WEST CENTRAL RAILWAY · 2018. 5. 1. · ELW/BSL/3/WAM4/F.79/115 or latest.(PL NO :25986648) 180 kVA Static Inverter for conventional electric locos As per RDSO Specn No. ELRS/SPEC/SI/0018,

20.11.3350

20.12.8001

30.10.1206

30.11.1066

Bogie foot step assly.to drg. No.ELW/BSL/3/WAM4/F.79/115 orlatest.(PL NO :25986648)

180 kVA Static Inverter forconventional electric locos As perRDSO Specn No.ELRS/SPEC/SI/0018, REV-1 ofMarch 2006 & amendment no 01vide RDSO L.No. EL/1.2.9 dt.05.02.09 or latest.Revised IRS Side Buffer Casingfor coaching stock (Casting) toDrg. No.-RDSO/SK-94043, Alt.-3.(Buffer casing casting shallconform to IS: 1030-89 and shallbe procured only from 'A' Classfoundries to IS: 12117-1996).(PLNO :30981840)Inlay for Lavatory Chute to Drg.No.-F-1-2-009, Alt-23 & m, ItemNo.-1 & 2 (Core Holes for M-12Screw are to be JIG DrilledApplicable for CCL.IV.)(PL NO:30120019)

SMM-D(ELS)ITARSISMM-D(ELS)NEW KATNI JNSMM/ELS/TKD

Sr. SectionEngineer(stores)Tuglakabad

DY.CMM-D(CRWS)BHOPAL

DYCMM-D(CRWS)BHOPAL

90.000

52.000

120.000

5.000

500.000

2700.000

NOS.

NOS.

NOS.

NOS.

NOS.

NOS.

262.000

5.000

500.000

2700.000

Total

Total

Total

Total

1

2

3

4

SrNo

Tender No Description Required At Quantity

WEST CENTRAL RAILWAY

Office of Controller of Stores,West Central Railway, Jabalpur- 482001 Advertise Tender Notice No. EPS/13/2012 for supply of Stores visit us at websitewww.wcr.indianrailways.gov.in For and on behalf of the President of India, Controller of Stores / West Central Railway/ Jabalpur, inviteselectronics tenders, from the reputed and experienced contractors, for the supply of following items:

1. THIS IS AN E-TENDER THROUGH www.ireps.gov.in AS SUCH NO MANUAL OFFER SHALL BE ACCEPTEDEVEN IF RECEIVED BEFORE DUE DATE AND TIME. 2. Bidder may go to quick search option to get the details of the tender & may submit Price bid in Electronic Format only on the above Website till the last date and time for submission. 3.Tender cost & EMD to be submitted within 10 working days from the date of tender opening date through crossed demand draft in favour of FA&CAO/WCR/JBP payable at Jabalpur and their details must be provided in the bid form at www.ireps.gov.in. 4. Tender Closing Time: - 12:30 hrs. 5. IRS/RDSO drawings & specifications can be obtained from DG, RDSO, Lucknow-226011 on payment. 6. Tenderers are requested to carefully go through the tender/bid document for eligibility criteria, exemption to the Tender cost etc., and other terms & conditions. 7. IRS terms & conditions and special terms & conditions shall be applicable.

Controller of Stores

MATERIAL MANAGEMENT DEPARTMENT

Cost of TenderDocuments

(Rs.)

Due Date

150

2000

1000

500

28-MAR-12

28-MAR-12

28-MAR-12

28-MAR-12

AT/

AT/

AT/

AT/

/-

/-

/-

/-

30.11.1087

30.11.1361

30.11.2604

30.11.4139

30.12.1030

30.12.1379

30.12.2169

40.11.2613

Vestibule sliding door assembly forICF/CN & BEML/CN coaches toMISC/SK-3608, SHEET-1,2,3.(PLNO :30250950)

Wash hand sink 'D' type to Drg.No. C/LF- 1885, Alt-6.(PL NO:30988226)

MODIFIED BODY SIDESTANCTION FOR BOXNWAGON COMPLETEASSEMBLY TO W/BF-1114/KAlt.-1.(PL NO :38987533)Hand wheel for BOXN HLWagon.WD-09057-S-01 Alt.2 orlatest, Item No.1 Part Drg.No.WD-96031-S-1 Alt-Nil or latest.(PL NO:38124269)Guide with closing plate for axlebox guide arrangment to Drg.no.T-0-3-670, ITEM 1 & 4,COL.1ALT.2 & g.(PL NO :30030225)

SET OF ITEMS FOR ANTICLIMBING ACPARRANGEMENT (TOTAL 21ITEMS IN ONE SET) AS PERICF/SK/WGSRJ 2-3-5-203, ALT-C AND CRW/SK-AB-62 (ITEMSAS PER LIST ENCLOSED)(PLNO :30988688)Spring Plank for 'CASNUBBOGIES' to RDSO drg. no.- SK -69594, ALT- 34 or latest, Item -1.(PL NO :38982705)100 VA individual static invertor forLAPTOP / MOBILE chargingpoints as per RDSO SpecificationNo. RDSO/PE/SPEC/TL/0142-2010 (REV.0) of A type(HorizontalType)(PL NO :45981747)



DY.CMM/KOTA

AMM-D(BOXN)NEW KATNI JN



DY.CMM/KOTA


165.000

1988.000

150.000

1200.000

682.000

716.000

169.000

1474.000

NOS.

NOS.

NOS.

NOS.

NOS.

SET

NOS.

NOS.

