Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
Dubai Head Office:Tel: +971 4 706 9777Fax: +971 4 706 9787
Abu Dhabi Branch:Tel: +971 2 645 0107Fax: +971 2 645 0167
Saudi Arabia:Tel: +966 1 265 4551Fax: +966 1 265 4550
Email: [email protected] 50708, DubaiUnited Arab Emirates
SOUND ATTENUATORS
WE CONTROL
NOISE
index
>>
>>
1 - 7
8 - 10
RECTANGULAR ATTENUATORS – MODEL: PGL
CIRCULAR ATTENUATORS – MODELS: SILAX & SILAX-P
0101
SOUND ATTENUATORS
RECTANGULAR ATTENUATORS – MODEL: PGL
Ordering Key:
P G L A W HX X LRECTANGULAR SOUND
ATTENUATOR PGL MODEL
AIRWAY CODE: A,B,C,D,E OR F
SIZE: WIDTH X HEIGHT X LENGTH
CONSTRUCTION
DIMENSIONS:
- CASING: LOCK FORMED, PRE-GALVANISED STEEL SHEET OF 0.9mm THICKNESS. ALL FIXINGS ARE BY RIVETS.
- INSULATION : 2 INCH THICK ROCKWOOL FIBERS BOUND WITH THERMOSETTING BINDER FACED WITH VAPOR-RETARDANT ALUMINUM FOIL FROM ONE SIDE. AND COMPLIES WITH ASTM C612. NON COMBUSTIBLE (EN ISO 1182) 50 KG/M3 DENSITY (ASTM C303). FUNGI-RESISTANT (ASTM C665).
- FLANGES : ROLL FORMED DUCTO MATE 35mm FLANGES.
- SPLITTERS: GALVANISED SHEET. BENDED TO FORM CHANNEL SECTIONS, FIXED WITH RIVETS. PERFORATED SHEET OF 0.7MM THICKNESS IS USED TO COVER THE SPLITTERS.
0103
SOUND ATTENUATORS
RECTANGULAR ATTENUATORS – MODEL: PGL
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE B
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
2501621
5003140
1K3740
2K3136
4K2228
8K1821
OCTAVE BAND MEAN FREQUENCY (Hz)
6378
1251012
LENGTH
850
1150
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3000.530.710.90
1.091.271.45
1.631.811.99
2.17
6001.051.411.79
2.172.532.90
3.263.623.98
4.344.705.07
5.435.796.15
6.516.877.24
7.607.968.32
8.68
9001.572.122.68
3.263.804.34
4.885.435.97
6.517.057.60
8.148.689.22
9.7710.310.9
11.412.012.5
13.1
12002.092.823.57
4.345.075.79
6.517.247.96
8.689.4010.2
10.911.612.3
13.113.814.5
15.215.916.7
17.4
1500
3.534.47
5.436.337.24
8.149.049.95
10.911.812.7
13.614.515.4
16.317.218.1
19.019.920.8
21.7
1800
5.36
6.517.608.68
9.7710.912.0
13.114.115.2
16.317.418.5
19.620.621.7
22.823.925.0
26.1
2100
7.608.8610.2
11.412.714.0
15.216.517.8
19.020.321.6
22.824.125.3
26.627.929.1
30.4
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m mSTATIC INSERTION LOSS
2502530
5004650
1K5345
2K4143
4K3438
8K2427
OCTAVE BAND MEAN FREQUENCY (Hz)
6389
1251416
LENGTH
14501750
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3000.460.630.80
0.981.141.30
1.461.621.78
1.95
6000.921.251.59
1.952.272.59
2.923.243.57
3.894.214.54
4.865.185.51
5.836.166.48
6.807.137.45
7.77
9001.381.872.38
2.923.403.89
4.374.865.35
5.836.326.80
7.297.778.26
8.759.239.72
10.210.711.2
11.7
12001.832.493.18
3.894.545.18
5.836.487.13
7.778.429.07
9.7210.411.0
11.712.313.0
13.614.314.9
15.6
1500
3.113.97
4.865.676.48
7.298.108.91
9.7210.611.4
12.213.013.8
14.615.416.2
17.017.818.7*
19.5
1800
4.76
5.836.807.77
8.759.7210.7
11.712.713.6
14.615.616.6
17.518.519.5*
20.4*21.4*
2100
6.807.949.07
10.211.412.5
13.614.815.9
17.018.219.3*
20.4*21.6*
* SEE NOTE 7
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3000.420.570.73
0.891.041.19
1.341.481.63
1.78
6000.841.141.45
1.782.082.37
2.672.973.26
3.563.854.15
4.454.745.04
5.345.635.93
6.226.526.82
7.11
9001.261.712.18
2.673.113.56
4.004.454.89
5.345.786.22
6.677.117.56
8.008.448.89
9.339.7810.3
10.7
12001.672.282.90
3.564.154.74
5.345.936.52
7.117.708.30
8.899.4810.1
10.711.311.9
12.513.1*13.7*
14.3*
1500
2.843.63
4.455.195.93
6.677.418.15
8.899.6310.4
11.111.912.6
13.4*14.1*
1800
4.35
5.346.227.11
8.008.899.78
10.711.612.5
13.4*14.3*
2100
6.227.268.30
9.3310.411.4
12.513.5*
* SEE NOTE 7
HEIGHT
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m mSTATIC INSERTION LOSS
2503540
5005050
1K4850
2K4648
4K4347
8K3134
OCTAVE BAND MEAN FREQUENCY (Hz)
631011
1251922
LENGTH
20502350
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
7. Selection marked * are avilable only with the shorter attenuator
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.20
1.16
1.13
Duct to
Plenum
3.19
2.76
2.47
Plenum to
Plenum
3.38
2.92
2.60
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE A
STATIC INSERTION LOSS
2504044
5005050
1K5050
2K4546
4K4346
8K4143
OCTAVE BAND MEAN FREQUENCY (Hz)
631213
1252326
LENGTH
20502350
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m m
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
2501924
5003341
1K3841
2K3539
4K2733
8K2327
OCTAVE BAND MEAN FREQUENCY (Hz)
6378
1251114
LENGTH
850
1150
STATIC INSERTION LOSS
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m m
2502935
5004650
1K4446
2K4244
4K3739
8K3135
OCTAVE BAND MEAN FREQUENCY (Hz)
639
10
1251720
LENGTH
14501750
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
HEIGHT
* SEE NOTE 7
*SEE NOTE 7
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.15
1.13
1.10
Duct to
Plenum
2.78
2.51
2.26
Plenum to
Plenum
3.03
2.63
2.60
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
(mm)300400500
600
700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
2750.380.510.65
0.790.921.05
1.181.311.44
5500.761.021.29
1.571.832.09
2.352.622.88
3.143.403.66
3.924.184.44
4.704.975.23
5.495.75
8251.141.531.94
2.352.753.14
3.533.924.31
4.705.105.49
5.886.276.66
7.057.457.84
8.238.629.01
9.40
11001.522.042.58
3.143.664.18
4.705.235.75
6.276.797.32
7.848.368.88
9.409.9310.5
11.011.512.1
12.6
1375
2.553.23
3.924.575.23
5.886.537.18
7.848.499.14
9.8010.511.1
11.812.413.1
13.714.415.1
15.7
1650
3.87
4.705.496.27
7.057.848.62
9.4010.211.0
11.812.613.4
14.114.915.7
16.517.318.1
18.8
1925
4.52
5.496.407.32
8.239.1410.1
11.011.912.8
13.714.715.6
16.517.418.3
19.220.121.1
22.0
2200
6.277.328.36
9.4010.511.5
12.613.614.7
15.716.817.8
18.819.920.9
22.023.024.1
25.1*
2750.340.460.58
0.71
0.820.94
1.061.171.29
5500.680.911.16
1.41
1.641.88
2.112.352.58
2.813.053.28
3.523.753.98
4.224.454.69
4.925.16
8251.011.371.73
2.11
2.462.81
3.163.523.87
4.224.574.92
5.275.625.97
6.336.687.03
7.387.738.08
8.43
11001.351.822.31
2.81
3.283.75
4.224.695.16
5.626.096.56
7.037.507.96
8.438.909.37
9.8410.310.8
11.3
1375
2.282.89
3.52
4.104.69
5.275.866.44
7.037.618.20
8.789.379.96
10.611.211.7
12.312.913.5
14.1
1650
3.47
4.22
4.925.62
6.337.037.73
8.439.149.84
10.611.312.0
12.713.414.1
14.8*15.5*16.2*
16.9*
1925
4.04
4.92
5.746.56
7.388.209.02
9.8410.711.5
12.313.214.0
14.8*15.6*16.4*
17.2*
2200
5.62
6.567.50
8.439.3710.3
11.312.213.2
14.115.0*16.0*
16.9*
HEIGHT
