Vol II (ICAR Audi Interior 2013)

7/24/2019 Vol II (ICAR Audi Interior 2013)

1/50

INDIAN COUNCIL OF AGRICULTURAL

RESEARCH, NEW DELHI

TENDER AND CONTRACT DOCUMENT

Name of Work: Interior works including civil, electrical, acoustics etc. for

Auditorium at NASC Complex, Pusa, New Delhi.

TENDER NO.: RITES/CP/ICAR/Audi/Interior/2013

PART 2: FINANCIAL BID

August, 2013

(AGOVT.OFINDIAENTERPRISE)

RITESLIMITED

RITESBHAWANIIPLOTNO.144

SECTOR44Gurgaon122003,india

Tel(0124)2728305,fax(0124)2728371


2/50

B SUB TOTAL OF ELECTRICAL WORKS (B)

GRAND TOTAL (A + B)

UNCONDITIONAL REBATE(IF ANY)

TOTAL OF ALL SCHEDULES

AFTER APPLYING REBATE

(RUPEES)

(i) In figures

(ii) In words.

i) SIGNATURE OF AUTHORIZED SIGNATORY OF TENDERER

ii) NAME OF SIGNATORY

iii) NAME AND SEAL OF TENDERER

iv) DATE

A SUB TOTAL OF CIVIL WORKS:

PART -II

FINANCIAL BID

SCHEDULE (BILL) OF QUANTITIES

Name of Work: Interior works including civil, electrical, acoustics etc. for Auditorium atNASC Complex, Pusa, New Delhi.

SUMMARY

S. NO. Description Amount (in fig) Amount (in words)


3/50

S.N. DESCRIPTION OF ITEM UNIT QTY AMOUNT in figu

(Rs.)

in figures in words

1.00 FLOORING

Note:

Wastage will not be payable extra in any of items.

Measurement of finished portion will be taken for

a ment.

Granite Flooring

1.01 Providing and laying 18 mm thick mirror finished

granite stone flooring, machine cut in required

size, approved shade, color and texture laid using

white cement slurry over 20 mm (average) thick

base of cement mortar 1:4 (1 cement : 4 coarse

sand) followed by laying, fixing and jointed with

white cement slurry mixed with matching pigment,

including rubbing and curing moulding and

polishing to edge to give high gloss finish etc

complete at all levels.(as approved)

1.01.1 Granite Type-A with Basic Rate 195/- sft FOR site Sqm. 2,342.00

1.01.2 Granite Type-B with Basic Rate 170/- sft FOR site Sqm. 586.00

1.02 Providing and fixing 18mm thick gang saw cut

mirror polished (premoulded and prepolished)

machine cut in risers of steps, skirting, dado and

pillars of approved shade, color and texture (as

approved) laid on 12 mm (average) thick cement

mortar 1:3 (1 cement 3 coarse sand) with joints

treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing,

curing moulding and polishing to edge, if required

to give high gloss finish etc. complete at all levels

and as per direction of E-I-C.

1.02.1 Granite Type-A with Basic Rate 195/- sft FOR site Sqm. 953.00

1.02.2 Granite Type-B with Basic Rate 170/- sft FOR site Sqm. 238.00

Italian Marble Flooring, Skirting & Dado

1.03 Providing and fixing Italian marble in flooring,

skirting, wall dado etc as approved using 18mm

thick gang saw machine cut stone at all levels, of

required size & pattern and of approved shade,

color and texture laid using white cement slurry

over 20 mm thick base of cement mortar 1:4 (1

cement : 4 coarse sand) followed by laying, fixing

and jointing with white cement slurry mixed withmatching pigment, including rubbing, curing,

polishing, making mouldings of approved profile

and polishing of mouldings and edges to give high

gloss finish etc, complete at all levels and as per

direction of E-I-C.

1.03.1 Italian Marble Type-A (Light Emperador), Type-B

(Bottochino) & Type-C (Spanish Grey) in flooring

with Basic Rate Upto 250/- sft FOR site

Sqm. 1,343.00

BILL OF QUANTITIES

RATE (in Rs.)

NAME OF WORK:Interior works including civil, electrical, acoustics etc. for Auditorium at NASC Complex, Pusa, New Delhi


4/50


(Rs.)

in figures in words

RATE (in Rs.)

1.03.2 Italian Marble Type-D (Dark Emperador), Type-E

(Perlato Sicilia) & Type-F (Grey William) in floor

with basic rate Upto Rs.340/- sft FOR Site

Sqm. 576.00

1.03.3 Italian Marble Type-A (Light Emperador), Type-B

(Bottochino) & Type-C (Spanish Grey) indado/wall with Basic Rate Upto 250/- sft FOR site

Sqm. 218.00

1.03.4 Italian Marble Type-D (Dark Emperador), Type-E

(Perlato Sicilia) & Type-F (Grey William) in

dado/wall with Basic Rate Upto 340/- sft FOR

site.

Sqm. 24.00

Composite/Engineered Marble Stone Counters

1.04 Providing and fixing 20 mm thick gang saw cut

mirror polished (premoulded and prepolished)

machine cut Composite/Engineered marble stone

for kitchen platforms, vanity counters ,window

sills, facias, skirting and similar locations ofrequired size of approved shade, color and texture

(as per approved sample) including laying by

using white cement slurry laid over 20mm thick

base of cement mortar 1:4 (1 cement : 4 coarse

sand) followed by all side joints treated with white

cement, mixed with matching pigment, epoxy

touch ups, including rubbing, curing, making

moulding and polishing to edge to give high gloss

finish etc. complete at all levels and as per

direction of E-I-C.

1.04.1 Composite Marble Type-A Sqm. 212.00

1.04.2 Composite Marble Type-B Sqm. 95.00

1.04.3 Composite Marble Type-C Sqm. 95.00

Vitrified & Ceramic Tile work

1.05 Providing and laying anti skid Ceramic floor tiles

600 x 600mm of minimum 9 mm thickness of 1st

quality of approved make in all colors, shades as

approved laid on 20mm thick cement mortar 1:4

(1 cement:4 coarse sand) fixed with "+" shaped 2

mm wide plastic spacers at corners (to be removed

before jointing) to achieve a perfectly straight joint

line, and jointed with Laticrete or approved

equivalent jointing compound of matching shade

complete as per direction of E-I-C.

Sqm. 868.00

1.06 Providing and laying vitrified floor tiles in

different sizes (thickness to be specified by the

manufacturer) with water absorption less than

0.08% and conforming to IS : 15622, of approved

make, in all colors and shades, laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand),

including grouting the joints with white cement

and matching pigments etc., complete & as per

- -1.06.1 Size of Tile 600x600 mm Sqm. 390.00


5/50


(Rs.)

in figures in words

RATE (in Rs.)

1.06.2 Extra for using "+" shaped 2 mm wide plastic

spacers at corners (to be removed before jointing)

during fixing of Vitrified tile in floor to achieve a

perfectly straight joint line, and jointed with

Laticrete or approved equivalent jointing

compound of matching shade in place of white

cement with matching pigment all complete as per - -

Sqm. 390.00

Wooden flooring

1.07 Providing and fixing minimum 11mm thick AC VI

grade laminated wooden flooring suitable for

commercial-heavy use areas like auditorium

application of approved make, shade and pattern.

The top surface shall have a 0.60 mm thick multi

layer high pressure laminate fixed over moisture

resistant high density fiberboard substrate. The

planks shall be of size 1200 mm x 200/125 mm.

The flooring shall confirm to EN 438, EN 717-1,

EN 13501-1, EN-1815, JIS Z 2801:2000

standards. The planks shall be placed on an

underlay of 0.2 mm thick alkali resistantPolyethylene sheet having density 920-935 kg/ m3

to resist moisture from the sub floor and to secure

the floor installation etc all complete. (Skirting

profiles, trims etc shall be included & not paid

extra) as per direction of E-I-C.

Sqm. 407.00

1.08 Providing and fixing 2090x205x30 mm thick

Activity plank flooring jointed with tongue and

groove joint having tensile strength of not less than

10 kg/sqm. Top layer consisting of woodloc (15

mm thick) supported on 6 mm HDF support

element & base of 9 mm thick foam

polytherne/polyether resilience element. Surface to

be treated with pre-lacquered with UV-curedpolyurethene/acrylic based lacquer free from

solvent & formaldehyde. Base of the floor consists

of two layers of 12mm thick water proof marine

ply, plywood bonded with phenolic resin with half

headless GI nails/steel screws wherever necessary,

with joints staggered with 2nd layer glued and

screwed to the first, fixed with wooden screws to

teakwood joists framework comprising 75x50mm

teakwood joist 900mm C/C in one direction and

50x50mm teak wood battens 400mm C/C on other

direction, teakwood joists resiliently supported on

150 x 150mm pads of 7.5mm nominal thickness of

waffle, neoprene pad ribbed (50 p.s.i. grade) and

50x50x6mm thick MS angle cleat fixed with

150mm long with 10mm dia GI bolts andexpansion fasteners, over floor slab at 900 x 900

Sqm. 341.00

Support locations including providing and

applying a coat of ready mixed aluminum primer

and a coat of synthetic enamel paint both of

approved brand and manufacturer over exposed

surfaces and edges of marine ply. The item

includes providing and fixing 145x50 mm

teakwood moulding as approved on the edges of

stage wooden flooring. Entire work shall be done

complete as per drawings, specifications and

directions of E-I-C. (Note : All teakwood shall be

certified kiln seasoned and treated against


6/50


(Rs.)

in figures in words

RATE (in Rs.)

