Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Customer Support | certainteed.com/ceilings | 800-233-8990
PANELS Wood Ceilings & Walls
This line of wood panels, available in 14 standard veneers with narrow reveal and semi-concealed edge details and a variety of perforation patterns, elevates the design of a traditional lay-in ceiling system.
* Actual veneer shades or grains may vary. Request a sample for more accurate finish portrayal. Additional special order veneers and finishes available. Please contact your local sales representative for more information.
FEATURES AND BENEFITS• Variety of perforated, slotted, and channeled
options to enable sound absorption
• Achieve up to NRC 0.80 with channeled options and acoustical infill
• Sound blocking with CAC options between 28-38
• Semi-concealed edge available to minimize the appearance of the suspension system
• Available in 14 standard veneers to enable design flexibility
VENEERS:
APPLICATIONS• Conference Rooms
• Private Offices
• Lobbies & Atria
• Hospitality
Natural Cherry (VPC0)
Plain Slice Veneers Reconstituted VeneersBamboo Veneers
Medium Brown Cherry (VPCB)
Red Oak (VOC0)
Steamed European Beech (VEB0)
Walnut Coffee (VWPC)
Medium Red Cherry (VPCR)
Walnut (VWP0)
Maple (VMC0)
Maple (RMC0)
Walnut (RWN0)
Quartered Blonde (RQB0)
Cherry (RRC0)
Narrow Cane Bamboo Caramel(BNC0)
Narrow Cane Bamboo Natural (BNN0)
Unperforated Slotted ChanneledPerforated
PERFORATION OPTIONS
R8X31L
t e l : 8 8 8 . 3 5 7 . 2 3 4 5 f a x : 8 0 0 . 4 6 2 . 6 6 5 0 w w w . n o r t o n c e i l i n g s . c o m
ORTONINDUSTRIES
INC.
N
R8X31S
2' x 2' panels, flush lay-in mounting, natural select white maple, clear topcoat
l o o k i n g f o r w a r d t o l o o k i n g u p™
STANDARD PANEL SIZES
2' x 2', 2' x 3', 2' x 4', 1' x 4', 3' x 3', 4' x 4', 1' x 5', 2' x 5'Custom panel sizes available.
Wood Panel C E I L I N G S& W A L L S
R10X40L
R6X16S R6X31S R10X40S
SLT3X2
R6X16L R6X31L
SLT3X3
• variety of panel sizes• uses real wood veneers• 4 mounting styles work with standard t-bar suspensions• 10 standard perforation patterns or customize your own• perimeter caps and cutouts for fixtures• class A fire-rated coating available • certified wood available
R8X16L
1/4" round hole 5/8" on centerlinear12.6% open area
1/4" round hole 1¼" on centerlinear3.1% open area
3/8" round hole 1linear4.5% open area
/ " on center 9 16
1/4" round hole 5/8" on centerstaggered12.2% open area
1/4" round hole 1¼" on centerstaggered3.1% open area
3/8" round hole 1linear4.4% open area
/ " on center 9 16
5/16" round hole 1¼" on centerlinear4.9% open area
5/16" round hole 5/8" on centerlinear19.6% open area
PERFORATION OPTIONS
R8X16S
5/16" round hole 5/8" on centerstaggered19.6% open area
5/16" round hole 1¼" on centerstaggered4.9% open area
Perforations are available on ALL panels. Standard panels are non-perforated. Perforated panels can be an aesthetic design, or one of performance. Perforated panels can have acoustical fleece factory installed and/or acoustical pad on top for increased performance.
3/8" x 3" slot2" on center10.8% open area
3/8" x slot 3" on center7.2% open area
We can create any perforation pattern you choose! Corporate logos, letters, numbers, geometric designs, random lines and patterns. For details, contact us at 888.357.2345.
custom perforation patterns
R8X31L
t e l : 8 8 8 . 3 5 7 . 2 3 4 5 f a x : 8 0 0 . 4 6 2 . 6 6 5 0 w w w . n o r t o n c e i l i n g s . c o m
ORTONINDUSTRIES
INC.
N
R8X31S
2' x 2' panels, flush lay-in mounting, natural select white maple, clear topcoat
l o o k i n g f o r w a r d t o l o o k i n g u p™
STANDARD PANEL SIZES
2' x 2', 2' x 3', 2' x 4', 1' x 4', 3' x 3', 4' x 4', 1' x 5', 2' x 5'Custom panel sizes available.
