Wild Well Control • 2202 Oil Center Court • Houston, TX 77073 • Tel: +1 281-784-4700 • www.wildwell.com

Wild Well Control is proud to offer WellCONTAINED Subsea Containment Solutions to the industry. Based on over 36 years of conventional and subsea well control experience, we are able to provide a truly comprehensive solution to global deepwater well control incident prevention and response.

The WellCONTAINED system of services includes contingency planning and response from Source Control Emergency Response Planning (SCERP) through field deployment of our “ fit for purpose” system capping a subsea uncontrolled well.

The components of WellCONTAINED will assist operators in the prevention, preparation, response and recovery from a deepwater well control event.

Components of WellCONTAINED Subsea Solutions: • Source Control Emergency Response Planning (SCERP) • Technical Planning, Drill/Exercise & Response Support • Complete Global Response Equipment Package • Relief Well Planning & Well Kill Modeling • Firefighting & Well Control • Incident Command Structure & Response Training • Well Control Training

Subsea Containment Equipment

The WellCONTAINED subsea containment system of equipment is an integrated response system that is built and ready to respond to subsea well control incidents worldwide. The system includes a dedicated subsea capping stack that is specifically designed for capping operations. The complete capping stack is modular and allows for flexibility in the arrangement of the rams and drilling spool. The stack can be deployed on a wireline or drillpipe. Additional equipment in the WellCONTAINED package includes the 6 hydraulic shears for debris clearing, subsea dispersant injection equipment, and Wild Well Control’s source control management system of documents detailing well intervention procedures and operational support information.

The WellCONTAINED equipment package covers the critical aspects for well capping, containment, and collection designed for 10,000 ft water depth. The equipment package includes a set of various wellhead / capping stack hydraulic connectors that adapt to most subsea connectors. The capping stack is designed for both well containment (shut in the well), or for diversion and collection. The containment takes place using the three sets of rams. The collection is achieved by using the four way drilling spool with gooseneck connectors. The capping stack is maintained in transportable sizes for immediate deployment from Aberdeen, UK through vessels and air charter. A 50 GPM capacity subsea hydraulic power unit (SHPU) provides power and uses an environmentally friendly fluid to hydraulically function the capping stack and shears. The SHPU is capable of pumping hydrate inhibitors directly into the capping stack. For the debris clearing activities, the 2500 series shears have successfully cut drilling riser at a water depth of 5,000 ft. All subsea equipment shall have DNV certification.

WellCONTAINED is an engineered response package designed to manage well control events from the initial response to the dispersant application, debris removal, and installation of the capping stack. With over 36 years of well intervention experience, WWC personnel are committed to helping operators with rig management and emergency response efforts. Operators are invited to join the WellCONTAINED Subsea Containment Solutions.

Access to the WellCONTAINED system equipment requires a special Equipment Access Agreement, in addition to an MSA, between the operator and Wild Well Control. Due to the heavy capital investment required, there are associated annual fees for the Equipment Access Agreement. The WellCONTAINED system equipment will be for the exclusive use of those operators that are participants in the Equipment Access Agreement.

CAPPING ASSEMBLY – LONG TERM CAPPING STACK

Blowout Preventer, 18 3/4” 15K, CIW Type TL, Single Ram Design, with ST Locks, with Blind/Shear Rams Installed

Blowout Preventer, 18 3/4” 15K, CIW Type TL, Double Ram Design, with ST Locks, with Blind/Shear Rams Installed

Drilling Spool, 18 3/4” 15M with 4 – 4 1/16”15M Outlets with Double 3 1/16” 15K Valves, Subsea 3 1/16” 15K Choke Assembly, Vertical Connectors

Temperature and Pressure Sensors

Subsea Hydraulic Power Unit, 50 GPM, API 17H Hot Stabs, Hoses to Hydraulic Shear / Capping Stack

Lot upper and lower Subsea Connectors Qty of (2) 18 3/4” HC ConnectorsQty of (1) 18 3/4” H4 Connectors

Control Panel, API 17H hi-fl ow Hot Stabs

Set Modularized Frames for Deployment / Transport

DEBRIS CLEARING PACKAGE

WWCI / Subsea Hydraulic Shear, Model 2500, 46” Opening

WWCI / Subsea Hydraulic Shear, Model 660, 32” Opening

DISPERSANT INJECTION PACKAGE

Distribution Manifold

3,527 ft. of 1” ID Chemical Hose,Applicators and Hot Stabs

Subsea Coil Tubing Connector

Clump Weight and Routing Manifold

NOTE: The Dispersant Injection Package will require a third party Coil Tubing unit for the transmission of the dispersant to the Subsea Distribution Manifold.

Equipment Package

Wild Well Control’s Global Subsea Well Containment System