165.000

1988.000

150.000

1200.000

682.000

716.000

169.000

1474.000

Total

Total

Total

Total

Total

Total

Total

Total

5

6

7

8

9

10

11

12

SrNo


500

500

500

500

500

500

1000

1000

28-MAR-12

28-MAR-12

28-MAR-12

28-MAR-12

28-MAR-12

28-MAR-12

28-MAR-12

28-MAR-12

AT/

AT/

AT/

AT/

AT/

AT/

AT/

AT/

/-

/-

/-

/-

/-

/-

/-

/-

40.11.8131

40.12.8003

SUPPLY AND SUPERVISIONOFERECTION,COMMISSIONINGAND TESTING OF 132KV/27KV,21.6 MVA,50HZ ONANSINGLE PHASE TRACTIONPOWER TRANSFORMER ASPER RDSO SPECIFICATIONNO.ETI/PSI/118(10/93) WITHA&C SLIP NO.1 TO 8 (JULY2003) INCLUDINGIMPROVEMENT INPERFORMANCE ANDRELIABILITY OF TRACTIONPOWER TRANSFORMER VIDERDSO LETTERNO.ETI/PSI/TR/NP-VR/POLICY/2002 DATED19.03.02 OR LATEST IFISSUED,WITH FOLLOWINGSPARES. (1)BREATHER UNITWITH SILICAGEL-01 NO.(2)BUCHHOLZ RELAY- 01 NO.(3)TERMINAL CONNECTORSFOR PRIMARY ANDSECONDARY BUSHINGS -01NO. (4)PRESSURE RELIEFDEVICE -01 NO.SUPPLY,INSTALLATION,TESTING ANDCOMMISSIONING OF 33/11KV,5000 KVA OUT DOORTRANSFORMER OF 3PHASE,50 Hz, DOUBLECOPPER WOUND, PLINTHMOUNTED, OFF LOAD TAPCHANGER, DELTA-STAR(VECTOR GROUP DYN-11) ENERGY EFFICIENTTRANSFORMER,THE MINIMUMNO LOAD LOSS SHOULD NOTEXCEED 4 KW AND MAXIMUMLOAD LOSS SHOULD NOTEXCEED 21 KW.THETRANSFORMER SHOULD BESUPPLIED COMPLETE WITHALL ACCESSORIES AS PERSPECIFICATION ATTACHED ATANNEXURE-1.MAKE-ABB,BHEL,CGL,NGEF,SIEMENS,VOLTAS,TESLA,ECEVOLTAMP,ANDREWYULE,EMCO,ALSTHOM,BHARAT BIGLEE,GEC,TELK ORSIMILAR

DY.CEE(S&C)KOTA

SE/Ele/Cons/HQ/JBP

4.000

2.000

NOS.

NOS.

4.000

2.000

Total

Total

13

14

SrNo


2000

2000

28-MAR-12

28-MAR-12

AT/

AT/

/-

/-

50.11.5024

50.11.8144

60.12.5001

Supply and Installation of MCPcard suitable for TadiranFlexicom-6000 Exchange installedin DRM office compound JabalpurWCR. Tchnical Spec.-MCP ATScard (Tadiran make) Boot devicesLED flash, Serial port, 9 pin D-typeKBO terminal-0, clok ratio-50% -6205%, Version GC1.4:22.1:V4.D, S/W version:-14.67.31-512 MB, Thermal dutycycle 87.5%, PRI master Auto.SUPPLY OF SMPS BASEDINTEGRATED POWER SUPPLYSYSTEM (IPS) RDSOSPECIFICATION NO.RDSO/SPN/165/2004/WITHAMENDMENT 05 AS PER WCRDRAWING NO. WCR/N-HQ/IPS/LC GATE/08/03/ALT-1.THE LATEST AMENDMENT INFORCE ON THE DATE OFOPENING OF TENDER WILL BEAPPLICABLE.LONG TRAVEL WHEEL FOREOT CRANE AS PER DRG. NO.CRW/SK-896 (ATTACHED)

SSE/TELE/M/JBP

SSE/SIG/KTTNORTHSSE/SIG/M/DMOSSE/SIG/M/JBP

Sr. SectionEngineerMILLWRIGHT BPL

1.000

22.000

4.000

6.000

8.000

NOS.

NOS.

NOS.

NOS.

NOS.

1.000

32.000

8.000

Total

Total

Total

15

16

17

SrNo


150

2000

150

28-MAR-12

28-MAR-12

28-MAR-12

AT/

AT/

AT/

/-

/-

/-

62.11.4005 Cut Piece cloth of 250 cms lengthfor Full Sleeves Shirt, Wovenshirting made of polyester andcotton blend confirming tospecification no. IS 15852/2009except for soil release efficiencytest and limited flame spread indextest. Width: 91 cm excludingselvedges. Shade : DARK GREY.Construction particulars a)Nominal count of warp yarn 50s(20 Tex X 2) b) Nominal count ofweft yarn 50s (20 Tex X 2) c)Threads per Decimeter -Warp440 d) Threads per Decimeter-Weft 360 e) Mass : 102 gm / M2 f)Fibre composition Polyester 67PERCENT g) Fibre compositionCotton 33 PERCENT h) Weave:Plain.Manufacturer's name to bewoven on both sides of selvedgesthroughout the length of the cloth, itshould be clearly visible. Eachpiece shall be packed in separateresealable polythene pack of size12' x 15' of 40 micron thickness."WEST CENTRAL RAILWAY"and the manufacture name withmonth and year of manufacturingshould be printed on eachpack.(PL NO :79984009)

SMM-D(GSD)BPL

6895.000 NOS.

6895.000Total

18

SrNo


500 28-MAR-12AT/ /-

62.11.4070 Cut Piece cloth of 275 cms lengthfor H/S BUSH SHIRT Wovensuiting made of polyester andcotton blend confirming tospecification no. IS 15853/2009except for soil release efficiencytest and limited flame spread indextest. Width: 91 cm excludingselvedges. Shade: DARK GREY.Construction particulars: (a)Nominal count of warp yarn 30s/2(20 Tex X 2). (b) Nominal count ofweft yarn 30s/2 (20 Tex X 2). (c)Threads per Decimeter -Warp260. (d) Threads per Decimeter-Weft 190.(e) Mass 190 gm /M2.(f) Fiber composition Polyester67 PERCENT.(g) Fibercomposition Cotton 33PERCENT.(h) Weave:PlainManufacturer's name to bewoven on both sides of selvedgesthroughout the length of the cloth, itshould be clearly visible. Eachpiece shall be packed in separatepolythene pack of size 12' x 15' of40 micron thickness withresealable. "WEST CENTRALRAILWAY" and the manufacturename with month and year ofmanufacturing should be printedon each pack.(PL NO :79980430)

SMM -D(GSD)BPL

7107.000 538.000

NOS.NOS.

7645.000Total

19

SrNo


500 28-MAR-12AT/ /-

62.11.4075 Cut Piece cloth of 225 cms lengthfor Half Sleeves Shirt, Wovenshirting made of polyester andcotton blend confirming tospecification no. IS 15852/2009except for soil release efficiencytest and limited flame spread indextest. Width: 91 cm excludingselvedges. Shade : ORANGEConstruction particulars a)Nominal count of warp yarn 50s(20 Tex X 2) b) Nominal count ofweft yarn 50s (20 Tex X 2) c)Threads per Decimeter -Warp440 d) Threads per Decimeter-Weft 360 e) Mass : 102 gm / M2 f)Fibre composition Polyester 67PERCENT g) Fibre compositionCotton 33 PERCENT h) Weave:Plain.Manufacturer's name to bewoven on both sides of selvedgesthroughout the length of the cloth, itshould be clearly visible. Eachpiece shall be packed in separateresealable polythene pack of size12' x 15' of 40 micron thickness."WEST CENTRAL RAILWAY"and the manufacture name withmonth and year of manufacturingshould be printed on eachpack.(PL NO :79990447)