1.09 Providing & laying at site finished Bamboo

flooring (coffee shade) of approved make, color,

shade & finish of minimum 12 mm thickness and

of minimum size 960mm x 96 mm. The material

shall fulfill the following standards : Flammability

as per ASTM-E648 with Class-1 rating as per

NFPA, Smoke density as per ASTM-E622 shall be

less than 450 for flaming or non flaming mode,

compressive strength as per ASTM-D3501-86A

shall not be less than 52 MPa parallel to grain, 17

MPa perpendicular to grain & 116 MPa flat at

50% strain. Tensile strength as per ASTM-D3500-

90 shall not be less than 105 MPa parallel to grain,

Slip resistance coefficient of friction as per ASTM

D2047 shall be 0.71, Abrasion resistance weight

loss as per ASTM-C501 shall not be more than

350 gms (H-22 calibrated wheels loaded with 1000

gms weight at 70 RPM for 1000 cycles) and

Moisture content as per ASTM-D4442 oven dry

method shall not be more than 7.8%. (Skirting

profiles, trims etc shall be included & not paid

extra)

Sqm 272.00

Broadloom Carpet Flooring Type-A

1.10 Providing and fixing Carpet Flooring using

Broadloom (Roll type) carpet of approved make,

shade and pattern and of the following

specification: Tufted cut pile, 1/10 gauge with

100% Polyamide Millitron/ 6 Crealon (R) nylon/

SD Nylon pile or equivalent material having

minimum surface pile thickness of 5.3 mm and

minimum total thickness of 7.1 mm with Contract

Latex backing/ 'Weave back (R) backing/ Woven

Polypropylene backing, min. tufts of 201500 per

sqm and minimum total carpet weight of 2300

g/sqm, minimum pile yarn weight of 1200 g/sqm,

minimum surface pile density of 0.141 g/ cucm

having inbuilt anti-soiling protection, suitable for

commercial-heavy use areas like auditorium

application, having acoustical insulation value of

31 dB, CE labeled, EC certified, fulfilling Fire

Classifications EN 13501-1 euro class and

approved by Green Label Plus test for indoor

hygiene in standard length and width.

Sqm. 2,023.00

Tiled Carpet flooring Type-B

1.11 Providing and fixing Carpet flooring using CarpetTile of approved make, shade and pattern and of

the following specification: Loop pile carpet tile,

5/64 gauge of size 500 mm x 500 mm/ 610 mm x

610 mm with Minituft loop construction, 100%

Econyl Aquafil pile material/ Zeftron (R) yarn,

100% recycled solution dyed Nylon or equivalent

having minimum pile height of 0.8mm and

maximum total height of 6.5mm with secondary

backing of Back to Back modified bitumen,

Sqm. 732.00


7/50


(Rs.)

in figures in words

RATE (in Rs.)

enhanced with a thermoplastic elastomer,

reinforced with a glass fiber fleece covered with

100% PES fleece including 10% recycled content/

non woven primary backing and secondary

backing of Nexterra (R) with min. 40% total

recycled content, minimum tuft density 190,000 /

sqm, minimum total carpet weight of 3,350 g/sqm, minimum pile weight of 480 g/ sqm, pile

above backing of minimum 176 g/ sqm, minimum

pile density of 0.220 g/ cucm, having minimum

impact noise rating of 10 dB suitable for

continuous use of castor wheel chairs as per EN

985 and fire resistance property as per EN 13501-1

and permanent anti-static 2 kV/ DOC FF-1-70,

static control


8/50


(Rs.)

in figures in words

RATE (in Rs.)

2.01 Providing & applying Plaster of Paris (gypsum

anhydrous) suspended false ceiling up to any

height above floor level, including fixing of frame

work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of

120 gms/sqm (both side inclusive). Consisting of

angle cleats of size 25 mm wide x 1.6 mm thickwith flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling

with dash fastener 12.5 mm dia x 50mm long with

6mm dia bolts. Other flange of cleat fixed to the

angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size. The other

end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of

1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm each having lips of

10.5 mm, at 450 mm centre to centre.

This shall be fixed in a direction perpendicular to

G.I. intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long G.I. wire

at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges

of 20 mm and 30 mm long, the perimeter of

ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval and reinforced with

rabbit wire mesh of 100mmx16mm gauge fixed to

2.01.1 Flat surfaces Sqm. 1,180.00

2.01.2 Curved surfaces Sqm. 128.00

Gypsum Board False Ceiling2.02 Providing and fixing false ceiling at all height

including providing and fixing of frame work

made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6

mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed to the

ceiling with dash fastener 12.5 mm dia x 50mm

long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size

and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running

at the spacing of 1200 mm centre to centre, towhich the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm

each having lips of 10.5 mm, at 450 mm centre to

centre.

(Nothing extra shall be paid for openings for

grilles, electrical fixtures etc. and vertical/inclined

face shall be measured above 200mm high only).

2.02.1 12.5 mm thick tapered edge gypsum fire resistant

board conformin to IS: 2095- Part I

Sqm. 1,015.00


9/50


(Rs.)

in figures in words

RATE (in Rs.)

2.02.2 12.5 mm thick tapered edge gypsum moisture

resistant board.

Sqm. 85.00

2.02.3 Specification same as above but for providing &

fixing of 25mm (2 layers of 12.5mm) Gypsum

board (moisture resistant) fixed on galvanized steel

framework. All framework suspension system asper manufacturer specification as required to

withstand the load. The parimeter channel to be

screw fixed to brick/concrete wall with rawl plugs

and screws. The lower level of Gypsum board to

have joints over frame and to be fixed at max.

300mm c/c, to the frame and second layer have

staggered joints and to be fixed to the first layer.

All joints to be taped with paper tape and filled

with jointing compound to provide smooth

surface, Entire work to be done as per

specifications including painting two coats of

primer and as per directions of E-I-C.

Sqm. 4,953.00

2.02.4 Extra for fixing Gypsum Board False Ceiling in

Zigzag Profile (As per Drawing in Auditorium

area

Sqm. 2,129.00

2.02.5 Fully Perforated Gypsum Plaster Board of size

1200 x 2400x12.5 mm having approx. 15 %

perforated area with perforation size and pattern as

approved and as per manufacturer's specification,

with all 4 side tapered and backed by acoustical

tissue with NRC value not less than 0.60

Sqm 1,428.00

2.02.6 Providing & fixing thermal insulation of ceiling

with Resin Bonded Fiber glass wool conforming to

IS : 8183, density 24kg / m3, 50mm thick,

wrapped in 200 gms virgin polythene bags/jute

bags, fixed to ceiling with metallic cleats

(50x50x3 mm) @ 60 cm and wire mesh of 12.5

mm x 24 gauge wire mesh. (above gypsum board

Sqm 2,170.00

2.03 Providing and fixing tiled false ceiling of approved

materials of size 595x595 mm in true horizontal

level, suspended on inter locking metal grid of hot

dipped galvanized steel sections (galvanized @

120 grams/sqm, both side inclusive) consisting of

main "T" runner with suitably spaced joints to get

required length and of size 24x38 mm made from

0.30 mm thick (minimum) sheet, spaced at 1200

mm center to center and cross "T" of size 24x25

mm made of 0.30 mm thick (minimum)sheet,

1200 mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600

mm and secondary cross "T" of length 600 mm

and size 24x25 mm made of 0.30 mm thick

(minimum) sheet to be interlocked at middle of the

1200x600 mm panel to form grids of 600x600 mm

and wall angle of size 24x24x0.3 mm and


10/50


(Rs.)

in figures in words

RATE (in Rs.)

laying false ceiling tiles of approved texture in the

grid including, required cutting/making, opening

for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc. Main "T" runners to

be suspended from ceiling using GI slotted cleats

of size 27 x 37 x 25 x1.6 mm fixed to ceiling with

12.5 mm dia and 50 mm long dash fasteners, 4mmGI adjustable rods with galvanised butterfly level

clips of size 85 x 30 x 0.8 mm spaced at 1200 mm

center to center along main T, bottom exposed

width of 24 mm of all T-sections shall be pre-

painted with polyester paint, all complete for all

heights as per specifications, drawings and as

directed by Engineer-in-charge.

2.03.1 12.5 mm thick square edge PVC Laminated

Gypsum Tile of size 595x595 mm, made of

Gypsum plasterboard, manufactured from natural

gypsum as per IS 2095 part I and laminated with

white 0.16mm thick fire retardant PVC film on the

face side and 12micron metalized polyester on the

back side with all edges sealed with the face sidePVC film which goes around and wraps the edges

and is bonded to the edges and the back side

metalized polyester film so as to make the tile a

completely sealed unit.

Sqm. 687.00

2.04 Acoustic Ceiling Tiles

2.04.1 Providing and Fixing Acoustic tiles of 15 mm

thickness and tegular edge, easily demountable

tile, manufactured from High density glass wool,

with the visible surface batch painted glass tissue

in white and the back of the tile should be

covered with glass tissue. The glass wool core of

the tiles should be tested and classified as non-

combustible according to prEN ISO 1182. Thesystem should have Sound Absorption NRC value

of 0.9 (according to ASTM C 423). Tiles should

withstand a permanent ambient RH Upto 95% at

30*C without sagging, warping or delaminating

(ISO 4611). The light reflectance of the tiles

should not be less than 83%. Tiles certified by the

indoor climate labeling and recommended by

Swedish asthama and allergy association and

granted Nordic Swan ecolabel and fully

recyclable. The glass wool core of the tiles should

be tested and classified as non combustible

according to EN ISO 1182 and the ceilings should

fall under Class A2 s1 d0 according to EN 13501

1.

