 / BS EN 13445

Closure Orientation Horizontal or Vertical

Termination Design Specifications

ASME B31.3, B31.4, B31.8 Other International standards are available on request

Types of Connection Butt Welded, Butt Welded with mitre for inclined/declined vessels or Flanged to clients requirements

Materials of Construction

ASTM A350 LF2 / ASME II SA350 LF2 ASTM A105 / ASME II SA105 ASTM A694 F42 to ASTM A694 F70 Grade 304L or 316L Stainless Steel Duplex Stainless Steel (UNS S31803)

Elastomeric Sealing Nitrile, Viton and ED Resistant elastomers Other material options available on request

Standard Closure Finish Removable rust preventative for client to finish paint after welding to vessel

Special Closure Finish Electroless Nickel Plated Grade 316 Stainless Steel or Inconnel 625 Weld Overlay

Accessories

The Vista’s closure can be fitted with a all types of interlocks available on request. Horizontal Closures can be supplied with protective weather covers (Vertical closures are supplied with protective weather covers as standard)

Unique Seal The purpose designed servo acting double edged lip seal energizes at zero pressure. It is housed in the door face for protection and long life and is easily fitted without tools. The one piece moulding is available in a range of elastomers and at the highest pressure, incorporates a stainless steel spring to prevent extrusion and provides a full vacuum capability. The one piece seal design aids in function in both horizontal and vertical applications.

PIG LAUNCHER & RECEIVER TRAP (V200®)

PIG TRAP DESCRIPTION Pipeline production and maintenance

operations include the practice of

inserting a mechanical plug (pig) or

inflatable ball (sphere) into the pipeline line and allowing the production fluid to

drive it from one end to the other.

The Pig Trap is the equipment purposely

designed for performing this job.

It is basically consisting of:

a main body or "barrel", for pig storing;

a quick opening closure (QOC) for

inserting or removing the pigs,

manually or motor operated

(electric, hydraulic or pneumatic);

a tube end, for connecting the trap

to the pipeline;

fluid by-pass nozzle, for pig motion

control; minor fitting nozzles, for pressure

and temperature gauges, safety

valves, drains, vents, etc.;

saddles or equivalent supports.

Pig operations are generally carried out

for the purpose of:

Removing hydrotest water and

debris accumulated within the

pipeline, particularly during its pre-

commissioning, by using "gauging" pigs;

Cleaning the internal surface of the

pipeline, for the removal of the

deposited oil wax, by using

"cleaning" pig or spheres;

Separating two fluids, according to

production requirements by using

"separation" pigs;

Inspecting the conditions of the line pipes, by using special inspection

vehicles.

Traps are generally installed at the

opposite ends of the pipeline, but they

may be also mounted at intermediate

stations, depending on service

requirements.

Trap Size Range Our common manufacturing range of pig traps spans from 4" to 64" line diameters,

but traps of larger sizes can be designed

and manufactured by FILTERS.

Pressure range, from ANSI 150 to ANSI

2500. Any value of diameter, pressure and

temperature can be calculated by our

designers, in order to define the most

appropriate barrel thickness. The barrel

length is affected by the trap type (launching or receiving), by the pig type

(ordinary, sphere, or inspection vehicle)

and by the required launching sequence

(single or multiple).

Design Codes Our pig traps are usually designed in

accordance with the following

internationally recognized codes:

ASME VIII DIV.1&2

ASME/ANSI B31.4, 31.8, 31.3, for

liquid and gas piping systems.

We are however in a position to meet the

requirements of any National Code or

specification the customer may require.

VISTA

Industrial Group Pipeline Equipment

Pig Handling System On major line diameters, where the weight of the pig makes handling difficult, some mechanical devices can be used to carry out loading and unloading operations more easily and quickly. The most complete FILTERS system designed for this job includes: A Travelling Trolley for

extracting and inserting the pig supporting cradle into and out of the trap, complete with runways and control winch.

A Removable Bar to be mounted on the trolley head for pushing the pig along the cradle.

A rotating Jib Crane, for lifting, positioning and lowering the pig outside the trap.

The system can be either hand operated or motor controlled (electric, hydraulic or pneumatic powered).

