We support What america builds. - Floor Jacks, Window ... Products Catalog_2014.pdf · We support What america builds. ... and support. Our vertically ... temporary support under

We support What america builds.

©Akron Products Company 2014

the best, made better still.

The performance of our products are superior in every respect;

they are not simply manufactured, but engineered in the most

sophisticated design, process automation and testing facilities in

the industry. Powder coated for ultimate protection and “green

by design.” And constantly refined for strength, with greater

structural integrity and thicker plates. Our evolving specifications

say it all.

And we don’t simply sell those products. We surround them with

equally advanced marketing,

merchandising, service

and support. Our vertically

integrated tube mills assure

the most consistent quality

and supply chain dependability, so

product by product, feature for feature,

The Akron Products Company can deliver

the reliability and innovation that builds

sales, profitability and long-term customer

satisfaction.

after 68 years as america’s leading manufacturer

of adjustable columns, posts and jacks, we’ve

learned one indelible truth: our business isn’t

simply about supporting floors, beams or joists –

it’s also about supporting you.

Our adjustable columns have an ICC-ES report (#1767) and a CCMC Listing 13250-L and 13269-L providing evidence of compliance with IBC and IRC.

Process AutomAtion

innovAtive engineering solutions

Precision mAnufActuring

verticAlly integrAted tube mill

The Akron Products Company | 330.576.1750 | www.AkronProducts.com


Double Carriage Bolt & Nut for added safety

Adjusting Screw SAE

BIG MOE FlOOr Jacks 24/5" OD Outside Tube, 2½" OD Inside Tube; 3/16" x 4"x 6" Plates

11 Ga. adjuStMEnt RanGE uPC COMPRESSIOn LOad RanGE* WEIGht unIt CuBE

BIG MOE 4' 8" - 8' 4" / 56"-100" 7-16733-12841-538,000 lbs.

to 20,000 lbs.31 lbs. 0.5

*Compression load is testing to the point of failure. Maximum loads are obtained at minimum extension. To determine safe or allowable loads, consult a licensed engineer.

biG mOe FlOOr JaCKour strongest jack for secure temporary support under the heaviest load areas.

cOMprEssIOn lOad ranGE*

38,000 lbs. to 20,000 lbs.

designed for heavy load areas, with added strength in every component:• 11 gauge inside/outside high carbon steel tubes• Heavy gauge steel plates• Double carriage bolt design for added safety• Corrosion-resistant coating inside & out• Zinc-coated secure bolt/nut connectors• Adjustment range from 4' 8" to 8' 4"

• Temporary support for room additions & remodeling projects, with the strength to support large appliances

• Easy to adjust, easy to install• Can be used permanently as secondary support

along with the approved primary support

Heavy Gauge Steel Plate



FlOOr Jacks 2½" OD Outside Tube, 2¼" OD Inside Tube; 3/32" x 4"x 5" Plates

15 Ga. adjuStMEnt RanGE uPCCOMPRESSIOn LOad RanGE*

WEIGht unIt CuBE

C-84 4' 8" - 8' 4" / 56"-100" 7-16733-13840-7 18,000 lbs. to 9,100 lbs. 18 lbs. 0.5C-79 4' 6" - 7' 9" / 54"-93" 7-16733-13790-5 18,000 lbs. to 11.350 lbs. 16 lbs. 0.4C-2 2' 10" - 4' 7" / 34"-55" 7-16733-13020-3 18,000 lbs. to 14,000 lbs. 11 lbs. 0.3C-3 1' 7" - 3' / 19"-36" 7-16733-13030-2 18,000 lbs. to 16,000 lbs. 8 lbs. 0.2C-4 1' 0" - 1' 3" / 12"-15" 7-16733-13040-1 18,000 lbs. 4 lbs. 0.1

C-42 (Two Pack C-4's) 1' 0" - 1' 3" / 12"-15" 7-16733-13420-1 18,000 lbs. 8 lbs. .02*Compression load is testing to the point of failure. Maximum loads are obtained at minimum extension. To determine safe or allowable loads, consult a licensed engineer.

FlOOr JaCKsadvanced features set the standard for temporary support

easy to adjust, easy to install, incredibly adaptable temporary support while mending, replacing or installing primary structural supports.• Designed with multiple features

for added safety• Can be used permanently as secondary

support (example: sagging floors)

jacks can be used as temporary support

while making structural repairs.



Note: Floor Jacks are for use in projects as temporary or additional support. Not intended for permanent, primary support. Our jacks are tools that can be used to make remodeling and repair projects easier and achieve a more professional result.

Galvanized Plate embossed to prevent dishing and movement of post

Immersion Dipped heavy coating inside and out to prevent corrosion

Double Carriage Bolt & Nut for added safety

Galvanized Plate Embossed to prevent dishing

adjusting screw SaE

flush adjusting steel nut

with pilot into tube provides extra safety

against accidental side pressure.

