BOSS Wiring Devices

BOSS Electrical Panels• Panel Hardware

BOSS Lighting• Hazardous Location Fluorescents• Quartz Halogen Floodlights

PLUS...

The BOSS 500 Quartz Halogen Floodlight is a rugged-duty lightfor general work area lighting. The bolt-on lens cover sealstightly to a high-temperature gasket for a reliable weatherproofseal. The lens itself is Armour Plate glass. This light will shinebright through the harshest of weather.

500W QUARTZ HALOGEN FLOODLIGHT• GENERAL PURPOSE FLOODLIGHT

~ Not rated for hazardous locations

TRUNNION MOUNT

BOSS 500

• NO CLAMPS~ Bolt-on Lens Cover

• HIGH TEMPERATURE GASKET AND SILICONE~ Eliminates Residue Build-up

• HIGH TEMPERATURE INSULATION~ Protects incoming wiring

POST MOUNT

BOSS - 500 - ______(Mounting Option)

EXAMPLE: BOSS-500-P

BOSS 500 POSTTRUNNION

MODEL MOUNTING OPTION

ITEM PART ID #500W QUARTZ HALOGEN Q500T3/CLQUARTZ HALOGEN SOCKET 555BOSS 500 POST MOUNT BOSS -1051 BOSS-1055BOSS 500 TRUNNION MOUNT BOSS-1056BOSS 500 LENS IN FRAME BOSS500LOBOSS 500 LENS ONLY (armour plate Glass) BOSS-50-11BOSS 500 SILICONE GASKET BOSS-50-10BOSS 500 LENS FRAME ONLY BOSS-50-12HIGH-TEMPERATURE SILICONE BOSS-LPG53140

REPLACEMENT PARTS

Ordering Information

• HIGH IMPACT POLYCARBONATE LENS• SOFT NEOPRENE GASKET• DRAINAGE SLOT• FLAT MOUNT BACK BRACKETS• AVAILABLE IN BOTH 2’ & 4’ MODELS

BOSS 485-2EM – EMERGENCY FIXTURE [Inset C]

• 30 MINUTES OF EMERGENCY LIGHTING• CHARGE INDICATOR LIGHT• ON/OFF SWITCH

~ Turn emergency ballast OFF during transport or storage

EMERGENCY FIXTURE

Approval for:• Class I – Div. 2 – Groups A, B, C, & D• Class I – Zone 2 – IIA, IIB, IIC• Class II – Div. 2 – Groups F & G• Class III

~ Enclosure Suitable for Wet Locations~ Electronic Ballast (Inputs: 135 W; 120V – 277V; 60HZ/50HZ)

~ Maximum Ambient Temperature +55*C (Temp Code T4A T4)~ Magnetic Ballast (Inputs: 145W; 120V; 60HZ)

• INNOVATIVE MOUNTING SYSTEM [Inset A]~ Sliding Back Mount Brackets

• EASY INSTALLATION & Maintenance• HIGH IMPACT ACRYLIC LENS

~ Fewer Repairs• SAFETY CABLE ATTACHMENT [Inset B]• SOFT NEOPRENE GASKET

~ Creates optimum seal• DRAINAGE SLOTS• CONVENTIONAL END MOUNTING OPTION• SPRING-LOADED SOCKET ASSEMBLY• AVAILABLE IN BOTH 2’ & 4’ MODELS

BOSS 483

BOSS 485

A

B

C

• EXPLOSION-PROOF SEALS AND BALLAST HOUSING~ Emergency ballast in separate housing (when added)

• CONVENTIONAL MOUNTING BRACKETS• CHANGING LAMPS?

~ Unthread the cap, slide the socket out of the way, and it's in-and-out. Easy!

To truly be able to call ourselves specialists in Hazardous Area lighting, what would webe without a fixture rated for Class I, Division 1 locations? Through the joint buyingpower with our proprietary distributor—ESCOM Electrical Distributors—BOSS is ableto offer our customers explosion-proof fluorescent lights at incredibly competitiveprices. The 2-lamp, 4' fluorescent fixture is the perfect choice for general lighting inClass I, Division 1 rated areas. It is also available as an Emergency Fixture as well. Sofor your explosion-proof lighting needs...BE SURE TO CONTACT OUR SALESREPRESENTATIVE TO GET YOU WHAT YOU NEED.

Explosion-Proof Fluorescent Lights

BOSS - _________ - _______ - ______Model Ballast Finish (Optional)

EXAMPLE: BOSS-483-2Four-foot, flat-lens fluorescent w/electronic ballast

NEED REPLACEMENT PARTS? NOT USING BOSS LIGHTS?BOSS Lenses and Frames (complete) fit most competitor's equivalent models. Hinges, latches and keepers do too.

All BOSS parts are CSA approved.

