Who We Are ?

1. Wood, Steel & Aluminum Hardware Accessories

International Standards • EN Standard 500,000 Cycles • ANSI Standard 1,000,000 Cycles • UL Standard 100,000 Cycles EN Standards more restrictive compared to the other ones due to performance at the end of durability ( 500.000 cycles ) to be not below 80% ( for ANSI after 1Ml cycles same performance not requested ) but added value element in terms of quality

and product life

Durability

Part 1 Swing Solutions

Swing Door Solutions

1-Manual Swing Solutions

2- Automatic Swing Solutions

Glass Swing Door Solutions

• RP-TP • Visur • Beyond

• Universal • RP • EA

Different Glass Solutions

A- Universal Patch Most Commonly used Solution For standard applications

Different Patch Fittings

• thickness up to 19 mm • Max door width 1300 mm &Max height 2500mm • Max door weight 130 KG

B-Types of Rail Solutions

TP : door rails for center hung TA : door rails for offset hung • 76.5 mm width for glass thickness from 8 to 12 mm • 100 mm for glass thickness more than 13.5,15,17,21 mm

Using Rails If the weight higher than 130 kg or width >1300mmIn order to protect the door and avoid damage.

Note Fixing Without any Cutting out of Glass

C – Visur Solution

A decorative Solution for Glass double Action Doors Without any Visible Fixing.

From Bottom

• Concealed glass Door closer with transom in case of top Glass Panel ,RTS 85 EN 3 (95 cm&60 KG),back check Hold open at 90˚.

From Top

Assembly for the Visur Solution

Transom where RTS 85 Fixed in it Max Panel Width 1100mm.

Component of Visur Depth of installation 64 mm & diameter of bearing housing 126mm .

Glass Cutting Out

D – Beyond Solution Maximum safety and stability in the swing door systems that Preventing the risk of trapped fingers

• Suitable for Glass with thickness 10&12 mm • Max Panel width 1000 mm incase of fixing to glass • Max Panel width 1200 mm incase of fixing to wall

Short pivoting Rod

If length is more than 2200 mm we must use continuous pivoting rod

• Max Panel width 1000 mm incase of fixing to glass • Max Panel width 1200 mm incase of fixing to wall

continuous pivoting rod

D- EA Solution

Single action offset door, hinge to frame or integrated Glass incase of offset applications ( Room Server)

• Suitable for Glass thickness 8,10,12 mm • Max door width 1000 mm • Max door weight 80 KG

Assembly Drawing

Bottom Patch Top Patch

E-Tensor

Fixed to Glass Fixed to Wall

A Creatively Solution double action door hinge & Self closing For Glass Hold open at angle 90˚& self closing start from 80˚ even at 2°self closing occur .

• Max Door Weight 65 KG • Available for Glass thickness (8,10,12)mm • Min Door Panel Width is 700 mm & Max 1000 mm • 500,000 operating cycle test

Fixed to Wall Fixed to Glass

F- Frameless Pivoting Door

Short Pivot Continues Pivoting

• Suitable for Single and double action glass doors

• If Door Length is higher than 2 m you should use Continues Pivot

Product Range - Internal Doors

DORMA Studio Slim in form and elegant in design

DORMA Junior Office Reliable and multifunctional

DORMA Studio ARCOS Attractive accents in design

DORMA ARCOS Office Strong pieces in glass

Studio Rondo DORMA

DORMA Junior Office Classic

FLOOR SPRING (EUROPEAN STANDARD)

BTS 65 An inexpensive floor spring for double action doors Available in fixed size, EN 4 Max leaf weight 100 Kg Tested to EN 1154 Fixed hold open point at 90° CE marked

BTS 80 Designed for all types of door Available size EN3, EN4, EN5 Max leaf weight 300 Kg Backcheck as standard feature Adjustable hold open Number of optional accessories available for

this model Also available are 80F, 80EMB, 80FLB in EN4,

EN5 & EN6

BTS 75 V Adjustable size EN 1 – 4 Max leaf weight 120 Kg Suitalbe for Fire & smoke check doors Backcheck as standard feature Hold open point at 90° or 105° CE marked