Sqm. 837.00


11/50


(Rs.)

in figures in words

RATE (in Rs.)

2.04.2 Providing and Fixing Acoustic tiles of 20 mm

thickness natural square edge, easily demountable

tile, manufactured from High density glass wool,

with the visible surface is a matt blackbatch

painted glass tissue and the back of the ti le should

be covered with glass tissue. The glass wool core

of the tiles should be tested and classified as noncombustible according to prEN ISO 1182. The

system should have Sound Absorption NRC value

of 0.9 (according to EN ISO 11654). Tiles should

withstand a permanent ambient RH Upto 95% at

30*C without sagging, warping or

delaminating (ISO 4611). The light reflectance of

the tiles should not be more than 3- 4 %.

Sqm. 259.00

Wooden False Ceiling

2.05 Providing and Fixing Wooden false Ceiling

comprising of a Galvanized MS frame as required

covered with 12 mm thick Marine ply, followed by

6 mm premium quality MDF for making groove

and finished with a natural veneer (as approved) of

3.5 mm thickness duly Spirit polished with

melamine matt coating. The ceiling shall be fixed

to the roof soffit with adequate suspenders. The

item shall be inclusive of cutting & making

cutouts for lights, diffusers etc all complete.

(veneer with basic cost Upto Rs:100 per sft FOR

site)

Sqm. 405.00

Perforated Metallic ceiling Type-B: Clip in Tile

2.06 Providing & installing Clip in tiles/plank ceiling

made out of Aluminum. The ceiling tiles shall bein size of 600x600x0.7mm (thk), perforated to L15

pattern (2.5mm diameter holes, 16% opening) with

Soundtex Tissue laminated at the back, beveled

edges on 4 sides, clipped into secondary clip in

profiles at 600mm c/c. The clip-in profiles shall be

cross connected to C-channel primary through

threaded rod hangers spaced at 1200mm c/c.

Finish of ceiling tiles:RAL 9016 white polyester

powder coat finish with minimum 60 microns

paint thickness or as approved.

Sqm. 634.00

2.07 LINEAR BAFFLE CEILING

Providing & installation of approved quality

vertical linear baffle ceiling made out of folded

Aluminum. The baffle units shall be in size of

50mm (W) x 150mm (H) and 1000mm x 4500mm

x 1mm (thk), non-perforated. The ceiling baffle

units shall be installed at a distance of 300mm c/c

in one direction. The baffle units shall be attached

to C-channel carriers spaced at 1200mm c/c. The

C-channel carriers shall then be cross connected to

perforated L-angle primary grid and suspended

with M6 threaded rod hangers spaced at 1200mm


12/50


(Rs.)

in figures in words

RATE (in Rs.)

2.07.1 Baffles finished with RAL 9016 selected wood

grain with minimum 60 microns paint thickness.

Sqm. 298.00

2.07.2 Baffle finished with RAL 9016 polyester powder

coat with minimum 60 microns paint thickness.

Sqm. 444.00

2.08 WOODEN PLANK CEILING (NON-

PERFORATED & PERFORATED)

2.08.1 Providing & installing of approved quality timber

effect Ceiling Highlighter panels hook-on ceiling

made out of fire rated MDF core material. The

ceiling panels shall be in size of 600x1200x16mm

thk (Non Perforated panels surfacesPanels and

support grids to be used as a proprietary system

from a single source manufacturer and shall be

produced in accordance to metal ceiling industry

standard TAIM (Technical Working Group of

Industrial Metal Ceiling Manufacturers). Panels

tolerances shall be according to +/- 2.0mm on

width and length of panels. Panels deflection shall

be allowable up to L/360.surface. The ceiling

planks shall be with square edges on 4 sides,

hooked along the length . The hook on profiles

shall then be cross connected to perforated L-

angle primary grid and suspended with M6

threaded rod hangers spaced 1200mm C/C. Finish

of ceiling panels shall be Timber effect melamine

wooden finish.

Sqm. 20.00

2.08.2 Providing and installation of timber effect

melamine finish hook-on ceiling made out of fire

rated MDF core material. The ceiling panels shall

be in size of 600x1200x16mm (thk), perforated

to 3mm diameter holes, 16mm c.c at front &

10mm dia holes @ 16mm C/C at the back. There

will be a layer of Soundtex tissue laminated at the

back of ceiling panels. The ceiling planks shall be

with square edges on 4 sides, hooked along the

length . The hook on profiles are then cross

connected to perforated L- angle primary grid and

suspended with M6 threaded rod hangers spaced

1200mm C/C complete with all arrangement and

as per direction of E-I-C. Finishes of ceiling

panels: Timber effect Melamine finish.

Sqm. 10.00

MICRO-PERFORATED METAL CEILING

TYPE-A: 2D CEILING


13/50


(Rs.)

in figures in words

RATE (in Rs.)

2.09 Providing & Installation of Metal Ceiling micro-

perforated with fleece backing. The ceiling panels

shall be in customized sizes to provide 2D effect,

micro- perforated with Soundtex acoustic fleece

L15 pattern (1.5mm diameter holes, 22% opening

approx). The ceiling planks shall be with square

edges on 4 sides, hook onto secondary hook onprofiles. The hook on profiles are then cross

connected to perforated L-angle primary grid and

suspended with M6 threaded rod hangers spaced

1200mm C/C. and providing and laying 50mm

thick resin bonded glass wool (24 kg /m3) over

perforated ceiling planks.

Finishes of ceiling tiles/ planks: RAL 9016 white

polyester powder coat finish with minimum 60

microns paint thickness or as approved and as per

dirction of E-I-C.

Sqm. 755.00

OPEN CELL CEILING

2.10 Providing and installation of approved quality

linear cell ceiling made out of 0.5 mm thick

Aluminum. The assembled cell ceiling panels shall

be made out of main blades in 15mm (W) x 40mm

(H) in 1200mm (L), installed at 200 mm c/c. and

cross connected to secondary blades in 15mm(W)

x 40mm(H) in 600mm(L) with 100 mm pitch. The

assembled cell ceiling panels shall be clipped into

U-94 carriers in GMS, pre-coated in black

enameled finished at 1200mm c/c. Wire clips shall

hold the cell ceiling panels into the U-94 carriers.

The Primary angles made out of GMS, type U1040

are cross connected to the U-94 carriers at

1200mm c/c., for lateral bracing the whole ceiling

shall be suspended by M6 threaded rods. All panelmodules must be hinge able through wire clips &

grid should not be visible from bottom. Black

soundex tissue to be pasted at the back of the

panels to block visibility of internal service piping

installed on ceiling.

Finish of cell ceiling panels: Metallic silver in

RAL 9006/White in RAL 9016/Natural Aluminum

finish (Black or as approved). including Providing

and installation of 50mm thick resin bonded glass

wool (24 kg/cum)with GI frame fixed on roof slab

with frame held on 24G x 10 GI wire mesh

covered with black jute fabric over open Cell

Metal Ceiling.

Sqm 2,236.00

STEEL WIRE ROPE HANGERS &

SUPPORTS:

2.11 Supply, Fabrication, installation and testing of all

false ceiling with Wire Rope Hangers & Supports

complete with end fixing in accordance with the

approved shop drawings and as required by the

specifications.

2.11.1 Taking working load Upto 45 kg Nos 2,167.00

2.11.2 Taking working load 46 to 90 kg Nos 271.00


14/50


(Rs.)

in figures in words

RATE (in Rs.)

2.11.3 Taking working load 91 to 225 kg Nos 271.00

3.00 SPECIALIZED ITEMS

3.01 SLIDING FOLDING PARTITION

3.01.1 Sound Barrier Partition above Operable

Sliding/Folding Partition (Audi (S.F.),

Multipurpose Dining (G.F.) and Training Rooms

G.F.

Sqm 468.00

Providing and fixing to the required profile and

shape 2 layers of 12.5mm thick Gypsum board (on

both sides of barrier) on GI framework comprising

40x40x18G tubular frame painted with red oxide

anti corrosion paint 610x610mm centre to centre

fixed on Roof Structure with 40x40x5 MS

galvanised cleat, 100mm long 1200 c/c and ceiling

framework with welded connections. The Gypsum

board (on both sides of barrier) to be backed with

50mm thick resin bonded fiber glass insulation (24kg/cum) cut to size and inserted in GI framework

and held in place with 28G x 12mm GI wire

netting. The first layer of Gypsum board to have

joints over frame and second layer of Gypsum

board to have joint staggered with respect to the

first layer, all joints between board in both layers

to be taped with paper tape and filled with sealing

compound.

Gypsum board layer to be sealed at junction with

Roof sheeting/ structure and false ceiling below

with the non-hardening mastic compound, so as to

provide smooth surface. Entire work to be done as

per drawing, specifications and directions as perE

I-C.

3.01.2 Operable Acoustic Partitions (Type 1)- Audi

(S.F.), Multipurpose Dining (G.F.) (One side

perforated) with openable and foldable doors

alongwith complete arrangement and fittings

required and as per the drawings.


15/50


(Rs.)

in figures in words

RATE (in Rs.)