MODEL BALLAST FINISH

REPLACEMENT PARTS

4834’ Flat Lens

2432’ Flat Lens

4854’ Bubble Lens

2452’ Bubble Lens

MAGNETIC

ELECTRONIC2

EMERGENCY2EM

STANDARDRAW

ALUMINUM

POWDERCOATED

ITEM PART ID #4 FOOT FLUORESCENTS F48T12/CW/HO2 FOOT FLUORESCENTS F24T12/CW/HOFLUORESCENT SOCKETS 523BOSS 483/243 BRACKETS BOSS-1060 BOSS-1061BOSS SAFETY CABLE BOSS-SC/SBOSS 485/245 BRACKETS BOSS-1054ELECTRONIC BALLAST BOSS-PSD248T12HOMVEMERGENCY BALLAST BOSS-BHD65UMAGNETIC BALLAST BOSS-631LHTCPHINGES BOSS-SH-13

ITEM PART ID #LATCHES BOSS-SL-1KEEPERS BOSS-SK-17483 LENSES IN FRAME BOSS-83-11483 LENSES IN FRAME w/HINGES BOSS-83-11H485 LENSES IN FRAME BOSS-85-11485 LENSES IN FRAME w/HINGES BOSS-85-11H243 LENSES IN FRAME BOSS-43-11243 LENSES IN FRAME w/HINGES BOSS-43-11H245 LENSES IN FRAME BOSS-45-11245 LENSES IN FRAME w/HINGES BOSS-45-11H

BOSS-483-2

BOSS-485-2

BOSS-80COR .........................cast open ringBOSS-86COR .........................cast open ringBOSS-86BU......................................bushing

BOSS-80BO................................rubber bootBOSS-96DC ............................cap and chainBOSS-96NG ...............................plate gasketBOSS-CG......................................cap gasket

5258CH ..............BOSS -96 Interior only (5-15R)5858-PS ..........BOSS -96-2 Interior only (6-20R)5358-PS ..........BOSS -96-3 Interior only (5-15R)

When you need power in tough weather or harsh climates, then the BOSS line of wiring devices is for you. Through heavy rain, snow & ice, orhowling dust storms, the BOSS Type 4 water-tite/weather-proof receptacles, plugs, and cord ends stand up to all of the abuse Mother Nature(and roughnecks) can throw at them. Cast aluminum bodies, caps, and rings combined with durable rubber boots and gaskets make this lineboth durable and reliable.

• Cast aluminum cap keeps out the elementsand debris when not in use.

• Same amperage/voltage interior (connectorbody) options as in BOSS 96.

• The threaded bushing on the BOSS 86 femalecord end accepts ring of BOSS 80 or theBOSS-DC cap and chain to keep out theelements and debris when not in use.

BOSS 86 (Female Cord End)

REPLACEMENT PARTS

• Cast open ring holds rubber boot and threads securelyto BOSS 96 receptacle or BOSS 86 cord end.

• High Quality rubber boot ensures water-tite seal.

BOSS 80 (Male Plug)

BOSS 96• Designed to fit any manufacturer’s

FS-style boxes.• Cast aluminum cap keeps out water, snow,

ice, and debris when not in use.• Durable chain keeps cap from

disappearing while receptacle is in use.• Available in different amperage/voltage

options to suit your applications.• 96PT comes with pigtails pre-wired for

quick installation.

BOSS-80BOSS-86

BOSS-96/PT

NEMA 5-1515A/125V

NEMA 6-2020A/250V

BOSS-80-2(use NEMA 6-15)

BOSS-80-4(pictured)

BOSS 86-2BOSS-96-2

T-Slot receptacle accepts15 or 20 amp 250V plug

BOSS-80-3BOSS-86-3BOSS-96-3

NEMA 5-20R15A or 20A/125V

T-Slot receptacle accepts15 or 20 amp 125V plug

BOSS 600 PANELSThis model of the BOSS Electrical Panel is rated up to600V. So for all of your power management needs, in480V or 600V, this is the panel for you. And withstandard sizes ranging between 18 to 48 circuits (6-16switches), and a host of options for panel or extension boxmounted receptacles, this panel can be customized to suitalmost any application. Talk to a sales representativeabout your specific needs and we will build you aBOSS Electrical Panel to meet them.

BOSS - 600VP - _______ - _______ - _______Enclosure Size Extension Box# of Breakers

* Customer also needs to provide a spec sheet with breaker size and arrangement, and details for the type, amperage, and placement of any receptacles.

• c/w MOUNTING BOLTS• FD OR QOU STYLE BREAKERS• MAKES MOUNTING EASY

(tapped holes)

HammondEnclosure Size

BreakerSize

ExtentionBoxReceptacles

# ofBreakers**

Amperage3K 3W

Interruption Rating @ 600VFDB FD HFDNumber

24X20X6

30X20X6

40X20X6

48X20X6

CUSTOM

E6

F6

SE0803877

SE0803876

#

6

8

12

16

#

100A

250A

250A

250A

#

14KA 18KA 25KA

15-255A

15-255A

15-255A

15-255A

#

0 - 6

0 - 8

0 -12

0 - 16

#

EXT

NO

Use for Model # Provide Specifications General Information

Ordering Information

BOSS PANEL HARDWARE

• CLEAR ON/OFF MARKINGS• LOCK-OUT TAB• O-RING SEAL [switch handle] • c/w MOUNTING BOLTS

Still need the flexibility of a door-mounted breaker? Need an add-on extension boxto mount receptacles for easy access? Got holes prepped you won’t be using yet?Then the BOSS Panel Hardware can solve all of your problems. The BOSS C-200series allows you to mount molded case (FD series) or unit mount (QOU series)breakers and maintain a NEMA 4 rating. Clearly marked ON/OFF eliminates anyconfusion in field service, and a lockout tab keeps everyone safe.And isn’t that what it’s all about?