SMM -D(GSD)BPL

17714.000 NOS.

17714.000Total

20

SrNo


500 28-MAR-12AT/ /-

65.11.8008

65.11.8060

80.11.1020

80.12.1063

90.11.1301

Heavy duty single endedratcheting ring spanners in acrossflate size 24 mm, head 45 to55mm approx, thickness 20 to 28mm approx, OAL 350 to 400 mmapprox. Resistant againstcorrosion, Durable in nature.Make-Mekaster/Toolscraft orsimilar.Heavy duty pipe wrenches ofalluminium alloy. Pipe capacity 1/2"min to 2" max, with weight 1.2+/-0.1 kg approx.Nominal size350mm+/-50 mm. Resistantagainst corrosion, as per IS 4003Part-II. Maker- Makaster/MTC andsimilar.Heavy duty pipe wrenches ofalluminium alloy. Pipe capacity 1/2"min to 2" max, with weight 1.2+/-0.1 kg approx.Nominal size350mm+/-50 mm. Resistantagainst corrosion, as per IS 4003Part-II. Maker- Makaster/MTC andsimilar.PROCUREMENT OF SHOCKPULSE TESTER MODEL T -4000 OR SIMILAR FORCHECKING THE TM BEARING.

Servo Press-150 RR of M/s IOCor Bharat Compressor Oil-150 ofM/s BPCL or Hycom 150 P of M/sHPCL. Packed in 210 ltrs. in newNon returnable M.S Drum.(PL NO:80014975)

Graphited Grease TO IS 408Grade 0 (This item is reserved toRDSO approved firms only) to ISSpecn. NO. 408/1981 Reaffirmed-93(PL NO :80981185)Bamboo seasoned straight solid38 mm dia x 3.05 mtrs. long forhammer shafts ends should be cutat least 50 mm away fromknots.(PL NO :93010217)

Sr.SectionEngineer (Elect.Constn) BPL



SR.SECTIONENGINEER/ELS/ ITARSI

SMM-D (ELS)NEW KATNI JNSMM-D(D)ITARSISMM-D(D) NEWKATNI JNSMM-D(ELS)ITARSISMM/ELS/TKD

SMM-D(GSD)BPL


50.000

50.000

50.000

1.000

5670.000

14910.000

17850.000

3570.000

2520.000

53.610

2527.000

NOS.

NOS.

NOS.

NOS.

LTR

LTR

LTR

LTR

LTR

MTS.

NOS.

50.000

50.000

50.000

1.000

44520.000

53.610

2527.000

Total

Total

Total

Total

Total

Total

Total

21

22

23

24

25

SrNo


150

150

1000

2000

150

28-MAR-12

28-MAR-12

28-MAR-12

28-MAR-12

28-MAR-12

AT/

AT/

AT/

AT/

AT/

/-

/-

/-

/-

/-

Bogie foot step assly.to drg. No.ELW/BSL/3/WAM4/F.79/115 or latest.(PLNO :25986648)

SMM-D(ELS)ITARSISMM-D(ELS)NEW KATNI JNSMM/ELS/TKD

90

52

120

NOS.

NOS.

NOS.

After 01.05.12. Within twomonths.After 01.05.12. Within twomonths.After 01.05.12. Within twomonths.

Total Quantity 262

Tender No : AT/20.11.3350TENDER BOX TITLE & COLOUR: AT/Yellow

Tender due on : 28-MAR-12Closing At :12.30 HrsPrice of booklet : Rs. 150/EMD Amount :7600

WEST CENTRAL RAILWAYTENDER SCHEDULE

Description Consignee Quantity Unit Dely Terms .

1.Delivery capacity per month should be clearly indicated by the firm, along with offered delivery period.2.Railway reserves the right to place the orders for part quantity on more than one source and also to take delivery ininstallment. 3.The Tenderer must quote Ex-works rate, FOR destination rate separately and freight charge must be quoted clearly andseparately for transportation byRail/Road to consignees.4.No excise duty and sale tax on freight element will be payable. Vendors must indicate freight element separatelyotherwise it will be assumed that vendors are absorbing/ bearing the freight themselves.5.IRS Conditions of contract latest amendment will be applicable.6.In case rate quoted by the firm are different in word and figures the lower of the two shall be taken for all purpose duringtender finalization simultaneously keeping the right to pass over the offer.7.Firms who are not registered with this railway/NSIC for this item or registered for lower monitory limit, should agree todeposit 10% security deposit.8.INSPECTION BY RITES.9.Bill paying officer & Passing officer-FA&CAO/WCR/JBP.10.This is an item controlled by CLW and railway reserve the right to order entire or Bulk quantity from CLW approvedsources only. or Bulk/Entire Qty is reserve to be purchased from the firm having past performance for supplying same/similaritem.

SPECIAL CONDITIONS: Tender for this item is invited through e-procurement on line only therefore tenderers are requestedto quote through IREPS at website www.ireps.gov.in Manual tender received against this tender will not be considered.

180 kVA Static Inverter for conventionalelectric locos As per RDSO Specn No.ELRS/SPEC/SI/0018, REV-1 of March 2006& amendment no 01 vide RDSO L.No.EL/1.2.9 dt. 05.02.09 or latest.

Sr. SectionEngineer(stores)Tuglakabad

5 NOS. Within three months.

Total Quantity 5





1.Delivery capacity per month should be clearly indicated by the firm, along with offered delivery period.2.Railway reserves the right to place the orders for part quantity on more than one source and also to take delivery ininstallment. 3.The Tenderer must quote Ex-works rate, FOR destination rate separately and freight charge must be quoted clearly andseparately for transportation byRail/Road to consignees.4.No excise duty and sale tax on freight element will be payable. Vendors must indicate freight element separatelyotherwise it will be assumed that vendors are absorbing/ bearing the freight themselves.5.IRS Conditions of contract latest amendment will be applicable.6.In case rate quoted by the firm are different in word and figures the lower of the two shall be taken for all purpose duringtender finalization simultaneously keeping the right to pass over the offer.7.Firms who are not registered with this railway/NSIC for this item or registered for lower monitory limit, should agree todeposit 10% security deposit.8.INSPECTION BY RITES.9.Bill paying officer & Passing officer-FA&CAO/WCR/JBP.10.This is an item controlled by RDSO and railway reserve the right to order entire or Bulk quantity from RDSO approvedsources only.

SPECIAL CONDITIONS: Tender for this item is invited through e-procurement on line only therefore tenderers are requestedto quote through IREPS at website www.ireps.gov.in Manual tender received against this tender will not be considered.

