Materials and Processes Technologies V

Selected, peer reviewed papers from the 5th International Conference on Manufacturing Science andEngineering (ICMSE 2014), April 19-20, 2014, Shanghai, China

Bearbeitet vonJingtao Han, Xianghua Liu, Zhengyi Jiang

1. Auflage 2014. Taschenbuch. 2870 S. PaperbackISBN 978 3 03835 121 4

Weitere Fachgebiete > Technik > Werkstoffkunde, Mechanische Technologie

schnell und portofrei erhältlich bei

Die Online-Fachbuchhandlung beck-shop.de ist spezialisiert auf Fachbücher, insbesondere Recht, Steuern und Wirtschaft.Im Sortiment finden Sie alle Medien (Bücher, Zeitschriften, CDs, eBooks, etc.) aller Verlage. Ergänzt wird das Programmdurch Services wie Neuerscheinungsdienst oder Zusammenstellungen von Büchern zu Sonderpreisen. Der Shop führt mehr

als 8 Millionen Produkte.

Table of Contents

Preface and Conference Organization

Chapter 1: Alloys and Non-Ferrous Materials

Influence of Overburning on Microstructure and Property of 2024 Aluminum AlloyS.X. Zhang, Y.P. Zhu and G.Y. Cai 3

Effects of Nb Element on Mircostructure, Thermal Conductivity and Melting Point of Cu-Ni-Nb Alloy Prepared by Vacuum Arc-MeltingB.P. Lu, J.Z. Zhang and Y.F. Fang 8

Dissolution of Alumina in Molten Aluminum Electrolyte Based on Perforated AnodeM.R. Han, J.G. Yin and L.Q. Huang 13

Surface Characterization and Machinability of Zirconium Alloys in View of JewelryApplicationI. Forno, P.C. Priarone, L. Settineri and M. Actis Grande 18

Hot Deformation Behavior and Microstructural Evolution of Al-Zn-Mg-Cu Alloy withDifferent Starting StructuresX.D. Zhao, H.Q. Chen and J.S. Liu 26

Discussion on Technologies of Preparation of Foam Aluminum Metallic Material byInfiltration Casting MethodW.F. He, S.Y. Zhong and Y.Z. Chen 35

Effect of Indium on Precipitation Kinetics of an Al8Si0.4Mg Cast AlloyG.Q. Wang and S.G. Liu 39

Influence of MgO on Calcium Aluminate Slag System with Lower CalciumB. Wang, J.X. Zhang, H.L. Sun and S.F. Zong 43

Processing Map of Mg-13Al-3Ca-3Zn-1Nd-0.2Mn Magnesium AlloyW. Chen, G. Chen, J. Zhai and L. Ma 48

Structure and Dynamical Relaxation in Undercooled Liquid of Cu50Co50 with MiscibleGapY. Qi, L. Wang and T.Q. He 54

The Effect of Mixed RE Elements on Microstructure and Mechanical Properties of Die-CastAZ91D AlloyJ.W. Yuan, X.G. Li, K. Zhang, Y.J. Li, M.L. Ma, G.L. Shi and M. Li 59

Use of Strain Energy Density W and Qo as Quality Indices to Study the Effect of Hipping onCast Aluminium Alloy 354 under Different Aging ConditionsG.D. Babu, P. Sibal and M.N. Rao 66

Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg AlloyY.J. Lang, G.X. Zhou, W. Liu, J. Hao, L. Qiao, S. Wang and J.Z. Jiang 72

Comparison of Mechanical Properties of 357-T6 Aluminum Alloy Aast under GravityPermanent Casting and Low Pressure Die CastingP. Chen, J.M. Zeng, W.K. Gan and J.B. Liu 77

Diffusion Bonding of Commercially Pure Titanium to Q235B Using Copper as InterlayerJ.G. Liu, J.T. Han, J. Liu and S. Ji 81

Mechanical Properties of A356 Aluminum Cast Alloy Shaped by Permanent Mold CastingP. Chen, J.M. Zeng, W.K. Gan and J.B. Liu 89

Superplasticity Mg Alloy Fabricated by Friction Stir ProcessingS.X. Sheng, Y.L. Guo, S.F. Liu and S.L. Wu 93

The Technique Study on Silicon Brass Recrystallization Annealing Aided by Electric PulseTreatmentS.A. Tukur, J.Z. Wang, J.G. Qi, Z.F. Zhao and J.Y. Wang 97

Wettability, Surface Tension and Work of Adhesion of Cu-Ti Alloys on Yttria Partially-Stabilized Zirconia at 1273KW.J. Mao, H. Sannomiya, N. Shinozaki and T. Ogawa 102

Combustion Synthesis Sintering of Ni-Al Powder AlloysL.J. Qin, F.X. Huang, D.W. Jin and W. Li 108

Influence of High Magnetic Field on β-a Phase Transformation in TC4 Titanium AlloyH.M. Wang, G.R. Li, Y.M. Li, Y.H. Cui, C.X. Peng, R. Zheng, P.S. Li and Y.T. Zhao 112

Low Temperature Superplasticity of 5083 Aluminum AlloyS.F. Liu, Y. Cai and S.L. Wu 116

Prediction of TCP Phases in Nickel-Base SuperalloysK. Zhao 120

Chapter 2: Iron and Steel

Bake Hardening Properties of Ultra-Rapid Annealed Ultra-Low Carbon Bake HardeningSteelD.C. Xu, J. Li, Y.D. Liu and X.W. Kong 127

Study on Internal Quality of Billets for 20CrMnTiH SteelH.G. Li, T.M. Chen, L. Chen, J.Q. Wang and W.Z. Yang 132

Study on Microstructure and Properties of X80 Pipeline SteelX.D. Huo, F. Dong and L.J. Li 138

Study on Microstructure and Property in Heat-Affected Zone of X80 Pipeline SteelX.D. Huo, Z.Z. Tian and L.J. Li 142

Thermal Simulation Study of CGHAZ Austenite Grain Growth Behavior of X80 PipelineSteelX.D. Huo, F. Dong and L.J. Li 146

Research on Mechanics Performance of TP304H Austenitic Stainless Steel in the Process ofAging at High TemperatureH. Li, J.F. Ni, M.D. Li, N.Y. Hu and Z.W. Wang 150

Experimental Study on Hydrogen Selective-Reduction of Niobium Containing Iron OrePowderY.S. Chen and T. Tian 157

Research on the Corrosive Factors of Q235 Steel in Simulate Ammonium Sulfate Solution ofAmmonia DesulphurizationL. He, D.S. Chen, F.F. Lou, Q.Q. Ye, W.J. Wei and Y.Z. Zhou 165

Microstructure and Mechanical Property Analyses of Brazing Titanium and Low CarbonSteel Using Silver-Based Brazing AlloyL.L. Yuan, J.T. Han and J. Liu 169

Research and Application of Basic Tundish Covering FluxZ.Z. Yang, G.Q. Li, J.P. Rao, Y.F. Wang, C.H. Huang and X. Hong 178

Research of Producing Reduction Steel Powder from GCr15 Steel ScrapX.X. Zhang, J.T. Han and J. Liu 182

The Research Status of Titanium Clad SteelJ.G. Liu, J.T. Han, J. Liu and S. Ji 187

Oxidation Behavior of T91 Steel in Water Vapor Atmosphere at 750°CG.M. Liu, C.F. Wang, G. Liu, Z.L. Liu and J.H. Tian 193

Research on the Size Distribution of Intragranular and Boundary Carbides of T91 Steelafter CreepQ. Wan, L. Chen, C. Luo, Z.G. Li, Y.M. Chen and B. Yang 198

Analysis on Alloying Elements of Selective Oxidation of TRIP SteelH.X. Teng, H.Q. Wang, G.H. Liu, G.R. Jiang, L.B. Liu and Y.L. Kang 206

High Temperature Oxidation Behavior of SUS310S Austenitic Stainless SteelT. Zheng and J.T. Han 212

Preparation and Characterization of Iron-Oxide-Coated-Zeolite AdsorbentL. Zhu, Y.Q. Lu and Z.J. He 216

Experimental Study on Refractory Weathering Steel Cold-Rolled Sheets RecrystallizationAnnealingD.M. Yao, Y.J. Zhang, J.T. Han and M.Y. Chen 221

Analysis of Boride Phase Composition in High Boron Alloyed Stainless Steel ContainingTitaniumL.L. Yuan, J.T. Han and J. Liu 226

b Materials and Processes Technologies V

Chapter 3: Composites

Synthesis of Sulfur-Doped Graphene from Sulfonated PolystyreneH. Gao, H.J. Guo and J.Z. Chen 235

The Properties of the Sodium Silicate Binder Composition Based on Quartzite DepositsM.M. Myrzakhmetov, M.T. Zhuginisov, D.T. Sartaev, E.S. Orynbekov, S.B. Aidarova and S.Turganbay 239

Study on Microstructure of Continuous Cf/Al Composite Material Prepared by HotPressing Diffusion MethodB.P. Lu, X.F. Liu and T.T. Shuai 245

Change Regulation of Hardness of Target around Crater Penetrated by Wf/Zr-BasedAmorphous Matrix Composite ProjectileX.H. Ye, H.G. Shi, M.M. Zou, K.W. Tian, J.B. Liu, L.J. Zhu, Z.Y. Zhang and Q. Wang 251

Adsorption of Cu(II) from Aqueous Solution onto Na-Bentonite/Poly AMPS/AA/AMCompositeY.A. Luo and S.C. Chu 257

Effects of Fillers on the Dynamic Properties of a High Performance Elastomer at VaryingStrain AmplitudeF. Ghezzo, X.G. Miao, C.L. Ji and R.P. Liu 261

Morphology, Thermal, Dynamic Mechanical and Mechanical Properties of Long GlassFiber Reinforced Thermoplastic Polyurethane Elastomers and Polyvinyl ChlorideCompositesK.Z. Zhang, Q. Guo and B.S. You 266

Investigation of Surface Roughness after Turning of One Kind of the Bio-Material withThermoplastic Matrix and Natural FibersJ. Zajac, Z. Hutyrová and I. Orlovský 275

Microstructure and Tribological Properties of Cu-Fe Based Braking MaterialsX.Y. Wang and H.Q. Ru 280

Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite MaterialsS.Y. Chen, X.R. Li, D. An, J. Liang and C.S. Liu 284

The Fabrication of High Silicon-Aluminum Composites and the Thermal ConductivityX.Y. Chen, Y.X. Li and J.Y. Liu 288

Study on Properties of Modified Porous Starch/ Natural Rubber CompositeX.M. Pan, M. Wu, S.D. Li, L. Fang, Z.F. Wang, Y.J.S. Gao, L.F. Li and S.Q. Liao 294

The Influence of SiO2 on Properties of Cellulose AerogelH. Mao, X.Y. Huang, C. Lin, L.B. Lu and Y. Cao 301

Design, Fabrication and Characterization of Fused Silica-Based Composites with an LTCC-Derived FSSX.G. Miao, Q.W. Feng, X.W. Fang, F. Ghezzo, Z.Y. Zhao and R.P. Liu 305

