6
 TOR Version www.beanair.com  ProcessSensor  Streaming 10 KHz IEEE 802.15.4 8-Channel isolated digital input Wireless data acquision system— IEEE 802.15.4 8-Channel isolated digital input New Product  Radio antenna diversity  End of Stroke sensor  Object detecon sensor (IR Proximity sensor,.)   Level sensor  Applicaons Main Features  Wireless data acquision system with 8-Channel isolated digital input Excellent radio link thanks to the antenna diversity developed by Beanair®  Radio Range : 300 m to 1000 m (L.O.S)  Ultra-Power Radio Technology IEEE 802.15.4  Current consumpon in sleeping mode : < 45 uA  Number of Input Channels : 8 channels  Streaming mode: 10 KHz sampling frequency on each channel  M12 Sensor connector with IP67 degree of protecon  Embedded logger : up to 1 000 000 measurements records (with events dang)  Enrely autonomous system : funcon either on Lithium-thionyl chloride primary baery or on Lithium-Ion rechargeable baery  Waterght Aluminium enclosure IP66 (dimensions Lxlxh : 111,5x64x21 mm) - suitable for Harsh Industrial Environment Ultra-low Power Data Logger 1 000 000 data acquision 

Wireless Sensor for Binary Measurement

  • Upload
    beanair

  • View
    221

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Wireless Sensor for Binary Measurement

8/6/2019 Wireless Sensor for Binary Measurement

http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 1/6

 

TOR Version 

www.beanair.com 

ProcessSensor  

Streaming10 KHz 

IEEE 802.15.48-

Channel isolateddigital input 

Wireless data acquision system— IEEE 802.15.4

8-Channel isolated digital input New Product  Radio antenna

diversity 

End of Stroke sensor 

Object detecon sensor (IR Proximity sensor,.)  

Level sensor 

 Applicaons 

Main Features 

Wireless data acquision system with

8-Channel isolated digital input

Excellent radio link thanks to the antenna

diversity developed by Beanair® 

Radio Range : 300 m to 1000 m (L.O.S) 

Ultra-Power Radio Technology IEEE

802.15.4 

Current consumpon in sleeping mode : < 45 uA 

Number of Input Channels : 8 channels 

Streaming mode: 10 KHz sampling frequency on each

channel 

M12 Sensor connector with IP67 degree of protecon 

Embedded logger : up to 1 000 000 measurements records

(with events dang) 

Enrely autonomous system : funcon either on

Lithium-thionyl chloride primary baery or on

Lithium-Ion rechargeable baery 

Waterght Aluminium enclosure IP66 (dimensions Lxlxh  :

111,5x64x21 mm) - suitable for Harsh Industrial Environment 

Ultra-low 

Power 

Data Logger

1 000 000 dataacquision 

Page 2: Wireless Sensor for Binary Measurement

8/6/2019 Wireless Sensor for Binary Measurement

http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 2/6

 

TOR Version 

www.beanair.com 

ProcessSensor  

Embedded Data Logger up to

1,000,0000 data acquision records 

The BeanDevice® TOR integrates an embedded Data Logger, which can be used to log data when a Wireless

Sensor Networks can not be easily deployed on your site. All the data acquision are stored on the

embedded ash and then transmied to the BeanGateway® when a Wireless Sensor Networks is

established. The DataLogger feature is compable with all the data acquision mode available on your

BeanDevice® TOR: 

LowDutyCycle Data Acquision 

 Alarm

Survey  

Example: Bole Manufacturing 

The BeanDevice® TOR is congured

with its dataLogger feature. A stan-

dalone installaon of the BeanDevice®

TOR will be done (mounted on the

walls), without the necessity for any

connecon to the BeanGateway®. 

Proximity sensor interfaced with Bean-

Device® TOR counts every bole and

is recorded on the embedded ash. 

When needed a technician working on

the site can send a request for a log

transmission. Then the BeanDevice®

TOR starts sending all its logs . If all the

logs are sucessfully transmied to the

BeanGateway®, the ash memory is

erased and new logs will be recorded . 

Page 3: Wireless Sensor for Binary Measurement

8/6/2019 Wireless Sensor for Binary Measurement

http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 3/6

 

TOR Version 

www.beanair.com 

ProcessSensor  

Remote conguraon and monitoring 

*Over -the- Air Conguraon 

OTAC* 

The BeanScape® applicaon allows the

user to view all the data transmied by

the BeanDevice® TOR

With the OTAC (Over-the-Air

conguraon) feature, the user can

remotely congure the

BeanDevice® TOR 

Several data acquision modes are available on the

BeanDevice® TOR: 

Low Duty Cycle Data Acquision mode (LDCDA): the data

acquision is immediately transmied by radio. The

transmission frequency can be congured from 1s to 24h. 

Alarm Mode : the measured value is transmied by radio

whenever an alarm threshold (xed by the user) is

detected (4 alarm threshold levels High/Low).  

Survey Mode : operates like the Alarm mode but the de-

vice sends frequently a beacon frame informing its

current status. 

Math Mode : Values such as the mean value, minimum

value, maximum value and standard deviaon are

calculated on sample me series and transmied by

radio . 

