Upload
monu991
View
16
Download
0
Embed Size (px)
DESCRIPTION
engine
Citation preview
Advertise your Business Here
Browse | Placement Papers | Company | Code Snippets | Certifications | Visa Questions
Post Question | Post Answer | My Panel | Search | Articles | Topics | Errors
Testimonials Refer this Site Login | Sign Up
Categories >> Engineering >> Mechanical Engineering
CivilEngineering(3561)
MechanicalEngineering(3434)
ElectricalEngineering(14228)
ElectronicsCommunications(2496)
ChemicalEngineering(449)
AeronauticalEngineering(78)
BioEngineering
Question what is blow by and blow down phenomena in ic engine?
Question Submitted By :: Mechanical Engineering I also faced this Question!! Answer Posted By
Answers were Sorted based on User's Feedback
Answer# 1
Blow-by occurs when the explosion that occurs in yourengine's combustion chamber causes fuel, air and moistureto be forced past the rings into the crankcase. Yourengine's rings must maintain an excellent fit in order tocontain the pressure.
Blowdown is the amount of time/distance/degrees betweenexhaust port opening and transfer port opening.The absolute most accurate description of blowdown wouldbe... the amount of TIME between the exhaust and transferport openings. This "measurement" would of course only beaccurate at one rpm, so blowdown is commonly referred to indegrees of crank rotation.
Is This Answer Correct ? 24 Yes 2 No
kk
Oil Gas Jobs Engine Oil Boilers
Gas Engine Used Engines Oil Boilers
LikeLike ShareShare
what is blow by and blow down phenomena in ic engine? http://www.allinterview.com/showanswers/109959/what-is-blow-by-and...
1 of 3 3/21/2015 2:32 PM
(26)Metallurgy
(88)Industrial
Engineering(173)Instrumentation(2555)
AutomobileEngineering(125)
MechatronicsEngineering(39)
MarineEngineering(52)
Power PlantEngineering(100)
EngineeringAllOther (1260)
Answer# 2
Blow by: When the equal pressures at the top and bottom ofthe piston of an IC Engine exists it won't work and it willblast. To avoid this situation the blower is used at thebottom of the piston(crank case)ie., Creating negativepressure inside the cylinder.
blow down: time lap between fresh charge entering into thecylinder through inlet and exhaust through exhaust valve.
Is This Answer Correct ? 7 Yes 1 No
logachandran.v
Answer# 3
the escaping out of combustion gases through piston ringsto the sump/oil pan is known as blow by. these gases alsotakes out some contants of oil with them.
Is This Answer Correct ? 5 Yes 8 No
manoj yadav
OTHER MECHANICAL ENGINEERING INTERVIEW QUESTIONS
Question Asked @ Answers
what is friction? nhpc 10
how to control ovality in internal diameter 1
wht will happen if reciprocating compressor run in exactly opposite direction? tata 5
What will be the cause of the loose compression in a cylinder? rrb 1
which one of the following loading is considered for the design of axle. 1)bendingmoment only 2) twisting moment only 3) combined bending moment & torsion 4)combined action of bending moment & axial thrust
appsc 2
Why stress-strain diagram is not prepared by compressive testing instead oftesting component by tensile stress? 2
How to calculate the quantity of Grease applying in all bearing?is there any fixformula for this. 2
Lowest Rate Car LoanGet car loan @ 10.25%*. EMI starts from Rs. 1765/lakh. Apply online.
what is blow by and blow down phenomena in ic engine? http://www.allinterview.com/showanswers/109959/what-is-blow-by-and...
2 of 3 3/21/2015 2:32 PM
how can we improve the efficiency of marine ship? 1
what is bearing stress? 4
what is mean ovality?, how it is measured? greaves 10
what is reboiler? iocl 3
SAE-40.......? 5
For more Mechanical Engineering Interview Questions Click Here
Copyright Policy | Terms of Service | Site Map | Site Map | Contact Us |
Copyright 2015 ALLInterview.com. All Rights Reserved.
A L L I n t e r v i e w . c o m :: F o r u m 9 . c o m :: K a l A a j K a l . c o m
what is blow by and blow down phenomena in ic engine? http://www.allinterview.com/showanswers/109959/what-is-blow-by-and...
3 of 3 3/21/2015 2:32 PM