Inside/Outside Tube ConstructionHeavy duty high

carbon steel

Adjusting Holes4 sets on outside tube

spaced 3" apart for easy, secure height

adjustment

FlOOr JaCK

FlOOr Jack dIsplaY/assOrTMEnT – Jrd02a(Includes products below + Display Rack)MOdEL# adjuStMEnt thICknESS uPC Qty.C-84 4’ 8" to 8’ 4" 15 Gauge 1-16733-13840-7 4C-79 4’ 6" to 7’ 9" 15 Gauge 1-16733-13790-5 4C-2 2’ 10" to 4’ 7" 15 Gauge 1-16733-13020-3 4C-3 1’ 7" to 3’ 0" 15 Gauge 1-16733-13030-2 4Display Merchandiser with Sign 1

NEW HEAvIEr GAuGE STEEl PlATE

All Steel • AdjuStAble • eASy to InStAll

ideal temporary support for:• Room additions• Porches and decks• Remodeling projects• Sagging floors• Under stairs• Attics• Basement beams• Under kitchen areas with granite

counters & heavy appliances



1. Place the flat side of one of the plates on footing. Put the larger diameter post over the plate with the holes oriented at the top (Figure ➊). Reverse for shorter applications. For 12"-15" Jack skip steps 2 and 3.

2. Insert the smaller diameter post inside the larger diameter post. The hole end of the smaller diameter tube is required to be inserted into the outer diameter tube (Figure ➋).

a. Note: For shorter heights, the holes of the larger diameter tube will be at the bottom (i.e. near the footer).

3. Lift the smaller diameter post to provide the tallest assembly height achievable for the given conditions. With the holes aligned between the outside and inside tube, install two carriage bolts through the aligned holes and install the acorn nuts onto the threaded portion of the carriage bolts (Figure ➌).

a. Note: It is imperative that both carriage bolts are installed through the holes of the inside and outside tubing.

4. With the adjusting screw and nut, turn the round nut to the top of the threads of the adjusting screw. Place the adjustment screw on top of the smaller diameter post. The tapered side of the nut will fit into the smaller diameter post with the shoulder of the nut resting on top of the post (Figure ➍).

a. Note: If the assembly was installed too high, it may prevent the installation of the adjusting nut and screw. If this is the case, go back to step 3 and readjust the assembly.

5. Place the other plate on top of the adjusting screw with the flat side of the plate facing up and use an adjustable wrench to complete the fine adjustment (Figure ➎).

Note:

• For best support under wooden structures place the larger diameter tube and plate up against the wooden support (Figure ➏)

• Make sure post is centered under beam and is vertically plumb (straight)

• Secure plates with proper nails, screws or bolts.

• To correct sagging floors, place beam under joists and hold in place with two Telescoping Jacks. Adjust the floor jacks one-half turn each week over several weeks.

• Telescoping jacks should be used as additional support, not the primary means of support.

• When used in a lifting application consult a licensed engineer to determine safe allowable load.

➎

➍

➋

➌

➊

PLATE

ROuND NuT

ADJuSTING SCREW

SMALL DIAMETER

POST

CARRIAGE BOLTS AND NuTS

LARGE DIAMETER

POST

PLATE

➎ ➏

FlOOr JaCKiNstallatiON iNstruCtiONs

➎ ➏



1. Coloque la cara plana de una de las placas sobre la base. Coloque el poste de mayor diámetro sobre la placa, con los orificios en la parte superior (Figura ➊). Invierta para aplicaciones más cortas. Para soportes de 12 in a 15 in, saltee los pasos 2 y 3.

2. Introduzca el poste de menor diámetro dentro del poste de mayor diámetro. El extremo del tubo de menor diámetro que tiene orificios debe introducirse en el tubo de diámetro externo (Figure ➋).

a. Nota: para alturas menores, los orificios del tubo de mayor diámetro estarán en la parte inferior (es decir, cerca de la base).

3. Levante el poste de menor diámetro hasta alcanzar la máxima altura de montaje posible para las condiciones dadas. Con los orificios de los tubos externo e interno alineados, instale dos pernos de carruaje en los orificios alineados e instale las tuercas ciegas en la parte roscada de los pernos de carruaje (Figura ➌).

a. Nota: es imprescindible que ambos pernos de carruaje se instalen a través de los orificios de los tubos interno y externo.

4. Con el tornillo y la tuerca de regulación, gire la tuerca cilíndrica hasta llegar a la parte superior de la rosca del tornillo de regulación. Coloque el tornillo de regulación en la parte superior del poste de menor diámetro. El lado ahusado de la tuerca encajará en el poste de menor diámetro, y el reborde de la tuerca quedará apoyado sobre la parte superior del poste (Figura ➍).

a. Nota: Si el montaje se instaló a demasiada altura, esto podría impedir la instalación del tornillo y la tuerca de regulación. En este caso, vuelva al paso 3 y reajuste el montaje.

5. Coloque la otra placa sobre el tornillo de regulación, con la cara plana de la placa hacia arriba, y utilice una llave inglesa para completar el ajuste fino (Figura ➎).

Nota:

• Para obtener el mejor soporte posible bajo estructuras de madera, coloque el tubo de mayor diámetro y la placa contra el soporte de madera (Figura ➏)

• Asegúrese de que el poste esté centrado bajo la viga y que esté verticalmente a plomo (recto).

• Asegure las placas con los clavos, tornillos o pernos correspondientes.

• Para corregir pisos hundidos, coloque una viga debajo de los tirantes y sosténgala en su lugar con dos soportes telescópicos. Ajuste los soportes de piso media vuelta cada semana durante varias semanas.

• Los soportes telescópicos deben utilizarse como apoyo adicional, no como medio principal de apoyo.

• Cuando se los utilice en una aplicación de elevación, debe consultarse a un ingeniero calificado para determinar la carga permitida segura.