Supply and installation of operable acoustical

partitions in designated area comprising individual

panels100mm thick and maximum 1200mm wide

Panels shall be of all steel construction and shall

fully enclose and protect all edges of surface

material with protective edge trim. Panel skins

shall be Steel class A rated as per ASTM E84laminated to steel structure and acoustical backing,

mounted in full aluminium profile perimeter

protective frames, Panels shall have one face

perforated with 33% open perforated steel and

underlay sound control blanket and septum

providing 0.65 NRC. Vertical sound seals between

panels shall be tounge and groove configuration

incorporating vinyl acoustical seals Panel weight

shall not exceed 55 kg/sqm. Panels shall be

suspended from roll-formed steel track system

suspended from steel supports by threaded rods.

Each panel shall be top supported by two trolley

assemblies comprising steel ball bearing wheels.

Partitions to be complete, finished with fire

retardant fabric in both side num finish (Black oras a

Panels shall have operable top and bottom seals

simultaneously operated by a removable handle.

The seals shall not contact floor or track during

movement of panels. Panels shall also feature

horizontal seals for stabilization and acoustic

performance. Final partition closure to be

accomplished by lever closure panel of same

construction as basic panel but provided with an

expanding jamb operated by a removable handle.

The partition shall have been tested by an

independent acoustical laboratory and shall have

weighted SRI (Rw) of at least 51 in accordance

with ASTM E90/DIN 52210. After installation,

operable partition shall be tested by manufacturer

in presence of client's representative and

consultant. Noise reduction measurements shall be

made in accordance with ASTM E336. NIC shall

be calculated as per ASTM E413. Noise reduction

shall meet NIC 51. Entire work to be done


direction of E-I-C

3.01.2.1 Operable Acoustic Partitions (Type 1)- One side

perforated with Automatic seal for Audi (S.F.)

with i/c fittings & openable and foldable doors


required and as per drawings.

Sqm 456.00

3.01.2.2 Operable Acoustic Partitions (Type 1)- One side

perforated with Automatic seal for Multipurpose

Dining (G.F.) with openable and foldable doors


required and as per the drawing.

Sqm 141.00


16/50


(Rs.)

in figures in words

RATE (in Rs.)

3.01.3 Operable Acoustic Partitions (Type 2)

Training rooms (G.F.) (Without perforation) with

openable and foldable doors alongwith complete

arrangement and fittings required and as per the

drawing.

Sqm 165.00

Supply and installation of operable acousticalpartitions in designated area comprising individual

panels 100mm thick and maximum 1200mm wide

Panels shall be of all Steel construction and shall

fully enclose and protect all edges of surface

material with protective edge trim. Panel skins

shall be of MDF Board (good quality Exterior

Grade) laminated to steel structure and acoustical

backing, mounted in full aluminium profile

perimeter protective frames. Vertical sound seals

between panels shall be tounge and groove

configuration incorporating vinyl acoustical seals

Panel weight shall not exceed 55 kg/sqm. Panels

shall be suspended from roll-formed steel track

system suspended from steel supports by threaded

rods. Each panel shall be top supported by twotrolley assemblies comprising steel ball bearing

wheels. Partitions to be complete with Veneer in

both sides as per approved sample (with a base

rate of Rs. 200 Per Sqft).

Panels shall have operable top and bottom seals

simultaneously operated by a removable handle.

The seals shall not contact floor or track during

movement of panels. Panels shall also feature

horizontal seals for stabilization and acoustic

performance. Final partition closure to be

accomplished by lever closure panel of same

construction as basic panel but provided with an

expanding jamb operated by a removable handle.

The partition shall have been tested by an

independent acoustical laboratory and shall have

weighted SRI (Rw) of at least 51 in accordance

with ASTM E90/DIN 52210. After installation,

operable partition shall be tested by manufacturer

in presence of clients representative and

consultant. Noise reduction measurements shall be

made in accordance with ASTM E336. NIC shall

be calculated as per ASTM E413. Noise reduction

shall meet NIC 51. Entire work to be done


direction of E-I-C.

3.02 SS HANDRAIL


17/50


(Rs.)

in figures in words

RATE (in Rs.)

3.02.1 Supply and installation of modular and component

(Weld free) based system of satin finish stainless

steel AISI 304 SS handrail and balustrade system

having minimum 38mm dia tube handrail (1.5mm

thickness) (app weight 1.5 kgs per Rmt) handrail

connected with unified stem keys in bead blasted

finish to 12X54 mm stain free finish solid (approxweight 7.5 to 7.7 Kgs) flat vertical member to be

fixed on the side of staircase (2-point fixed) with

circular solid bosses of 50 mm dia at max c/c

distance of 1800 mm with anchor fasteners to the

wall having infill of minimum 10 mm thick

toughened glass complete with all necessary bends

and termination. Ht. 900-1000 mm. System as per

tested and recommended by BS certification of BS

6180:1995 from British Standard Institute and as

per MTC. Rate for the complete unit is payable in

running meter and includes Handrail Tube,

Uprights Solid, unified Cherry/Maple key,

Toughened glass etc, including installation and

making good the floors if required as per direction

of E-I-C.

Rmt 102.00

3.03 WATER CURTAIN: Nos 2.00

Providing & installation of water curtain as per the

specification mentioned below including material

as listed below. Job includes preparation of Shop

Drawing & installation etc all complete:

Inclusions:

NOZZLES: Supply of 304 Gr Stainless Steel

manifold having 130 nos brass spray nozzles

(MOC GM/Brass) complete with bottom tieing

support, clear strings as required. (1 No for each

fountainLIGHTS

a) Supply of 24V DC, 5x1 W LED linear light,

(WW)color under water luminary with wide beam

super magnifying lense (MOC Al) Protection

Index IP 68. (7 No for each fountain)

b) Supply of ABS Casing for 5 X 1 W LED Lights.

(7 No for each fountain)

c) Supply of Waterproof joints. (7 No for each

fountain)

d) Supply of constant voltage LED driver input

AC 220-250 volts, output 24 V DC. (1 No for each

fountain

PUMPS: Supply of prefilter basket pump set

delivering. Body made in glass loadedpolypropylene, impeller in PPO, mounting seal in

glass loaded polyamide, motor shaft in stainless

steel AISI 420, mechanical seal in graphite and

steatite, motor housing in AL L 2521, protection

index IP 55, single phase built in thermal

rotection 1 no for each fountainDOSING PUMP UNIT: Supply of online

Chlorine Dosing injector with mechanical

connections complete as required. (1 no for each

fountain .MULTI MEDIA SAND FILTER


18/50


(Rs.)

in figures in words

RATE (in Rs.)

a) Providing of FRP pressure High rate Sand

Filter for filtration of suspended material from

water body complete with six position multiport

valve for filter,backwash,rinse,waste ,recirculate

and close all flow to pool the filter body

manufactures in fiber glass with uV .resistance

surface provided with oil pressure gauge cap 19.5cum/hr, 700 mm dia filter pressure 2.5 Kg/sqcm.

b) Supply of Silica sand for filter with

granulometry between 0.4-0.8 mm. (210 kg (app)

for each fountain)

ELECTRICAL CONTROL PANEL:Supply of

Cubical Control Panel made of 16 gauge CRC

sheet powder coated with Starter, Single phase

prevention, MCB, TP MCB's, Protection circuits

etc and space for CVD for the lights. (1 Set for

each fountainu PVC PIPING: Providing and fixing uPVC

pipes (10kg. Pressure) including accessories &

fittings as required (Elbow, MTA, End cap,

Socket, Tee, Reducing Tee etc.) (1complete job foreach fountain)

SUPPLY OF BALL VALVES WITH

FITTINGS AS REQUIRED.

a) Supply of Anti vortex complete as required.

(1no for each fountain)

b) Supply of 63 mm dia uPVC ball valves. (3 no

for each fountain)

c) Supply of 50 mm dia Gun Metal Non Return

Valve. (1no for each fountain)

CABLE & CONDUITING: Supply of double

sheated cables of various sizes including

accessories etc required (PVC Conduit, PVC

Bend, Steel wire, etc.) for final equipment

connections with control anel.a) Three Core copper double sheated submersible

cable(Motors) with conduit. (1 complete job for

each fountain)

b) Wire 1.5mm Three Core round flexible sheathed

insulated( Lights) (1 complete job for each

fountain

3.04 Retractable Seating Nos 384.00

Providing & installation of retractable seating

system with the specification as mentioned below:

Maximum Hall multifunctionally automatic

system based on retractable risers with folding &

unfolding mechanism. Telescopic risers ensures

optimal sight from any position. Electric traction

mechanism & pneumatic seat folding & unfoldingsystem. Safety equipped with a device that blocks

the movement of riser if there are obstracles in

their run. Maintanence & durability: Chairs are

protected against all external agents when not in

use. & simultaneous configuration of risers &

access stairs protects the risers also. Depending

upon the type of chairs used the riser height can

vary between 320 to 450 mm.


19/50


(Rs.)

in figures in words

RATE (in Rs.)

Chairs have center to center dimension of 500

mm, Beam mounted 3 to 4 chairs, 150 mm upright

position profile, upholstry system consisting of a

single block with internal structure & inherent fire

retardant fabric & foam Ergonomic & keep shape

single block covered with easily changeble zip-ion

upholstery. Soft system, silent cushinoned tip upsystem for seat, backrest & armrest prevents any

bump or annoying sounds. maintanence free

gravity folding mechanism & product should

comply with international fire regulation.The

seating should be as per the drawing and complete

drawing alongwith the details is to be provided

and get approved by E-I-C for complete

functionary of the system.The rate should include

complete system installation and all statutory

application taxes warranty tests etc.