Effect of Cycle Index on the Microstructural Evolution of Alumina Particles ReinforcedAluminum Composites Treated by Cryogenic TreatmentH.M. Wang, G.R. Li, R. Zheng, P.S. Li, C.X. Peng, Y.M. Li, Y.H. Cui, Y.T. Zhao and Y. Jiang 310

Influence of Cooling Speed on the Microstructure of Particles Reinforced 7055AlComposites Subject to Regulatory Cryogenic TreatmentG.R. Li, H.M. Wang, Y.H. Cui, Y.M. Li, C.X. Peng, P.S. Li, R. Zheng, Y.T. Zhao and Y. Jiang 314

Preparation and Characterization of Resin-Derived Carbon Foams Containing HollowMicrospheresB. Wang, H.J. Li, Y.Y. Li, M.H. Hu, J.X. Xu and S. Cao 318

A Study of Polyurethane Rubber Composite Modified Asphalt MixtureZ.P. Yao, M. Li, W. Liu, Z.B. Chen and R.H. Zhang 324

Fluorescence Properties of Electrospun Bio-Based Polyamide/ Eu(TTA)3phen CompositeFibersX. Yang, B. Wang, Q.X. Jia and W.X. Tian 329

Preparation of Poly(m-toluidine)/Montmorillonite Composites and its Thermal StabilityH. Wang, R.S. Yang and Y. Wang 334

Advanced Materials Research Vols. 941-944 c

Effect of Diffusion Annealing on Defects Reduction of 6.5wt% High Silicon Steel CompositePlate after Hot DeformationS. Ji, J.T. Han, J. Liu and X.W. Yang 338

Investigation of Heat Treatment’s Influence on the Preparation of High Silicon SteelComposite SheetX.W. Yang, J. Liu, J.T. Han and S. Ji 343

Iron Loss Measurement on 6.5wt%Si Composite Plate Prepared by Clad Casting andConventional Rolling ProcessesS. Ji, J.T. Han, J. Liu and X.W. Yang 348

Production of 6.5wt%Si Composite Thin Sheet by Cold Rolling ProcessS. Ji, J.T. Han, J. Liu and X.W. Yang 354

Study on Heating Treatment of 45steel/60Si2CrA Multi-Layer Composite Armor PlateJ. Liu, J.T. Han and G. Gao 360

Study on Mechanical Property of 1Cr17/9Cr18MoV Multilayer Composite Armor PlateJ.T. Han and J. Liu 365

Study on Superabsorbent Material in Thermal Infrared CamouflageN.Y. Zhang, J. Yu and J. Zhang 370

Chapter 4: Micro/Nano Materials and Technologies

A Hydrogen Peroxide Electrochemical Sensor Based on Co-Doped Fe3O4 NanoparticlesX. Cui, Y.Q. Sun, R. Ma and X.C. Song 377

Effect of Collect Distance on the Fabrication of Aligned Nanofiber by Parallel ElectrodeH.Y. Liu, L. Xu, X.P. Tang and N. Si 381

Research Profiling of Carbon Nanotubes from 2000 to 2013L.Y. Zhou, W.G. Zuo, Q.F. Wei and C.S. Luo 385

The Raman Properties of Ag Doped ZnO Microrods Synthesized by Chemical VapourDepositionL.N. Wang, D. Zhou, S. Huo and Z.Q. Luan 391

Large-Scale Synthesis of Water-Dissoluble NanorodsK. Wang, C.L. Li, H.D. Xue, P. Liu and S.X. Xiao 395

Fabrication of PLA Nanoporous Fibers by DMF/CF Mixed Solvent via ElectrospinningX.P. Tang, L. Xu, H.Y. Liu and N. Si 400

Fabrication of PEG Hydrogel and PDMS Microstructures by a Simple UV Curing Processfor Nanobio-Chip ApplicationsY.H. Kim, J.W. Sohn, Y. Woo, J.H. Hong and J. Park 404

Performance of Electrospun Nanofibres on Adsorbing Gaseous Aromatic CompoundsS.W. Deng, Z.J. Qu, J.J. Deng, Y. Wang, S.B. Yu and X.J. Kang 411

Properties of Metallic Materials after Surface Self Nano-CrystallizationG.Y. Pei, D. Li and K.B. Li 416

Simulation of Electric Field for Carbon Nanotube Assembly by DielectrophoresisY. Chen and L.B. An 421

The Influence of Zn/Zr Ratios on CuO-ZnO-ZrO2 Catalysts for Methanol Synthesis fromCO2 HydrogenationY.H. Wang, W.G. Gao, Y.E. Zheng and H. Wang 425

Modification of the Fine – Aggregate Concrete by High Disperse Silica Fume and CarbonNanoparticles Containing ModifiersS.S. Kiski, A.N. Ponomarev, I.V. Ageev and C. Cun 430

Preparation and Mechanics Properties of the EP/TiO2 NanocompositesS.F. Bu, Y. Jiang and W.F. Zeng 436

Progress of Studies on Fabrication of TiO2 Nanotube Arrays on Ti or Ti Alloys byAnodizationM. Ma, J.X. Liu, Z.Y. Wu, X.R. Zheng, X.X. Hu and X.Y. Li 441

Study on Preparation and Property of Regenerated Liquid Reactive Dyes RegeneratedMagentaH.L. Yang, W. Xiang and G.J. Chen 445

The Effect of Different Ratio in Carbon Aerogel on Pore Structure in Ambient DryF. Wang, L.F. Yao, J. Shen, D.Y. Guan and Z. Fang 450

d Materials and Processes Technologies V

Influence of Softener on Rheological Characteristics of the Nanostructured ModifierV.V. Nelubova, V.V. Strokova, N.I. Altynnik and I.I. Podgorniy 454

Insertion versus Growth of Magnetic Nanoparticles in MgB2 Superconducting CompositesV. Sandu, G. Aldica, P. Badica, A. Kuncser and Y. Hayasaka 458

High Density Dislocation and Magnetoplasticity in Nano-Sized Alumina Reinforced 7055AlComposites Subject to High Magnetic FieldG.R. Li, H.M. Wang, P.S. Li, R. Zheng, Y.M. Li, Y.H. Cui, C.X. Peng and Y.T. Zhao 462

Effect of Carbon Nanotubes on Microstructure of Multiphase Composite Al2O3 CeramicsX.Q. Li, B. Fang and M. Xu 466

Quasicontinuum Analysis of Dislocation Propagation during NanocontactH.S. Wang, Y.S. Ni and H.B. Lu 470

Prepare and Formaldehyde Sensing Properties of Hollow Nanofibers In2O3C.B. Liu and X.Y. Liu 479

Polarization Dependent Nonlinear Absorption in Au Nanowire ArrayR.C. Xing, S. Xiao and J. He 483

Research on Surface Modification of Nano-TiO2X.H. Hao and Y.Z. Xiao 487

Enhanced Mechanical Performance of Electrospun Graphene/Polyacrylonitrile (PAN)Composite Microfibrous Yarns via Post-ProcessingY.Y. Li, L.J. Guo, B. Wang and Q. Song 492

Influence of Complexing Agent on the Structure and Properties of Electrodeposited Fe–CoAlloy NanowiresL.R. Wang and H.T. Li 499

Chapter 5: Ceramics

Dispersion Stability of Hydroxyapatite-Calcium Phosphate Glass Ceramic-Tertiary ButylAlcohol SystemD.H. Kim, S.Y. Yoon and H.C. Park 505

Microwave Dielectric Properties of Low-Fired Nd2Ti2SiO9 Ceramics with BaCu (B2O5)AdditionG.H. Chen, X.L. Kang and Y. Yang 509

Effects of Cr2O3 Addition on Mechanical and Electrical Properties of Alumina CeramicH. Zhang, Y. Xu, H.Y. Jin and G.J. Qiao 513

Effect of Copper Micro-Scale Excess on the Dielectric Properties of CaCu3Ti4O12 CeramicsPrepared via Tape CastingW. Li, Z.X. Xiong, H. Xue, C.X. Song and H. Qiu 517

Effect of H3BO3 Additive and Forming Pressure on Microwave Dielectric Properties of0.95MgTiO3-0.05CaTiO3J.B. Huang, Y.X. Cai, Z.X. Xiong and H. Xue 521

Sintering Behavior of Lead Oxide Ceramic Prepared by Microwave SinteringY. Ma, S.Y. Zhang, Y.Z. Xu and C.L. Lu 525

Research and Transformation of Rotary Surface Discharge Machining Equipment ofEngineering CeramicL.X. Zhang 529

Effect of Tb4O7 Doping on Wear Resistance of High-Alumina CeramicC. Hu and B.L. Wu 534

Low-Temperature-Tunnel of High-Alumina Ceramics with Good Wear ResistanceJ.C. Liu and B.L. Wu 538

Preparation of the System of MgO-CaO-SiO2-Al2O3-Y2O3 Wear-Resistant AluminaCeramicsY. Xiong and B.L. Wu 542

Study of Nonlinear Current-Voltage Characteristic of Semiconductor Ceramic by theMethod of Tilted Energy BandC. Fang and L.Y. Chen 547

The Ways to the Main Problems in the Application of Low Temperature Co-Fired CeramicsTechnology (LTCC)X.D. Liu, S.H. Wang, Z.X. Hou, D. Zhou, L.Q. Yang and W.W. Hu 551

Advanced Materials Research Vols. 941-944 e

Study on the Crystal Bonding Mechanism of Al2O3–ZrO2 Ceramic CompositeX.L. Tian, Q.H. Xue and C.B. Xue 555

Effect of Calcite Content on Firing Characteristics and its Sintering Properties of NixingPotteryX.L. Zeng, S.Q. Lu, J.M. Zeng, Z.L. Hu and D.G. Cao 560

Analysis of Pop-In Phenomenon in the Process of Ceramic Materials InstrumentedIndentationJ.L. Wang, D.J. Ma, W. Chen, Y. Huang and L. Sun 564

Chapter 6: Optical/Electronic/Magnetic Materials and Technologies

A Life Prediction Model for LEDs Lamps Based on the Thermal Life TheoryD.Z. Huang, J.H. Wu, G.Y. Xu, F. Ruan, X.B. Zhao and G.H. Wang 571

Characteristics Research of Gallium Arsenide Solar Cells under Femtosecond LaserIlluminationS. Xiao, Y.T. Gao, X.Q. Tian and J. He 575

Research on the Mechanism and Model of Contact ResistanceH. Zhou, Q. Ji and P. Jiang 580

Test Systems for Life of LED Light Based on Junction TemperatureD.Z. Huang, J.H. Wu, G.Y. Xu, F. Ruan, X.B. Zhao and G.H. Wang 584

The Modification of Anatase TiO2 (001) Surface by N or S Atom: A DFT InvestigationZ.B. Li and X. Wang 588

Effect of Temperature on LiMn2O4 Prepared by Molten-Salt Combustion SynthesisB. Li, M.W. Xiang, Z.F. Zhang, J.J. Huang, H.L. Bai, G.Y. Liu and J.M. Guo 593

Electrochemical Title Performance of LiMn2O4 Synthesized by Flameless SolutionCombustion with Acetate SystemL. Zhong, M.W. Xiang, B. Li, Z.F. Zhang, C.W. Su, H.L. Bai and J.M. Guo 598

