Wall Mounted Touch Panel - iskydance.comT12-1,T13-1,T14-1,T15-1.pdf · Touch panel 4 zone 1-5 color DMX512 master, can also be used as 4 zone 1-5 color RF remote. DMX signal output,

● Touch panel 4 zone 1-5 color DMX512 master, can also be used as 4 zone 1-5 color RF remote.

● DMX signal output, comply to standard DMX512 protocol, compatible with DMX decoder from any supplier.

● When used as RF remote, each zone can remote control multiple Skydance’s 2.4G LED controllers.

● Ultra sensitive high strength glass touch panel with touch color slide in the middle and backlighting.

● Smooth and accurate color adjustment by touching the color slide.

● Touch keys with chord tones and LED indicator.

Touch key + RF 2.4GHz

256 levels

0 -100%

Ta: -30 OC ~ +55 OC

T c: +85 OC

LVD RED

RGB+CCT

T15-1

20

Output signal DMX512, RF 2.4GHz

Input voltage 85-265VAC

Input current Max 0.1A

Operation temperature

Case temperature (Max.)

Environment

IP20 IP rating

Dimming data

Dimming range

30m

Technical Parameters

Input and Output

Safety and EMC

EMC standard (EMC) EN301 489,EN 62479

Radio Equipment(RED) EN300 328

Certification CE,EMC,LVD,RED

EN60950Safety standard(LVD)

Warranty

5 years Warranty

Input signal

RF Control distance

Dimming level

Model No.: T11-1,�T12-1,�T13-1,�T14-1, T15-1�

4 Zone/1-5 color/Glass touch panel/Color slide/AC input/DMX 512 and RF 2.4G signal output

Features

Wall Mounted Touch Panel

T14-1T13-1T12-1T11-1

Light type

Output DMX channel number

Model No. T14-1T13-1T12-1T11-1

Dual color RGB RGBW

4 8 12 16

T15-1

Single color

User Manual Ver 1.0.4 www.iskydance.com Page 1

Mechanical Structures and Installations

LNGNDD+ D-

DMX OUTPUT INPUT85-265VAC

T11-1/ T12-1/T13-1T14-1 / T15-1

DMX output +

DMX output -

DMX signal GND

AC input L

AC input N

11.5mm86mm

86

mm

59mm

62mm 35mm

45.5mm

Typical base as below:

European style 86 sizeTouch panel Baseplate BaseUninstall

Installation diagram:

T11-1 Single color panel

T12-1 Dual color panel

Zone Zone Zone Zone

Scene

Scene

Scene

Power

Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.4 zone control seperately or synchronously, each zone could control multiple receivers.

Short press recall scene. Long press 2s to save the current state into 1/2/3.

Switch

Scene

Scene

Zone

Zone

Zone

Zone

Power

Switch between color temperature / brightness slide

Color temperature / Brightness slide.

Brightness slide.Zone

Zone

Zone

Zone

Scene Scene Scene

PowerTurn on/off all zone light.

PowerTurn on/off all zone light.

Switch

Zone Zone Zone Zone


Short press recall scene. Long press 2s to save the current state into 1/2.Scene Scene

Key function


T11-1,�T12-1,�T13-1,�T14-1, T15-1 Wall Mounted Touch Panel

Note: After touch power key to turn off light, long press power key for 5 seconds will turn on or turn off tone.

T15-1 RGB+CCT panel

Zone

Zone

Zone

Zone

T13-1 RGB panel

Zone Power

Zone White

Zone

Zone

Mode

W

Brt/Speed

T14-1 RGBW panel

ZONE

ZONE

ZONE

ZONE

1

2

3

4


Bright

Mode

Speed

Power

Mode

Speed

Bright

Short press play 10 built-in mode, long press 2s run mode-cycle.

Adjust dynamic mode speed or RGB color saturation, 10 levels.

Adjust brightness, 10 levels.

Color slide.Power

Turn on/off all zone light.

Zone Zone Zone Zone


Mode


Color slide.Power


Zone Zone Zone Zone


WhiteW

Brt/SpeedAdjust dynamic mode speed or static color brightness,10 levels.

Short press turn on/off W channel, long press adjust W channel brightness.

POWER

SWITCH

M

BRT/SPEED

MODE

Mode


RGB color / Color temperature slide.Power


Zone Zone Zone Zone


Brt/SpeedAdjust dynamic mode speed or static color brightness,10 levels.

SWITCHSwitch between RGB color / Color temperature slide.


D4-L

DMX512 & RDM Decoder

D+

D-

D-

D+

AC100-240VPower Supply12-24VDCConstant Voltage

LN

INPUT85-265VAC

AC85-265V

GNDD+ D-

DMX OUTPUT

DMX signal

T14-1

Wiring Diagram for touch panel work as DMX512 master

Touch Panel work as DMX512 Master

After connect with DMX decoders, please set the DMX decoders address as below:

+

For T14-1 RGBW panelEach zone 4 channel:zone 1 is channel 1 ~ 4, zone 2 is channel 5 ~ 8,zone 3 is channel 9 ~ 12, zone 4 is channel 13 ~ 16,channel 1,5,9,13 is R, channel 2,6,10,14 is G, channel 3,7,11,15 is B, channel 4,8,12,16 is W.

RGBW LED strip RGBW

CW

CW

Zone 1 DMX decoder’s address

Model No. T14-1T13-1T12-1T11-1

1 2 1 2 3 1 2 3 4

2 3 4 4 5 6 5 6 7 8Zone 2 DMX decoder’s addressZone 3 DMX decoder’s addressZone 4 DMX decoder’s address

1

5 6 7 8 9 9 10 11 12

4 7 8 10 11 12 13 14 15 16

3

WW CW R G B R G B W

T15-1

1 2 3 4 5

6 7 8 9 10

11 12 13 14 15

16 17 18 19 20

R G B WW CW



Touch Panel work as RF remote (two match ways)

Use the controller’s Match key

Match:

Short press match key, immediately press Zone

key of the touch panel.

Use Power Restart

Match:

Switch off the power of the receiver, then switch on power again,

immediately short press Zone key 3 times on the touch panel.

The light blinks 3 times means match is successful.

.Delete:

Switch off the power of the receiver, then switch on power again,

immediately short press Zone key 5 times on the touch panel.

The light blinks 5 times means all matched remotes were deleted.

Delete:

Press and hold match key for 5s to delete all match,

The light blinks 5 times means all matched remotes

were deleted.

End user can choose the suitable match/delete ways. Two options are offered for selection:

Wiring Diagram for touch panel work as RF remote

LN

INPUT85-265VAC

AC85-265V

GNDD+ D-

DMX OUTPUT

T11-1/ T12-1/T13-1T14-1 / T15-1

Malfunctions analysis & troubleshooting

Causes Troubleshooting

1. No power.2. Wrong connection or insecure.

1. Check the power.2. Check the connection.

1. DMX decoder first address error.2. Wrong connection of output wires.

1. Check the DMX first address.2. Reconnect output wires.

Wrong color

Malfunctions

No light



Documents

Wall Mounted Touch Panel - iskydance.comT12-1,T13-1,T14-1,T15-1.pdf · Touch panel 4 zone 1-5 color DMX512 master, can also be used as 4 zone 1-5 color RF remote. DMX signal output,