➎

➍

➋

➌

➊

PLACA

TuERCA CILíNDRICA

TORNILLO DE REGuLACIóN

POSTE DE DIáMETRO PEquEñO

TuERCAS y PERNOS DE CARRuAJE

POSTE DE DIáMETRO

GRANDE

PLACA

FlOOr JaCKiNstruCCiONes para la iNstalaCióN de sOpOrtes de pisO

➎ ➏



1. Placez le côté plat d’une des plaques sur le sol. Placez le fût du diamètre le plus élevé sur la plaque avec les trous orientés vers le haut (Figure ➊). Inversez pour les applications plus courtes. Pour les étais de 30 à 38 cm (12 à 15 po) passez les étapes 2 et 3.

2. Insérez le fût du diamètre le plus faible dans le fût du diamètre le plus élevé. Le trou d’extrémité du tube du diamètre le plus faible doit être inséré dans le tube de diamètre extérieur (Figure ➋).

a. Remarque : pour les plus petites hauteurs, les trous du tube du diamètre le plus élevé seront en bas (près de la base).

3. Soulevez le fût du diamètre le plus faible pour obtenir la hauteur la plus grande pouvant être obtenue pour les conditions données. Alignez les trous des tubes extérieur et intérieur. Insérez deux boulons de carrosserie dans l’alignement des trous et placez les écrous borgnes sur la portion filetée des boulons (Figure ➌).

a. Remarque : il est impératif d’insérer les deux boulons de carrosserie dans les trous des tubes intérieur et extérieur.

4. À l’aide de la vis et de l’écrou de réglage, faites tourner l’écrou rond vers le haut du filetage de la vis de réglage. Placez la vis de réglage en haut du fût du diamètre le plus petit. La partie conique de l’écrou s’insère dans le fût du diamètre le plus petit, l’épaulement de l’écrou reposant sur le haut du fût (Figure ➍).

a. Remarque : une installation trop élevée de l’ensemble peut empêcher l’installation de la vis et de l’écrou de réglage. Dans ce cas, revenez à l’étape 3 et réajustez l’ensemble.

5. Placez l’autre plaque au-dessus de la vis de réglage, le côté plat de la plaque vers le haut, et utilisez une clé à molette pour affiner le réglage (Figure ➎).

Remarque :

• Pour un meilleur soutien sous les structures en bois, placez le tube du plus grand diamètre et la plaque contre le support en bois (Figure ➏)

• Veillez à ce que le fût soit centré sous la poutre et vertical (droit)

• Sécurisez les plaques de manière appropriée avec des clous, des vis ou des chevilles.

• Pour corriger des planchers affaissés, placez une poutre sous les solives et maintenez l’ensemble en place avec deux étais télescopiques. Ajustez les étais d’un demi-tour chaque semaine pendant plusieurs semaines.

• Les étais télescopiques ne doivent servir que pour un soutien supplémentaire, en aucun cas pour le soutien principal.

• Pour une utilisation dans une application de soulèvement, consultez un ingénieur qualifié pour déterminer la charge maximale autorisée.

➎

➍

➋

➌

➊

PLAquE

éCROu ROND

ViS de RéGLAGE

FûT Du DIAMèTRE

FAIBLE

éCROuS ET BOuLONS DE

CARROSSERIE

FûT Du DIAMèTRE

éLeVé

PLAquE ➎ ➏

FlOOr JaCKiNstruCtiONs d’iNstallatiON de l’étai

➎ ➏



use a 4" x 4"

wood post and cut

to desired length.

use for:• Construction projects

• Repairs or installations

• Renovations

• Sagging floors

• Crawl spaces

The Shore Jack™ offers a convenient and durable way to make structural repairs and functions as temporary support for various construction and remodeling projects.

• Transforms a nominal 4 x 4 lumber into a versatile adjustable post

• Recommended as a temporary or non-primary support.

• Load capacity dependent on a 4 x 4 used up to 24,700 lbs.

• Consult with your wood supplier for allowable load

• 4" height adjustment creates and adjustable post

tempOrarYshOre JaCKtemporary shoring support

TEMpOrarY sHOrInG JackMOdEL# adjuStMEnt RanGE uPC

S301944PC 4" 8904750013018

Fits a 4"x 4" timber post (3.75"x 3.75" ID), height fully retracted: 14 5/16", 4" screw adjustment fully extended equals overall height at 18 5/16"



State-of-the-art multi-purpose jacks:• Perfect for stabilizing RV and other trailers

when parked• Easy to store, easy to install, easy to adjust

from 12" to 16"

mObile hOme JaCKsmobile home and rv stabilization.

MOBIlE HOME Jacks11 Ga. adjuStMEnt

RanGE uPC aLLOWaBLE LOad WEIGht unIt

CuBE

J Mobile 1' - 1' 4" / 12"-16" 7-16733-90001-1 24,700 9 lbs. 0.5

Available in both Standard Series and H Plates



Icc-Esr-1767complies with

IBc and IrcBuilding codes

• Adjustable Mono Posts can be installed in fifteen minutes by a single worker

• Set MONO-POST perpendicular between footer and beam with adjustment screw on footer; adjust screw until post is firmly in position

• Additional adjustments may be made during construction to maintain level floor

• Tamper proof adjustment... poured concrete floor locks mono-post adjustment permanently when correctly installed

• 11 gauge MONO-POSTS available in 3", 3 ½", 4" OD, and 3 ½" OD Schedule 40

• Corrosion resistant powder coating that exceeds ASTM-B117-85

• Lengths available in 3" increments up to 12 feet

• Fully assembled, self-contained, no loose parts

• Refer to current ICC-ES report for load values

mONO pOstsultimate strength, ultimate efficiency for permanent neW home construction and remodeling support.