4.00 WALL FINISHES

Note:

1) All unprotected surfaces of wood, MDF, Ply etc.

shall be treated with anti-termite paint, fire

retardant moisture resistant & black Japan

protective paint coatings.

2) All wood work shall be dry and moisture

content should be within permissible limit.

4.01 Providing & applying 4 mm thick (avg) P.O.P.

punning (calcium sulphate semi-hydrate variety)

over old / new wall surface by hacking of the

existing surface for proper bond including

rounding and chamfering of corners and junctions

and providing and fixing M.S. angle beading atcorners wherever required to give a smooth surface

true in line and plumb including making grooves

as per design. This item includes scaffolding,

protection of adjoining surfaces & cleaning etc.

complete and as per direction of E-I-C.

Sqm. 6,102.00

4.02 Wall Paneling

4.02.1 Base Frame for paneling

4.02.1.1 Providing & fixing base frame of 50x 50 mm

Marandi Wood treated with anti termite chemical

and fire retardant paint of approved maker,

provided at an average spacing of 600mm c/c both

ways adequately to the wall in line and plumb with

the help of wooden plugs and screws fixed to wall& tightened etc all completeas per direction of E-I-

C

Sqm 178.00


20/50


(Rs.)

in figures in words

RATE (in Rs.)

4.02.1.2 Providing and fixing structural steel frame (for

cladding of wooden partitions/Paneling) on walls

at all heights using Galvanized M.S. square/

rectangular tube in the required pattern as per

architectural drawing, including cost of cutting,

bending, welding etc. The frame work shall be

fixed to the wall with the help of Galvanized M.S.brackets/ lugs of angle iron/ flats or anchor

fasteners etc. which shall be welded to the frame

and embedded in brick wall with cement concrete

block 1:2:4 (1 cement :2 coarse sand :4 graded

stone aggregate 20 mm nominal size) of size

300x230x300 mm, including cost of necessary

centering and shuttering and with approved

expansion hold fasteners on CC/RCC surface,

including drilling necessary holes.

Kg 21,284.00

4.02.2 Providing and fixing thermal insulation with Resin

Bonded Fibre glass wool conforming to IS: 8183

having density 24 kg/m3, 50 mm thick, wrapped

in 200G Virgin Polythene Bags fixed to wall withscrew, rawel plug & washers and held in position

by criss crossing GI wire etc. complete as per

directions of Engineer-in-Charge.

Sqm. 6,091.00

Veneer Finished Paneling Type-A & B:

4.02.3 Providing and fixing Veneer finished wooden wall

paneling in portals & frames (as per drawing &

approval), Panels of 6 mm MDF board cold

pressed with 3.5 mm thick natural wood veneer

duly Spirit polished and melamine matt coat in

design and pattern as per drawings & as approved

fixed over a sub strata of 12 mm thick MDF board

duly screwed to the base frame. The panels shallbe fixed leaving a precise gap of 10 mm between

two panels. The sides of frame touching the

masonry will be painted with black Japan. (Base

Frame to be paid in respective Item). (Basic Rate

of Veneer=RS.100/- per sft FOR site)

Sqm. 1,529.00

Metallic Laminate Paneling Type-A & B:

4.02.4 Providing and fixing Metallic Laminate finished

wooden wall paneling with 6 mm thick MDF

board cold pressed with SS Metallic Laminate (1.5

mm thick) of approved shade and make in design

and pattern as per drawings fixed over a sub strata

of 12 mm MDF board duly screwed to the baseframe. The panels shall be fixed leaving a precise

gap of 10 mm between two panels. The sides of

frame touching the masonry will be painted with

black Japan. (Base Frame to be paid in respective

Item). (Basic Rate of SS Metallic

Laminate=RS.140/- per sft FOR site)

Sqm. 170.00


21/50


(Rs.)

in figures in words

RATE (in Rs.)

4.02.5 Providing & Fixing of Panels of 12.5 mm thk

Gypsum board screwed to the wooden/Galvanized

MS base frame over 6 mm thk. MDF and finished

with paper tape, joining compound and top coat of

primer as required. (Base Frame to be paid in

respective Item)

Sqm. 82.00

4.02.6 Providing & Fixing of Panels of 12 mm thk MDF

screwed to the wooden/Galvanized MS base frame

as per drawings and finished with top coat of anti-

termite paint and as required. (Base frame to be

aid in res ective item

Sqm. 1,603.00

4.02.7 Providing & Installation of Panels of 17 mm thk

Superior Quality MDF Routed as per design

screwed to the wooden/Galvanized MS base frame

over 6 mm thk. MDF as per drawings and finished

as approved. (Base Frame & finishing to be paid in

respective Item)

Sqm. 387.00

4.02.8 Extra for finishing the Routed MDF panels with:

4.02.8.1 High Gloss Automotive paint as per the approved

sam les.

Sqm. 349.00

4.02.8.2 High Gloss Spray Enamel Paint as per the

approved samples.

Sqm. 39.00

4.02.9 Acoustic Lattice Paneling Type-A, B & C:

Providing and fixing (American Walnut or as

approved) finished Acoustical Lattice wooden wall

paneling consisting of base frame treated with antitermite chemical of approved make. Panels to be

installed as per specification. The Timber

melamine effect acoustic wall panels made out of

Fire Rated MDF core material. The acoustic wall

panels shall be in size of 128x2440x18mm (thk).

The back of timber melamine panels shall be

laminated with Soundtex black acoustic tissue to

provide NRC not less than 0.8. The acoustic

timber wall panels shall be with tongue and groove

detailing along the length of panels, with square

edges on 2 sides along the width of panels. The

wall panels shall be clipped into aluminum

channels and clips Keel and Fastener system at

600mm c.c. Density -800kg /m3, R.H 70, Fire

Rated Euro Class B and C formerly Class 0 andClass 1 BS476 part 6 and 7 respectively.

4.02.9.1 Perforated panels having perforation to 25/30 mm

diameter holes, at 32/35 mm c/c at the back face,

and front of the panels to have cut with grooves of

3mm at 16mm c/c.

Sqm. 835.00

4.02.9.2 Non-perforated panels at back & front of the

panels to have cut with grooves of 3mm at 16mm

c/c.

Sqm. 377.00

Fabric Finished Panels


22/50


(Rs.)

in figures in words

RATE (in Rs.)

4.02.10 Fabric Finished Acoustic Panels Type-A, B &

C:

4.02.10.1 Providing & Installing of fire retardent Fabric

finished Wall Panel having minimum 40 mm thick

High density glass wool with natural square edge

(Size: 600*600 minimum or as approved),

installed with concealed grid Hook on system anddemountable panels. Wall brackets 50*50*75 mm

& 2.8 mm thick shall be installed @ 1200 mm c/c

for installation of panels. Panels shall be

manufactured from High density glass wool with

visible surface as a glass fiber fabric and the back

of the tile covered with glass tissue. The glass

wool core of the tiles shall be tested and classified

as non combustible according to prEN ISO 1182.

The system should have Sound Absorption NRC

value of 0.9 (according to EN ISO 11654). Tiles

should withstand a permanent ambient RH Upto

95% at 30*C without sagging, warping or

delaminating (ISO 4611).

Sqm. 2,008.00

4.02.10.2 Fabric Finished Wood Wool Acoustic Panels

T e-D:

Providing and fixing fire retardent fabric on 6mm

PU foam over 25mm thick wood wool cement slab

as per approved sample and shade on framework

with supports. The wood wool slabs shall be

backed with 50mm thick resin bonded glass wool

(24kg/m3) cut to size and inserted in framework

and held in place with 28Gx12mm GI wire netting.

Fabric shall be stretched flat on PU foam over

wood wool cement slabs and fixed with rubber

adhesive and screws complete including fixing of

20x6mm teakwood beading over wall paneling,

size and pattern as per drawings. All beading shall

be wax polished after filling wood filler and sand

papering to smooth finish. Entire work shall be

done as per drawings, and as directed. (Basic cost

of fabric Upto Rs. 1200/meter). (GI/MS base

frame will be paid in the respective item)

Sqm. 225.00

4.02.10.3 Fabric Finished Non-Acoustic panels Type-E:

Providing and fixing fire retardent fabric on 6mm

thk PU foam over 12mm thick marine ply as per

approved sample and shade on the framework

600x600mm centre to centre (max.), fixed to wall

surface. Fabric to be stretched flat on PU foam

over marine ply and fixed with rubber adhesiveand screws complete including fixing of 20x6mm

teakwood beading over wall paneling, size and

pattern as per Architect. All beading to be wax

polished after filling wood filler and sand papering

up to smooth finish. Entire work to be done as

per drawings, specifications and direction of E-I-

C.(Basic cost of fabric Upto Rs. 1200/meter).

(GI/MS base frame will be paid in the respective

item)

Sqm. 321.00

4.02.11 Light Weight Sound Insulating partition


23/50


(Rs.)

in figures in words

RATE (in Rs.)

