€¦ · Web viewIn addition to the above provide products that are third party certified through SCS Indoor Advantage Gold. Provide Data for Credit IEQ 9 - Enhanced Acoustical Performance:

SECTION 08 14 00PLASTIC-LAMINATE-FACED WOOD DOORS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2013 - 2014 ARCAT, Inc. - All rights reserved

1 GENERAL

1.1 SECTION INCLUDES

1.1.1 Wood doors of the following types:1.1.1.1 Wood veneer faced doors. (Commercial Series) (Architectural Series)1.1.1.2 High pressure decorative laminate (HPDL) faced doors. (Architectural Series)1.1.1.3 Panel doors. (Smooth Hardboard Panel Doors) (Embossed 'Rustic' Hardboard

Panel Doors) (Medium Density Overlay Panel Doors)1.1.1.4 Molded panel doors. (Residential Molded Panel Series) (Commercial Molded

Series)1.1.1.5 Decorative panel doors. (Portrait Collection) (Masterpiece Series) (Applied

Decorative Door Molding)1.1.1.6 MDF solid panel doors. (MDF Doors)1.1.1.7 Light frames and louvers.1.1.1.8 Lead lined doors. (Lead Line Doors)1.1.1.9 Acoustical doors. (STC Doors)1.1.1.10 Mirrored doors. (Mirrored Doors)

1.2 RELATED SECTIONS

1.2.1 Section 06 10 00 - Rough Carpentry.

1.2.2 Section 06 20 00 - Finish Carpentry.

1.2.3 Section 08 11 00 - Metal Doors and Frames.

1.2.4 Section 08 71 53 - Security Door Hardware.

1.2.5 Section 08 83 13 - Mirrored Glass Glazing.

1.2.6 Section 09 90 00 - Painting and Coating.

1.2.7 Section 28 32 43 - Radiation Dosimeters.

1.3 REFERENCES

1.3.1 ASTM International (ASTM):1.3.1.1 ASTM D 1037 - Methods for Evaluating the Properties of Wood-Based Fiber and

Particle Board1.3.1.2 ASTM E 90 - Standard Test Method for Laboratory Measurement of Airborne

Sound Transmission Loss of Building Partitions and Elements.1.3.1.3 ASTM E 152 - Methods of Fire Tests of Door Assemblies.

1.3.2 American National Standards Institute (ANSI):1.3.2.1 ANSI A 208.1 - Standard for Particleboard.1.3.2.2 ANSI A 208.2 - Standard for Medium Density Fiberboard for Interior Use.

08 14 00-1

1.3.3 Window and Door Manufacturers Association (WDMA):1.3.3.1 WDMA I.S. 1A-13 - Industry Standard for Interior Architectural Wood Flush

Doors.1.3.3.2 WDMA I.S. 6A-13 - Industry Standard for Interior Architectural Stile and Rail

Doors.

1.3.4 Architectural Woodwork Standards (AWS):1.3.4.1 Architectural Woodwork Institute (AWI): Quality Standards Illustrated (QSI).1.3.4.2 Woodwork Institute (WI): Manual of Millwork (MM).

1.3.5 National Fire Protection Association (NFPA):1.3.5.1 NFPA 80 - Standard for Fire Doors and Other Opening Protectives.1.3.5.2 NFPA 252 - Standard Methods of Fire Tests of Door Assemblies.

1.3.6 Underwriters' Laboratories (UL):1.3.6.1 UL 10B - Fire Tests of Door Assemblies.1.3.6.2 UL 10C - Positive Pressure Fire Tests of Door Assemblies.1.3.6.3 UL 752 - Bullet-Resisting Equipment.

1.3.7 ITS (Warnock Hersey): Certification Listings for Fire Doors.

1.3.8 Forest Stewardship Council (FSC): Guidelines for environmentally certified wood doors.

1.3.9 US Green Building Council (USGBC): LEED - Leadership in Energy and Environmental Design rating system.

1.4 SUBMITTALS

1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.4.2 Product Data: Manufacturer's product construction data, hardware attachment performance data, specifications and installation instructions for each type of wood door, including details of core, raised panel (if applicable) and edge construction, trim for lite openings and similar components:1.4.2.1 Preparation instructions and recommendations.1.4.2.2 Storage and handling requirements and recommendations.1.4.2.3 Cleaning methods.

1.4.3 Product Certification: Provide documents showing compliance to the following WDMA door attributes, validating the specified WDMA Performance Duty Level:1.4.3.1 Adhesive Bonding Durability: WDMA TM-6.1.4.3.2 Cycle Slam: WDMA TM-7.1.4.3.3 Hinge Loading: WDMA TM-8.1.4.3.4 Screw Holding: WDMA TM-10.

1.4.3.4.1 Door Face.1.4.3.4.2 Vertical Door Edge.1.4.3.4.3 Horizontal Door Edge (applies when hardware is attached).

1.4.4 LEED Submittals: The following project data and calculation information shall be submitted to document prerequisite compliance.1.4.4.1 Product Data: for Credit MR-4. For products having recycled content, provide

documentation indicating percentage by weight of post-consumer and pre-consumer/post-industrial recycled content.

1.4.4.1.1 Provide statement indicating cost for each material having recycled content.

1.4.4.1.2 Provide third party certification for recycled content.1.4.4.2 Product Data for Credit MR 5: For products and materials that comply with

08 14 00-2

requirements for regional materials, documents indicating location of material manufacturer and point of extraction, harvest, or recovery for each raw material that contributes towards this credit. Include statement indicating distance to Project, cost for each regional material, and fraction by weight that is considered regional.

1.4.4.3 Certificates for Credit MR 6, LEED Core and Shell and Credit MR 7: Provide the project's total project cost (for application of 45 percent default factor) or total materials cost. Complete the rapidly renewable materials calculation template provided. Provide an optional narrative for any special circumstances. A Vendor is defined as the company that sells wood products to building project contractors or subcontractors. Each vendor invoice shall conform to the following requirements:

1.4.4.3.1 Each wood product shall be identified on a line-item basis;1.4.4.3.2 FSC products shall be identified as such on a line-item basis and shall be

identified as "FSC 100 percent," "FSC Mix Credit," or "FSC Mix [NN] percent";

1.4.4.3.3 The dollar value of each line item shall be shown;1.4.4.3.4 The vendor's chain-of-custody (COC) number shall be shown on any

invoice that includes FSC products.1.4.4.4 Product Data for Credit IEQ 4.4: For adhesives and composite wood products,

documentation indicating that product contains no added urea formaldehyde.1.4.4.5 LEED for Schools Laboratory Test Reports for Credit IEQ 4.4: For composite

wood products, documentation indicating that products comply with the testing and product requirements of the California Department of Health Services' "Standard Practice for the Testing of Volatile Organic Emissions from Various Sources Using Small-Scale Environmental Chambers." All composite wood and agrifiber products shall meet this requirement. In addition to the above provide products that are third party certified through SCS Indoor Advantage Gold.

1.4.4.6 Provide Data for Credit IEQ 9 - Enhanced Acoustical Performance: Building shell, classroom partitions and other core learning space partitions meet STC (Sound Transmission Class) requirements of ANSI S12.60-2002. Section 4.5.5 entry doors into classrooms and other core learning spaces.

1.4.5 Shop Drawings: Indicate location, size, and hand of each door; elevation of each kind of door; construction details and the following:1.4.5.1 Dimensions and locations of blocking.1.4.5.2 Dimensions and locations of mortises and holes for hardware.1.4.5.3 Dimensions and locations of cutouts.1.4.5.4 Undercuts.1.4.5.5 Requirements for veneer matching.1.4.5.6 Doors to be factory finished and finish requirements.1.4.5.7 Fire-protection ratings for fire-rated doors.

1.4.6 Verification Samples:1.4.6.1 Factory finishes applied to actual door face materials, approximately 8 by 10

inches (200 by 250 mm), for each material and finish.1.4.6.2 For each wood species and transparent finish, provide set of three samples

showing typical range of color and grain to be expected in finished work.1.4.6.3 Provide construction samples of doors, approximately 5 by 5 inches (125 by 125

mm), with door faces and vertical edges representing actual construction to be used.

