Upload
sepehrcc
View
223
Download
2
Embed Size (px)
Citation preview
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 1/14
Western Drilling Tools
Western Drilling Tools services the following drilling Industries: Construction Drilling
Tools, Environmental Drilling, Exploration Drilling Equipment, Geotechnical Drilling
Equipment, Geothermal Drilling Equipment,Mining Exploration Equipment, Oil & Gas DrillingEquipment, Seismic Drilling and Water Well Drilling Equipment. We do this by providing quality
drilling supplies and machine shop services at excellent value. Western Drilling Tools has grown to
become a leading manufacturer and supplier of high quality drilling supplies, tools and accessories.
We excel in designing, manufacturing, and distributing drilling tools as well as finding custom
solutions to complex problems.
The goods and services that Western Drilling Tools provides
to the water well drilling, oil & gas, mining exploration drilling, and construction drilling industries
includes a full and comprehensive line of drilling supplies, tools and accessories. Western Drilling
Tools also services these drilling industries with the support of a full machine shop.
Oil & Gas Industry Western Drilling Tools has been
servicing the oil and gas industries primarily in our capacity as a machine shop. We manufacture
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 2/14
many oil & gas drilling tools, oil & gas drilling equipment, oil drilling tools and completion tools for
some of the largest players in the game. We manufacture many varieties of standard and custom oil
tools and down hole tooling and components. In addition to manufacturing and machining oil tools
for our various clients we also supply a competent line up of down hole drilling tools and supplies.
Western Drilling Tools is an authorized distributor of premium quality deep hole drilling tools.
Air Swivels
Side Inlet - Air Swivel (Flushing Head) is a drilling tool attached to the top of the drill pipe, primarily
used for "reverse circulation" applications. Coinciding reverse circulation (RC) pipe and/or tubing are
connected with a compressor or pump to allow circulation of drilling mud, air or water.
A Flushing Head works by allowing the drill pipe to rotate freely while the side hose remains
stationary. In reverse circulation applications, an Air Swivel allows the cuttings to be flushed upward
into the pipe at the same time allowing cuttings to return through a customizable port through which
compressed air is blown.
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 3/14
View Details »View Details `
Casing
Whether you need casing to prevent
contamination of well zones, prevent unstable upper formations from caving in on your bore hole, a
strong upper foundation to continue drilling deeper or a smooth internal bore for installing production
equipment, Western Drilling Tools can supply casing drilling equipment for any of your drilling needs.
We specialize in construction industry drilling tools and custom drilling tools.
Drop Off Casing System
Through years of experience and development in close coordination with drillers, Western Drilling
Tools has developed the WDT Drop-Off Casing System. This casing advancement system is
perhaps the most cost effective way to set single use casing. In addition to relatively low cost this is
still a premium quality drilling tool capable of reaching astounding depths. It was designed to drill
concentric holes for single use or retrievable casing. The drop off ring has a larger diameter than the
casing. The guide device shoulders up to the casing shoe and the drop of ring is attached.
Advantages of the WDT DROP OFF SYSTEM
High rate of penetration means lower cost to the driller
Concentric drilling through any formation
Lots of standard and custom accessories
Made from high quality alloy steel
Easy bit changes
Simple design, one piece reamer and one piece guide device
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 4/14
Exceptional performance and ease of use
Excellent flushing and removal of cuttings
Compatible with most drill rigs
Made in North America to the highest quality standards
Core Drilling Tools Whether you are collecting a core sample for an oil sands project, an
environmental drilling application or for geotechnical drilling, Western Drilling Tools has the core
drilling supplies to maximize your drilling efficiency.
Core Pipe
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 5/14
At Western Drilling Tools, we believe your drilling products should be constructed from the best
materials available in a cost effective manner without sacrificing quality. We are experts at
manufacturing core drill pipe. The drill pipe is precision machined from extremely tough 4140 L80
steel for the pipe shafts and the connector ends are made from 4140 HT or QT100; this makes them
extremely durable, wear resistant and reusable.
Cross Over Subs
Cross over subs act as an intermediary between two dissimilar threads and are used to connect the
two. A cross over sub can also be used to protect other tooling in your drill string and since the cross
over sub (also known as saver sub) is the least expensive item in the drill string it can be designed towear before any other drilling component does.
Discharge Heads
Discharge heads, also called discharge swivels
and flushing heads, are mounted to the top of the drill rig and allow a path for cuttings to be
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 6/14
evacuated. Western Drilling Tools offers two styles of discharge heads: rotating bearing and sealed
rubber rotating.
Down Hole Hammer
When percussion orhammer drilling the percussion mechanism is called a DTH or down the hole hammer. This drilling
tool is located directly above the down hole hammer bit. The driller transfers weight to the bit through
the drill pipe as well as provides some rotation.
PDC Bits
PDC stands for Polycrystalline Diamond Compact which refers to the cutters on these drill bits. PDC
bits have exceptional rates of penetration when drilling and can out preform other bits in the right
conditions. The diamond cutters are 10 times stronger than steel but they are Brittle and can get
damaged in discontinuous formations. PDC bits love to drill through shale’s, salty clay stone,
concrete and sands. Avoid gravel and sand stone.
