Upload
others
View
7
Download
1
Embed Size (px)
Citation preview
TILES ADHESIVEPRODUCT & TILING GUIDE
BUILDING PRODUCTSWe are stronger
BUILDING PRODUCTSWe are stronger
2016
Arc manufacture and distribute an extensiverange of tiling related products from adhesives & grouts to trims & tools.
Arc has a proven track records in supplying this demanding industry with quality and innovative products.
LT-33 Lightweight Adhesive is recognised by tilers as the best tile adhesive available on the market. It offers exceptional strength, flexibility, workability and yields 60% more coverage than other adhesives. Engineered using recycled materials and special fillers, it is a unique and innovative product.
Our sand based range includes Rapid-Flex in Grey & White, Pro-Flex and T-20, both slow setting flexible white products.
We carry the most extensive range of tile trims in thecountry and can offer a profile for every solution.
This extensive range means Arc offers the largest selection of tiling related products in Ireland.
We are Stronger
TilingRange
Rapid-FlexPro-Flex
T-20Rapid-Set
LT-33Arc-Fix
GROUTSFlexi-GroutFloor GroutWall Grout
FLOOR LEVELLINGHigh Build
Standard Leveller
PRIMERS/SEALERS
TILE ADHESIVE
Substrate PrimersTile Sealers
Tile Cleaners
TILE TRIMSPVC Trims
Metal TrimsBath Seals
Expansion Joints
TANKINGMembranes
Pastes
BUILDING PRODUCTSWe are stronger
BUILDING PRODUCTSWe are stronger
CONTENTS
23
24
24
25
25
26
26
27
27
28
28
29
29
30
30
31
31
32
32
33
33
34
34
35
35
36
36
37
37
38
38
39
39
40
40
41
42
43
General Guidelines
Product Guide - Tile Adhesive
Rapid-Flex White
Rapid-Flex Grey
Pro-Flex
T-20
Rapid-Set
LT-33
Arc-Fix
Product Guide - Grouts
Flexi-Grout
Floor Grout
Wall Grout
Wall & Floor Grout
Product Guide - Preparation Products
High Build Floor Levelling Compound
Self-Level Floor Levelling Compound
Latex Admixture
Tilers Primer
Plastic Ply
Tanking Kit
Sealing & Decoupling Membrane
Sealing Accessories
Tile Backer Boards
Sloping Boards
Shower Bases
Shower Base Drain
Backer Board Washers
Underfloor Heating Mats - 100W/m²
Underfloor Heating Mats - 150W/m²
Digital Thermostat
Flexible Conduit
Multi-Pro Backer Board
Product Guide - Finishing Products
Expansion Joints
Straight Edge Aluminium Trim
Round Edge Aluminium Trim
Straight Edge PVC Trim
Round Edge PVC Trim
Square Aluminium Trim
Aluminium Listello
Bath Seal Plus
Bath Seal Tileover
Sanitary Silicone
Arc Grout & Sealer
Stone Sealer
Granite & Marble Impregnator
Colour Intensifier
Tile & Stone Cleaner - Acidic
Tile & Stone Cleaner - Alkaline
Grout Cleaner
Cement Residue Remover
Cement Residue Remover for Stone
Preparation - Walls
Gypsum Plaster
Gypsum Plasterboard
Sand / Cement Render
Concrete Blocks
Existing Tiles
Plywood / Calcium Silicate Boards
Backer Boards onto Solid Substrate
Backer Boards onto Rigid Framework
Preparation - Floors
Sand / Cement Screed
Concrete Base
Anhydrite Screed
Flooring Grade Asphalt & Bitumen
Existing Tiles
Existing Vinyl Tiles / Sheets
Tongue & Groove - Plywood Overlay
Tongue & Groove - Plastic Ply
Backer Boards onto Timber Floors
Backer Boards onto Concrete Floors
Electric Underfloor Heating
Heated Screeds
Decoupling Membrane
Preparation - Shower / Wet Room
Tile Backer Boards & Showerlays
Tanking System
Tanking Membrane
Technical Guide
European Standards
Priming Guide
Expansion Joint Guide
2016
1
3
3
4
4
5
5
6
7
7
8
8
9
9
10
10
11
11
12
12
14
15
15
16
16
17
17
18
18
18
19
20
20
21
21
22
22
23
SubstrateBefore starting any tiling project ensure that the substrate to be tiled is Clean & dry Free from any contaminants Sufficiently flat Free from all paints, sealers and other coatings Strong and rigid enough to support the tiles, adhesive and groutFor guidelines on substrate preparation, see pages 29 - 39.
The preparation, type of adhesive & grout and whether expansions joints or tile sealer will be required, depends on the type of tile, type of substrate and site conditions.
Tile TypesCeramic and other tile types vary according to material, production method, water absorption, size, thickness and weight. These affect the choice of adhesive and installation procedure.For guidelines on the suitability of each adhesive by tile, see pages 3 - 6.
Substrate PrimingBefore tiling, most wall and floor substrates require priming. The reasons for priming are: To improve the adhesion of cement based products Reduce the porosity of porous substrates A slurry coat mix improves the adhesion to non porous surfaces Produce a barrier between calcium sulphate based surfaces and cement based adhesives to minimise the risk of chemical reaction
See page 42 for a detailed substrate priming guide.
If using an electric drill mixer, blend at a slow speed. Do not exceed 300rpm. Mixed adhesive and grout can be remixed after a short period to freshen up but extra water should never be added after the initial mix as this will reduce final strength.
ApplicationAll packs carry specific instructions but in general the following apply.
Do not apply adhesives & grouts in temperatures below 5ºC
Apply a maximum of 1m² of adhesive at a time
Ensure ribs all run in the same directionFix tiles before the adhesive forms a skin, typically 20 minutes
If a skin forms, remove the adhesive and apply a fresh layer
When grouting, completely fill the tile joints, compact well and ensure there are no voids
Ensure tiles are fixed into a solid bed of adhesive. Do not dot and dab adhesive.
European StandardsAll Arc products are manufactured in accordance with European Standards and meet or exceed the classifications which define the type and properties of each product. See page 41 for an explanation and description of each category and classification.
NOTE: All information given is for general guidance only. Arc cannot accept liability for loss or damage caused by the incorrect use of its products or poor workmanship. The user must ensure the product’s suitability for the application intended and if in doubt should seek a written technical specification for the product’s application.
Sealing TilesTiles and grout are by their nature porous. To prevent the ingress of water and subsequent damage to the substrate and adhesive bond, tile facings and grout should be sealed with an appropriate sealer.
Likewise, to protect against staining from spills and dirt, facings and grout should be appropriately sealed. See pages 24 - 26 for the correct choice of sealer.
Movement JointsMovement joints must be installed in certain areas and positions to prevent tiles debonding from the substrate.
Industry standards suggest that the maximum field should be no more than 10m in each direction but in practice, depending on the individual application, it tends to be between 5 to 8m.
See page 43 for guidelines on the use of movement joints.
Mixing GuidelinesAll Arc adhesives and grouts come with specific instructions on the bag. In general, powder adhesives and grouts should be mixed with clean, cold water until a smooth paste is achieved.
BUILDING PRODUCTSWe are stronger
BUILDING PRODUCTSWe are stronger
General Guidelines
- 1 -
ADHESIVE
GROUTS
PREPARATION
FINISHING
BUILDING PRODUCTSWe are stronger
BUILDING PRODUCTSWe are stronger
P
R
O
D
U
C
T
G
U
I
D
E
Ä
Ä
Ä
Ä
PRODUCT GUIDE - TILE ADHESIVE
Rapid-Flex WhiteA rapid-setting white flexible tile adhesive for fixing most tile types to most substrates.
BUILDING PRODUCTSWe are stronger
Product Code: 20kg - / 10kg -FAFR003 FAFR004
Depth: 3-6mm
Colour: White
Set Time: 2-3 hours
Open Time: 30-40 min
Coverage: 4-5m² per 20kg bag
PRODUCT GUIDE - TILE ADHESIVE
Rapid-Flex GreyA rapid-setting grey flexible tile adhesive for fixing most tile types to most substrates.