Wood Panel C E I L I N G S& W A L L S
R10X40L
R6X16S R6X31S R10X40S
SLT3X2
R6X16L R6X31L
SLT3X3
• variety of panel sizes• uses real wood veneers• 4 mounting styles work with standard t-bar suspensions• 10 standard perforation patterns or customize your own• perimeter caps and cutouts for fixtures• class A fire-rated coating available • certified wood available
R8X16L
1/4" round hole 5/8" on centerlinear12.6% open area
1/4" round hole 1¼" on centerlinear3.1% open area
3/8" round hole 1linear4.5% open area
/ " on center 9 16
1/4" round hole 5/8" on centerstaggered12.2% open area
1/4" round hole 1¼" on centerstaggered3.1% open area
3/8" round hole 1linear4.4% open area
/ " on center 9 16
5/16" round hole 1¼" on centerlinear4.9% open area
5/16" round hole 5/8" on centerlinear19.6% open area
PERFORATION OPTIONS
R8X16S
5/16" round hole 5/8" on centerstaggered19.6% open area
5/16" round hole 1¼" on centerstaggered4.9% open area
Perforations are available on ALL panels. Standard panels are non-perforated. Perforated panels can be an aesthetic design, or one of performance. Perforated panels can have acoustical fleece factory installed and/or acoustical pad on top for increased performance.
3/8" x 3" slot2" on center10.8% open area
3/8" x slot 3" on center7.2% open area
We can create any perforation pattern you choose! Corporate logos, letters, numbers, geometric designs, random lines and patterns. For details, contact us at 888.357.2345.
custom perforation patterns
P3 (6mm Round Hold; 32mm OC Staggered)
P4 (6mm Round Hole; 16mm Linear OC)
S5 (3/8" x 3" Oval Slot)
S6 (3/8" x 3" Oval Slot)
C7 (3mm Channel with 13mm Spacing)
C8 (3mm Channel with 5mm Spacing)
SUSPENSION SYSTEM OPTIONS
Narrow Reveal9/16
Narrow Reveal 9/16” Grid
Semi-Concealed 15/16” Grid
U1(Unperforated)
PATTERN CONSIDERATIONS
Backers and Dowels are 1/16" short of the module width. This allows for thebacker to expand and contract. Each module is centered by the installer.
Typically there is a 1/2" or 1" gap separating panel lengths, which allows fornatural expansion and contraction of wood. This design is fully accessible atany location for maintenance within the plenum area. Gaps can be spacedeither randomly or symmetrically. It is important to specify the length of thepanel and/or the desired gap when determining the layout of the ceiling.The standard module is 1' x 8', however, we often let the layout of the spacedetermine the best module size to reduce field trimming and waste. Pleaseconsult Norton Industries for limitations and options.
staggered joints symmetrical joints
W O O D G R I L L E
*MAPLE, SELECT WHITE, PLAIN SLICE(PWM)
*OAK, RED, PLAIN SLICE (PRO)
*OAK, RED, RIFTCUT (RRO)
MR Credit 2.1/2.2Construction Waste Management
MR Credit 4.1/4.2Recycled ContentMR Credit 5.1/5.2Regional Materials (location dependent)
MR Credit 7.0Certified WoodEQ Credit 3.1/3.2Construction IAQ Management PlanEQ Credit 4.1/4.2/4.4Low Emitting Materials
available leed© credits
MR Credit 3.1/3.2Materials Reuse
There are many other veneer options available.
For inquiries, please call us at 888.357.2345
Note: the veneer colors and grain shown here
are representative of the species only.