STANDArD END PlATEuSED WITH WOOD BEAMS 4¼" x 7½" x .120" thick

"H" PlATEuSED WITH STEEL BEAMS 4¼" x 7¼" x .120" thick

SWIvEl END PlATE4" x 6" x .120" thick

SCrEW: 1¼" O.D., 7 Pitch "V" thread with 4" adjustment

NuT: 3" O.D. tapped for 1¼" 7 pitch thread



• Minimum yield strength of 42,000 psi. complies with ASTM A500. • Meets all FHA/HUd requirements. • Finished with corrosion resistant coating that exceeds

ASTM-B117-85. One year limited warranty.



STANDArD END PlATE: 4¼" x 7½" x .120" "H" PlATE: 4¼" x 7¼" x .120" SWIvEl END PlATE: 4" x 6" x .120"(Please specify either Standard or H Series Plate when ordering)

mONO pOsts3" o.d., 11 gauge steel tubing

MOdEL# adjuStMEnt RanGE

uPC StandaRd

SERIES

aLLOWaBLEStREnGth LOad

LBS. (aSd)*

dESIGnStREnGth LOad

LBS. (LRFd)*

WEIGht unIt

unItCuBE

200 6' - 6' 4" 72" - 76" 7-16733-31200-5 13,500 20,300 28 lbs. 1.37201 6' 3" - 6' 7" 75" - 79" 7-16733-31201-2 13,300 19,900 29 lbs. 1.42202 6' 6" - 6' 10" 78" - 82" 7-16733-31202-9 13,000 19,500 30 lbs. 1.48203 6' 9" - 7' 1" 81" - 85" 7-16733-31203-6 12,700 19,100 31 lbs. 1.53204 7' - 7' 4" 84" - 88" 7-16733-31204-3 12,400 18,600 32 lbs. 1.57205 7' 3" - 7' 7" 87" - 91" 7-16733-31205-0 12,100 18,200 33 lbs. 1.64206 7' 6" - 7' 10" 90" - 94" 7-16733-31206-7 11,800 17,700 34 lbs. 1.70207 7' 9" - 8' 1" 93" - 97" 7-16733-31207-4 11,500 17,300 35 lbs. 1.75208 8' - 8' 4" 96" - 100" 7-16733-31208-1 11,200 16,800 35 lbs. 1.81209 8' 3" - 8' 7" 99" - 103" 7-16733-31209-8 10,900 16,300 36 lbs. 1.86210 8' 6" - 8' 10" 102" - 106" 7-16733-31210-4 10,600 15,900 37 lbs. 1.92211 8' 9" - 9' 1" 105" - 109" 7-16733-31211-1 10,200 15,400 38 lbs. 1.97212 9' - 9' 4" 108" - 112" 7-16733-31212-8 9,900 14,900 39 lbs. 2.03213 9' 3" - 9' 7" 111" - 115" 7-16733-31213-5 9,600 14,400 40 lbs. 2.08214 9' 6" - 9' 10" 114" - 118" 7-16733-31214-2 9,300 14,000 41 lbs. 2.14215 9' 9" - 10' 1" 117" - 121" 7-16733-31215-9 9,000 13,500 42 lbs. 2.20216 10' - 10' 4" 120" - 124" 7-16733-31216-6 8,700 13,000 43 lbs. 2.25217 10' 3" - 10' 7" 123" - 127" 7-16733-31217-3 8,300 12,500 47 lbs. 2.31218 10' 6" - 10' 10" 126" - 130" 7-16733-31218-0 8,000 12,100 49 lbs. 2.36219 10' 9" - 11' 1" 129" - 133" 7-16733-31219-7 7,700 11,600 50 lbs. 2.42220 11' - 11' 4" 132" - 136" 7-16733-31220-3 7,400 11,100 51 lbs. 2.47221 11' 3" - 11' 7" 135" - 139" 7-16733-31221-0 7,100 10,700 52 lbs. 2.53222 11' 6" - 11' 10" 138" - 142" 7-16733-31222-7 6,800 10,200 53 lbs. 2.58223 11' 9" - 12' 1" 141" - 145" 7-16733-31223-4 6,600 10,000 54 lbs. 2.64