Revised IRS Side Buffer Casing forcoaching stock (Casting) to Drg. No.-RDSO/SK-94043, Alt.-3.(Buffer casingcasting shall conform to IS: 1030-89 andshall be procured only from 'A' Classfoundries to IS: 12117-1996).(PL NO:30981840)


500 NOS. Within 60 days.

Total Quantity 500





1. The offer shall be kept valid for acceptance for a minimum period of 90 days from the date of opening of the tender. Incase the tenderer stipulates validity period of less then 90 days, the offer may be treated as unresponsive and liable to beignored 2. INSPECTION BY RITES. 3. Bill paying officer is FA andCAO-WCR-JBP. 4. In cases of delays in contractualdelivery, full LD will be levied as per IRS conditions of contract and being a contractual provision no request for LD waival willbe considered, notwithstanding any past instances of such waiver or levy of token LD. 5. Firm should quote taxes and exciseduly clearly, failing which it will be presumed that same are included in rates and will be paid by firm. 6. The firm shouldsubmit the photocopy of the latest contract secured by them any of the Indian Rly. along with performance statement of thisitem. 7. Railway reserves the right to place the orders for part quantity on more than one source and also to take delivery ininstallments. 8. Tenderer must indicate monthly delivery schedule 9. Other terms andconditions are as per Tender conditionAnnexure A and B along with amendments-modification if any, available on home page of COS-WCR under Documents-COS-WCR documents in the IREPS website 10. IRS conditions of contract [latest amendment] will be applicable. 11. This isa risk purchase tender against PO No.30.10.1206.1.02850 dt: 02.02.2011. Offer from the defaulter firm if not accompaniedby 10 percent security deposit, shall be summarily rejected.

Inlay for Lavatory Chute to Drg. No.-F-1-2-009, Alt-23 & m, Item No.-1 & 2 (Core Holesfor M-12 Screw are to be JIG DrilledApplicable for CCL.IV.)(PL NO :30120019)

DYCMM-D(CRWS)BHOPAL

2700 NOS. After 01.04.2012, 50 %before 31.05.2012 &balance within31.08.2012.

Total Quantity 2700





1. The offer shall be kept valid for acceptance for a minimum period of 90 days from the date of opening of the tender. Incase the tenderer stipulates validity period of less then 90 days, the offer may be treated as unresponsive and liable to beignored 2. INSPECTION BY CONSIGNEE. 3. Bill paying officer is FA&CAO/WCR/JBP. 4. In cases of delays in contractual delivery, full LD will be levied as per IRS conditions of contract and being a contractualprovision no request for LD waival will be considered, notwithstanding any past instances of such waiver or levy of token LD. 5. Firm should quote taxes and excise duly clearly, failing which it will be presumed that same are included in rates and willbe paid by firm. 6. The firm should submit the photocopy of the latest contract secured by them any of the Indian Rly. along with performancestatement of this item. 7. Railway reserves the right to place the orders for part quantity on more than one source and also to take delivery ininstallments. 8. Tenderer must indicate monthly delivery schedule9. Other terms &conditions are as per Tender condition Annexure A & B along with amendments/modification if any,available on home page of COS/WCR under Documents/COS-WCR documents in the IREPS website10. IRS conditions of contract [latest amendment] will be applicable.

Vestibule sliding door assembly for ICF/CN& BEML/CN coaches to MISC/SK-3608,SHEET-1,2,3.(PL NO :30250950)


165 NOS. Within 31.08.2012.

Total Quantity 165





1. The offer shall be kept valid for acceptance for a minimum period of 90 days from the date of opening of the tender. Incase the tenderer stipulates validity period of less then 90 days, the offer may be treated as unresponsive and liable to beignored 2. INSPECTION BY RITES. 3. Bill paying officer is FA&CAO/WCR/JBP. 4. In cases of delays in contractual delivery, full LD will be levied as per IRS conditions of contract and being a contractualprovision no request for LD waival will be considered, notwithstanding any past instances of such waiver or levy of token LD. 5. Firm should quote taxes and excise duly clearly, failing which it will be presumed that same are included in rates and willbe paid by firm. 6. The firm should submit the photocopy of the latest contract secured by them any of the Indian Rly. along with performancestatement of this item. 7. Railway reserves the right to place the orders for part quantity on more than one source and also to take delivery ininstallments. 8. Tenderer must indicate monthly delivery schedule9. Other terms &conditions are as per Tender condition Annexure A & B along with amendments/modification if any,available on home page of COS/WCR under Documents/COS-WCR documents in the IREPS website10. IRS conditions of contract [latest amendment] will be applicable.

Wash hand sink 'D' type to Drg. No. C/LF-1885, Alt-6.(PL NO :30988226)


1988 NOS. 500 Nos. within 45 days,next 500 Nos. within 90days & balance within180 days.

Total Quantity 1988






MODIFIED BODY SIDE STANCTION FORBOXN WAGON COMPLETE ASSEMBLYTO W/BF-1114/K Alt.-1.(PL NO :38987533)

DY.CMM/KOTA 150 NOS. WITHIN 03 MONTHS.

Total Quantity 150






Hand wheel for BOXN HL Wagon.WD-09057-S-01 Alt.2 or latest, Item No.1 PartDrg.No.WD-96031-S-1 Alt-Nil or latest.(PLNO :38124269)


1200 NOS. 50% WITHIN 45 DAYS &BALANCE WITHIN 03MONTHS.

Total Quantity 1200






Guide with closing plate for axle box guidearrangment to Drg. no.T-0-3-670, ITEM 1 &4,COL.1 ALT.2 & g.(PL NO :30030225)


682 NOS. 50% within 45 days &balance within 04months.

Total Quantity 682






SET OF ITEMS FOR ANTI CLIMBING ACPARRANGEMENT (TOTAL 21 ITEMS INONE SET) AS PER ICF/SK/WGSRJ 2-3-5-203, ALT-C AND CRW/SK-AB-62 (ITEMSAS PER LIST ENCLOSED)(PL NO:30988688)


716 SET Within 31.08.2012.

Total Quantity 716






Spring Plank for 'CASNUB BOGIES' toRDSO drg. no.- SK - 69594, ALT- 34 orlatest, Item -1.(PL NO :38982705)

DY.CMM/KOTA 169 NOS. WITHIN 03 MONTHS.

Total Quantity 169





1. The offer shall be kept valid for acceptance for a minimum period of 90 days from the date of opening of the tender. Incase the tenderer stipulates validity period of less then 90 days, the offer may be treated as unresponsive and liable to beignored. 2. INSPECTION BY RDSO. 3. This is an item controlled by RDSO and Railway reserves the right to order entire or bulk quantity from RDSO approvedsources. The status of firm shall be reckoned as on date of tender opening and not thereafter, unless changed because ofdowngrading/removal/suspension/banning.4. Bill paying officer is FA&CAO/WCR/JBP. 5. In cases of delays in contractual delivery, full LD will be levied as per IRS conditions of contract and being a contractualprovision no request for LD waival will be considered, notwithstanding any past instances of such waiver or levy of token LD. 6. Firm should quote taxes and excise duly clearly, failing which it will be presumed that same are included in rates and willbe paid by firm. 7. The firm should submit the photocopy of the latest contract secured by them any of the Indian Rly. along with performancestatement of this item. 8. Railway reserves the right to place the orders for part quantity on more than one source and also to take delivery ininstallments. 9. Other terms &conditions are as per Tender condition Annexure A & B along with amendments/modification if any,available on home page of COS/WCR under Documents/COS-WCR documents in the IREPS website 10. IRS conditions of contract [latest amendment] will be applicable.