ASH (AS) BIRCH (BI) CHERRY (CH) DOUGLAS FIR,MIXED GRAIN (MDF)
HEMLOCK,MIXED GRAIN (MH)
VENEER SELECTION * Standard veneers
HEMLOCK,VERTICAL GRAIN (VH)
POPLAR (PL) RED OAK (RO) WALNUT (WN) WESTERN REDCEDAR (WRC)
WHITE MAPLE (WM) WHITE OAK (WO)
PARTICLE BOARD(PB)
PLAIN MDF (MDF)
UN-WRA PPED
TEXTURE SAWNHEMLOCK (TSH)
TEXTURE SAWNWESTERN REDCEDAR (TSW)
DOUGLAS FIR,VERTICAL GRAIN(VDF)
NATURAL FINISHINGS
SIMULATED FINISHES *On white hardwood
BEECH (SB) CHERRY, DARK (SDC) CHERRY, LIGHT (SLC) MAPLE (SM) WALNUT (SW)
SOLID WOOD SELECTION
ANIGRE, PLAINSLICE (PA)
*ASH, WHITE, QUARTERED (QA)
BAMBOO, CARAMEL,NARROW CANE(NCB)
BAMBOO, CARAMEL,WIDE CANE (WCB)
BAMBOO, NATURAL,NARROW CANE(NNB)
BAMBOO, NATURAL,WIDE CANE (NWB)
DOUGLAS FIR,VERTICAL GRAIN (VD)
EUCALYPTUS,QUARTERED (QE)
MAHOGANY,PLAIN SLICE (PM)
*MAPLE, WHITE,ROTARY CUT (RWM)
*WALNUTPLAIN SLICE (PW)
RECON MAPLE (RM) RECON WALNUT(RW)
OAK, WHITE, PLAINSLICE (PWO)
*BIRCH, SELECTWHITE, PLAINSLICE (PWB)
BEECH EUROPEANSTEAMED, PLAINSLICE (PEB)
*CHERRY, PLAINSLICE (PBC)
*BIRCH, SELECTWHITE, ROTARY CUT (RWB)
HICKORY, PLAINSLICE (PBH)
*CHERRY,QUARTERED (QC)
OAK, WHITE, RIFTCUT (RWO)
TEXTURE SAWNWALNUT (TSWN)
SOLID WOODInterior ApplicationsOther species are offeredZero VOC water-based 20% sheen clear topcoatCustom stains availableClass A fire-rated coating availableVariable profile
45LB DENSITY CORE - VENEER FINISHInterior ApplicationsExtensive veneer selectionZero VOC water-based 20% sheenclear topcoatCustom stains availableClass A fire-rated core or coating availableVariable profileHigh recycled contentNo added urea-formaldehydeMaximum stability, no warping
C9 (3mm Channel with 25mm Spacing)
LEED® v4
All products are made-to-order and project specific. LEED credit vary by project. Please contact your local CertainTeed sales representative for specific LEED credit opportunitiesrelated to your project.
Additional configurations, sizes, and finishes available: Contact your local Sales Representative or call 800-233-8990.
Customer Support | certainteed.com/ceilings | 800-233-8990
This line of wood panels, available in 14 standard veneers with narrow reveal and semi-concealed edge detailsand a variety of perforation patterns, elevates the design of a traditional lay-in ceiling system.
PANELS Wood Ceilings & Walls
5005 _ _ _ _ _ _ Panel 24 x 24 x 3/4 9/16 A 2.81
5010 _ _ __ _ _ Panel 48 x 24 x 3/4 9/16 A 2.81
5015 _ _ _ __ _ Panel 48 x 12 x 3/4 9/16 A 2.81
5020 _ _ _ _ _ _ Plank 72 x 12 x 3/4 9/16 A 2.81
5025 _ _ _ _ _ _ Plank 72 x 24 x 3/4 9/16 A 2.81
5030 _ _ _ __ _ Panel 30 x 30 x 3/4 9/16 A 2.81
5105 _ _ _ _ _ _ Panel 24 x 24 x 3/4 9/16 A 2.39
PANELS Format Dimensions (L x W x H) (in.) Grid Face Fire Class Weight
(Lbs. / Sq. Ft.)
NARROW REVEAL (9/16")
SEMI-CONCEALED (15/16")
5205 _ _ _ _ _ _ Panel 24 x 24 x 3/4 15/16 A 2.81
5210 _ _ _ __ _ Panel 48 x 24 x 3/4 15/16 A 2.81
5215 _ _ _ _ _ _ Panel 48 x 12 x 3/4 15/16 A 2.81
5305 _ _ _ _ _ _ Panel 24 x 24 x 3/4 15/16 A 2.39
UNDERSTANDING ITEM NUMBERS: To specify or order a specific product, include the 4-digit Item Number followed by the 2-character Configuration Code and the 4-character Color Code.