Carrier Injection in High Gain GaAs Photoconductive Semiconductor SwitchesL. Zheng and H. Liu 602

Modeling of the Stress-Dependent Hysteretic Dynamics of Ferroelectric MaterialsW.F. Chen, L.X. Wang and F.Z. Lv 606

Synthesis, Characterization and Photophysical Properties of a New CuI Complexe ContainBis[2-(diphenylphosphino)phenyl] ether and 7,10-Dimethyl Pyrazino [2,3-f][1,10]phenanthrolineQ. Li, Z. Xiong, R. Zhong and F. Zhao 610

Research on Bonded NdFeB Arc-MagnetsW.Z. Qin and J. He 614

Electron Avalanche Domains in High Gain Semi-Insulating GaAs PhotoconductiveSemiconductor SwitchesH. Liu, L. Zheng, W. Yang, X.L. Zhu, S.H. Dai, D. Wu and H.L. Li 619

Manufacture Technology for Large Lightweight Optical MaterialsY. Chen 623

A PbS/ITO/Glass Based Photoelectrochemical Cell with a Sponge-Like Surface StructureZ.F. Yin, P. Wang, L.B. Fan, Z.F. Chen and S.L. Xu 627

Photoionization in GaAs Photoconductive Semiconductor SwitchesH. Liu, L. Zheng, W. Yang, X.Q. Wang, S.H. Dai, X.L. Zhu, H.J. Yang and D. Wu 631

Research and Implementation on Methods of Evaluating Lifetime of LED Light Source forLED Lighting SystemR. Wang, H.B. Ma and B. Qu 635

Synthesis of a Novel Donor Unit for Organic Light-Emitting Materials: 10-octyl-3,7-Di(thiophen-2-yl)-10H-phenothiazineX.X. Sun, Z.B. Tang, H.W. Yan and L.P. Miao 640

Chapter 6: Optical/Electronic/Magnetic Materials and Technologies

The Luminescence Properties of Ca3(BO3)2 Doped with Ce3+, Tb3+

H.H. Lin, Y.R. Lin and G.P. Fang 647

f Materials and Processes Technologies V

Technological Development of 6.5wt%Si Electrical Steel ProductionS. Ji, J.T. Han, J. Liu and T. Wu 653

Influence of Nd-Doping on Electronic Structure and Optical Properties of ZnOL.L. Chen, H.D. Hu and Z.H. Xiong 658

Optical Properties of 5,5'-(9,9-dioctyl-9H-fluorene-2,7-diyl)Bis(thiophene-2-carbal dehyde):A Novel Organic Light Emitting MaterialZ.B. Tang, X.X. Sun, H.W. Yan and L.P. Miao 662

Fabrication and Lead Ion Removal Property of Magnetic Hydroxyapatite Composite withHierarchically Urchin-like MicrostructureR.X. Sun, J. Long, Z.Z. Sun, C.Q. Li, L.S. Wang, H.X. Zhang and K.Z. Chen 666

Study on Microwave Absorbing of Tourmaline and Dravite/ZnO Complex PowdersX.H. Zhang and H.W. Ma 672

Modelisation of Permeability as a Function of Induction and Temperature by the Brillouin’sFunction for the Formalization of the Magnetothermal ProblemB. Merouane and M. Sebbani 677

Chapter 7: Building and Construction Research

Comparison Study on Road Performance of Modified Asphalt Mixture for IntermediateCourseZ.H. Sun, G.Q. Zhu, J. Ma, Q.B. Yu, B.Y. Yu and T.B. Wang 687

Establishment and Research on the Rebound Curve to Detect Pump Concrete CompressionStrength with ResiliometerX. Li, L. Zhang, X.M. Shen and S.S. Peng 691

Finite Element Analysis of Dynamic Splitting Tensile Mechanical Properties of ReinforcedConcreteX.Y. Song and P.W. Zhang 695

Flush Rule and Initial Flush Analysis of Cement Concrete PavementC. Zhang, B.F. Li and Y.H. Jiang 701

Mechanism Analysis on Concrete Column’s Recovery StrengtheningZ.P. Lai and S.H. Guo 707

Study of Bond Behavior between Concrete and Steel Bars Based on New Beam SpecimensH.W. Lin and Y.X. Zhao 712

Study of Model Tests on Large-Span Tunnel’s Damage Caused by Overload with ArchCover MethodZ.Q. Ji and Y.G. Jia 717

Study on Moment-Curvature Hysteretic Model of Steel-Concrete Composite Box BeamC.B. Jiao, L.Z. Jiang and Z. Huang 723

Resistance of Polymer Dispersion Additive Modified Concrete to Light Liquids ActionM. Gruszczyński 730

Analysis on Bearing Capacity of Retaining Wall with AnchorJ.Q. Wu, Y.Y. Li, H.B. Zhang, X.G. Song and C. Li 734

Experimental Study on the Mechanical Properties of the Crumb Rubber Concrete Modifiedby LatexW. Li, Z. Huang, X.C. Wang and J.P. Zhang 739

The Introduction of Micro-Pile in Building Heightening and TransformationS.J. Zhang 743

A Study on the Snowdrift Patterns of Gable and Flat Roofs Using a Wind TunnelK.P. You, Y.M. Kim, J.Y. You and S.Y. Paek 747

Effect of Co-Doped Steelmaking Slag and Fly Ash on Performance of Permeable ConcreteZ.C. Li, A.J. Zhang, M.J. Zhou and S.H. Qiu 751

Experimental Research on Shear of Interface between New and Old Concrete with Bond-InReinforcement and Practical CalculationL. Li and Z.L. Wang 756

Experimental Study on Ratio of Bending-Compressive Strength of the Crumb RubberConcrete Modified by LatexW. Li, Z. Huang, X.C. Wang and Z.S. Zang 761

Advanced Materials Research Vols. 941-944 g

Nonlinear Analysis of Concrete-Filled Steel Tubular Columns under Blast LoadingX.Y. Cao, Y. Li and J.H. Zhao 765

Study on the Ultimate Bearing Capacity of Concrete Filled Steel Square Tubular ShortColumn with PBLY. Ling, W.Y. Feng, J.H. Zhao and Y. Li 770

A Study on Influence of Shape of Aggregate on Strength and Quality of Concrete forBuildings and PavementsK. Molugaram, J.S. Shanker and A. Ramesh 776

Influence of Superplasticizer S-3 on the Technological Properties of Concrete MixturesY.G. Barabanshchikov and M.V. Komarinskiy 780

Tests Results Strength and Thermophysical Properties of Aerated Concrete Block WallSamples with the Use of Polyurethane AdhesiveG.I. Grinfeld, A.S. Gorshkov and N.I. Vatin 786

Applicability Study of Peck Formula Applied to Shield Tunneling in the Loess AreaR.D. Liu, J.G. Zheng and Z.Y. Li 800

Bearing Performance Test Research of Shallow Arch Circular Concrete Filled Steel TubeSupportJ. Wang and Y.F. Gao 804

Current Status and Development Trend of Assembled Structure in Cold RegionsY.B. Wang and H.T. Liu 809

The Energy Efficiency of Residential Buildings with Light WallingD.V. Petrosova and D.V. Petrosov 814

Highly Filled Building Materials Reduced FlammabilityB.M. Gerasimovich and G.L. Stanislavovna 821

Modern Building Materials and the Concept of "Sustainability Project"Z.A. Gayevskaya and X.M. Rakova 825

Research on the Influence of Fiber Web to the Axial Compression Performance of EPSComposite Insulation WallboardQ.H. Wang, Y. Feng and R.H. Wang 831

Restrained Shrinkage Behavior of Concrete under Different Environmental ConditionsZ.T. Chen, M.G. Li, Y.Z. Yang and Q. Liu 835

Risk Evaluation of the Subway Foundation Pit Based on Variable-Weight and Matter-Element TheoryY.H. Wang, H.Z. Zhai, T.M. Zeng and L.M. Zhang 842

The Implementation of Waste Sawdust in ConcreteJ. Hu 849

Electrochemical Behaviors of Q420 Hot Galvanized Plate in Simulated Concrete PoreSolutionQ.L. Sun and Z.R. Liu 854

Modernization of Residential Buildings of the 1960sE.V. Vostrikova and Z.A. Gayevskaya 858

Shear Strengthening Effects of RC Beams Using Aramid Plate StripS.J. Yoon, S.W. Ho, C.S. Kim and O.S. Gweon 864

The Quickly Erected Buildings in Modern ConstructionO.N. Beskorovainaia and D.S. Bychkov 868

Compound and Engineering Application of Fiber Reinforced Concrete with Low ShrinkageJ.F. Li and S.J. Li 873

The Research of Concrete Short Columns Strengthed with Angle SteelF. Zhang, S. Bai and J.F. Hao 877

Microstructure and Mechanical Properties of Laminated Mg-Based CompositesG.J. Xue, S.R. Wang, P. Li, Y. Qiao and Y. Han 883

The Engineering Application of Carbon Fiber Reinforced Concrete BeamY.L. Zhao, X.S. Xu and G.M. Wang 887

Modeling of Reliability for Anti-Condensation Wall System in Underground EngineeringBased on Markov ProcessB. Zhang and Z.Q. Cheng 891

h Materials and Processes Technologies V

The "Comfort in all Respects" Principle Implementation by the Example of an ElementarySchoolN.S. Bolshakov, S.A. Krivoy and X.M. Rakova 895

Character and Development Analysis of Foam Concrete Cooperating Rice Husk AshC.C. Yu, D.L. Wang, K. Yang and S.L. Li 901

The Energy-Efficient Heat Insulation Thickness for Systems of Hinged Ventilated FacadesN.I. Vatin, A.S. Gorshkov, D.V. Nemova, A.A. Staritcyna and D.S. Tarasova 905

Shield Tunneling Parameters Optimization Based on Dynamic Bayesian NetworksT.M. Zeng, B.J. Ding, Y.H. Wang and L.M. Zhang 921

The Historical Characteristics and New Developments of Settling Spaces on BridgesC.X. Yang 928

Chapter 8: Environment-Friendly Materials

Effect of Formamide on the Mechanical Properties of Thermoplastic Protein FilmsY.J. Chen, X. Liu, W.B. Li, J.C. Sun and K.Y. Sui 935

Mechanistic Study on Adsorption and Oxidation of NO over Activated CarbonB. Li, J.M. Xue, C.Y. Ma and J.M. Chen 939

Study on Metal Chelation Adsorption of NO Using Fe(II)EDTA Solution in Power PlantY. Bai, J.M. Xue and Z.H. Li 945

Impact of Biochar on Water Holding Capacity of Two Chinese Agricultural SoilD.Y. Wang, D.H. Yan, X.S. Song and H. Wang 952

Application Research of Slow-Release Fertilizer in Plant CamouflageN.Y. Zhang, X.Q. Li and L.Y. Qu 956

Study on CO2 Adsorption of Sepiolite Modified by Silane CouplingH.L. Zhang, H.J. Wu, Z.Q. Pan and S.H. Jiang 960

The Full Immersion Test Research of Refractory Weathering SteelM.Y. Chen, Y.J. Zhang, J.T. Han and D.M. Yao 965

Hydraulic Performance of Olive Stone Filtration SystemsM. Carbone, G. Garofalo, G. Nigro and P. Piro 970