(mm)
300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
275
0.310.420.53
0.650.750.86
0.971.071.18
550
0.620.831.06
1.291.501.71
1.932.142.36
2.572.783.00
3.213.433.64
3.854.074.28
4.494.71
825
0.921.251.58
1.932.252.57
2.893.213.53
3.854.174.49
4.825.145.46
5.786.106.42
6.747.067.38
7.70
1100
1.231.662.11
2.573.003.43
3.584.284.71
5.145.565.99
6.426.857.27
7.708.138.56
8.999.419.84
10.3*
1375
2.082.63
3.213.754.28
4.825.355.88
6.426.957.49
8.028.569.09
9.63*10.2*10.7*
11.3*
1650
3.16
3.854.495.14
5.786.427.06
7.708.348.99
9.6310.3*10.9*
1925
3.69
4.495.245.99
6.747.498.24
8.999.7310.5*
11.3*
2200
5.145.996.85
7.708.569.41
10.3*11.2*
0102
RECTANGULAR ATTENUATORS – MODEL: PGL
SOUND ATTENUATORS
7. Selection marked * are available only with the shorter attenuator
0103
SOUND ATTENUATORS
RECTANGULAR ATTENUATORS – MODEL: PGL
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE B
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
2501621
5003140
1K3740
2K3136
4K2228
8K1821
OCTAVE BAND MEAN FREQUENCY (Hz)
6378
1251012
LENGTH
850
1150
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3000.530.710.90
1.091.271.45
1.631.811.99
2.17
6001.051.411.79
2.172.532.90
3.263.623.98
4.344.705.07
5.435.796.15
6.516.877.24
7.607.968.32
8.68
9001.572.122.68
3.263.804.34
4.885.435.97
6.517.057.60
8.148.689.22
9.7710.310.9
11.412.012.5
13.1
12002.092.823.57
4.345.075.79
6.517.247.96
8.689.4010.2
10.911.612.3
13.113.814.5
15.215.916.7
17.4
1500
3.534.47
5.436.337.24
8.149.049.95
10.911.812.7
13.614.515.4
16.317.218.1
19.019.920.8
21.7
1800
5.36
6.517.608.68
9.7710.912.0
13.114.115.2
16.317.418.5
19.620.621.7
22.823.925.0
26.1
2100
7.608.8610.2
11.412.714.0
15.216.517.8
19.020.321.6
22.824.125.3
26.627.929.1
30.4
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m mSTATIC INSERTION LOSS
2502530
5004650
1K5345
2K4143
4K3438
8K2427
OCTAVE BAND MEAN FREQUENCY (Hz)
6389
1251416
LENGTH
14501750
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3000.460.630.80
0.981.141.30
1.461.621.78
1.95
6000.921.251.59
1.952.272.59
2.923.243.57
3.894.214.54
4.865.185.51
5.836.166.48
6.807.137.45
7.77
9001.381.872.38
2.923.403.89
4.374.865.35
5.836.326.80
7.297.778.26
8.759.239.72
10.210.711.2
11.7
12001.832.493.18
3.894.545.18
5.836.487.13
7.778.429.07
9.7210.411.0
11.712.313.0
13.614.314.9
15.6
1500
3.113.97
4.865.676.48
7.298.108.91
9.7210.611.4
12.213.013.8
14.615.416.2
17.017.818.7*
19.5
1800
4.76
5.836.807.77
8.759.7210.7
11.712.713.6
14.615.616.6
17.518.519.5*
20.4*21.4*
2100
6.807.949.07
10.211.412.5
13.614.815.9
17.018.219.3*
20.4*21.6*
* SEE NOTE 7
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3000.420.570.73
0.891.041.19
1.341.481.63
1.78
6000.841.141.45
1.782.082.37
2.672.973.26
3.563.854.15
4.454.745.04
5.345.635.93
6.226.526.82
7.11
9001.261.712.18
2.673.113.56
4.004.454.89
5.345.786.22
6.677.117.56
8.008.448.89
9.339.7810.3
10.7
12001.672.282.90
3.564.154.74
5.345.936.52
7.117.708.30
8.899.4810.1
10.711.311.9
12.513.1*13.7*
14.3*
1500
2.843.63
4.455.195.93
6.677.418.15
8.899.6310.4
11.111.912.6
13.4*14.1*
1800
4.35
5.346.227.11
8.008.899.78
10.711.612.5
13.4*14.3*
2100
6.227.268.30
9.3310.411.4
12.513.5*
* SEE NOTE 7
HEIGHT
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m mSTATIC INSERTION LOSS
2503540
5005050
1K4850
2K4648
4K4347
8K3134
OCTAVE BAND MEAN FREQUENCY (Hz)
631011
1251922
LENGTH
20502350
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.20
1.16
1.13
Duct to
Plenum
3.19
2.76
2.47
Plenum to
Plenum
3.38
2.92
2.60
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE A
STATIC INSERTION LOSS
2504044
5005050
1K5050
2K4546
4K4346
8K4143
OCTAVE BAND MEAN FREQUENCY (Hz)
631213
1252326
LENGTH
20502350
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m m
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
2501924
5003341
1K3841
2K3539
4K2733
8K2327
OCTAVE BAND MEAN FREQUENCY (Hz)
6378
1251114
LENGTH
850
1150
STATIC INSERTION LOSS
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m m
2502935
5004650
1K4446
2K4244
4K3739
8K3135
OCTAVE BAND MEAN FREQUENCY (Hz)
639
10
1251720
LENGTH
14501750
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
HEIGHT
* SEE NOTE 7
*SEE NOTE 7
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
7. Selection marked * are avilable only with the shorter attenuator
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.15
1.13
1.10
Duct to
Plenum
2.78
2.51
2.26
Plenum to
Plenum
3.03
2.63
2.60
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
(mm)300400500
600
700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
2750.380.510.65
0.790.921.05
1.181.311.44
5500.761.021.29
1.571.832.09
2.352.622.88
3.143.403.66
3.924.184.44
4.704.975.23
5.495.75
8251.141.531.94
2.352.753.14
3.533.924.31
4.705.105.49
5.886.276.66
7.057.457.84
8.238.629.01
9.40
11001.522.042.58
3.143.664.18
4.705.235.75
6.276.797.32
7.848.368.88
9.409.9310.5
11.011.512.1
12.6
1375
2.553.23
3.924.575.23
5.886.537.18
7.848.499.14
9.8010.511.1
11.812.413.1
13.714.415.1
15.7
1650
3.87
4.705.496.27
7.057.848.62
9.4010.211.0
11.812.613.4
14.114.915.7
16.517.318.1
18.8
1925
4.52
5.496.407.32
8.239.1410.1
11.011.912.8
13.714.715.6
16.517.418.3
19.220.121.1
22.0
2200
6.277.328.36
9.4010.511.5
12.613.614.7
15.716.817.8
18.819.920.9
22.023.024.1
25.1*
2750.340.460.58
0.71
0.820.94
1.061.171.29
5500.680.911.16
1.41
1.641.88
2.112.352.58
2.813.053.28
3.523.753.98
4.224.454.69
4.925.16
8251.011.371.73
2.11
2.462.81
3.163.523.87
4.224.574.92
5.275.625.97
6.336.687.03
7.387.738.08
8.43
11001.351.822.31
2.81
3.283.75
4.224.695.16
5.626.096.56
7.037.507.96
8.438.909.37
9.8410.310.8
11.3
1375
2.282.89
3.52
4.104.69
5.275.866.44
7.037.618.20
8.789.379.96
10.611.211.7
12.312.913.5
14.1
1650
3.47
4.22
4.925.62
6.337.037.73
8.439.149.84
10.611.312.0
12.713.414.1
14.8*15.5*16.2*
16.9*
1925
4.04
4.92
5.746.56
7.388.209.02
9.8410.711.5
12.313.214.0
14.8*15.6*16.4*
17.2*
2200
5.62
6.567.50
8.439.3710.3
11.312.213.2
14.115.0*16.0*
16.9*
HEIGHT
(mm)
300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
275
0.310.420.53
0.650.750.86
0.971.071.18
550
0.620.831.06
1.291.501.71
1.932.142.36
2.572.783.00
3.213.433.64
3.854.074.28
4.494.71
825
0.921.251.58
1.932.252.57
2.893.213.53
3.854.174.49
4.825.145.46
5.786.106.42
6.747.067.38
7.70
1100
1.231.662.11
2.573.003.43
3.584.284.71
5.145.565.99
6.426.857.27
7.708.138.56
8.999.419.84
10.3*
1375
