Primal Strength Curved Treadmill

User Manual

This equipment meets the GB17498.1/GB17498.6 Class S Standard (S=studio)

Company Address: Primal Strength, Unit 1&2, Viewfield Park, Viewfield Road, Coatbridge, ML5 5QS

Company Name: Primal Strength Limited

Tel: 0800 689 4021

1 / 15

Contents

Catalogue............................. 2

Important Safety Instructions..................... 3

Product Description......................... 5

Installation Instructions.........................6-8

Instructions For Use.........................9 - 1 0

Display Description ....... 11-12

Technical Data......................... 13

Equipment Movement and Adjustment................... 14

Routine Maintenance................... 15-16

Fault Diagnosis......................... 17-18

2 / 15

Important Safety InstructionsPrior to the implementation of any stretching or exercise program, you must consult a physician or a qualified health care practitioner. It is best to have a thorough understanding of the relevant information before deciding to implement any activities that may affect your health. Please read all instructions before using the product. These instructions can ensure user safety and protect products.

When using electrical equipment, you have to take basic precautions which include the following content.

WARNING

The product can be used only by the way specified in the User Manual and can be used only by the way and conditions specified in the manual. Any other use will be improper, may cause danger to the user and will void the warranty.

Do not use weights or accessories on this machine.

Do not put your hands near the moving parts.

Do not put your feet under the moving parts.

Do not let objects fall on or insert into the openings in the machine.

Wear suitable clothes and shoes when training; Do not wear clothes that hinder perspiration. Keep loose clothing or towels away from moving parts.

When the product is in use, any third parties nearby must maintain a safe distance.

Do not use equipment in the presence of children or pets.

Fitness center/gym staff should clearly clarify to the user the correct use of equipment to avoid improper use.

The product can only be used after fully installed.

Prior to use, the product should be checked. In the event of any unusual performance or perceived faults, contact the manufacturers immediately.

Install and operate the product on a hard-floor, rubber surface. A recommended 2m x 1m safety area should be reserved to the rear of the treadmill.

Do not expose the product to the direct sunlight.

3 / 15

Do not use the product outdoors, expose to the outside atmosphere and do not spray to the product with chemicals.

Do not place the product in a humid environment, such as a swimming pool or near a sauna room.

All the components (such as power cables and switches) must be kept away from liquids, in case of electric shock.

Products should be kept and used in good operating condition. If you find wear and tear has affected the product, please consult LAND technical support services.

Follow maintenance instructions given in this User Manual.

The installation, maintenance and adjustment of equipment shall be carried out by the professional or designated personnel of Primal Strength Limited.

The electrical equipment shall conform to the standards or laws of the country where the equipment is used.

Do not put anything on the rack or display.

Primal Strength will not be held responsible for the loss caused by the following reasons: maintenance without authorization, improper use, accident, negligence, improper assembly or installation, any modifications or adjustments without the written authorization of Primal Strength Limited and users do not comply with the user manual when using, running and maintaining the product as detailed herein.

Product Description

Display (A): Displays ongoing exercise.

Running Belt (B): Rubber Surface, which can ease the impact on the joints.

Lateral Handle (C): When standing/running on treadmill, you can hold this to maintain balance or support yourself as necessary.

Central Handle (D): When standing/running on treadmill, you can hold this to maintain balance or support yourself as necessary.

Side upper boards (E): Should the user wish to step off the treadmill, they can put their feet on the boards adjacent to the running belt as needed.