3½" o.d., 11 gauge steel tubing


uPC StandaRd

SERIES


LBS. (aSd)*

dESIGnStREnGth LOad

LBS. (LRFd)*

WEIGht unIt

unItCuBE

300 6' - 6' 4" 72" - 76" 7-16733-71200-3 17,000 25,600 33 lbs. 1.37301 6' 3" - 6' 7" 75" - 79" 7-16733-71201-0 16,800 25,200 34 lbs. 1.42302 6' 6" - 6' 10" 78" - 82" 7-16733-71202-7 16,500 24,800 35 lbs. 1.48303 6' 9" - 7' 1" 81" - 85" 7-16733-71203-4 16,300 24,500 36 lbs. 1.53304 7' - 7' 4" 84" - 88" 7-16733-71204-1 16,000 24,100 37 lbs. 1.59305 7' 3" - 7' 7" 87" - 91" 7-16733-71205-8 15,700 23,600 38 lbs. 1.64306 7' 6" - 7' 10" 90" - 94" 7-16733-71206-5 15,500 23,200 39 lbs. 1.70307 7' 9" - 8' 1" 93" - 97" 7-16733-71207-2 15,200 22,800 40 lbs. 1.75308 8' - 8' 4" 96" - 100" 7-16733-71208-9 14,900 22,400 41 lbs. 1.81309 8' 3" - 8' 7" 99" - 103" 7-16733-71209-6 14,600 21,900 42 lbs. 1.86310 8' 6" - 8' 10" 102" - 106" 7-16733-71210-2 14,300 21,500 44 lbs. 1.92311 8' 9" - 9' 1" 105" - 109" 7-16733-71211-9 14,000 21,000 45 lbs. 1.97312 9' - 9' 4" 108" - 112" 7-16733-71212-6 13,700 20,600 46 lbs. 2.03313 9' 3" - 9' 7" 111" - 115" 7-16733-71213-3 13,400 20,100 47 lbs. 2.08314 9' 6" - 9' 10" 114" - 118" 7-16733-71214-0 13,100 19,600 48 lbs. 2.14315 9' 9" - 10' 1" 117" - 121" 7-16733-71215-7 12,800 19,200 49 lbs. 2.20316 10' - 10' 4" 120" - 124" 7-16733-71216-4 12,400 18,700 50 lbs. 2.25317 10' 3" - 10' 7" 123" - 127" 7-16733-71217-1 12,100 18,200 52 lbs. 2.31318 10' 6" - 10' 10" 126" - 130" 7-16733-71218-8 11,800 17,700 52 lbs. 2.36319 10' 9" - 11' 1" 129" - 133" 7-16733-71219-5 11,500 17,300 52 lbs. 2.42320 11' - 11' 4" 132" - 136" 7-16733-71220-1 11,200 16,800 53 lbs. 2.47321 11' 3" - 11' 7" 135" - 139" 7-16733-71221-8 10,800 16,300 54 lbs. 2.53322 11' 6" - 11' 10" 138" - 142" 7-16733-71222-5 10,500 15,800 55 lbs. 2.58323 11' 9" - 12' 1" 141" - 145" 7-16733-71223-2 10,200 15,400 56 lbs. 2.64

*Consult a registered professional engineer for column selection based on ASD or LRFD methodologies.







STANDArD END PlATE: 4¼" x 7½" x .120" "H" PlATE: 4¼" x 7¼" x .120" SWIvEl END PlATE: 4" x 6" x .120"(Please specify either Standard or H Series Plate when ordering)

mONO pOsts4" o.d., 11 gauge steel tubing


uPC StandaRd

SERIES


LBS. (aSd)*

dESIGnStREnGth LOad

LBS. (LRFd)*

WEIGht unIt

unItCuBE

400 6'- 6' 4" 72" - 76" 7-16733-41400-6 20,400 30,700 37 lbs. 1.37401 6' 3" - 6' 7" 75" - 79" 7-16733-41401-3 20,200 30,400 38 lbs. 1.42402 6' 6" - 6' 10" 78" - 82" 7-16733-41402-0 20,000 30,000 40 lbs. 1.48403 6' 9" - 7' 1" 81" - 85" 7-16733-41403-7 19,700 29,700 41 lbs. 1.53404 7' - 7' 4" 84" - 88" 7-16733-41404-4 19,500 29,300 42 lbs. 1.59405 7' 3" - 7' 7" 87" - 91" 7-16733-41405-1 19,300 28,900 43 lbs. 1.64406 7' 6" - 7' 10" 90" - 94" 7-16733-41406-8 19,000 28,600 45 lbs. 1.70407 7' 9" - 8' 1" 93" - 97" 7-16733-41407-5 18,700 28,200 46 lbs. 1.75408 8' - 8' 4" 96" - 100" 7-16733-41408-2 18,500 27,800 47 lbs. 1.81409 8' 3" - 8' 7" 99" - 103" 7-16733-41409-9 18,200 27,400 48 lbs. 1.86410 8' 6" - 8' 10" 102" - 106" 7-16733-41410-5 17,900 26,900 50 lbs. 1.92411 8' 9" - 9' 1" 105" - 109" 7-16733-41411-2 17,600 26,500 51 lbs. 1.97412 9' - 9' 4" 108" - 112" 7-16733-41412-9 17,400 26,100 52 lbs. 2.03413 9' 3" - 9' 7" 111" - 115" 7-16733-41413-6 17,100 25,700 53 lbs. 2.08414 9' 6" - 9' 10" 114" - 118" 7-16733-41414-3 16,800 25,200 55 lbs. 2.14415 9' 9" - 10' 1" 117" - 121" 7-16733-41415-0 16,500 24,800 56 lbs. 2.20416 10' - 10' 4" 120" - 124" 7-16733-41416-7 16,200 24,300 57 lbs. 2.25417 10' 3" - 10' 7" 123" - 127" 7-16733-41417-4 15,900 23,900 58 lbs. 2.31418 10' 6" - 10' 10" 126" - 130" 7-16733-41418-1 15,600 23,400 60 lbs. 2.36419 10' 9" - 11' 1" 129" - 133" 7-16733-41419-8 15,300 22,900 61 lbs. 2.42420 11' - 11' 4" 132" - 136" 7-16733-41420-4 14,900 22,500 62 lbs. 2.47421 11' 3" - 11' 7" 135" - 139" 7-16733-41421-1 14,600 22,000 63 lbs. 2.53422 11' 6" - 11' 10" 138" - 142" 7-16733-41422-8 14,300 21,500 64 lbs. 2.58423 11' 9" - 12' 1" 141" - 145" 7-16733-41423-5 14,000 21,000 66 lbs. 2.64