2.082.63
3.213.754.28
4.825.355.88
6.426.957.49
8.028.569.09
9.63*10.2*10.7*
11.3*
1650
3.16
3.854.495.14
5.786.427.06
7.708.348.99
9.6310.3*10.9*
1925
3.69
4.495.245.99
6.747.498.24
8.999.7310.5*
11.3*
2200
5.145.996.85
7.708.569.41
10.3*11.2*
0102
RECTANGULAR ATTENUATORS – MODEL: PGL
SOUND ATTENUATORS
7. Selection marked * are available only with the shorter attenuator
0105
SOUND ATTENUATORS
RECTANGULAR ATTENUATORS – MODEL: PGL
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE D
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
7. Selection marked * are avilable only with the shorter attenuator
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.29
1.24
1.20
Duct to
Plenum
3.83
3.33
2.96
Plenum to
Plenum
4.10
3.54
3.15
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3500.831.131.45
1.782.072.37
2.662.963.25
3.553.844.14
7001.662.262.89
3.554.144.73
5.325.916.50
7.097.688.27
8.869.4510.1
10.711.311.9
12.413.013.6
14.2
10502.493.394.33
5.326.217.09
7.988.869.75
10.711.612.4
13.314.215.1
16.016.917.8
18.619.520.4
21.3
1400
4.525.78
7.098.279.45
10.711.913.0
14.215.416.6
17.818.920.1
21.322.523.7
24.826.027.2
28.4
1750
7.22
8.8610.411.9
13.314.816.3
17.819.220.7
22.223.725.1
26.628.129.6
31.032.534.0
35.5
2100
10.712.414.2
16.017.819.5
21.323.124.8
26.628.430.2
31.933.735.5
37.239.040.8
42.6
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3500.741.011.30
1.611.882.14
2.412.682.95
3.213.483.75
7001.472.022.60
3.213.754.28
4.825.355.89
6.426.967.49
8.035.569.10
9.6310.210.7
11.311.812.5
12.9
10502.213.033.89
4.825.626.42
7.238.038.83
9.6310.511.3
12.112.913.7
14.515.316.1
16.917.718.5
19.3
1400
4.045.19
6.427.498.56
9.6310.711.8
12.914.015.0
16.117.218.2
19.320.421.4
22.523.624.7
25.7
1750
6.49
8.039.3710.7
12.113.414.8
16.117.418.8
20.121.422.8
24.125.526.8*
28.1*29.5*30.8*
2100
9.6311.312.9
14.516.117.7
19.320.922.5
24.125.727.3*
28.9*30.5*
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
*SEE NOTE 7
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3500.680.931.20
1.481.731.97
2.222.462.71
2.963.203.45
7001.351.862.39
2.963.453.94
4.434.925.41
5.916.406.89
7.387.878.37
8.869.359.84
10.410.911.4
11.8
10502.032.783.58
4.435.175.91
6.647.388.12
8.869.6010.4
11.111.812.6
13.314.114.8
15.516.317.0
17.7
1400
3.714.77
5.916.897.87
8.869.8410.9
11.812.813.8
14.815.816.8
17.728.7*19.7*
1750
5.96
7.388.619.84
11.112.313.6
14.816.017.3
18.5*19.7*
2100
8.8610.411.8
13.314.816.3
17.719.2*
*SEE NOTE 7
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
2501418
5002231
1K3034
2K2328
4K1519
8K1213
OCTAVE BAND MEAN FREQUENCY (Hz)
6366
12579
LENGTH
850
1150
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m mSTATIC INSERTION LOSS
2502125
5003944
1K3943
2K3438
4K2429
8K1517
OCTAVE BAND MEAN FREQUENCY (Hz)
6377
1251114
LENGTH
14501750
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m mSTATIC INSERTION LOSS
2503034
5004850
1K4648
2K4246
4K3439
8K2022
OCTAVE BAND MEAN FREQUENCY (Hz)
6389
1251619
LENGTH
20502350
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE C
0104
RECTANGULAR ATTENUATORS – MODEL: PGL
SOUND ATTENUATORS
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3250.670.911.16
1.421.651.89
2.122.362.59
2.833.06
6501.331.812.31
2.833.303.77
4.244.715.18
5.656.126.59
7.077.548.01
8.488.959.42
9.8910.410.9
11.3
9752.002.723.46
4.244.955.65
6.367.077.77
8.489.189.89
10.611.312.0
12.813.514.2
14.915.616.3
17.0
1300
3.624.61
5.656.597.54
8.489.4210.4
11.312.313.2
14.215.116.0
17.017.918.9
19.820.821.7
22.6
1625
5.77
7.078.249.42
10.611.813.0
14.215.316.5
17.718.920.0
21.222.423.6
24.825.927.1
28.3
1950
6.92
8.489.8911.3
12.814.215.6
17.018.419.8
21.222.624.0
25.526.928.3
29.731.132.5
33.9
2275
9.8911.613.2
14.916.518.2
19.821.523.1
24.826.428.1
29.731.333.0
34.636.337.9*
39.6*
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
8K1516
OCTAVE BAND MEAN FREQUENCY (Hz)LENGTH
2501519
5002635
1K3237
2K2732
4K1824
6367
1259
10
850
1150
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m mSTATIC INSERTION LOSS
2502328
5004246
1K4143
2K3741
4K2833
8K1921
OCTAVE BAND MEAN FREQUENCY (Hz)
6378
1251215
LENGTH
14501750
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3250.600.821.04
1.281.491.70
1.911.122.33
2.552.76
6501.201.632.08
2.552.973.39
3.824.244.67
5.095.515.94
6.366.787.21
7.638.068.48
8.909.339.75
10.2
9751.792.443.11
3.824.455.09
5.736.367.00
7.638.278.90
9.5410.210.8
11.512.112.8
13.414.014.7
15.3
1300
3.254.15
5.095.946.78
7.638.489.33
10.211.111.9
12.813.614.4
15.316.117.0
17.818.719.5
20.4
1625
5.18
6.367.428.48
9.5410.611.7
12.813.814.9
15.917.018.1
19.120.221.2
22.323.324.4*
25.5*
1950
6.22
7.638.9010.2
11.512.814.0
15.310.617.8
19.120.421.7
22.9*24.2*25.5
26.7*
2275
8.9010.411.9
13.414.916.4
17.819.320.8
22.323.8*25.3*
26.7*
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
* SEE NOTE 7
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m mSTATIC INSERTION LOSS
2503237
5005050
1K4750
2K4447
4K3844
8K2428
OCTAVE BAND MEAN FREQUENCY (Hz)
6378
1259
10
LENGTH
20502350
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3250.540.540.95
1.171.361.56
1.751.952.14
2.342.53
6501.081.481.89
2.342.723.11
3.503.894.28
4.675.065.44
5.836.226.61
7.007.397.77
8.168.558.94
9.33
9751.622.22.84
3.504.084.67
5.255.836.41
7.007.588.16
8.759.339.91
10.511.111.7
12.312.913.4
14.0
1300
2.953.78
4.675.446.22
7.007.778.55
9.3310.110.9
11.712.513.3
14.014.815.6*
16.4*17.1*
1625
4.73
5.836.807.77
8.759.7210.7
11.712.713.6
14.615.6*16.6*
17.5*
1950
5.67
7.008.169.33
10.511.712.9
14.015.216.4*
17.5*
2275
8.169.5210.9
12.313.615.0
16.4*
HEIGHT
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
* SEE NOTE 7
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.25
1.20
1.17
Duct to
Plenum
3.48
3.01
2.69
Plenum to
Plenum
3.73
3.22
2.86
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
7. Selection marked * are available only with the shorter attenuator
0105
SOUND ATTENUATORS
RECTANGULAR ATTENUATORS – MODEL: PGL
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE D
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.29
1.24
1.20
Duct to
Plenum
3.83
3.33
2.96
Plenum to
Plenum
4.10
3.54
3.15
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3500.831.131.45
1.782.072.37
2.662.963.25
3.553.844.14
7001.662.262.89
3.554.144.73
5.325.916.50
7.097.688.27
8.869.4510.1
10.711.311.9
12.413.013.6
14.2