Braking (F): The user can adjust the brake level from zero braking to the maximum. 4 / 15

Installation Instructions

A、 Remove side boards (01) and side shells(02) into position (as per Picture 1)

B、 First fix the left pillar with Inner Hex Cylindrical Head Screws B1(M12*45), Washer B2(Φ12), Inner Hex Cylindrical Head screws B3(M10*12), Washer B4(Φ10),then connect data wire a of left pillar to the data wire b of main frame (Picture 2)

5 / 15

C、 First fix the right pillar with Inner Hex Cylindrical Head Screws B1(M12*45), Washer B2(Φ12), Inner Hex Cylindrical Head screws B3(M10*12), Washer B4(Φ10), then connect the Wire C bypass wire disc (03) to Reluctance shaft d (Picture2, Picture 3)

D、 Fix the central armrest with Inner Hex Pyramid Locking Screw B5 (M8*20) (Picture 4)

E、 Fix the side armrest with Inner Hex Flat Head Screw B6(M10*20), Washer B7(Φ10) (Picture 5)

F、 Fix the Display with Inner Hex Flat Head Screw B8(M10*20) and butterfly spring B9 (Φ10), then connect Data Wire plug e to f (Picture 6)

G、 Re-install Side upper boards (01)and Side shells (02) (Picture 1)

The above instructions similarly apply for Primal Strength Curved Treadmill.

6 / 15

7 / 15

Instructions for use

Hold the side handles then step on the running belt facing forward from the rear side, as shown. Place feet on both sides of the upper boards.

Adjust the brake whilst stationary.

Stand on the running belt and then begin to walk/run.

At the beginning of the exercise, hold the handle for added safety. Once you feel familiar and comfortable to do so, release your hands from the handle ensuring you maintain balance and correct running/walking posture.

Hint: begin by walking at a brisk speed, then increase speed gradually while maintaining stability and security.

With a curved treadmill, the more you move toward the central handle (front), the quicker the treadmill will allow you to accelerate, likewise the further back you tend to run, the more you will decelerate.

In the event of a loss of balance or when finishing your period of exercise, grasp both side handles and put your feet on the side upper boards for safety.

When exercising, please adjust the braking level gradually.

The running belt is not driven by a motor and can run freely. When stepping on or off the belt, you should hold the side handles for safety.

WARNINGBraking is used to reduce the running speed, but cannot completely stop the belt; even at the maximum braking level, the belt can still turn.

8 / 15

For different exercises and braking strengths, the combined uses of the side and central handles can provide a variety of exercise methods.

Brisk walking Fast running

Propel Side shuffle step

WARNING

Users must keep concentration at all times to avoid losing balance.

Two users should never use the same treadmill at the same time.

9 / 15

Primal Strength Curved Treadmill is designed and produced only for simulation walking and running, Any other purpose will be regarded as improper and may cause danger.

Do not touch the running belt when rotating/in use.

Be careful to avoid loose shoelaces and other clothing details entering the crevices of the equipment, as it may cause tangling and subsequently present a tripping hazard.

Display description

1. Key function

Select&Confirm/Erase

(MODE/RESET)

1. Used for switching Windows between TIME, DISTANCE, CALORIES, PULSE

2. This function allows you to input/select specific settings for proposed exercise period.

3. Constant Press for 2 seconds to reset the settings to default level.

Settings

(SET)

1. Press once to change by one unit, constant press will quickly increase units.

2. This sets the (TIME), (DISTANCE), (CALORIES), (PULSE) numerical values.

Recovery

(Heart Rate)

This is used to monitor and record an athlete's recovery of heart rate after finishing the exercise.

Note: While the heart rate’s digital display is running, you can continue to monitor heart rate even after exercise has stopped/resting on side boards.

2. Operating instructions

Turn On: After loading the battery, you will hear a beep lasting 2 seconds, which will be followed by the display screen illuminating.

10 / 15

Turn Off:

The machine will automatically enter into a sleep state after 4 minutes without any signal input/activity.

Note:

When the display is faint or begins to fade, this means the battery is low on charge and needs replaced. If there is no input signal, please check whether the wire is connected or not.