BOSS -C-200A & C-200BBOSS -C-200FD& C-200QOU

BOSS 120/208V PANELS

BOSS - 120/208VP - ______ - ______ - _______Enclosure Size Extension Box# of Breakers

HammondEnclosure Size

ITEM CATALOG No.

BreakerSizes*

ExtentionBoxReceptacles*

Number ofBreakers**

Amperage3K 3W

Interruption RatingQOB 240VNumber

24X20X6

30X20X6

40X20X6

CUSTOM(see Hammond)

D6

E6

F6

#

6 or 8

10

14

#

100A

100A

225A

#

Use for Model #

10KA

10KA

10KA

#

15-100A

15-100A

15-100A

#

0 - 8

0 -10

0 -14

#

EXT

NO

Door-mount HardwareON Up/OFF downOFF Up/ON Down

Mounting Plate (FD)Mounting Plate (QOU)

GasketBOSS Angle Extension Box

20x12x6BOSS Blank Cover Plates:

30A (3.5” x 3.5” x 3/16”)60A or 100A (4.25”x4.25”x3/16”)

30A Gasket60-100A Gasket

BOSS-C200ABOSS-C-200BBOSS-C-200FDBOSS-C-200QOUBOSS-C-200GASKET

BOSS-C-2012EXT

BOSS-BC30BOSS-BC60/100BOSS-BCG30BOSS-BCG60/100

• 20” wide x 12” face x 6” deep[line dimensions]

• Mounting tabs match panel tabs(14-9/16” center-to center mounting tabs)

• Gasket cover c/w bolts• CUSTOMIZE RECEPTACLE PLACEMENT

• 30A or 60-100A sizes

EXAMPLE: BOSS-120/208VP-E6-10-EXT *Customer also must provide spec sheet for:• Sizing and arrangement of Breakers. • Number, Style/Amperage, and Placement of Receptacles

This model of the BOSS Electrical Panel is rated for120/208V. In typical rig configurations, this panel is perfectfor managing power for lighting and general duty outletsand equipment. It is the perfect solution for anysetting that requires a NEMA 4 panel. Customizethis with BOSS 96, Powertite or Arktitereceptacles, with or without an extension box,and you’ve got an incredibly convenient andflexible set up to suit any application.

Ordering Information

Provide Specifications General Information

**Interiors are typically 18, 24, 30, or 42 circuits. One breaker is alotted for each 3-circuit spacing to align with door-mounted switches. One switch/breaker for every 3 circuits.

BOSS -2012EXT

BOSS -BC &BCG

BOSS Electrical Panels are the next generation panel design in termsof safety, maintenance, and cost effectiveness. The innovative designof these custom panels is the mounting of the breakers on the backpan of the enclosure, different from the conventional door-mounting,all the while maintaining a NEMA 4 weatherproof rating with externallymounted switches. This eliminates the possibility of being exposed tolive wires when the panel door is open. It also eliminates the tediousand time-consuming task of mounting breakers individually on thedoor, as well as the wear and tear on the hardware. Unlike other door-mounted switches, the BOSS switches do not shift position when thedoor is open, ensuring the panel door opens and closes easily. Thecustom build options include: 120/208 – 480 – 600 voltages, size ofthe enclosure, number of breakers, and an almost unlimited number ofoptions on panel or extension box mounted receptacles (Arktite,Powertite in 30/60/100 amps, or BOSS 96s).

BOSS Electrical Panels are housed in the high-quality Hammond1418N4 series enclosures. In our standard panels, Square D bolt-onQOB (120/208) or Cutler Hammer (600V) molded case (FD style)breakers are used for their reliability. The BOSS buying power ensuresyou are paying the most competitive price possible. The BOSS shopalso builds a lot of panels. This means it is done right, and cost-effectively. CEC and NEC approvals are granted to these panels toassure that they meet the standards wherever they might be shipped.

EXTERIOR• NO MORE MOUNTING BREAKERS ON PANEL DOORS!

~ Plate actually strengthens the door.• PROTECTION from accidental swipes.• SAFETY from lock-out tabs.

~ Raised guard protects switches from accidental side contact. ~ Has holes for lock-out tabs for safety.

• CLEAR ON/OFF positions (bright red switch handles).• NEMA 4 Weatherproof Rating (water, spray, blown dust).• Custom labels clearly mark circuit designation.

BOSS ELECTRICAL PANELS (NEMA4)

INTERIOR• Bolt-on Breakers.• Panel trim protects user from exposed wires.• Clear numbering of circuits.• O-ring provides optimum weatherproof seal.

AND keeps switch handles in place when door is open.• New stops limit switch travel to ON/OFF—switch can’t spin out or snap breaker lever.