Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
Xtre
me
Polis
hing
Sys
tem
sPRODUCT IDENTIFIER – ECAST B
DATE & VERSION - 15 May 2023 Version 01SAFETY DATA SHEET (SDS)
Page 1 of 1
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Product Identifier: ECAST BOther means of identification: None
Recommended use: Epoxy Hardener, Casting SystemManufactured by: Xtreme Polishing Systems
2200 Nw 32nd Street#700Pompano Beach, FL
E-mail Address : www.xtremepolishingsystems.comPrepared by: The Health, Safety and Environmental Department
Telephone number of preparer: 800-659-5843Fax number:
Emergency Telephone Number: 24-Hour Emergency Telephone Number Canada (CANUTEC) : (613) 996-6666
SECTION 2. HAZARDS IDENTIFICATION
GHS Classification of hazardous productAcute Toxicity, Oral (Category 4)Acute Toxicity, Dermal (Category 4)Skin Corrosion/irritation (Category 1B)Serious eye damage/irritation (Category 1)Hazardous to the aquatic environment - acute (Category 3)Hazardous to the aquatic environment - chronic (Category 3)
GHS Label Elements: Hazard Pictograms/symbols
Signal Word: DANGERHazard and Precautionary Statements:H302 + H312 Harmful if swallowed or in contact with skinH314 Causes severe skin burns and eye damageH318 Causes serious eye damageH412 Harmful aquatic life with long lasting effects
P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P301 + P312 + P330 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [shower]. P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. P363 Wash contaminated clothing before reuse. P405 Store locked up. P501 Dispose of contents/container into safe container in accordance with local, regional or national regulations.
Other Hazards Known: None knownGHS Special Labeling: None known
SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name CAS Number Concentration (%)Poly[oxy(methyl-1,2-ethanediyl)], .alpha.-
hydro-.omega.-hydroxy-25322-69-4 1 - 10 %
Trimethylolpropane poly(oxypropylene) triamine
39423-51-3 30 - 50 %
SECTION 4. FIRST AID MEASURES
Inhalation IF INHALED: Remove person to fresh air and keep comfortable for breathing. If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.
Ingestion IF SWALLOWED: Keep respiratory tract clear. Do NOT induce vomiting. Do not give milk or alcoholic beverages, Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital.
Skin Contact IF ON SKIN (or hair): Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty. If on skin, rinse well with water. If on clothes, remove clothes.
Eye Contact IF IN EYES: Small amounts splashed into eyes can cause irreversible tissue damage and blindness. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Most important symptoms and effects (acute and delayed)None known.
Indication of any immediate medical attention and special treatment neededProvide general supportive measures and treat symptomatically. Chemical burns: Flush with water immediately. While flushing, remove