Website Wechat - s3-ap-southeast-2.amazonaws.com...Railless mounting system allows for easy logistics, cost-effective warehousing and easy mounting. Light, small and easy mounting

Catalogue / 2020

Fujian Antai New Energy Tech. Co., Ltd

Fujian Zhangzhou Antai Aluminum Co., Ltd

Office Add: 30F, W Square, 1801 Huandao East Road, Siming District, Xiamen, China 361008

Factory Add: Guanshan Industrial Park Changtai County, Zhangzhou, China

+86-592-5902515 [email protected]

Website Wechat

Fujian Antai New Energy Tech. Corp (Antai), with a registered capital of

300 million RMB, which headquartered in Xiamen, has branches in Japan,

Singapore, Australia and offices in Shanghai, Vietnam, Brazil, Philippines,

Malaysia, etc. Antai owns two large aluminum profile production bases in

Zhangzhou, Fujian, covering a total area of 213,333 square meters. With

a complete production chain of aluminum ingots casting, extrusion,

oxidation, and fine finishing, equipped with perfect laboratory

equipment to control the product quality, Antai has grown into one of

the largest aluminum plants in east China.

Antai, with over 600 employees and 60 designers and engineers, is a

R&D, design, production and marketing of an integrated enterprise that

committed to major business covering solar mounting system,

aluminum formwork system and other aluminum profiles.

Thanks to the long-term reliable products and the rapid response

services, Antai has become the most competitive supplier of diversified

aluminum profile application solutions and the most trusted partner to

the clients at home and abroad.

About us

Engaged in the production, sales and leasing of aluminum formwork. Provide aluminum formwork system and corresponding supporting materials for various types and scales of commercial and residential buildings.

Aluminum formwork systemFocus on the aluminum alloy extrusion profiles applied in the fields of science and technology communication, construction, transportation, interior decoration and sports, etc.. Customization of various special aluminum profiles according to samples from customer is available.

Other aluminum profileSpecialize in R&D, manufacturing and sales of solar mounting system. Products are strictly in accordance with AS/NZS1170, JISC8955 and other international advanced standards for research, development and production.

Solar mounting system

Core BusinessCore Business

2006

2011

2015 2016

2017

2018

MilestoneMilestone

2006.

2007.

2008.

2009.

Fujian Zhangzhou Antai Aluminium Co., Ltd established

Acquired ISO9001 certificate

Solar mounting system exported to Australia, US, Japan, etc.

Antaisolar founded in Xiamen city

2017.03

2017.09

2017.10

2017.12

Carried out PV plant service and aluminum formwork system business

Awarded Yearly Excellent Solar Mounting Enterprise by Solarbe

Set up the Philippine office

Exchange and cooperation with representatives from light alloy research institute of Central South University

2018.04

2018.10

2018.10

2018.11

2018.11

Set up the Shanghai office

Set up the Japan and Australia branches

Antai and Central South University signed an agreement about the establishment ofacademician working station

Set up the Brazil office

Awarded Yearly Excellent Solar Mounting Enterprise by Solarbe and Best Solar Racking Supplier by Chinese Excellent PV

2011.

2013.

The first Chinese aluminum solar mounting company entered Japan market

Ground screw production line set upexpanding production base

2015. Opened a logistic center in Japan 2016. Accumulative solar mounts shipment reached 6GW worldwide

Accumulated Solar Mounting Shipment Worldwide

No.1 Solar Mounting Supplier to Japan Market in China

10.8GW

GW4.55

Solar racking monthly production

（Unit：MW）

0

140

280

420

560

700

2017 2018 2019 2020 2021 2022

Annual production of aluminum profile

（Unit：10,000 tons）

2

4

6

8

10

2017 2018 2019 2020 20210

2022(Prediction) (Prediction)

20192019.05

2019.09

2019.10

Set up the Malaysia office

Set up new production base

Set up the Singapore branch

Ingots

Ship out

Packing

Fine f inishing

Anodizing

Powder coat ing

01

03

04

07 08

09

05 0602

Quality Inspect ion

Own factory with complete aluminum production chain from ingot melting, extrusion, anodizing, powder coating, fine finishing to packing.

Melt ing

Cast ing

Mold

Extrusion

Aging

M

Complete Supply Chain

Salt Spray Test ing

Chemical E lement Test ing

Whole process inspection from raw material to finished product including section size, thickness, torsion, bending, angle, surface quality, etc.

Spectrum Analyzer

Fi lm Thickness Test ing

Anti-pul l forcetest ing

Prel iminar y Angle Precise Angle Deviat ion Cross Sect ion Width Thickness Measurement Hardness Measurement

A quality-guarantee system for our aluminum products consists of our advanced testing equipment, excellent inspectors and thorough QC management.