Product Code: 20kg - / 10kg -TAFR001 TAFR002
Depth: 3-6mm
Colour: Grey
Set Time: 2-3 hours
Open Time: 30-40 min
Coverage: 4-5m² per 20kg bag
Plywood
Concrete
Plaster
Screeds
Backer boards
Anhydrite screed
Underfloor heating
Bitumen flooring
Plasterboard
Existing tiles
Render
Brick & block
Heated screed
Vinyl tiles
Fibre cement
Asphalt flooring
Porcelain
Ceramics
Terracotta
Quarry
Quartz
Glass
Marble
Mosaics
Limestone
Travertine
Natural Stone
Slate
FOR APPLICATION TO: FOR FIXING:
Plywood
Concrete
Plaster
Screeds
Backer boards
Anhydrite screed
Underfloor heating
Bitumen flooring
Plasterboard
Existing tiles
Render
Brick & block
Heated screed
Vinyl tiles
Fibre cement
Asphalt flooring
Porcelain
Ceramics
Terracotta
Quarry
Quartz
Glass
Marble
Mosaics
Limestone
Travertine
Natural Stone
Slate
FOR APPLICATION TO: FOR FIXING:
BUILDING PRODUCTSWe are stronger
- 3 -
PRODUCT GUIDE - TILE ADHESIVE
Pro-Flex A regular setting white flexible tile adhesive for fixing most tile types to most substrates.
BUILDING PRODUCTSWe are stronger
Product Code: 20kg - TAWC002
Depth: 3-6mm
Colour: White
Set Time: 24 hours
Open Time: 40-60 min
Coverage: 4-5m² per 20kg bag
PRODUCT GUIDE - TILE ADHESIVE
T-20 A regular setting white part flexible tile adhesive for fixing most tile types to most substrates.
Plywood walls
Concrete
Plaster
Screeds
Backer boards
Anhydrite screed
Underfloor heating
Bitumen flooring
Plasterboard
Existing tiles
Render
Brick & block
Heated screed
Vinyl tiles
Fibre cement
Asphalt flooring
Porcelain
Ceramics
Terracotta
Quarry
Quartz
Glass
Marble
Mosaics
Limestone
Travertine
Natural Stone
Slate
FOR APPLICATION TO: FOR FIXING:
Plywood
Concrete
Plaster
Screeds
Backer boards
Anhydrite screed
Underfloor heating
Bitumen flooring
Plasterboard
Existing tiles
Render
Brick & block
Heated screed
Vinyl tiles
Fibre cement
Asphalt flooring
Porcelain
Ceramics
Terracotta
Quarry
Quartz
Glass
Marble
Mosaics
Limestone
Travertine
Natural Stone
Slate
FOR APPLICATION TO: FOR FIXING:
BUILDING PRODUCTSWe are stronger
Product Code: 20kg - TAT2001
Depth: 3-6mm
Colour: White
Set Time: 24 hours
Open Time: 40-60 min
Coverage: 4-5m² per 20kg bag
- 4 -
PRODUCT GUIDE - TILE ADHESIVE
PRODUCT GUIDE - TILE ADHESIVE
Rapid-Set LT-33Rapid-setting white flexible tile adhesive for fixing most tile types to most substrates with exceptional coverage, adhesion and workability.
BUILDING PRODUCTSWe are stronger
Rapid-SetA rapid-setting grey tile adhesive for fixing ceramic floor tiles to solid substrates such as concrete floors.
Concrete
Gypsum plaster
Screeds
Render
Brick & block
Backer boards
Ceramics
Terracotta
Mosaics
Quarry
FOR APPLICATION TO: FOR FIXING:
BUILDING PRODUCTSWe are stronger
Product Code: 20kg - / 10kg - TAFS001 TAFS002
Depth: 3-6mm
Colour: Grey
Set Time: 2-3 hours
Open Time: 30-40 min
Coverage: 4-5m² per 20kg bag
Plywood
Concrete
Plaster
Screeds
Backer boards
Anhydrite screed
Underfloor heating
Bitumen flooring
Plasterboard
Existing tiles
Render
Brick & block
Heated screed
Vinyl tiles
Fibre cement
Asphalt flooring
Porcelain
Ceramics
Terracotta
Quarry
Quartz
Glass
Marble
Mosaics
Limestone
Travertine
Natural Stone
Slate
FOR APPLICATION TO: FOR FIXING:
Product Code: 15kg - TALW002
Depth: 3-6mm
Colour: White
Set Time: 2-3 hours
Open Time: 30-40 min
Coverage: 8-9m² per 15kg bag
- 5 -
PRODUCT GUIDE - TILE ADHESIVE
Arc-FixA ready mixed, non-slip, acrylic based tile adhesive for interior fixing of ceramic tiles to walls.
Concrete
Plaster
Backer boards
Plasterboard
Existing tiles
Brick & block
Ceramics Mosaics
FOR APPLICATION TO: FOR FIXING:
BUILDING PRODUCTSWe are stronger
Product Code: 16kg - TANS001 5lt - TANS002
TANS003 2.5lt -
Depth: 2-3mm
Colour: White
Set Time: 24 hours
Open Time: 20 min
Coverage: 2-3kg per m²
PRODUCT GUIDE - TILE ADHESIVE
Regular-Set LT-33A Regular setting white flexible tile adhesive for fixing most tile types to most substrates with exceptional coverage, adhesion and workability.
BUILDING PRODUCTSWe are stronger
Plywood
Concrete
Plaster
Screeds
Backer boards
Anhydrite screed
Underfloor heating
Bitumen flooring
Plasterboard
Existing tiles
Render
Brick & block
Heated screed
Vinyl tiles
Fibre cement
Asphalt flooring
Porcelain
Ceramics
Terracotta
Quarry
Quartz
Glass
Marble
Mosaics
Limestone
Travertine
Natural Stone
Slate
FOR APPLICATION TO: FOR FIXING:
Product Code: 15kg - TALW001
Depth: 3-15mm
Colour: White
Set Time: 24 hours
Open Time: 40-60 min
Coverage: 8-9m² per 15kg bag
- 6 -
PRODUCT GUIDE - GROUTS
Floor GroutA water and stain resistant wide joint grout for use with all tile types on solid substrates.
BUILDING PRODUCTSWe are stronger
Product Code: 10kg - TAGG001 5kg - TAGG002
Colour: Grey
Set Time: 24 hours
Open Time: 40-60 min
Joint Width: up to 12mm
PRODUCT GUIDE - GROUTS
Flexi-GroutA mould, stain and water resistant, flexible, wide joint grout for use with all tile types and substrates.
BUILDING PRODUCTSWe are stronger
24 x 24 x 10 mosaic
150 x 150 x 8 tile
300 x 300 x 10 tile
600 x 600 x 10 tile
2.4m²
20m²
32m²
60m²
24 x 24 x 10 mosaic
150 x 150 x 8 tile
300 x 300 x 10 tile
600 x 600 x 10 tile
1.6m²
12m²
20m²
40m²
COVERAGE PER 10kg – 3mm JOINT COVERAGE PER 10kg – 5mm JOINT
Product Code: 10kg - MRGG002
Colour: Grey
Set Time: 24 hours
Open Time: 45-60 min
Joint Width: up to 20mm
24 x 24 x 10 mosaic
150 x 150 x 8 tile
300 x 300 x 10 tile
600 x 600 x 10 tile
2.4m²
20m²
32m²
60m²
24 x 24 x 10 mosaic
150 x 150 x 8 tile
300 x 300 x 10 tile
600 x 600 x 10 tile
1.6m²
12m²
20m²
40m²
COVERAGE PER 10kg – 3mm JOINT COVERAGE PER 10kg – 5mm JOINT
- 7 -
PRODUCT GUIDE - GROUTS
Wall GroutA mould, stain and water resistant wall grout for use with most tile types on solid substrates in internal and external locations.
Product Code:
Colour: White & Ivory
Set Time: 24 hours
Open Time: 45-60 min
Joint Width: 2 - 3mm
24 x 24 x 10 mosaic
150 x 150 x 8 tile
300 x 300 x 10 tile
600 x 600 x 10 tile
2.4m²
20m²
32m²
60m²
n/a
COVERAGE PER 10kg – 3mm JOINT COVERAGE PER 10kg – 5mm JOINT
PRODUCT GUIDE - GROUTS
Pro-Line GroutA highly versatile cement based wall & floor grout containing anti mould technology. Flexible, stain& water resistant. Contains 30% recycled materials.
