Bottled Water

CANADIAN CLEAR

BALA ISOFTWAY 30/1/2015

Bottled Water Manufacturing Equipment for Washing, Filling and Capping

Canadian Clears Bottled Water Equipment has a wide range of variants which meet our client’s specific requirements of filling bottles of various sizes. They deliver bottles automatically washing, drying, filling, covering and capping them automatically. They ensure capping only when the bottles are filled up to the pre-decided level, and employ advanced PLC system and frequency conversion and speed control system. Touch screen functions enable easier operations. Our Bottled water manufacturing equipment is mainly used for bottling non-carbonated beverages, pure water and mineral water.

Bottled Water Manufacturing Equipment Processes - Washing, Filling and Capping

Bottled water manufacturing equipment solution includes machines for rinsing, filling, capping and sealing. The entire process is controlled by a PLC with sensor Controls with one touch instrumentation systems. The entire equipment is sleek and is capable of bottling various sizes of bottles. The mineral water pet bottles or carbonated mineral water bottles are fed into the Input Feed Conveyor after rinsing them. The bottles go automatically on the conveyor to the filling station.

Optic Sensors sense the bottles and allow only required amount of bottles to enter the filling station. Special pneumatic robots hold the bottles by the neck and body prior to the filling heads descending into the bottles. The filling is very accurate and is done by the neck and body prior to the filling heads descending into the bottles. Filling system is incorporated alternatively for counter pressure as well as volumetric filling. The filled bottles then go to a cap pickup system where they pick up caps before being capped in the capping station. A special vibratory cap feeder provides proper orientation to the caps. The capped bottles are then sent out to the discharge conveyor

THANK YOU

BOTTLE WATERS