100 VA individual static invertor for LAPTOP/ MOBILE charging points as per RDSOSpecification No. RDSO/PE/SPEC/TL/0142-2010 (REV.0) of A type(Horizontal Type)(PLNO :45981747)


1474 NOS. 400 NOS WITHIN 02MONTHS AND BALANCEAFTER 03 MONTHSTHEREAFTER.

Total Quantity 1474





1.Delivery capacity per month should be clearly indicated by the firm, along with offered delivery period.2.Railway reserves the right to place the orders for part quantity on more than one source and also to take delivery ininstallment. 3.The Tenderer must quote Ex-works rate, FOR destination rate separately and freight charge must be quoted clearly andseparately for transportation by Rail/Road to consignees.4.No excise duty and sale tax on freight element will be payable. Vendors must indicate freight element separately otherwiseit will be assumed that vendors are absorbing/ bearing the freight themselves.5.IRS Conditions of contract latest amendment will be applicable.6.In case rate quoted by the firm are different in word and figures the lower of the two shall be taken for all-purpose duringtender finalisation simultaneously keeping the right to pass over the offer.7.Firms, who are not registered with this railway/NSIC for this item or registered for lower monitory limit, should agree todeposit 10% security deposit.8.INSPECTION BY RITES.9.Bill paying officer & Passing officer-FA&CAO/WCR/JBP.10.This is an item controlled by ICF and Railway reserves the right to order entire or bulk quantity from ICF approvedsources only. The status of firm shall be reckoned as on date of tender opening and not thereafter, unless changed becauseof downgrading/removal/suspension/banning.11.Other terms & conditions are as per Tender conditions Annexure A & B along with amendments/COS-WCR document inthe IREPS website.

SUPPLY AND SUPERVISION OFERECTION,COMMISSIONING ANDTESTING OF 132KV/27 KV,21.6 MVA,50HZONAN SINGLE PHASE TRACTIONPOWER TRANSFORMER AS PER RDSOSPECIFICATION NO.ETI/PSI/118(10/93)WITH A&C SLIP NO.1 TO 8 (JULY 2003)INCLUDING IMPROVEMENT INPERFORMANCE AND RELIABILITY OFTRACTION POWER TRANSFORMER VIDERDSO LETTER NO.ETI/PSI/TR/NP-VR/POLICY/2002 DATED 19.03.02 ORLATEST IF ISSUED,WITH FOLLOWINGSPARES. (1)BREATHER UNIT WITHSILICAGEL-01 NO. (2)BUCHHOLZ RELAY-01 NO. (3)TERMINAL CONNECTORS FORPRIMARY AND SECONDARY BUSHINGS -01 NO. (4)PRESSURE RELIEF DEVICE -01NO.

DY.CEE(S&C)KOTA

4 NOS. WITHIN 04 MONTHS

Total Quantity 4





1.Delivery capacity per month should be clearly indicated by the firm, along with offered delivery period.2.Railway reserves the right to place the orders for part quantity on more than one source and also to take delivery ininstallment. 3.The Tenderer must quote Ex-works rate, FOR destination rate separately and freight charge must be quoted clearly andseparately for transportation by Rail/Road to consignees.4.No excise duty and sale tax on freight element will be payable. Vendors must indicate freight element separately otherwiseit will be assumed that vendors are absorbing/ bearing the freight themselves.5.IRS Conditions of contract latest amendment will be applicable.6.In case rate quoted by the firm are different in word and figures the lower of the two shall be taken for all-purpose duringtender finalisation simultaneously keeping the right to pass over the offer.7.Firms, who are not registered with this railway/NSIC for this item or registered for lower monitory limit, should agree todeposit 10% security deposit.8.INSPECTION BY RITES.9.Bill paying officer-Dy.FA&CAO/C/WCR/KOTA & Passing officer-DEE/C/WCR/KOTA.10.This is an item controlled by RDSO and Railway reserves the right to order entire or bulk quantity from RDSO approvedsources only11.Other terms & conditions are as per Tender conditions Annexure A & B along with amendments/COS-WCR document inthe IREPS website.12. Payment term - 90% against Receipted challan signed by Gazatted officer & RITES Inspection Certificate and balance10% on successful installation and commissioning of transformer.13.SPECIAL CONDITIONS: Tender for this item is invited through e-procurement on line only therefore tenderers arerequested to quote through IREPS at website www.ireps.gov.in. Manual tender received against this tender will not beconsidered.

SUPPLY, INSTALLATION,TESTING ANDCOMMISSIONING OF 33/11 KV,5000 KVAOUT DOOR TRANSFORMER OF 3PHASE,50 Hz, DOUBLE COPPERWOUND, PLINTH MOUNTED, OFF LOADTAP CHANGER, DELTA-STAR(VECTORGROUP DYN-11) ENERGY EFFICIENTTRANSFORMER,THE MINIMUM NO LOADLOSS SHOULD NOT EXCEED 4 KW ANDMAXIMUM LOAD LOSS SHOULD NOTEXCEED 21 KW.THE TRANSFORMERSHOULD BE SUPPLIED COMPLETE WITHALL ACCESSORIES AS PERSPECIFICATION ATTACHED ATANNEXURE-1.MAKE-ABB,BHEL,CGL,NGEF,SIEMENS,VOLTAS,TESLA,ECE VOLTAMP,ANDREWYULE,EMCO,ALSTHOM,BHARATBIGLEE,GEC,TELK OR SIMILAR

SE/Ele/Cons/HQ/JBP

2 NOS. WITHIN 04 MONTHS

Total Quantity 2





1.Delivery capacity per month should be clearly indicated by the firm, along with offered delivery period.2.Railway reserves the right to place the orders for part quantity on more than one source and also to take delivery ininstallment. 3.The Tenderer must quote Ex-works rate, FOR destination rate separately and freight charge must be quoted clearly andseparately for transportation by Rail/Road to consignees.4.No excise duty and sale tax on freight element will be payable. Vendors must indicate freight element separately otherwiseit will be assumed that vendors are absorbing/ bearing the freight themselves.5.IRS Conditions of contract latest amendment will be applicable.6.In case rate quoted by the firm are different in word and figures the lower of the two shall be taken for all-purpose duringtender finalisation simultaneously keeping the right to pass over the offer.7.Firms, who are not registered with this railway/NSIC for this item or registered for lower monitory limit, should agree todeposit 10% security deposit.8.INSPECTION BY RITES.9.Bill paying officer-Dy.FA&CAO/C/WCR/JBP & Passing officer-Dy CEE/C/WCR/JBP.10.QUALIFYING CONDITIONS:-See on separate page.11.Other terms & conditions are as per Tender conditions Annexure A & B along with amendments/COS-WCR document inthe IREPS website.12. Payment term :- 80% against Receipted challan & RITES Inspection Certificate and balance 20% on successfulinstallation and commissioning of transformer on submission of BG. for 10% of the value of P.O. as performance/ guarantee.13.SPECIAL CONDITIONS: Tender for this item is invited through e-procurement on line only therefore tenderers arerequested to quote through IREPS at website www.ireps.gov.in. Manual tender received against this tender will not beconsidered.