BUILDING PRODUCTSWe are stronger
Set Time: 3 - 4 hours
Open Time: 20 min
Joint Width: 2 - 15mm
24 x 24 x 10 mosaic
150 x 150 x 8 tile
300 x 300 x 10 tile
600 x 600 x 10 tile
1.2m²
10m²
16m²
30m²
24 x 24 x 10 mosaic
150 x 150 x 8 tile
300 x 300 x 10 tile
600 x 600 x 10 tile
0.3m²
2.5m²
4m²
7.5m²
COVERAGE PER 5kg – 3mm JOINT COVERAGE PER 5kg – 12mm JOINT
BUILDING PRODUCTSWe are stronger
- 8 -
10kg - / 10kg - TAGW001 TAGI001 5kg - / 5kg - TAGW002 TAGI002
White Ivory
SIZE COLOUR PRODUCT CODE5kg
2.5kg5kg
2.5kg5kg
2.5kg5kg5kg5kg5kg5kg5kg
Mid GreyMid Grey
IvoryIvoryWhiteWhiteBeigeBrown
CharcoalLight GreyLimestoneSandstone
PROG001PROG002PROG003PROG004PROG005PROG006PROG007PROG008PROG009PROG010PROG011PROG012
PRODUCT GUIDE - PREPARATION PRODUCTS
Self-Level Floor Levelling CompoundA high quality self-levelling compound for use on existing solid substrates and floors.
BUILDING PRODUCTSWe are stronger
Product Code: 20kg - PFLC001 10kg - PFLC002
Application Depth: 1-3mm
Colour: Grey
Set Time: 3 hours
Open Time: 20 min
Coverage: 10m² per 20kg bag at 1½mm
PRODUCT GUIDE - PREPARATION PRODUCTS
High Build Floor Levelling CompoundA high build, flexible, fibre reinforced, rapid-setting floor levelling compound suitable for 2 to 50mm single application.
BUILDING PRODUCTSWe are stronger
Plywood
Concrete
Plaster
Underfloor heating
Plasterboard
Existing tiles
Render
Brick & block
Backer boards
Anhydrite screed
Screeds
T & G floors
Heated screed
Vinyl tiles
Fibre cement
Asphalt flooring
FOR APPLICATION TO:
Product Code: 20kg - PFLC003
Application Depth: 2-50mm
Set Time: 2-3 hours
Open Time: 20-30 min
Coverage: 4.2m² per 20kg bag at 3mm
Concrete Screeds Floated concrete Backer boards
- 9 -
FOR APPLICATION TO:
PRODUCT GUIDE - PREPARATION PRODUCTS
PRODUCT GUIDE - PREPARATION PRODUCTS
Latex Admixture Gives flexibility, increased application depth and greater adhesion to Self-Level Floor Levelling Compound.
Plywood
Concrete
Plaster
Underfloor heating
Plasterboard
Existing tiles
Render
Brick & block
Backer boards
Anhydrite screed
Screeds
T & G floors
Heated screed
Vinyl tiles
Fibre cement
Asphalt flooring
FOR APPLICATION TO:
BUILDING PRODUCTSWe are stronger
Product Code: 5lt - LFLC001
Mix Colour: Grey
Application Depth of Mix: 1-6mm
Set Time of Mix: 3 hours
Open Time of Mix: 20-30 min
Mix Ratio: 4-4½lt latex to 20kg self-level
Arc Tilers PrimerA styrene butadiene co-polymer designed to prime, seal and stabilise substrates prior to tiling.
Plywood
Concrete
Plaster
Underfloor heating
Plasterboard
Existing tiles
Render
Brick & block
Backer boards
Anhydrite screed
Screeds
T & G floors
Heated screed
Vinyl tiles
Fibre cement
Asphalt flooring
FOR APPLICATION TO:
BUILDING PRODUCTSWe are stronger
Product Code: 1lt - STP006 2.5lt - STP007 STP005 5lt -
Colour: Blue
Drying: 30-60 min absorbent surfaces 60-90 min non absorbent
Mix Ratio: Dependent on application
Coverage: 10m² per 1lt neat
- 10 -
PRODUCT GUIDE - PREPARATION PRODUCTS
PRODUCT GUIDE - PREPARATION PRODUCTS
Plastic PlyReinforcement sheet for timber floors. Self-adhesive and ultra thin at 2mm.
Timber floors Plywood T & G floors Chipboard
FOR APPLICATION TO:
BUILDING PRODUCTSWe are stronger
Product Code: GXRS001
Colour: Blue
Application: Self-adhesive
Depth: 2mm
Coverage: Pack contains 1.2m²
Tanking KitA waterproof barrier system designed to protect water sensitive structures and surfaces in tiled areas where regular and frequent exposure to damp conditions is expected.
Plywood
Concrete
Plaster
Plasterboard
Existing tiles
Render
Screeds
Backer boards
Anhydrite screed
Brick & block
Vinyl tiles
Fibre cement
FOR APPLICATION TO:
Product Code: TAKT001
Contents: - 1lt primer, - 2½lt tanking paste, - 10m x 100mm jointing tape, - 1m² polyester matting.
Set Time: 24 hours
Coverage: Standard 2m shower
BUILDING PRODUCTSWe are stronger
- 11 -
PRODUCT GUIDE - PREPARATION PRODUCTS
PRODUCT GUIDE - PREPARATION PRODUCTS
Sealing & Decoupling MembraneA flexible, wall & floor, waterproofing, crack covering and decoupling membrane. 100% waterproof and has a crack covering effect and thereby provides a high level of safety against cracks that may later appear in screeds and floor structures.
Showers
Bathrooms
Wetrooms
Balconies
Pool Areas
Patios
Solid Substrates
Subject to Cracking
FOR APPLICATION TO:
Product Code: PROL001
Thickness: approx. 0.4mm
Size: 1m x 30m
Material: Polyethylene film laminatedboth sides with PP fleece layers
Sealing TapeSealing tape for use with the Sealing & Decoupling Membrane or for waterproofing joints between substrates and/or boards e.g. Tile Backer Boards.
Showers
Bathrooms
Wetrooms
Balconies
Pool Areas
Patios
Laundries
Hospitals
FOR APPLICATION TO:
Product Code: PROL002
Thickness: approx. 0.7mm
Size: 120mm x 10m
Material: Tri-laminate with fleece backing both sides
BUILDING PRODUCTSWe are stronger
BUILDING PRODUCTSWe are stronger
- 12 -
PRODUCT GUIDE - PREPARATION PRODUCTS
PRODUCT GUIDE - PREPARATION PRODUCTS
Self Adhesive Sealing TapeSelf-adhesive, extreme bonding strength, sealing tape for use with the Sealing & Decoupling Membrane or for waterproofing joints between substrates and/or boards e.g. Tile Backer Boards.
Product Code: PROL003
Thickness: approx. 0.5mm
Size: 100mm x 10m
Material: Self-adhesive butyl rubber with tear resistant fleece backing
Internal CornerInternal corner piece for use with the Sealing & Decoupling Membrane.
Product Code: PROL004
Thickness: approx. 0.7mm
Leg Size: 120mm
Material: Tri-laminate with fleece backing both sides
Showers
Bathrooms
Wetrooms
Balconies
Pool Areas
Patios
Laundries
Hospitals
FOR APPLICATION TO:
Showers
Bathrooms
Wetrooms
Balconies
Pool Areas
Patios
Laundries
Hospitals
FOR APPLICATION TO:
External CornerExternal corner piece for use with the Sealing & Decoupling Membrane.
Product Code: PROL005
Thickness: approx. 0.7mm
Leg Size: 110mm
Material: Tri-laminate with fleece backing both sides
BUILDING PRODUCTSWe are stronger
- 13 -
PRODUCT GUIDE - PREPARATION PRODUCTS
PRODUCT GUIDE - PREPARATION PRODUCTS
Wall & Floor CollarFor use with the Sealing & Decoupling Membrane.
Showers
Bathrooms
Wetrooms
Balconies
Pool Areas
Patios
Laundries
Hospitals
FOR APPLICATION TO:
Product Code: 120mm x 120mm - PROL006 425mm x 425mm - PROL007
Thickness: approx. 0.5mm
Wall Size: 120mm x 120mmFloor Size: 425mm x 425mm
Material: Tri-laminate with fleece backing both sides
Tile Backer BoardWaterproof, sturdy, thermally insulating, low weight, compression proof and easy to work with.
Walls
Floors
Solid
Substrates
Rigid Framework Plasterboard
FOR APPLICATION TO:
BUILDING PRODUCTSWe are stronger
Product Code: 4mm x 1250 x 600 - MTBB001 MTBB0026mm x 1250 x 600 - MTBB00310mm x 1250 x 600 - MTBB00412.5mm x 1250 x 600 - MTBB00520mm x 1250 x 600 - MTBB00650mm x 1250 x 600 -
Thickness: Various
Size: 1250mm x 600m
Material: XPS inner core
BUILDING PRODUCTSWe are stronger
- 14 -
PRODUCT GUIDE - PREPARATION PRODUCTS
PRODUCT GUIDE - PREPARATION PRODUCTS
Sloping BoardMade of same material as standard boards. Slopes from 33mm to 10mm. Ideal for wetrooms with drainage along the edge of wall.
Also for external balconies.