Quality Control

Sampling Inspection

Japan Branch:1-18-14 Nihonbashi, Chouku,Tokyo, 103-0027, Japan

Shanghai Office:Room A513, Building A, No. 508 Chundong Road, Minhang District, Shanghai

Singapore Branch:R10 Anson Road#13-15 International Plaza, Singapore

Brazil Office:Av Queiroz Filho, 1700, Sala 1014 Torre E, Villa Lobos Office Park, Bairro Vila Hamburguesa, São Paulo, SP, CEP 05319-000.

Philippines Office:San Agustin Village, Barangay Moonwalk, Paranaque City

Global Layout

Australia Branch:13 Redrock Street,Murarrie QLD 4172

Vietnam Office: 43 Tan Da Str, Ward 10, Dist.5, Hochiminh City, Vietnam

Malaysia Office:188, Jalan Kuching, Taman Tasik Indah, 51200 Kuala Lumpur, Wilayah Persekutuan Kuala Lumpur, Malaysia

5000

0.1

China

Shipment:MW

Cumulative solar mount shipment reach 10.8GWBy 2019

Japan

South Korea

Austral ia

Indonesia

Phil ippines

SingaporeMalaysia

Vietnam

Thailand

Myanmar

Sri lanka

America

Colombia

El Salvador

Brazi l

Nigeria

Argentina

India

Jordan

Saudi Arabia

Germany

Romania

Denmark

Mexico

Project reference

2：Adjustable tilt solar mount - Australia

1：Metal roof mount - Malaysia

3：Triangle roof mount - South Korea

4：Metal roof mount - Philippines

2：Carport mount - Mexico

1：Ground mount - Vietnam

3：Pile ground mount - South Korea

4：Ground mount - Japan

Rich experience

Technical support

Factory Advantages

R&D Ability

International Standard

Focus on aluminummounting system forover 14 years

TOP1 racking supplier in Japan market

Design drawing - 2 working days

On site installation instruction

Complete Industries Chain (quality control, fast delivery)Monthly capacity over 500MW

Large-scale project design since 2008

OEM & ODM can be acceptable

JIS 2011/2017, AS/NZS 1170, etc.

Heat treatment T6

Tensile strength (MPa)

Proof strength (MPa)

262 T5

T5

T6

T6263

241

295

Exhibition 30

Carport mounting

Railess metal roof mount

01 Metal roof solar mount

03

05

07

Standing seam mount

Tile roof solar mount

Triangle roof mount

Railess ballasted mount

Adjustable tilt roof mount09

11

13

Pile ground mount15 Ground mount1719 MAC ground mount

Waterproof carport mount

Single pole carport mount

Carport mount21

23

25

Accessories 27

Ground screw29

Features

Application Pitched roof

Up to 60°

Up to 20m

Suitable for most types of cladding

Framed, unframed

Landscape, portrait

Anodized aluminum 6005 T6 stainless steel 304

AS/NZ1170.2:2011, JIS C 8955:2011

Roof Slope

Building height

Roof cladding

PV module

Module orientation

Material

Standard

B

C

D

A

Metal roof solar mounting system

Solid, versatile

for all

metal sheet roofs

Use to secure rails through roofing material. Fix the L bracket(together with rubber pad) to the rafter using SUS 410 Screw.

Supporting PV modules, aluminum extrusion, length customizable. Connect the rail withL bracket by T-moduleand tighten the bolt.

Connect multiple railstogether, forms a rigid joint. Slide the spliceson the rear side of rail with the next rail segment.

Providing bond from rail to module.Slide the end clamp tightly againstthe solar module andfasten tightly using the Allen bolt.

D : ClampA : L bracket B : Rail C : Rail splice

Subject to errors and technical modifications. 2020©Fujian Antai New Energy Tech. Co.,Ltd

yearswarranty

10

The metal roof mounting system is suitable for roofing with corrugated sheet metal, trapezoidal metal

sheet. L Feet, hanger bolt are available for foot options, making installation more fast, competitive

and reliable. Systems are fully compliant with the Australian and other international standards on

wind & snow load, making it suitable for a wide variety of climatic zones.