1.4.6.3.1 Provide unfinished samples for each species of veneer and required if factory furnishing is not required, approximately 8 by 10 inches (200 by 250 mm).

1.4.6.4 Louver blade and frame sections, minimum 6 inches (150 mm) long, for each material and finish specified.

08 14 00-3

1.4.6.5 Frames for light openings, minimum 6 inches (150 mm) long, for each material, type, and finish required.

1.5 QUALITY ASSURANCE

1.5.1 Manufacturer's Qualifications: Company specializing in manufacturing products specified herein with a minimum of five years documented experience.1.5.1.1 A qualified manufacturer that is a member in good standing of the Window and

Door Manufacturers Association.1.5.1.2 A qualified manufacturer that is certified for chain of custody by an FSC-

accredited certification body.1.5.1.2.1 Doors requiring environmental certification will be marked with Forest

Stewardship Council (FSC) Chain of Custody Certificate Code to ensure wood components come from certified forests and are processed by certified chain-of-custody manufacturers.

1.5.1.2.2 Vendor Qualifications: A vendor that is certified for chain of custody by an FSC-accredited certification body. Vendors installing FSC doors are not required to be FSC COC certified unless modifying the product beyond what is required for installation purposes.

1.5.2 Single Source Requirements: Doors shall be supplied from a single manufacturing organization.

1.6 DELIVERY, STORAGE, AND HANDLING

1.6.1 Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations of industry standards.

1.6.2 Store materials in manufacturer's original sealed, labeled packaging until ready for installation and in accordance with manufacturer's instructions. Protect from damage.

1.6.3 Store and protect doors in accordance with manufacturer's recommendations including but not limited to the following.1.6.3.1 Compliance: WDMA Standards.1.6.3.2 Store doors flat and off the floor on a level surface in a dry, well-ventilated

building. Do not store on edge. Protect/cover doors from dirt, water and abuse.1.6.3.3 Certain wood species are light sensitive. Protect doors from exposure to light

(artificial or natural) after delivery.1.6.3.4 When handling doors, always lift and carry. Do not drag across other doors or

surfaces. Handle with clean hands or gloves.1.6.3.5 Each door will be marked on top rail with opening number.

1.7 PROJECT CONDITIONS

1.7.1 Maintain environmental conditions (temperature, humidity and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.1.7.1.1 Environmental Limits: Do not deliver or install doors until spaces are enclosed

and weather tight, wet work in spaces is complete and dry, and HVAC system is operating and maintaining temperature between 60 and 90 degrees F (16 and 32 degrees C) and relative humidity between 25 and 55 percent during remainder of construction period.

1.8 WARRANTY

1.8.1 Special Warranty: Manufacturer agrees to repair or replace doors that fail in materials or workmanship within specified warranty period.

08 14 00-4

1.8.1.1 Failures include, but are not limited to, the following:1.8.1.1.1 Warping (bow, cup, or twist) more than 1/4 inch (6.4 mm) in a 42-by-84-

inch (1067-by-2134-mm) section.1.8.1.1.2 Telegraphing of core construction in face veneers exceeding 0.01 inch in a

3-inch (0.25 mm in a 76.2-mm) span.

1.8.2 Architectural Series Solid Core Doors:1.8.2.1 Door Warranty - Life of the Original Installation.1.8.2.2 Re-Finishing and Re-Hanging Allowances - Life of the Original Installation -

Mohawk will negotiate reasonable allowances provided the doors have been inspected and approved by an authorized representative of Mohawk. Mohawk is not obligated to honor any aspect of this warranty, if the reason for which the door is being rejected was apparent prior to hanging. Mohawk, at the company's discretion, will satisfy any legitimate claim, by repairing the door when possible, replacing the door as originally ordered, or by refunding the original sale price of the door.

1.8.3 Commercial Series Solid Core Doors:1.8.3.1 Door Warranty - Life of the Original Installation - (Excludes All Hollow Core

Doors, and All Bifold Doors).1.8.3.2 Re-Finishing and Re-Hanging Allowances - Within 12 Months of Mohawk Invoice

Date Only - Mohawk will negotiate reasonable allowances provided the doors have been inspected and approved by an authorized representative of Mohawk. Mohawk is not obligated to honor any aspect of this warranty, if the reason for which the door is being rejected was apparent prior to hanging. Mohawk, at the company's discretion, will satisfy any legitimate claim, by repairing the door when possible, replacing the door as originally ordered, or by refunding the original sale price of the door.

1.8.4 Commercial Series Standard Hollow Core, Commercial Hollow Core, and Hollow Core/Solid Core Bifolds:1.8.4.1 Door Warranty - One Year of Invoice Date1.8.4.2 Re-Finishing and Re-Hanging Allowances - Within 12 Months of Mohawk Invoice

Date Only - Mohawk will negotiate reasonable allowances provided the doors have been inspected and approved by an authorized representative of Mohawk. Mohawk is not obligated to honor any aspect of this warranty, if the reason for which the door is being rejected was apparent prior to hanging. Mohawk, at the company's discretion, will satisfy any legitimate claim, by repairing the door when possible, replacing the door as originally ordered, or by refunding the original sale price of the door.

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: Mohawk, which is located at: 980 Point Township Rd. Point Township P. O. Box 112; Northumberland, PA 17857; Tel: 570-473-3557; Fax: 570-473-3737; Email:request info ([email protected]); Web:www.mohawkdoors.com

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 DOORS - GENERAL

2.2.1 Quality Standard:

08 14 00-5

2.2.1.1 Stile and Rail Wood Doors: Comply with WDMA I.S. 6A-13, "Industry Standard for Interior Architectural Stile and Rail Doors."

2.2.1.2 Flush Wood Doors: Comply with WDMA I.S. 1A-13, "Industry Standard for Interior Architectural Wood Flush Doors."

2.2.1.2.1 Grade LD-1.2.2.1.2.2 Grade LD-2.

2.2.2 Wood-Based Particleboard-Core Doors:2.2.2.1 Provide wood-based particleboard core doors with a minimum density per ANSI

A208.1,

2.2.3 Structural-Composite-Lumber-Core Doors:2.2.3.1 Provide Structural Composite Lumber core as required to meet WDMA

Performance Duty Level required.2.2.3.2 Provide Structural Composite Lumber core for doors with glass openings as

required to meet stile dimensions shown on door schedule and elevations.2.2.3.3 Provide Structural Composite Lumber core for all doors with the exception of 45

to 90 minute fire rated and sound rated doors.2.2.3.4 Top and Bottom Rails: Mill Option including; Softwood, Hardwood, or SCL. MDF

rails are not acceptable. Rails are not required per WDMA standards.2.2.3.5 Structural Composite Lumber: WDMA T.M.10.

2.2.3.5.1 Screw Withdrawal, Face: Per standard.2.2.3.5.2 Screw Withdrawal, Edge: Per standard.

2.2.4 Stave Lumber Core Doors:2.2.4.1 Mill option finger jointed or butt glued wood block pine, fir, or poplar. Lumber

density is 25 to 27 lbs per cubic foot.2.2.4.2 FSC/No UF Stave Lumber Core.

2.2.5 Standard Hollow Core: 5-7 inches (127-178 mm) Honeycomb Flexigrid. 1-1/4 inches (32 mm) stiles and rails prior to trimming.

2.2.6 Commercial Hollow Core: 2-3 inches (64 mm) Honeycomb Flexigrid. 2-1/2 inches (64 mm) softwood stiles and rails-prior to trimming.

2.2.7 AgriFiber Core: LD-1 produced from Rapidly Renewable wheat straw.

2.2.8 Sustainability Requirements:2.2.8.1 Regional Materials: Where available based on inclusive list of approved

manufacturers, flush wood doors shall be manufactured within 500 miles (800 km) of Project site from materials that have been extracted, harvested, or recovered, as well as manufactured, within 500 miles (800 km) of Project site.

2.2.8.2 Certified Wood: Flush wood doors shall be certified according to FSC STD-01-001, "FSC Principles and Criteria for Forest Stewardship," and to FSC STD-40-004, "FSC Standard for Chain of Custody Certification." FSC claims are to be based on "new" wood contribution only. All recycled, reclaimed, and recovered material, even if it is FSC Recycled, shall be applied towards the MR 4 credit.