Configuration codes: Unperforated (U1), Slotted (S5, S6), Perforated (P3, P4), Channeled (C7, C8, C9)
Color Codes:Natural Veneers: Plain Slice Veneers: Cherry (VPC0), Medium Brown Cherry (VPCB), Medium Red Cherry (VPCR), Steamed European Beech (VEB0), Maple (VMP0), Red Oak (VPR0), Walnut Coffee (VPWC), Walnut (VPW0) Reconstituted Veneers: Reconstituted Cherry (RRC0), Reconstituted Walnut (RWN0), Reconstituted Maple (RMC0), Quartered Blonde (RQB0) Bamboo Veneers: Narrow Cane Bamboo Caramel (BNC0), Narrow Cane Bamboo Natural (BNN0)
Example: To order a 2 x 2' perforated (P3), narrow reveal panel in Narrow Cane Bamboo Natural, the item number would be
5005 P3 BNN0
Item number
Color Code
Configuration Code
ACOUSTICAL INFORMATION
No Infi ll Theatre Black f Symphony m HNRCPattern NRC NRC NRC CAC
P3 — 0.65 0.60 37
P4 — 0.65 0.60 37
S5 — 0.65 0.60 37
S6 — 0.65 0.60 37
C7 0.75 0.80 0.65 40
C8 0.80 0.80 0.70 40
C9 0.50 0.70 0.50 40
Pattern U1 38 CAC
CAN’T FIND A SIZE? Additional configurations, sizes, and finishes available. Contact your local Sales Representative or call 800-233-8990.
Customer Support | certainteed.com/ceilings | 800-233-8990
TRIM AND TRIM ACCESSORIES Product Name Color Use
1005T2_ _ _ _ 2" x 96" x 3/4" Trim Veneer Finishes2" veneered perimeter trim; each 96" trim piece includes 1 3" Alignment Splice Plate (C-101) and 4 Panel Edge Fixing Brackets (C-113) for trim installation
1015T4_ _ __ 4" x 96" x 3/4" Trim Veneer Finishes4" veneered perimeter trim; each 96" trim piece includes 1 3" Alignment Splice Plate (C-101) and 4 90 Degree Perimeter Trim Brackets (C-116) for trim installation
1025T6_ _ _ _ 6" x 96" x 3/4" Trim Veneer Finishes6" veneered perimeter trim; each 96" trim piece includes 1 3" Alignment Splice Plate (C-101) and 4 90 Degree Perimeter Trim Brackets (C-116) for trim installation
C-116 90 Degree Perimeter Trim Bracket Metal For attaching perimeter trim to modules; 1 clip per linear foot of trim
C-100 90 Degree Perimeter Trim Clip MetalFor securing 90 degree perimeter trim corners; 1 clip required for each corner
C-101 3" Alignment Splice Plate Metal For splicing lengths of trim; 1 clip required for each connection
PHYSICAL DATAMATERIAL Fire-retardant Particle Board or fire-retardant MDF
SURFACE FINISH Clear or tinted top with 20% sheen
FIRE CLASS (ASTM E1264)Class A (Composite) per ASTM E84Flame Spread: 25 or lessSmoke Developed: 50 or less
SITE CONDITIONS Wood Wood panels must be acclimatized for 72 hours prior to installation. Maintain relative humidity between 86% and temperature between 50°F and 89°F for the life of the product.
Wood is a natural material with varying grain and color characteristics. Characteristics may vary from panel to panel.
SEISMIC RESTRAINTSee installation instructions for seismic area installation information.
WARRANTYFull warranty information can be found at CertainTeed.com/ceilings.
LEED® is a registered trademark of the U.S. Green Building Council. CTC-08-607 © 9/19 CertainTeed
PANELS Wood Ceilings & Walls
ACCESSORIES
INSTALLATION ACCESSORIES Product Name Color Use
C-108 Semi-Concealed Safety Clip MetalMinimum 4 safety clips per semi-concealed panel, 2 clips per 2' side included with semi-concealed panel order; additional clips sold by the piece
C-113 Panel Edge Fixing Bracket MetalPanel edge perimeter support for fi eld modifi ed narrow reveal and semi-concealed panels; 2 fi xing brackets per 2' fi eld cut panel edge; order separately by the piece per installation requirements
Trim and Trim Accessories sold by the piece as needed for the specific installation and includes the installation accessories as noted.