Showers
Bathrooms
Wetrooms
Balconies
Pool Areas
Patios
Laundries
Hospitals
FOR APPLICATION TO:
Product Code: MTBB007
Thickness: 33mm - 10mm
Size: 1200mm x 1200mm
Material: XPS inner core
Shower BasesAn extruded polystyrene foam core sandwiched between mortar / fibreglass outer layers. Waterproof, sturdy, thermally insulating, low weight, compression proof and easy to work with.
Use on concrete or wooden floors to create a fully waterproof shower area.
Timber Floors Concrete Floors
FOR APPLICATION TO:
BUILDING PRODUCTSWe are stronger
BUILDING PRODUCTSWe are stronger
- 15 -
SIZE DRAIN PRODUCT CODE800 x 800 x 20mm900 x 900 x 20mm1000 x 1000 x 20mm1000 x 1000 x 20mm1200 x 900 x 20mm1200 x 900 x 20mm1200 x 1200 x 20mm1200 x 1200 x 20mm1300 x 800 x 20mm1500 x 800 x 24mm1500 x 1500 x 24mm1850 x 900 x 24mm
CentreCentreCentreOff-setCentreOff-setCentreOff-setOff-setOff-setCentreOff-set
MTSL001MTSL002MTSL003MTSL004MTSL005MTSL006MTSL007MTSL008MTSL009
MTSL0010MTSL0011MTSL0012
PRODUCT GUIDE - PREPARATION PRODUCTS
Shower Base DrainHorizontal drain for use with Shower Bases.
Shower Bases
FOR APPLICATION TO:
Product Code: MTDR001
Flow Rate: 30lt/min.
BUILDING PRODUCTSWe are stronger
PRODUCT GUIDE - PREPARATION PRODUCTS
Tile Backer Board WashersFor installation of backer boards
Tile Backer Boards
FOR APPLICATION TO:
Product Code: BKWS001
Size: 35mm diameter.
BUILDING PRODUCTSWe are stronger
PRODUCT GUIDE - PREPARATION PRODUCTS
Tile Backer Board ScrewsFor use with washers for installation of backer boards.
BUILDING PRODUCTSWe are stronger
Packed: 200 per bag.
Packed: 1’s.
- 16 -
SIZE COLOUR QTY. PER BOX3.5mm x 32mm Black phosphate 1000
PRODUCT CODEMPBO001
Size: 3.5mm x 32mm
Packed: 1000 per box.
Tile Backer Boards
FOR APPLICATION TO:
PRODUCT GUIDE - PREPARATION PRODUCTS
Underfloor Heating Mats – 100W/m²Designed with an adhesive backed mesh which allows quick and easy application. Ultra efficient and maintenance free. 100W/m² recommended for wooden substrates.
Wooden Substrates
FOR APPLICATION TO:
BUILDING PRODUCTSWe are stronger
SIZE DESCRIPTION PRODUCT CODE2m x 0.5m3m x 0.5m4m x 0.5m5m x 0.5m6m x 0.5m7m x 0.5m8m x 0.5m9m x 0.5m
10m x 0.5m12m x 0.5m14m x 0.5m16m x 0.5m18m x 0.5m20m x 0.5m22m x 0.5m24m x 0.5m
1m² 100W1.5m² 150W2m² 200W
2.5m² 250W3m² 300W
3.5m² 350W4m² 400W
4.5m² 450W5m² 500W6m² 600W7m² 700W8m² 800W9m² 900W
10m² 1000W11m² 1100W12m² 1200W
UNHM029UNHM001UNHM002UNHM003UNHM004UNHM005UNHM006UNHM007UNHM008UNHM009UNHM010UNHM011UNHM012UNHM030UNHM031UNHM032
PRODUCT GUIDE - PREPARATION PRODUCTS
Underfloor Heating Mats – 150W/m²Designed with an adhesive backed mesh which allows quick and easy application. Ultra efficient and maintenance free. 150W/m² recommended for concrete substrates.
Concrete Substrates Tile Backer Boards Screeds
FOR APPLICATION TO:
BUILDING PRODUCTSWe are stronger
SIZE DESCRIPTION PRODUCT CODE2m x 0.5m3m x 0.5m4m x 0.5m5m x 0.5m6m x 0.5m7m x 0.5m8m x 0.5m9m x 0.5m
10m x 0.5m12m x 0.5m14m x 0.5m16m x 0.5m18m x 0.5m20m x 0.5m22m x 0.5m24m x 0.5m
1m² 150W1.5m² 225W2m² 300W
2.5m² 375W3m² 450W
3.5m² 525W4m² 600W
4.5m² 675W5m² 750W6m² 900W
7m² 1050W8m² 1200W9m² 1350W
10m² 1500W11m² 1650W12m² 1800W
UNHM013UNHM014UNHM015UNHM016UNHM017UNHM018UNHM019UNHM020UNHM021UNHM022UNHM023UNHM024UNHM025UNHM026UNHM027UNHM028
- 17 -
PRODUCT GUIDE - PREPARATION PRODUCTS
Digital Thermostat16A digital thermostat and timer for use with underfloor heating mats.
Product Code: UNHT001
Colour: White
PRODUCT GUIDE - PREPARATION PRODUCTS
Flexible ConduitFor protection of underfloor heating probe.
Product Code: UNHC001
Colour: Black
Size: 1m x 13mm
PRODUCT GUIDE - PREPARATION PRODUCTS
Multi-Pro Backer BoardMagnesium silicate board. Impact resistant, moisture & water resistant, A1 fire rated for wall & floor tiling.
Showers
Bathrooms
BalconiesPool Areas
Patios
Laundries
Hospitals
FOR APPLICATION TO:
SIZE COLOUR PRODUCT CODE1195 x 590 x 6mm1200 x 800 x 12mm
WhiteWhite
MPBO001MPBO002
BUILDING PRODUCTSWe are stronger
BUILDING PRODUCTSWe are stronger
BUILDING PRODUCTSWe are stronger
Heating Mats
FOR APPLICATION WITH:
Heating Mats
FOR APPLICATION WITH:
- 18 -
Tile on Rough Side of Boards
SIZE COLOUR PACKED10mm10mm12mm12mm
BlackDark Grey
Black Dark Grey
10’s10’s10’s10’s
PRODUCT CODEAMJG002AMJG001AMJG005AMJG003
PRODUCT GUIDE - FINISHING PRODUCTS
PRODUCT GUIDE - FINISHING PRODUCTS
Aluminium Expansion Joints Designed for use in medium to heavy duty traffic areas. The co-extruded flexible infill is manufactured in santoprene providing greater flexibility, chemical and weathering resistance.
Black Grey 10mm 12mm
INFILL COLOUR:
Edge Colour: Chrome
Infill Width: 9.8mm
Length: 2.5m
Profile: Aluminium
PROFILE DEPTH:
PVC Perimeter / Expansion Joints PVC profile with detachable anchor so it can be used as either a perimeter or movement joint.
Black Grey 10mm 12mm
INFILL COLOUR:
BUILDING PRODUCTSWe are stronger
Edge Colour: Black / Grey / Beige
Infill Width: 9mm
Length: 2.5m
Profile: PVC
PROFILE DEPTH:
Beige
BUILDING PRODUCTSWe are stronger
- 19 -
SIZE COLOUR PACKED10mm10mm10mm12mm12mm
BlackDark Grey
BeigeBlack
Dark Grey
25’s25’s25’s25’s25’s
PRODUCT CODEPMJG002PMJG003PJMG004PMJG004TTVJ001
PRODUCT GUIDE - FINISHING PRODUCTS
PRODUCT GUIDE - FINISHING PRODUCTS
Straight Edge Aluminium TrimAn L shaped extruded aluminium profile designed to protect the edges of tiles or similar hard finishes fitted in wall or floor installations.
Chrome
Brushed
Matt Silver 8mm
10mm
12mm
22.5mm
COLOUR FINISHES:
Profile Thickness: 3mm
Length: 2.5m
Profile: Aluminium
PROFILE DEPTH:
Round Edge Aluminium TrimAn extruded semi-round edge aluminium profile designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.