10502.493.394.33
5.326.217.09
7.988.869.75
10.711.612.4
13.314.215.1
16.016.917.8
18.619.520.4
21.3
1400
4.525.78
7.098.279.45
10.711.913.0
14.215.416.6
17.818.920.1
21.322.523.7
24.826.027.2
28.4
1750
7.22
8.8610.411.9
13.314.816.3
17.819.220.7
22.223.725.1
26.628.129.6
31.032.534.0
35.5
2100
10.712.414.2
16.017.819.5
21.323.124.8
26.628.430.2
31.933.735.5
37.239.040.8
42.6
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3500.741.011.30
1.611.882.14
2.412.682.95
3.213.483.75
7001.472.022.60
3.213.754.28
4.825.355.89
6.426.967.49
8.035.569.10
9.6310.210.7
11.311.812.5
12.9
10502.213.033.89
4.825.626.42
7.238.038.83
9.6310.511.3
12.112.913.7
14.515.316.1
16.917.718.5
19.3
1400
4.045.19
6.427.498.56
9.6310.711.8
12.914.015.0
16.117.218.2
19.320.421.4
22.523.624.7
25.7
1750
6.49
8.039.3710.7
12.113.414.8
16.117.418.8
20.121.422.8
24.125.526.8*
28.1*29.5*30.8*
2100
9.6311.312.9
14.516.117.7
19.320.922.5
24.125.727.3*
28.9*30.5*
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
*SEE NOTE 7
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3500.680.931.20
1.481.731.97
2.222.462.71
2.963.203.45
7001.351.862.39
2.963.453.94
4.434.925.41
5.916.406.89
7.387.878.37
8.869.359.84
10.410.911.4
11.8
10502.032.783.58
4.435.175.91
6.647.388.12
8.869.6010.4
11.111.812.6
13.314.114.8
15.516.317.0
17.7
1400
3.714.77
5.916.897.87
8.869.8410.9
11.812.813.8
14.815.816.8
17.728.7*19.7*
1750
5.96
7.388.619.84
11.112.313.6
14.816.017.3
18.5*19.7*
2100
8.8610.411.8
13.314.816.3
17.719.2*
*SEE NOTE 7
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
2501418
5002231
1K3034
2K2328
4K1519
8K1213
OCTAVE BAND MEAN FREQUENCY (Hz)
6366
12579
LENGTH
850
1150
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m mSTATIC INSERTION LOSS
2502125
5003944
1K3943
2K3438
4K2429
8K1517
OCTAVE BAND MEAN FREQUENCY (Hz)
6377
1251114
LENGTH
14501750
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m mSTATIC INSERTION LOSS
2503034
5004850
1K4648
2K4246
4K3439
8K2022
OCTAVE BAND MEAN FREQUENCY (Hz)
6389
1251619
LENGTH
20502350
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE C
0104
RECTANGULAR ATTENUATORS – MODEL: PGL
SOUND ATTENUATORS
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3250.670.911.16
1.421.651.89
2.122.362.59
2.833.06
6501.331.812.31
2.833.303.77
4.244.715.18
5.656.126.59
7.077.548.01
8.488.959.42
9.8910.410.9
11.3
9752.002.723.46
4.244.955.65
6.367.077.77
8.489.189.89
10.611.312.0
12.813.514.2
14.915.616.3
17.0
1300
3.624.61
5.656.597.54
8.489.4210.4
11.312.313.2
14.215.116.0
17.017.918.9
19.820.821.7
22.6
1625
5.77
7.078.249.42
10.611.813.0
14.215.316.5
17.718.920.0
21.222.423.6
24.825.927.1
28.3
1950
6.92
8.489.8911.3
12.814.215.6
17.018.419.8
21.222.624.0
25.526.928.3
29.731.132.5
33.9
2275
9.8911.613.2
14.916.518.2
19.821.523.1
24.826.428.1
29.731.333.0
34.636.337.9*
39.6*
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
8K1516
OCTAVE BAND MEAN FREQUENCY (Hz)LENGTH
2501519
5002635
1K3237
2K2732
4K1824
6367
1259
10
850
1150
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m mSTATIC INSERTION LOSS
2502328
5004246
1K4143
2K3741
4K2833
8K1921
OCTAVE BAND MEAN FREQUENCY (Hz)
6378
1251215
LENGTH
14501750
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3250.600.821.04
1.281.491.70
1.911.122.33
2.552.76
6501.201.632.08
2.552.973.39
3.824.244.67
5.095.515.94
6.366.787.21
7.638.068.48
8.909.339.75
10.2
9751.792.443.11
3.824.455.09
5.736.367.00
7.638.278.90
9.5410.210.8
11.512.112.8
13.414.014.7
15.3
1300
3.254.15
5.095.946.78
7.638.489.33
10.211.111.9
12.813.614.4
15.316.117.0
17.818.719.5
20.4
1625
5.18
6.367.428.48
9.5410.611.7
12.813.814.9
15.917.018.1
19.120.221.2
22.323.324.4*
25.5*
1950
6.22
7.638.9010.2
11.512.814.0
15.310.617.8
19.120.421.7
22.9*24.2*25.5
26.7*
2275
8.9010.411.9
13.414.916.4
17.819.320.8
22.323.8*25.3*
26.7*
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
* SEE NOTE 7
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m mSTATIC INSERTION LOSS
2503237
5005050
1K4750
2K4447
4K3844
8K2428
OCTAVE BAND MEAN FREQUENCY (Hz)
6378
1259
10
LENGTH
20502350
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3250.540.540.95
1.171.361.56
1.751.952.14
2.342.53
6501.081.481.89
2.342.723.11
3.503.894.28
4.675.065.44
5.836.226.61
7.007.397.77
8.168.558.94
9.33
9751.622.22.84
3.504.084.67
5.255.836.41
7.007.588.16
8.759.339.91
10.511.111.7
12.312.913.4
14.0
1300
2.953.78
4.675.446.22
7.007.778.55
9.3310.110.9
11.712.513.3
14.014.815.6*
16.4*17.1*
1625
4.73
5.836.807.77
8.759.7210.7
11.712.713.6
14.615.6*16.6*
17.5*
1950
5.67
7.008.169.33
10.511.712.9
14.015.216.4*
17.5*
2275
8.169.5210.9
12.313.615.0
16.4*
HEIGHT
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
* SEE NOTE 7
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
7. Selection marked * are avilable only with the shorter attenuator
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.25
1.20
1.17
Duct to
Plenum
3.48
3.01
2.69
Plenum to
Plenum
3.73
3.22
2.86
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
7. Selection marked * are available only with the shorter attenuator
0107
SOUND ATTENUATORS
RECTANGULAR ATTENUATORS – MODEL: PGL
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE F
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
7. Selection marked * are avilable only with the shorter attenuator
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.40
1.34
1.31
Duct to
Plenum
4.61
4.13
3.79
Plenum to
Plenum
5.03
4.50
4.12
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
4001.201.652.11
2.603.033.47
3.904.334.76
5.205.636.06
6.506.93
8002.413.294.21
5.206.066.93
7.798.669.52
10.411.312.2
13.013.914.8
15.616.517.3
18.219.119.9
20.8
12003.614.936.32
7.799.0910.4
11.713.014.3
15.616.918.2
19.520.822.1
23.424.726.0
27.328.629.9
31.2
1600
6.578.43
10.412.213.9
15.617.319.1
20.822.524.3
26.027.729.5
31.232.934.7
36.438.139.9
41.6
2000
10.6
13.015.217.3
19.521.723.8
26.028.230.3
32.534.736.8
39.041.243.3
45.547.649.8
52.0*
HEIGHT
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
4001.111.521.96
2.422.833.23
3.634.044.44
4.845.255.65
6.056.46
8002.223.043.91
4.845.656.46
7.268.078.88
9.6810.511.3
12.112.913.8
14.615.416.2
17.017.818.6
19.4
12003.324.565.86
7.268.479.68
10.912.113.3
14.615.817.0
18.219.420.6
21.823.024.2
25.426.727.9
29.1
1600
6.077.82
9.6811.312.9
14.616.217.8
19.421.022.6
24.225.827.5
29.130.732.3