4.02.11.1 Providing and fixing wooden Partition 150 mm

thick including base frame of red oxide anti

corrosion paint MS Tube as per requirement

treated with anti corrosive red oxide of approved

make, provided at average 600mm c/c both ways

fixed to wall with dash fasteners and covered with

12 mm thick Marine ply of approved make onboth side, followed by 6 mm thick superior grade

MDF & finished with 3.5 mm thick Veneer duly

Spirit polished with melamine matt coating with

desired finishing. Grooves of approved size to be

provided at joints.

Sqm 10.00

4.02.11.2 Providing and fixing sound insulating partition,

122mm thick, comprising 25mm thick Gypsum

Board (each individual layer built up with 2 layers

12.5mm Gypsum Board) fixed on one side of

galvanized 98x50x18G studs, 1220mm c/c frame.

Frame members fixing system to be as per

manufacturer. Cavity of the frame behind Gypsum

boards to have 50mm thick fiber glass blanket (24kg/m3) and held in place with 28Gx12mm GI wire

netting. The frame to be fixed to floor/ceiling with

channels with 6mm dia steel screws with

expansion fasteners, 300mm c/c in two rows

(staggered) as per drawing. The lower layer of

Gypsum board to have joints over frame and to be

screwed to the frame at spacing not exceeding

300mm c/c and second layer of Gypsum board to

have joints staggered with respect to the first layer.

All joints between the boards in both layers to be

taped with paper tape and finished with jointing

compound so as to provide smooth surface and

joints with floor and ceiling to be mastic caulking.

Entire work to be done as per drawing and as

directed by E-I-C.

Sqm 44.00

4.02.12 Providing & Fixing of lacquer glass as per

approval in any color fixed with clear neutral

silicon of make GE windily 20/ slipup or Dow

Corning 995 on a perfectly leveled Marine ply of

minimum 12mm thickness mounted on the RCC

wall/any other structure. The Lacquered glass shall

be highly durable, humid resistance, polyurethane

lacquer glass. The glass to be manufactured by

industrial curtain coating process. It should meet

quality standards as per BS EN 1036 1999 &

conform to persoz hardness test of at least 220

oscillations. The substrate of the glass should

confirm to Standard BS EN 572 1995 parts 1 & 2.

Lacquered glass to be manufactured to tight

specifications, relating to consistency of color,

opacity and homogeneity throughout production

campaigns and also to the ageing properties,

mechanical resistance, and resistance to humidity

and to chemical agents of the lacquer. The color of

the lacquer should remain stable when exposed to

normal levels of ultra-violet light in interior

applications.


24/50


(Rs.)

in figures in words

RATE (in Rs.)

4.02.12.1 Lacquer glass of 6 mm thickness fixed with 25

mm studs fixed on wooden/MS Base frame duly

primer coated, covered with 1 layer of 6 mm thick

Marine ply followed by another layer of 6 mm

thick Superior grade MDF of approved make on

one side. The sides of frame which touches the

masonry will be painted with black Japan.Necessary groove of 6 mm * 6 mm required at

joints to be provided, as per approved details etc

all complete. (base frame to paid in respective

item)

Sqm. 25.00

4.02.13 Providing and Fixing 100 mm. high skirting of

superior quality MDF board cold pressed with 3.5

mm thick veneer of approved quality & as per

required design to be fixed on wall & floor

junction including a 1st class wenge wood lipping

on the top edge. The skirting shall be fastened to

the wall leaving pre-determined spacing from the

floor for fixing of carpet flooring as applicable.

The skirting shall be true to line and plumb andshall be duly spirit polished and finished with

melamine matt coating.

Rmt 950.00

4.03 GRC panel

4.03.1 Providing & fixing Dry Cladding with GRC panel

of 60mm thickness on internal walls upto a height

of 10 mtrs., fixed to internal wall on structural

steel frame work with the help of SS clamps, pins

etc and sealing the joints with approved weather

sealant as per the architectural drawing &

approval. Including necessary scaffoldings

required for installation. Installation to be done by

specialized vendor in strict supervision if rerquired

as per the manufacture's specification. (Thestructural frame work, SS cramps & pins etc shall

be paid separately in respective items)

Sqm. 34.00

4.04 Distempering with 1st quality acrylic distemper,

having VOC (Volatile Organic Compound)

content less than 50 grams/ litre, of approved

brand and manufacture, including applying

additional coats wherever required, to achieve

even shade and color. Including providing and

applying white cement based putty of average

thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to

prepare the surface even and smooth complete.

4.04.1 Two Coats Sqm. 2,648.00


25/50


(Rs.)

in figures in words

RATE (in Rs.)

4.05 Wall painting with premium acrylic emulsion

paint of interior grade, having VOC (Volatile

Organic Compound) content less than 50 grams/

litre of approved brand and manufacture, including

applying additional coats wherever required to

achieve even shade and color. Including providing

and applying white cement based putty of averagethickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to

prepare the surface even and smooth complete.

4.05.1 Two Coats Sqm. 1,954.00

Low VOC Texture Paint Type-A, B & C:

4.06 Providing and applying Texture Paint with a finish

as per approved sample on interior/External wall at

all levels i/c coat of sealer and two coats of primer

on POP/ prepared leveled surface as per

manufacturer's specification by a specialist

contractor authorized by the manufacturers,

including scaffolding, protection of adjoiningsurfaces, cleaning etc. complete.

4.06.1 Stucco(Texture Paint Type-A):Finish of vapor

permeable having a marble effect in three or more

coats, finished with a steel trowel and protecting

coats of cera wax.

Sqm. 2,269.00

4.06.2 Marmarino Finitura(Texture Paint Type-B):

Finish of vapour permeable lime plaster finish for

exterior/interior with selected marble granules in 3

coats over a coat of primer and final coat of

finitura polished with steel trowel and a protection

coat of cera protectiva as per company

s ecifications.

Sqm. 1,572.00

4.06.3 White Texture paint(Texture Paint Type-C):

Finish of vapor permeable having a marble effect

in three or more coats, finished with a steel trowel

and rotectin coats of cera wax.

Sqm. 307.00

4.07 Wooden Box Paneling

Veneer Box Paneling with marine ply

4.07.1 Providing and fixing Veneer finished wooden Box

paneling over existing Columns consisting of 19

mm thick Marine ply, cold pressed with 3.5 mm

thick veneer of approved make & shade in design

and pattern as per drawings. The panels shall have

grooves of 9.5 mm x 9.5 mm at corners with 6mm

thk wooden lipping around the grooves/or SS

metallic laminate (1.5 mm thick). The panels andthe groove shall be spirit polished and finished

with melamine matt coating to an even shade as

per the approval. Basic Rate of Veneer:Rs-100 per

sft FOR site & of SS metallic laminate: Rs-140 per

sft FOR site.

Sqm. 285.00

Veneer Box Paneling with flexi ply & MS frame

work


26/50


(Rs.)

in figures in words

RATE (in Rs.)

4.07.2 Providing and fixing Veneer finished wooden Box

paneling over existing Columns consisting of 12

mm thick flexi ply, cold pressed with 3.5 mm

thick veneer of approved make & shade in design

and pattern as per drawings. The panels shall be

installed over a tubular MS base frame of 25 mm *

25 mm as per requirement & have grooves of 9.5mm x 9.5 mm at corners with 6mm thk wooden

lipping around the grooves/or SS metallic laminate

(1.5 mm thick). The panels and the groove shall be

spirit polished and finished with melamine matt

coating to an even shade as per the approval. Basic

Rate of Veneer:Rs-100 per sft FOR site & of SS

metallic laminate: Rs-140 per sft FOR site.

Sqm. 285.00

Laminated Box Paneling

4.07.3 Providing and fixing Laminate finished wooden

Box paneling over existing Columns consisting of

12 mm thick Flexi Ply cold pressed with 1.5 mm

thick Laminate of Approved make & shade indesign and pattern as per drawings. The panels

shall have grooves of 7.5 mm x 7.5 mm at corners

with 6mm thk wooden lipping around the

grooves/or SS laminate as per drawing. The panels

and the groove shall be spirit polished and finished

with melamine matt coating to an even shade as

per the approval of the E-I-C. Basic rate of

laminate: Rs: 70 per sft FOR site

Sqm. 142.00

Wall Paper

4.08 Providing & Installing of wall paper as per

approved samples having 20% recycled content by

weight minimum 10% post-consumer, and meets

or exceeds all type-II requirements of CCC-W-408A/D and industry voluntary standard CFFA-w-

101A/D. Weight of minimum 20 to 13.3 oz/ly

(619 to 452gms/sqm) & having a minimum width

of 52 to 54". Backing of Osnaburg or approved

equivalent, Fire safety norms as per Class A

(ASTM E-84) Tunnel Test, Corner burn test as per

NFPA 286 & Life safety code NFPA 101. All

material & adhesive shall be free from Lead,

Mercury, Cadmium & chromium & have anti

microbial features. (Note: No extras will be paid

for overlapping & wastages or any additional

material required for installation) (Basic cost of

Wall Paper Upto: Rs.100 per sft FOR site)

Sqm. 119.00

Pin-Up Board

4.09 Providing and fixing PIN-UP BOARD of size as

per drawing using 12mm thick cellotex board with

backing of 6mm BWP ply of approved brand with

hidden second class teakwood margin on all edges

and with handloom fabric stretched and pasted on

top of the board (the basic cost of the fabric shall

be Rs. 1200 per metre). Frame and the backing ply

shall be fixed to the wall with approved fixing

arrangement, all incidentals complete as per

drawings / as directed.

Sqm. 50.00


27/50


(Rs.)

in figures in words

RATE (in Rs.)