Chrome Gold 8mm
10mm
12mm
COLOUR FINISHES:
BUILDING PRODUCTSWe are stronger
Profile Thickness: 1.2mm
Length: 2.5m
Profile: Aluminium
PROFILE DEPTH:
BUILDING PRODUCTSWe are stronger
- 20 -
SIZE COLOUR PACKED8mm
10mm12mm
22.5mm8mm
ChromeChromeChromeChrome
Matt Silver
20’s20’s20’s20’s20’s
PRODUCT CODEARTT004ARTT005ARTT006TTBS004ARTT010
10mm12mm8mm
10mm12mm
Matt SilverMatt SilverBrushedBrushedBrushed
20’s20’s20’s20’s20’s
TTSE005TTSE006TTBA004TTBA005TTBA003
SIZE COLOUR PACKED8mm
10mm12mm8mm
10mm12mm
ChromeChromeChrome
GoldGoldGold
20’s20’s20’s20’s20’s
PRODUCT CODEARTT001ARTT002ARTT003TTGT002TTGT003TTGT00420’s
Straight Edge PVC Trim A straight edge alternative to round edge PVC profiles. Can also be used as a capping on the horizontal where skirting tiles have been fitted or where walls are not fully tiled.
White Soft Cream 10mm 12mm
COLOUR FINISH:
Profile Thickness: 3mm
Length: 2.5m
Profile: PVC
PROFILE DEPTH:
Round Edge PVC Trim
BUILDING PRODUCTSWe are stronger
It features overhang lips to better butt against the cushion edge of the ceramic tile, a second upright to support the face making it the most suitable trim for floor tile use.
White
Soft Cream
Black
Beige
6mm
8mm
10mm
12mm
COLOUR FINISH:
Profile Thickness: 1mm
Length: 2.5mProfile: PVC
PROFILE DEPTH:
BUILDING PRODUCTSWe are stronger
- 21 -
SIZE COLOUR PACKED10mm10mm12mm12mm
WhiteSoft Cream
WhiteSoft Cream
100’s100’s100’s100’s
PRODUCT CODETTSE001TTSE002TTSE003TTSE004
SIZE COLOUR PACKED6mm8mm
10mm12mm6mm8mm
10mm12mm6mm8mm
10mm12mm8mm
10mm12mm10mm12mm
WhiteWhiteWhiteWhiteIvoryIvoryIvoryIvory
Soft CreamSoft CreamSoft CreamSoft Cream
BlackBlackBlackBeigeBeige
100’s100’s100’s100’s100’s100’s100’s100’s100’s100’s100’s100’s100’s60’s60’s60’s60’s
PRODUCT CODETTDT001TTDT002TTDT003ARTT007TTDT004TTDT005TTDT006ARTT009TTDT007TTDT008TTDT009ARTT008TTPT008TTPT013TTPT015TTBE001TTVE002
Ivory
PRODUCT GUIDE - FINISHING PRODUCTS
PRODUCT GUIDE - FINISHING PRODUCTS
Aluminium Listello A flat aluminium feature strip that can be used between tiles or as a finishing edge.
Chrome 10mm 25mm
COLOUR FINISHES:
Product Code: 10mm X 7mm - TTBS001 TTBA00125mm x 7mm -
Profile Thickness: 1.2mm
Length: 2.5m
Profile: PVC
PROFILE WIDTH:
Depth: 7mm to fit all tiles
BUILDING PRODUCTSWe are stronger
Square Aluminium TrimCan be used as an edge trim on the vertical with wall tiles, on the horizontal with floor tiles or as a feature strip in wall or floor tiling applications.
Chrome Brushed 10mm 12mm
COLOUR FINISHES:
Profile Thickness: 1mm
Length: 2.5m
Profile: Aluminium
PROFILE DEPTH:
BUILDING PRODUCTSWe are stronger
SIZE COLOUR PACKED10mm10mm12mm12mm
ChromeBrushedChromeBrushed
10’s10’s10’s10’s
PRODUCT CODEALSQ002ALSQ001ALSQ003ALSQ004
PRODUCT GUIDE - FINISHING PRODUCTS
PRODUCT GUIDE - FINISHING PRODUCTS
- 22 -
White 20mm wide 19mm high
COLOUR FINISHES: PROFILE DEPTH:
Bath Seal TileoverCo extruded bath seal designed to bridge gaps. The thin back of the profile will not kick out the tile laid over the section.
White 23mm
COLOUR FINISHES:
Product Code: ATSE001
Profile Thickness: 1mm
Length: 1.8m
Profile: PVC
PROFILE WIDTH:
BUILDING PRODUCTSWe are stronger
Bath Seal Plus A co-extruded bath seal designed to be fixed into silicone. The profile can be either retro fitted or tiled over.
Product Code: ATSE002
Profile Thickness: 1.2mm
Length: 1.8m
Profile: PVC
Packed: 50’s
BUILDING PRODUCTSWe are stronger
PRODUCT GUIDE - FINISHING PRODUCTS
PRODUCT GUIDE - FINISHING PRODUCTS
- 23 -
Sanitary SiliconeSuperior grade silicone sealant with anti-fungal compounds to prevent mould growth in high humidity areas.
BUILDING PRODUCTSWe are stronger
Product Code: 310ml Clear - SSC0001SSW0001 310ml White -
SSI0001 310ml Ivory -
Set Time: 24 hours
Colours: Clear, White & Ivory
Glass
Ceramics
Sanitary Ware
Paint
Most Non-Porous Surfaces
FOR APPLICATION TO:
Arc Grout & Tile SealerCan be applied to damp grout & tiles. Penetrating protection.Does not alter the natural look. Interior & Exterior. 20 year protection
Marble
Natural Stone
Porcelain
SUITABLE FOR:
BUILDING PRODUCTSWe are stronger
Drying Time: 1 hour
Type: Penetrating Sealer & Protector
Coverage: 25m² (Depending on surface)
Finish: Clear Finish
Travertine
Terracotta
Granite
Slate
Limestone
Grout
Sandstone
Damp surfaces
Internal/external
Product Code: 600ml - UNR3I1
- 24 -
PRODUCT GUIDE - FINISHING PRODUCTS
PRODUCT GUIDE - FINISHING PRODUCTS
PRODUCT GUIDE - FINISHING PRODUCTS
PRODUCT GUIDE - FINISHING PRODUCTS
Stone SealerForms a waterproof and stain resistant protective layer.Colour enhancing with a soft satin shine.For Interior & Exterior use.
Granite & Marble ImpregnatorForms a waterproof and stain resistant protective layer.Suitable for all absorbent natural and artificial stonesand tiles. For Interior & Exterior use.
Slate
Polished Marble
Smooth Marble
Sandblasted Marble
SUITABLE FOR:
BUILDING PRODUCTSWe are stronger
Drying Time: 3-4 Hours
Type: Penetrating Sealer & Protector
Coverage: 10-25m² (1lt approx)
Finish: Clear & Invisible Finish
Product Code: 1lt - WETC002
Sandstone
Terrazzo
Concrete
Polished Porcelain
Smooth Porcelain
Sandblasted
Porcelain
Kitchen Counters
Granite
Grout
Slate
Absorbent
Stone
SUITABLE FOR:
Drying Time: 2 Hours
Type: Surface Sealer & Protector
Coverage: 15-20m²
Finish: Soft Satin Shine
Product Code: 1lt - WETC001
Marble
Sandstone
Terrazzo Concrete
SurfacesBUILDING PRODUCTS
We are stronger
- 25 -
PRODUCT GUIDE - FINISHING PRODUCTS
PRODUCT GUIDE - FINISHING PRODUCTS
Colour IntensifierForms a waterproof and stain resistant protective layer.Deepens and intensifies colour leaving an almost wet look. For Interior & Exterior use. Revives the natural texture. Suitable for all absorbent natural and artificial stones & tiles.
Tile & Stone Cleaner - AcidicFor acid resistant surfaces. Powerful, concentrated
cleaner for removal of stubborn dirt, calcium, urine
and water scale, limescale, light cement films,
rust etc.
Acid Resistant Tiles
Natural Stone
SUITABLE FOR:
BUILDING PRODUCTSWe are stronger
Type: Cleaner
Dilute: Up to 1:10
Product Code: 1lt - WETC004
Stoneware
Patios
Sanitary Ware
Chrome
Slate
SUITABLE FOR:
Drying Time: 1 Hour
Type: Surface Sealer & Protector
Coverage: 15-20m² (1lt approx)
Finish: Deepens & Intensifies Colour
Product Code: 1lt - WETC003
Marble Sandstone Terrazzo Concrete
Surfaces BUILDING PRODUCTSWe are stronger
- 26 -
PRODUCT GUIDE - FINISHING PRODUCTS
PRODUCT GUIDE - FINISHING PRODUCTS
Tile & Stone Cleaner - AlkalineFor alkaline resistant surfaces. Powerful, concentrated
cleaners for removal of stubborn dirt, old floor care residues,
polish films, wax, nicotine, fat encrustation, yellowing etc.
For alkaline resistant surfaces in interior and exterior areas.
Grout CleanerRemoves grease, dirt, residues of care products
and stubborn deposits. For the grouting of wall
and floor tiles indoors and outdoors. For ceramic
and natural stone tile grouting.