Supply and Installation of MCP cardsuitable for Tadiran Flexicom-6000Exchange installed in DRM officecompound Jabalpur WCR. Tchnical Spec.-MCP ATS card (Tadiran make) Boot devicesLED flash, Serial port, 9 pin D-type KBOterminal-0, clok ratio-50% - 6205%, VersionGC 1.4:22.1:V4.D, S/W version:- 14.67.31-512 MB, Thermal duty cycle 87.5%, PRImaster Auto.

SSE/TELE/M/JBP

1 NOS. within 2 months.

Total Quantity 1





1] INSPECTION BY RITES. 2] Interse position shall be decided itemwise consignee wise. 3] Offer received without tendercost/documentary evidence regarding exemption from submitting the tender cost, shall be summarily rejected. Please refertender condition no. 4.1 of WCR tender document-Annexure-A in this regard. 4] Railway reserves the right to place theorders for full or part quantity on more than one source and also to take delivery in installment. 5] Delivery period should beclearly indicated in the offer. 6] Firm should quote FOR destination/Free at destination price. Free delivery by Road direct toconsignee will be preferred. 7] SPECIAL CONDITIONS - Tender for this item is invited through e-procurement on line onlytherefore tenderers are requested to quote through IREPS at website www.ireps.gov.in Manual tender received against thistender will not be considered. 8] IRS conditions of contract with latest amendment will be applicable. Other terms andconditions shall be as per Tender condition Annexure A and B along with amendments/modification if any, available onhome page of COS/WCR under Documents/COS-WCR documents in the IREPS website. 9] Firm must carefully examinethe contents of PO and in case of any discrepancy noticed, shall make a representation within 15 days of the date of PO.Any representation thereafter for DP re-fixation shall be summarily rejected.10] Bulk or entire quantity will be purchased fromfirms having past supply performance.

SUPPLY OF SMPS BASED INTEGRATEDPOWER SUPPLY SYSTEM (IPS) RDSOSPECIFICATION NO.RDSO/SPN/165/2004/WITH AMENDMENT05 AS PER WCR DRAWING NO. WCR/N-HQ/IPS/LC GATE/08/03/ALT-1. THELATEST AMENDMENT IN FORCE ON THEDATE OF OPENING OF TENDER WILL BEAPPLICABLE.

SSE/SIG/KTTNORTHSSE/SIG/M/DMOSSE/SIG/M/JBP

22

4

6

NOS.

NOS.

NOS.

3 TO 4 MONTHS.

3 TO 4 MONTHS.

3 TO 4 MONTHS.

Total Quantity 32





1] INSPECTION BY RDSO. 2] This is an item controlled by RDSO and Railway reserves the right to order entire or bulk quantity from RDSO approvedsources only. The status of firm shall be reckoned as on date of tender opening and not thereafter, unless changed becauseof Downgrading- removal-suspension-banning. 3] Interse position shall be shall be decided itemwise consignee wise.4] Offer received without tender cost/documentary evidence regarding exemption from submitting the tender cost, shall besummarily rejected. Please refer tender condition no. 4.1 of WCR tender document-Annexure-A in this regard. 5] Railway reserves the right to place the orders for full or part quantity on more than one source and also to take delivery ininstallment.6] Delivery period should be clearly indicated in the offer.7] Firm should quote FOR destination/Free at destination price. Free delivery by Road direct to consignee will be preferred.8] SPECIAL CONDITIONS - Tender for this item is invited through e-procurement on line only therefore tenderers arerequested to quote through IREPS at website www.ireps.gov.in Manual tender received against this tender will not beconsidered.9] IRS conditions of contract with latest amendment will be applicable. Other terms and conditions shall be as per Tendercondition Annexure A and B along with amendments/modification if any, available on home page of COS/WCR underDocuments/COS-WCR documents in the IREPS website. 10] Firm must carefully examine the contents of PO and in case of any discrepancy noticed, shall make a representationwithin 15 days of the date of PO. Any representation thereafter for DP re-fixation shall be summarily rejected.

LONG TRAVEL WHEEL FOR EOT CRANEAS PER DRG. NO. CRW/SK-896(ATTACHED)

Sr. SectionEngineerMILLWRIGHT BPL

8 NOS. WITHIN 90 DAYS

Total Quantity 8





1-INSPECTION BY RITES. 2. PAYMENT TERMS: AS PER IRS .3-No any concessional sales tax form'C 'or 'D 'provided byRly. 4. Other terms and conditions are as per Tender condition Annexure A and B along with amendments-modification ifany, available on home page of COS-WCR under Documents-COS-WCR documents in the IREPS website.5. IRS conditionsof contract [latest amendment] will be applicable.

Cut Piece cloth of 250 cms length for FullSleeves Shirt, Woven shirting made ofpolyester and cotton blend confirming tospecification no. IS 15852/2009 except forsoil release efficiency test and limited flamespread index test. Width: 91 cm excludingselvedges. Shade : DARK GREY.Construction particulars a) Nominal count ofwarp yarn 50s (20 Tex X 2) b) Nominalcount of weft yarn 50s (20 Tex X 2) c)Threads per Decimeter -Warp 440 d)Threads per Decimeter-Weft 360 e) Mass :102 gm / M2 f) Fibre composition Polyester67 PERCENT g) Fibre composition Cotton33 PERCENT h) Weave:Plain.Manufacturer's name to be woven onboth sides of selvedges throughout thelength of the cloth, it should be clearlyvisible. Each piece shall be packed inseparate resealable polythene pack of size12' x 15' of 40 micron thickness. "WESTCENTRAL RAILWAY" and the manufacturename with month and year of manufacturingshould be printed on each pack.(PL NO:79984009)