2.2.8.3 Low-Emitting Materials: Fabricate doors with adhesives and composite wood products that do not contain added urea formaldehyde.

2.2.8.4 Low-Emitting Materials: Fabricate doors that comply with the testing and product requirements of the California Department of Health Services' "Standard Practice for the Testing of Volatile Organic Emissions from Various Sources Using Small-Scale Environmental Chambers." All composite wood and agrifiber products shall meet this requirement. Prefer products that are third party certified through SCS Indoor Advantage Gold.

2.2.9 Fire-Rated Wood Doors: Doors complying with NFPA 80 that are listed and labeled by a

08 14 00-6

qualified testing agency, for fire-protection ratings indicated, based on testing at positive pressure according to NFPA 252 or UL 10C required by Authority Having Jurisdiction (AHJ).2.2.9.1 Label Certification: Doors requiring fire-rating will carry either UL or ITS

(Warnock Hersey) label. Manufacturer's certification labels may be used for door size variations if approved by AHJ (Authority Having Jurisdiction).

2.2.9.2 Temperature-Rise Limit: Where indicated and at vertical exit enclosures and exit passageways, provide doors that have a maximum transmitted temperature end point of not more than 250 degrees F (121 degrees C) above ambient after 30 minutes of standard fire-test exposure.

2.2.9.3 20 Minute Rated Door Lite Openings: Maximum 1296 sq/in (8361 sq/cm) 36 inches W and 54 inches - H (914 mm and 1372 mm) with approved intumescent lined cut- out.

2.2.9.4 Cores: 45 Minute Particleboard-Core. Extra Heavy Duty 1-3/4 inches (44 mm) door only.

2.2.9.5 Cores: 45, 60, 90 Minute Mineral Core. Non-Asbestos material.2.2.9.6 Cores: 20 and 45 Minute AgriFiber.2.2.9.7 Blocking: Provide composite blocking approved for use in doors of fire-protection

ratings indicated as needed to maintain WDMA performance level and eliminate through-bolting hardware.

2.2.9.8 Edge Construction: Category A - intumescent included in door construction where required.

2.2.9.9 Edge Construction: Category B - intumescent applied to frames by door installer where required.

2.2.9.10 Pairs: Provide fire-retardant stiles that are listed and labeled for applications indicated without formed-steel edges and astragals.

2.2.9.11 Pairs: Provide formed-steel edges and astragals with intumescent seals as required.

2.2.9.11.1 Provide steel edges and astragals primed for field painting.2.2.9.11.2 Provide veneer wrapped steel edges and astragals. Veneer shall be same

specie as face.2.2.9.11.3 Finish steel edges and astragals with baked enamel, color as selected

from manufacturer's standard offering.2.2.9.11.4 Provide stainless steel edges and astragals.

2.2.10 Smoke and Draft Control Door Assemblies: Listed and labeled for smoke and draft control, based on testing according to UL 1784.

2.3 WOOD VENEER FACED DOORS

2.3.1 Commercial Interior Doors:2.3.1.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk; "Commercial Series" or a comparable product by one of the following:2.3.1.1.1 Algoma.2.3.1.1.2 Marshfield.2.3.1.1.3 Baillargeon.

2.3.1.2 Veneer Grade: A (best suited for most commercial applications).2.3.1.3 Veneer Cut: Rotary.2.3.1.4 Veneer Cut: Plain Sliced (Flat Sliced).2.3.1.5 Veneer Cut: Quarter Sliced.2.3.1.6 Veneer Cut: Rift Cut.2.3.1.7 Veneer Matching: Book Match.2.3.1.8 Veneer Matching: Slip Match.2.3.1.9 Veneer Matching: Random Match.2.3.1.10 Assembly of Veneer Leaves on Faces: Running Match.2.3.1.11 Assembly of Veneer Leaves on Faces: Balance Match.2.3.1.12 Assembly of Veneer Leaves on Faces: Center Balance Match.

08 14 00-7

2.3.1.13 Special Veneer Selection: Select Veneers for similar color.2.3.1.14 Special Veneer Selection: Select Veneers for similar grain.2.3.1.15 Special Veneer Selection: Select Veneers for similar color and grain.2.3.1.16 Pair and Set Match: Provide matching for door hung in same opening or

separated only by mullions. Provide sets up to four doors.2.3.1.17 Species: Natural Birch.2.3.1.18 Species: Select White Birch.2.3.1.19 Species: Red Oak.2.3.1.20 Species: White Oak.2.3.1.21 Species: Natural Maple.2.3.1.22 Species: Select White Maple.2.3.1.23 Species: Cherry.2.3.1.24 Species: Natural Ash.2.3.1.25 Species: Select White Ash.2.3.1.26 Species: African Mahogany.2.3.1.27 Species: Walnut.2.3.1.28 Transom Match: End Match.2.3.1.29 Transom Match: Continuous Match.2.3.1.30 WDMA I.S.1A-13 Performance Grade: Heavy Duty.2.3.1.31 WDMA I.S.1A-13 Glue Bond: Type II.2.3.1.32 WDMA I.S.1A-13 Glue Bond: Type I.2.3.1.33 Exposed Vertical Edges: Mill option softwood.2.3.1.34 Exposed Vertical Edges: Mill option close grained hardwood.2.3.1.35 Exposed Vertical Edges: Compatible/Matching Veneer.2.3.1.36 Exposed Rail Edges: Mill option softwood or SCL.2.3.1.37 Exposed Rail Edges: Mill option hardwood.2.3.1.38 Core: As specified or required by schedule.2.3.1.39 Floating Construction: 5-ply, Loose-lay, stiles and rails not bonded to core.2.3.1.40 Bonded Construction: 5-ply, edges bonded to core, and then entire unit abrasive

planed before veneering.2.3.1.41 Door Thickness 1-3/4 inch (44mm) or 1-3/8 inch (35mm) as scheduled.2.3.1.42 Finishing: Factory Finish.2.3.1.43 Finishing: Field/Shop Finish.2.3.1.44 All doors shall meet specified WDMA Performance Duty Level, including face

screw holding requirement. Surface applied hardware shall be installed with screws; through bolts are not acceptable.

2.3.1.45 All doors shall meet specified WDMA Performance Duty Level, with the exception of face screw holding requirement. Surface applied hardware shall be installed with through bolts.

2.3.2 Architectural Interior Doors:2.3.2.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk; "Architectural Series" or a comparable product by one of the following:2.3.2.1.1 Algoma.2.3.2.1.2 Marshfield.2.3.2.1.3 Baillargeon.

2.3.2.2 Veneer Grade: A (best suited for most commercial applications).2.3.2.3 Veneer Grade: AA (reserved for high-end specialty applications).2.3.2.4 Veneer Cut: Rotary.2.3.2.5 Veneer Cut: Plain Sliced (Flat Sliced).2.3.2.6 Veneer Cut: Quarter Sliced.2.3.2.7 Veneer Cut: Rift Cut.2.3.2.8 Veneer Matching: Book Match.2.3.2.9 Veneer Matching: Slip Match.2.3.2.10 Veneer Matching: Random Match.2.3.2.11 Assembly of Veneer Leaves on Faces: Running Match (standard).