Natural Stone
SUITABLE FOR:
BUILDING PRODUCTSWe are stronger
Type: Cleaner
Product Code: 750ml - WECL008
Stoneware
Patios
Sanitary Ware
Chrome
Porcelain
SUITABLE FOR:
Type: Cleaner
Dilute: Up to 1:10
Product Code: 1lt - WETC005
Marble Granite Plastic PVC BUILDING PRODUCTSWe are stronger
- 27 -
Rubber Coverings
PRODUCT GUIDE - FINISHING PRODUCTS
PRODUCT GUIDE - FINISHING PRODUCTS
Cement Residue RemoverHighly effective concentrate. Quickly and easily removes
cement residue, mortar residue, lime deposits, efflorescence
and inorganic contamination.
For all acid-resitant surfaces.
Cement Residue For Marble & Natural StoneConcentrated. Gently and effectively removes cement residue, cement remains, grout residues, lime deposits and soiling from surfaces sensitive to acids. For mild cleaning of sensitive coatings. Interior & Exterior.
Natural Stone
SUITABLE FOR:
BUILDING PRODUCTSWe are stronger
Type: Cleaner
Dilute: Up to 1:10
Product Code: 1lt - WETC017
Stoneware Sanitary Ware
Acid Resistant Surfaces
SUITABLE FOR:
Type: Cleaner
Dilute: Up to 1:10
Product Code: 1lt - WETC018
BUILDING PRODUCTSWe are stronger
- 28 -
P
R
E
P
A
R
A
T
I
O
N
G
U
I
D
E
WALLS
FLOORS
SHOWERS
WET ROOM
BUILDING PRODUCTSWe are stronger
BUILDING PRODUCTSWe are stronger
Ä
Ä
Ä
Ä
PREPARATION - WALLS
Gypsum Plaster
A Plaster primed with Arc Tilers Primer
B Pro-Flex, T-20 or LT-33 Adhesive
C Arc Wall & Floor Grout
INSTALLATION GUIDELINES:
Allow 4 weeks minimum for new plaster to dry.
Ensure surface is free of any contaminants, loose dust or dirt.
Polished/shiny plaster must be brushed with a stiff brush.
Prime the plaster with Arc Tilers Primer diluted 3 parts water to 1 part primer followed by a second neat coat & allow to dry.
Maximum weight when tiling to plaster is 20kg per m² including tiles, adhesive and grout.
Any paint must be removed prior to tiling.
A
B
C
PREPARATION - WALLS
Gypsum Plasterboard
A Rigid framework
B Plasterboard primed with Arc Tilers Primer
C Pro-Flex, T-20 or LT-33 Adhesive
D Arc Wall & Floor Grout
INSTALLATION GUIDELINES:
Ensure the boards are fixed securely to the framework, ideally screwed at 300mm centres.
Ensure surface is free of any contaminants, loose dust or dirt.
Prime the plaster with Arc Tilers Primer diluted 3 parts water to 1 part primer followed by a second neat coat & allow to dry.
If the plasterboard is fixed to a timber frame, a flexible adhesive and grout must be used.Maximum weight when tiling to plasterboard is 32kg per m² including tiles, adhesive and grout.
Any paint must be removed prior to tiling.
A
B
C
D
BUILDING PRODUCTSWe are stronger
BUILDING PRODUCTSWe are stronger
- 29 -
PREPARATION - WALLS
Sand / Cement Render
A Sand/Cement render primed with Arc Tilers Primer
B Pro-Flex, T-20 or LT-33 Adhesive
C Arc Wall & Floor Grout
INSTALLATION GUIDELINES:
Allow 2 weeks minimum for new render to dry.
Ensure surface is free of any contaminants, loose dust or dirt.
Prime the render with Arc Tilers Primer diluted 3 parts water to 1 part primer & allow to dry.
If tiling externally, protect the tiled area from water ingressfor 24-48 hours.
PREPARATION - WALLS
Concrete Blocks
BUILDING PRODUCTSWe are stronger
A Block work primed with Arc Tilers Primer
B Pro-Flex, T-20 or LT-33 Adhesive
C Arc Wall & Floor Grout
INSTALLATION GUIDELINES:
New block work must be left for a minimum of 6 weeks before rendering or plastering.
Ensure surface is free of any contaminants, loose dust or dirt.
Prime the surface with Arc Tilers Primer diluted 3 parts water to 1 part primer & allow to dry.
If tiling directly to block work, ensure the wall is smooth faced.
If tiling externally, a flexible adhesive and grout must be used.
If tiling externally, protect the tiled area from water ingress for 24-48 hours.
A
B
C
A
B
C
BUILDING PRODUCTSWe are stronger
- 30 -
PREPARATION - WALLS
Existing Glazed Tiles / Bricks
A Existing tiles
B Tilers primer slurry coat
C Pro-Flex, T-20 or LT-33 Adhesive
D Arc Wall & Floor Grout
INSTALLATION GUIDELINES:
Ensure existing tiles are firm, stable and securely fixed.
Ensure surface is free of any contaminants, loose dust or dirt.
Prime the surface with Arc Tilers Primer diluted 1 part water to 1 part primer mixed with 1 part adhesive to form a brush on slurry.
Allow to dry before tiling.
PREPARATION - WALLS
Plywood / Calcium Silicate Boards
BUILDING PRODUCTSWe are stronger
A Rigid framework
B Plywood / calcium silicate board primed with Arc Tilers Primer
C Pro-Flex, T-20 or LT-33 Adhesive
D Arc Wall & Floor Grout
INSTALLATION GUIDELINES:
Ensure the boards are fixed securely to the framework, screwed at 300mm centres.
Ensure surface is free of any contaminants, loose dust or dirt.
Prime the boards with Arc Tilers Primer diluted 3 parts water to 1 part primer & allow to dry.
Use exterior grade or moisture resistant materials.
Approximate maximum tiling weight (dependent on board type and thickness) is 30kg per m² including tiles, adhesive and grout.
A B
CD
A
B
C
D
BUILDING PRODUCTSWe are stronger
- 31 -
PREPARATION - WALLS
Tile Backer Boards - Solid/Even Substrates
A Concrete / blockwork / render / brick
B Pro-Flex, T-20 or LT-33
C Tile backer board
INSTALLATION GUIDELINES:
Prime the substrate with Arc Tilers Primer diluted
as per label instructions.
Fix the backer board using a 3-6mm bed of
adhesive.
Use jointing tape over joints.
Allow the adhesive to cure before tiling
commences.
PREPARATION - WALLS
Tile Backer Boards - Rigid Framework
BUILDING PRODUCTSWe are stronger
A Rigid framework
B Tile backer board
C Jointing tape
INSTALLATION GUIDELINES:
Ensure the boards are fixed securely to the framework, screwed at 300mm centres.
Ensure surface is free of any contaminants, loose dust or dirt.
Use jointing tape over joints.
Approximate maximum tiling weight (dependent on board type and thickness) is 50kg per m² including tiles, adhesive and grout.
AB
C
D
D Jointing tape
E Pro-Flex, T-20 or LT-33
F Arc Wall & Floor Grout
E
D Pro-Flex, T-20 or LT-33
E Arc Wall & Floor Grout
A
B
C
D
E
F
BUILDING PRODUCTSWe are stronger
- 32 -
PREPARATION - FLOORS
Sand & Cement Screed
A Sand & cement screed primed with Tilers Primer
Rapid-Flex or LT-33 Rapid-Set adhesiveB
Arc Flexi-Grout or Arc Wall & Floor GroutC
INSTALLATION GUIDELINES:
New sand & cement screed must be left for a minimum of 4 weeks to dry sufficiently.
Remove any loose flaking layers and ensure surface is free of any contaminants, loose dust or dirt.
Prime the screed with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.
Very porous screeds may require more than one coat of primer.
PREPARATION - FLOORS
Concrete Base
BUILDING PRODUCTSWe are stronger
A Concrete base primed with Tilers Primer
Rapid-Flex or LT-33 Rapid-Set adhesiveB
Arc Flexi-Grout or Arc Wall & Floor GroutC
INSTALLATION GUIDELINES:
New concrete must be allowed a minimum of 6 weeks drying time. Allow 1 day per mm for an overall depth of 50mm and 2 days per mm for any depth above 50mm.
Remove any laitance from surface & ensure surface is free of any contaminants, loose dust or dirt.
Prime the base with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.
Very porous concrete may require more than one coat.