Magnetic White board

4.10 Providing and fixing of magnetic white board of

approved make scratch resistant matt finish P3

surface consisting of ceramic steel of thickness

0.55mm to 0.65 mm, having a weight of 3-4 kgs

per sqm. The core material shall be of interior

grade 9mm thickness with density 700 to 800

k /cum.With a backing of galvanized steel of 0.25 mm

thickness having approximate weight of 1.96

kgs/sqm. This entire assembly shall be housed in

an anodized aluminum extruded section

conforming to IS-6477 and IS-3965/2673 and

corners of moulded ABS. The front and back

surface will be affixed with 10-15 micron silver

matt satin finish. This should be provided with

clamp for hanging arrangement with locking

facility including one set of accessories comprising

of magnets, magnetic dry markers and magnetic

4.10.1 4 x 10 (1200mm x 3000mm) Nos 7.00

4.10.2 4 x 6 (1200mm x 1800mm) Nos 11.00

4.10.3 3' x 4' (900mm x 1200mm) Nos 9.00

4.10.4 2' x 4' (600mm x1200mm) Nos 7.00

4.11 Structural Steel Frame work

4.11.1 Providing and fixing structural steel frame (for dry

cladding with 30 mm thick gang saw cut with

machine cut edges sand stone) on walls at all

heights using M.S. square/ rectangular tube in the

required pattern as per architectural drawing,

including cost of cutting, bending, welding etc.

The frame work shall be fixed to the wall with the

help of M.S. brackets/ lugs of angle iron/ flats etc.which shall be welded to the frame and embedded

in brick wall with cement concrete block 1:2:4 (1

cement :2 coarse sand :4 graded stone aggregate

20 mm nominal size) of size 300x230x300 mm,

including cost of necessary centering and

shuttering and with approved expansion hold

fasteners on CC/RCC surface, including drilling

necessary holes.

Kg 344.00

Approved cramps/ pins etc. shall be welded to the

frame work to support stone cladding, the steel

work will be given a priming coat of Zinc primer

as approved by Engineer in- charge and painted

with two or more coats of epoxy paint (Shopdrawings shall be submitted by the contractor for

approval before execution). The frame work shall

be fixed in true horizontal & vertical lines/planes.

(Only structural steel frame work shall be

measured for the purpose of payment, stainless

steel cramps shall be paid for separately and

nothing extra shall be paid).


28/50


(Rs.)

in figures in words

RATE (in Rs.)

4.11.2 Providing and fixing adjustable stainless steel

cramps of approved quality, required shape and

size, adjustable with stainless steel nuts, bolts and

washer (total weight not less than 260 gms), for

dry stone cladding fixed on frame work at suitable

location, including making necessary recesses in

stone slab, drilling required holes etc complete asper direction of the Engineer-in-charge.

Each 35.00

Mosaic/Porcelain wall tiles

4.12 Providing and laying Joint free Mosaic/Porcelain

especially designed and manufactured wall tiles

300 x 600mm or as specified by the engineer in

charge of thickness not less than 9mm of 1st

quality of approved make in all colors, shades as

approved laid on 20mm thick cement mortar 1:4

(1 cement:4 coarse sand) including jointed with

Laticrete or approved equivalent jointing

compound of matching shade etc. complete as per

direction of E-I-C.

Sqm 365.00

Gypsum Board Partition (Perforated & Non

perforated Gypsum Board)

4.13 Providing and fixing partition Upto ceiling height

consisting of G.I. frame and required board,

including providing and fixing of frame work

made of special section power pressed/ roll form

G.I. sheet with zinc coating of 120 gms/sqm(both

side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32

mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm

length or suitable anchor fastener or metal screws

with nylon plugs and the studs 48 mm wide havingone flange of 34 mm and other flange 36 mm and

0.50 mm thick fixed vertically within flanges of

floor and ceiling channel and placed at a spacing

of 610 mm centre to centre by 6 mm dia bolts and

nuts, including fixing of studs along both ends of

partition fixed flush to wall with suitable anchor

fastener or metal screws with nylon plugs at

spacing of 450 mm centre to centre, and fixing of

boards to both side of frame work by 25 mm long

dry wall screws on studs, floor and ceiling

channels at the spacing of 300 mm centre to

The boards are to be fixed to the frame work with

joints staggered to avoid through cracks, M.S.

fixing channel of 99 mm width (0.9 mm thick

having two flanges of 9.5 mm each) to be providedat the horizontal joints of two boards, fixed to the

studs using metal to metal flat head screws,

including jointing and finishing to a flush finish

with recommended jointing compound, jointing

tape, angle beads at corners (25 mm x 25 mm x

0.5 mm), joint finisher and two coats of primer

suitable for board as per manufacture's

specification and direction of engineer in charge

4.13.1 75 mm overall thickness partition with 12.5 mm

thick double skin fire rated board conforming to

IS: 2095: art I

Sqm 30.00


29/50


(Rs.)

in figures in words

RATE (in Rs.)

4.13.2 Providing & fixing single layer 12.5 mm thick

perforated gypsum board wall paneling using

board of size 1200*2400 mm, with four tapered

edges, Upto 16% perforation area of board with 12

mm dia holes (square), backed with acoustic tissue

having NRC 0.6 to 0.75, screw fixed with drywall

screws of 25 mm at 300 mm centers. screwed to45 mm channel section 0.4 mm thick having two

flanges of 18 mm each placed at 600 mm C/C in

25*25 mm wall angle 0.4 mm thick having two

flanges of 25 mm each, fixed to floor & ceiling

with nylon sleeves & steel screws at 610 mm

centers. Fixing bracket 0.9 mm thick, 29.5 mm

wide & 195 mm long, fixed to the wall with the

help of nylon sleeves & steel screws at 900 mm

C/C to hold the sections in position & level.

Sqm 508.00

Square edges of the board to be finished with

jointing compound, joint paper tape & two coats

drywall top coats per recommended practice of the

manufacturer, including providing & fixing of 50

mm thick resin bounded 24 kg/cum glass woolinsulation fixed to the frame with the help of GI

wire mesh to improve the NRC etc all complete.

Zigzag Contours Plaster

4.14 Providing zigzag contours in cement plaster on the

existing wall in cement mortar (1:4) 38mm thick

average (12mm thick to 62mm thick) as shown in

drawings held in with 28GX12mm GI wire netting

fixed with nails. The entire plastered surface shall

be finished with two coats of acrylic emulsion

black paint over a coat of primer. Entire work to

be done as per drawing and specifications.

Sqm 212.00

Acoustic Plaster Paint

4.15 Providing & applying K-13 Standard Grade, sound

absorbing cellulose-base plaster, organic in nature,

free of asbestos, fiberglass, or manmade mineral

fibers and treated with fire resistant chemicals,

sprayed with high pressure equipment to the

substrate in white color, construction material

Class B1 according to DIN 4102, to be sprayed at

an average thickness of 50mm, including

protection cover for surfaces that are not to be

sprayed. Clips, hangers, supports, sleeves and

other attachments to substrate shall be fixed by

other agencies prior to spray plaster activity

whereas ducts, piping and other suspended

equipment shall be placed / fixed after the spray

activity. All materials shall be supplied in

unopened containers bearing the name of

manufacturer, product identification and reference

to UL testing.

Sqm 25.00


30/50


(Rs.)

in figures in words

RATE (in Rs.)

The manufacturer or the applicator shall provide

MTC complying material with ASTM E-84 / U. L.

723, tested at a minimum of 5 thk Class I, Class

A, Flame Spread: 5, Smoke Development: 5,

ASTM E-1042, Non corrosive per UMB-80, Bond

Deflection per ASTM E-759: 6 deflection in 10

span no spalling or delamination. The plastershall be cured with natural ventilation. The

applicator / manufacturer shall provide with test

data that the acoustical plaster gives absorption co-

efficient NRC 0.95 and meet the individual

absorption coefficient at 125hz=0.26, at

250hz=0.68, at 500hz=1.05, at 1khz=1.10, at

2khz=1.03 at complete octave band.

5.00 DOORS, WINDOWS, GLAZING AND

COVERING

5.01 Glass Partition on "C" channel.

5.01.1 Providing & Fixing 12 mm thk. Toughened Clear

Glass partition on aluminum 'C' channel of

25x25x1mm size with Silicon Sealant filling as

approved, inclduing making groove of 25 mm x 25

mm in floor with floor cutting machine, fixing

aluminium "C" channel in the groove with suitable

screws and fasteners and work to be completed as

er the drawin s

sqm 298.00

5.01.2 Providing & Fixing 8 mm thk. Toughened Clear

Glass in windows on aluminum 'C' channel of

25x25x1mm size with Silicon Sealant filling as

approved. The work is to be completed by fixing

the cannel to the required location and then

lacin the lass.

sqm 11.00

5.02 Frameless Glazed Door

5.02.1 Providing and fixing 12 mm thick frameless

toughened glass door shutter of approved brand

and manufacture, including providing and fixing

top & bottom pivot & spring type fixing

arrangement and making necessary holes etc. for

fixing required door fittings, all complete as per

direction of Engineer-in-charge (Door handle, lock

and stopper etc. to be paid separately).

sqm 57.00

5.03 Film on Glass:

5.03.1 Providing and fixing antishatter sun film

(Minimum thickness of 2 mil) on glass for

Etching effectas per detail design and pattern.

sqm 183.00

5.03.2 Providing and fixing frosting film (Minimum

thickness of 2 mil) in required pattern as per the

approval, design & Pattern.

sqm 178.00

5.04 Glass Door Fittings & Accessories

Supply and Fixing of following door fittings as per

selection of the Engineer-in-charge

5.04.1 SS Door stopper/ buffer floor stop half dome with

45mm dia with fixing accessories, in satin Chrome

finish.