08 14 00-8

2.3.2.12 Assembly of Veneer Leaves on Faces: Book Match.2.3.2.13 Assembly of Veneer Leaves on Faces: Center Balance Match.2.3.2.14 Special Veneer Selection: None required.2.3.2.15 Special Veneer Selection: Select veneers for similar color.2.3.2.16 Special Veneer Selection: Select veneers for similar grain.2.3.2.17 Special Veneer Selection: Select veneers for color and grain.2.3.2.18 Special Veneer Selection: Select veneers for figured grain.2.3.2.19 Special Veneer Selection: Select veneers from supplier and lot number as

determined by Architect.2.3.2.20 Special Veneer Selection: Select inner flitch leaf widths as determined by

Architect.2.3.2.21 Species: Natural Birch.2.3.2.22 Species: Select White Birch.2.3.2.23 Species: Red Oak.2.3.2.24 Species: White Oak.2.3.2.25 Species: Natural Maple.2.3.2.26 Species: Select White Maple.2.3.2.27 Species: Cherry.2.3.2.28 Species: Natural Ash.2.3.2.29 Species: Select White Ash.2.3.2.30 Species: African Mahogany.2.3.2.31 Species: Walnut.2.3.2.32 Species: Sapele.2.3.2.33 Species: Aniegre.2.3.2.34 Species: As selected by architect.2.3.2.35 Transom Match: Continuous.2.3.2.36 WDMA I.S.1A-13 Aesthetic Grade: Premium Grade.2.3.2.37 WDMA I.S.1A-13 Performance Grade: Extra Heavy Duty (PC-5).2.3.2.38 WDMA I.S.1A-13 Glue Bond: Type I.2.3.2.39 Exposed Vertical Edges: Veneer- compatible/matching edge bonded to structural

composite lumber.2.3.2.40 Exposed Vertical Edges: Two-piece laminated or solid lumber

compatible/matching with face veneer.2.3.2.41 Exposed Rail Edges: SCL.2.3.2.42 Exposed Rail Edges: Mill option lumber.2.3.2.43 Core: As specified or required by schedule.2.3.2.44 Bonded Construction: 5-ply. Stiles and rails are bonded to core, and then entire

unit is abrasive planed before veneering.2.3.2.45 Door Thickness: 1-3/4 inch (44mm) or 1-3/8 inch (35mm) as scheduled.2.3.2.46 Finishing: Factory Finished.2.3.2.47 Finishing: Field/Shop Finished.2.3.2.48 All doors shall meet specified WDMA Performance Duty Level, including face



2.3.3 Interior Bi-folds: 2-Door, 4-Door, Hollow Core and Solid Core as scheduled. Packaged with Johnson 1825 (HC) and Johnson 100 (SC) series hardware.

2.4 HIGH PRESSURE DECORATIVE LAMINATE (HPDL) FACED DOORS

2.4.1 HPDL Doors:2.4.1.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk "Architectural Series" or a comparable product by one of the following:

08 14 00-9

2.4.1.1.1 Algoma.2.4.1.1.2 Marshfield.2.4.1.1.3 Baillargeon.

2.4.1.2 HPDL Face: High-Pressure Decorative Laminates complying with NEMA LD 3, Grade HGS. Vertical and post formable grade laminates are not acceptable.

2.4.1.2.1 Colors, Patterns and Finishes: As indicated on drawings or schedules.2.4.1.2.2 Colors, Patterns and Finishes: As scheduled from Wilson Art products.2.4.1.2.3 Colors, Patterns and Finishes: As scheduled from Formica products.2.4.1.2.4 Colors, Patterns and Finishes: As scheduled from Nevamar products.

2.4.1.3 WDMA I.S.1A-13 Aesthetic Grade: Premium Grade.2.4.1.4 WDMA I.S.1A-13 Performance Grade: Heavy Duty.2.4.1.5 WDMA I.S.1A-13 Performance Grade: Extra Heavy Duty.2.4.1.6 WDMA I.S.1A-13 Glue Bond: Type II.2.4.1.7 WDMA I.S.1A-13 Glue Bond: Type I.2.4.1.8 Exposed Vertical Edges: Mill option softwood painted or stained.2.4.1.9 Exposed Vertical Edges: Mill option hardwood painted or stained.2.4.1.10 Exposed Vertical Edges: Mill option lumber or SCL with Plastic laminate applied

after faces.2.4.1.11 Exposed Rail Edges: Mill option lumber or SCL.2.4.1.12 Exposed Rail Edges: Mill option hardwood.2.4.1.13 Core: As specified or required by schedule.2.4.1.14 Bonded Construction: 3-ply. Stiles and rails are bonded to core, and then entire

unit is abrasive planed before faces are applied.2.4.1.15 Door Thickness: 1-3/4 inch (44mm) or 1-3/8 inch (35mm) as scheduled.2.4.1.16 All doors shall meet specified WDMA Performance Duty Level, including face



2.5 PANEL DOORS

2.5.1 Hardboard Quality Standards: Embossed "Rustic" Hardboard by Mohawk will be Class 2. Smooth Tempered Hardboard will be Class 1, with the following minimum specifications as outlined in ANSI/AHA A135.4 or most recent edition. No HDF will be allowed. The properties shall be determined in accordance with the applicable test methods in part B of ASTM D 1037-93 or most recent edition.2.5.1.1 Nominal Thickness to between 1/8 inch and 1/4 inch (3.2mm to 6.4mm).2.5.1.2 Minimum average Tensile Strength per door face will be 3000 psi (20.7 Mpa)

Parallel to the surface, 130 psi (0.90 Mpa) Perpendicular to the surface.

2.5.2 Hardboard Panel Doors:2.5.2.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk Commercial Series or a comparable product by one of the following:2.5.2.1.1 Algoma.2.5.2.1.2 Marshfield.2.5.2.1.3 Baillargeon.

2.5.2.2 Type: Smooth Tempered Hardboard Panel Doors.2.5.2.3 Type: Embossed Rustic Hardboard Panel Doors. (finished product).

2.5.2.3.1 Finish Selection: Rustic Oak.2.5.2.3.2 Finish Selection: Rustic Lite Oak.2.5.2.3.3 Finish Selection: Rustic Golden Oak.2.5.2.3.4 Finish Selection: Rustic Walnut.2.5.2.3.5 Finish Selection: Rustic Classic Autumn Oak.2.5.2.3.6 Finish Selection: Rustic Classic Mahogany.

08 14 00-10

2.5.2.3.7 Finish Selection: Rustic Classic Gray.2.5.2.4 Type: Medium Density Overlay (MDO). Panel Doors2.5.2.5 WDMA I.S.1A-13 Aesthetic Grade: Custom Grade.2.5.2.6 WDMA I.S.1A-13 Performance Grade: Extra Heavy Duty.2.5.2.7 WDMA I.S.1A-13 Performance Grade: Heavy Duty.2.5.2.8 WDMA I.S.1A-13 Glue Bond: Type II.2.5.2.9 WDMA I.S.1A-13 Glue Bond: Type I.2.5.2.10 Exposed Vertical Edges: Finger Jointed Softwood for paint or stain.2.5.2.11 Exposed Vertical Edges: Mill option hardwood, solid or laminated for paint or

stain.2.5.2.12 Exposed Rail Edges: Mill option lumber or SCL.2.5.2.13 Exposed Rail Edges: Mill option hardwood.2.5.2.14 Cores: As specified or as required by schedule.2.5.2.15 Floating Construction: 3-ply. Loose-lay, stiles and rails not bonded to core.2.5.2.16 Bonded Construction: 3-ply. Stiles and rails are bonded to core, and then the

entire unit is abrasive planed before faces are applied.2.5.2.17 Door Thickness: 1-3/4 inch (44mm) or 1-3/8 inch (35mm) as scheduled.2.5.2.18 Finish: Factory finish.2.5.2.19 Finish: Field/Shop finish.2.5.2.20 All doors shall meet specified WDMA Performance Duty Level, including face



2.5.3 Interior Bi-folds: 2-Door, 4-Door, Hollow Core and Solid Core as scheduled. Packaged with Johnson 1825 (HC) and Johnson 100 (SC) series hardware.

2.6 MOLDED PANEL DOORS

2.6.1 Residential Interior Molded Panel Doors:2.6.1.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk "Residential Molded Panel Series" or a comparable product by one of the following:


2.6.1.2 Style: Molded Panel Series: Two Panel Smooth.2.6.1.3 Style: Molded Panel Series: Two Panel Textured.2.6.1.4 Style: Molded Panel Series: Two Panel Arch Top Smooth.2.6.1.5 Style: Molded Panel Series: Two Panel Arch Top Textured.2.6.1.6 Style: Molded Panel Series: Two Panel Roman.2.6.1.7 Style: Molded Panel Series: Four Panel Smooth2.6.1.8 Style: Molded Panel Series: Four Panel Textured.2.6.1.9 Style: Molded Panel Series: Four Panel Arch Top Smooth.2.6.1.10 Style: Molded Panel Series: Four Panel Arch Top Textured.2.6.1.11 Style: Molded Panel Series: Six Panel Smooth.2.6.1.12 Style: Molded Panel Series: Six Panel Textured.2.6.1.13 Style: Palazzo Series: Bellagio Two Arch Panel. (Raised Molding).2.6.1.14 Style: Palazzo Series: Capri Two Square Panel. (Raised Molding).2.6.1.15 Style: Palazzo Series: Treviso Three Panel Arch Top. (Raised Molding).2.6.1.16 Style: Anniversary Collection: Cheyenne 2-panel Plank Smooth.2.6.1.17 Style: Anniversary Collection: Glenview 3-panel Craftsman.2.6.1.18 Style: Anniversary Collection: Riverside 5-panel Equal Smooth.2.6.1.19 Style: Anniversary Collection: Saddlebrooke 1-Panel Planked.