33.935.5*37.1*
38.8*
2000
9.77
12.114.216.2
18.220.222.2
24.226.328.3
30.332.334.3
36.3*38.3*40.4*
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
HEIGHT
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
*SEE NOTE 7
4001.021.411.83
2.292.673.05
3.433.814.19
4.574.955.33
5.716.10
8002.042.813.66
4.575.336.10
6.867.628.38
9.149.9010.7
11.512.213.0
13.714.515.3
16.016.817.6
18.3
12003.064.225.48
6.868.009.14
10.311.512.6
13.714.916.0
17.218.319.5
20.621.722.9
24.025.2*26.3*
27.4*
1600
5.637.31
9.1410.712.2
13.715.316.8
18.319.821.4
22.924.4*25.9*
27.4
2000
9.13
11.513.415.3
17.219.121.0
22.924.8*26.7*
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
*SEE NOTE 7
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
2501216
5001824
1K2128
2K1621
4K1112
8K 7 8
OCTAVE BAND MEAN FREQUENCY (Hz)
6355
12568
LENGTH
850
1150
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m mSTATIC INSERTION LOSS
BAND MEAN FREQUENCY (Hz)
8K 910
OCTAVELENGTH
2502023
5003035
1K3539
2K2528
4K1415
6366
1251012
14501750
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m mSTATIC INSERTION LOSS
OCTAVE BAND MEAN FREQUENCY (Hz)LENGTH
4K1718
8K1011
2502730
5004045
1K4550
2K3236
6378
1251416
20502350
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE E
0106
RECTANGULAR ATTENUATORS – MODEL: PGL
SOUND ATTENUATORS
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.35
1.28
1.25
Duct to
Plenum
4.19
3.68
3.32
Plenum to
Plenum
4.53
3.96
3.56
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3750.921.261.61
1.992.322.65
2.983.313.64
3.974.304.63
4.96
7501.842.513.22
3.974.635.29
5.956.617.27
7.938.599.25
9.9110.611.3
11.912.613.2
13.914.615.2
15.9
11252.753.764.82
5.956.947.93
8.929.9110.9
11.912.913.9
14.915.916.9
17.918.919.9
20.821.822.8
23.8
1500
5.016.43
7.939.2510.6
11.913.214.6
15.917.218.5
19.921.222.5
23.825.126.5
27.829.130.4
31.7*
1875
8.03
9.9111.613.2
14.916.618.2
19.921.523.2
24.826.528.1
29.831.4*33.1
34.7*36.4*
2250
11.913.915.9
17.919.921.8
23.825.827.8
29.831.7*33.7*
35.7*
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
*SEE NOTE 7
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3751.011.381.76
2.172.532.89
3.253.613.97
4.334.695.06
5.42
7502.022.753.52
4.335.065.78
6.507.227.94
8.669.3910.1
10.911.612.3
13.013.814.5
15.215.916.6
17.4
11253.034.135.28
6.507.588.66
9.7510.911.9
13.014.115.2
16.317.418.4
19.520.621.7
22.823.924.9
26.0
1500
5.507.04
8.6610.111.6
13.014.515.9
17.418.820.2
21.723.124.6
26.027.528.9
30.431.833.2
34.7
1875
8.80
10.912.714.5
16.318.119.9
21.723.525.3
27.128.930.7
32.534.336.1
37.939.741.5
43.3
2250
13.015.217.4
19.521.723.9
26.028.230.4
32.534.736.8
39.041.243.3
45.547.749.8
52.0*
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
2501317
5002027
1K2631
2K2025
4K1315
8K910
OCTAVE BAND MEAN FREQUENCY (Hz)
6356
12578
LENGTH
850
1150
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m mSTATIC INSERTION LOSS
8K1213
OCTAVE BAND MEAN FREQUENCY (Hz)LENGTH
2502024
5003439
1K3740
2K2934
4K1822
6377
1251012
14501750
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3750.841.151.49
1.852.162.46
2.773.083.3.9
3.694.004.31
4.62
7501.672.302.97
3.694.314.92
5.546.156.77
7.388.008.61
9.239.8410.5
11.111.712.3
13.013.614.2
14.8
11252.513.454.45
5.546.467.38
8.309.2310.2
11.112.013.0
13.914.815.7
16.617.618.5
19.420.321.3*
22.2*
1500
4.595.94
7.388.619.84
11.112.313.6
14.816.017.3
18.519.720.9
22.2*23.4*
1875
7.42
9.2310.812.3
13.915.416.9
18.520.021.6*
23.1*
2250
11.113.014.8
16.618.520.3
22.2*24.0*
HEIGHT
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
*SEE NOTE 7
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m m
STATIC INSERTION LOSS
2502832
5004447
1K4550
2K3842
4K2528
8K1415
OCTAVE BAND MEAN FREQUENCY (Hz)
6378
1251517
LENGTH
20502350
7. Selection marked * are available only with the shorter attenuator
0107
SOUND ATTENUATORS
RECTANGULAR ATTENUATORS – MODEL: PGL
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE F
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.40
1.34
1.31
Duct to
Plenum
4.61
4.13
3.79
Plenum to
Plenum
5.03
4.50
4.12
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
4001.201.652.11
2.603.033.47
3.904.334.76
5.205.636.06
6.506.93
8002.413.294.21
5.206.066.93
7.798.669.52
10.411.312.2
13.013.914.8
15.616.517.3
18.219.119.9
20.8
12003.614.936.32
7.799.0910.4
11.713.014.3
15.616.918.2
19.520.822.1
23.424.726.0
27.328.629.9
31.2
1600
6.578.43
10.412.213.9
15.617.319.1
20.822.524.3
26.027.729.5
31.232.934.7
36.438.139.9
41.6
2000
10.6
13.015.217.3
19.521.723.8
26.028.230.3
32.534.736.8
39.041.243.3
45.547.649.8
52.0*
HEIGHT
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
4001.111.521.96
2.422.833.23
3.634.044.44
4.845.255.65
6.056.46
8002.223.043.91
4.845.656.46
7.268.078.88
9.6810.511.3
12.112.913.8
14.615.416.2
17.017.818.6
19.4
12003.324.565.86
7.268.479.68
10.912.113.3
14.615.817.0
18.219.420.6
21.823.024.2
25.426.727.9
29.1
1600
6.077.82
9.6811.312.9
14.616.217.8
19.421.022.6
24.225.827.5
29.130.732.3
33.935.5*37.1*
38.8*
2000
9.77
12.114.216.2
18.220.222.2
24.226.328.3
30.332.334.3
36.3*38.3*40.4*
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
HEIGHT
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
*SEE NOTE 7
4001.021.411.83
2.292.673.05
3.433.814.19
4.574.955.33
5.716.10
8002.042.813.66
4.575.336.10
6.867.628.38
9.149.9010.7
11.512.213.0
13.714.515.3
16.016.817.6
18.3
12003.064.225.48
6.868.009.14
10.311.512.6
13.714.916.0
17.218.319.5
20.621.722.9
24.025.2*26.3*
27.4*
1600
5.637.31
9.1410.712.2
13.715.316.8
18.319.821.4
22.924.4*25.9*
27.4
2000
9.13
11.513.415.3
17.219.121.0
22.924.8*26.7*
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
*SEE NOTE 7
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
2501216
5001824
1K2128
2K1621
4K1112
8K 7 8
OCTAVE BAND MEAN FREQUENCY (Hz)
6355
12568
LENGTH
850
1150
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m mSTATIC INSERTION LOSS
BAND MEAN FREQUENCY (Hz)
8K 910
OCTAVELENGTH
2502023
5003035
1K3539
2K2528
4K1415
6366
1251012
14501750
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m mSTATIC INSERTION LOSS
OCTAVE BAND MEAN FREQUENCY (Hz)LENGTH
4K1718
8K1011
2502730
5004045
1K4550
2K3236
6378
1251416
20502350
SERIES PGLLOW PRESSURE LOSS RECTANGULAR ATTENUATORS
ATTENUATOR PERFORMANCE - AIR WAY CODE E
0106
RECTANGULAR ATTENUATORS – MODEL: PGL
SOUND ATTENUATORS
NOTES:
1.