3½" o.d., schedule 40 series


uPC StandaRd

SERIES


LBS. (aSd)*

dESIGnStREnGth LOad

LBS. (LRFd)*

WEIGht unIt

unItCuBE

300-40 6' - 6' 4" 72" - 76" 7-16733-61200-6 29,300 44,000 52 lbs. 1.37301-40 6' 3" - 6' 7" 75" - 79" 7-16733-61201-3 28,800 43,300 54 lbs. 1.42302-40 6' 6" - 6' 10" 78" - 82" 7-16733-61202-0 28,400 42,600 56 lbs. 1.48303-40 6' 9" - 7' 1" 81" - 85" 7-16733-61203-7 27,900 41,900 58 lbs. 1.53304-40 7' - 7' 4" 84" - 88" 7-16733-61204-4 27,400 41,200 60 lbs. 1.59305-40 7' 3" - 7' 7" 87" - 91" 7-16733-61205-1 26,900 40,500 62 lbs. 1.64306-40 7' 6" - 7' 10" 90" - 94" 7-16733-61206-8 26,400 39,700 64 lbs. 1.70307-40 7' 9" - 8' 1" 93" - 97" 7-16733-61207-5 25,900 39,000 65 lbs. 1.75308-40 8' - 8' 4" 96" - 100" 7-16733-61208-2 25,400 38,200 67 lbs. 1.81309-40 8' 3" - 8' 7" 99" - 103" 7-16733-61209-9 24,900 37,400 69 lbs. 1.86310-40 8' 6" - 8' 10" 102" - 106" 7-16733-61210-5 24,400 36,600 71 lbs. 1.92311-40 8' 9" - 9' 1" 105" - 109" 7-16733-61211-2 23,800 35,800 73 lbs. 1.97312-40 9' - 9' 4" 108" - 112" 7-16733-61212-9 23,300 35,000 75 lbs. 2.03313-40 9' 3" - 9' 7" 111" - 115" 7-16733-61213-6 22,700 34,100 77 lbs. 2.08314-40 9' 6" - 9' 10" 114" - 118" 7-16733-61214-3 22,200 33,300 79 lbs. 2.14315-40 9' 9" - 10' 1" 117" - 121" 7-16733-61215-0 21,600 32,500 81 lbs. 2.20316-40 10' - 10' 4" 120" - 124" 7-16733-61216-7 21,000 31,600 83 lbs. 2.25317-40 10' 3" - 10' 7" 123" - 127" 7-16733-61217-4 20,500 30,800 85 lbs. 2.31318-40 10' 6" - 10' 10" 126" - 130" 7-16733-61218-1 19,900 29,900 87 lbs. 2.36319-40 10' 9" - 11' 1" 129" - 133" 7-16733-61219-8 19,300 29,100 89 lbs. 2.42320-40 11' - 11' 4" 132" - 136" 7-16733-61220-4 18,800 28,200 90 lbs. 2.47321-40 11' 3" - 11' 7" 135" - 139" 7-16733-61221-1 18,200 27,400 92 lbs. 2.53322-40 11' 6" - 11' 10" 138" - 142" 7-16733-61222-8 17,600 26,500 94 lbs. 2.58323-40 11' 9" - 12' 1" 141" - 145" 7-16733-61223-5 17,100 25,700 96 lbs. 2.64



Installation Time: Approximately 15 MinutesTools Required: None

1. Choose the correct size and strength Mono-Post for the project based on construction document.

2. Adjust screw to slightly short of the length needed between footer and load carrying beam at installation location (Figure ➊).

3. Place Mono-Post vertically between footer and beam with the adjustment nut and screw on the footer (adjustable end down) (Figure ➋).

4. Adjust screw to wedge the Mono-Post between footer and beam, tighten until Mono-Post is firmly centered directly under the load carrying beam and the footer below (Figure ➌).

5. Additional screw adjustments may be made during construction to keep floor level

6. Poured concrete basement floor permanently locks Mono-Post adjustment (Figure ➍).

TAMPER PROOF ADJuSTMENT: MONO-POST SHOuLD BE POSITIONED WITH ADJuSTMENT NuT AND SCREW AT THE FOOTER.

LOAD CARRyING

BEAM

FOOTERNote: Always consult Local Building Codes for specific installation requirements in your area.

➋

ADJuSTMENT NuT AND SCREW

➊ ➍

➌

mONO pOstsiNstallatiON iNstruCtiONs




Tiempo de instalación: aproximadamente 15 minutos.

Herramientas necesarias: ninguna

1. Escoja el monoposte del tamaño y la resistencia adecuados para el proyecto

en función de los documentos de construcción

2. Ajuste el tornillo a un largo ligeramente inferior a la longitud necesaria

entre la base y la viga que soporta peso en el lugar de instalación (Figure

➊).

3. Coloque el monoposte en forma vertical entre la base y la viga, con la

tuerca y el tornillo de regulación sobre la base (con el extremo regulable

hacia abajo) (Figure ➋).

4. Ajuste el tornillo para encajar el monoposte entre la base y la viga, ajuste

hasta que el monoposte quede firmemente centrado directamente debajo

de la viga que soporta peso, con la base debajo (Figure ➌).