Organobentonites for Controlled Release of DiazinonY.P. Qin, L.T. Dai, Z.J. Kong, Y.J. Wang, A.M. Huang and L. Ma 975

Study on the Storage Stability of High Neutralization Degree Phosphate-Bonded No-BakeSandL. Xia, W. Long, Y.S. Zhang, J. Huang and B.S. Hu 981

Chapter 9: Biomaterials and Bioresearch

A Comparison Study of the Effects of Ultrasonication on the Gelation Behavior between theSilk Fibroin of Domestic and Wild SilkwormsY. Zhou 989

Determination of Luteolin by Fluorescence SpectrometryW. Huang, F. Wang and H.L. Zhu 994

Dynamic Models of Cell Growth and its β-Carotene Synthesis from the Red Yeast MutantS.L. Wang, W. Liu and H.X. Wang 998

Extraction Technology and Determination of Total Flavonoid in Magnolia Liliiflora PetalsY.H. Jiang, X.L. Jiang and C.G. Cai 1003

Fractal Modeling Research in Permeability of Camellia and Bancoul Nut Cakes underCold-PressX.C. Ren, X. Zheng, G. Chen and Z.X. Sun 1008

Improving the Yields of Carotene from Red Yeast by Using Ultra High Pressure and itsMutagenic MechanismS.L. Wang, H.X. Wang and Z.P. Yang 1016

Synthesis of Tung Oil MonoglycerideJ. Yang, W.J. Ma, N. Li, J.H. Zhou and H.Z. Sun 1021

Analysis of Key Odor Compounds in Steamed Chinese Mitten Crab (Eriocheir sinensis)S.Q. Gu, N. Wu, X.C. Wang, J.J. Zhang and S.R. Ji 1026

Advanced Materials Research Vols. 941-944 i

Chemical Constituents Study of Weixian Turnip (Raphanus sativus L.)G.F. Li, L.G. Deng, H. Zhang, P.J. Zhao, H. Wang, Q. Li and B. Ma 1036

Comparison of Volatile Compounds in Raw and Cooked Chinese Mitten CrabHepatopancreas and GonadsX.C. Gao, S.Q. Gu, X.C. Wang, N.P. Tao, J. Zhuang, M.Y. Liu, Y.C. Xie and R. Wu 1040

Effect of Cold-Induced on Quality of Black Carp Fillet Stored at Controlled Freezing-PointL. Zou, J.Q. Wan, Y.G. Zhong, J. Li and Y.F. Zhao 1045

Microstructure Analysis of Xanthoceras Sorbifolia Shell Activated CarbonH.Z. Zhu and Z.H. Xue 1051

Optimization of Microwave Pretreatment without a Reagent of Pineapple PeelP. Pongsuwan and S. Chongkhong 1056

Optimizing Clarification of Pineapple PeelU. Tengrang and S. Chongkhong 1060

Preparation and Evaluation of Calcium Alginate / Glycyrrhizic Acid HydrogelY.Z. Ren, Y. Zhang, L.N. Gao, Y.L. Cui and Y. Qi 1065

Preparation of Antioxidant Hydrolysates from Round Scad (Decapterus maruadsi) Proteinby Composite Enzymatic HydrolysisX.Q. Yang, T.T. Wang, X. Hu, L.H. Li, Y.Y. Wu and Y. Wei 1069

Purification of Enzymatically Produced Trehalose by Saccharomyces cerevisiae StrainsCarrying Compound UV- and NTG-Induced MutationsC.H. Piao, Y. Wang, J.M. Liu, H.S. Yu and Y.H. Wang 1075

The Establish of Four Kinds of Chinese Primary Economic Crab Species Fatty AcidFingerprintsX.Y. Lu, Q. Qiu and S.S. Chen 1083

Effects of Water Temperature on Biochemical Characteristics of Mandarin Fish duringLive TransportationS.K. Cheng, S.S. Chen, L.J. Wang and S.L. Huang 1092

The Effect of Modified Atmosphere Packaging on the Quality of Sturgeon Caviar at 0°CD. He, L.H. Li, W.J. Zhou, Y. Wei, H. Huang, W.L. Lin and S.X. Hao 1099

Characteristic Changes of Protein Occurring in Brine Salting Sturgeon at Different Levelsof NaClX.Y. Li, S.X. Hao, L.H. Li and X.Q. Yang 1106

Comparative Analysis of Amino Acid Composition in Antarctic Krill and White ShrimpW.J. Li, S.S. Chen and W.Q. Qiu 1114

Component Analysis, Quality Measurement and Antioxidant Activity of Sambucuswilliamsii Seed OilH. Lv, S.S. Chen, P. Han, W.Y. Luo, L. Dong and K.H. Liu 1120

Dicamba Degradation Using O3/UV Process in Aqueous SolutionL. Chen 1124

Physicochemical and Rheological Properties of Gelatin Extracted from Tilapia(Oreochromis niloticus) Skin and Concentration EffectY. Bai, S. Peng, Y.Q. Huang and K.Q. Lai 1128

Physicochemical Properties of Biodegradable Tilapia Skin Gelatin Film and Gelatin-Polysaccharide Based Composite FilmsS. Peng, L.H. Niu, K.Q. Lai and Y.Q. Huang 1133

Plant MicroRNAs Responsive to Fungal InfectionH.L. Zhang, L. Chen, W.N. Li, L.L. Wang and H.Y. Xie 1141

Shortening Fermentation Period of Fermented Sausage by Adding Exogenous EnzymesE.Q. Liu, Y.H. Wu, J.P. Zhang, Y. Li and H. Song 1146

Study on Defluorination Effect of Antarctic Krill by Chemical TreatmentsX.N. Liu and S.S. Chen 1151

The Expression Analysis of WUSCHEL Gene under High and Low Temperature in TomatoSeedlingQ.B. Zhang, Y. Liu, H. Li and T.L. Li 1157

The Expression Analysis of the YABBY Transcript Factor-SlYABBY2a in the TomatoSeedling under Low LightQ.B. Zhang, Y. Liu, H. Li and T.L. Li 1163

Towards Enhanced Bioactivity: Calcium Ion-Doped PolypyrroleY. He, L.F. Dai, S.H. Wang, Y.N. Sun, W. Shi and D.T. Ge 1168

j Materials and Processes Technologies V

Vacuum Assisted Extraction of Indirubin from Radix isatidis through Orthogonal TestMethodY.Q. Wang, Z.F. Wu, J.P. Lan and M. Yang 1174

A Bioaerosol Detection IRLidarH. Yang, X.S. Zhao and J.J. Zong 1178

Effects of Different Purification Methods on Chicken Feather KeratinF. Pourjavaheri, F. Mohaddes, R.A. Shanks, M. Czajka and A. Gupta 1184

Effect of Different Temperatures on Storage Quality of Fresh-Cut ApplesQ. Li, C.Z. Leng, S.X. Wang, X.H. Li, L. Chen, Y.Y. Li, H.H. Chen, X.H. Huang and M.M. Hao 1188

Finite Element Analysis of Femoral Fracture SystemY.L. Gao, L.M. Dong and W. Chen 1192

Influence of Operating Parameters on Physicochemical Properties of Fruit Juice PowdersProduced by Spray DryingL.L. Zhang and C.C. Ma 1196

Chapter 10: Polymer Materials

A Novel Cement Fluid Loss Additive P1402Q. Xiao, W.F. Xiao and X.X. Liu 1203

A Self-Oscillating Polymer Chain with High LCSTY. Hara 1208

Activation Energy of Autonomous Polymer Chains with High LCSTY. Hara 1212

Preparation and Drug Release Behavior of IPN Hydrogel of Polyethylene Glycol andOctane Succinyl ChitosanF.N. Tan, Y.Y. He and W.P. Sui 1216

The Optimization Plastic Coefficient in AWC Research and ApplicationF.C. Yin, G.S. Ma, J.X. Yu, Y.F. Ji, B. Wang and D.H. Zhang 1221

Effect of Relative Humidity on the Morphology of Electrospun Gelatin Aqueous SolutionsW.W. Li and X.H. Qin 1225

Melting, Crystallization Behaviors and Mechanical Properties of iPP Nucleated by βNucleation MasterbatchesG.R. Dou and Q. Dou 1229

Rheological Properties of all Para-Position Polysulfonamide Spinning SolutionsH.M. Li and J.X. Zhao 1233

Simulation of the Flow-Induced Crystallization of Polypropylene Based on MolecularKinetic ModelY. Rong, L. Shi, H.P. He and L. Zhang 1237

Study on Resin Infusion Behavior of the CFRP Integrated Manufacturing Process Based onRFI ProcessY.Q. Guo, Z. Meng, M.H. Sun, F.Z. Li and W. Chen 1243

A Novel Synthesis Process of PPTA by Nitrogen Cooling for Reaction Heat RemovalH.B. Li, W.Y. Shi and Y.F. Zhang 1249

Crystallization Behavior and Crystal Morphology of PP/POEg BlendsK.Y. Wang 1253

The Kinematic Research in the Manufacture of Rigid Polyurethane Rubber Micro-VGroovesB. Wu, Z.L. Yang, M.T. Yang, Y.B. Wu and G.T. Shen 1257

Influence of Solvent Content on Properties of UHMWPA6 Fibers Prepared by Gel-SpinningMethodH.M. Zhang, L. Zhang and Q.X. Jia 1264

Chapter 11: Film Materials

Fabrication of Self-Organized Porous Anodic Alumina Film in Malonic AcidD. Ma, S.B. Li, L.G. Xu, X.Y. Dong and X.Y. Hu 1271

Advanced Materials Research Vols. 941-944 k

Effects of Thickness on Resistance Switching Properties of ZnMn2O4 Films Deposited byMagnetron SputteringH. Wang, Z.D. Li, J.W. Xu, Y.P. Zhang, L. Yang and W. Qiu 1275

Investigation of Phase Transformation and Optical Properties of TiO2 Thin Films Depositedby Electron Beam EvaporationL.H. Xu, G.G. Zheng, Y.L. Chen and J. Su 1279

Reaction Mechanism of Atomic Layer Deposition of Al on the Si (100) Surface: A DensityFunctional Theory StudyM.J. Dong, R. Fang, Y.Q. Xiong, D.S. Wang, J.Z. Wang, C. Li and L. Zhang 1283

Effect of Al-Induced Crystallization on Structure of CdZnTe Thin Films Deposited byRadio Frequency Magnetron SputteringD.M. Zeng, Y.Y. Mu, W. Liu, H. Zhou and F. Chen 1288

Influence of Sputtering Power on the Properties of CdS Thin Films Deposited byMagnetron SputteringW. Liu, D.M. Zeng, H. Gao, Y.Y. Mu, Y. Zeng and W.G. Liu 1293

Recent Progress in Gasochromics of Nano-Structured WO3 Film and its ApplicationsM.H. Wang, H. Lei, Y. Sawada, Y. Hoshi, T. Uchida and Z.X. Hou 1298

Structural and Optical Properties of (Al, Co) Codoped-ZnO Thin FilmP. Cao, Y. Bai and Z. Qu 1302