08 14 00-11

2.6.1.20 Style: West End Series: Melrose.2.6.1.21 Style: West End Series: Berkley.2.6.1.22 Style: West End Series: Hamel.2.6.1.23 WDMA I.S.1A-13 Aesthetic Grade: Custom Grade.2.6.1.24 WDMA I.S.1A-13 Performance Grade: Heavy Duty.2.6.1.25 WDMA I.S.1A-13 Performance Grade: Extra Heavy Duty.2.6.1.26 WDMA I.S.1A-13 Glue Bond: Type II.2.6.1.27 WDMA I.S.1A-13 Glue Bond: Type I.2.6.1.28 Exposed Vertical Edges: Mill option softwood for painting.2.6.1.29 Exposed Vertical Edges: Mill option hardwood or SCL. Vertical edges can be

one-piece, laminated lumber, or sold lumber.2.6.1.30 Exposed Rail Edges: Mill option lumber or SCL.2.6.1.31 Cores: As specified or required by schedule.2.6.1.32 Floating Construction: 3-ply. Loose-lay, stiles and rails not bonded to core.2.6.1.33 Bonded Construction: 3-ply: stiles and rails are bonded to core, and then entire

unit is abrasive planed before faces are applied.2.6.1.34 Door Thickness: 1-3/4 inch (44mm) or 1-3/8 inch (35mm) as scheduled.2.6.1.35 Finish: Factory finish (paint only).2.6.1.36 Finish: Field/Shop finish.2.6.1.37 All doors shall meet specified WDMA Performance Duty Level, including face

screw holding requirement. Surface applied hardware shall be installed with screws, through bolts are not permitted.

2.6.1.38 All doors shall meet specified WDMA Performance Duty Levels, with the exception of face screw holding requirement. Surface applied hardware shall be installed with through bolts.

2.6.2 Commercial Interior Molded Panel Doors:2.6.2.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk "Commercial Molded Series" (3-Ply Commercial Series Construction) or a comparable product by one of the following:


2.6.2.2 Style: Commercial Series: Two Panel Smooth.2.6.2.3 Style: Commercial Series: Two Panel Roman Smooth.2.6.2.4 Style: Commercial Series: Two Panel Arch Top Smooth.2.6.2.5 Style: Commercial Series: Six Panel Commercial Smooth.2.6.2.6 Style: West End Series: Melrose.2.6.2.7 Style: West End Series: Berkley.2.6.2.8 Style: West end Series: Hamel.2.6.2.9 WDMA I.S.1A-13 Aesthetic Grade: Custom Grade.2.6.2.10 WDMA I.S.1A-13 Performance Grade: Heavy Duty.2.6.2.11 WDMA I.S.1A-13 Performance Grade: Extra Heavy Duty.2.6.2.12 WDMA I.S.1A-13 Glue Bond: Type II.2.6.2.13 WDMA I.S.1A-13 Glue Bond: Type I.2.6.2.14 Exposed Vertical Edges: Mill option softwood for painting.2.6.2.15 Exposed Vertical Edges: Mill option hardwood or SCL. Vertical edges can be

one-piece, laminated lumber, or solid lumber.2.6.2.16 Exposed Rail Edges: Mill option lumber or SCL.2.6.2.17 Cores: As specified or required by schedule.2.6.2.18 Floating Construction: 3-ply. Loose-lay, Stiles and rails not bonded to core.2.6.2.19 Bonded Construction: 3-ply. Stiles and rails are bonded to core, and then entire

unit is abrasive planed before faces are applied.2.6.2.20 Door Thickness: 1-3/4 (44mm) or 1-3/8 (35mm) as scheduled.2.6.2.21 Finish: Factory finish (paint only).2.6.2.22 Finish: Field/Shop finish.

08 14 00-12

2.6.2.23 All doors shall meet specified WDMA Performance Duty Level, including face screw holding requirement. Surface applied hardware shall be installed with screws; through bolts are not acceptable.


2.6.3 Interior Bi-folds: 2-Door, 4-Door, Hollow Core and Solid Core as scheduled.Packaged with Johnson 1825 (HC) and Johnson 100 (SC) series hardware.

2.7 DECORATIVE PANEL DOORS

2.7.1 Paint Grade Panel Doors:2.7.1.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk "Portrait Collection" (5-Ply Commercial Series Construction) or a comparable product by one of the following:


2.7.1.2 Face: 1/8 inch (3mm) Tempered Hardboard.2.7.1.3 Face: 2-Ply WDMA "A" grade Birch.2.7.1.4 Face: 2-Ply Medium Density Overlay (MDO).2.7.1.5 Panel Design: Refer to Drawings.2.7.1.6 Raised/Recessed Molding: Solid hardwoods.2.7.1.7 WDMA I.S.1A-13 Aesthetic Grade: Custom Grade.2.7.1.8 WDMA I.S.1A-13 Performance Grade: Heavy Duty.2.7.1.9 WDMA I.S.1A-13 Performance Grade: Extra Heavy Duty Grade.2.7.1.10 WDMA I.S.1A-13 Glue Bond: Type II.2.7.1.11 WDMA I.S.1A-13 Glue Bond: Type I.2.7.1.12 Exposed Vertical Edge: Mill option softwood.2.7.1.13 Exposed Vertical Edge: Mill option hardwood or SCL. Vertical edges can be one-

piece, laminated lumber or solid lumber.2.7.1.14 Exposed Rail Edges: Mill option lumber or SCL.2.7.1.15 Cores: As specified or required by schedules.2.7.1.16 Floating Construction: 3-Ply. Loose-lay, stiles and rails not bonded to core)

[Tempered Hardboard].2.7.1.17 Bonded Construction: 3-Ply. Stiles and rails are bonded to core, and then entire

unit is abrasive planed before faces are applied. (Tempered Hardboard).2.7.1.18 Floating Construction: 5-Ply. Loose-lay, stiles and rails not bonded to core)

[Birch or MDO].2.7.1.19 Bonded Construction: 5-Ply. Stiles and rails are bonded to core, and then entire

unit is abrasive planed before veneering. (Birch or MDO).2.7.1.20 Door Thickness: 1-3/4 inch (44mm) or 1-3/8 inch (35mm) as scheduled.2.7.1.21 Finish: Factory Finish (paint only).2.7.1.22 Finish: Field/Shop Finish.2.7.1.23 All doors shall meet specified WDMA Performance Duty Level, including face



2.7.2 Wood Veneer Panel Doors:2.7.2.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk "Masterpiece Series" (Architectural Series Construction) or a comparable product by one of the following:

08 14 00-13


2.7.2.2 Veneer Species: Match faces specified for other doors on project.2.7.2.3 Veneer Grade: A.2.7.2.4 Veneer Grade: AA.2.7.2.5 Veneer Cut: Rotary2.7.2.6 Veneer Cut: Plain Sliced (Flat Sliced).2.7.2.7 Veneer Cut: Quarter Sliced.2.7.2.8 Veneer Cut: Rift Cut.2.7.2.9 Veneer Matching: Book Match.2.7.2.10 Veneer Matching: Slip Match.2.7.2.11 Veneer Matching: Random Match.2.7.2.12 Assembly of Veneer Leaves on Faces: Running Match (standard).2.7.2.13 Assembly of Veneer Leaves on Faces: Balance Match.2.7.2.14 Assembly of Veneer Leaves on Faces: Center Balance Match.2.7.2.15 Special Veneer Selection: None required.2.7.2.16 Special Veneer Selection: Select veneers for similar color.2.7.2.17 Special Veneer Selection: Select veneers for similar grain.2.7.2.18 Special Veneer Selection: Select veneers for similar color and grain.2.7.2.19 Special Veneer Selection: Select veneers for figured grain.2.7.2.20 Special Veneer Selection: Select veneers from supplier and lot number as