5. Pueden realizarse ajustes adicionales del tornillo durante la construcción

para mantener el piso nivelado.

6. El piso de cemento vertido del sótano bloquea el ajuste del monoposte

(Figure ➍).

AJUSTe iNViOLABLe: eL MONOPOSTe deBe COLOCARSe CON LA TUeRCA Y eL

TORNILLO DE REGuLACIóN EN LA BASE.

DE TRANSPORTE

DE CARGA DEL HAz

LA BASENota: siempre deben consultarse los códigos de construcción locales para determinar los requisitos de instalación específicos de su área.

➋

TuERCA y EL TORNILLO DE AJuSTE

➊ ➍

➌


mONO pOstsiNstruCCiONes de iNstalaCióN

Temps d’installation : environ 15 minutes

Outils requis : aucun

1. Choisissez le poteau simple de la longueur et de la force adaptées au

projet en fonction des documents de construction

2. Sur le site de l’installation, ajustez la vis pour obtenir une longueur

légèrement inférieure à la longueur requise entre la base et la poutre

porteuse (Figure ➊).

.3. Placez le poteau simple verticalement entre la base et la poutre, l’écrou et

la vis de réglage sur la base (extrémité réglable vers le bas) (Figure ➋).

4. Réglez la vis pour caler le poteau simple entre la base et la poutre,

et resserrez jusqu’à ce que le poteau simple soit fermement centré

directement sous la poutre porteuse et avec la base (Figure ➌).

5. Il est possible d’effectuer des réglages supplémentaires de la vis pendant la

construction afin de maintenir le niveau du plancher

6. Le cimentage du sol fixe de manière permanente le réglage du poteau

simple (Figure ➍).

POuR uN RéGLAGE PROTéGé CONTRE LES MANIPuLATIONS : LE POTEAu

SiMPLe dOiT ÊTRe POSiTiONNé AVeC L’éCROU eT LA ViS de RéGLAGe SUR

LA BASE.

DE CHARGE FAISCEAu

FOOTER Remarque : consultez toujours le code du bâtiment local pour connaître les exigences d’installation spécifiques dans votre région.

➋

éCROu DE RéGLAGE eT LA ViS

➊ ➍

➌

mONO pOstsiNstruCtiONs d’iNstallatiON




State-of-the-art multi-purpose jacks:• Ideal permanent support for crawl

spaces, under windows and tight confines

• Easy to store, easy to install, easy to adjust

miNi COlumNscompact permanent support for renovations and construction projects.

MInI ColuMnSnO. uPC nO. uPC dESCRIPtIOn aLLOWaBLE

LOadP M110 716733990012 P H110 716733990166 1'0" - 1'4" 3" 24,700 P M114 716733990029 P H114 716733990173 1'4" - 1'8" 3" 24,700 P M118 716733990036 P H118 716733990180 1'8" - 2'0" 3" 24,700 P M120 716733990043 P H120 716733990197 2'0" - 2'4" 3" 23,700 P M124 716733990050 P H124 716733990203 2'4" - 2'8" 3" 23,700 P M128 716733990067 P H128 716733990210 2'8" - 3'0" 3" 23,700 P M130 716733990074 P H130 716733990227 3'0" - 3'4" 3" 22,300 P M134 716733990081 P H134 716733990234 3'4" - 3'8" 3" 22,300 P M138 716733990098 P H138 716733990241 3'8" - 4'0" 3" 22,300 P M140 716733990104 P H140 716733990258 4'0" - 4'4" 3" 20,700 P M144 716733990111 P H144 716733990265 4'4" - 4'8" 3" 20,700 P M148 716733990128 P H148 716733990272 4'8" - 5'0" 3" 20,700 P M150 716733990135 P H150 716733990272 5'0" - 5'4" 3" 18,800 P M154 716733990142 P H154 716733990289 5'4" - 5'8" 3" 18,800 P M158 716733990159 P H158 716733990296 5'8" - 6'0" 3" 18,800

Available in both Standard Series and H Plates





FiXed leNGth COlumNspermanent support for neW home construction.

Designed for permanent building support applications, available in any length up to 12', AKRON fixed length columns arrive fully assembled to your specifications and fully code compliant.

• 11 gauge COLUMNS available in 3", 3½", 4" OD and 3½" OD Schedule 40

• Corrosion-resistant powder coating exceeds ASTM-B117-85

• Choose one plate welded + one plate loose, both plates welded or both plates loose

• ID labels clearly show size

• Any length - fixed length columns are available in custom lengths up to 12 feet to fit any need

• Order column length to fit. (See product list for most popular sizes).

STANDArD END PlATEuSED WITH WOOD BEAMS 4¼" x 7½" x .120" thick

"H" PlATEuSED WITH STEEL BEAMS 4¼" x 7¼" x .120" thick



3" o.d., 11 gauge steel tubing


uPC StandaRd

SERIES


LBS. (aSd)*

dESIGnStREnGth LOad

LBS. (LRFd)*

WEIGht unIt

unItCuBE

311060 6' (72") 7-16733-30600-4 18,800 28,300 26 lbs 1.33311070 7' (84") 7-16733-30700-1 16,900 25,400 36 lbs 1.55311080 8' (96") 7-16733-30800-8 14,900 22,300 40 lbs. 1.77311090 9' (108") 7-16733-30900-5 12,900 19,300 43 lbs. 1.99311100 10' (120") 7-16733-31000-1 11,000 16,500 47 lbs. 2.21311120 12' (144") 7-16733-30120-7 7,700 11,600 54 lbs. 2.66

