Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Preparing today for tomorrow
Product info
Application area
Maintenance Oil may be used on all oiled wood fl oors.
Maintenance Oil Natural is suitable for dark wood types,
whereas Maintenance Oil White is used for lighter, pos-
sibly lye treated fl oors such as pine, ash or oak, in order to
preserve and enhance the light surface.
Result
Maintenance Oil provides the fl oor with additional hard-
wear properties in the upper pore layer. At the same time
the wood receives the ideal fi nish highlighting the natural
wood grain and the colours.
Application
Maintenance Oil may be applied both manually, with a paint-
roller or with a polishing machine.
After care
Not required.
Maintenance and cleaning
Maintenance cleaning with Natural Soap. Basic Cleaning
with Wood Cleaner.
Maintenance with Maintenance Oil/-Paste.
wood fl oors
manually or by machine
Container: 1, 2,5 and 5 litre
Consumption: 30-40 m2/litre
depending on the wood type.
Available in natural and white
(5 litre only in natural)
WOCA Maintenance Oil– Initial- and regular maintenance care for naturally hardened oiled surfaces
Preparing today for tomorrow
3
2
4
1
Maintenance Oil natural and white may by used for all
oiled surfaces and is especially suitable for the regular
maintenance of wood surfaces.
Before a new fl oor is taken into use it is recommended to
buff it – both industrially oiled fl oors and residentially oiled
fl oors. The fi nal buffi ng provides a hard-wearing surface
and may take place either by hand or with machine. Oiled
fl oors should be maintained regularly – normally once a
year, but more often in the case of fl oors exposed to extre-
mely hard wear.
1 Clean the fl oor with 125 ml Wood Cleaner mixed into
5 litre water. Leave the fl oor to dry for at least 8 hours.
The fl oor must be completely dry.
2 Shake the container carefully. Apply approx. 100 ml
oil per 4 m2 with pad, paint roller, cotton cloth or use
polishing machine for large surfaces.
3 It is important that the Maintenance Oil is carefully
polished into the wood. Continue polishing until the
wood appears saturated and the surface looks uniform.
4 Wipe the fl oor with clean, dry cotton cloths before pro-
ceeding with the next section of fl oor to be fi nished.
The fl oor should not appear wet and there should not
be any excess oil left on the surface after polishing.
Continue in sections untill the fl oor has been fi nished.
When polished with polishing machine the fl oor will be
pre-hardened after approx. 4 hours at 20° C and may
cautiously be taken into use. Manually polished fl oors
may be taken into use after 24 hours. The surface is
fully hardened after 24 hours. Do not expose the fl oor
to water during the hardening time.
Tools
A polishing machine with beige/
white polishing pad.
Paintroller and cotton cloths.
Clean tools with Solvent.
Please notice!!
Risk of self-ignition! Due to the risk
of self-ignition it is important that
sanding dust and oil wetted cloths
are soaked in water and disposed
of in a tightly closed container
after use.
How to do…– WOCA Maintenance Oil: Initial- and regular maintenance care for naturally hardened oiled surfaces
Preparing today for tomorrow
Product info
Application area
Wood Cleaner is used for the basic cleaning of oiled
surfaces indoors. Wood Cleaner is also suitable for the
cleaning prior to the basic fi nishing with oil or soap, or prior
to a lye treatment.
Result
Wood Cleaner has a high grease removing effect and dis-
solves e.g. old soapfi lm, grease and dirt, whereas oil is not
affected.
Application
Mix Wood Cleaner in a ratio 1:40 with water. Apply with
mop, cloth or machine.
After care
Soaped fl oors with Natural Soap. Oiled fl oors with Mainte-
nance Oil or Maintenance Paste.
wood surfaces indoors
removal
Container: 1 and 2,5 litre
Consumption: 200-300 m2/litre
depending on the surface
WOCA Wood Cleaner– for the basic cleaning of wood surfaces, irrespective of the basic fi nish
Preparing today for tomorrow
Wood Cleaner may be used for the cleaning of lye
treated, soaped, oiled, waxed and lacquered surfaces.
Furthermore, it is well suited for cleaning of unfi nis-
hed wall- and ceiling panels, furniture etc. Removes
grease, dirt and soap residues.
1 125 ml Wood Cleaner is mixed into 5 l lukewarm water.
Leave solution on surface to dissolve dirt if necessary.
2 Scrub with brush or pad manually or with fl oor machine
if very dirty. Wipe clean with mop or cloth. Always wipe
a second time to minimise the exposure to water of
surface.
3 Repeat if fl oor is extremely dirty.
Tip: Always work with two buckets – one with Wood Clea-
ner mix with water and one with rinse clear water.
Tools
2 plastic buckets, mop,
doodlebug, fl oor cloth or
- the like.
Clean tools with water and soap.
How to do…– WOCA Wood Cleaner: basic cleaning of wood surfaces,
irrespective of the basic fi nish
Preparing today for tomorrow
Product info
Application area
Natural Soap is suitable for the regular cleaning and for the
protection of all wood fl oors. Natural Soap Natural is used
for darker wood types, whereas Natural Soap White is used
for lighter fl oors, in order to add extra white pigements to
preserve the light nuance. Natural Soap is also suitable for
the basic treatment of lye treated fl oors.
Result
Cleaning with Natural Soap removes dirt and provides the
wood with a protective layer at the same time. Thus Natu-
ral Soap has both cleaning and maintaining properties and
is therefore ideal for the basic treatment of pine fl oors if a
treatment with soap is preferred to one with oil.
Application
Apply a mop or a cotton cloth.
After care
Not required.
Maintenance and cleaning
With each cleaning process dirt and old soap layers are
removed and replaced by a new protective soap layer.
nance of all wood fl oors
softwood fl oors
Container: 1, 2,5 and 5 litre
Consumption: 320-400 m2/litre
Available in white and natural
WOCA Natural Soap– Cleaning of oiled, waxed or soaped surfaces
Preparing today for tomorrow
Natural Soap is a purpose-made quality soap, which due
to its nourishing properties quickly closes the pores of
the wood and protects against dirt and penetration of
liquids.
Ideal cleaning and maintenance of all oiled, waxed or
soaped wood surfaces. Especially suitable for fl oors,
furniture, panels and worktops. Due to the nourishing
properties of the Natural Soap the surface is given opti-
mum protection. Natural Soap white is recommended for
light wood species, while Natural Soap natural is ideal for
dark wood. May be used for the cleaning and maintenance
of all known oil systems.
1 Natural Soap white is shaken carefully before use.
2 125 ml Natural Soap is mixed into 5 l of lukewarm
water. It is recommended always to work with 2
buckets: one with soap water and one with rinse water.
Clean the fl oor with minimum quantity of water – leave
soap water on fl oor briefl y in order to dissolve dirt.
Remove dirty soap water with hard wrung out mop or
cloth and rinse out in bucket with rinse water.
3 Always wipe fl oor with soap water with hard wrung
out mop or cloth in order to re-establish the protective
Natural Soap fi lm.
Tip: Very dirty fl oors may be cleaned with Wood Cleaner
and subsequently with Natural Soap. Areas with heavy
wear may be maintained with Maintenance Paste after
cleaning with Wood Cleaner. Particularly diffi cult stains may
be removed with Spot Remover.
Detailed information about classic Scandinavian treatment
of softwood fl oors with lye and Natural Soap or only with
Natural Soap is available under:
www.woodcaredenmark.com
Tools
2 plastic buckets, mop, doodle-
bug, fl oor cloth or the like.
Clean tools with water and soap.
How to do…– WOCA Natural Soap: Cleaning of oiled, waxed or soaped surfaces