Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
1
Wind turbine on grid inverter
Product advantages:
◆ Using IGBT from Mitsubishi company as the power components
◆ Using American ATEMEL company microprocessor as figure controller
◆ Perfect protection and warning functions
◆ Wind turbine MPPT technology, real-time tracing wind turbine max. output power
◆ Disturbance detection technology, anti-island control
◆ Circuit frame compact, Max. Efficiency≥94%
◆ Outdoor stainless steel shell, fully sealed installation
◆ Input voltage within the broad, the maximum reach 1150VDC
◆ With RS485/RS232, Ethernet, GPRS (optional) interfaces, remote data collection and surveillance
2
◆ Pure sine wave output, automatic synchronization grid connected, non-polluting to the power grid, no
impact
◆ Inverting current close-cycle control, power to control and adjustable
◆ Big-screen English LCD, perfect display, interface-friendly
3
1KW-3KW On Grid Wind Inverter Data Sheet
Model AONI-1KVA AONI-3KVA
Rating capacity 1 KVA 3 KVA
Rating AC output power 1KVA 3KVA
Max. AC output power 1.2KVA 3.6KVA
Isolation Low frequency transformer isolation
Recommending wind turbine power 1.2KVA 3.6KVA
Max. AC open circuit voltage 400VDC
MPPT range 100-350VDC 100-350VDC
Max. DC Input current 10A 20A
DC connecting mode In-line waterproof terminal
Max. Efficiency 94%
Euro efficiency 92%
Allowing network voltage range (single phase) 180~265VAC
Allowing network frequency range 50HZ±2%&60HZ±2%
Total current waveform distortion factor <3%
Power factor ≥0.99
Internal power consumption an night <10W
Comm. Interfaces RS485/RS232
electrical insulating performance 1500Vac,1minute
4
Using environment temperature -25~+60℃
Using environment humidity 0~100%
Protection
Input short voltage、over voltage、opposing
connection,output over current、 short
circuit、over heat etc.
Cooling method Air cooling
Noise <40dB
Protection class IP20(indoor)、IP65(outdoor)
Width ×depth ×height(mm) 300*150*500 350*200*500
Weight (kg) 25 45
5
5KW On Grid Wind Inverter Technical Data Sheet
Model AONI-5KVA
Rating capacity 5KVA
Rating AC output power 5KVA
Max. AC output power 6KVA
Isolation Low frequency transformer isolation
Recommending wind turbine power 6KVA
Max. AC open circuit voltage 450VDC
MPPT range 150-400VDC
Max. DC Input current 25A
DC connecting mode In-line waterproof terminal
Max. Efficiency 94%
Euro efficiency 92%
Allowing network voltage range (single phase) 180~265VAC
Allowing network frequency range 50HZ±2%&60HZ±2%
Total current waveform distortion factor <3%
Power factor ≥0.99
Internal power consumption an night <10W
Comm. Interfaces RS485/RS232
electrical insulating performance 1500Vac,1minute
Using environment temperature -25~+60℃
Using environment humidity 0~100%
Protection
Input short voltage、over voltage、opposing
connection,output over current、short circuit、
over heat etc.
Cooling method Air cooling
Noise <40dB
Protection class IP20(indoor)、IP65(outdoor)
Width ×depth ×height(mm) 400*250*500
Weight (kg) 60
6
10KW On Grid Wind Inverter Technical Data Sheet:
Model AONI-10KVA
Rating capacity 10 KVA
Rating AC output power 10 KVA
Max. AC output power 12 KVA
Isolation Low frequency transformer isolation
Recommending wind turbine power 12 KVA
7
Max. AC open circuit voltage 780VDC
MPPT range 200~780VDC
Max. DC Input current 50A
DC connecting mode Connecting terminal
Max. Efficiency 94%
Euro efficiency 92%
Allowing network voltage range (three phase) 320~440VAC
Allowing network frequency range 50HZ±2%&60HZ±2%
Total current waveform distortion factor <3%
Power factor ≥0.99
Internal power consumption an night <10W
Comm. interfaces RS485/RS232
electrical insulating performance 1500Vac,1minute
Using environment temperature -25~+60℃
Using environment humidity 0~100%
Protection
Input short voltage 、 over voltage 、 opposing
connection,output over current、short circuit、over
heat etc.