1/2

Recommended wind speed Up to 79.2m/s ( wind region D )

B

D E

C

A

Features

Application Pitched roof

Up to 60°

Up to 20m

Suitable for most types of cladding

Framed, unframed

Landscape, portrait


AS/NZ1170.2:2011, JIS C 8955:2011

Roof Slope

Building height

Roof cladding

PV module

Module orientation

Material

Standard

Tile roof solar mounting system

Flexible, simple

clean on

different tile roofing

A : Tile roof hook B : Rail C : Rail splice

D : Inter clamp E : End clamp Side view


yearswarranty

10

3/4

The tile roof solar mounting system offers perfect solution for installation on tile roofing, the roof

fastening is done using highly-resistant stainless steel roof hooks, which is suitable for nearly all coverings,

such as pantile, plain tiles, slate tiles. Systems are fully compliant with the Australian and other

international standards on wind & snow load, making it suitable for a wide variety of climatic zones.

Recommended wind speed Up to 79.2m/s ( wind region D )

D

B A

CE

Features

Application Suitable for Lysaght® Kliplok® 406, 700, Lysaght®

Locked seam®, Stramit® Speed Deck, Fielders®

Up to 60°

Up to 20m

Framed, unframed

Landscape, portrait


AS/NZ1170.2:2011, JIS C 8955:2011

Roof slope

Building height

PV module

Module orientation

Material

Standard

A : Locked seam® B : L foot C : Rail D : Inter clamp

E : End clamp Kalzip® Kliplok® 406 Kliplok® 700

Standing seam roof mounting system

The standing seam roof clamps make mounting on folded seam roof particularly easy. The clamps are

simply attached to the standing seams. The clamps offer a secure fastening without penetrating the

roof sheets, ensuring maximum stability with minimum weight. The variety of system combinations

like L-foot, fixed foot or PV module clamp directly, allows it to be connected quickly to all rail components.

Headache-free

mounting solution

for metal roofs with

standing seam

design


yearswarranty

10

Recommended wind speed Up to 64m/s ( wind region C )

5/6

Features

Application Trapezoidal sheet, sandwich roofing, standing seam

0.8mm minimum

Up to 60°

Up to 20m

Up to 52m/s ( wind region B )

Framed

Landscape, portrait

Anodized aluminum 6005 T6 stainless steel 304, 410

AS/NZ1170.2:2011, JIS C 8955:2011

Min. sheet thickness

Roof slope

Building height

Recommended wind speed

PV module

Module orientation

Material

Standard

C

B

A

A : Roof attachment

Trapezoidal roof clamp

B : Inter clamp C : End clamp

Railless metal sheet mounting system

The railless system facilitates the rapid mounting of framed PV modules on trapezoidal metal sheet roofs

with minimum thickness 0.8mm, only four components are required to install the modules directly to the roof.

A base mounting clip is 100mm or 140mm long, therefore easy to carry and attach to almost all trapezoidal

and sandwich roofs. The EPDM sheet is in the package to seal the screw against the metal sheet..

Railless mounting system allows for easy logistics, cost-effective warehousing and easy mounting.

Light, small

and easy mounting

on trapezoidal

metal sheet


yearswarranty

10

7/8

Kliplok® 700 Kliplok® 406

Features

Application Flat roof

Fixed, 10-15°，15-30°，30-60°

Up to 45°

Up to 20m

Framed

Landscape, portrait

Anodized aluminum 6005 T6, stainless steel 304, 410

AS/NZ1170.2:2011, JIS C 8955:2011

Tilt angle

Roof slope

Building height

PV module

Module orientation

Material

Standard

C

BF

E

D

A

A : Front leg B : Back leg C : Rail

D : Rail splice E : Inter clamp F : End clamp

Adjustable tilt flat roof mounting system

The adjustable tilt flat roof mounting system will easily fit different flat roofs or open terrain applications,

due to its variable tilt angle and footing options for both roof clamp and roof penetration. The solar system

can be used as fixed tilt or adjustable tilt , allows for project-specific adjustments and optimize

solar power output. The innovative design and high pre-assembly eliminate the need for on-site cutting,

welding and enable quick and easy field PV module installation.

Adaptable, ecomomical

mounting on almost

all flat roof coverings


years10Warranty

——Mount on trimdek

Up to 79.2m/s ( wind region C )Recommended wind speed

9/10

E

F

D

Features

Application Flat roof, open terrain

10°, 15°, 20°, 30°

Up to 20m

Up to 99cm

Framed, unframed

Landscape, portrait


AS/NZ1170.2:2011, JIS C 8955:2011

Tilt angle

Building height

Snow load

Up to 64m/s ( wind region C )Recommended wind speed

PV module

Module orientation

Material

Standard

C

B

A2

A1 : Triangle bracket A B : Rail

C : Rail splice D : End/Inter clamp E : T-module

Triangle flat roof mounting system

Antaisolar triangle mounting bracket is a newly developed product for flat rooftop installation,

more cost-effective than the traditional bracket. With only two supporting angle aluminums, it can

be installed without rail, or with rail. For mini power solar plant , it's recommended to design without

rail, which helps to reduce the cost and simplify packing. Fold design allows for easy transportation.