PDC Bits a are an excellent choice for expensive or very deep wells and particularlyexcel when drilling in soft to medium hard formations.
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 7/14
PDC bits can be constructed from steel bodies or matrix bodies. You will get a deeper hole out of a
Matrix Body but they cannot be repaired or re-tipped they may crack if the driller dynamically impacts
the bit. A steel body PDC bit is much tougher than a matrix body and will not crack.
TriCone Bits
The TriCone Bit is the most versatile drill bit on the
market. It is the go to drill bit in most styles of drilling. Whether you are drilling a water well or an oil
well, Western Drilling Tools has the Tri Cone Drill Bit for you.
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 8/14
Drill Collar
These thick walled, heavy steel tubular apply weight to
the bit. Western Drilling's drill collars typically have an outside diameter of 3 1/2” to 11” and a length
of 1’ to 30’ ft; they are machined from high strength alloy steel (AISI 4145H MOD ).
Drill Pipe
Whether you are drilling a simple, shallow well or an extremely deep hole in unfavorable formations,
Western Drilling Tools has the drill pipe and accessories to get the job done.
Western Drilling can manufacture drill pipe or any other component in a drill string to the
specification and needs of its customers including Custom Drill Pipes, Drill Pipe Equipment, Custom
Drilling Tools etc.
Drilling Supplies
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 9/14
A Shock Sub is a drilling tool used to suppress destructive vibrations in more expensive pieces of
drilling equipment. Western Drilling Tools supplies several styles and sizes of shock subs and
cushion subs.
Drive Shoes
Drive Shoes, also known as Casing Shoes and Barber Shoes, are welded or threaded to the end of
your casing and are used with all casing advancement systems. Threaded Casing Shoes are also
known as Casing Bits. All Drive Shoes or Casing Shoes are designed for rotary-percussive or rotary
only drilling.
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 10/14
Magnetic Fishing Tool
Western Drilling Tools has spent a lot of time designing a premium magnetic fishing tool that is also
very inexpensive. The drillers that have used this tool absolutely love it. It comes standard with a
removable reaming bit which helps to stabilize it while down the hole.
Over Shot
This
drilling tool is an Over Shot Fishing Tool. To construct this part, we manufacture it in a similar
fashion to the fishing spear. The over shot is precision CNC machined from hardened high alloy
steel and has a sharp internal thread profile. This fishing tool latches to the outside diameter of the
broken down hole drilling tool.
Fishing Spear
Our drilling supplies include three styles of down the hole fishing tools, the first two are a tapered
thread style. The fishing spear is a tapered down hole fishing tool that is designed to cut a thread
into the inside bore of the rotary drilling tubular. Western Drilling Tools' manufacturing process
specifies us to cut a sharp profile thread into case hardened 8620 high alloy steel.
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 11/14
Hammer Bits
Western Drilling Tools' Hammer Bits or DTH Button Bits range in size from 4" hole diameter upwards
(101.6mm) to 24” (609.6mm).
1. Flat Faced Hammer Bit
These hammer bits are excellent for drilling in medium to hard formations. These hammer bits
maintain average hole straightness but have an excellent penetration rate.
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 12/14
2. Convex Hammer Bit
Medium to hard ground formations are no problem for this DTH Hammer Bit. The DTH bit keeps
average hole straightness but drills at an excellent speed.
3. Drop Center Hammer Bit
These DTH Hammer Bits are great for drilling through medium to hard formations. Drop Center
Hammer Bits have excellent hole straightness with an average drilling rate of penetration.
4. Concave Hammer Bit
Concave Hammer bits are ideal for drilling through medium to hard formations. These DTH hammer
bits are known to keep an extremely straight hole with an average rate of penetration.
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 13/14
Hole Opener
Western Drilling Tools supplies a wide assortment of hole openers for many drilling applications. The
main body is constructed from 4130-4145 high alloy steel for incredible strength and toughness. The
WDT hole openers can drill through soft to hard formations and can come equipped with Mill ToothRoller Cone Bits or TCI (tungsten carbide insert) Roller Cone Bits. These hole openers can also
come with jet nozzles to improve cleaning and provide flow directly to the cutters.
Reverse Circulation Drilling
Reverse circulation drilling is similar to air core drilling. The cuttings are returned to the surface
through an inner tube and collected for later use. This type of drilling is done by either rotary drilling
or percussion drilling with the aid of a down hole hammer. Reverse circulation drilling is a highly
utilized drilling method for mineral exploration. RC is used to retrieve continuous samples from the
ground where a solid core is not needed.
8/12/2019 Western Drilling Tools
http://slidepdf.com/reader/full/western-drilling-tools 14/14
Sonic Drilling
WDT drilling supplies include a multitude of products for sonic
drilling rigs. Sonic drilling works by vibrating the drill string at incredibly high frequencies (over 50 Hz
). Once the resonant frequency is reached the procedure begins. This intense vibration causes the
drilling tools to expand and contract, most sonic rigs are manually tuned by the driller to the required
frequency. The equipment is capable of drilling up to 100m, 3 to 5 times faster than conventional
drilling without the use of mud or other lubricants. Western Drilling Tools supplies the drilling
components required to complete the hole.