Technical data

Model No. Primal Strength Curved Treadmill

(LCD Configuration)

Primal Strength Curved Treadmill

(Digital Configuration)Power Supply(Optional Adapter) - 100-240V 50/60HzN.Weight 195KG 195KGMax User Weight 180KG 180KGNoise Degree Below 80dB (A) Below 80dB (A)Protection Level IP 20 IP 20Running Temperature From +5°C to +40°C From +5°C to +40°CElectrical insulation level II Level II LevelProduct Dimension（L*W*H） 1950*960*1600 1950*960*1600

Package Dimension（L*W*H） 2000*1100*900mm 2000*1100*900mm

Movement and adjustment of equipment

The equipment is equipped with two fixed front wheels. If you need to move the equipment, simply lift it slightly to sit on the wheels and you can easily move forward or backward etc as needed.

11 / 15

As the equipment is heavy, it is advisable for two or more people to move the treadmill safely and carefully together.

If the floor condition is poor, the front wheel cannot be used or will risk becoming damaged. In this instance, lifting and transporting equipment is advisable for moving the equipment.

Warning

You must be very careful when you move the equipment, otherwise it could damage the stability of the equipment.

Equipment should only be operated on a level, flat floor, on rubberized matting.

You have to adjust the equipment ensure a horizontal/level orientation, as shown:

A, unscrew the nut (B);

B, screwing or unscrewing the universal foundation (A) until the equipment is stable and firm.

C, after adjustment, tighten the nut (B).

12 / 15

Routine maintenanceIn order to ensure cleanliness and longevity of the equipment for the user, the equipment should always be kept clean and dust-free, complying with basic hygienic standards, especially used in the gyms or by many people.

To clean the display, please refer to following steps:

- Start the brake, as far as possible to slow down the rotational speed of belt;

- Clean the panel with a damp cloth.

Clean the equipment once a week.

- Start the brake, as far as possible to slow down the rotation of running belt;

- Clean the outside of equipment with a wet sponge

- After removing the equipment, clean the floor with a vacuum cleaner

- Do not use chemicals or solvents.

Warning

Be careful not to wipe the pattern and instructions on the label too aggressively as this can causes damage.

In order to ensure the equipment can be used safely, it should be inspected every two weeks for product damage or wear.

All operations of cleaning and maintenance should be carried out under fully static conditions of running belt.

Periodic maintenance, adjustment or lubrication of the product should be carried out by Primal Strength Technical Support Services. We recommend an annual service.

13 / 15

Inspecting of the following should occur every two weeks:

- Whether the components and surfaces of the running belt are worn;

- Whether the braking system works or not;

- Whether the plastic protector is intact.

Fault diagnosisThe following table illustrates the possible failures in the use of equipment. If the remedies provided cannot solve the problem, please contact the technical support service. Digital Screen only.

Fault Reason RemediesThe screen does not switch on.

Insufficient voltage Use other equipment to connect the power supply to test that voltage supply works

Power cord damage Contact LAND technical support services.

The power cord is not plugged in.

Check connection status.

There is a problem installing the wires

Check connection status.

The connector of the control panel suddenly disconnects.

Contact LAND technical support services.

Excessiveinternal noise

The equipment is not sitting perfectly flat on the floor

Check whether all the feet are stable on the floor and adjust accordingly.

Bearing damage Contact LAND technical support services.

The running belt deviates from the central position.

Contact LAND technical support services.

When exercising, the device displays incorrect or unreliable data

The equipment's display signal may be experiencing interference from other equipment (such as household appliances).

Move equipment to other places or move household appliances further away.

Incorrect heart rate reading

Other signal emitters appeared near the

Move the equipment to other places to avoid overlap with other signals

14 / 15

from a heart rate monitor/chest strap HR monitor

equipment. (between two devices)The minimum distance is 80 cm).

There is a strong interference source near the equipment

Find the source of interference (such as home appliances), and move away from interfering sources or moving equipment.

Heart rate monitor strap loosens.

Changing chest strap.

The HR strap does not contact the skin properly at the signal receiver.

Use water to wet the internal part of HR monitor to improve conductivity.

Receiver is broken Replace HR monitor.

15 / 15