Visu SitkaCatalog

Construction

welded steel

powder coating

damping elements

foam strips to prevent interior damage

quality German fittings

Bed / table plywoods

plywood with HPL laminate

CNC processed

holes for ventilation

quality German fittings

foldable alu table leg same color as construction

Mattresses

7 parts

Velcro fastening

7cm mattress foam

covered with firm cloth

Visu Tashka

4× textile removable bag with handles

easy snap by pins

Kortexin material with PVC coating

total space 300 l

Sitka

Weight is changing depending on the car model. The heaviest part is up to 25 kg.

Total weight should not exceed80 kg.

Visu Sitka is attached by 4 textile straps placed in the corners.

Using these straps you can safely and easily attach Sitka to the anchor points in the van floor.

Bed lenght185 cm – longer half175 cm – shorter half

Bed widthdepend on the width of the interior

Table120×43 cm

Weight Anchoring Dimensions

Variability15 mm high plywood has a lot of features and play a big role in Sitka. Its basic position is bed, but using a table leg you can easily make comfortable sitting with table in 10 seconds.

VentilationThere are milled holes in the whole plywood, except table. These holes guarantee good air flow, aven at the bottom of mattresses.

Storage spaceThe lids of the benches on the both sides of Sitka are used as hinged lids and allow access to Tashkas below them.

SurfacePlywood is HPL laminated from both sides and its possible to choose from 2 colors – light and very dark grey.

Top plates

Quality solid mattressRelaxation is very important part of traveling. That‘s why our mattresses is made from 5 cm solid foam RE 100 and 2 cm of soft foam for your comfortable sleeping and sitting.

Resistance & maintenanceMattresses are covered with washable unsuspecting cloth, sewn with outdoor threads that are extremely durable.

Everything at its placeMattresses sticks tight to plywood thanks to Velcros. In the sitting position the two middle parts of mattresses are attached to the sides of the car interior and create comfy backrest.

Air flowWhen sleeping in such a small space as a van, getting wet is much faster than, for example, in the bedroom. Therefore it is important to ventilate the mattresses. That ensures the holes in the plywood.

Upholstery

– bed – in the basic position

– table and seating – using hinged table leg,takes up to 10 seconds

– good air flow thanks to the milled holesin plywoods

– hinged lids of the benches ensure the accessto Tashkas below them

– 5 cm solid foam RE 100+ 2 cm soft foam in the upper part

– durable and unsuspecting clothas a cover of the mattresses

– sticked tight to plywood by the Velcros,displacement prevented

– the „table parts“ is used as backrestswhen sitting

Say NO to annoying unpackingYou will appreaciate Tashkas especially when (un)packing. Thanks to the practical attachment by pins you can easily put Tashka in or out of the construction. So your stuff can be packed at home and then just carried to the van.

Access anytime, anywhereYou have an easy access to all your stuff during all the time you travel thanks to hinged lids of the benches.

Colossal storage space300 litres of space. Enough for everything you need on your travels (even everything you don‘t actually need).

Practicality firstWe make Tashkas in 3 colors where every single one has bottom side in black color. That‘s because of practicality in terms of maintenance.

Tashka

Stable constructionConstruction forms a skeleton of Sitka. It‘s welded from steel and provide sufficient support, also it has coating of powder coating.

Sturdy and easy anchoringThe whole construction is attached to the anchor points in the van floor with a set of anchoring elements.

Ready to go in 10 minutesThe heaviest part of Sitka (the bench) is up to25 kg (depending on the type of car) and so the installation can be handled by one man and it only takes up to 10 minutes.

No clapping or screechingYou can find damping elements between the construction and plywood. They make Sitka soundproof even when riding on a very uneven surface.

Usage

– 300 litres of storage space in total

– practical attachment by the pins to the Sitka construction

– comfortable access using hinged lids

– easier packing and unpacking

– stable steel construction withpowder coating

– attachement by 4 textile strapsto the anchor points in the van floor

– the heaviest part is up to 25 kg, the installationcan handle one man in 10 minutes

– Sitka is soundproofed thanks to the damping elements

25

Universal grey All black

Fresh green

HPL

Mattress

Tashka

Frame

Light grey

Dark grey

Light grey

Black grey(RAL 7021)

HPL

Mattress

Tashka

Frame

Light grey

Black

Dark grey

Black grey (RAL 7021)

HPL

Mattress

Tashka

Frame

Light grey

Black

Fresh green

Black grey (RAL 7021)

New car? No need to buy a new Sitka!Sitka is likely to last longer than the van but that doesn‘t mean you have to buy a new one. We are able to modify your Sitka to your new vehicle. The price always depends on the differencies of the vans.

Visu Sitka contains

— a bed / table and a comfortable seating— 4× Visu Tashka – 300 l of storage space— 7 cm high comfy mattresses— anchor elements

Compatibility

Sitka can be customized for almost every medium van.

An upadted list of vehicles which is Sitka already readyfor can be found at: visu.camp/en/products

If your car is not at the list yet, don‘t worry. It‘s the matterof minutes to measure it an customize Sitka for your van.

Delivery time

6-8 weeks

Ordersweb: www.visu.campemail: hello@visu.camp

Stay wild.www.visu.camp