3½" o.d., 11 gauge steel tubing3511060 6' (72") 7-16733-50600-8 24,000 36,100 31 lbs. 1.333511070 7' (84") 7-16733-50700-6 22,200 33,300 35 lbs. 1.553511080 8' (96") 7-16733-50800-2 20,200 30,400 39 lbs. 1.773511090 9' (108") 7-16733-50900-9 18,200 27,400 44 lbs. 1.993511100 10' (120") 7-16733-50100-3 16,200 24,300 48 lbs. 2.213511120 12' (144") 7-16733-50120-1 12,400 18,600 58 lbs. 2.66

4" o.d., 11 gauge steel tubing411060 6' (72") 7-16733-40600-1 29,100 43,700 35 lbs 1.33411070 7' (84") 7-16733-40700-8 27,400 41,100 40 lbs. 1.55411080 8' (96") 7-16733-40800-5 25,500 38,300 47 lbs. 1.77411090 9' (108") 7-16733-40900-2 23,600 35,400 51 lbs. 1.99411100 10' (120") 7-16733-41000-8 21,600 32,400 57 lbs. 2.21411120 12' (144") 7-16733-41200-2 17,500 26,400 65 lbs. 2.66

3½" o.d., schedule 403540060 6' (72") 7-16733-50635-0 41,500 62,400 50 lbs 1.373540070 7' (84") 7-16733-50703-6 38,100 57,300 57 lbs. 1.593540080 8' (96") 7-16733-50803-3 34,600 52,000 65 lbs. 1.813540090 9' (108") 7-16733-50903-0 31,000 46,600 72 lbs. 2.033540100 10' (120") 7-16733-50100-3 27,400 41,200 80 lbs. 2.253540120 12' (144") 7-16733-50120-1 20,600 31,000 95 lbs. 2.70






FiXed leNGth COlumNs

STANDArD END PlATE: 4¼" x 7½" x .120" "H" PlATE: 4¼" x 7¼" x.120" (Please specify either Standard or H Series Plate when ordering)



the Grabber saddle platesaddle plate for laminated (lvl) or dimensional lumber beams.

• The Grabber Saddle Plate provides lateral support for dimensional lumber beams and prevents the beam from torquing

• Allows for the through connection of fasteners into the side of the wood beam

• Some municipalities have required the use of a saddle plate for dimensional lumber or LVL beams in conjunction with Adjustable Steel Columns

GraBBEr saddlE plaTEPaRt# dIMEnSIOnS uPC ShELF PaCk Wt.PC.

SP5716 5 3/8" W x 3 9/16" H x 8" L 8-90475-001716-0 12 3.7 lbs.SP3916 3 5/8" W x 3 9/16" H x 8" L 8-90475-001916-4 12 2.4 lbs.

if you are using a laminated (LVL) or dimensional lumber beam, you must use a saddle plate in conjunction with Adjustable Steel Columns per Wisconsin uDC (uniform Dwelling Code).

Com21.22(3)(d) Lateral restraint for all wood beams shall be provided at all columns using a saddle plate or other approved connection where the beam meets one of the following conditions: 1. The beam is not restrained at both ends. 2. The beam is more than 11¼ inches deep using actual measurement.


Standard heights for Both Round & Square (approx.):12", 15", 18", 24", 30", 36", 48". Standard package: 5 per bundle

• Area Walls provide more daylight and drainage for at-grade windows

• 22 gauge galvanized steel with deep corrugations for extra strength

• Fully rolled top for rigidity and safety

• Wide, pre-punched flat mounting flanges

• Single-piece construction up to 48" height – no welds

area Wallsall-steel, single-piece construction for fast, easy installation.

roundMOdEL# hEIGht/StyLE uPC BundLE WEIGht unIt CuBEAWR12 12" Round 7-16733-90120-9 5 31 lbs. 4.63AWR15 15" Round 7-16733-90150-6 5 43 lbs. 5.78AWR18 18" Round 7-16733-90180-3 5 45 lbs. 6.94AWR24 24" Round 7-16733-90240-4 5 59 lbs. 9.25AWR30 30" Round 7-16733-90300-5 5 72 lbs. 11.56AWR36 36" Round 7-16733-90360-9 5 81 lbs. 13.88AWR48 48" Round 7-16733-90480-4 5 125 lbs. 18.50

12" Vent 12" Round 7-16733-91200-7 10 35 lbs. 2.24

SquareMOdEL# hEIGht/StyLE uPC BundLE WEIGht unIt CuBEAWS12 12" Square 7-16733-90012-7 5 33 lbs. 3.85AWS15 15" Square 7-16733-90015-8 5 38 lbs. 4.82AWS18 18" Square 7-16733-90018-9 5 41 lbs. 5.78AWS24 24" Square 7-16733-90024-0 5 63 lbs. 7.71AWS30 30" Square 7-16733-90030-1 5 74 lbs. 9.64AWS36 36" Square 7-16733-90036-3 5 95 lbs. 11.56AWS48 48" Square 7-16733-90048-6 5 125 lbs. 15.42

all sTEEl WIndOW WElls

square37" wide, 13" projection

round37" wide 16" projection accommodates 35" to 40" width













Documents

We support What america builds. - Floor Jacks, Window ... Products Catalog_2014.pdf · We support What america builds. ... and support. Our vertically ... temporary support under