®

Automatic Doubles Traps

Automatic Doubles Wobble Traps

Skeet Machines

Wobble Skeet Machines

Fully Automatic Pat-Trap® Wobble Singles/Doubles

CHOICE OF THE ATA. PAT-TRAP IS THE OFFICAL

SUPPLIER OF TRAP MACHINES AT THE GRAND AMERICAN

®

In the 1980’s, Stuart W. Patenaude thought that

there had to be a better way to throw doubles

targets. Stuart went to work in his modest

workshop. Using parts from an old AMC Pacer and

over a year of development, he created the first Pat-

Trap® Automatic Doubles Machine. Since that first

machine we have strived to continuously improve

and engineer the finest traps. Thousands of traps

later, Pat-Trap® has emerged as the new standard

for the sport of Trapshooting, and is the official

supplier to the ATA Home grounds.

Our standard Automatic Pat-Trap® throws both

single and double targets. Our Pat-Trap® Wobble

version throws singles, doubles, wobble singles,

and wobble doubles.

More registered targets are thrown from Pat-Trap®

than from any other automatic trap machine!

We pride ourselves in the quality of our

workmanship and our attention to prompt personal

customer service and technical assistance.

Stuart Patenaude loading some early model Pat-Traps

The Best Automatic Doubles Trap Machines Period!

With today's ever increasing array of state and insurance

regulations, the Pat-Trap® will pay for itself in no

time. No personnel in the trap house means safety and

savings. Double scores can increase due to the ease and

convenience of changing from singles to doubles in

seconds allowing more practice time. The Pat-Trap®

can make shooting more enjoyable and economical.

The Pat-Trap® fits ATA regulation trap houses. Pat-

Trap®’s no-nonsense design is simple to operate,

maintain, and easy to load. The standard turret

(magazine) holds four full cases of targets (540+) and an

optional side loading turret is available.

The vibration free Pat-Trap® features commercial

grade, heavy duty steel construction, sealed ball and

roller bearings, and olite bushings. It is fully adjustable

for wind-age and elevation.

The Pat-Trap® uses 110 volts AC. The Pat-Trap® is

compatible with most voice release systems thus

eliminating the need for pullers. Standard Pat- Trap with Four Case Turret

PAT-TRAP, INC. CHOICE OF THE ATA ● 632 Western Avenue ● Henniker, New Hampshire 03242 ● Phone (603) 428-3396 ● www.pattrap.com ●

The Most Reliable Trap and Skeet Machines!

More registered targets are thrown from

Pat-Trap® than from any other automatic

trap machine!

Four Case Turret (540 Targets).

Switch from “Singles” to “Doubles” in

Seconds and vice versa.

Operates from standard 110 VAC, 15

Amp, 60 Hz. Power Source.

Electronically operated solenoid release

for “Instant response”.

Direct Drive Hydraulic Pump that uses

5W20 oil.

Vibration Free.

Sealed Ball Bearings.

Side-Loading Turret Available.

Base Dimensions 30” Wide by 21.5” Deep.

Height Requirements 41” (Minimum) -

43” (Preferred) from pedestal to ceiling

inside trap house.

Use with manual Pull Cord or Accepts

Voice Releases.

No Gear Boxes to break down or complex

electronics that overheat.

Made in The USA.

US Patents Numbers 5249563 and 6176229

One Year Parts and Labor Warranty

New “XXX” Finger for Improved “Doubles”

Maintenance Free Elevated Rollers

All Hydraulic Operation - Wobble Trap

Rugged Throw Arm for Consistent Targets

PAT-TRAP, INC. CHOICE OF THE ATA ● 632 Western Avenue ● Henniker, New Hampshire 03242 ● Phone (603) 428-3396 ● www.pattrap.com ●

Pat-Trap® now offers a line of Skeet

Machines built upon the proven platform of the

original Pat-Trap®. Our Skeet machine pairs

throw the most consistent Targets. Shooting

complexes love the ability to stock parts that are

common to both their trap and skeet machines.

Each Skeet machine holds five cases (675

targets), and has built in elevation and windage

adjustments. Wobble Skeet version also

available .

Each Skeet Pair features the Pat-Trap®’s famous

heavy duty construction and reliability for the

most consistent target presentation.

Standard Skeet Machine with Five Case Turret

Pat-Trap Skeet Machines ®

Easy access magnetic Reed

Switches that facilitate simple

adjustments for setting the

proper field angles

Fine Tooth Elevation Cogs

for establishing proper

target height

Main Spring Clutch Systems for

longer spring life while

eliminating vibrations

All Standard Pat-Trap® Machines now feature:

PAT-TRAP, INC. CHOICE OF THE ATA ● 632 Western Avenue ● Henniker, New Hampshire 03242 ● Phone (603) 428-3396 ● www.pattrap.com ●

Easily accessible windage

and height controls for

quick set-up angles.

Maintenance free

elevated rollers for

cleaner operation.

Direct-drive Hydraulic Pump with

Synthetic Oil for consistent

operation in all temperature

extremes.