Nos 26.00


31/50


(Rs.)

in figures in words

RATE (in Rs.)

5.04.2 Top pivot point: top patch with plastic socket for

top pivot 15 mm , Satin Stainless Steel finish.

Nos 26.00

5.04.3 Over Panel Side Panel Connecting Patch with

Pivot, with inserts (1 x stop, 2 x blank), Satin

Stainless Steel finish

Nos 39.00

5.04.4 Top & Bottom patch fitting: top patch 15 mm ,

Satin Stainless Steel finish & bottom patch with

insert for floor spring spindle, or round pivot 14

mm . Satin Stainless Steel Finish.

Nos 39.00

5.04.5 SS glass door pull handle: back to back with

350mm CTC, adjustable fixing for glass, wood

and metal doors in satin stainless steel. The pull

handles should have supporting washer with raised

bevelling on the outer surface. Length =450mm,

25mm dia - SS304

Nos 26.00

5.04.6 Heavy duty floor spring with 90 Hold Open: floor

spring BTS 75V EN 1-4 with std. spindle andcover plate. The floor spring with backcheck and

adjustable closing speed from 175. With 90 hold

open. As per EN 1154. Satin stainless steel Finish.

Nos 26.00

5.04.7 Patch lock for glazed doors: corner lock, prepared

for Europrofile cylinder, single throw, bolt

projection 20 mm including epc both side key

operation and lock keeper plate, Satin Stainless

Steel Finish.

Nos 39.00

5.04.8 Wall to Glass Clamping Patch: Std with pivot

insert 15 mm with fixing plate, Satin Stainless

Steel Finish.

Nos 26.00

5.04.9 Glass to Glass Connecting Patch to Wall/Ceiling:

Universal patch fitting for connection of overpanel

and sidelight, Std for 12 mm glass, with or with

out fin on one side, with inserts (1 x stop, 2 x

blank), Satin Stainless Steel Finish.

Nos 26.00

5.04.10 Double Glass Connector: Universal patch fitting

for connection of overpanel and sidelight, Std for

12 mm glass, with or with out fin on one side, with

inserts (1 x stop, 2 x blank), Satin Stainless Steel

Finish.

Nos 26.00

5.05 Providing and fixing ISI marked flush door

shutters conforming to IS : 2202 (Part I) decorative

type, core of block board construction with frame

of 1st class hard wood and well matched teak 3 ply

veneering with vertical grains or cross bands and

face veneers on both faces of shutters.

5.05.1 35 mm thick including ISI marked Stainless Steel

butt hinges with necessary screws

sqm 92.00


32/50


(Rs.)

in figures in words

RATE (in Rs.)

5.06 Providing and Fixing Cherry/Maple beech wood

SR (sound resistant) doors made out of

Marandiwood frame of size 50 x 50 mm at 450

mm c/c covered with 12 mm thick (in two layers

of 6 mm each) Superior Quality MDF on both

sides cold pressed panels made with 3.5 mm thick

veneer (or as approved by the E-I-C) finish as perrequired design. The door shall be framed with

Cherry/Maple beach wood of section thickness 72

x 150 mm all around as per design. The gap of 50

mm within the door shall be filled up with 50 mm

thick Fiber Glass wool packed in hessian cloth for

sound insulation. All natural wood & veneer

surfaces shall be spirit polished and finished with

a coat of melamine matt finish.

Sqm. 155.00

The door shall have all stainless steel fittings

including butt hinges (4 nos each panel) of

approved make stainless steel AISI 316 grade butt

hinges of size 100x75x2.5 mm with self

lubricating ball bearing complete with screw and

satin finish stainless steel AISI 304 grade leverhandle , Cylinder , Closed Body Mortise lock with

Strike Plate, Heavy Door Closer of approved make

complete with latch lock, strike plate and screws

etc. and as per direction of E-I-C.

5.07 Providing wood work in frames of doors,

windows, clerestory windows and other frames,

wrought framed and fixed in position with hold

fast lugs or with dash fasteners of required dia &

length ( hold fast lugs or dash fastener shall be

aid for se aratel .5.07.1 Second class teak wood cum 4.00

Roller Blinds

5.08 Providing and Fixing Roller blinds of shade and

type as given below and of approved make

comprising of roller tube, clutch, idler, installation

brackets and bottom weight. Roller tube shall be of

anodized extruded Aluminum section of min.

1.0mm thickness and 32mm O.D. Clutch shall be

of wrap spring design with high strength fiberglass

reinforced polyester assembly. Clutch mechanism

shall be crash proof, prevent slippage and shall

raise and lower smoothly to any desired height.

Clutch shall never need adjustment.

5.08.1 With Screen fabric Sqm. 207.00

5.08.2 With Solar Blinds Sqm. 240.00

5.09 DOOR FRAME & SHUTTER: Providing &

Fixing of CBRI tested & TAC approved 77mm

thick Acoustic cum Fire/Smoke check door of 120

minutes fire rating with 38dB Noise reduction

property as per the specification mentioned below:


33/50


(Rs.)

in figures in words

RATE (in Rs.)

5.09.1 Supply & Installation of Cherry/Maple Wood Door

Frame of section 100mm x 75mm with heat

activated intumescent fire seal strip of size 10mm

x 4mm Twin Type (Astroflame U.K make or

approved equivalent) mounted on the door frames

on all three sides and one coat of anti-termite fire

retardant primer. Door shutter consisting of 77mmthick door shutter having 38 dB acoustic cum 120

min. fire rating having infill of 49mm thick resin

bonded glasswool of 24kg / M3 density with FR

Acrylic Sealant sandwiched between two 9mm

thick (Starpan Make or Approved equivalent)

Calcium Silicate boards a 100% without asbestos,

Brucite and Meerschaum having a density not less

than 1150kg/M3 and thermal conductivity 0.14

W/m* K faced with 3.4mm thick commercial ply

1mm laminated on both sides with heat activated

intumescent fire seal strip of size 10mm x 4mm

mounted in the grooves having hardwood lipping.

Sqm 114.00

Including Marshall Acoustic seals around the jamb

and head on frame rebates, which is adjustable to

seal for noise, light and smoke for a maximum gap

of 8mm between frame and shutter.

Consisting of Drop Seal (2 nos): A medium

temperature smoke door bottom seal, with an

extruded siliconsealing component. It is heavy

duty automatic door bottom seal which is spring

leaded to lift clear of the floor as soon as the door

leaf is opened by a few millimeters. The seal is

operated automatically by pressure against the

door jamb on the adjusting screw. It seals when

the door closes and retracts automatically when the

door is opened. It is self-leveling.

Astragal Seal (1 NO): Marshall Astragal seal is

acoustic and smoke astragal design for meeting the

stiles of rebated double leaf doors. The aluminium

trim conceals the sealing portion of the seal in

rebate to provide acoustic properties.

5.09.2 Door Closer:Supply & Installation of heavy duty

door closer, CE & EN 1154 certified 2 hrs fire

rated with 10 years warranty tested to BS 476 Part

22 and as er a roved make.

Nos 48.00

5.09.3 Panic Exit Devices: Supply & Installation of

single/double leaf panic exit devices, CE & EN

1125 certified 2 hrs fire rated tested in accordance

with BS 476 Part 22.5.09.3.1 Single Leaf Panic Bar Nos 4.00

5.09.3.2 Double Leaf Panic Bar Nos 24.00

5.09.3.3 Out Side Access Trim: Supply & Installation of

Out Side Access Trim

Nos 48.00

5.09.4 Dead Lock: Supply & Installation of dead lock

with cylinder, 2 hrs fire rated having 7 years

mechanical warranty tested to BS 476 Part 22 and

as tested from CBRI Roorkee.

Nos 48.00


34/50


(Rs.)

in figures in words

RATE (in Rs.)

5.09.5 D-Type Handle:Supply & Installation of stainless

steel D- Type pull handle of size 200mm long

19mm dia.

Pair 48.00

5.09.6 Hinges: Supply & Installation of 304 grade

stainless steel ball bearing hinges of size 100mm x

100mm x 3mm.

Nos 240.00

5.10 Providing and cold pressing approved quality &

shade Veneer (3.5mm thick) on the Panels of

existing doors including cutting, pasting &

finishing the doors panels with lacquered polish.

The panels shall be fixed leaving a precise gap of

10 mm between two panels. (Basic Rate of

Veneer=RS.100/- per sft FOR site)

Sqm 206.00

5.11 Providing & fixing 18mm thick mirror polished,

machine cut black granite (galaxy type)

door/window frame of required width with rebate

of required size as per approved sample and

making full round moulding on exposed edgesincluding rubbing, curing etc. complete at all

levels and as er direction of E-I-C.5.11.1 Door / Window frame 300mm width (with

necessary groove or overlap required for the

installation of lass or door anel

Rmt 295.00

5.11.2 Moulding of size Upto 40x40mm Rmt 591.00

5.12 Windows & Shutters

5.12.1 Sliding Glazed Aluminum Window SGW1

(Control Room)

Sqm 20.00

Providing

Documents

Vol II (ICAR Audi Interior 2013)