Architect.2.7.2.22 Species: Natural Birch.2.7.2.23 Species: Select White Birch.2.7.2.24 Species: Red Oak.2.7.2.25 Species: White Oak.2.7.2.26 Species: Natural Maple.2.7.2.27 Species: Select White Maple.2.7.2.28 Species: Cherry.2.7.2.29 Species: Natural Ash.2.7.2.30 Species: Select White Ash.2.7.2.31 Species: African Mahogany.2.7.2.32 Species: Walnut.2.7.2.33 Species: Sapele.2.7.2.34 Species: Aniegre.2.7.2.35 Species: As selected by Architect.2.7.2.36 Transom Match: End Match.2.7.2.37 Transom Match: Continuous Match.2.7.2.38 Panel Design: Refer to drawings.2.7.2.39 Raised/Recessed Molding: Solid compatible/matching hardwood.2.7.2.40 WDMA I.S.1A-13 Aesthetic Grade: Premium Grade.2.7.2.41 WDMA I.S.1A-13 Performance Grade: Heavy Duty.2.7.2.42 WDMA I.S.1A-13 Performance Grade: Extra Heavy Duty.2.7.2.43 WDMA I.S.1A-13 Glue Bond: Type I.2.7.2.44 Exposed Vertical Edges: Veneer - compatible/matching edge bonded to

structural composite lumber.2.7.2.45 Exposed Vertical Edges: Two-piece laminated or solid lumber

compatible/matching face veneer.2.7.2.46 Exposed Rail Edges: SCL.2.7.2.47 Exposed Rail Edges: Mill option lumber.2.7.2.48 Core: As specified or required by schedule.2.7.2.49 Bonded Construction: 5-Ply, stiles and rails are bonded to core, and then entire

unit is abrasive planed before veneering.

08 14 00-14

2.7.2.50 Door Thickness: 1-3/4 inch (44mm) or 1-3/8 inch (35mm) as scheduled.2.7.2.51 Finishing: Factory Finish.2.7.2.52 Finishing: Field/Shop Finish.2.7.2.53 All doors shall meet specified WDMA Performance Duty Level, including face



2.7.3 Decorative Applied Molding Panel Doors:2.7.3.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk "Applied Decorative Door Molding" or a comparable product by one of the following:


2.7.3.2 Faces: 1/8 inch (3mm) Tempered Hardboard).2.7.3.3 Faces: 2-Plly Medium Density Overlay (MDO).2.7.3.4 Veneer Grade: A.2.7.3.5 Veneer Grade: AA.2.7.3.6 Veneer Cut: Rotary.2.7.3.7 Veneer Cut: Plain Sliced (Flat Sliced).2.7.3.8 Veneer Cut: Quarter Sliced.2.7.3.9 Veneer Cut: Rift Cut.2.7.3.10 Veneer Matching: Book Match.2.7.3.11 Veneer Matching: Slip Match.2.7.3.12 Veneer Matching: Random Match.2.7.3.13 Assembly of Veneer Leaves on Faces: Running Match (standard).2.7.3.14 Assembly of Veneer Leaves on Faces: Balance Match.2.7.3.15 Assembly of Veneer Leaves on Faces: Center Balance Match.2.7.3.16 Special Veneer Selection: Select veneers for similar color.2.7.3.17 Special Veneer Selection: Select veneers for similar grain.2.7.3.18 Special Veneer Selection: Select veneers for similar color and grain.2.7.3.19 Special Veneer Selection: Select veneers for figured grain.2.7.3.20 Special Veneer Selection: Select veneers from supplier and lot number as


Architect.2.7.3.22 Species: Natural Birch.2.7.3.23 Species: Select White Birch.2.7.3.24 Species: Red Oak.2.7.3.25 Species: White Oak.2.7.3.26 Species: Natural Maple.2.7.3.27 Species: Select White Maple.2.7.3.28 Species: Cherry.2.7.3.29 Species: Natural Ash.2.7.3.30 Species: Select White Ash.2.7.3.31 Species: African Mahogany.2.7.3.32 Species: Walnut.2.7.3.33 Species: Sapele.2.7.3.34 Species: Aniegre.2.7.3.35 Species: As selected by Architect.2.7.3.36 Transom Match: End Match.2.7.3.37 Transom Match: Continuous Match.2.7.3.38 Panel Design: MP2 - Two Panel.

08 14 00-15

2.7.3.39 Panel Design: MP3 - Three Panel.2.7.3.40 Panel Design: MP4 - Four Panel.2.7.3.41 Panel Design: MP6 - Six Panel.2.7.3.42 Panel Design: - Custom design as per drawings.2.7.3.43 Molding Profile: M3 - 1-3/8 inches by 5/8 inches.2.7.3.44 Molding Profile: M4 - 1-3/4 inches by 3/4 inches.2.7.3.45 Molding Profile: M5 - 1-3/8 inches by 5/8 inches.2.7.3.46 Molding Profile: M6 - 1-1/2 inches by 3/8 inches.2.7.3.47 Molding Profile: M7 - 1-3/4 inches by 3/4 inches.2.7.3.48 Molding Profile: Custom profile, refer to drawings.2.7.3.49 WDMA I.S.1A-13 Aesthetic Grade: Custom.2.7.3.50 WDMA I.S.1A-13 Performance Grade: Heavy Duty.2.7.3.51 WDMA I.S.1A-13 Performance Grade: Extra Heavy Duty.2.7.3.52 WDMA I.S.1A-13 Glue Bond: Type II.2.7.3.53 WDMA I.S.1A-13 Glue Bond: Type I.2.7.3.54 Exposed Vertical Edges: Mill option softwood for painting.2.7.3.55 Exposed Vertical Edges: Mill option hardwood for painting. Two-piece laminated

or solid lumber.2.7.3.56 Exposed Vertical Edges: Veneer compatible/matching face veneer bonded to

structural composite lumber.2.7.3.57 Exposed Vertical Edges: Two-piece laminated or solid lumber

compatible/matching with face veneer.2.7.3.58 Exposed Rail Edges: SCL.2.7.3.59 Exposed Rail Edges: Mill option lumber.2.7.3.60 Core: As specified or required by schedule.2.7.3.61 Floating Construction: 3-Ply, loose-lay, stiles and rails not bonded to core.2.7.3.62 Bonded Construction: 3-Ply, stiles and rails are bonded to core, and then entire

unit is abrasive planed before faces applied.2.7.3.63 Floating Construction: 5-Ply, loose-lay, stiles and rails not bonded to core.2.7.3.64 Bonded Construction: 5-Ply, stiles and rails are bonded to core, and then entire

unit is abrasive planed before veneering.2.7.3.65 Door Thickness: 1-3/4 inch (44mm) or 1-3/8 inch (35mm) as scheduled.2.7.3.66 Finishing: Factory Finish.2.7.3.67 Finishing: Field/Shop Finish.2.7.3.68 All doors shall meet specified WDMA Performance Duty Level, including face



2.8 DECORATIVE PANEL DOORS

2.8.1 Solid Panel "Simulated Stile and Rail" Wood Doors:2.8.1.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk "MDF" doors or a compatible product by one of the following:2.8.1.1.1 Algoma.2.8.1.1.2 Marshfield.2.8.1.1.3 Baillargeon.