Study of the Capacitive Properties of Strontium Barium Niobate Deposited by RadioFrequency Magnetron SputteringS.C. Su, W.C. Chang and C.C. Wu 1306

Chapter 12: Textile Materials and Technologies

Eco-Friendly Dyeing of Silk Fabric with Sodium Copper ChlorophyllJ. Zhang and R. Tao 1313

Fabrication of Twisted Continuous Nanofiber/Cotton Hybrid YarnsG.J. Jiang, W.M. Zhao and X.H. Qin 1317

The Exploration of Nickel Iron Fiber Absorbing FabricQ. Li, S.N. Wei and J.M. Yao 1321

Chapter 12: Textile Materials and Technologies

Analysis on down Coat FabricY.J. Zhang, C.L. Wang, H. Xu, M. Zhang and H.S. Han 1327

Design Principle and Method of Digital Multicolored Warp Jacquard FabricJ. Zhou, L.N. Duan and B.F. Luo 1331

Parameters of High-Density Soft Breathable and Anti-Velvet Fabric TechnologyH.S. Han, Y.J. Zhang, D. Sun, L.P. Qiao and M. Zhang 1336

Research on the Ballistic Performance of UD Cloth/3D Fabric Composite TargetH.W. Yang, H. Gao, J.H. Du and S.L. Xu 1341

Testing of the Dynamic Permeability and Deformation of Airbag FabricsX.Y. Gao and P. Zhang 1345

Comparative Study between DSC and Two Complementary Performance EvaluationMethods for PCM-Treated TextilesF. Mohaddes, S. Islam, R.A. Shanks, L.J. Wang and R. Padhye 1350

Chapter 13: Corrosion and Surface Treatment Technology

The Effect of Wear and Corrosion Resistance of Austenitic Stainless Steel on PlasmaCarburizingT. Zhang and X.S. Tong 1357

Study of EMISE Ionic Liquids Inhibitor on the Corrosion Behavior of Steel Rebar byStatistical Methods in Alkaline Chloride SolutionX. Zhou, G.X. Wu and R. Chen 1362

l Materials and Processes Technologies V

Multiple Regression Corrosion Models and Corrosion Mechanism of High Chromium CastIron under Phosphoric Acid Medium ConditionL.J. Xu, B.Y. Li, A.H. Si and S.Z. Wei 1367

Application of Visual Basic (VB) Language on Stress Corrosion Cracking Test of MaterialsQ.L. Sun, Z.R. Liu and L. Yang 1372

Oxidation-Resistance of (Ti,Al,Nb)N Coatings Prepared by Arc Ion PlatingM.S. Li, L. Wang, S.J. Zhang and L.G. Luo 1376

Interaction Concrete with Acidic FluidsS.A. Starsev, D.M. Shlychkova, O.A. Petrochenko and J.A. Ibraeva 1380

Application of Origin in Material Corrosion ExperimentQ.L. Sun, Z.R. Liu, H. Rao, Q. Qiao and Y.P. Sun 1386

Effect of New Corrosion Inhibitor on Electrochemical Behavior of Prestressed Steel Wire inSimulated Concrete Pore SolutionQ.L. Sun, Z.R. Liu, Y.Z. Guo and F. Liu 1390

Impact of Local Concrete Crack on the Prestressed Steel Stress Corrosion CrackingQ.L. Sun, Z.R. Liu and C.Q. Liu 1394

Industrial Application of Pb–Ag–Ca Anode with Surface Passivation for ZincElectrowinningJ. Huang, Y.F. Ding, X.D. Su, Y. Li, Y.S. Xiong, D.S. Long and Z.H. Wu 1398

Investigation on Electrochemistry Behavior of Fe-Cr-Ni Alloy in Caustic SolutionQ.L. Sun, Z.R. Liu, J.L. Liu, C. Fang and Q.N. Zhang 1402

Research on the Nitriding Effect of Ta-10W with Change of Process ParametersX.H. Xiong, J.L. Chen, D.M. Quan and Q.X. Zhang 1406

The Micro-Fabrication of Multidimensional Structure of Silicon by Selection CorrosionJ.J. Gao, Z.L. Zhao, R.R. Liu, W.J. Wang and M. Tang 1410

Process Design of Strengthening and Toughening Treatment for 65Mn Steel by Powder RE-Boronizing Method under Low TemperatureX.M. Yuan, H.Y. Wang, Y.F. Zhao, X.J. Xu and M. Cheng 1414

Chapter 14: Materials Mechanical Behavior and Fracture

Analysis on Fracture Mechanism of T92 Steel under High Temperature Multiaxial CreepH. Xu, J. Yuan, J. Liu, S.D. Huang, C. Li, X. Wang, Y. Yu and X.P. Mao 1423

Ballistic Resistance of AA5083-H116 Aluminum Plates against Conical-Nose SteelProjectiles ImpactW.H. Sun, G.L. Ju, B.Q. Yang, L.J. Wang and J.W. Pan 1428

Piston Contact Stress Analysis and SimulationF. Jiang 1432

The Damage Analysis of Composite Laminate under the Action of Low Speed Impact andStatic Pressure MarkR.X. Ou, H.B. Chen, J. Bao and J. Wu 1437

Development and Change of Compressive Strength for Class G Oil Well Cement underHigh TemperatureJ.F. Zhang, K. Liu, R.X. Hou, B. Wang and J.L. Yang 1441

Method for Determining the Plastic Properties of Metallic Materials by InstrumentedIndentation with Dual Pyramidal IndentersW. Chen, D.J. Ma, J.L. Wang and Y. Huang 1445

Study on Flow Mechanism of Gas Injection in Porous Carbonate CoreH. Liu, P. Qu and Y. Liu 1453

Effect of True Strain on Processing Maps for Processed Ni-Based Superalloy below γ΄-Transus TemperatureG.B. Yang, Z.K. Yao, Y.H. Liu, Y. Nan and Y.Q. Ning 1459

Effect of Strain on Microstructures and Mechanical Properties of Warmly DeformedSCRAM Steel for Fusion ApplicationY. Mou, L.H. Xue, Q.L. Zhou, C.X. Lu and Y.W. Yan 1463

Influence of Carbon on Mechanical Behavior of Fe-Mn-C System AlloysY.J. Dai and Z.L. Mi 1469

Advanced Materials Research Vols. 941-944 m

Multiscale Simulation of Crack Propagation Based on Molecular DynamicsG.X. Bian, Y.L. Chen, Y. Zhang and D.Z. Yu 1473

Numerical Simulation Study on High-Cycle Fatigue Damage for MetalsX.T. Nie, W.H. Chen and Y.X. Wang 1477

Evaluation of Mechanical Properties of Hastelloy C-276 Weld by Small Punch TestY. Ma, Y.Z. Xu, S.Y. Zhang and C.L. Lu 1483

Constitutive Modeling for Superplastic Flow Behavior of H62 AlloyZ.P. Guan, H.J. Jia, M.W. Ren and D.L. Wei 1488

Correlation Degree Analysis on Temperature and Operating Pressure to Stress CorrosionCracking SusceptibilityR.J. Sui, S.Y. Chen, C. Zhou, H.B. Liu and Y.H. Chu 1492

Experimental Study on Shot Peening to Improve Diaphragm Spring Fatigue Life ofAutomobile ClutchH.H. Xu, Y.C. Ye and G.F. Li 1497

Prediction of Flow Stress for Superplastic Tension DeformationZ.P. Guan, M.W. Ren, P.K. Ma and P. Zhao 1501

Quantitative Analysis of Instability for Superplastic TensionZ.P. Guan, M.W. Ren, P.K. Ma and P. Zhao 1505

Theoretical Deduction of Constitutive Equations with Variational Parameters duringSuperplastic TensionZ.P. Guan, X.F. Guan and Y.Q. Song 1509

Influence of Grain Size and Lamellar Spacing on the Fatigue Crack Propagation in γ-TiAlAlloyY.R. Zuo, Z.Y. Rui, R.C. Feng, C.F. Yan and H.Y. Li 1513

Study on the Microstructure and Fracture Mechanism of Stable β Phase Containing TialAlloyX.B. Yi, Z.Y. Rui, R.C. Feng and Y.R. Zuo 1517

The Fatigue Behavior of Carbon Fiber-Reinforced Composite T300/Epoxy under Tension-Tension and Bending Fatigue LoadingY.P. Feng, H.J. Tang, C.G. Li, X.M. Ma and M.L. Xie 1522

Research on the Relationships between Plastic Viscosity of Picking Liquids and its TackValueW. An, Y.G. Yang and Y. Zhao 1528

Texture Evolution of Commercially Pure Copper during Ultra-Thin Strip RollingM. Song, X.H. Liu and D.L. Tang 1532

Regularity of Decreasing Strength Limit at the Time of Concrete's Freeze-Thaw CyclingO. Pertseva and S. Nikolskiy 1537

The Preparation and Tribological Properties of Graphite FluorideY.T. Yan, R. Wang and W.L. Song 1544

Nonlinear Model and Numerical Solutions of Large Deformation of Functionally GradedConical ShellJ.H. Zhang and S. Chen 1548

Calculating Fatigue Life of Helicopter Composite Blades Based on the Residual StrengthTheoryW. Wang, Y.L. Zhu and Q.M. Xiao 1552

Aircraft Composite Structures Fatigue Durability Test MethodY.L. Chen, Y.L. Lei and Y. Zhang 1558

The Preparation and Performance Study of Thermal Insulating Materials with DiatomiteJ. Da, Y.H. Du, M.D. Li and C.B. Zhang 1562

Mechanical Response of Ping-Pong Racket to Different Hyperelastic Surface MaterialsH. Wang and G.Y. Wang 1566

Research on Grind-Hardening Process through Integration of Physical Experiments andDynamic SimulationZ.T. Han, G. Yang and H.B. Luo 1570

Chapter 15: Surface Engineering / Coatings Technology

n Materials and Processes Technologies V

Hydrophobic Coating on Silicon Wafer by Use of Industrial Coating-Bar Process inAtmosphere ParameterC.L. Hsu, S. Jou, Y.J. Chuang and C.Y. Lin 1577

Slip Length Measurement of Water Flow on Graphite Surface Using Atomic ForceMicroscopeD.Y. Li, D.L. Jing, Y.L. Pan, K. Ahmad and X.Z. Zhao 1581

The Influences of Additives and Heat Treatment on the Properties of Electroless Plating Ni-W-Mo-P Alloy on the AluminumZ.X. Yu, D.T. Zheng, H. Guo, Y. Liu, Y.L. Luo and C. Deng 1585

Research and Development on the Antiaging Polymer CoatingsL.P. Liu and X.F. Cao 1589

Preparation and Characterization Composite Ceramic Coating Doped with ZrO2 Particleson TC4 by MAOY.S. Zhong, L.P. Shi, M.W. Li, J. Yu, J.H. Liang, M.B. Sun and X.D. He 1593

Preparation and Characterization of Al(OH)3 Coated CaF2 Composite PowderM. Li, C.H. Xu, Z.Q. Chen, G.C. Xiao and G.C. Chu 1597

Preparation of Pd Composite Membrane and its Surface Morphological Changes afterElevating Temperature in Different AtmoshphereY. Guo, Y.J. Jin, H.M. Wu, D.X. Li, L.D. Zhou, Q.Q. Chen and X.F. Zhang 1602