2.
3.
4.
5.
Tabulated volume flow rates will result at 60 Pa pressure losses for ducted
attenuators, at air density of 1.2 kg/m3
Pressure loss varies in proportion to density.
Pressure loss varies in proportion to the square of the volume flow rate.
Maximum allowable volume flow rate is 1,25* the values given in the tables,
pressure loss varying in proportion to the square of the factor.
Approximate regenerated noise levels.
Tabulated values apply to attenuators ducted both sides. For pelnum entry and/or
discharge the pressure loss is to be multiplied by the appropriate factor below.
Volume
7. Selection marked * are avilable only with the shorter attenuator
Length
850/1150
1450/1750
2050/2350
Plenum to
Duct
1.35
1.28
1.25
Duct to
Plenum
4.19
3.68
3.32
Plenum to
Plenum
4.53
3.96
3.56
Over 0.63 to 0.8 * Tabulated Values
Over 0.8 to 1.0 * Tabulated Values
Over 1.0 to 1.25 * Tabulated Values
30
35
40
35
40
45
Flow Rate NC A-Scale
6.
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3750.921.261.61
1.992.322.65
2.983.313.64
3.974.304.63
4.96
7501.842.513.22
3.974.635.29
5.956.617.27
7.938.599.25
9.9110.611.3
11.912.613.2
13.914.615.2
15.9
11252.753.764.82
5.956.947.93
8.929.9110.9
11.912.913.9
14.915.916.9
17.918.919.9
20.821.822.8
23.8
1500
5.016.43
7.939.2510.6
11.913.214.6
15.917.218.5
19.921.222.5
23.825.126.5
27.829.130.4
31.7*
1875
8.03
9.9111.613.2
14.916.618.2
19.921.523.2
24.826.528.1
29.831.4*33.1
34.7*36.4*
2250
11.913.915.9
17.919.921.8
23.825.827.8
29.831.7*33.7*
35.7*
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
*SEE NOTE 7
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3751.011.381.76
2.172.532.89
3.253.613.97
4.334.695.06
5.42
7502.022.753.52
4.335.065.78
6.507.227.94
8.669.3910.1
10.911.612.3
13.013.814.5
15.215.916.6
17.4
11253.034.135.28
6.507.588.66
9.7510.911.9
13.014.115.2
16.317.418.4
19.520.621.7
22.823.924.9
26.0
1500
5.507.04
8.6610.111.6
13.014.515.9
17.418.820.2
21.723.124.6
26.027.528.9
30.431.833.2
34.7
1875
8.80
10.912.714.5
16.318.119.9
21.723.525.3
27.128.930.7
32.534.336.1
37.939.741.5
43.3
2250
13.015.217.4
19.521.723.9
26.028.230.4
32.534.736.8
39.041.243.3
45.547.749.8
52.0*
HEIGHTTABLE OF VOLUME FLOW RATES (m³/s)
WIDTH (mm)
L e n g t h s 8 5 0 m m a n d 1 1 5 0 m mSTATIC INSERTION LOSS
2501317
5002027
1K2631
2K2025
4K1315
8K910
OCTAVE BAND MEAN FREQUENCY (Hz)
6356
12578
LENGTH
850
1150
L e n g t h s 1 4 5 0 m m a n d 1 7 5 0 m mSTATIC INSERTION LOSS
8K1213
OCTAVE BAND MEAN FREQUENCY (Hz)LENGTH
2502024
5003439
1K3740
2K2934
4K1822
6377
1251012
14501750
(mm)300400500
600700800
90010001100
120013001400
150016001700
180019002000
210022002300
2400
3750.841.151.49
1.852.162.46
2.773.083.3.9
3.694.004.31
4.62
7501.672.302.97
3.694.314.92
5.546.156.77
7.388.008.61
9.239.8410.5
11.111.712.3
13.013.614.2
14.8
11252.513.454.45
5.546.467.38
8.309.2310.2
11.112.013.0
13.914.815.7
16.617.618.5
19.420.321.3*
22.2*
1500
4.595.94
7.388.619.84
11.112.313.6
14.816.017.3
18.519.720.9
22.2*23.4*
1875
7.42
9.2310.812.3
13.915.416.9
18.520.021.6*
23.1*
2250
11.113.014.8
16.618.520.3
22.2*24.0*
HEIGHT
TABLE OF VOLUME FLOW RATES (m³/s)WIDTH (mm)
*SEE NOTE 7
L e n g t h s 2 0 5 0 m m a n d 2 3 5 0 m m
STATIC INSERTION LOSS
2502832
5004447
1K4550
2K3842
4K2528
8K1415
OCTAVE BAND MEAN FREQUENCY (Hz)
6378
1251517
LENGTH
20502350
7. Selection marked * are available only with the shorter attenuator
0109
SOUND ATTENUATORS
CIRCULAR ATTENUATORS – MODELS: SILAX & SLIAX-P
315
400
500
560
630
710
800
900
1000
1120
1250
1400
1600
1800
2000
315
400
500
560
630
710
800
900
1000
1120
1250
1400
1600
1800
2000
3
3
3
3
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
7
7
7
7
9
9
9
10
10
10
10
11
11
11
11
11
11
11
11
16
16
16
18
18
18
18
17
17
17
17
17
17
17
17
13
13
13
17
17
17
17
16
16
16
16
16
16
16
16
16
16
16
13
13
13
13
11
11
11
11
13
13
13
13
15
15
15
11
11
11
11
9
9
9
9
12
12
12
12
10
10
10
10
10
10
10
8
8
8
8
4
5
5
5
5
5
5
5
5
5
5
6
6
-
-
6
7
7
7
8
8
8
8
8
8
8
9
9
-
-
9
10
10
10
12
12
12
14
14
14
14
15
15
-
-
14
15
15
15
21
21
21
21
21
21
21
20
20
-
-
19
20
20
20
21
21
21
20
20
20
20
20
20
-
-
16
19
19
19
21
21
21
17
17
17
17
16
16
-
-
13
17
17
17
19
19
19
15
15
15
15
12
12
-
-
12
15
15
15
13
13
13
12
12
12
12
10
10
-
-
4
6
6
6
7
7
7
7
7
7
7
8
8
8
8
7
9
9
9
10
10
10
10
10
10
10
12
12
12
12
11
14
14
14
15
15
15
17
17
17
17
19
19
19
19
17
20
20
20
25
25
25
24
24
24
24
23
23
23
23
21
24
24
24
29
29
29
24
24
24
24
24
24
24
24
17
23
23
23
26
26
26
21
21
21
21
21
21
21
21
13
20
20
20
23
23
23
18
18
18
18
14
14
14
14
12
19
19
19
16
16
16
15
15
15
15
13
13
13
13
2
2
2
2
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
6
6
6
6
8
8
8
9
9
9
9
10
10
10
10
10
10
10
10
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
12
12
12
12
11
11
11
11
10
10
10
10
9
9
9
8
8
8
8
7
7
7
7
7
7
7
7
8
8
8
7
7
7
7
6
6
6
6
8
8
8
8
7
7
7
7
7
7
7
6
6
6
6
3
3
3
3
5
5
5
5
5
5
5
5
5
-
-
6
6
6
6
6
6
6
6
6
6
6
6
6
-
-
9
9
9
9
11
11
11
11
11
11
11
11
11
14
14
14
14
18
18
18
18
18
18
18
17
17
-
-
18
18
18
18
18
18
18
15
15
15
15
15
15
-
-
14
14
14
14
12
12
12
10
10
10
10
10
10
-
-
10
10
10
10
11
11
11
9
9
9
9
9
9
-
-
10
10
10
10
8
8
8
9
9
9
9
8
8
-
-
4
4
4
4
6
6
6
6
6
6
6
5
5
5
5
7
7
7
7
8
8
8
8
8
8
8
7
7
7
7
11
11
11
11
13
13
13
13
13
13
13
12
12
12
12
17
17
17
17
22
22
22
21
21
21
21
19
19
19
19
21
21
21
21
22
22
22
18
18
18
18
18
18
18
18
17
17
17
17
14
14
14
12
12
12
12
13
13
13
13
13
13
13
13
13
13
13
11
11
11
11
11
11
11
11
12
12
12
12
9
9
9
10
10
10
10
9
9
9
9
ACCUSTIC PERFORMANCE - Dynamic attenuation values in dB
FANSIZE 63 125 250 500 1k 2k 4k 8k 63 125 250 500 1k 2k 4k 8k 63 125 250 500 1k 2k 4k 8k
OCTAVE BAND MEAN FREQUENCY OCTAVE BAND MEAN FREQUENCY OCTAVE BAND MEAN FREQUENCY
SILAX (1.0 D) SILAX (1.5 D) SILAX (2 D)
FANSIZE 63 125 250 500 1k 2k 4k 8k 63 125 250 500 1k 2k 4k 8k 63 125 250 500 1k 2k 4k 8k
OCTAVE BAND MEAN FREQUENCY OCTAVE BAND MEAN FREQUENCY OCTAVE BAND MEAN FREQUENCY
SILAX - P (1.5 D)SILAX - P (1.0 D) SILAX - P (2 D)
0108
SERIES SILAX AND SILAX-P cylindrical attenuators have been designed for the purpose of reducing airborne fan noise from the inlet and/or discharge of axial flow fans. They are also suitable for installation on the inlet of centrifugal fans or in sections of ducting remote from the fans, Series SILAX and SILAX-P cylindrical attenuators are available in sizes suitable for fitting directly to all DONKIN axial flow fans.