2.8.2 MDF Doors:2.8.2.1 Size and Panel Types: Refer to drawings and specifications.2.8.2.2 WDMA I.S.1A-13 Performance Duty Level: Extra Heavy Duty.2.8.2.3 Door Thickness: 1-3/8 inches (35mm).2.8.2.4 Door Thickness: 1-3/4 inches (44mm).2.8.2.5 Door Core: Non-rated and 20 Minute: Medium Density Fiberboard:

08 14 00-16

2.8.2.6 Door Core: 45, 60 and 90 Minute: Fire resistant core.2.8.2.7 Simulated Raised Panel (CB).

2.8.2.7.1 Door Design: Select from manufacturers standard offerings. Product number ______.

2.8.2.7.2 Door Design: Custom. Refer to drawings.2.8.2.8 Tongue and Groove Planked Square Sticking (CBHT).


2.8.2.8.2 Door Design: Custom. Refer to drawings.2.8.2.9 Tongue and Groove Planked Door (CBSF).


2.8.2.9.2 Door Design: Custom. Refer to drawings.2.8.2.10 Stile and Rail Doors (CBPN).


2.8.2.11 French Doors (CBF).2.8.2.11.1 CBF 10-Lite.2.8.2.11.2 CBF 12-Lite.2.8.2.11.3 CBF 15-Lite.2.8.2.11.4 CBF 18-Lite.

2.8.2.12 French Door (CBF) Glass Style. (Tempered glass unless otherwise specified).2.8.2.12.1 Clear.2.8.2.12.2 Fluted glass.2.8.2.12.3 Rain glass.2.8.2.12.4 Frosted glass.2.8.2.12.5 Aquatex glass.

2.8.2.13 Louvered Doors.2.8.2.13.1 Door Design: Vented Flat.2.8.2.13.2 Door Design: False Louver both sides.2.8.2.13.3 Door Design: False louver one side.

2.8.2.14 Finish: Factory Primed.2.8.2.15 Finish: Factory Painted.

2.9 LIGHT FRAMES AND LOUVERS

2.9.1 Factory Glazing: Refer to Section 08 83 00 - Mirrors.2.9.1.1 Factory install glass as required.2.9.1.2 Factory install glass in fire rated doors only.2.9.1.3 Fill glazing bead nail holes in factory finished doors.2.9.1.4 Wood Beads for Light Openings in Wood Doors:

2.9.1.4.1 Wood Species: Provide manufacturer's standard flush wood beads unless otherwise indicated.

2.9.1.4.2 Wood Species: Same species as door faces.2.9.1.4.3 Wood Species: Species compatible with door faces.2.9.1.4.4 Wood Species: Any closed-grain hardwood.2.9.1.4.5 Profile: Flush rectangular beads for 1/8 inch (3 mm) and 1/4 inch (6 mm)

glazing, profile per Mohawk standard.2.9.1.4.6 Profile: Wood lip beads for 1/8 inch (3 mm) and 1/4 inch (6 mm) glazing,

profile per Mohawk standard.2.9.1.4.7 Profile: Wood lite insert for 1/8 inch (3 mm), 1/4 inch (6 mm) and 1/2 inch

(13 mm) glazing, profile per Mohawk standard.2.9.1.4.8 At wood-core doors with 20-minute fire-protection ratings, provide wood

beads and metal glazing clips as required and approved for such use.2.9.1.5 Light Openings in 20 Minute Fire-Rated Doors: Manufacturer's standard solid

wood-beads matching veneer species of door faces and approved for use in

08 14 00-17

doors of fire-protection rating indicated. Include concealed metal glazing clips where required for opening size and fire-protection rating indicated.

2.9.1.5.1 Profile: Lip per Mohawk standard.2.9.1.5.2 Profile: Flush per Mohawk standard.

2.9.1.6 Light Openings in Fire-Rated Doors: Manufacturer's standard low profile narrow metal frame formed of 18 ga. cold rolled steel, cold-rolled steel sheet approved for use in doors of fire-protection rating indicated. Model 110 as manufactured by All Metal Stamping, Inc.

2.9.1.6.1 Factory primed for paint.2.9.1.6.2 Wood veneer species matching door.

2.9.2 Wood Louvers: Hardwood louver with approximately 25% free air (of opening size). 1 inch (25 mm) lipped frame profile assembled with Phillips #6-1-1/2 inch brass-plated, self-tapping screws. All sizes available.2.9.2.1 Door manufacturer's standard solid-wood louvers unless otherwise indicated.2.9.2.2 Wood Species: Same species as door faces.2.9.2.3 Wood Species: Species compatible with door faces.2.9.2.4 Wood Species: Any closed-grain hardwood.2.9.2.5 Blade Type: Chevron.2.9.2.6 Blade Type: Flat slat.

2.9.3 Metal Louvers for Fire-Rated Doors:2.9.3.1 Metal louvers with fusible link and closing device, listed and labeled for use in

doors with fire-protection rating of 1-1/2 hours and less.2.9.3.2 Metal: 18 gauge cold rolled steel.2.9.3.3 Finish: Factory primed for paint finish applied in field.2.9.3.4 Finish: Factory painted with manufacturer's standard color baked-enamel- or

powder-coated finish.2.9.3.5 Finish: Factory painted with custom color baked enamel or powder coated finish.

2.10 LEAD LINED DOORS

2.10.1 Lead Lined Doors:2.10.1.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk Lead Line Doors or a comparable product by one of the following:2.10.1.1.1 Algoma.2.10.1.1.2 Marshfield.2.10.1.1.3 Baillargeon.

2.10.1.2 Application: Radiation and x-ray shielding.2.10.1.3 Maximum Size - Non-Rated: 4/0 x 8/0, 1 3/4 inch thickness only2.10.1.4 Maximum Size - Rated 20 Minute: 4/0 x 8/0 Single Max, 8/0 x 8/0 Pairs

Maximum.2.10.1.5 Face: Match design of other doors as specified and scheduled.2.10.1.6 Finish: Factory Finish2.10.1.7 Finish: Field/Shop Finished.2.10.1.8 Lead Thickness:

2.10.1.8.1 1/16 inch (1.6 mm)2.10.1.8.2 1/8 inch (3.2 mm)2.10.1.8.3 As indicated in door schedule.

2.10.1.9 Core: As specified or required by schedule.2.10.1.10 Adhesive: Type 1 only.2.10.1.11 Stiles - Non-Rated: 1-3/8 inches (35 mm) solid, two piece, or veneered securely

bonded to the core.2.10.1.12 Stiles - Rated 20 Minute: Double 1-5/32 inches (30 mm) Basswood securely

bonded to the core.2.10.1.13 Rails - Non-Rated: 1-1/8 inches (29 mm) wood securely bonded to the core.

08 14 00-18

2.10.1.14 Rails - Rated 20 Minute: 5 inches (127 mm) SCL securely bonded to the core.2.10.1.15 Fire Approvals: Rated openings with neutral and positive pressure as scheduled

or required.2.10.1.16 Lites: Sizes as scheduled. Glass shall be leaded glass as scheduled with

shielded lite frame.

2.11 ACOUSTICAL DOORS

2.11.1 Acoustic Rated Doors:2.11.1.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk "Sound Transmission Class (STC) Doors" or a comparable product by one of the following:


2.11.1.2 The Sound Transmission Class (STC) specified shall be certified by the manufacturer to be based on tests conducted at an independent testing agency in accordance with ASTM E90-90; ASTM E413-87; ASTM 1408 or ASTM E1425.

2.11.1.3 Acoustical Doors shall conform to the American National Standard, Acoustical Performance Criteria, Design Requirements and Guidelines for Schools, ANSI/ASA, S12.60. Doors into classrooms and other core learning spaces shall conform to the requirements of S12.60 with a minimum of a STC 30 operable rating. The STC rating for interior doors between classrooms and music rooms shall be not less than STC 40 operable.

2.11.1.4 STC Ratings shall be tested as Operable.2.11.1.5 Provide core as required to meet STC rating indicated on door schedule.2.11.1.6 Provide Gasketing, Door Shoe, Door Bottoms and thresholds as required to

meet manufacturer's tested acoustic rating. Gasketing, Door Seals and other hardware are not to be painted.

2.11.1.7 Factory install glazed lites in accordance with requirements of tested assembly to achieve STC rating indicated. Provide Anemostat LoPro-STC lite system.

2.11.1.8 Hollow metal frames shall be fully grouted or packed with mineral wool where acoustic rated wood doors are installed.