Railless mounting system allows for easy logistics, cost-effective warehousing and easy mounting.

Most economical

flat roof

mount solution


11/12

years10Warranty

E

F

D

C

B

A1

A2 : Triangle bracket B

5°, 10°

Features

Application Flat roof, landfill, open terrain

400mm recommended

Up to 24m

Framed, unframed

Landscape recommened


AS/NZ1170.2:2011, JIS C 8955:2011

Tilt angle

Inter-row spacing

Building height

PV module

Module orientation

Material

Standard

CD

EF G

HB

A

Rail-free ballasted

flat mounting system

The railless ballasted roof mounting system is suitable for commercial flat rooftops, a south-oriented racking

solution for mounting framed modules on flat roofs with 5°，10° mounting tilts. Variable ballasted weight

allows for local wind rating requirements to be meet on an individual basis. Eliminating rails equate to

just a few boxes per system, without the inconvenience of long, cumbersome rails.

The simple and straightforward installation process of the system can save time and reduce the labor cost.

Best price value

available,

Q235 steel


13/14

A : Front support B : Rear support C : Inter support D : Ballast tray

F : Protection mat ( Inter )

G: Buckle H : ClampE : Protection mat ( Front and rear )

years10Warranty

Up to 43m/s ( wind region A )Recommended wind speed

C D

EF G

HB

A

Features

Application Open terrain, landfill, and disposal

Up to 60°

Depending on load condtion, refer to manual

Up to 50cm

Up tp 79.2m/s ( wind region D )

Framed, unframed

Landscape, portrait


Hot-dipped galvanized steel Q235B

AS/NZ1170.2:2011, JIS C 8955:2011

Elevation angle

Distance between footings

Snow load


PV module

Module orientation

Material

Standard

A: Ground screw foundation

Ground mounting system

Cost optimized

aluminum

ground mount

solution

Subject to errors and technical modifications. 2020©fujian Antai New Energy Tech. Co.,Ltd

Antaisolar ground mount solution is designed for flat open land, from commercial to utility level. The

supporting beam is delivered pre-assembled for unfolding fast at site. According to actual local conditions,

different designs are offered to meet high loads caused by wind and snow in order to achieve higher cost

performance. It can use ground screw or concrete block as foundation. Made of aluminum, the system is

an extremely low-maintenance system during its entire life span, and fully recyclable, ideal for quick installation.

15/16

warrantyyears10

B: Concrete foundation

The SC ground mounting system is thesimplest and easy solutions designed for ground mount installations.

The NW ground mounting system is a convenientsolution designed for ground mount installations,from commercial to utility level.

The CG ground mounting system is a cost optimized design based on NW, the supporting footing is delivered with highest pre-assembly to unfold at site.

A

B

GH

A : Pre-assembled beam B : Pillar C : Pillar cap D : Rail

F : Rail clamp G : Inter clamp H : End clampE : Rail splice

The pile ground mounting system is a very economical solution for large commercial and utility

scale installations, especially on uneven terrain. The use of ramming posts eliminate the need for additional

excavation works, and pile-driven machine reduce labor and time remarkably on site, piling finishes in

less than 3 minutes, for large projects, this means high cost savings. Single post system allows for easy

maintenance around and under the modules. Double post optional for larger span and bigger array.

Features

Application Open terrain

Up to 60°

Pile in or pre-cast, bored pier

Up to 150cm

Framed, unframed

Landscape, portrait



AS/NZ1170.2:2011, JIS C 8955:2011

Elevation angle

Foundation

Snow load

Up to 79.2m/s ( wind region D )Recommended wind speed

PV module

Module orientation

Material

Standard

Ideal for

uneven terrain,

economical

for large projects


17/18

yearswarranty

10

D

Pile ground mounting system

D

C

E

F

E-W direction optional

MAC ground mounting system

Features


Up to 20°

7500mm above

Up to 150cm

Framed, unframed

Landscape, portrait

SCS440, SCS490. POSMAC440, POSMAC490

AS/NZ1170.2:2011, JIS C 8955:2011

Adjustable angle

Foundation

Snow load

PV module

Module orientation

Material

Standard

Antaisolar MAC ground mounting system is developed to diversify current product portfolio especially for

large-scale ground solar power plant. Utilizing magnesium aluminum alloy coating steel(MAC steel) as the

main supporting body to replace traditonal hot-dip galvanized materials.

