4
1 Windows 7 WASAPI USB Windows Vista and Windows 7 b Interface (WASAPI) as an output but has much lower distortion th always preferable to DirectSoun A media player must be used wh WASAPI plugin for that media pl The example below shows how t product using WASAPI as an out 1. Connect your Cambridge When the USB product i screen letting you know 2. Enter the Control Panel a audio device Windows 7 WASAPI US audio set-up guide both support Windows Audio Session Application t method. Using WASAPI gives a maximum outpu han DirectSound. For Windows Vista or Window nd. hich supports WASAPI output (such as foobar200 layer will also need to be installed. to configure your Windows 7 PC for use with a Ca tput method. foobar2000 is the media player use e Audio USB product to your PC using a USB Type is switched on, a dialogue box will appear at the b that a Cambridge Audio USB 1.0 device has been and select Sound to set the Cambridge Audio pro Set-up guide SB audio set-up guide n Programming ut of 24-bit/96kHz ws 7, WASAPI is 00) and usually a ambridge Audio USB ed in this example. e A to Type B cable. bottom of your n connected. oduct as the default

Windows 7 WASAPI setup - Cambridge Audionewarchive.cambridgeaudio.com/media/windows_7_wasapi_setup... · For Windows Vista or Windows 7, WASAPI is put (such as foobar2000) and foobar2000

Embed Size (px)

Citation preview

1

Windows 7 WASAPI USB audio set

Windows Vista and Windows 7 both

Interface (WASAPI) as an output method.

but has much lower distortion than

always preferable to DirectSound.

A media player must be used which supports WASAPI out

WASAPI plugin for that media player will also need to be installed.

The example below shows how to configure your Windows 7 PC for use with a Cambridg

product using WASAPI as an output method.

1. Connect your Cambridge Audio USB product to your PC using a USB

When the USB product is switched on, a dialogue box will appear at the bottom of your

screen letting you know that a Cambridge Audio USB 1.0 device has been connected.

2. Enter the Control Panel and select Sound to set the Cambridge

audio device

Windows 7 WASAPI USB

USB audio set-up guide

Windows Vista and Windows 7 both support Windows Audio Session Application Programming

(WASAPI) as an output method. Using WASAPI gives a maximum output of 24

but has much lower distortion than DirectSound. For Windows Vista or Windows 7, WASAPI is

always preferable to DirectSound.

ed which supports WASAPI output (such as foobar2000) and

WASAPI plugin for that media player will also need to be installed.

how to configure your Windows 7 PC for use with a Cambridg

product using WASAPI as an output method. foobar2000 is the media player used in this example.

Connect your Cambridge Audio USB product to your PC using a USB Type A to Type B cable.

When the USB product is switched on, a dialogue box will appear at the bottom of your

screen letting you know that a Cambridge Audio USB 1.0 device has been connected.

Enter the Control Panel and select Sound to set the Cambridge Audio product as the default

Set-up guide

USB audio set-up guide

cation Programming

Using WASAPI gives a maximum output of 24-bit/96kHz

For Windows Vista or Windows 7, WASAPI is

oobar2000) and usually a

how to configure your Windows 7 PC for use with a Cambridge Audio USB

oobar2000 is the media player used in this example.

Type A to Type B cable.

When the USB product is switched on, a dialogue box will appear at the bottom of your

screen letting you know that a Cambridge Audio USB 1.0 device has been connected.

Audio product as the default

2

Select the Cambridge Audio USB Audio 1.0 device and click Set Default

Press OK to exit

Now, all audio output by the PC will be output via USB to the Cambridge Audio

3. Install foobar2000. You

do this, from the foobar20

components.

Windows 7 WASAPI USB

Select the Cambridge Audio USB Audio 1.0 device and click Set Default

Now, all audio output by the PC will be output via USB to the Cambridge Audio USB product.

then need to manually install the WASAPI output support plugin. To

oobar2000 UI go to File > Preferences > Components >

Set-up guide

USB audio set-up guide

USB product.

then need to manually install the WASAPI output support plugin. To

Components > Get more

3

This takes you to an online download page where you can select and download the WASAPI

output support plugin which is a zip file that can be saved to your PC.

To install the WASAPI component

Step 1: Once again, open the foobar2000 preferences dialog.

Step 2: Go to the Components page.

Step 3: Click the "Install..." button a

Step 4: Press "Open", you will be prompted to

load the newly installed component.

installed WASAPI output support plugin listed in the components page.

Windows 7 WASAPI USB

This takes you to an online download page where you can select and download the WASAPI

output support plugin which is a zip file that can be saved to your PC.

WASAPI component;

pen the foobar2000 preferences dialog.

2: Go to the Components page.

Step 3: Click the "Install..." button and select the plugin from the component archive

", you will be prompted to ‘Apply’ and restart foobar2000 in order to

load the newly installed component. When foobar2000 restarts, you will see the newly

installed WASAPI output support plugin listed in the components page.

Set-up guide

USB audio set-up guide

This takes you to an online download page where you can select and download the WASAPI

component archive.

restart foobar2000 in order to

foobar2000 restarts, you will see the newly

4

4. Now you must select WASAPI as the preferred output method.

once again and under Playback, select Output. Then select

Audio 1.0)’ as the output device.

5. In the same Output page, set the output format to 24

Apart from the improved sound

slider in the task tray has no effect on volume levels during playback.

will now be adjusted dynamically accor

receiving Cambridge Audio USB p

Windows 7 WASAPI USB

Now you must select WASAPI as the preferred output method. Go to the

once again and under Playback, select Output. Then select ‘WASAPI (Cambridge Audio USB

as the output device.

In the same Output page, set the output format to 24-bit, and press OK.

Apart from the improved sound quality, you will know that this has worked because the volume

slider in the task tray has no effect on volume levels during playback. The sample rate and bit depth

be adjusted dynamically according to the audio being played using foobar2000

receiving Cambridge Audio USB product will display the signal information accordingly

Set-up guide

USB audio set-up guide

the Preferences page

WASAPI (Cambridge Audio USB

quality, you will know that this has worked because the volume

he sample rate and bit depth

oobar2000. The

accordingly.