2.11.1.9 Door Face: Veneer to match other doors specified and scheduled.2.11.1.10 Door Face: Laminate to match other doors specified and scheduled.2.11.1.11 Door Face: Tempered Hardboard to match doors specified and scheduled.2.11.1.12 Door Face: Embossed Hardboard (Rustic Series) to match doors specified and

scheduled.2.11.1.13 Acoustic Rating: STC 24, non-rated or 20 Minute as indicated on schedule.2.11.1.14 Acoustic Rating: STC 26, non-rated or 20 Minute as indicated on schedule.2.11.1.15 Acoustic Rating: STC 29, non-rated, 20, 45, 60 or 90 Minute as indicated on

schedule.2.11.1.16 Acoustic Rating: STC 30, non-rated or 20 Minute as indicated on schedule.2.11.1.17 Acoustic Rating: STC 31, non-rated, 20, 45, 60 or 90 Minute as indicated on

schedule.2.11.1.18 Acoustic Rating: STC 32. non-rated, 20, 45, 60 or 90 Minute fire rated as

indicated on schedule.2.11.1.19 Acoustic Rating: STC 33, non-rated, 20, 45, 60 or 90 Minute fire rated as



indicated on schedule.2.11.1.22 Acoustic Rating: STC 37, non-rated, 20 or 45 Minute fire rated as indicated on

schedule.2.11.1.23 Acoustic Rating: STC 38, non-rated, 20, 45 or 60 Minute fire rated as indicated

08 14 00-19

on schedule.2.11.1.24 Acoustic Rating: STC 39, non-rated, 20 or 45 Minute fire rated as indicated on

schedule.2.11.1.25 Acoustic Rating: STC 40, with 100 square inch Narrow Lite, non-rated, 20 or 45

minute fire rated as indicated on schedule.2.11.1.26 Acoustic Rating: STC 40, non-rated, 20, 45 or 60 Minute fire rated as indicated

on schedule.2.11.1.27 Acoustic Rating: STC 45 (non-fire rated only).

2.12 MIRRORED DOORS

2.12.1 Mirrored Doors:2.12.1.1 Basis-of-Design Product: Subject to compliance with requirements, provide

Mohawk Mirrored Doors or a comparable product by one of the following:2.12.1.1.1 Algoma.2.12.1.1.2 Marshfield.

2.12.1.2 Design: Surface applied mirrors with surface applied molding.2.12.1.3 Design: Recessed mirror secured with flush molding.2.12.1.4 Mirror 1/8 inch (3 mm) float plate single strength glass.2.12.1.5 Maximum Door Sizes: 4/0 feet by 8/0 feet (1219 mm by 2438 mm) and 8/0 feet

by 8/0 feet (2438 mm by 2438 mm) pairs.2.12.1.6 Faces: Veneer to match other doors on project.2.12.1.7 Faces: Laminate to match other doors on project.2.12.1.8 Faces: Hardboard to match other doors on project.2.12.1.9 Faces: Molded panel one side/flat hardboard one side. Molded panel to match

other doors on project.2.12.1.10 Construction: WDMA Extra Heavy Duty.2.12.1.11 Core: Type LD2 particle core.2.12.1.12 Edges: Mill option softwood.2.12.1.13 Adhesive: Type II adhesive.2.12.1.14 Finish: Factory Finish.2.12.1.15 Finish: Field/Shop Finished.

2.13 FABRlCATlON

2.13.1 Factory machine doors for finish hardware in accordance with hardware requirements and dimensions. Do not machine doors for surface hardware.

2.13.2 Factory pre-drill all pilot holes for installation of template hinges.

2.13.3 Factory prefit doors for frame opening dimensions identified on shop drawings.

2.14 SHOP PRIMING

2.14.1 Doors for Opaque Finish: Shop prime all faces and vertical edges with one coat offactory primer.

2.15 FACTORY FINISHING

2.15.1 General: Comply with referenced quality standard for factory finishing. All doors to be finished at factory ( including faces, vertical edges, lite beads and moldings). Seal top and bottom rails as required for warranty purposes.2.15.1.1 Finish System:

2.15.1.1.1 Transparent Finish: Mohawk Premium 2000 Finish. WDMA I.S.1A-13 System TR-8. UV cured, acrylated polyester/urethane.

2.15.1.1.2 Opaque Finish: Mohawk Premium 2000 Finish. WDMA I.S.1A-13 System OP-8, UV cured acrylated polyester/urethane.

08 14 00-20

2.15.2 Transparent Finish:2.15.2.1 Grade Premium.2.15.2.2 Finish Stain: Clear.2.15.2.3 Finish Stain: Teak.2.15.2.4 Finish Stain: Red.2.15.2.5 Finish Stain: Brown2.15.2.6 Finish Stain: Dark Brown.2.15.2.7 Finish Stain: Walnut.2.15.2.8 Finish Stain: Mahogany.2.15.2.9 Finish Stain: Match Architect's sample.2.15.2.10 Sheen: Satin.2.15.2.11 Sheen: Other as selected.

2.15.3 Opaque Finish:2.15.3.1 Finish Color: Mohawk 2071 White.2.15.3.2 Finish Color: Mohawk L4000 White.2.15.3.3 Finish Color: Match Architect's sample.2.15.3.4 Sheen: Satin.2.15.3.5 Sheen: Other as selected.

3 EXECUTION

3.1 EXAMINATION AND PREPARATION

3.1.1 Examine and prepare openings and substrates using the methods recommended by manufacturer for achieving best result for the substrates under project conditions.3.1.1.1 Confirm that frames comply with type, size, location and swing requirements and

that they are installed plumb and square.3.1.1.2 Inspect doors for any damage, manufacturing defects or pre-finish inconsistency

prior to installation, including but not limited to wrong color or poor finish.

3.1.2 Do not proceed with installation until openings and substrates have been prepared using the methods recommended by manufacturer and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions.

3.1.3 If preparation is the responsibility of another installer, notify Architect in writing of deviations from manufacturer's recommended installation tolerances and conditions.

3.2 INSTALLATION

3.2.1 Hardware: For installation, refer to Section 08 71 53 - Security Door Hardware "Door Hardware."

3.2.2 Installation Instructions: Install doors to comply with manufacturer's written instructions and referenced quality standard, and as indicated.3.2.2.1 Install fire-rated doors according to NFPA 80.3.2.2.2 Install smoke- and draft-control doors according to NFPA 105.

3.2.3 Job-Fitted Doors: Align and fit doors in frames with uniform clearances and bevels as indicated below; do not trim stiles and rails in excess of limits set by manufacturer or permitted for fire-rated doors. Machine doors for hardware. Seal edges of doors, edges of cutouts, and mortises after fitting and machining.3.2.3.1 Clearances: Provide 1/8 inch (3.2 mm) at heads, jambs, and between pairs of

doors. Provide 1/8 inch (3.2 mm) from bottom of door to top of decorative floor finish or covering unless otherwise indicated. Where threshold is shown or scheduled, provide 1/4 inch (6.4 mm) from bottom of door to top of threshold

08 14 00-21

unless otherwise indicated.3.2.3.1.1 Comply with NFPA 80 for fire-rated doors.

3.2.3.2 Bevel non-fire-rated doors 1/8 inch in 2 inches (3-1/2 degrees) at lock and hinge edges.

3.2.3.3 Trim bottom rail only to extent permitted by labeling agency.

3.2.4 Factory-Fitted Doors: Align in frames for uniform clearance at each edge.

3.2.5 Factory-Finished Doors: Do not trim factory finished doors for width.

3.3 ADJUSTING

3.3.1 Operation: Correct any deficiency that prohibits the door from swinging or operating freely. Do not remove hinge screws after initial insertion. Shims used for alignment purposes shall be inserted between hinge and frame. Do not insert shims between hinge and door.

3.3.2 To prevent stile failure, insure that door closers are properly adjusted and do not limit the door opening swing. Limit door opening swing only with a properly located stop.

3.3.3 Finished Doors: Replace doors that are damaged or that do not comply with requirements. Doors may be repaired or refinished if Work complies with requirements and shows no evidence of repair or refinishing.

END OF SECTION

08 14 00-22

Documents

€¦ · Web viewIn addition to the above provide products that are third party certified through SCS Indoor Advantage Gold. Provide Data for Credit IEQ 9 - Enhanced Acoustical Performance: