· Web viewNuclear energy, nuclear technologies, and radiological protection ISO/DIS 8300 * Nuclear fuel technology — Determination of plutonium content in plutonium dioxide of

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 August to 31 August 2011

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 8 Ships and marine technology

ISO/NP 13643-5 Ships and marine technology — Manoeuvring of ships — Part 5: Submarine specials

ISO/CD 13643-6 Ships and marine technology — Manoeuvring of ships — Part 6: Model test specials

ISO/NP 16145-4 Ships and marine technology — Protective coatings and inspection method — Part 4: Measuring method of water soluble salts

TC 10 Technical product documentation

ISO/CD 11540-1 Writing and marking instruments — Part 1: Specification for caps to reduce the risk of asphyxiation

ISO/CD 11540-2 Writing and marking instruments — Part 2: Specification for end closures to reduce the risk of asphyxiaton

TC 20 Aircraft and space vehicles

ISO/CD 16697 Space systems — Safety and compatibility of materials - Method to determine the flammability thresholds of materials

ISO/CD 16698 Methods for estimation of future geomagnetic activity

TC 21 Equipment for fire protection and fire fighting

ISO 7240-24:2010/CD Amd 1

Fire detection and fire alarm systems — Part 24: Sound-system loudspeakers — Amendment 1

TC 33 Refractories

ISO/CD 5017 Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity

TC 38 Textiles

ISO/CD 20743 Textiles — Determination of antibacterial activity of antibacterial finished products

TC 42 Photography

ISO/CD 22028-2 Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB)

TC 44 Welding and allied processes

ISO/CD 669 Resistance welding — Resistance welding equipment — Mechanical and electrical requirements

ISO/CD 5826 Resistance welding equipment — Transformers — General specifications applicable to all transformers

TC 86 Refrigeration and air-conditioning

ISO/WD 16345 Water-cooling towers — Testing and rating of thermal performance

TC 96 Cranes

ISO/CD 17440 Cranes — General Design — Limit states and proof of competence of forged hooks

TC 121 Anaesthetic and respiratory equipment

ISO/WD 16571 Medical gas systems - Systems for evacuation of plume generated by medical devices

TC 130 Graphic technology

ISO/CD 12647-4 Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 4: Publication gravure printing

TC 131 Fluid power systems

ISO/NP 7241-1 Hydraulic fluid power — Quick-action couplings — Part 1: Dimensions and requirements

TC 156 Corrosion of metals and alloys

ISO 8044:1999/CD Amd 1

Corrosion of metals and alloys — Basic terms and definitions — Amendment 1

TC 157 Non-systemic contraceptives and STI barrier prophylactics

ISO/CD 4074 Natural latex rubber condoms — Requirements and test methods

TC 159 Ergonomics

ISO/CD 9241-391 Ergonomics of Human System Interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures

TC 163 Thermal performance and energy use in the built environment

ISO/NP 15758 Hygrothermal performance of building equipment and industrial installations — Calculation of water vapour diffusion — Cold pipe insulation systems

TC 168 Prosthetics and orthotics

ISO/CD 16955 Quantification of physical parameters of ankle foot devices and foot units

TC 173 Assistive products for persons with disability

ISO/NP 7176-22 Wheelchairs — Part 22: Set-up procedures

TC 198 Sterilization of health care products

ISO 15883-1:2006/CD Amd 1

Washer-disinfectors — Part 1: General requirements, terms and definitions and tests — Amendment 1

TC 201 Surface chemical analysis

ISO/CD 13083 Definition and calibration of the spatial resolution of electrical scanning-probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes

TC 217 Cosmetics

ISO/NP TR 14735 Cosmetics - Minimising and determining nitrosamines in cosmetics

JTC 1 Information technology

ISO/IEC NP 14165-243

Information technology — Fibre Channel — Part 243: Backbone-3 (FC-BB-3)

ISO/IEC 14496-16/PDAM 2

Information technology — Coding of audio-visual objects — Part 16: Animation Framework eXtension (AFX) — Amendment 2: Multi-resolution 3D mesh compression

ISO/IEC 15444-1:2004/PDAM 6

Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment 6: Updated ICC profile support and resolution clarification

ISO/IEC CD 23000-10

Information technology — Multimedia application format (MPEG-A) — Part 10: Video surveillance application format

ISO/IEC CD 23005-1

Information technology — Media context and control — Part 1: Architecture

ISO/IEC CD 23005-2

Information technology — Media context and control — Part 2: Control information

ISO/IEC CD 23005-3

Information technology — Media context and control — Part 3: Sensory information

ISO/IEC CD 23005-4

Information technology — Media context and control — Part 4: Virtual world object characteristics

ISO/IEC CD 23005-5

Information technology — Media context and control — Part 5: Data formats for interaction devices

ISO/IEC CD 23005-6

Information technology — Media context and control — Part 6: Common types and tools

ISO/IEC 19794-14/PDAM 1

Information technology — Biometric data interchange formats — Part 14: DNA data — Amendment 1: Conformance Testing Methodology

DIS circulated


These documents have obtained substantial support within the appropriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

IIW International Institute of Welding

ISO/DIS 14346 * Welding — Static design procedure for hollow section joints 2012-01-23


ISO/DIS 16548 Ships and marine technology — Ship design — General guidance on emergency towing procedure

2012-01-24

TC 17 Steel

ISO/DIS 13270 * Steel fibres for concrete — Definitions and specifications 2012-01-18

TC 22 Road vehicles

ISO/DIS 6550-3 * Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 3: M10 glow-plugs

2012-01-17

(Revision of ISO 6550-3:2009)

ISO/DIS 16750-3 * Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads

2012-01-13


TC 23 Tractors and machinery for agriculture and forestry

ISO/DIS 4254-1 * Agricultural machinery — Safety — Part 1: General requirements 2012-01-05


TC 29 Small tools

ISO/DIS 513 * Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application

2012-01-16

(Revision of ISO 513:2004)

TC 35 Paints and varnishes

ISO/DIS 1524 Paints, varnishes and printing inks — Determination of fineness of grind 2012-01-05


TC 42 Photography

ISO/DIS 12234-1 Electronic still-picture imaging — Removable memory — Part 1: Basic removable-memory model

2012-01-10



ISO/DIS 16338 * Welding for aerospace applications — Resistance spot and seam welding 2012-01-23

TC 48 Laboratory equipment

ISO/DIS 6556 * Laboratory glassware — Filter flasks 2012-01-26


TC 58 Gas cylinders

ISO/DIS 19078 * Gas cylinders — Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles

2012-01-03


TC 61 Plastics

ISO/DIS 11963 * Plastics — Polycarbonate sheets — Types, dimensions and characteristics 2012-01-12


ISO/DIS 13106 * Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffs 2012-01-20

ISO/DIS 13636 * Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets

2012-01-12

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO/DIS 8300 * Nuclear fuel technology — Determination of plutonium content in plutonium dioxide of nuclear grade quality — Gravimetric method

2012-01-23


ISO/DIS 8425 * Nuclear fuel technology — Determination of plutonium in pure plutonium nitrate solutions — Gravimetric method

2012-01-23


TC 92 Fire safety

ISO/DIS 12468-1 * External exposure of roofs to fire — Part 1: Test method 2012-01-17(Revision of ISO 12468-1:2003)

TC 94 Personal safety -- Protective clothing and equipment

ISO 16602:2007/DAmd 1

* Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Amendment 1

2012-01-27

ISO/DIS 16900-1.3 Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of inward leakage

2011-10-27

ISO/DIS 16900-11 * Respiratory protective devices — Methods of test and test equipment — Part 11: Determination of field of vision

2012-01-27

TC 96 Cranes

ISO/DIS 16625 * Cranes and hoists — Selection of wire ropes, drums and sheaves 2012-01-24(Revision of ISO 4308-2:1988, ISO 8087:1985, ISO 4308-1:2003)

ISO/DIS 15442 Cranes — Safety requirements for loader cranes 2012-01-16


TC 104 Freight containers

ISO/DIS 1496-1 * Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes

2012-01-18

(Revision of ISO 1496-1:1990, ISO 1496-1:1990/Amd 2:1998, ISO 1496-1:1990/Amd 1:1993, ISO 1496-1:1990/Amd 3:2005, ISO 1496-1:1990/Amd 4:2006, ISO 1496-1:1990/Amd 5:2006)

TC 112 Vacuum technology

ISO/DIS 14291 * Vacuum gauges — Definitions and specifications for quadrupole mass spectrometers 2012-01-12

TC 113 Hydrometry

ISO/DIS 4359 Liquid flow measurement in open channels — Rectangular, trapezoidal and U-shaped flumes

2012-01-18

(Revision of ISO 4359:1983, ISO 4359:1983/Cor 1:1999)

TC 120 Leather

ISO 5431:1999/DAmd 1

Leather — Wet blue goat skins — Specification — Amendment 1 2012-01-16

ISO 5432:1999/DAmd 1

Leather — Wet blue sheep skins — Specification — Amendment 1 2012-01-16

ISO 5433:1999/DAmd 1

Leather — Bovine wet blue — Specification — Amendment 1 2012-01-16

TC 122 Packaging

ISO/DIS 18601 * Packaging and the environment — General requirements for the use of ISO standards in the field of packaging and the environment

2012-01-03

ISO/DIS 18602 * Packaging and the environment — Optimization of the packaging system 2012-01-03

ISO/DIS 18603 * Packaging and the environment — Reuse 2012-01-03

ISO/DIS 18604 * Packaging and the environment — Material recycling 2012-01-03

ISO/DIS 18605 * Packaging and the environment — Energy recovery 2012-01-03

ISO/DIS 18606 * Packaging and the environment — Organic recycling 2012-01-03

TC 123 Plain bearings

ISO/DIS 13939 Foil bearings — Guidelines for testing of the performance of foil journal bearings --Testing of load capacity, friction coefficient and lifetime

2012-01-24


ISO/DIS 15339-1 * Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles and characterized reference printing conditions

2012-01-05


ISO/DIS 14540 * Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)

2012-01-05

ISO/DIS 14541 * Hydraulic fluid power — Dimensions and requirements for screw-to-connect type quick-action couplings for general purpose

2012-01-05

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/DIS 16422 * Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications

2012-01-12


ISO/DIS 17484-1 Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems

2012-01-24

(Revision of ISO 17484-1:2006, ISO 17484-1:2006/Cor 1:2008)

TC 156 Corrosion of metals and alloys

ISO/DIS 7539-11 Corrosion of metals and alloys — Stress corrosion cracking — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking

2012-01-26

ISO/DIS 21601 Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service

2012-01-26

TC 172 Optics and photonics

ISO/DIS 10685-2 * Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 2: Commercial information

2012-01-05

ISO/DIS 10685-3 * Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 3: Technical information

2012-01-05

ISO/DIS 11979-1 * Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary 2012-01-12(Revision of ISO 11979-1:2006)

ISO/DIS 11979-3 * Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods

2012-01-12


ISO 11979- * Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information — 2012-01-12

4:2008/DAmd 1 Amendment 1

TC 194 Biological evaluation of medical devices

ISO/DIS 10993-3 * Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity

2012-01-05


TC 199 Safety of machinery

ISO/DIS 13856-1 * Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors

2012-01-26


TC 206 Fine ceramics

ISO/DIS 13383-1 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural characterization — Part 1: Determination of grain size and size distribution

2012-01-19

ISO/DIS 13383-2 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural characterization — Part 2: Determination of phase volume fraction by evaluation of micrographs

2012-01-19

TC 213 Dimensional and geometrical product specifications and verification

ISO/DIS 1938-1 * Geometrical product specifications (GPS) - Dimensional measuring equipment — Part 1: Plain limit gauges of linear size

2012-01-19

(Revision of ISO/R 1938:1971)

ISO/DIS 25178-70 * Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Physical measurement standards

2012-01-19

ISO/DIS 25178-603.2

* Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments

2011-10-26


ISO/IEC DIS 17568 Information technology — Telecommunications and information exchange between systems — Close proximity electric induction wireless communications

2012-01-09

ISO/IEC DIS 17569 Information technology — Telecommunications and information exchange between systems — Procedure for the registration of assigned numbers for ISO/IEC 17568

2012-01-09

ISO/IEC 10918-4:1999/DAmd 1

Information technology — Digital compression and coding of continuous-tone still images: Registration of JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers, SPIFF compression types and Registration Authorities (REGAUT) — Part 4: — Amendment 1: Application specific marker list

2012-01-31

ISO/IEC DIS 10918-6

Information technology — Digital compression and coding of continuous-tone still images: Application to printing systems — Part 6:

2012-01-20

ISO/IEC 13818-1:2007/DAmd 7

Information technology — Generic coding of moving pictures and associated audio information: Systems — Part 1: — Amendment 7: Signalling of stereoscopic video in MPEG-2 systems

2012-01-17

ISO/IEC 14496-3:2009/DAmd 3

Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 3: Transport of unified speech and audio coding (USAC)

2012-01-31

ISO/IEC 14496-5:2001/DAmd 31

Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 31: Reference software for efficient representation of 3D meshes with multiple attributes

2012-01-20

ISO/IEC 14496-22:2009/DAmd 2

Information technology — Coding of audio-visual objects — Part 22: Open Font Format — Amendment 2: Additional script and language tags

2012-01-31

ISO/IEC 14496-27:2009/DAmd 4

Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amendment 4: Conformance for efficient representation of 3D meshes with multiple attributes

2012-01-20

ISO/IEC DIS 14496-28

Information technology — Coding of audio-visual objects — Part 28: Composite font representation

2012-01-20

ISO/IEC 15444-2:2004/DAmd 4

Information technology — JPEG 2000 image coding system: Extensions — Part 2: — Amendment 4: Block coder extension

2012-01-31

ISO/IEC 23000-12:2010/DAmd 2

Information technology — Multimedia application format (MPEG-A) — Part 12: Interactive music application format — Amendment 2: Compact representation of dynamic volume change and audio equalization

2012-01-20

ISO/IEC 23003-2:2010/DAmd 1

Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 1: SAOC conformance

2012-01-31

ISO/IEC 23003-2:2010/DAmd 2

Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 2: SAOC reference software

2012-01-31

ISO/IEC DIS 23006-1

Information technology — Multimedia service platform technologies — Part 1: Architecture

2012-01-23

(Revision of ISO/IEC CD 23006, ISO/IEC 23006-1:2011)

ISO/IEC DIS 23007-2

Information technology — Rich media user interfaces — Part 2: Advanced user interaction (AUI) interfaces

2012-01-20

ISO/IEC DIS 29174-2

Information technology — UII scheme and encoding format for Mobile AIDC services — Part 2: Registration procedures

2012-01-30

(Revision of ISO/IEC CD 29174)

ISO/IEC DIS 2382-37

Information technology — Vocabulary — Part 37: Harmonized biometric vocabulary 2012-01-09

ISO/IEC DIS 19794-11.2

Information technology — Biometric data interchange formats — Part 11: Signature/sign processed dynamic data

2012-01-31

ISO/IEC DIS 29109-5

Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 5: Face image data

2012-01-09

(Revision of ISO/IEC 29109-5:2011)

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

TC 2 Fasteners

ISO/FDIS 4753 * Fasteners — Ends of parts with external ISO metric thread 2011-10-05


TC 6 Paper, board and pulps

ISO/FDIS 2493-2 * Paper and board — Determination of resistance to bending — Part 2: Taber-type tester

2011-10-26



ISO/FDIS 15779 * Condensed aerosol fire extinguishing systems — Requirements and test methods for components and system design, installation and maintenance — General requirements

2011-10-13


ISO/FDIS 11783-4 * Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 4: Network layer

2011-10-12


TC 34 Food products

ISO/FDIS 14470 * Food irradiation — Requirements for the development, validation and routine control of the ionizing radiation used for the treatment of food

2011-10-23

ISO/FDIS 7970 * Wheat (Triticum aestivum L.) — Specification 2011-10-13(Revision of ISO 7970:2000)

ISO/FDIS 3972 * Sensory analysis — Methodology — Method of investigating sensitivity of taste 2011-10-04(Revision of ISO 3972:1991)


ISO/FDIS 2431 * Paints and varnishes — Determination of flow time by use of flow cups 2011-10-26(Revision of ISO 2431:1993, ISO 2431:1993/Cor 1:1994, ISO 2431:1993/Cor 2:1999)

ISO/FDIS 7783 * Paints and varnishes — Determination of water-vapour transmission properties — Cup method

2011-10-19

(Revision of ISO 7783-1:1996, ISO 7783-2:1999, ISO 7783-1:1996/Cor 1:1998)

TC 38 Textiles

ISO/FDIS 2959 * Textiles — Woven fabric descriptions 2011-10-12(Revision of ISO 2959:1973)

TC 41 Pulleys and belts (including veebelts)

ISO/FDIS 254 * Belt drives — Pulleys — Quality, finish and balance 2011-10-27(Revision of ISO 254:1998)

TC 45 Rubber and rubber products

ISO/FDIS 34-2 * Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces

2011-10-23


ISO/FDIS 1827 * Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods

2011-10-27


ISO/FDIS 2921 * Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)

2011-10-04


ISO/FDIS 7267-3 * Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method

2011-10-25


ISO/FDIS 13226 * Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers

2011-10-13


ISO/FDIS 124 * Latex, rubber — Determination of total solids content 2011-11-01(Revision of ISO 124:2008)

ISO/FDIS 2475 * Chloroprene rubber (CR) — General-purpose types — Evaluation procedure 2011-10-13(Revision of ISO 2475:1999, ISO 2475:1999/Cor 1:2001, ISO 2475:1999/Amd 1:2005)

ISO/FDIS 8511 * Rubber compounding ingredients — Carbon black — Determination of pellet size distribution

2011-10-06


ISO/FDIS 11852 * Rubber — Determination of magnesium content of field and concentrated natural rubber latex by titration

2011-10-16

TC 46 Information and documentation

ISO/FDIS 30300 * Information and documentation — Management systems for records — Fundamentals and vocabulary

2011-10-16

ISO/FDIS 30301 * Information and documentation — Management systems for records — Requirements 2011-10-16

TC 59 Buildings and civil engineering works

ISO/FDIS 21929-1 * Sustainability in building construction — Sustainability indicators — Part 1: Framework for the development of indicators and a core set of indicators for buildings

2011-10-24

(Revision of ISO/TS 21929-1:2006)

TC 61 Plastics

ISO/FDIS 1043-1 * Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics

2011-10-12

(Revision of ISO 1043-1:2001, ISO 1043-1:2001/DAmd 1.2)

ISO/FDIS 1043-2 * Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials 2011-10-12(Revision of ISO 1043-2:2000)

ISO/FDIS 23559 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films 2011-10-30


TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO 21809-3:2008/FDAmd 1

* Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1

2011-10-27

ISO/FDIS 13503-1 * Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement of viscous properties of completion fluids

2011-10-12

(Revision of ISO 13503-1:2003, ISO 13503-1:2003/Cor 1:2005)

ISO/FDIS 13706 * Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers 2011-10-26



ISO/FDIS 17874-3 * Remote handling devices for radioactive materials — Part 3: Electrical master-slave manipulators

2011-10-13

TC 92 Fire safety

ISO 5658-2:2006/FDAmd 1

* Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration — Amendment 1

2011-10-17

TC 118 Compressors and pneumatic tools, machines and equipment

ISO/FDIS 11148-1 * Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for non-threaded mechanical fasteners

2011-10-12

ISO/FDIS 11148-2 * Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and crimping power tools

2011-10-12

ISO/FDIS 11148-5 * Hand-held non-electric power tools — Safety requirements — Part 5: Rotary percussive drills

2011-10-12

ISO/FDIS 11148-8 * Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and polishers

2011-10-12

ISO/FDIS 11148-9 * Hand-held non-electric power tools — Safety requirements — Part 9: Die grinders 2011-10-12

ISO/FDIS 11148-10 * Hand-held non-electric power tools — Safety requirements — Part 10: Compression power tools

2011-10-12

ISO/FDIS 11148-11 * Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and shears

2011-10-12


ISO/FDIS 8835-7 * Inhalational anaesthesia systems — Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases

2011-10-18


ISO/FDIS 15524 * Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm

2011-10-19

ISO/FDIS 4397 * Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes

2011-10-04


ISO/FDIS 16873 * Hydraulic fluid power — Pressure switches — Mounting surfaces 2011-10-17(Revision of ISO 16873:2002, ISO 16873:2002/Amd 1:2005)


ISO/FDIS 11296-7 * Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes

2011-10-03

ISO/FDIS 19892 * Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling

2011-10-17

TC 147 Water quality

ISO/FDIS 13162 * Water quality — Determination of carbon 14 activity — Liquid scintillation counting method

2011-10-06

TC 197 Hydrogen technologies

ISO/FDIS 22734-2 * Hydrogen generators using water electrolysis process — Part 2: Residential applications

2011-10-27

(Revision of ISO/CD 22734)

TC 202 Microbeam analysis

ISO/FDIS 13067 * Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size

2011-10-20

TC 215 Health informatics

ISO/HL7 FDIS 27953-1

* Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance — Part 1: Framework for adverse event reporting

2011-10-12

ISO/HL7 FDIS 27953-2

* Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance — Part 2: Human pharmaceutical reporting requirements for ICSR

2011-10-12

TC 223 Societal security

ISO/FDIS 22320 * Societal security — Emergency management — Requirements for command and control

2011-10-23


ISO/IEC FDIS 14908-1

* Interconnection of information technology equipment — Control network protocol — Part 1: Protocol stack

2011-10-02


* Interconnection of information technology equipment — Control network protocol — Part 2: Twisted pair communication

2011-10-02


* Interconnection of information technology equipment — Control network protocol — Part 3: Power line channel specification

2011-10-02


* Interconnection of information technology equipment — Control network protocol — Part 4: IP communication

2011-10-02

ISO/IEC FDIS 16504 * Information technology — Telecommunications and information exchange between systems — MAC and PHY for operation in TV white space

2011-10-23


* Information technology — Small Computer System Interface (SCSI) — Part 372: SCSI Enclosure Services - 2 (SES-2)

2011-10-03

ISO/IEC FDIS 9797-3 * Information technology — Security techniques — Message Authentication Codes (MACs) — Part 3: Mechanisms using a universal hash-function

2011-10-04


* Information technology — Security techniques — Key management — Part 5: Group key management

2011-10-24

ISO/IEC FDIS 18031 * Information technology — Security techniques — Random bit generation 2011-10-06(Revision of ISO/IEC 18031:2005, ISO/IEC 18031:2005/Cor 1:2009)

ISO/IEC FDIS 27007 * Information technology — Security techniques — Guidelines for information security management systems auditing

2011-10-04

ISO/IEC FDIS 29128 * Information technology — Security techniques — Verification of cryptographic protocols

2011-10-17


* Information technology — Security techniques — Lightweight cryptography — Part 2: Block ciphers

2011-10-27


* Information technology — Media context and control — Part 7: Conformance and reference software

2011-10-04

ISO/IEC FDIS 15415 * Information technology — Automatic identification and data capture techniques — Bar code symbol print quality test specification — Two-dimensional symbols

2011-10-17

(Revision of ISO/IEC 15415:2004, ISO/IEC 15415:2004/Cor 1:2008)


* Information technology — Learning, education, and training — Content packaging — Part 2: XML binding

2011-10-24

Standards published

New International Standards published between 01 August and 31 August 2011


** French version of standard previously published in English only

Price group

IIW International Institute of Welding

ISO 14271:2011 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds

D

TC 2 Fasteners

ISO 1580:2011 Slotted pan head screws — Product grade A C

ISO 2009:2011 Slotted countersunk flat head screws — Product grade A C

ISO 2010:2011 Slotted raised countersunk head screws — Product grade A C

ISO 4766:2011 Slotted set screws with flat point C

ISO 7045:2011 Pan head screws with type H or type Z cross recess — Product grade A C

ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8

C

ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws

C

ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess — Product grade A

C

TC 4 Rolling bearings

ISO 12090-1:2011

Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 1: Boundary dimensions and tolerances for series 1, 2 and 3

H

ISO 12090-2:2011

Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 2: Boundary dimensions and tolerances for series 4 and 5

E


ISO 776:2011 Pulps — Determination of acid-insoluble ash C

ISO 15320:2011 Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract E

ISO 3781:2011 Paper and board — Determination of tensile strength after immersion in water C


ISO 21070:2011 * Ships and marine technology — Marine environment protection — Management and handling of shipboard garbage

J

ISO 13122:2011 * Ships and marine technology — Launching appliances for davit-launched liferafts E

ISO 14409:2011 Ships and marine technology — Ship launching air bags F


ISO 29845:2011 * Technical product documentation — Document types U


ISO 10795:2011 * Space systems — Programme management and quality — Vocabulary R

ISO 14620-2:2011

* Space systems — Safety requirements — Part 2: Launch site operations H


ISO 7203-3:2011 * Fire extinguishing media — Foam concentrates — Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids

R

TC 22 Road vehicles

ISO 12405-1:2011

* Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems — Part 1: High-power applications

U


ISO 12809:2011 Crop protection equipment — Reciprocating positive displacement pumps and centrifugal pumps — Test methods

F

ISO 8224-1:2003/Amd 1:2011

Traveller irrigation machines — Part 1: Operational characteristics and laboratory and field test methods — Amendment 1

XZ

ISO 24631-6:2011

Radiofrequency identification of animals — Part 6: Representation of animal identification information (visual display/data transfer)

C

TC 28 Petroleum products and lubricants

ISO 3405:2011 Petroleum products — Determination of distillation characteristics at atmospheric pressure R

ISO 18132-1:2011

* Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 1: Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage

L

ISO 18132-3:2011

* Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 3: Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage

M

TC 29 Small tools

ISO 2238:2011 Machine bridge reamers C

ISO 6261:2011 Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation F

TC 31 Tyres, rims and valves

ISO 4223-1:2002/Amd 1:2011

Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres — Amendment 1

XZ

ISO 15222:2011 Truck and bus tyres — Method for measuring relative wet grip performance — Loaded new tyres

K

TC 34 Food products

ISO 3632-1:2011 * Spices — Saffron (Crocus sativus L.) — Part 1: Specification D

ISO 16140:2003/Amd 1:2011

Microbiology of food and animal feeding stuffs — Protocol for the validation of alternative methods — Amendment 1

XZ

ISO 6493:2000 Animal feeding stuffs — Determination of starch content — Polarimetric method E


ISO 4628-6:2011 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of

C

degree of chalking by tape method

ISO 6272-1:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter

D

ISO 6272-2:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter

C

TC 37 Terminology and other language and content resources

ISO 24614-2:2011

* Language resource management — Word segmentation of written texts — Part 2: Word segmentation for Chinese, Japanese and Korean

S

TC 38 Textiles

ISO 14184-1:2011

Textiles — Determination of formaldehyde — Part 1: Free and hydrolysed formaldehyde (water extraction method)

D

ISO 14184-2:2011

Textiles — Determination of formaldehyde — Part 2: Released formaldehyde (vapour absorption method)

F

ISO/TR 24697:2011

* Textiles and textile products — Guidelines on the determination of the precision of a standard test method by interlaboratory trials

H

TC 42 Photography

ISO 3665:2011 * Photography — Intra-oral dental radiographic film and film packets — Manufacturer specifications

E


ISO 10863:2011 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)

P


ISO 4671:2007/Amd 1:2011

Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies — Amendment 1: Clarification of position at which outside diameter is measured

XZ

ISO 6801:1983/Amd 1:2011

Rubber or plastics hoses — Determination of volumetric expansion — Amendment 1: Deletion of alcohol as pressurizing fluid

XZ

ISO 1853:2011 * Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity

E

ISO 5600:2011 * Rubber — Determination of adhesion to rigid materials using conical shaped parts D

ISO 5603:2011 * Rubber, vulcanized — Determination of adhesion to wire cord H

ISO 2303:2011 Isoprene rubber (IR) — Non-oil-extended, solution-polymerized types — Evaluation procedures

G

ISO 5794-3:2011 * Rubber compounding ingredients — Silica, precipitated, hydrated — Part 3: Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)

D


ISO 15511:2011 Information and documentation — International standard identifier for libraries and related organizations (ISIL)

D

ISO 25964-1:2011

* Information and documentation — Thesauri and interoperability with other vocabularies — Part 1: Thesauri for information retrieval

XC

ISO/TR 23081-3:2011

* Information and documentation — Managing metadata for records — Part 3: Self-assessment method

D

TC 51 Pallets for unit load method of materials handling

ISO 13194:2011 * Box pallets — Principal requirements and test methods L

TC 61 Plastics

ISO 25762:2009 Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites

N

ISO 11357-3:2011

Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization

C

ISO 11357-6:2008

Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

F

ISO 10640:2011 Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy

N

ISO 4901:2011 * Reinforced plastics based on unsaturated-polyester resins — Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography

E

ISO 3598:2011 Textile glass — Yarns — Basis for a specification B

TC 69 Applications of statistical methods

ISO 3951-4:2011 * Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels

M

ISO 13053-1:2011

Quantitative methods in process improvement — Six Sigma — Part 1: DMAIC methodology P

ISO 13053-2:2011

Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques T

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/TR 16475:2011

Guidelines for the repair of water-leakage cracks in concrete structures H

TC 79 Light metals and their alloys

ISO 7599:2010 Anodizing of aluminium and its alloys — General specifications for anodic oxidation coatings on aluminium

L

ISO 11707:2011 * Magnesium and its alloys — Determination of lead and cadmium D

ISO 6361-1:2011 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery

E

ISO 6361-2:2011 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties

U

ISO 6361-3:2011 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions

B

ISO 6361-4:2011 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions

F

ISO 6361-5:2011 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition

C

TC 83 Sports and recreational equipment

ISO 7795:2011 Cross-country skis — Ski-binding screws — Test methods C

TC 92 Fire safety

ISO 12136:2011 * Reaction to fire tests — Measurement of material properties using a fire propagation apparatus

T

ISO 19706:2011 Guidelines for assessing the fire threat to people F

TC 94 Personal safety -- Protective clothing and equipment

ISO 27065:2011 Protective clothing — Performance requirements for protective clothing worn by operators applying liquid pesticides

J

ISO 16900-4:2011

* Respiratory protective devices — Methods of test and test equipment — Part 4: Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing

H

ISO/TS 16976-3:2011

* Respiratory protective devices — Human factors — Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment

L

TC 106 Dentistry

ISO 24234:2004/Amd 1:2011

Dentistry — Mercury and alloys for dental amalgam — Amendment 1: Requirements for marking and manufacturer's instructions concerning mercury

XZ

ISO 1797-1:2011 Dentistry — Shanks for rotary instruments — Part 1: Shanks made of metals E

ISO 7711-2:2011 Dentistry — Rotary diamond instruments — Part 2: Discs F

ISO 7494-1:2011 Dentistry — Dental units — Part 1: General requirements and test methods D

TC 108 Mechanical vibration, shock and condition monitoring

ISO 16063-41:2011

* Methods for the calibration of vibration and shock transducers — Part 41: Calibration of laser vibrometers

S


ISO 27893:2011 * Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge

H


ISO 80601-2-13:2011

* Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation

X


ISO 15930-8:2010/Cor 1:2011

* Graphic technology — Prepress digital data exchange using PDF — Part 8: Partial exchange of printing data using PDF 1.6 (PDF/X-5) — Technical Corrigendum 1

free


ISO 9311-2:2011 Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength D

ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content

B

TC 142 Cleaning equipment for air and other gases

ISO 29464:2011 * Cleaning equipment for air and other gases — Terminology M

TC 146 Air quality

ISO 25139:2011 Stationary source emissions — Manual method for the determination of the methane concentration using gas chromatography

J

TC 147 Water quality

ISO 18857-2:2009

Water quality — Determination of selected alkylphenols — Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation

J

TC 150 Implants for surgery

ISO 5834-2:2011 * Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 2: Moulded forms C

TC 155 Nickel and nickel alloys

ISO 22033:2011 Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric method

F

TC 159 Ergonomics

ISO 26800:2011 Ergonomics — General approach, principles and concepts J

TC 160 Glass in building

ISO 12543-1:2011

Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts

D

ISO 12543-2:2011

Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass

C

ISO 12543-3:2011

Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass C

ISO 12543-4:2011

Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability

F

ISO 12543-5:2011

Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing

E

ISO 12543-6:2011

Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance C

TC 164 Mechanical testing of metals

ISO 12111:2011 * Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method

M

TC 172 Optics and photonics

ISO 9344:2011 * Microscopes — Graticules for eyepieces B

ISO 10943:2011 Ophthalmic instruments — Indirect ophthalmoscopes B

ISO/TR 21254-4:2011

* Lasers and laser-related equipment — Test methods for laser-induced damage threshold — Part 4: Inspection, detection and measurement

K

TC 173 Assistive products for persons with disability

ISO 24415-2:2011

* Tips for assistive products for walking — Requirements and test methods — Part 2: Durability of tips for crutches

C

TC 201 Surface chemical analysis

ISO/TR 14187:2011

* Surface chemical analysis — Characterization of nanostructured materials R

ISO 14701:2011 * Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness

H


ISO 28703:2011 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal-shock resistance of porous ceramics

C

ISO 28704:2011 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for cyclic bending fatigue of porous ceramics at room temperature

D

TC 211 Geographic information/Geomatics

ISO 19110:2005 Geographic information — Methodology for feature cataloguing U


ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems

X

TC 215 Health informatics

ISO/HL7 10781:2009

Electronic Health Record-System Functional Model, Release 1.1 XD

TC 219 Floor coverings

ISO 10581:2011 * Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specification D

ISO 24343-2:2011

* Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2: Short-term residual indentation of resilient floor covering

B

ISO 24343-3:2011

* Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3: Indentation of resilient semi-flexible/vinyl composition tiles

B

TC 229 Nanotechnologies

ISO/TS 10868:2011

* Nanotechnologies — Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy

K

TC 234 Fisheries and aquaculture

ISO 12877:2011 * Traceability of finfish products — Specification on the information to be recorded in farmed finfish distribution chains

S

TMB Technical Management Board

IWA 9:2011 Framework for managing sustainable development in business districts N


ISO/IEC 40210:2011

* Information technology — W3C SOAP Version 1.2 Part 1: Messaging Framework (Second Edition)

A

ISO/IEC 40220:2011

* Information technology — W3C SOAP Version 1.2 Part 2: Adjuncts (Second Edition) A

ISO/IEC 40230:2011

* Information technology — W3C SOAP Message Transmission Optimization Mechanism A

ISO/IEC 40240:2011

* Information technology — W3C Web Services Addressing 1.0 — Core A

ISO/IEC 40250:2011

* Information technology — W3C Web Services Addressing 1.0 — SOAP Binding A

ISO/IEC 40260:2011

* Information technology — W3C Web Services Addressing 1.0 — Metadata A

ISO/IEC 40270:2011

* Information technology — W3C Web Services Policy 1.5 — Framework A

ISO/IEC 40280:2011

* Information technology — W3C Web Services Policy 1.5 — Attachment A

ISO/IEC 14651:2011

Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering

S

ISO/IEC 18052:2011

* Information technology — Telecommunications and information exchange between systems — Protocol for Computer Supported Telecommunications Applications (CSTA) Phase III

XK

ISO/IEC 14143-2:2011

* Information technology — Software measurement — Functional size measurement — Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1

N

ISO/IEC TR 24748-2:2011

* Systems and software engineering — Life cycle management — Part 2: Guide to the application of ISO/IEC 15288 (System life cycle processes)

W

ISO/IEC TR 24748-3:2011

* Systems and software engineering — Life cycle management — Part 3: Guide to the application of ISO/IEC 12207 (Software life cycle processes)

XA

ISO/IEC TR 29110-1:2011

* Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1: Overview G

ISO/IEC TR 29110-3:2011

* Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3: Assessment guide

C

ISO/IEC 29341-14-3:2011

* Information technology — UPnP Device Architecture — Part 14-3: Audio Video Device Control Protocol — Level 3 — Media Server Device

K

ISO/IEC 29341-16-1:2011

* Information technology — UPnP Device Architecture — Part 16-1: Low Power Device Control Protocol — Low Power Architecture

Q

ISO/IEC 29341-17-1:2011

* Information technology — UPnP Device Architecture — Part 17-1: Quality of Service Device Control Protocol — Level 3 — Quality of Service Architecture

R

ISO/IEC 29341-18-1:2011

* Information technology — UPnP Device Architecture — Part 18-1: Remote Access Device Control Protocol — Remote Access Architecture

K

ISO/IEC 29341-18-2:2011

* Information technology — UPnP Device Architecture — Part 18-2: Remote Access Device Control Protocol — Remote Access Client Device

C

ISO/IEC 29341-18-3:2011

* Information technology — UPnP Device Architecture — Part 18-3: Remote Access Device Control Protocol — Remote Access Server Device

C

ISO/IEC 29341-18-4:2011

* Information technology — UPnP Device Architecture — Part 18-4: Remote Access Device Control Protocol — Remote Access Discovery Agent Device

C

ISO/IEC 29341-19-1:2011

* Information technology — UPnP Device Architecture — Part 19-1: Solar Protection Blind Device Control Protocol — Solar Protection Blind Device

B

ISO/IEC 29341-16-10:2011

* Information technology — UPnP Device Architecture — Part 16-10: Low Power Device Control Protocol — Low Power Proxy Service

F

ISO/IEC 29341-16-11:2011

* Information technology — UPnP Device Architecture — Part 16-11: Low Power Device Control Protocol — Low Power Service

G

ISO/IEC 29341-17-11:2011

* Information technology — UPnP Device Architecture — Part 17-11: Quality of Service Device Control Protocol — Level 3 — Quality of Service Manager Service

X

ISO/IEC 29341-17-12:2011

* Information technology — UPnP Device Architecture — Part 17-12: Quality of Service Device Control Protocol — Level 3 — Quality of Service Policy Holder Service

P

ISO/IEC 29341-17-13:2011

* Information technology — UPnP Device Architecture — Part 17-13: Quality of Service Device Control Protocol — Level 3 — Quality of Service Device Service — Underlying Technology Interfaces

H

ISO/IEC 29341-18-10:2011

* Information technology — UPnP Device Architecture — Part 18-10: Remote Access Device Control Protocol — Remote Access Inbound Connection Configuration Service

G

ISO/IEC 29341-18-11:2011

* Information technology — UPnP Device Architecture — Part 18-11: Remote Access Device Control Protocol — Remote Access Discovery Agent Service

F

ISO/IEC 29341-18-12:2011

* Information technology — UPnP Device Architecture — Part 18-12: Remote Access Device Control Protocol — Remote Access Discovery Agent Synchronization Service

K

ISO/IEC 29341-18-13:2011

* Information technology — UPnP Device Architecture — Part 18-13: Remote Access Device Control Protocol — Remote Access Transport Agent Configuration Service

S

ISO/IEC 27035:2011

* Information technology — Security techniques — Information security incident management W

ISO/IEC 24800-5:2011

* Information technology — JPSearch — Part 5: Data interchange format between image repositories

F

ISO/IEC 24753:2011

* Information technology — Radio frequency identification (RFID) for item management — Application protocol: encoding and processing rules for sensors and batteries

W

ISO/IEC 24754-1:2008/Cor 1:2011

* Information technology — Document description and processing languages — Minimum requirements for specifying document rendering systems — Part 1: Feature specifications for document rendering systems — Technical Corrigendum 1

free

ISO/IEC 29500-1:2011

* Information technology — Document description and processing languages — Office Open XML File Formats — Part 1: Fundamentals and Markup Language Reference

XL

ISO/IEC 29500-2:2011

* Information technology — Document description and processing languages — Office Open XML File Formats — Part 2: Open Packaging Conventions

XL

ISO/IEC 29500-3:2011

* Information technology — Document description and processing languages — Office Open XML File Formats — Part 3: Markup Compatibility and Extensibility

XL

ISO/IEC 29500-4:2011

* Information technology — Document description and processing languages — Office Open XML File Formats — Part 4: Transitional Migration Features

XL

Standards confirmed

The following International Standards are confimred for a five year period:


ISO 22891:2007


ISO 7725:1991 (reconfirmed)

TC 77 Products in fibre reinforced cement


TC 87 Cork


TC 110 Industrial trucks

ISO 22877:2004

ISO 22878:2004

ISO 22880:2004

ISO 22882:2004

ISO 22883:2004

ISO 22884:2004


ISO 1608-1:1993 (reconfirmed)




ISO/TS 3669-2:2007




ISO 17559:2003

TC 146 Air quality



ISO 4226:2007

TC 168 Prosthetics and orthotics




ISO 10328:2006

ISO 13404:2007

ISO 22523:2006

ISO 22675:2006

TC 171 Document management applications


TC 195 Building construction machinery and equipment

ISO 18650-1:2004

ISO 21573-1:2006

TC 222 Personal financial planning

ISO 22222:2005


ISO/IEC 7942-1:1994 (reconfirmed)





Standards withdrawn


TC 34 Food products

ISO/TS 3632-1:2003 (replaced by ISO 3632-1:2011)


ISO 2788:1986 (replaced by ISO 25964-1:2011)

ISO 5964:1985 (replaced by ISO 25964-1:2011)


ISO/TS 27893:2009 (replaced by ISO 27893:2011)


ISO 8835-2:2007 (replaced by ISO 80601-2-13:2011)




IEC 60601-2-13:2003 (replaced by ISO 80601-2-13:2011)


ISO 3649:1980 (replaced by ISO 29464:2011)


ISO/IEC TR 15271:1998

(replaced by ISO/IEC TR 24748-3:2011)

ISO/IEC TR 19760:2003

(replaced by ISO/IEC TR 24748-2:2011)

ISO/IEC TR 18044:2004

(replaced by ISO/IEC 27035:2011)

ISO/IEC 29500-1:2008/Amd 1:2010

(replaced by )

ISO/IEC 29500-4:2008/Amd 1:2010

(replaced by )

Meeting calendar

(update at 01 August 2011)

Meetings called for the month of July are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

September 2011

1-3 Kassel (Germany)

TC 180 Solar energy

2 Kassel (Germany)

TC 180/SC 4 Solar energy/Systems - Thermal performance, reliability and durability

7-9 Kobe (Japan) TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection

8 Paris (France) TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)

8-9 Edinburgh (United Kingdom)

TC 24/SC 4 Particle characterization including sieving/Particle characterization

10-17 Shanghai (China) JTC 1/SC 36 Information technology/Information technology for learning, education and training

12-14 Chicago (USA) TC 205 Building environment design

12-16 Vienna (Austria) TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and shock

12-16 Florianopolis (Brazil)

TC 150 Implants for surgery

12-16 London (United Kingdom)

TC 262 Project committee: Risk management

13 Florianopolis (Brazil)

TC 150/SC 1 Implants for surgery/Materials


TC 150/SC 7 Implants for surgery/Tissue-engineered medical products

13-14 Florianopolis (Brazil)

TC 150/SC 5 Implants for surgery/Osteosynthesis and spinal devices

13-15 Moscow (Russian Federation)

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

14 Geneva (Switzerland)

TC 154 Processes, data elements and documents in commerce, industry and administration

14 Brescia (Italy) TC 201/SC 9 Surface chemical analysis/Scanning probe microscopy

14-15 Helsinki (Finland) TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete

14-15 Chicago (USA) TC 163 Thermal performance and energy use in the built environment


TC 150/SC 2 Implants for surgery/Cardiovascular implants and extracorporeal systems


TC 150/SC 4 Implants for surgery/Bone and joint replacements


TC 150/SC 6 Implants for surgery/Active implants

15 Brescia (Italy) TC 201/SC 1 Surface chemical analysis/Terminology

15 Brescia (Italy) TC 201/SC 2 Surface chemical analysis/General procedures

15-17 Brescia (Italy) TC 201 Surface chemical analysis

16 Brescia (Italy) TC 201/SC 4 Surface chemical analysis/Depth profiling

16 Brescia (Italy) TC 201/SC 5 Surface chemical analysis/Auger electron spectroscopy

16 Brescia (Italy) TC 201/SC 7 Surface chemical analysis/X-ray photoelectron spectroscopy

16-22 Berlin (Germany) TC 130 Graphic technology

17 Brescia (Italy) TC 201/SC 3 Surface chemical analysis/Data management and treatment

17 Brescia (Italy) TC 201/SC 8 Surface chemical analysis/Glow discharge spectroscopy

18 Trento (Italy) TC 201/SC 6 Surface chemical analysis/Secondary ion mass spectrometry

18-24 Phoenix (USA) TC 106 Dentistry

19 Chicago (USA) TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems

19-20 Copenhagen (Denmark)

JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces

19-20 La Plaine St-Denis (France)

TC 164/SC 3 Mechanical testing of metals/Hardness testing

19-20 New Delhi (India) TMB Technical Management Board

19-21 San Francisco (USA)

TC 243 Project Committee: Consumer product safety


TC 246 Project committee: Anti-counterfeiting tools

19-22 Paris (France) * TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)

19-23 Seoul (Korea, Republic of)

JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)

19-23 Bali (Indonesia) TC 165 Timber structures

19-23 Adelaide (Australia)

TC 190 Soil quality

19-23 Adelaide (Australia)

TC 190/SC 2 Soil quality/Sampling

20 Chicago (USA) TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and fixed firefighting systems using foam and powder

20 Berlin (Germany) TC 29/SC 8 Small tools/Tools for pressing and moulding

20-22 Paris (France) * TC 164/SC 5 Mechanical testing of metals/Fatigue testing

20-23 Paris (France) TC 59/SC 8 Buildings and civil engineering works/Sealants

20-23 Gaithersburg (USA)

TC 172/SC 5 Optics and photonics/Microscopes and endoscopes

21 Chicago (USA) TC 21/SC 2 Equipment for fire protection and fire fighting/Manually transportable fire extinguishers

21 Paris (France) TC 164/SC 2 Mechanical testing of metals/Ductility testing

21 Adelaide (Australia)

TC 190/SC 1 Soil quality/Evaluation of criteria, terminology and codification

21-22 Chicago (USA) TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas

21-23 New Delhi (India) GA General Assembly

21-23 Amsterdam (Netherlands)

TC 225 Market, opinion and social research

22 Chicago (USA) TC 21/SC 11 Equipment for fire protection and fire fighting/Smoke and heat control systems and components

22 Singapore (Singapore)

TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works

22 La Plaine St- TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on

Denis (France) aluminium

22 La Plaine St-Denis (France)

TC 79/SC 6 Light metals and their alloys/Wrought aluminium and aluminium alloys


* TC 79/SC 9 Light metals and their alloys/Symbolization

22 Sao Paulo (Brazil)



TC 190/SC 4 Soil quality/Biological methods


TC 190/SC 7 Soil quality/Soil and site assessment

22 Beijing (China) TC 213 Dimensional and geometrical product specifications and verification

22-23 Las Vegas (USA) TC 159/SC 4 Ergonomics/Ergonomics of human-system interaction


TC 164/SC 1 Mechanical testing of metals/Uniaxial testing

22-23 San Francisco (USA)

TC 240 Project Committee: Product recall

23 Chicago (USA) TC 21 Equipment for fire protection and fire fighting


TC 79 Light metals and their alloys


TC 190/SC 3 Soil quality/Chemical methods and soil characteristics

24 New Delhi (India) COUNCIL Council


TC 254 Safety of amusement rides and amusement devices

26 Bangkok (Thailand)

TC 44/SC 9 Welding and allied processes/Health and safety

26-27 Geneva (Switzerland)

TAG 8 Building

26-30 Kharkov (Ukraine)

TC 218 Timber

27 Valencia (Spain) * IULTCS International Union of Leather Technologists and Chemists Societies

28 Kuala Lumpur (Malaysia)

TC 61/SC 4 Plastics/Burning behaviour



29 Gothenburg (Sweden)

TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability

29 Vienna (Austria) TC 146/SC 3 Air quality/Ambient atmospheres

29 Vienna (Austria) TC 146/SC 6 Air quality/Indoor air

29-30 Riverside (USA) TC 58/SC 2 Gas cylinders/Cylinder fittings

30 Busan (Korea, Republic of)

JTC 1/SC 34 Information technology/Document description and processing languages

3rd Quarter 2011

Sapporo (Japan)

**

TC 184/SC 1

Automation systems and integration/Physical device control

October 2011


TC 146/SC 2

Air quality/Workplace atmospheres

4-6 Dublin (Ireland)

TC 34/SC 17

Food products/Management systems for food safety

4-7 Sapporo (Japan)

TC 159/SC 5

Ergonomics/Ergonomics of the physical environment

5 Sydney (Australia)

TC 89/SC 1 Wood-based panels/Fibre boards


TC 89/SC 2 Wood-based panels/Particle boards

5-7 Songdo (Korea, Republic of)

JTC 1/SC 17 Information technology/Cards and personal identification

6 San Diego (USA)

* TC 79/SC 11

Light metals and their alloys/Titanium

6 San Antonio (USA)

* TC 92/SC 2 Fire safety/Fire containment


CASCO Committee on conformity assessment


TC 89 Wood-based panels

9 Beijing (China) TC 27/SC 1 Solid mineral fuels/Coal preparation: Terminology and performance

9-14 Beijing (China) * TC 27 Solid mineral fuels

9-14 Tampa, Florida (USA)

* TC 204 Intelligent transport systems

10 Beijing (China) TC 27/SC 5 Solid mineral fuels/Methods of analysis

10-11

Milan (Italy) TC 209 Cleanrooms and associated controlled environments

10-14

Berlin (Germany)

TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

10-14

Dublin (Ireland)

TC 94/SC 15

Personal safety -- Protective clothing and equipment/Respiratory protective devices

10-14

Bangkok (Thailand)

TC 157 Non-systemic contraceptives and STI barrier prophylactics

10-14

Berlin (Germany)

TC 160 Glass in building

10-14

Nanjing (China)

TC 193 Natural gas

10-14

Nanjing (China)

**

TC 193/SC 1

Natural gas/Analysis of natural gas

10-14

Washington, D.C (USA)

TC 251 Project committee: Asset management

11-12

Paris (France) TC 17/SC 20

Steel/General technical delivery conditions, sampling and mechanical testing methods

12-13

Bangalore (India)

TC 34/SC 15

Food products/Coffee

12-14

Okinawa (Japan)

TC 172/SC 3

Optics and photonics/Optical materials and components

13 Maryland (USA)

TC 22/SC 5 Road vehicles/Engine tests

13 Annapolis (USA)

TC 22/SC 7 Road vehicles/Injection equipment and filters for use on road vehicles

13 Annapolis (USA)

TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters

13 Vienna (Austria)

TC 146/SC 1

Air quality/Stationary source emissions

13 Berlin (Germany)

TC 160/SC 1

Glass in building/Product considerations

13 Tokyo (Japan) TC 173/SC 2

Assistive products for persons with disability/Classification and terminology

14 London (United Kingdom)

TC 25 Cast irons and pig irons

14 Berlin (Germany)

TC 160/SC 2

Glass in building/Use considerations

16-21

Suzhou (China) TC 184/SC 4

Automation systems and integration/Industrial data

17 Berlin (Germany)

TC 2/SC 7 Fasteners/Reference standards

19 Berlin (Germany)

TC 2/SC 12 Fasteners/Fasteners with metric internal thread

17-21

Yokohama (Japan)


17-21

Alexandria (USA)

* TC 210 Quality management and corresponding general aspects for medical devices

18 Berlin (Germany)

TC 2/SC 11 Fasteners/Fasteners with metric external thread

18 Teddington (United Kingdom)


18-19

Beijing (China) TC 111/SC 1

Round steel link chains, chain slings, components and accessories/Chains and chain slings

18-20

Seattle (USA) TC 20/SC 10

Aircraft and space vehicles/Aerospace fluid systems and components

18-20

Lisbon (Portugal)

TC 58/SC 3 Gas cylinders/Cylinder design

19 Berlin (Germany)

TC 2 Fasteners

20 Yokohama (Japan)

TC 45/SC 2 Rubber and rubber products/Testing and analysis

20 Ottawa (Canada)

TC 92/SC 3 Fire safety/Fire threat to people and environment

20 Beijing (China) TC 111 Round steel link chains, chain slings, components and accessories

20 Beijing (China) TC 111/SC 3

Round steel link chains, chain slings, components and accessories/Components and accessories

20-21

Berlin (Germany)

TC 2/SC 14 Fasteners/Surface coatings

21 Ottawa (Canada)

TC 92/SC 4 Fire safety/Fire safety engineering

21 Paris (France) TC 244 Industrial furnaces and associated processing equipment


TC 41/SC 3 Pulleys and belts (including veebelts)/Conveyor belts

24-25

Genoa (Italy) TC 44/SC 10

Welding and allied processes/Unification of requirements in the field of metal welding

24-25

Paris (France) TC 253 Project committee: Treated wastewater re-use for irrigation

24-28

Helsinki (Finland)


24-28

Amsterdam (Netherlands)


24-28

Ottawa (Canada)

TC 181 Safety of toys

24-29

Beijing (China) TC 176 Quality management and quality assurance

25 Osaka (Japan) TC 38/SC 23

Textiles/Fibres and yarns


TC 41/SC 1 Pulleys and belts (including veebelts)/Friction

25 Amsterdam (Netherlands)

TC 138/SC 1

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage)

25-26

Genoa (Italy) **

TC 44/SC 11

Welding and allied processes/Qualification requirements for welding and allied processes personnel

25-27

Beltsville, Maryland (USA)

TC 34/SC 16

Food products/Horizontal methods for molecular biomarker analysis

26 Osaka (Japan) TC 38/SC 24

Textiles/Conditioning atmospheres and physical tests for textile fabrics


TC 41/SC 4 Pulleys and belts (including veebelts)/Synchronous belt drives


TC 138/SC 2

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies


**

TC 138/SC 4

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels

26-28

Troy (USA) TC 22 Road vehicles

26-28

Nanjing (China)

* TC 70 Internal combustion engines

27 Osaka (Japan) TC 38 Textiles


* TC 41 Pulleys and belts (including veebelts)

27 Madrid (Spain) TC 87 Cork


TC 138/SC 3

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications


TC 138/SC 5

Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications


* TC 138/SC 6

Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications

27 Elda (Alicante) (Spain)

TC 216 Footwear

27-28

Genoa (Italy) TC 44 Welding and allied processes

27-28

Moscow (Russian Federation)

TC 178 Lifts, escalators and moving walks

28 Ottawa (Canada)

TC 59/SC 17

Buildings and civil engineering works/Sustainability in buildings and civil engineering works

31 Melbourne (Australia)

* JTC 1/SC 25 Information technology/Interconnection of information technology equipment

Oslo (Norway) **

TC 59/SC 14

Buildings and civil engineering works/Design life

London (United Kingdom)

**

TC 59/SC 15

Buildings and civil engineering works/Performance criteria for single family attached and detached dwellings

October-November 2011

21-4 Brussels (Belgium)

TC 92/SC 1 Fire safety/Fire initiation and growth


TC 46/SC 11

Information and documentation/Archives/records management

31-3 Bangkok (Thailand)

TC 238 Solid biofuels

31-4 Washington, D.C (USA)

TC 242 Energy Management

November 2011


TC 123/SC 2

Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions


TC 123/SC 3

Plain bearings/Dimensions, tolerances and construction details

2-3 Houston (USA) * TC 67/SC 7 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures

2-3 Winterthur (Switzerland)

TC 172/SC 6

Optics and photonics/Geodetic and surveying instruments

3 Kyoto (Japan) TC 33 Refractories


TC 123/SC 5

Plain bearings/Quality analysis and assurance


TC 123/SC 6

Plain bearings/Terms and common items

3-4 Washington, D.C (USA)

* TC 85/SC 6 Nuclear energy, nuclear technologies, and radiological protection/Reactor technology

4 Troy (USA) TC 22/SC Road vehicles/Impact test procedures

10

4 Troy (USA) TC 22/SC 12

Road vehicles/Passive safety crash protection systems

4 Paris (France) TC 22/SC 21

Road vehicles/Electrically propelled road vehicles

4 Cincinnati (USA)

TC 60 Gears


TC 123 Plain bearings


TC 123/SC 7

Plain bearings/Special types of plain bearings

7-11 Osaka (Japan) TC 94/SC 13

Personal safety -- Protective clothing and equipment/Protective clothing

7-11 Beijing (China) TC 223 Societal security

7-12 San Diego (USA)


10 Gaithersburg (USA)

TC 30/SC 7 Measurement of fluid flow in closed conduits/Volume methods including water meters

10 Sao Paulo (Brazil)

TC 250 Project committee: Sustainability in event management

10-11


TC 260 Human resource management

11 Venice (Italy) TC 227 Springs

14 Tel Aviv (Israel)

TC 23/SC 18

Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems

14-18

Auckland (New Zealand)

* TC 217 Cosmetics

15-17


TC 189 Ceramic tile

17 Munich (Germany)

TC 44/SC 12

Welding and allied processes/Soldering materials

17-18

Pretoria (South Africa)


18 Johannesburg (South Africa)

TC 229 Nanotechnologies

21-22

Berlin (Germany)

TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes

22-23

Rome (Italy) TC 34/SC 4 Food products/Cereals and pulses

22-25

Boulogne sur Mer (France)

TC 234 Fisheries and aquaculture

23-24

Berlin (Germany)

TC 259 Project committee: Outsourcing


TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages

24 Stellenbosch (South Africa)

TC 98/SC 2 Bases for design of structures/Reliability of structures


TC 98/SC 3 Bases for design of structures/Loads, forces and other actions


TC 98 Bases for design of structures

28-30




* TC 147/SC 3

Water quality/Radiological methods

Pau (France) **

TC 67/SC 3 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements

(Jamaica) **

TC 93 Starch (including derivatives and by-products)

December 2011

2 Linz (Austria) **

TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

2 Brussels (Belgium)

TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection


TC 158 Analysis of gases


TC 17/SC 3 Steel/Steels for structural purposes

12-16

Sydney (Australia)

TC 108/SC 5

Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machines

13-14

Heidelberg (Germany)

TC 23/SC 15

Tractors and machinery for agriculture and forestry/Machinery for forestry

January 2012

11-12

Paris (France) TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions

Charlotte (USA)

**


January-February 2012

30-4 Paris (France) **

TC 236 Project Committee: Project Management

30-4 Paris (France) * TC 258 Project, programme and portfolio management

February 2012

13-14

Orlando (USA) * TC 184/SC 2

Automation systems and integration/Robots and robotic devices

20-24

Guangzhou (China)

