Embed Size (px)
Citation preview
Features• Manufactured in accordance with AWWA C503 standard• (1) 4.5" Pumper nozzle (2) 2.5" Hose nozzles• Nozzle threads to NFPA 1963 standard• Flange to ANSI B16.1, Class 125 (6") Other types available upon request.• 250 PSI Working Pressure• -10°C to 82°C working temperature• Interior and exterior is e-coated to a dry film thickness of 0.6 mils minimum, then fusion bonded epoxy powder coated (FBE) corosion protection.
Notes: Design and material are subject to change without notice.
Schematic Drawing
Wet Barrel HydrantModel: LF-WBH
Material Specification
No. Component Material
1 Body Ductile iron A536 65-42-12
2 Pumper nozzle cap Cast ironA126 Class B 3 Pumper nozzle Bronze B62 C83600 4 Main valve Rubber NBR 5 Main valve holder Stainless steel AISI 304 6 Hose nozzle cap Cast iron A126 Class B 7 Hose nozzle Bronze B62 C83600 8 Stem Stainless steel AISI 304 9 Stem nut Bronze B62 C83600 10 Operating nut Bronze B62 C83600 11 O-ring Rubber NBR 12 Pumper nozzle gasket Rubber NBR 13 Hose nozzle gasket Rubber NBR
1Unit 8, Calibre Industrial Park, Laches Close, Four Ashes, Wolverhampton, WV10 7DZ, United Kingdom www.lifeco-uk.comT +44 1902 798 706 F +44 1902 798 679 E [email protected]
In line with our policy of continuous product improvement LIFECO reserves the right to modify specifications without prior notice.