BUILDING PRODUCTSWe are stronger
- 33 -
C
B
A
C
B
A
PREPARATION - FLOORS
Anhydrite Screed
A Concrete base
Anhydrite screedB
2 coats of Tilers PrimerC
INSTALLATION GUIDELINES:
Anhydrite screed must be confirmed dry via consistent moisture readings. The residual moisture content must be less than 0.5%.
Remove any laitance from surface & ensure surface is free of any contaminants, loose dust or dirt.
Prime with 2 coats of Arc Tilers Primer, the first diluted 3 parts water to 1 part primer followed by a neat coat.
Allow to dry in between coats.
PREPARATION - FLOORS
Flooring Grade Asphalt & Bitumen
BUILDING PRODUCTSWe are stronger
A Arc Tilers Primer slurry coat
Rapid-Flex or LT-33 Rapid-Set adhesiveB
Arc Flexi-Grout or Arc Wall & Floor GroutC
INSTALLATION GUIDELINES:
Remove any surface contamination, loose dust or
dirt and ensure there are no signs of debonding or
hollowness.
Prime the surface with Arc Tilers Primer diluted 1
part water to 1 part primer mixed with 1 part
adhesive to form a brush on slurry.
Allow to dry before tiling.
D Rapid-Flex or LT-33 Rapid-Set adhesive
Arc Flexi-Grout or Arc Wall & Floor GroutE
BUILDING PRODUCTSWe are stronger
- 34 -
C
B
A
E
D
C
BA
PREPARATION - FLOORS
Existing Tiles
A Existing tiles
Arc Tilers Primer slurry coatB
Rapid-Flex or LT-33 Rapid-Set adhesiveC
Arc Flexi-Grout or Arc Wall & Floor GroutD
INSTALLATION GUIDELINES:
Ensure existing tiles are firmly bonded to the original substrate.
Remove any loose tiles and make good.
Remove any surface contamination, loose dust or dirt.
Prime the existing tiles with Arc Tilers Primer diluted 1 part water to 1 part primer mixed with 1 part adhesive to form a brush on slurry.
Allow to dry before tiling.
PREPARATION - FLOORS
Existing Vinyl Tiles / Vinyl Sheets
BUILDING PRODUCTSWe are stronger
A Existing vinyl
Arc Tilers Primer slurry coatB
Rapid-Flex or LT-33 Rapid-Set adhesiveC
Arc Flexi-Grout or Arc Wall & Floor GroutD
INSTALLATION GUIDELINES:
Ensure existing vinyl is firmly bonded to the original substrate.
Remove any loose vinyl tiles and make good.
Remove any surface contamination, loose dust or dirt.
Prime the existing vinyl with Arc Tilers Primer diluted 1 part water to 1 part primer mixed with 1 part adhesive to form a brush on slurry.
Allow to dry before tiling.
BUILDING PRODUCTSWe are stronger
- 35 -
A
B
C
D
D
C
B
A
PREPARATION - FLOORS
Tongue & Groove Floorboards -Plywood Overlay
A Floorboards
Plywood primed with Tilers PrimerB
Rapid-Flex or LT-33 Rapid-Set adhesiveC
Arc Flexi-Grout or Arc Wall & Floor GroutD
INSTALLATION GUIDELINES:
Plywood must be exterior grade and a minimum of 15mm.
Stagger the joints when fixing the plywood, leaving a 0.5mm to 1mm gap between boards.
Plywood must be screwed, not nailed, at 150mm centres.
Remove any surface contamination, loose dust or dirt.
Prime the plywood with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.
PREPARATION - FLOORS
Tongue & Groove Floorboards -Plastic Ply Overlay
BUILDING PRODUCTSWe are stronger
A Floorboards primed with Tilers Primer
Plastic PlyB
Rapid-Flex or LT-33 Rapid-Set adhesiveC
Arc Flexi-Grout or Arc Wall & Floor GroutD
INSTALLATION GUIDELINES:
Remove any surface contamination, loose dust or dirt.
Prime the floorboards with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.
Apply the self-adhesive Plastic Ply in a brick type pattern.
Apply tile adhesive ensuring all voids are filled.
See page 11 for more technical details on Plastic Ply Reinforcement Sheets.
BUILDING PRODUCTSWe are stronger
- 36 -
D
C
B
A
D
C
B
A
PREPARATION - FLOORS
Tile Backer Boards - Timber Floors
A Primed timber floor
Rapid-Flex or Rapid LT-33 B
Tile backer board C
INSTALLATION GUIDELINES:
Remove any surface contamination, loose dust or dirt.
Prime the timber floor with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.
Fix the backer boards with a thin 3 to 6mm bed of adhesive.
Screw fix the boards at 300mm centres.
Use jointing tape to reinforce joints.
PREPARATION - FLOORS
Tile Backer Boards - Concrete Floors
BUILDING PRODUCTSWe are stronger
Remove any surface contamination, loose dust or dirt.
New concrete must be allowed a minimum of 6 weeks drying time.
Prime the concrete floor with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.
Fix the backer boards with a thin 3 to 6mm bed of adhesive, ensuring full-surface bonding.
Use jointing tape to reinforce joints.
D Jointing tape
Rapid-Flex or Rapid LT-33E
Flexi or Wall & Floor GroutF
A Primed concrete floor
Rapid-Flex or Rapid LT-33 B
Tile backer board C
INSTALLATION GUIDELINES:
D Jointing tape
Rapid-Flex or Rapid LT-33E
Flexi or Wall & Floor Grout F
BUILDING PRODUCTSWe are stronger
- 37 -
F
B
A
C
D
E
F
E
C
D
A
B
PREPARATION - FLOORS
Electric Underfloor Heating
A Primed concrete or timber substrate
Rapid-Flex or Rapid LT-33B
Tile backer boardC
Underfloor heating D
INSTALLATION GUIDELINES:
Ensure existing substrate is firm, stable and in good condition.
Remove any surface contamination, loose dust or dirt.
Prime the concrete floor with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.
Fix the backer boards with a thin 3 to 6mm bed of adhesive.
Ensure the underfloor heating element / mat is taped down to the substrate.
Embed the underfloor heating element using flexible levelling compound.
Once cured, tile using Rapid-Flex or Rapid Lt-33.
Once complete, allow 7 days before switching the heating on, initially at a low temperature and then increase the temperature gradually by 5°C per day.
PREPARATION - FLOORS
Heated Screeds
BUILDING PRODUCTSWe are stronger
New sand / cement screeds must be left for a minimum of 4 weeks to dry sufficiently.
The cured screed should be heated gradually, no more than 5°C per day, to a maximum of 25°C and then maintain that temperature for 3 days before allowing it to cool down to room temperature.
Turn off the heating 24 hours prior to tiling, or in cold weather reduce to below 15°C.
Remove any loose flaking layers and ensure the surface is free from any contaminants, loose dust or dirt.
Prime the screed with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.
Very porous screeds may require more than one coat.
Once tiling is completed, allow 7 days before gradually increasing the temperature of the heating.
E Flexible levelling compound
Rapid-Flex or Rapid LT-33F
Flexi or Wall & Floor GroutG
A Primed screed
Rapid-Flex or LT-33 Rapid-Set adhesiveB
Arc Flexi-Grout or Arc Wall & Floor Grout C
INSTALLATION GUIDELINES:
BUILDING PRODUCTSWe are stronger
- 38 -
G
F
C
A
B
DE
C
B
A
PREPARATION - FLOORS
Decoupling Membrane
A Primed concrete or sand / cement screed
B Rapid-Flex or LT-33 Rapid-Set adhesive
C Decoupling membrane
Rapid-Flex or LT-33 Rapid-Set adhesiveD
E Arc Flexi-Grout or Arc Wall & Floor Grout
INSTALLATION GUIDELINES:
Ensure the original substrate is firm, stable and in good condition.
Remove any loose flaking layers and ensure the surface is free from any contaminants, loose dust or dirt.
Prime the substrate with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.
Apply a thin 3 to 6mm bed of adhesive and lay the decoupling membrane while the adhesive is still moist.
Allow the adhesive to cure before tiling commences.
See page 12 for more technical details on Sealing and Decoupling Membrane.
BUILDING PRODUCTSWe are stronger
- 39 -
E
D
CB
A
PREPARATION - SHOWER / WET ROOM
Tile Backer Boards & Showerlays
BUILDING PRODUCTSWe are stronger
Arc recommends the use of tile backer boards and showerlays for a rigid, 100% waterproof and problem free wall & floor tiling substrate.
See separate booklet for installation instructions.
