Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
LAURI RASIMUS
WOOD
METAL
3D-DESIGN
PORTFOLIOWHO’s
Lauri Rasimus
Wood Designer 2013-2016 (Kyamk University of applied sciences)
Bachelor of Business - International Business(Saimaa University of Applied Sciences 2008)
Phrase: “Not until the bird jumps to it’s wings can it fly”
[email protected] /+358 40 808 0417
Interested in furniture design, interior and environmental design and wood in architecture...
LAURI RASIMUS
WOOD
METAL
3D-DESIGN
SALAD HANDLESWOOD
Design started from triangular spoon, to make it more interesting I designed hole to the other spoon.
Made from pirch
LAURI RASIMUS
WOOD
METAL
3D-DESIGN
CHAIR “Rocking”WOOD
Designed to be made with legs that are at the same time arm rests, but due to lack of time and luck the design was such that it is natural to use it with out legs as modern rocking chair.
Chair will also get some padding in the future, it is included in the design, but not yet made.
LAURI RASIMUS
WOOD
METAL
3D-DESIGN
Studying shapesWOOD
Our assignment was to study shapes, like agres-sive hard and rough againts welcoming soft and light.
One of the block that I started to shape became an interesting candle holder.
LAURI RASIMUS
WOOD
METAL
3D-DESIGN
stoolWOOD
Design a piece of furniture or something to Sauna.
The base idea for the stool was ser-ration of the wooden beams.
LAURI RASIMUS
WOOD
METAL
3D-DESIGN
light fixtureWOOD
Modelstudio, designing a lamp. Idea from a cross and focus to design lamp that gives softer light e.g. to bed room.
LAURI RASIMUS
WOOD
METAL
3D-DESIGN
SeatMETAL
As our introduction to metal works we needed to design and produce a seat to kitchen.
Form of the wooden seating part makes this more interesting and also if you need to use this seat for stepping the design makes this possi-ble.
LAURI RASIMUS
WOOD
METAL
3D-DESIGN
3D-DESIGN
When designing I like to use Solidworks for my designs, I like the possibility to change the dimensions if needed.
Here is one example I designed to fingerjoint exhibition “Uudet syyt” 04/2014 arranged by Kyamk and Propuu in Lahti, Finland.
The joint was made with CNC machine accord-ing to my sketching. I made the table and joint 2 legs together with 3 threaded rods and bolts.
Idea of X-foot was also to be able to stack them and use as sides for a shelf.
I can also use Rhinoceros 3D with V-Ray for designing and rendering.
LAURI RASIMUS
WOOD
METAL
3D-DESIGN
3D-DESIGN
Grasshopper - chair
Stool for short seating, idea from a wave be-came a narrow chair that can be used in multi-ple ways.
Designed for public areas like bank counter etc for short time resting.