TOR 

 xxxxxx  

Page 4: Wireless Sensor for Binary Measurement

8/6/2019 Wireless Sensor for Binary Measurement

http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 4/6

 

TOR Version 

www.beanair.com 

ProcessSensor  

RF Specicaons 

Wireless Protocol Stack  IEEE 802.15.4 (2006 version) 

WSN Topology  Point-to-Point / Star 

Encrypon  AES 128 bits (AES integrated coprocessor) 

Data rate 250 Kbits/s 

RF Characteriscs  ISM 2.4GHz – 16 Channels. Antenna diversity architecture designed by Beanair® 

TX Power  +0 dBm to +18 dBm

Receiver Sensivity -95,5 dBm to -104 dBm 

Max. Radio Range  1km (L.O.S) 

Antenna  Antenna diversity : 2 omnidireconal antenna with a gain of 2,2 dBi  

Over-the-air conguraon (OTAC) parameters 

Data Acquision mode 

Low Duty Cycle Data Acquision (LDCDA) Mode: 1s to 24 hour 

 Alarm mode: the measured value is transmied by radio whenever an alarm threshold (xed

by the user) is detected (4 alarm threshold levels High/Low). 

Streaming Packet Mode: all measured values are transmied (90 samples in a frame) within a

connuous ow

Sample Rate(SPS = sample per second) 

Minimum: 1 SPS 

Maximum: 10 kSPS maximum (on each channel ) 

Alarm Threshold  2 high levels alarms & 2 low levels alarms 

Power Mode  System on « Idle » or « Acve »

TX Power -7 dBm / -1 dBm / 5 dBm / 11 dBm / 15 dBm / 18 dBm 

Product Reference 

BND-TOR-IEEE

Specicaons  Data acquision system specicaon 

Signal Condionning  8 isolated digital inputs

AON Input Channels  5-24 Volts 

Streaming measurement

mode 

10 KHz Maximum on each channel 

Sensor Connector  M12-5Pins, degree of protecon IP67 

Page 5: Wireless Sensor for Binary Measurement

8/6/2019 Wireless Sensor for Binary Measurement

http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 5/6

 

TOR Version 

www.beanair.com 

ProcessSensor  

Others specicaons 

Embedded logger 

Storage Capacity : up to 1 000 000 measurements 

Integrated real me clock 

Write/read Cycle: 400 000 

Real Time Clock 

Extremely Accurate Real Time Clock: 

Accuracy ±2ppm from 0°C to +40°C

Accuracy ±3.5ppm from -40°C to +85°C 

Integrated baery charger 

Integrated Lithium-ion baery charger with high precision baery monitoring : 

Overvoltage Protecon, Overcurrent/Short-Circuit Protecon, Undervoltage Protecon 

Baery Temperature monioring 

Current accumulaon measurement 

Current consumpon 

During data acquision : 20 to 30 mA 

During Radio transmission : 40 mA @ 0dBm , 70 mA @ 18 dBm 

During Idle : < 45 uA 

Operang Temperature  Industrial temperature : -40 °C to +85 °C

Enclosure 

Aluminium & Waterght (IP66) enclosure

Dimensions in mm (LxWxH): 80x55x21 mm, Weight (baery included) : 135g 

Shocks resistance  60g during 50 ms 

Norms  CE Labelling Direcve R&TTE (Radio) ETSI EN 300 328 

ROHS - Direcve 2002/95/EC 

External power supply  External power supply : +8v to +28v 

Rechargeable baery  High density Lithium-Ion rechargeable baery capacity of 1.3 Ah (referenced as BAT1.3DMG) 

Power-supply bloc (Opon)  Wall plug-in, Switchmode power Supply 12V @ 1,25A with sealed M8 Plug (IP67) 

Mechanical mounng

(Opon) Screw mounng 

Product specicaons are subject to change without noce. Contact Beanair for latest specicaons.  

Page 6: Wireless Sensor for Binary Measurement

8/6/2019 Wireless Sensor for Binary Measurement

http://slidepdf.com/reader/full/wireless-sensor-for-binary-measurement 6/6

 

TOR Version 

www.beanair.com 

ProcessSensor  

Descripon  StarterKit Reference 

Starterkit Wireless Light & Temperature Sensors 

1 x BeanGateway Ethernet (Indoor version), Ref.: BGTW -ETH -IND 1 x BeanDevice TOR, Ref: BND-TOR-IEEE 

1 x Beanscape Lite , Ref: BNSC_LITE  

SK_BND_TOR_IND 

Starterkit Wireless Light & Temperature Sensors 

1 x  BeanGateway Ethernet (Outdoor version), Ref.: BGTW -ETH -OUT  1 x  BeanDevice TOR, Ref: BND-TOR-IEEE 

1 x Beanscape Lite, Ref: BNSC_LITE  

SK_BND_TOR_OUT 

Starterkit Wireless Light & Temperature Sensors with hybrid IEEE 802.15.4 & GSM/GPRS Network 

1 x BeanGateway Ethernet/GSM/GPRS (Indoor version), Ref: BGTW -GPRS-IND 1 x  BeanDevice TOR, Ref: BND-TOR-IEEE 

1 x OneSense - WebServer supervision sofware SK_BND_TOR_ONESENSE_IND 

Starterkit Wireless Light & Temperature Sensors with hybrid IEEE 802.15.4 & GSM/GPRS Network 

1 x BeanGateway Ethernet/GSM/GPRS (Oudoor version), Ref: BGTW -GPRS-OUT  1 x  BeanDevice TOR, Ref: BND-TOR-IEEE 

1 x OneSense - WebServer supervision sofware SK_BND_TOR_ONESENSE_OUT 

Indoor Version 

TOR 

OR 

Geng started with a Wireless Sensor Networks 

Outdoor Version 

WSN Supervision Soware 

OR 

OneSense® Lite Webserver  

by  

The BeanDevice® TOR operates only on our Wireless Sensor Networks , you will need the BeanGateway® and the BeanScape®

for starng a wireless sensor Networks .