CD 80

ED 100

ED 200

ED 250

Automatic Swing door operator

DORMA Swing door operator

CD80

ED200

ED180

CD400

DORMA Swing door operator

ED 100–Electro mechanical operator

Closing force: EN 2-4

Door width : 1100mm

Door weight : 100 kg

Standard Arm & Slide Arm

ED 250–Electro mechanic operator

Closing force: EN 4-6

Door width: 1600mm

Door weight: 250 kg

Standard Arm & Slide Arm

ED100 ED250

Accessories

Radar movement detectors, pushbuttons, card readers, radio control, electronic access control systems, proximity type access control systems, electric strikes, safety sensors for protection of personnel in the opening and closing range, wireless activators

Part 2 Sliding Solutions

Sliding Door Solutions

1-Manual Sliding Solutions

2- Automatic Sliding Solutions

DORMA MANET-Sliding Architectural hardware for furniture

Sliding Door system Can be fixed with Glass wall portions

• Wall or glassed fixed • 100 KG Max leaf weight • Decorative Solution

Suitable For Residential applications

Suitable For Residential applications Curved Sliding Manet

Product Range - Room Divider

DORMA AGILE 150 Flexible and high-power

DORMA RSP 80 The approved sliding door system for highest loads

DORMA AGILE 50 Ultra-versatile lightweight

DORMA RS 120 The approved sliding door system for highest loads

DORMA AGILE 150 Flexible and high-power

DORMA AGILE 50 Ultra-versatile lightweight

• No Glass Preparation • 150 KG Max leaf weight • Celling or wall fixing • Stainless finish or stain aluminum

Finish

• No Glass Preparation • 50 KG Max leaf weight • Celling or wall fixing • Stain aluminum Finish

DORMA RSP 80 The approved sliding door system for highest loads

• For Glass or timber Sliding Solution • Max leaf weight 120 KG • Tracked predrilled for ease fixing

DORMA RS 120 The approved sliding door system for highest loads

• For Glass or Timber Sliding Solution • Max leaf weight 80 KG • Tracked predrilled for ease fixing

ES 200

ES 200 EASY

ES 200 2D

EL 301

AL 401

DORMA Automatic sliding door operator

ES 400

ES 200

• Sliding Door Operator Can Be Carry Weight up to 1000 KG • You Can Get a battery Back up • Available with different Heights 100,150,200 mm • The difference between each operator in weight and applications

Operator technical data

Door Parameters • Panel width from 700 to 3000 mm • Passage height from 2100 to 3000 mm

Control Main items

Program Switch

Safety Sensor

Emergency Pushbutton

Motion Detector

On/Off Switch

Accessories

Light barrier

Rain Protection Cover

Remote Control

Key Switches

EL 301 & AL 401

DORMA sliding door operator

ES 200 Easy : 2 x 100 kg

ES 200 : 2 x 160kg

ES 200 2D : 2 x 130kg (escape)

ES 200 SST : 2x 100kg (breakout)

ES 400 : 1x 200 , 2x 125kg (hospital)

EL301 : 2 x 150kg (chain)

AL401 : 2 x 200kg (chain)

DORMA sliding door operator

ES200

ES200 Easy

ES200-2D

ST

TST

SST

RST

FFT

BST

DORMA complete door systems

Automatic telescoping sliding doors

Automatic sliding doors with breakout

Space-saver

Automatic folding doors

Curved sliding doors

Sliding doors

ST (Compelete Sliding Door Solution)

ST

ST ( operator With Breakout)

SST

TST

TST Telescopic Mechanism

RST Space Saver The system provide max passage width because of Sliding and swing Motion

• Max door width 2000 mm • Max door height 2300 mm

RST

KTV

KTV-ATRIUM

KTC

DORMA Revolving doors

Motion Sensor

Rotating ceiling

Door drive Safety sensor Canopy

Disabled access push button

Key switch

Safety contact strip

Door leaves

Side wall

Core

Revolving door layout

KTV (Varioline) and KTC (Comfortline)

Comfortline KTC 2 leaves – 3600, 4200,

4800, 5400 KTC 3,4 leaves – 3600, 4200,

4800, 5400, 6000, 6200 Varioline KTV Atrium –2000, 2200, 2400,

2600, 2800 (full glass door) KTV 3,4 – 2000 to 3800

(production in UAE)

KTV (Varioline) and KTC (Comfortline)