Fully waterproof
Highly insulating
Fix to solid wall/timber
Ready to tile or plaster
Holds 62kg/m2 on walls
40 tonnes/m2 on floors
Lightweight to handle
Easy to cut
PREPARATION - SHOWER / WET ROOM
Waterproof Tanking System
A Substrate
PrimerB
Sealing TapeC
Tanking PasteD
Pro-Flex, T-20 or LT-33 AdhesiveE
Rapid-Flex or LT-33 Rapid-Set adhesiveF
Sealed Arc Wall & Floor GroutG
Sealed Arc Flexi-Grout or Arc Wall & Floor GroutH
Arc Sanitary Silicone I
INSTALLATION GUIDELINES:
Prime substrates with primer as per instructions on pack Apply tanking paste to all corners, joints, outlets etc.
Apply jointing tape over the above mentioned areas
Apply 2 coats of tanking paste to all surfaces. Allow first coat to dry before applying the second
Allow 24 hours before fixing tiles
PREPARATION - SHOWER / WET ROOM
Sealing Membrane
BUILDING PRODUCTSWe are stronger
Prime substrates with primer as per instructions in pack Stick Sealing Tape, Corners & Collars using adhesive or tanking paste
Apply thin bed of flexible adhesive and lay membrane ensuring there are no bubbles or creases
Once dry, tiling can commence
Please refer to the technical data sheet for full installation instructions.
A Primed Substrate
Flexible Tile AdhesiveB
Sealing Tape / Corner Pieces / Wall & Floor CollarsC
Waterproof MembraneD
Pro-Flex, T-20 or LT-33 AdhesiveE
Rapid-Flex or LT-33 Rapid-Set adhesiveF
Sealed Arc Wall & Floor GroutG
Sealed Arc Flexi-Grout or Arc Wall & Floor GroutH
INSTALLATION GUIDELINES:
BUILDING PRODUCTSWe are stronger
- 40 -
EUROPEAN STANDARDS
PRIMING GUIDE
EXPANSION JOINTS
BUILDING PRODUCTSWe are stronger
BUILDING PRODUCTSWe are stronger
T
E
C
H
N
I
C
A
L
G
U
I
D
E
Ä
Ä
Ä
C 1 Normal cement based adhesive
C 1F Fast setting cement based adhesive
C 1T Normal cement based adhesive with reduced slip
C 1E Normal cement based adhesive with extended open time
C 1TE Normal cement based adhesive with extended open time and reduced slip
C 1FT Fast setting cement based adhesive with reduced slip
C 2 Improved cement based adhesive with additional characteristics
C 2E Improved cement based adhesive with additional characteristics and extended open time
C 2F Improved fast setting cement based adhesive with additional characteristics
C 2T Improved cement based adhesive with additional characteristics and reduced slip
C 2TE Improved cement based adhesive with additional characteristics, reduced slip and extended open time
C 2FT Improved fast setting cement based adhesive with additional characteristics and reduced slip
D 1 Normal dispersion adhesive
D 1T Normal dispersion adhesive with reduced slip
D 2 Improved dispersion adhesive with additional characteristics
D 2T Improved dispersion adhesive with additional characteristics and reduced slip
D 2TE Improved dispersion adhesive with additional characteristics, reduced slip and extended open time
ADHESIVES UNDER BS EN 12004 :2001
Type Class Description
EUROPEAN STANDARDS
All Arc Tile Adhesives and Grouts are manufactured in accordance with European Standards and meet or exceed the standards for each classification.
EN12004 refers to the general classification for cement based adhesives categorised as Type C. Ready mixed or paste adhesives are categorised as dispersion adhesives Type D. Epoxy resin adhesives are categorised as reaction resin adhesives Type R.
EN12002 is the classification for cement based adhesives with degrees of flexibility or deformable characteristics categorised as Type C Class S.
EN13888 is the general classification for cement based grouts Type C Class G.
ADHESIVES UNDER BS EN 12002 :2002
C S1 Deformable adhesive
C S2 Highly deformable adhesive
Type Class Description
GROUTS UNDER BS EN 13888 :2002
CG 1 Cement based grout with normal characteristics
CG 2 Improved cement based grout with additional characteristics
Type Class Description
- 41 -
Plaster First coat diluted 1 part primer to 3 parts water and allow to dry, followed by a neat coat
Plasterboards First coat diluted 1 part primer to 3 parts water and allow to dry, followed by a neat coat
Sand / Cement Render Apply 1 coat diluted 1 part primer to 3 parts water
Brick / Block Apply 1 coat diluted 1 part primer to 3 parts water
Existing Tiles Apply one coat of slurry mix of 1 part primer to 1 part water to 1 part tile adhesive
Plywood Apply 1 coat diluted 1 part primer to 3 parts water
WALLS
SUBSTRATE PRIMING GUIDE
SUBSTRATE PRIMING GUIDE
Before tiling, the majority of wall and floor substrates will require priming.Substrates are primed for the following reasons:
To improve the adhesion of cement based products Reduce the porosity of porous substrates A slurry coat mix improves the adhesion to non porous surfaces Produce a barrier between calcium sulphate based surfaces and cement based adhesives to minimise the risk of chemical reaction
Arc Tiler’s Primer is a high quality styrene butadiene co-polymer emulsion for use as a primer, bonding agent and sealer.
Available in 1lt, 2.5lt and 5lt.
For detailed guidelines on the complete substrate preparation see pages 29 to 40.
FLOORS
SUBSTRATE PRIMING GUIDE
Sand / Cement Screed Apply 1 coat diluted 1 part primer to 3 parts water
Anhydrite Screed First coat diluted 1 part primer to 3 parts water and allow to dry, followed by a neat coat
Concrete Apply 1 coat diluted 1 part primer to 3 parts water
Plywood Apply 1 coat diluted 1 part primer to 3 parts water
Existing Tiles Apply one coat of slurry mix of 1 part primer to 1 part water to 1 part tile adhesive
Vinyl Tiles / Sheets Apply one coat of slurry mix of 1 part primer to 1 part water to 1 part tile adhesive
Asphalt & Bitumen Apply one coat of slurry mix of 1 part primer to 1 part water to 1 part tile adhesive
Fibreglass Apply one coat of slurry mix of 1 part primer to 1 part water to 1 part tile adhesive
Green Screed Apply 1 coat diluted 1 part primer to 3 parts water
- 42 -
Structural Versus Movement JointsStructural joints are physical gaps which divide a building into smaller sub sections accommodating differential movement between each sub section. Movement joints are small joints designed to absorb localised stresses.
Causes of MovementStructural: Structural settlement Structural deformation due to loading Drying shrinkage Ambient thermal gain and loss Wind loading Seismic events
Localised Movement: Drying shrinkage of localised adjacent substrates Small scale localised deformation such as creep Ambient thermal differentials Imposed thermal variations such as underfloor heating
Movement JointArc supply 2 types of movement joint:1. Optimax Aluminium Heavy Duty Aluminium (MSA). These movement joint profiles are designed to accommodate localised stresses within tiled floors. The aluminium side section of the profile offers protection to the tile edge while the santoprene infill offers outstanding flexibility, tensile strength and chemical and weathering resistance. The anchoring angles are aluminium grade 6063 T6, which is heat treated to increase tensile strength.2. PVC Movement & Perimeter Joint (MLB). This is a co-extruded PVC movement control joint designed to appear as discretely as a grout line whilst absorbing localised compression and expansion stresses. The PVC is resistant to most chemicals and detergents generally used in tiled applications. It has a detachable anchor which allows the joint to be used as a perimeter joint.
Positioning of Movement JointsThe theory is to create “tile fields” large enough to absorb differential movement between the substrate and the tile covering. Movement joints should be installed in certain areas to prevent tiles or grout from cracking or to prevent the tiles from tenting and becoming debonded from the substrate.
The exact positioning of movement joints is vital to them successfully protecting the installation. Industry guidelines suggest that the maximum tile field should be no more than 10 metres in each direction. In practice, depending on the individual application, it tends to be between 5 and 8 metres.
WHEN TO USE EXPANSION / PERIMETER JOINTSBased on BS 5385
(A) Any area greater than 2m x 1m where the tiling abuts walls requires perimeter joints as a minimum(B) For larger areas, the maximum distance between joints should not be greater than 8m in any direction
In addition movement joints should always be installed directly above
(1) Changes in the substrate(2) Structural joints in the substrate(3) Gaps in the substrate
InstallationEnsure the correct depth of movement profile is selected according to tile depth. Using a suitable notched trowel spread the tile adhesive onto the substrate and firmly bed the profile, ensuring the adhesive penetrates the holes in the flange and covers the anchoring legs. Best practice is for the profile to be about 1mm lower than the tile. A grout joint should be left between the tile and the profile.
EXPANSION JOINT GUIDE
- 43 -
NOTES:
NOTES:
NOTES:
BUILDING PRODUCTSWe are stronger