TRAP TYPES LAUNCHING TRAPS Designed for inserting the pig into the line

RECEIVING TRAPS Designed for taking the pig out of the line

BI-DIRECTIONAL TRAPS Designed to perform both launching

BARREL (in) 10 12 16 16 20 24 30 36 42 48 48 56 64

MAIN LINE (in) 6 8 10 12 16 20 24 30 36 40 42 48 56

A(mm) 3230 4100 4050 4050 4300 3000 3400 3550 3850 3800 3800 3580 3650

B (mm) 500 500 500 600 600 1000 1000 1000 1500 1500 1500 1500 1500

C(mm) 178 203 356 356 508 508 610 610 610 711 711 915 915

L1 (mm) 3908 4803 4906 5006 5408 4508 5010 5160 5960 6011 6011 5996 6065

D (mm) 2000 2300 4300 4360 4360 3650 3950 4000 4000 4000 4900 5000 4800

E(mm) 500 500 500 600 600 1000 1000 1000 1500 1500 1500 2000 2000

F (mm) 178 203 356 356 508 508 610 610 610 711 711 915 915

L2(mm) 2678 3003 5156 5316 5468 5158 5560 5610 6110 6211 7111 7915 7715

KICKER(in) 4 4 4 4 6 8 8 10 12 16 16 16 20

P.G (in) 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2

PIG SIG. (in) 2 2 2 2 2 2 2 2 2 2 2 2 2

VENT (in) 2 2 2 2 4 4 4 4 4 4 4 4 4

DRAIN (in) 4 4 4 4 4 4 4 4 6 6 6 6 6

TROLLY yes yes yes yes yes yes yes yes

JIB CRAIN yes yes yes yes yes yes yes yes

CAPACITY (ton) 1 2 2 2 3 3

BASKET yes yes yes yes yes yes yes yes

and receiving operations. Regarding the position of their installation, traps can be: Horizontal The Trap is resting on saddles of equal height. It is the most used type, particularly where heavy pigs are to be handled. Vertical The trap is resting on circumferential supports. This type is often used where the trap installation area is limited, particularly on offshore platforms.

SLOPED The trap is resting on saddles of different height. Sloped traps are generally used for sphere operation, in order to use the gravity for rolling the spheres along the trap barrel.

PIG LAUNCHER AND RECEIVER DIMENSIONS FOR GAS PIPELINE

Pig Passage Indicator or Pig Signaler The purpose of the passage indicator is to detect the passage of pigs inside the pipeline. Our Pig Signaller consists basically of: a supporting bush, to be welded on the line

pipe; a threaded or flanged sleeve, to be mounted

on the supporting bush, including a sliding domed plunger and a suitable lever system,

a counter weighted warning flag.

PIG LAUNCHER AND RECEIVER DIMENSIONS FOR OIL PIPELINE

A B C D E F G H VENT DRAIN

6” 8” 2” 152 3000 1000 3000 3000

2”

2”

8” 10” 2” 178 3000 1000 3000 3000

10” 12” 3” 203 3000 1000 3000 3000

12” 16” 4” 356 3000 1000 3000 3000

14” 18” 4” 381 3000 1000 3000 3000

4”

16” 20” 4” 508 3000 1000 3000 3000

18” 24” 6” 508 3000 1500 3000 3000

20” 24” 6” 508 3000 1500 3000 3000

4”

24” 30” 8” 610 3000 1500 3000 3000

26” 30” 8” 610 3000 1500 3000 3000

28” 32” 10” 610 3000 1500 3000 3000

30” 36” 10” 610 3000 1500 3000 3000

32” 36” 10” 610 3000 1500 3000 3000

36” 42” 12” 610 4000 2000 4000 4000

42” 48” 12” 710 4000 2000 4000 4000

48” 60” 16” 710 4000 2000 4000 4000

52” 60” 16” 710 4000 2000 4000 4000

56” 60” 16” 710 4000 2000 4000 4000

FILTER SEPARATOR (V300®)

Description

Vista Gas Liquid Filter Separators are a two-stage design construction for the removal of both solid particles and liquid droplets, or liquid droplets only.

The contaminated gas enters the first section and passes through the filter elements.

Separation of the liquid particles occurs in the same manner inside the Glass Fiber Media. But the media is treated so that the liquid particles do not wet the fibers but coalesce into large droplets, from 100 to 200 times their original size, due to their surface attraction for each other:

The gas flowing through the filter media causes the larger droplets to emerge into the center core of the glass fiber elements and to be carried out to the liquid stripper section. Here a Vane Mist Extractor removes coalesced liquid droplets, which are stripped out and drained into the sump vessel for subsequent recovery. Liquid carry-over is totally prevented and separating efficiency of 99,99% on one-micron size droplets is easily achieved.