Series SILAXSeries SILAX attenuators comprise outer casings incorporating acoustic materials retained between the casings and internal wire
mesh cylinders. Perforated steel internal cylinders have the same diameters as the nominal attenuator sizes, i.e. the size pf the fan or duct to which the attenuator is connected.
The incorporation of the central pod considerably improves the acoustic performance of the attenuator, but also creates a resistance to the flow of air. it is normal practice to select SILAX-P attenuators for a pressure loss not exceeding 60Pa.
SizesSeries SILAX and SILAX-P attenuators are available in a range of standard sizes matching all DONKIN axial flow fans from 315mm to 2000mm nominal diameter. The units are available in lengths of 1, 1.5 and 2.0 diameters. Non standard sizes will be manufactured to customer requirements.
CONSTRUCTION- Casings are constructed from pre-galvanised steel sheet in corporating lock formed seams. Standard casings are designed to with stand pressures up to 2500Pa.
- Flanges. Sizes up to and including 1000mm in diameter, incorporate spun flanges, manufactured from preglavanised steel sheet. threaded fastners are projection welded to the inside of the flanges. These flanges are primed and enamel painted prior to assembly.
- Acoustic materials. The acoustic infill in a patented sound absorbing material consisting of glass fibre material selected for the combination of density. Resilience and porosity, that achieves optimum broadband acoustic performance. This patented sound absorbing material satisfies the requirements of BS 476:Part7, class i spread of flame. Standard material limits the attenuator to be used at a maximum temperature of 80° C.- Inner Cylinder. The casing inner cylinder which retains the acoustic material is constructed from pre-galvanised perforated sheet
thickness of 0.7 mm.- Acoustic Pod (Series SILAX-P only)This pod comprises a cylinderconstructed from pre-galvanised sheet with a thiskness of 0.7 mm,to which are attached moulded fiberglass, or spun steel, fairings atboth ends, deisgned tp minimize the resistance to airflow. The pod is filled internally with patented acoustic material.
PERFORMANCE- Acoustic Performance. Dynamic Attenuation values are derived from tests conducted in accordance with BS 848. The Dynamic Attenuation values constitute the numerical difference between the sound power level of the fan with the attenuator replaced by a straight duct of equivalent length to the attenuator.
- Aerodynamic Performance. The pressure loss of Series SILAX attenuators can be considered as negligible for the range of velocities normally encountered in ventilation and air-conditioning systems. The pressure loss versus volume for the range of SILAX-P attenuators is illustrated graphically in this brochure. The pressure loss values are derived from tests conducted in accordance withBS 848, and are equal to the difference in fan performance resulting from the attachment of the attenuator.
OPTIONAL FEATURESVarious optional extras are available including;• Counter flanges.• Mounting feet.• Inlet cones & inlet cone Screens or standard screens• Special Paint Finishes.• Heavy Welded Construction for high pressures or rigorous industrial or mining applications.• High temperature construction i.e. above 80° C.• Melines / clean seal avialable for special / hospital applications.
All technical information contained herein is subject to changewithout prior notice.
equivalent size of DONKIN axial flow fans. Series SILAX
CIRCULAR ATTENUATORS – MODELS: SILAX & SILAX-P
SOUND ATTENUATORS
of air.
Series SILAX attenuators fit directly to the fans or ducts, by bolting to threaded fasteners integral with the attenuator flanges. The positions of these fasteners correspond to the flange drilling of the
attenuators cause a negligible resistance to the flow
Series SILAX-P
Series SILAX-P attenuators contain centrally mounted, cylindrical acoustic pods. The outer sections of the attenuators are identical to the Series SILAX attenuators. Removal of the pod from the SILAX-P attenuator converts the attenuator to a SILAX unit.