Research on the Microstructure and Properties of Coating on Galvannealed High StrengthIF SteelC. Wang, H.X. Teng and Y.L. Kang 1606

Preparation of PAI Composite Coatings and its Tribological BehaviorsR.M. Sun, H. Zhao and Y.H. Zhou 1612

New Technology of Electroless Silver Plating on Fly Ash Cenospheres with Thermo-Alkaline ActivationY.M. Li and X. Huo 1616

Preparation of Superhydrophobic Surfaces with Different Degrees of OleophobicityD.L. Jing, D.Y. Li and X.Z. Zhao 1621

Progress in Thermal Barrier Coatings for Gas Turbine EnginesH.X. Wang, W.F. Zhang and T.J. Liu 1625

FE Modeling of Stress Distribution in MAO Coating on TC4 Substrate under ThermalShock Cyclic LoadingY.S. Zhong, L.P. Shi, M.W. Li, J. Yu, J.H. Liang, M.B. Sun and X.D. He 1629

Investigation of Durability T = f (vc) in Turning of the AISI 304 Austenitic Stainless SteelUsing the CNMG 120408 Coated Carbide InsertR. Dubovská, J. Majerik and H. Chochlikova 1633

Research on Wear Characteristics of CVD Composite Coated Tool in Natural MarbleCuttingD.H. Zhao, G.Y. Yan and Q. Wu 1644

Densification Behavior and Microstructure Evolution of Laser Surface Melting ProcessedSilicon-Containing Micro Arc Oxidation CoatingJ. Yu, S.C. Di, Y. Wang, P.X. Lv and J.J. Yang 1650

Influence of Additive on Morphology and Nucleation Mechanism for Zn-ElectrodepositionD.B. Huang, Y.Q. Tu, J. Cai, G.W. Feng and X.P. Guo 1654

Preparation and Antimicrobial Properties of Surface Antibacterial Layer of AluminumY.M. Zhang, Y. Hu, G.Q. Wang, Y. Gui, D.F. Wang, J.Q. Huang and X.H. Jie 1659

Chapter 16: Forming Technologies

Effect of Drawing Processes on Wire Breaking in Steel Wire ProductionY.L. Xu 1667

Effects of Parameters on Fine Blanking of Steel Synchronizer Ring TeethM. Zhang, L. Hua, Y.L. Song, H.J. Mao and Y.X. Liu 1671

Runner Balance Design of Soap Box Compounding Cavity Based on MoldflowH.B. Wang, Z.R. Li, C.H. Sun and Y.P. Zhang 1678

Study on Deformation Law of Drum-Shaped Blank and Collapse Defect in Rolling ProcessL.G. Wang, D.Z. Kong, J.Y. He and Y. Huang 1682

Advanced Materials Research Vols. 941-944 o

Study on Spring-Back of CU11000 Clad AL1050 SheetsS.F. Liu, F. Xue and S.L. Wu 1688

The Application and Research on Manufacturing Technology of the Heavy ForgingB.C. Ma and X.K. Tian 1692

The Application of Steady-State Thermal Expansion of the Rolls in Thickness Setup Modelfor HSMG.S. Ma, F.C. Yin, X.Y. Zhu, W. Peng, J.Z. Cao, J.G. Ding and D.H. Zhang 1696

The Optimization of Thickness Model Adaption in Hot Strip MillG.S. Ma, F.C. Yin, W. Peng, Y.M. Liu, J.G. Ding and D.H. Zhang 1700

Research on Tension and Correction of Filming Steel Strip on Hydrosol Salivation MachineY.Z. Xiao and X.H. Hao 1704

Experimental Study on Three-Dimensional Flexible Stretch Bending Formability forComplex Cross-Sectional Profiles of TWBY.J. Shen, Q.X. Xia, G.F. Zhong and F. Wu 1710

The Effect of Screw Speed on Extrusion Quality of the Single-Screw ExtruderY.L. Gao, X. Wang and L. Zhou 1715

Numerical and Experimental Investigation on Hot Stamping of Ultra-High Strength SteelH. Xu, M.R. Zhang and L.J. Zhu 1720

Coupled Thermo-Mechanical FEM Simulation of Multi-Pass Vertical-Horizontal RollingProcessH.B. Xu, S.R. Ding and Y.Z. Huo 1726

Development of Environmentally Friendly Binder in Extrusion MoldingX.W. Meng 1735

Effect of Mid-Roll Shift on the Strip Flatness for CVC 6-H MillD.C. Wang, Z.Q. Wang and H.M. Liu 1740

Effect of Steel Strip-Feeding Process on Solidification StructureS. Zhao and L. Zhang 1744

Metal Average Deformation Velocity and Forward Slip Model for Longitudinal ProfiledPlate Rolling ProcessC.F. Wang, L.C. Dong and Y. Wang 1748

Optimization Design of Evaporator Tube Plate Mold Based on PDXZ.Y. Gao, H. Chen, Y.J. Zhang, S.N. Li, H.M. Yu, W. Xu and L.N. Yu 1752

Stress-Strain Analysis of the Sun Shaft in Cross-Wedge-RollingP.B. Han, X.X. He, H.J. Yan, J. Li, Z. Zhang and B.Z. Chen 1757

Study of Isothermal Split-Die Precision Forging Process of High-Strength Aluminum AlloyComplex-Shape ForgingsJ. Lin, F. Kang, C.K. Hu, Q. Chen and Z.D. Zhao 1761

Study of Submacroscopic Melting of Polymer in Single Screw Extrusion - Physical Model ofPolymer Granule MeltingH. He, J.Y. He and Y. Liu 1769

Study on the Influence of Thickness and Width on the Post-Buckling Deformation of Cold-Rolled StripD.C. Wang, X.F. Zhou and H.M. Liu 1773

Technique of Extrusion Die Tolerance Analysis Based on CATY.L. Gao, Z. Li and X. Wang 1777

The Influences on Microstructure and Segregation of the Jumbo Slab Ingot by DifferentCooling SpeedN. Lv, Y.L. Jin, S.L. Li and X.G. Ai 1782

On-Line Measurement of Rheological Properties of LDPE, HDPE and LDPE/MICASystems in Single-Screw ExtrusionH. He and J.G. Zhou 1788

Study on Convergence, Calculation Speed and Precision of Flatness Analysis Method forCold Rolling StripD.C. Wang, Z.Q. Zhang and H.M. Liu 1792

Causes and Remedies for some Physical Defects in Rotary Swaged ProductsQ.L. Hao, J.T. Han, J.J. Song and S. Ji 1797

Experimental Investigation on Rotary Punching by the Compression of Polyurethane PadQ. Liu, J.T. Han, J. Liu and X.X. Wang 1802

p Materials and Processes Technologies V

Influence of Rotary Forging Process on Microstructure and Properties of Niobium-Titanium AlloyJ.T. Han, J. Liu and X. Zhou 1808

Key Technical Analysis of Roll Forming for High Strength Rectangular TubeX.F. Peng, J.T. Han, J. Liu, D.Y. Li and P.J. Yan 1812

Numerical Simulation of Polyurethane Pad Punching ProcessX.X. Wang, J. Liu, J.T. Han and Q. Liu 1817

Preliminary Investigations on Preparation of Cu-Al Bi-Metallic Tubes Using Swaging-Diffusion MethodQ.L. Hao, J.T. Han, J.J. Song and S. Ji 1822

Research Status of Sheet Metal Blanking ProcessesQ. Liu, J.T. Han, J. Liu and X.X. Wang 1827

Technology of Finite Element Analysis for Roll Forming ProcessX.F. Peng, J.T. Han, J. Liu and P.J. Yan 1832

Analysis of Metal Deformed Flow under Adhesive Friction by Ring UpsettingW.Q. Li and Q.X. Ma 1836

Investigation on the Effect of Liquid Hammer Geometry to the Pressure Distribution ofInnovative Hybrid Impact HydroformingM. Marai, L.H. Lang, S.H. Wang, L.J. Lin, C.L. Yang and X. Luo 1843

Large Container End Plate Stretch Forming TechnologyK.L. Mao 1850

Oval Aluminum Tube Extrusion Process Simulation with Two-Hole DiesC. Miao and H.B. Yang 1854

Research on Finite Element Simulation of the Big Size Spring Steel in ContinuousGrooveless RollingB.Y. Wang, J.B. Dai, Y.H. Zhang and D.Q. Xu 1859

The Ring’s Axial Deformation Control Method of Vertical Hot Ring Rolling ProcessK. Hu, X.K. Wang, J.L. Luo and X.J. Wu 1865

Problems of Cold-Bent Notched C-Shaped Profile MembersN.I. Vatin, T. Nazmeeva and R. Guslinscky 1871

Study on Simulation and Experiment of Micro Sheet Metal FormingY. Zhao, L. Luo, Z.Y. Jiang, X.M. Zhao and D. Wu 1876

The Pressed Products on the Basis of GypsumV. Petropavlovskaya, А. Buryanov and T. Novichencova 1882

Effect of DROF Process on the Temperature Field and Roll ForceX. Liu, L. Su and X.H. Liu 1885

Simulation to the Temperature Field for Continuous Casting Billet during Direct Rolling ofFree-HeatingG.Z. Luo, X. Liu, Y. Zhi and X.H. Liu 1890

The Strain Analysis of Plate Cross Wedge Rolling of Spiral Shaft PartsF. Shen, W.J. Yu, W.F. Peng, X.D. Shu and C.J. Yu 1895

Research on a Kind of no Punch Hollow Part Hydraulic Pressure Expand MouldY.R. Song 1901

Manufacturing Process for Bush Type Bearing Metal Using Centrifugal CastingW. Choi, M. Sin, S. Choi, C. Lee, M. Kim, S. Chung, J. Park, S. Kwon, S. Kwon, J. Kim and C.Kim 1904

Chapter 17: Material Machining

Efficiency Analysis on the Synthetically De-Icing Technology Combining Thermal Water-Jet Cutting with Mechanical MillingA.H. Liu, J.Z. Zhou, X.P. Xu and W.J. Chu 1911

Study on Cutting Performance of the Alumina Based Nanocomposite Ceramic ToolQ.F. Zhou, P. Zhou and H.Y. Zhang 1917

TC4 Titanium Alloy Surface Crack Detection and AnalysisZ.Y. Chen, X.Q. Shen and Z.J. Xin 1922

Advanced Materials Research Vols. 941-944 q

A Processing Predictive Model of Ultrasonic Vibration Grinding Assisted Electric DischargeMachining Based on Support Vector MachinesG.M. Yang, Y.P. Zhang, K.Y. Li and G.D. Chen 1928

Design and Tuning of the Ultrasonic Wide-Blade Horn for Joining and Cutting Non-WovenFabricsC.H. Lee, J.S. Seo and D.S. Park 1932

Study on Virtual Machining Process of Peripheral Milling of Thin-Walled WorkpieceY.X. Liu, F. Chen and C.J. Liang 1937

The Evaluation of the up and down Milling Based on its ChipJ. Zajac, V. Fecova, P. Michalik, M. Kočiško, J. Zajac and J. Berthoty 1943