* JTC 1/SC 6 Information technology/Telecommunications and information exchange between systems

20-24

Kyoto (Japan) * JTC 1/SC 35 Information technology/User interfaces

20-24

Paris (France) **

TC 23/SC 2 Tractors and machinery for agriculture and forestry/Common tests

22-23

Geneva (Switzerland)

* TMB Technical Management Board

Florida (USA) **

TC 115 Pumps

February-March 2012

25-5 Toulouse (France)

**

TC 34/SC 12

Food products/Sensory analysis

28-2 Berlin (Germany)

**

TC 107 Metallic and other inorganic coatings

March 2012

12-16

Milan (Italy) * TC 172/SC 7

Optics and photonics/Ophthalmic optics and instruments

29 Frankfurt (Germany)

* TC 23/SC 19

Tractors and machinery for agriculture and forestry/Agricultural electronics

(Australia) **

JTC 1/SC 36 Information technology/Information technology for learning, education and training

April 2012

15-20

(USA) **

TC 110 Industrial trucks

15-20

(USA) **

TC 110/SC 1

Industrial trucks/General terminology

15-20

(USA) **

TC 110/SC 2

Industrial trucks/Safety of powered industrial trucks

16 Berlin (Germany)

**

TC 161 Control and protective devices for gas and/or oil burners and appliances

16-20

Durban (South Africa)

**

TC 135 Non-destructive testing

16-20

La Plaine St-Denis (France)

* TC 198 Sterilization of health care products

16-20

Melbourne (Australia)

**

TC 204 Intelligent transport systems

17 Senlis (France) **

TC 117 Fans

23-27

Nairobi (Kenya)

**

TC 34 Food products

25-26

Moscow (Russian Federation)

**

TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems

Bern (Switzerland)

**

TC 113 Hydrometry


**

TC 135/SC 3

Non-destructive testing/Ultrasonic testing


**

TC 135/SC 5

Non-destructive testing/Radiation methods

May 2012


**



**

TC 46/SC 4 Information and documentation/Technical interoperability


* TC 46/SC 11


8 Chicago (USA) * TC 68/SC 7 Financial services/Core banking

*

8-10 Sydney (Australia)

* TC 145/SC 1

Graphical symbols/Public information symbols

10 Chicago (USA) * TC 68 Financial services

10-11

Tel Aviv (Israel)

**

TC 184/SC 5

Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications

14-15

Rio de Janeiro (Brazil)

**

TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment

15-17

Buenos Aires (Argentina)

* TC 67/SC 5 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe

20-25

Jeju (Korea, Republic of)

* JTC 1/SC 7 Information technology/Software and systems engineering

20-25

Seoul (Korea, Republic of)

**

TC 228 Tourism and related services

21-25

Berlin (Germany)

**


22 Delft (Netherlands)

**


22 Delft (Netherlands)

* TC 195/SC 1

Building construction machinery and equipment/Machinery and equipment for concrete work

(Unknown) **

TC 126 Tobacco and tobacco products

(Australia) **

TC 145 Graphical symbols

June 2012

4-8 Paris (France) **



**

COPOLCO Committee on consumer policy

11-12

Paris (France) * TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes

11-15

Buffalo (USA) **

TC 108/SC 3

Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock measuring instruments

11-15

Kyoto (Japan) * TC 121 Anaesthetic and respiratory equipment

11-15

Kyoto (Japan) **

TC 121/SC 1

Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic machines

11-16

La Plaine St-Denis (France)

* TC 147 Water quality

13-14

Geneva (Switzerland)

* TMB Technical Management Board

19-22

Vienna (Austria)

* REMCO Committee on reference materials

20-21

Milan (Italy) **

TC 29/SC 10

Small tools/Assembly tools for screws and nuts, pliers and nippers

24-29

Madrid (Spain) * TC 37 Terminology and other language and content resources

Orlando (USA) * TC 10 Technical product documentation

*

Brussels (Belgium)

**

TC 34/SC 9 Food products/Microbiology

Calgary (Canada)

**

TC 67/SC 3 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements

Brugge (Belgium)

**

TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps

2nd Quarter 2012

(China) **

TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

(Greece) **

TC 92/SC 3 Fire safety/Fire threat to people and environment

(France) **


August 2012

27-31

Montreal (Canada)

**

JTC 1/SC 35 Information technology/User interfaces

September 2012

3-8 Zurich (Switzerland)

**


19-21

San Diego (USA)

**

GA General Assembly

22 San Diego (USA)

**

COUNCIL Council

23-28


**

TC 164 Mechanical testing of metals

23-28


**

TC 164/SC 1

Mechanical testing of metals/Uniaxial testing

23-28


**

TC 164/SC 3

Mechanical testing of metals/Hardness testing

23-28


**

TC 164/SC 4

Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)

24-26

Sydney (Australia)

* TC 54 Essential oils

24-28

Stockholm (Sweden)

**


Zibo city (China)

**


Cadiz (Spain) **


October 2012

1-2 Ottawa (Canada)

* TC 34/SC 11

Food products/Animal and vegetable fats and oils

8-12 (Unknown) **

TC 92 Fire safety

10-11

Berlin (Germany)

* TC 167 Steel and aluminium structures

10-17

(China) **

TC 23/SC 6 Tractors and machinery for agriculture and forestry/Equipment for crop protection

14-19

Tokyo (Japan) * TC 59/SC 14

Buildings and civil engineering works/Design life

15-19


* TC 146 Air quality


**

TC 138/SC 4

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels

(Unknown) **

TC 92/SC 2 Fire safety/Fire containment

(Brazil) **

TC 127 Earth-moving machinery

November 2012

Tokyo (Japan) **

TC 17/SC 1 Steel/Methods of determination of chemical composition

(Korea, Republic of)

**

TC 23/SC 7 Tractors and machinery for agriculture and forestry/Equipment for harvesting and conservation

(USA) **

TC 118/SC 6

Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air systems

4th Quarter 2012

(Saudi Arabia) **


Month unknown 2012

(Europe) **

JTC 1/SC 24 Information technology/Computer graphics, image processing and environmental data representation


**


Chicago (USA) **

TC 68/SC 4 Financial services/Securities and related financial instruments

Tokyo (Japan) **


(South Africa) **

TC 102 Iron ore and direct reduced iron

Sydney (Australia)

**


Sydney (Australia)

**

TC 138/SC 1


September 2012

23-28


**

TC 164/SC 2

Mechanical testing of metals/Ductility testing

Month unknown 2012

(Finland) **

TC 190 Soil quality

(China) **


(France) **

TC 205 Building environment design

(Thailand) **

TC 207 Environmental management

February-March 2013

25-1 (South America)

**


March 2013

(Kenya) **

JTC 1/SC 36 Information technology/Information technology for learning, education and training

April 2013

10-11

Helsinki (Finland)

**

TC 117 Fans

Paris (France) **

TC 29/SC 5 Small tools/Grinding wheels and abrasives

May 2013

13-16

Chicago (USA) **


13-17

(Italy) **

TC 29 Small tools

13-17

Guangzhou (China)

* TC 68 Financial services

27-31

Shanghai (China)

**

TC 4 Rolling bearings

Ottawa (Canada)

**


(China) **


Paris (France) **

TC 46/SC 11


August 2013

26-30

(South America)

**


September 2013


**

TC 123/SC 2

Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions


**

TC 123/SC 3

Plain bearings/Dimensions, tolerances and construction details


**

TC 123/SC 5

Plain bearings/Quality analysis and assurance


**

TC 123/SC 6

Plain bearings/Terms and common items


**

TC 123/SC 7

Plain bearings/Special types of plain bearings

Tokyo (Japan) **


October 2013

Mexico (Mexico)

**

TC 113 Hydrometry

Month unknown 2013

(Australia) **

REMCO Committee on reference materials

(South Africa) **


(Unknown) **

TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

(USA) **



**

TC 107 Metallic and other inorganic coatings

Porto de Galinhas (Brazil)

**

TC 135/SC 9

Non-destructive testing/Acoustic emission testing

(Norway) **

TC 138/SC 1



**

TC 164/SC 5

Mechanical testing of metals/Fatigue testing

(Portugal) **

TC 228 Tourism and related services

May 2014


**

TC 46/SC 11


Month unknown 2014

(USA) **


(Brazil) **


(Germany) **


(USA) **


Month unknown 2015

(South Africa) **



**


Documents

· Web viewNuclear energy, nuclear technologies, and radiological protection ISO/DIS 8300 * Nuclear fuel technology — Determination of plutonium content in plutonium dioxide of