0109
315
400
500
560
630
710
800
900
1000
1120
1250
1400
1600
1800
2000
315
400
500
560
630
710
800
900
1000
1120
1250
1400
1600
1800
2000
3
3
3
3
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
7
7
7
7
9
9
9
10
10
10
10
11
11
11
11
11
11
11
11
16
16
16
18
18
18
18
17
17
17
17
17
17
17
17
13
13
13
17
17
17
17
16
16
16
16
16
16
16
16
16
16
16
13
13
13
13
11
11
11
11
13
13
13
13
15
15
15
11
11
11
11
9
9
9
9
12
12
12
12
10
10
10
10
10
10
10
8
8
8
8
4
5
5
5
5
5
5
5
5
5
5
6
6
-
-
6
7
7
7
8
8
8
8
8
8
8
9
9
-
-
9
10
10
10
12
12
12
14
14
14
14
15
15
-
-
14
15
15
15
21
21
21
21
21
21
21
20
20
-
-
19
20
20
20
21
21
21
20
20
20
20
20
20
-
-
16
19
19
19
21
21
21
17
17
17
17
16
16
-
-
13
17
17
17
19
19
19
15
15
15
15
12
12
-
-
12
15
15
15
13
13
13
12
12
12
12
10
10
-
-
4
6
6
6
7
7
7
7
7
7
7
8
8
8
8
7
9
9
9
10
10
10
10
10
10
10
12
12
12
12
11
14
14
14
15
15
15
17
17
17
17
19
19
19
19
17
20
20
20
25
25
25
24
24
24
24
23
23
23
23
21
24
24
24
29
29
29
24
24
24
24
24
24
24
24
17
23
23
23
26
26
26
21
21
21
21
21
21
21
21
13
20
20
20
23
23
23
18
18
18
18
14
14
14
14
12
19
19
19
16
16
16
15
15
15
15
13
13
13
13
2
2
2
2
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
6
6
6
6
8
8
8
9
9
9
9
10
10
10
10
10
10
10
10
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
12
12
12
12
11
11
11
11
10
10
10
10
9
9
9
8
8
8
8
7
7
7
7
7
7
7
7
8
8
8
7
7
7
7
6
6
6
6
8
8
8
8
7
7
7
7
7
7
7
6
6
6
6
3
3
3
3
5
5
5
5
5
5
5
5
5
-
-
6
6
6
6
6
6
6
6
6
6
6
6
6
-
-
9
9
9
9
11
11
11
11
11
11
11
11
11
14
14
14
14
18
18
18
18
18
18
18
17
17
-
-
18
18
18
18
18
18
18
15
15
15
15
15
15
-
-
14
14
14
14
12
12
12
10
10
10
10
10
10
-
-
10
10
10
10
11
11
11
9
9
9
9
9
9
-
-
10
10
10
10
8
8
8
9
9
9
9
8
8
-
-
4
4
4
4
6
6
6
6
6
6
6
5
5
5
5
7
7
7
7
8
8
8
8
8
8
8
7
7
7
7
11
11
11
11
13
13
13
13
13
13
13
12
12
12
12
17
17
17
17
22
22
22
21
21
21
21
19
19
19
19
21
21
21
21
22
22
22
18
18
18
18
18
18
18
18
17
17
17
17
14
14
14
12
12
12
12
13
13
13
13
13
13
13
13
13
13
13
11
11
11
11
11
11
11
11
12
12
12
12
9
9
9
10
10
10
10
9
9
9
9
ACCUSTIC PERFORMANCE - Dynamic attenuation values in dB
FANSIZE 63 125 250 500 1k 2k 4k 8k 63 125 250 500 1k 2k 4k 8k 63 125 250 500 1k 2k 4k 8k
OCTAVE BAND MEAN FREQUENCY OCTAVE BAND MEAN FREQUENCY OCTAVE BAND MEAN FREQUENCY
SILAX (1.0 D) SILAX (1.5 D) SILAX (2 D)
FANSIZE 63 125 250 500 1k 2k 4k 8k 63 125 250 500 1k 2k 4k 8k 63 125 250 500 1k 2k 4k 8k
OCTAVE BAND MEAN FREQUENCY OCTAVE BAND MEAN FREQUENCY OCTAVE BAND MEAN FREQUENCY
SILAX - P (1.5 D)SILAX - P (1.0 D) SILAX - P (2 D)
0108
CIRCULAR ATTENUATORS – MODELS: SILAX & SLIAX-P
SOUND ATTENUATORS
SERIES SILAX AND SILAX-P cylindrical attenuators have been designed for the purpose of reducing airborne fan noise from the inlet and/or discharge of axial flow fans. They are also suitable for installation on the inlet of centrifugal fans or in sections of ducting remote from the fans, Series SILAX and SILAX-P cylindrical attenuators are available in sizes suitable for fitting directly to all DONKIN axial flow fans.
Series SILAXSeries SILAX attenuators comprise outer casings incorporating acoustic materials retained between the casings and internal wire
mesh cylinders. Perforated steel internal cylinders have the same diameters as the nominal attenuator sizes, i.e. the size pf the fan or duct to which the attenuator is connected.
Series SILAX attenuators fit directly to the fans or ducts, by bolting to threaded fasteners integral with the attenuator flanges. Thepositions of these fasteners correspond to the flange drilling of the equivalent size of DONKIN axial flow fans. Series SILAX attenuators cause a neglibible resistance to the flow of air.
Series SILAX-PSeries SILAX-P attenuators contain cemtrally mounted, cylindrical acoustic pods. The outer sections of the attenuators are identical to the Series SILAX attenuators. Removal of the pod from the SILAX-P attenuator converts the attenuator to a SILAX unit.
The incorporation of the central pod considerably improves the acoustic performance of the attenuator, but also creates a resistance to the flow of air. it is normal practice to select SILAX-P attenuators for a pressure loss not exceeding 60Pa.
SizesSeries SILAX and SILAX-P attenuators are available in a range of standard sizes matching all DONKIN axial flow fans from 315mm to 2000mm nominal diameter. The units are available in lengths of 1, 1.5 and 2.0 diameters. Non standard sizes will be manufactured to customer requirements.
CONSTRUCTION- Casings are constructed from pre-galvanised steel sheet in corporating lock formed seams. Standard casings are designed to with stand pressures up to 2500Pa.
- Flanges. Sizes up to and including 1000mm in diameter, incorporate spun flanges, manufactured from preglavanised steel sheet. threaded fastners are projection welded to the inside of the flanges. These flanges are primed and enamel painted prior to assembly.
- Acoustic materials. The acoustic infill in a patented sound absorbing material consisting of glass fibre material selected for the combination of density. Resilience and porosity, that achieves optimum broadband acoustic performance. This patented sound absorbing material satisfies the requirements of BS 476:Part7, class i spread of flame. Standard material limits the attenuator to be used at a maximum temperature of 80° C.- Inner Cylinder. The casing inner cylinder which retains the acoustic material is constructed from pre-galvanised perforated sheet
thickness of 0.7 mm.- Acoustic Pod (Series SILAX-P only)This pod comprises a cylinderconstructed from pre-galvanised sheet with a thiskness of 0.7 mm,to which are attached moulded fiberglass, or spun steel, fairings atboth ends, deisgned tp minimize the resistance to airflow. The pod is filled internally with patented acoustic material.
PERFORMANCE- Acoustic Performance. Dynamic Attenuation values are derived from tests conducted in accordance with BS 848. The Dynamic Attenuation values constitute the numerical difference between the sound power level of the fan with the attenuator replaced by a straight duct of equivalent length to the attenuator.
- Aerodynamic Performance. The pressure loss of Series SILAX attenuators can be considered as negligible for the range of velocities normally encountered in ventilation and air-conditioning systems. The pressure loss versus volume for the range of SILAX-P attenuators is illustrated graphically in this brochure. The pressure loss values are derived from tests conducted in accordance withBS 848, and are equal to the difference in fan performance resulting from the attachment of the attenuator.
OPTIONAL FEATURESVarious optional extras are available including;• Counter flanges.• Mounting feet.• Inlet cones & inlet cone Screens or standard screens• Special Paint Finishes.• Heavy Welded Construction for high pressures or rigorous industrial or mining applications.• High temperature construction i.e. above 80° C.• Melines / clean seal avialable for special / hospital applications.
All technical information contained herein is subject to changewithout prior notice.
SOUND ATTENUATORS
CIRCULAR ATTENUATORS – MODELS: SILAX & SILAX-P
0110
315
400
500
560
630
710
800
900
1000
1120
1250
1400
1600
1800
2000
315
400
500
560
630
710
800
900
1000
1120
1250
1400
1600
1800
2000
475
600
750
840
945
1065
1200
1350
1500
1680
1875
2100
2400
-
-
630
800
1000
1120
1260
1420
1600
1800
2000
2240
2500
2800
3200
-
-
467
552
692
752
822
902
992
1092
1192
1312
1442
1592
1840
2043
2243
315
400
500
560
630
710
800
900
1000
1120
1250
1400
1600
1800
2000
8
8
12
12
12
16
16
16
16
20
20
20
24
24
24
8
10
10
10
10
10
10
12
12
12
12
12
16
16
16
355
450
560
620
690
770
860
970
1070
1190
1320
1470
1680
1880
2080
10
14
23
27
32
44
54
68
83
140
162
222
322
390
470
13
20
31
38
36
62
76
97
119
189
226
313
446
-
-
20
28
46
54
64
88
108
136
166
280
324
444
644
-
-
13
19
31
38
44
58
73
91
114
183
211
290
401
481
598
19
27
43
54
54
84
107
119
167
255
301
418
579
-
-
26
38
62
76
88
116
146
182
228
366
422
580
802
-
-
FANDia.mm
A1Dmm
A1.5Dmm
A2Dmm
B
mm
C
mm
D E
mm
F
mm
Silax1Dkg
Silax1.5Dkg
Silax2Dkg
Silax-P1Dkg
Silax-P1.5Dkg
Silax-P2Dkg
SILAX & SILAX-P CIRCULAR ATTENUATORS
DIMENSIONS & MASSES
CIRCULAR ATTENUATORS – MODELS: SILAX & SILAX-P
SOUND ATTENUATORS