Experimental Study on Effects of Feed per Tooth on Shear Angle and Friction Angle inOrthogonal Milling of Titanium AlloyW.Z. Liu and Q. Liu 1947

Experimental Study on Electrochemical Drilling of Micro Holes with High Aspect RatioY. Liu and S.F. Huang 1952

Chapter 17: Material Machining

Study on Material Removal Mechanisms of Surface Fatigue Layer Based on Handheld HighVelocity Arc MachiningX.J. Tang, Z.Y. Wu, H. Ge, J.W. Yang, W.J. Xu and Q. Gao 1959

Experimental Study on the Optimization of Ti1023 Milling ParametersM.H. Chen, H.C. Yang, X.W. Du and B.S. Yang 1963

Research and Development of Ultrasonic CNC Cutting Path Generation System for NomexComposite MaterialsE. Liu, X.P. Hu and B.H. Yu 1968

Optimization of Electric Discharge Machining Parameters of Al-7%Si-4%Mg with 20% ofRed Mud Metal Matrix CompositesB. Geetha and K. Ganesan 1973

Simulation of Residual Stress in Cold Working of Flat Spiral SpringsZ.H. Li, J.T. Han, J. Cheng and S. Ji 1977

Polishing Experiment Study of the Elastic Coated AbrasivesG.L. Wang, H.B. Zhou, S.L. Guo, D.C. Huang, R.B. Jiao and N. Bayarsaikhan 1981

Machinability Assessment of Titanium Alloy Ti-6Al-4V for Biomedical ApplicationsA. Polishetty, G. Littlefair and K. Praveen Kumar 1985

Study on Key Technologies of Handheld High Velocity Arc Machining EquipmentX.J. Tang, Q. Liu, Z.Y. Zhou, H. Ge and L. Wang 1991

The Cooling Characteristics of Quenching Mist under Different ConditionsH.M. Cheng, S.Q. Zhou, J.Y. Li, T.X. Yang, L. Chen and S.D. Zhang 1995

Chapter 18: Welding and Joining

Microstructure and Bending Property of Welding Joint Prepared by 5356 Welding WireAdded Sc, Zr and ErX.M. Wang, S. Zhu, Z.H. Zhao, Q.W. Wang and X.H. Peng 2003

Study on the Thermal Expansion Displacement during Spot Welding Depending on theMulti-Physical Coupling Finite Element ModelC.P. Liang and Y.B. Li 2007

Research on the Laser Welding Technology of LF21J.R. Qi, X.R. Huang, H.X. Sun and Y.L. Li 2012

Study of End Cracking during One-Sided Submerged Arc Welding with Flux-CopperBackingX.C. Wang, F.G. Lu, I. Andersen and L.S. Yu 2016

Arc Characteristics and Droplet Transfer Analysis of Disconnect Impulse Arc Welding forRepairing Surface Default of Metal PartsJ.W. Yang, J.X. Teng, Q. Zhang and L.D. Meng 2026

r Materials and Processes Technologies V

Influence of Heat Treatment on Microhardness and Microstructure of the Joining Interfacefor Ti-24Al-15Nb-1.5Mo/TC11Y.Y. Liu, X. Lin, W.X. Zhang and Y.B. Zhang 2030

Microstructure and Properties of Mg/Al Dissimilar Joints by GTAW with Al-Si Filler WireH.Y. Du, Y.J. Li and J. Wang 2035

Research on Surfacing Welding and Machining Process of Large Valve Corrosion ResistantLayerY. Zhang, X.C. Zhang and Y.Q. Ma 2039

The Effect of Joule Heat on Coupling Temperature Field of Friction Stir WeldingJ. Yang, L. Dong and X.C. Tian 2043

The Microstructure and Properties of TIG Welded Joint of AZ31B/Cu Dissimilar MetalS.M. Du, J. Hu and T. Lan 2047

Ultrasonic Horn Design and Weldability in Thin Ni Plates WeldingW.Y. Park, C.H. Lee and D.S. Park 2053

Experimental Research of Activating Fluxes in A-TIG Welding of 5052 Aluminum AlloyZ.J. Zhou and Z.C. Huang 2058

Relationship between the Microstructure of the Welded Steel Plates and the Efficiency ofVibration Stress ReliefS.Q. Li, H.Y. Fang, X.S. Liu and W. Cui 2062

Weld-Bonded Joints Properties with Advanced High Strength Steel DP600W.D. Dang, P. Jousset and M. Rachik 2066

Sealing of Sapphire Infrared Windows by Ultrasonic Interfacial Deposition SolderingS. Liu, Z.P. Wang, W. Cui, Y. Dai and D.D. Li 2074

The Implementation of Martensitic Heat-Resistant Steel Welding Performance Analysis andProcessH.L. Xia 2079

Characteristics Evaluation of Weld and Deposited Metal Zones in the Case of Welded withInconel 718 Filler Metal to Cast Steel for Piston Crown MaterialK.M. Moon, J.P. Won, D.H. Park, Y.H. Kim, J.H. Jeong, T.S. Baek and C.T. Seo 2083

Performance of Cohesive Zone Models for Brittle and Ductile AdhesivesJ. Zhang and H. Jia 2089

Improvement of the Wear Resistance of A6061 Plate by Resistance Seam Welding withHigh Carbon Iron Alloy PowdersW.Q. Wang, T. Yamaguchi, N. Ohno and K. Nishio 2093

Welding Spark Parameters Determination for Cyclone Removal CalculationK.I. Strelets, M.B. Kitain and M.V. Petrochenko 2098

Chapter 19: Micro-Fabrication Techniques

Experimental Research of Hydrogenous Fuel Production from Biogas for Usage in FuelCells of Autonomous Power Supply SystemsM.Y. Zubkova, V.I. Maslikov, D.V. Molodtsov and A.N. Chusov 2107

High-Speed, High-Precision Magnetic/Piezoelectric Hybrid Drive Actuator for MicroElectrical Discharge MachiningX.Y. Zhang, K. Uchiyama and T. Ishizuka 2112

Influence of Grain Size and Grain Boundary of Workpiece on Micro EDMQ.Y. Liu, Q.H. Zhang, J.H. Zhang and M. Zhang 2116

Model Structure and Simulation Analysis of a Novel Magetic Suspension Spindle Apparatusfor Micro EDMY.F. Guo, Z.B. Ling, K. Zhang and Y.R. Feng 2121

Study on the Effect of Tool Polarity and Tool Rotation during EDM of Non-ConductiveCeramicsN. Ojha, F. Zeller, C. Müller and H. Reinecke 2127

The Periodical Translocation Gear-Grinding Technique to Improve the Indexing Accuracyof Ultra-Precision GearsS.Y. Ling, Z.F. Lou, Q. Liu and L.D. Wang 2134

Advanced Materials Research Vols. 941-944 s

Experimental Investigation of Fabrication of Double Tapered Hole Array by UsingElectroforming and Mask Electrochemical MachiningX.H. Bao, P.M. Ming and Z.B. Lv 2140

Exploration of Hyperfine Micro-Machining LimitD.Z. Hu 2145

Microfluidic Chips with Micro-Pillar Array for Cell CaptureT. Lai, G.L. Wang and F.Q. Gao 2149

Thermal Accumulation in Metal Micro-Parts Fabricated by Micro Droplet DepositionManufacturing TechniqueH.S. Zuo, H.J. Li, L.H. Qi, J. Luo and S.Y. Zhong 2154

Chapter 20: Laser Processing Technology

Contrast Prediction for Laser Direct Part Marked Data Matrix Symbols on Titanium AlloySubstratesC.L. Li 2161

Study of Effect of Laser Marking Data Matrix Symbols on Titanium Alloy Sheets UsingNd:YAG LaserC.L. Li 2165

Experimental Research on Affect of Water Jet to Laser Compound Processing ofCrystalline SiliconG.F. Yuan, C.T. Zhang, X.H. Chen, C. Zhang and Y.S. Yao 2169

Influence of Laser Input Current and Water Jet to Etching Amount of Polycrystalline SiWaferX.H. Chen, C. Zhang, G.F. Yuan, C.T. Zhang and Y.S. Yao 2173

Thin Wall Formed by Multi-Layer Overlapping Laser Cladding FormingF.X. Huang, Z.H. Yang, D.W. Jin, L.J. Qin, J.G. Liu and Z.H. Jiang 2178

Laser-Energy-Density Dependent Formation of Al2O3-TiC Coating by Laser-AssistedCombustionC.X. Lu, H.P. Li, P. Chen and Y.W. Yan 2182

Directly Manufacturing Mouse Mold by Plasma Deposition ManufacturingX.H. Xiong, J.L. Chen and D.M. Quan 2190

SLC Technologies for Ferroalloy Part Surface ModificationJ. Liu 2194

Laser Cladding of Co-Based Alloy on 316 Stainless SteelS. Zhang, C.L. Wu, J. Liu, C.H. Zhang and J.Z. Tan 2198

Formation of TiC0.3N0.7/TiN Composite Film on Ti-6Al-4V Alloy by YAG Laser IrradiationX. Zeng, T. Yamaguchi, Y. Ida and K. Nishio 2202

Chapter 21: Machining Tools, Testing Technologies and ErrorMeasurement

New Method of Plane to Plane Parallelism Error Measurement Based on Flatness PlaneM.I. Khan, S.Y. Ma and S. Saifullah 2209

Modeling and Identification of Geometric Error Based on Screw TheoryG.J. Zhao, L. Zhang, S.J. Ji and X. Wang 2219

Measurement Uncertainty Evaluation of a Virtual Instrument for Thickness Monitoring ofBrush-Plated CoatingX.D. Jing and B.S. Xu 2224

Efficient Genetic Algorithms for Measurement of Flatness Error and Development ofFlatness Plane Based on Minimum Zone MethodM. Ilyas Khan and S.Y. Ma 2232

Simulation Analysis and Experimental Study of Initial Permeability Testing TechnologyF. Guo and S.K. Ren 2239

The Study of Closed-Loop Position Control System Based on CNC ProcessingX. Zhou 2243

t Materials and Processes Technologies V

Chapter 22: Modeling, Analysis and Simulation of Processes

Influences of Edge Rolling on Unsteady Deformation of Metal in Roughing Stage ofContinuous Hot Strip RollingR. Ren, X.P. Zhang and X. Chen 2249

Mathematical Model of Topology Modification of Tooth Surface and Error CharacteristicsH.L. Wang, X.Z. Deng, J.J. Yang and K. Xu 2255

Modeling for HAGC Press System of Rolling MillH.F. Wang 2259

Computational Solution of Contact Problems with Unilateral Constraints and Friction byStep-by-Step AnalysisA. Lukashevich 2264

Simulation and Analysis of Material Horizontal Vibration Conveying Based on DEMZ.Y. Qin, Z.L. Zhao and Y.J. Zhao 2268

The Fiber Orientation Angle Determination for a Composite Anisotropic Solid Rod inPultrusionA.A. Kutin, A.N. Krasnovskii and I.A. Kazakov 2273

Application of Two Damage Identification Methods Based on Sensitivity Analysis in SteelStructureY.Y. Wang and W.X. Sun 2279

Prediction and Control of Hot Pressing Rebound of Fan Blade Based on ThermalMechanical Coupling SimulationP. Yang 2284