About MAC steel: Formed by high-temperature curing of Zinc(Z), aluminum (Al) and magnesium (Mg), and

its composed of dense ternary eutectic struture of Zn, Al and Mg, so that the surface of MAC steel has a dense

barrier that effectively prevents the penetration of corrosion factors.

superior corrosion

resistance,

self-healing,

long lasting

easy processing.


19/20

yearswarranty

10

Up to 64m/s Recommended wind speed

A : C Steel C : L Connector

D : Foot Seat E : Pillar F : Inter/ End Clamp

B : Angle Steel

A

B

C

D

E

F

Pile Foundation

Service life With environment C1-C5M,service life from 20-80 years.

A

B

H I

F E

A : Foot seat B : Pole C : Supporting Beam D : Beam connector E : Rail

F : Rail splice G : Rail clamp H : Inter clamp I : End clamp

Carport solar mounting system offers a simplified and economic solution providing shade for parking a

solar power generation, it is designed with different options for both single and double rows of parking,

tailored for most module types, orientations, and inclinations. Various foundation options include precast

concrete, bored pier and ground screw. Long spans between foundations reduce cost and simplify the

installation process.

Solar carport is one of the fastest growing trends in the photovoltaic market, effectively uses existing

parking space, streamlined design making it the ideal choice to present environmental friendly image or

work as electrical vehicle charging station.

Features


Recommend below 30°

5000mm above

Up to 150cm

Framed, unframed

Landscape, portrait



AS/NZ1170.2:2011, JIS C 8955:2011

Elevation angle


Snow load


PV module

Module orientation

Material

Standard

Economical

multi-function

structure for

solar purpose


21/22

warrantyyears10

D

D

Carport solar mounting system

C

G

A : Foot seat B : Pole C : Supporting Beam D : Rail clamp

F : Waterproof rail clamp G : Water guide gutter H : Water guide railE : Module clamp

The waterproof solar carport develops under various market’s feedback. Solar Carports are an ideal solution

for energy generation on big surfaces, otherwise unused. Besides energy production, they bring maximum

convenience by providing cool, shady parking spaces in summer also protection during rainy days and can

become charging stations for electric bicycles, scooters and cars.

Remarks: this type of waterproof solar carport is suitable for framed module installation.


23/24

warrantyyears10

A

B

F

E

D

D

C

Waterproof carport mounting system

G

H

Waterproof

multi-function

structure for

solar purpose

Features


Recommend below 30°

5000mm above

Up to 150cm

Framed, unframed

Landscape, portrait



AS/NZ1170.2:2011, JIS C 8955:2011

Elevation angle


Snow load


PV module

Module orientation

Material

Standard

AB

E

DC

Features


Up to 20°

7500mm above

Up to 150cm

Up to 64m/s

Framed, unframed

Landscape, portrait



AS/NZ1170.2:2011, JIS C 8955:2011

Elevation angle


Snow load


PV module

Module orientation

Material

Standard

A : Supporting beam B : Horizontal beam C : Pole D : Bracing

F : Connector G : Water guide gutter H : Inter/ End clampE : Hook

Single post carport mounting system

Cost optimized

waterproof

multi-function

structure for

solar purpose

Subject to errors and technical modifications. 2020©fujian Antai New Energy Tech. Co.,Ltd

25/26

The Single post carport mounting system is an ideal solution for energy generation on big surfaces, otherwise

unused. Besides energy production, it brings maximum convenience by providing cool, shady parking spaces

in summer also protection during rainy days and can become charging stations for electric bicycles, scooters

and cars. With strong stability steel construction, it can have a longer span to reduce cost and meet the higher

needs of customers for shed. It can be designed both waterproof or non-waterproof available.

warrantyyears10 F

E

G

H


27/28

Inter clamp

Hanger bolt

Cable clip

Railless roof clamp

29/30

Item No. Length Out Dia. Thickness Flange Out Dia. Material

AT76xT3.5x1200AT76xT3.5x1400AT76xT3.5x1600AT76xT3.5x1800AT76xT3.5x2000

1200mm1400mm1600mm1800mm2000mm

76mm 3.5mm 220mmHot dippedgalvanizedsteel, Q235B

AT76xT3x1200AT76xT3x1400AT76xT3x1600AT76xT3x1800AT76xT3x2000

1200mm1400mm1600mm1800mm2000mm

76mm 3mm 200mmHot dippedgalvanizedsteel, Q235B

Length can be customized.

The SNEC in Shanghai, China

All-energy 2019 in Australia

Exhibitions

The agricultural Week in Japan

Documents

Website Wechat - s3-ap-southeast-2.amazonaws.com...Railless mounting system allows for easy logistics, cost-effective warehousing and easy mounting. Light, small and easy mounting