SMM-D(GSD)BPL

6895 NOS. WITHIN 60 TO 90 DAYS

Total Quantity 6895





1-INSPECTION BY RITES/DQA. 2. PAYMENT TERMS: AS PER IRS 3-Bill Paying/Passing Officer- FA&CAO/WCR/Jabalpur.4- No any concessional sales tax form 'C' or 'D' provided by Rly.5. Other terms and conditions are as per Tender conditionAnnexure A and B along with amendments-modification if any, available on home page of COS-WCR under Documents-COS-WCR documents in the IREPS website.6. IRS conditions of contract [latest amendment] will be applicable. 7.Eligibility Criteria: All the tenderer should be registered with DGS and D for the item with specific reference eligibility criteriastipulated in this tender. However NSIC registration will be accepted only if it is based on inspection report from QA wing ofDGS and D. Since this item included in the list of complaint prone items. NSIC registration should clearly indicate that thefirm complies with Eligibility Criteria requirement as applicable and the registration is based on QA wing inspection report.The tenderer shall furnish complete address of their weaving and processing units. Tenderes should also indicate that whatlogo they will weave on the selvedges as their name/trade mark which will not be allowed to change during the currency ofthe contract.

Cut Piece cloth of 275 cms length for H/SBUSH SHIRT Woven suiting made ofpolyester and cotton blend confirming tospecification no. IS 15853/2009 except forsoil release efficiency test and limited flamespread index test. Width: 91 cm excludingselvedges. Shade: DARK GREY.Construction particulars: (a) Nominal countof warp yarn 30s/2 (20 Tex X 2). (b) Nominalcount of weft yarn 30s/2 (20 Tex X 2). (c)Threads per Decimeter -Warp 260. (d)Threads per Decimeter-Weft 190.(e) Mass190 gm / M2.(f) Fiber composition Polyester67 PERCENT.(g) Fiber composition Cotton33 PERCENT.(h) Weave:PlainManufacturer's name to be woven onboth sides of selvedges throughout thelength of the cloth, it should be clearlyvisible. Each piece shall be packed inseparate polythene pack of size 12' x 15' of40 micron thickness with resealable."WEST CENTRAL RAILWAY" and themanufacture name with month and year ofmanufacturing should be printed on eachpack.(PL NO :79980430)

SMM -D(GSD)BPL

7107538

NOS.NOS.

WITHIN 90 DAYSWITHIN 90 DAYS

Total Quantity 7645





1-INSPECTION BY RITES/DQA. 2. PAYMENT TERMS: AS PER IRS 3-Bill Paying/Passing Officer- FA&CAO/WCR/Jabalpur.4- No any concessional sales tax form 'C' or 'D' provided by Rly.5. Other terms and conditions are as per Tender conditionAnnexure A and B along with amendments-modification if any, available on home page of COS-WCR under Documents-COS-WCR documents in the IREPS website.6. IRS conditions of contract [latest amendment] will be applicable. 7.Eligibility Criteria: All the tenderer should be registered with DGS and D for the item with specific reference eligibility criteriastipulated in this tender. However NSIC registration will be accepted only if it is based on inspection report from QA wing ofDGS and D. Since this item included in the list of complaint prone items. NSIC registration should clearly indicate that thefirm complies with Eligibility Criteria requirement as applicable and the registration is based on QA wing inspection report.The tenderer shall furnish complete address of their weaving and processing units. Tenderes should also indicate that whatlogo they will weave on the selvedges as their name/trade mark which will not be allowed to change during the currency ofthe contract.

Cut Piece cloth of 225 cms length for HalfSleeves Shirt, Woven shirting made ofpolyester and cotton blend confirming tospecification no. IS 15852/2009 except forsoil release efficiency test and limited flamespread index test. Width: 91 cm excludingselvedges. Shade : ORANGE Constructionparticulars a) Nominal count of warp yarn50s (20 Tex X 2) b) Nominal count of weftyarn 50s (20 Tex X 2) c) Threads perDecimeter -Warp 440 d) Threads perDecimeter-Weft 360 e) Mass : 102 gm / M2f) Fibre composition Polyester 67PERCENT g) Fibre composition Cotton 33PERCENT h) Weave :Plain.Manufacturer'sname to be woven on both sides ofselvedges throughout the length of thecloth, it should be clearly visible. Eachpiece shall be packed in separateresealable polythene pack of size 12' x 15'of 40 micron thickness. "WEST CENTRALRAILWAY" and the manufacture name withmonth and year of manufacturing should beprinted on each pack.(PL NO :79990447)

SMM -D(GSD)BPL

17714 NOS. WITHIN 90 DAYS

Total Quantity 17714





1-INSPECTION BY RITES/DQA.2.PAYMENT TERMS: AS PER IRS 3-Bill Paying/Passing Officer-FA&CAO/WCR/Jabalpur.4- No any concessional sales tax form 'C' or 'D' provided by Rly.5. Other terms and conditions areas per Tender condition Annexure A and B along with amendments-modification if any, available on home page of COS-WCR under Documents-COS-WCR documents in the IREPS website.6. IRS conditions of contract [latest amendment] willbe applicable. 7. Eligibility Criteria: All the tenderer should be registered with DGS and D for the item with specific referenceeligibility criteria stipulated in this tender. However NSIC registration will be accepted only if it is based on inspection reportfrom QA wing of DGS and D. Since this item included in the list of complaint prone items. NSIC registration should clearlyindicate that the firm complies with Eligibility Criteria requirement as applicable and the registration is based on QA winginspection report. The tenderer shall furnish complete address of their weaving and processing units. Tenderes should alsoindicate that what logo they will weave on the selvedges as their name/trade mark which will not be allowed to changeduring the currency of the contract.

Heavy duty single ended ratcheting ringspanners in across flate size 24 mm, head45 to 55mm approx, thickness 20 to 28 mmapprox, OAL 350 to 400 mm approx.Resistant against corrosion, Durable innature. Make-Mekaster/Toolscraft orsimilar.

Heavy duty pipe wrenches of alluminiumalloy. Pipe capacity 1/2" min to 2" max, withweight 1.2+/-0.1 kg approx.Nominal size350mm+/-50 mm. Resistant againstcorrosion, as per IS 4003 Part-II. Maker-Makaster/MTC and similar.

Heavy duty pipe wrenches of alluminiumalloy. Pipe capacity 1/2" min to 2" max, withweight 1.2+/-0.1 kg approx.Nominal size350mm+/-50 mm. Resistant againstcorrosion, as per IS 4003 Part-II. Maker-Makaster/MTC and similar.




50

50

50

NOS.

NOS.

NOS.