Manual - Manual Operation

Positioning - Manual push to start Servomatic - Door starts at low rpm Automatic I - Door activates as user approaches Automatic II - Door rotates at continuous rpm

Revolving door operation mode

Part 3 Timber

Solutions

Timber Door Solutions

A. Butt Hinges

• EN 1935 • CE mark • Fire Rated (45, 60, 90 min.) • 2 Ball Bearing & 4 All Bearing • 5 Knuckles • For wooden and metal doors • Up to 120 kg

• Different Dimensions • Different Sizes • Different Finishes • Square End and Round End • Removable Pin (RP) and Non

Removable Pin (NRP)

I. Hinges

• For Single Action Self-Closing Door • Different Sizes • Meets ANSI A156.17 • UL Listed • Stainless Steel • Fire rated

• For Double Action Self-Closing Door • Different Sizes • UL Listed • Meets ANSI A156.17 • Stainless Steel • Fire rated

B. Spring Hinge

C. LM Aluminum Hinges

• Door widths up to 1200 • Door weight up to 120kg • Easy to fix only 4 or 6

holes to drill • No visible screw

connections • Rugged and secure

attachment

D. Concealed hinge • For timber, steel or aluminum frames • For flush-fitting architectural structures • With a load capacity of 40 to 300 kg • With an opening angle of 180° • Different sizes • From high-quality interior doors to large, heavy-duty doors • Fire rated applications • Electrified Hinges • CE Mark

I. Mortise Locks European Range by Application

Timber Doors

200 SSS 304

NFR

200 CE SSS 304

FR

300 SSS 316

NFR

300 CE SSS 316

FR

Steel & Aluminum

Doors

700 NFR

700-F FR

500 NFR

500-F FR

• conforming to the technical requirements of DIN 18251 and EN 12209 • backset 55 mm, 60 mm, 65 mm, 70 mm, 80 mm • forend 20 mm, square / 20 mm, rounded / 24 mm, square / 24 mm, rounded • Satin stainless Dead bolt • Emergency Escape Locks • Narrow Stile Locks • Sliding Doors Lock

American Lockset

Euro profile Cylinder

Non Master key Master key

• 5-pin, 6-pin and 7-pin variants available. • Length: from 40 mm to 70 mm • Different Finishes • Different Functions (Double Profile, Half profile , Double with Thumb turn, Half with Thumb turn, and Toilet Cylinder) • 3 keys included

American Cylinder

Non Interchangeable Core Mortise Cylinders

Dummy and Thumb turn

Cylinders

Interchangeable Core Mortise Cylinders

Interchangeable Cores (SFIC)

• All Finishes Available • Master and Non master Key available

Lever Handles

Door Closers

Rack and Pinion Concealed Cam

Action

TS 77 TS 72

TS 83

TS 73 EMF TS 99 EMF

TS 97

TS 93

TS 90

ITS 96

RTS 85

OVERHEAD DOOR CLOSER (EUROPEAN STANDARD)

Features TS 68 TS 71 TS 72 TS 73 V TS 77 TS 83

Spring strength EN 2 / 3 / 4 EN 3 / 4 EN 2 – 4 EN 2 – 4 EN 3, 4 EN 2 – 6, 7

External door opening No No No No No Yes

Fire & smoke check doors No No No Yes No Yes

Non handed Yes Yes Yes Yes Yes Yes

Arm type Slim line Standard Standard Standard Flat form

Standard Standard Flat form

Closing speed adjustment 180° – 15 °

15° – 0° 180° – 15 °

15° – 0° 180° – 15 °

15° – 0° 180° – 15 °

15° – 0° 180° – 20 °

20° – 0° By valve

Latching action By valve At arm At arm At arm By valve At arm

Back check No No No >At valve No >At valve

Delay action No No No No No Optional

Hold open Optional Optional Optional Optional Optional Optional

Certified to EN 1154 EN 1154 EN 1154 EN 1154

CE marked EN 1154 EN 1154

Weight 1.4 Kg 1.2 Kg 1.2 Kg 1.3 Kg 1.3 Kg 3.3 Kg

Miscellaneous

Panic Devices

PHA 2000 AD 4000

PHA 3000 Exit pad

From the back side you can control the door by this handle

Thank You