Cooling method Air cooling
Noise <50dB
Protection class IP20(indoor)、IP65(outdoor)
Width ×depth ×height(mm) 600*500*1000
Weight(kg) 150
8
9
20KW On Grid Wind Inverter Technical Data Sheet
Type AONI-20KVA
Nominal capacity 20KW
Rated AC output power 20KW
Max. AC output power 22KW
Isolation Power frequency transformer
Recommend the fan power 10KW
The largest dc open circuit voltage 780Vdc
MPPT range 200~780Vdc
Max. DC Input current 100A
Max. Efficiency 94%
Euro efficiency 92%
Allow the grid voltage range(three phase) 310~450Vac
Nominal AC frequency 47.5Hz-51.5Hz
The total current waveform distortion rate <3%
Power factor ≥0.99
Communication interface (optional) RS485/RS232
Work environment temperature -25℃~+55℃
Relative humidity 0~95% no condensing
Protection Input short voltage, over voltage, connecting
contrary, output over current, short circuit, over
heat etc. Cooling method Controlled forced-air cool
Noise <50dB
Degree of protection IP20
Size(W*L*H) mm 650*610*1560
Weight(kg) 300
10
11
30KW On Grid Wind Inverter Technical Data Sheet:
Model AONI-30KVA
Rating capacity 30 KW
Rating AC output power 30 KW
Max. AC output power 33 KVA
Isolation Low frequency transformer isolation
Recommending wind turbine power 20 KW
Max. AC open circuit voltage 780VDC
MPPT range 200~780VDC
Max. DC Input current 150A
DC connecting mode Connecting terminal
Max. Efficiency 94%
Euro efficiency 92%
Allowing network voltage range(three phase) 310~450VAC
Allowing network frequency range 50HZ±2%&60HZ±2%
Total current waveform distortion factor <3%
Power factor ≥0.99
Comm. interfaces RS485/RS232
electrical insulating performance 1500Vac,1minute
Using environment temperature -25~+60℃
Using environment humidity 0~95% , no condensation
Protection Input short voltage、over voltage、opposing connection,
output over current、short circuit、over heat etc.
Cooling method Air cooling
Noise <50dB
Protection class IP20(indoor)
Width ×depth ×height(mm) 800*600*1800
Weight(kg) 400
12
50KW-100KW On Grid Wind Inverter Technical Data Sheet
Model AONI-50KVA AONI-100KVA
Rating capacity 50 KVA 100 KVA
Rating AC output power 50 KVA 100 KVA
Max. AC output power 60 KVA 120 KVA
Isolation Low frequency transformer isolation
Recommending wind turbine power 60 KVA 120KVA
Max. AC open circuit voltage 780VDC 780VDC
MPPT range 400~780VDC 400~780VDC
Max. DC Input current 125A 250A
DC connecting mode Connecting terminal
Max. Efficiency 94%
Euro efficiency 92%
Allowing network voltage range(three phase) 320~440VAC
Allowing network frequency range 50HZ±2%&60HZ±2%
Total current waveform distortion factor <3%
Power factor ≥0.99
Internal power consumption an night <10W
Comm. interfaces RS485/RS232
electrical insulating performance 1500Vac,1minute
Using environment temperature -25~+60℃
Using environment humidity 0~100%
Protection
Input short voltage、over voltage、opposing
connection,output over current、short circuit、
over heat etc.
Cooling method Air cooling
Noise <50dB
Protection class IP20(indoor)、IP65(outdoor)
Width ×depth ×height(mm) 800*600*2260 Single screen
Weight(kg) 600 800
13
14
250KW-500KW Wind turbine on grid inverter technical parameters
Type AONI-250KW AONI-500KW
Nominal capacity 250KW 500KW
Rated AC output power 250KW 500KW
Max. AC output power 275KW 550KW
Max. dc open circuit voltage 900Vdc
MPPT range 450Vdc~820Vdc
Max. array input current 625A 1200A
THD of AC current <3% (nominal power)
Power factor >0.99
Max. Efficiency 98%
Euro efficiency 97%
Nominal AC voltage 210Vac~310Vac (three phase)
Nominal AC frequency 47.5Hz~51.5Hz
Internal power consumption at night <100W
Automatically put into operation When the DC input and power grids meet to the
requirements, the inverters automated operation
Automatic restart time after cut off 5min(time adjustment)
Protection Input short voltage, over voltage, connecting contrary,
output over current, short circuit, over heat etc.
Communication interface RS485/RS232/GPRS/ Ethernet (optional)
Work environment temperature -25℃~+55°C
Relative humidity 0~95%,No condensation
Applicable altitude ≤2000 m,Higher than 2000m rated power should be
reduced
Cooling method Controlled forced-air cool
Noise (1m) ≤60dB
Degree of protection IP20(indoor)
Size(W*L*H mm) 1000*800*2060 2000*800*2060
Weight(kg) 850 1800
15