WITHIN 02-03 MONTHS

WITHIN 02-03 MONTHS

WITHIN 02-03 MONTHS

Total Quantity

Total Quantity

Total Quantity

50

50

50





1-INSPECTION BY RITES.2.Bill Passing Officer- DY CEE/C/WCR/BHOPAL 3. Bill Paying Officer- DY. FA&CAO/C/WCR/BHOPAL 4-Payment Terms:AS PER IRS 5. In cases of delays in contractual delivery, full LD will be levied as per IRS conditions of contract and being acontractual provision no request for LD waival will be considered, notwithstanding any past instances of such waiver or levyof token LD. 6. Firm should quote taxes and excise duly clearly, failing which it will be presumed that same are included inrates and will be paid by firm. 7. The firm should submit the photocopy of the latest contract secured by them any of theIndian Rly. along with performance statement of this item. 8. Other terms and conditions are as per Tender conditionAnnexure A and B along with amendments-modification if any, available on home page of COS-WCR under Documents-COS-WCR documents in the IREPS website .9. IRS conditions of contract [latest amendment] will be applicable.10-Firm isrequired to deposit SD @10% of contract value prior to release of formal P.O.11.- Firm must upload all the tech. litrature,specn. details, and clause-wise compliance along with its offer, otherwise offer will be considered incomplete and liable tobe passed over.

PROCUREMENT OF SHOCK PULSETESTER MODEL T - 4000 OR SIMILARFOR CHECKING THE TM BEARING.

SR.SECTIONENGINEER/ELS/ ITARSI

1 NOS. within 03-04 months

Total Quantity 1





1-INSPECTION BY RITES.2-Payment terms:80% payment shall be made after receipt of material in good condition alongwith RITES I/C.The balance 20% payment shall be released after commissioning, acceptance by the consignee &submission of performance Bank guarantee for 10% value of the contract value in Standard format to cover the warrantyperiod plus six months claim period.3-Bill Paying Officer- Sr. DFM/WCR/Kota. 4-Bill passing Officer- Sr.DEE/TRS/TKD. 5-Validity Period:Offer must be valid for min.120 days from the date of opening.6-The tenderer must quote Ex-works rate andFOR destination Rate separately and freight charges must be quoted clearly and separately for transportation by Rail/Roadto each consignee,failing which their offer may be passed over 7-No Excise duty,sales tax and other taxes on freight elementwill be payable.8-Only OEM should submit the offer & if any authorised dealer is offering they should submit tender specificauthorization letter from their OEM covering warranty of the item.9-Tenderer must submit the copies of latest purchaseorders obtained by them for the tendered item from other Rly/ Production units other Govt.deptt Undertakings along with theiroffer.10-IRS Condition of contract (latest amdt.)shall be applicable.11-In case rates quoted by firm are different in words andfigures on overall,the lower one shall be taken for all purpose during tender finalization, simultaneously keeping the right topass over the offer.12-Guaranty/Warrantee as per specification enclosed .13-Offer without tender cost/EMD shall besummarily rejected.14-Firm is required to deposit SD @5% of contract value prior to release of formal P.O.within a two weekof release of adv.Accept. 15-No any concessional sales tax form'C'or 'D'provided by Rly.16-Firm must upload all the tech.litrature, specn. details, and clause wishcompliance along with its offer, otherwise offer will be considered incomplete andliable to be passed over.

Servo Press-150 RR of M/s IOC or BharatCompressor Oil-150 of M/s BPCL or Hycom150 P of M/s HPCL. Packed in 210 ltrs. innew Non returnable M.S Drum.(PL NO:80014975)

SMM-D (ELS)NEW KATNI JNSMM-D(D)ITARSISMM-D(D) NEWKATNI JNSMM-D(ELS)ITARSISMM/ELS/TKD

5670

14910

17850

3570

2520

LTR

LTR

LTR

LTR

LTR

Within 03 months.

Within 03 months.

Within 03 months.

Within 03 months.

Within 03 months.

Total Quantity 44520





1.The Railway reserves the rights to order full or bulk quantity to RDSO approved firms only.The status of the firm shall bereckoned as on the date of tender opening and not thereafter, unless in case of downgrading/removal/suspension /banning.2. Bill Paying & Passing Officer-FA&CAO/WCR/Jabalpur.3. No excise duty on freight element is Payable.4. INSPECTION BY Consignee against Manufacturer Test Certificate.5. IRS Conditions of contract latest amendment will be payable.6. No Octroi duty will be payable, only Octroi exemption certificate issued by Railway.7. Firm should quote FOR destination/Free at destination price.8. Railway reserves the right to split the quantity in two or more firms.9. Firm to offer on fixed price basis only & offer with PVC will be summarily rejected.10.Total 2520 LTRs to be supplied to SMM-D(ELS),NEW KATNI Jn.

Graphited Grease TO IS 408 Grade 0(This item is reserved to RDSO approvedfirms only) to IS Specn. NO. 408/1981Reaffirmed-93(PL NO :80981185)

SMM-D(GSD)BPL

53.61 MTS. Within 02-03 months.

Total Quantity 53.61





1.The Railway reserves the rights to order full or bulk quantity to RDSO approved firms only.The status of the firm shall bereckoned as on the date of tender opening and not thereafter, unless in case of downgrading/removal/suspension /banning.2. Bill Paying & Passing Officer-FA&CAO/WCR/Jabalpur.3. No excise duty on freight element Payable.4. INSPECTION BY RITES.5. IRS Conditions of contract with latest amendments shall be applicable.6. No Octroi duty will be payable, only Octroi exemption certificate will be issued by Railway, if required.7. Firm should quote FOR destination/Free at destination price.8. For evalution purpose rates (all inclusive) for each consignee (separately) will be the basis for deciding inter se ranking ofoffers.9. In case rates quoated by firm are different in words and figures,the lower one shall be taken for all purpose during tenderfinalization, simultaneously keeping the right to pass over the offer.10. Railway reserves the right to place full or bulk qty. order on manufacturers and to split the quantity in two or more firms.11.Bulk/entire quantity is reserved to be procured from RDSO approved sources only.

Bamboo seasoned straight solid 38 mm diax 3.05 mtrs. long for hammer shafts endsshould be cut at least 50 mm away fromknots.(PL NO :93010217)


2527 NOS. Within 02 to 03 Months

Total Quantity 2527





1. Inspection by RITES.2. Bill Passing and Paying Officer: FA&CAO/WCR/JBP.3. Firm has to submit details of the products specification vague/incomplete offers are likely to be ignored without anyreference.4. Delivery period should be clearly indicated in the offer letter.5. Railway reserves the right to place the orders for part quantity on more than one source and also to take delivery ininstallment. 6. Firm should submit copy of R.O./P.O. to supply of same/similar item to Railways.7. IRS conditions of contract with latest amendment will be applicable.8. Firm should quote for destination / free at destination price. 9. Firm must carefully examine the contents of PO and in case of any discrepancy noticed, shall make a representationwithin 15 days of the date of PO. Any representation thereafter for DP re-fixation shall be summarily rejected.