Analysis of an Orbital Grinding System for Grinding Crankshafts for Large Ship EnginesJ. Jang, H.S. Bang, W.C. Choi, C.R. Cho and S.J. Cho 2288

Influence of Cold-Rolled Strip Temperature on the Interference Fit of Entire RollerEmbedded Shapemeter RollH.M. Wu and H.M. Liu 2293

Numerical Simulation and Process Analysis for Injection Forming about the Thin-WallConical Centrifugal DiscJ.H. Zhou, L.G. Liu and X.M. He 2298

Numerical Simulation of Liner Curvature Radius on Formation of LEFPR.J. Gou 2305

Study on Transverse Uniformity of Phase Transformation for Hot-Rolled Strip on Run-out-TableD.C. Wang, F. Dong and H.M. Liu 2309

Finite Element Modelling of Copper by Equal Channel Angular ExtrusionA. Krishnaiah 2313

Hot-Rolling Batch Planning Problem of Round Bar with Roller CapacityL. Bai, T.K. Li, B.L. Wang, G.J. Dong and S.Y. Xu 2317

Modeling and Virtual Simulation of Hard Surface Milling and Forming Process UsingAdvanced CAE SystemsR. Dubovská and J. Majerik 2321

The Inverse Prediction for Profile Extrusion Die Based on the Finite Element MethodM. Zhang, C.Z. Huang, Y.X. Jia and J.L. Liu 2332

A Numerical Approach for Simulating a Self-Contacted Elastic RodG.X. Wang and W.J. Zhao 2336

A Schwarz Alternating Algorithm Using Elliptical Arc Artificial Boundary for ExteriorProblems with a Concave AngleY.J. Chen and Q.K. Du 2341

Material Removal Model and Experimental Analysis in the CMP of Si-Based Fiber ArrayQ. Hu, D.F. Liu and W.B. Zou 2345

Research on FEM Simulation of Splitting Spinning Progress about 2024 Aluminum AlloyL.L. Li, Z.Y. Cai, H.Q. Xu, D.L. Wang, F.Y. Hou, T. Huang, B. Lu, Y.N. Li and Y.M. Guo 2366

Finite Element Simulation of Seven-Hole Propellant Extrusion and the Optimization of DieCompression RatioD.D. Ji and X. Liao 2373

Advanced Materials Research Vols. 941-944 u

Modeling of Multilayered Sheets for Thermoforming ApplicationsZ. Oueslati, M. Rachik and M.F. Lacrampe 2378

Numerical Investigation on Angle of Repose of Cylindrical ParticlesH. Chen, X.Q. Zhao, Y.G. Xiao and Y.L. Liu 2383

Chapter 23: Thermal Engineering Theory and Applications

Diffusion and Oxidation Wear of Superhard Cutting Tool Based on ThermodynamicsEnthalpyF. Shao, Y.T. Wang, L.J. Zou, Y.Y. Wu and C. He 2389

Stress Modeling of Large Cylindrical Ingot Heating ProcessJ.M. Zheng and X.Y. Gao 2393

Study of Crack Length Measurement and Crack Tip Plastic Zone Determination byInfrared ThermographyY.G. Zhao, J.Z. Liu, B.R. Hu, B. Chen and X. Guo 2399

The New Model of Laminar Cooling System and its Fieldbus SystemH.F. Wang 2405

Experimental Research on Crock-Type Metal Fibre Burner of Chinese Cooking ApplianceG.P. Li, Y.Z. Cui and C.B. Shao 2410

Cooling Rate, Microstructure and Property Studied of Spray Cooling of Heavy Shell RingRollingJ.L. Sun, Z.Y. Jiang, F. Jia and Y.Z. Zhang 2414

The Transient Temperature Field Simulation and Analysis of Machinery’s Components byABAQUSJ.X. Sun and W.J. Xu 2420

Numerical Simulation Analysis of Rail Head for U75V in the Process of Spray CoolingTemperature FieldL. Chen, X.N. Li, J.L. Duan and Y.Y. Liu 2425

Study on Energy Saving Model of Air Condition for Subway StationL.X. Zhang, G.Q. Li, P. Mitrouchev and L. Guo 2432

Effect of Normal Pressure on the Coupled Temperature Field of Pin-Disc inElectromagnetic EnvironmentJ.Q. Tao, L. Dong, Z.W. Liu and J. Yang 2436

Experimental Study on Film Cooling Efficiency of Flat Plate through InfraredThermography TechniqueW. Chen, H.H. Shi, R.L. Dong and L.F. Liu 2440

ISO 11439 I-Cylinder Bonfire Test and Safety EvaluationY.W. Yuan and W.P. Xu 2444

Modelisation of Calorific Capacity by the Debye and Brillouin Functions for theFormalization of the Magnetothermal ProblemB. Merouane and M. Sebbani 2449

Energy Consumption Analysis of Thermal Regeneration of Activated Cokes Loaded withSO2J. Zhao, J.Q. Song, T. Wang and C.Y. Ma 2457

The Influence from the Return Water Temperature of Condenser on the Cooling Capacityand Power Consumption of the Cold-Water Screw Unit Used on Cold StorageZ.L. Ding, F.T. Li and C.F. Zhang 2461

Application of Thermal Contact Resistance in Simulation of Heat Dissipation by CPU HeatSinks Based on ANSYSY.Z. Liu, Z.S. Huang, B. Feng, J.H. Wei and J.M. Zeng 2465

Heat Transfer Capacity of Composite Cooling System for Automobile Lithium-Ion Batterywith Heat Pipe and Phase Change MaterialsM.G. Yu, S.H. Wang, J.Q. E and X.F. Hu 2469

The Influence of the Position of the Steel Element to Heat Flow in the Wall of the IndustrialFreezerM. Mohapl and P. Vojkůvková 2474

Effect of Model Structure on Thermal Conductivity of Sandwich CompositesY.F. Jin, C. Zhang, X. Qian and F.Q. Yang 2478

v Materials and Processes Technologies V

Thermal Insulative Performance of Bamboo Leaf Aerogel Opacified Using ActivatedCarbon Compared with Carbon BlackK.W. Kow, R. Yusoff, A.R. Abdul Aziz and E.C. Abdullah 2482

The Influence of Induction Heating to Remelting Temperature Radial DistributionY.X. Jia and C.Z. Wang 2486

Theoretical Analysis and Experimental Study on Heat-Transfer in Cryogenic GasAtomization Jet Cooling Nickel-Base AlloyX.Y. Guan and A.S. Wu 2490

Thermal Stress Distribution Simulation Analysis for Disc Brake of Heavy VehiclesS.F. Ze 2495

Thermomechanical Coupled Analysis of Multidisc Friction Pairs in Hydro-Viscous DriveJ.Z. Cui, C.T. Wang and F.W. Xie 2500

Thermal Structure Coupling Analysis of Universal Mill’s Horizontal Roller Ring Based onANSYSS.J. Shen, X.P. Guo and S. Zhou 2504

The Research of the Effect of Velocity on Coupled Temperature Filed in Pin-on-RingFriction Pair under Electromagnetic FieldQ. Wen, L. Dong, J. Yang and Z.W. Liu 2508

Research on Design and Principles of New Regenerant for Restoring Performance of AgedPitchX.Y. Song and Q. Miao 2512

Chapter 24: Mineral and Soil Mining and Processing

Hydraulic Fracturing Technology Design in Natural Fracture ReservoirsB. Cai, Y.H. Ding, Z.Q. Cui, Z.Z. Yang and H. Shen 2521

Study on Floor Pressure Relief Law of Simultaneous Mining Working Faces in closeDistance Seam Group of Dongsheng CoalfieldD.M. Chen and C.L. Zhang 2525

Study on the Abutment Pressure and Advanced Support of Driving Roadway along Goaf ofIsolated Mining FaceL. Li, A.B. Zhang and C.L. Zhang 2533

Experimental Study of Fill Body Non-Uniformity for Cut-and-Fill MiningW.Y. Xu, L.J. Guo, X.C. Yang and C. Yang 2539

Simulation and Analysis of Anti-Explosion Capability for Coal Mine Refuge ChamberY.Y. Zhou, J.L. Wan, Y.W. Zhao and Q.J. Mao 2547

The Study of Remaining Oil Distribution in Tazhong 4 Oilfield’s TZ402CIII Oil GroupY.K. Liu, Z. Wang, H.M. Tang, J.M. Wang, W.H. Zhao and Y.P. Wang 2553

Study of the Trellis Support of Working Face Roadway in Impact Coal SeamY.K. Lv, C. Jiang and Y.D. Jiang 2558

Study on the Mining Induced Stress of Hard Surrounding Rock under Dynamic PressureJ.P. Liu, S.J. Zhan, Y.P. Guan, L.J. Chuan, J. Tang and H.W. Wang 2565

Plugging Agent Type Selecting Methods for Channeling ReservoirS.L. Wang and Y. Zhang 2570

Study on Deep Reduction of Oolitic Hematite Assisted with Microwave RadiationZ.H. Ma, J.Z. Zhang, W. Li and J. Chen 2574

Study on Variation Regular Pattern of Development Indexes in Beierdong Block after LayerRecombinationL.Y. Song, J.Y. Mou, J.C. Zhang and J.W. Wang 2578

Evaluation on Shale Gas Potential in the Sheling Group Yitong BasinH.Y. Xu, H.T. Xue, S.F. Lu, W.B. Huang and L. Shi 2584

Finite Element Analysis and Optimization Design on Single Screw Pump of OffshorePetroleum Well Cementing LADS DeviceZ.X. Wang 2588

The Characterization of the Rock Microscopic Pore Structure before and after Strong BaseASP FloodingM. Fan, Y.K. Liu and S. Liang 2596

Advanced Materials Research Vols. 941-944 w

Discussion on Support Problems on Soft Rock RoadwayM. Li 2601

Research on Rock Mechanics Characteristics of Mud Sandstone NanTun Formation ofHaiLaEr OilfieldY.K. Liu, Y. He, F.J. Wang, Y.P. Wang, H.M. Tang and Y.N. Jiang 2606

An Experimental Study on the Mechanical Properties of Cemented Rock-Tailings FillL.J. Guo, K.P. Zhou, X.C. Yang, G.S. Liu and W.Y. Xu 2611

Investigation on the Sintering Properties of Mullite Al2O3-70%C.H. Gao, J.L. Sun, Y. Li, J.J. Zhang, J.L. Zhang and S.L. Liu 2620

Status Analysis of the Frozen Soil’s Dynamics Parameter StudyL.Z. Cui, G.M. Li, Y.T. He, Q. Liao and F. Luo 2626

Studies about the Drained Creep Characteristic of Silt Soil on k0 ConsolidationY.F. Wang, Z.G. Zhou and Z.Y. Cai 2631

Characterization and Application of Super Clean CoalY.M. Cui, Y.Q. Xu, Y.Q. Hu, Z.K. Yuan, L.Y. Li, Z.X. Zhang and F.Y. Zhao 2636

Study on Extractiing of Heme from Tilapias Blood by Enzymatic MethodW.J. Zhou, J.W. Cen, Q.R. Hu, S.X. Hao, L.H. Li, X.Q. Yang, Y.Q. Zhao and Y. Wei 2641