The pressure loss on the entire operation is extremely low and depends on operating conditions and by the type of filter elements used.

Vista Gas Liquid Filter Separators are manufactured either in a vertical shell, or in horizontal shell, with flange or quick opening closure to facilitate the access to the filter.

Performance Features Vista Filter Separators provide economical, effective, highly efficient removal of solid and liquid particles from gas streams. This helps protect valuable mechanical equipment and optimize the efficiency of processes.

Typical Applications Gas distribution systems

Compressor stations

Pipelines

Metering and regulation stations

Natural gas plants

Power plants

Refineries

Petrochemical plants

Chemical plants

Vane Mist Extractors Extensive Vista engineering and testing has shown vane spacing, pocket depth, and sizings are critical to the capacity and efficiency of vane elements. Tight control of these parameters during fabrication ensures Vista quality, an integral part of our vane performance.

Configurations Vista Filter Separators are available in vertical or horizontal, and single or double-barrel configurations. Access to the filter elements can be full diameter and quick opening closure designs.

VISTA Industrial Group For High-Efficiency Separation of both

Solid and Liquid Contaminants

Performance Guarantee Vista Filter Separators are guaranteed to remove 100% of all liquid droplets 8 microns and larger and remove 99% of those 0.5 to 8 microns in size. The minimum guaranteed solid particle removal is 100% of 3 micron and larger and 99% for those 0.5 to 1 micron in size.

PRESSURE VESSELS (V400®) VISTA

Industrial Group Safe and Secure Sealing

Carbon steel and Stainless Steel Pressure Vessel

Description

Vista Manufacturing is an industry

authority in all types of pressure vessel construction, partnering with natural

gas processors, oil refineries and petrochemical companies to construct

safe, conforming vessels, columns and towers. Our high-performance oil and

gas pressure vessel designs include:

Knockout Drums Absorber vessels

Packaged Vessel 2 phase separators

3 phase separators Slug catchers

Dehydrators Towers

Bulk vessels

Our pressure vessels can be

constructed with a range of capacity,

material and wall thickness options, and is certified in accordance with the

ASME Boiler and Pressure Vessel Code,

Section VIII, Division 1. In addition,

NRG’s state-of-the-art facility operates under strict API, ISO and HSE

guidelines, so our quality control

processes ensure that each product

operates efficiently, safely and

durably.

We guarantee an unwavering

commitment to high-caliber craftsmanship and fast turnaround,

and our equipment is designed to be

both affordable and built to last.

Knockout Drums

An expert in pressure vessel

construction, Vista Manufacturing serves oil refineries, natural gas plants,

petrochemical plants and geothermal

power providers with made-to-order

knockout drums and other vapor-liquid separators. Knockout vessels come

with a variety of fabrication options,

and their capacity, size, construction material, wall thickness and corrosion

allowance can be customized based on

your project requirements.

Vista knockout drums can be

configured horizontally or vertically, and are certified in accordance with

the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1. In

addition to being easy to install and maintain, our state-of-the-art vessels

include high quality sealing systems

and secure pressure monitors. Upon

order placement, your knockout vessel

is built to specs and tested thoroughly, by quality control specialists for both

performance and safety.

Remember to contact Vista when your

facility, plant or site requires knockout

vessels. Our engineering experts are

experienced in the design, retrofit and

fabrication of all types of industrial pressure vessels, and we guarantee

fast turnaround, expedited delivery

affordable pricing and superior

craftsmanship.

Absorber Vessels

An industry leader in the design and

construction of absorber vessels,

VISTA Manufacturing assures that our

custom pressure vessels are durable, dependable and ASME certified to

meet your detailed project

specifications. Gas absorber vessels are

chambers designed to dissolve high concentrations of gaseous components

into liquids. No matter what liquid and

gas concentrations your application requires, our in-house engineering

crew can customize absorber vessels to your project specifications. In

addition, VISTA offers amine absorber pressure vessels that can be retrofitted

to an existing system or built to specs for new projects.

Our company is known for its complete

quality control processes, which begin

2 Phase Separators

Available in horizontal and

vertical designs, Vista’s ASME 2

phase separators ensure efficient, cost-effective

separation of gas/liquid inlet

streams. Vista Manufacturing

serves the oil & gas industry, along with a variety of other

professional arenas, and we

manufacture each separator based upon your application

requirements and materials

preference. In addition, you will

find our pricing, turnaround time and product performance to be

the best in the industry.

When you purchase two-phase

separators for gas separation from VISTA, you’ll enjoy the

following features and benefits:

Industry-leading removal

efficiency Equipment durability

capable of withstanding

harsh conditions Value-priced construction

for tight budgets ASME custom designs

Carbon, stainless steel and other materials availability

Maintenance-free design

piping and valves—and are customized based on supplied specifications.

Ready to order a modular vessel

package? Ask our qualified staff about the

following options and standard equipment options:

Choice of construction and insulation

material Made-to-order vessel capacities

Custom closure styles Optional safety valves and shut-

down mechanisms Horizontal and vertical vessel designs

Maximum stress resistance Ladders and platforms

At Vista, our packaged vessels and modular systems are designed for high

performance and cost savings, and each piece of equipment is built by expert

craftsman and tested by our quality

control team.

upon order placement and continue

through delivery and installation. We’ve manufactured hundreds of

pressure vessels, and our high-

efficiency absorbers are operationally reliable, easily installed and available

in a wide range of capacities. In addition to manufacturing absorber

vessels, Vista engineers specialize in the customization and manufacture of

all ASME Division 1, Section VIII pressure vessels. Vista also offers

absorber vessels, slug catchers or 2

and 3 phase separators. Our high-quality equipment is cost effective, low

maintenance and adaptable, and each

pressure vessel is designed with your

safety in mind.

Packaged Vessels

Vista Manufacturing supplies oil & gas, water treatment and petrochemical

companies around the world with high

quality pressure vessels, vessel components and modular vessel

packages to fulfill a variety of industrial

and commercial requirements.

Mounted on skids for easy transport and installation, VISTA packaged

vessels come with your choice of skids,

Putting your company’s safety and performance first, our engineers

strictly adhere to all ISO, API and ASME

guidelines. Our quality control

processes begin the moment you place

your order, and we offer complete reports following all destructive and

non-destructive testing processes.

3 Phase Separator

Ensuring efficient, cost-effective

separation of gas, oil and water, Vista’s

3 phase separators are available in sizes and configurations that suit your

application specifics. Our engineering

team fabricates and constructs each ASME 3 phase separator based on your

measurements and materials

preference, and our pricing,

turnarounds and design performance are the best in the industry.

Vista three phase separators have a variety of strengths, including their

maintenance-free designs, unmatched

durability and impressive removal

efficiency. In addition, we can create

your three phase separators using stainless steel or carbon steel

materials. Whether you choose

vertical or horizontal separator

designs, our quality control processes ensure the integrity and safety of each

2 or 3 phase separator. Additionally,

VISTA provides coalescers that meet

ASME standards and can be used for 3

phase separation.

Slug Catcher

Vista Manufacturing is an industry

leader in liquid separation equipment, and carries both “U” and “R” stamps

through ASME Section VIII, Div. 1. Our

engineering team fabricates and

manufactures oil and gas pressure

vessels and system components for liquid separation and storage, and our

slug catchers, launchers and receivers are constructed to fit your custom

specifications. Vista’s vast experience in field construction ensures that each

slug catcher and components you receive is cost-effective and easy to

install, saving your company both time and money.

Vista slug catchers are a versatile way

of dealing with liquid slugs that cause costly mechanical and process

problems, thereby promoting efficient liquid and solid particle separation.

Benefits of ordering a Vista customized slug catcher include:

Economical slug catching and

particle separation

Short lead times and fast turnarounds

Large storage volume Modifiable design configuration

and phase addition Prevention of carry-over

Simplified cleaning of sludge manifolds

With decades of expertise in the pressure vessel industry, we operate

under strict ISO, API and ASME guidelines—ensuring that each piece

of equipment you purchase is the safest and most effective option

available.

`

VISTA Inc.

Oil & Gas Industries Address: St. 106, No.3 Industrial Estate, Arak, Iran

President of Company Mobile: +98 918 161 5381 Commercial Manager Mobile: +98 918 364 9257

Tel: +98 861 355 3981-2 Fax: +98 861 355 3982

Web Site: www.vista-indgroup.com Email: vistacommercial@gmail.com

Professional Development

The information contained herein is based on data and information developed in the Laboratories of Sypris Technologies (‘Seller”), but is presented without guarantee or warranty, and the seller disclaims any liability incurred from the use thereof. Nothing contained herein is to be construed as a recommendation for any use, including without limitation, any use in a commercial process not controlled by seller, nor for a use which is in violation of any existing patent, foreign or domestic or of applicable laws and regulations