WORK TOOL ATTACHMENTS - Witraktor · WORK TOOL ATTACHMENTS. PRODUCT LINE ... Cat M322D Cat 324D L; Cat 314D Cat ... Cat 318E Cat 328 D LCR; Cat 319D Cat 319D; Cat 329D L …

WORK TOOL ATTACHMENTSPRODUCT LINE (EAME)

2

3

Excavators (Small)

Buckets Width Range Capacity RangeModel mm (in) m3 (yd3)

General Duty 311-316 600-1400 (24-55) 0.31-1.09 (0.40-1.42)Heavy Duty 311-316 450-1400 (18-55) 0.20-1.30 (0.26-1.42)Ditch Cleaning 311-319 1800-2000 (71-79) 0.73-1.00 (0.95-1.30)Ditch Cleaning Tiltable 311-319 1800-2000 (71-79) 0.73-0.84 (0.95-1.09)Skeleton 315-319 1260 (50) 1.09 (1.42)GD Bucket with leveling edge 311-319 800-1200 (31.5-47) 0.5-0.9 (0.65 - 1.2)Profile 315-319 300-500 (12-18) bottom width

Auto-Connect CWAC-40Quick-Coupler Linkage Hydraulic ExcavatorsCWAC-40 - M315-M316CWAC-40 - M318-M322CWAC-40 - 315-318CWAC-40 - 319

311-319

Couplers Width HydraulicModel Hook mm Mechanical

Quick Coupler CW-20-D.4.N in Center 550 MechanicalQuick Coupler CW-20-D.4.N Not in Center 550 MechanicalQuick Coupler CW-20-H.4.N in Center 550 HydraulicQuick Coupler CW-20-H.4.N Not in Center 550 HydraulicQuick Coupler CW-20s-D.4.N in Center 420 MechanicalQuick Coupler CW-20s-D.4.N Not in Center 420 MechanicalQuick Coupler CW-30s-H.4.N in Center 420 HydraulicQuick Coupler CW-30s-H.4.N Not in Center 420 Hydraulic

Tiltable Quick Couplers

DescriptionWidth(mm)

Depth(mm)

Height(mm)

Weight(kg)

Machineweight (ton) Class Model

CWT-30-D.N 1124 809 1029 503 12-21 2-3 M313D-M318D / 311D-319D / 311E-318ECWT-30-H.N 1124 809 1029 512 12-21 2-3 M313D-M318D / 311D-319D / 311E-318E

Lifting hook option2 = 4 tons hook4 = 10 tons hook5 = 14 tons hook6 = 20 tons hook7 = 2 tons hookN = no hook at all

Coupler Model (Linkage)

Lifting Eye

Part Number

Weight

Width (A) at the

machine interface

Width (B) at the

attachment interfaceWorking

Load Limit (WLL)kg (lbs) mm (in) mm (in) kg (lbs)

312 388-6156 188 (414) 381 (15.0) 211 (8.3) 10,000 (22,046)315 391-4347 460 (18.1) 271 (10.7) 10,000 (22,046)B 388-0067 380 (837) 512 (20.2) 302 (11.9) 10,000 (22,046)CB 389-7189 465 (1,025) 550 (21.6) 340 (13.4) 14,000 (30,865)CB - Trenching 389-7526 430 (949) 491 (19.3) 340 (13.4) 14,000 (30,865)DB 389-8070 621 (1,370) 590 (23.2) 380 (15.0) 14,000 (30,865)DB - Narrow profile 388-9724 610 (1,346) 590 (23.2) 340 (13.4) 14,000 (30,865)TB 390-1017 944 (2,082) 665 (26.2) 433 (17.0) 20,000 (44,092)TB - Trenching 390-0904 934 (2,060) 654 (25.8) 433 (17.0) 20,000 (44,092)

A

B

Pin GrabberCoupler Model(Linkage)

PartNumber

Weight Width (A) Width (B)Lifting Eye (WLL)

Working Load Limitkg (lbs) mm (in) mm (in) kg (lbs)

312 388-6156 188 (414) 381 (15.0) 211 (8.3) 10000 (22046)315 391-4347 460 (18.1) 271 (10.7) 10000 (22046)B 388-0067 380 (837) 512 (20.2) 302 (11.9) 10000 (22046)CB 389-7189 465 (1025) 550 (21.6) 340 (13.4) 14000 (30865)CB-Trenching 389-7526 430 (949) 491 (19.3) 340 (13.4) 14000 (30865)DB 389-8070 621 (1370) 590 (23.2) 380 (15.0) 14000 (30865)DB-Narrow profile 388-9724 610 (1346) 590 (23.2) 340 (13.4) 14000 (30865)TB 390-1017 944 (2082) 665 (26.2) 433 (17.0) 20000 (44092)TB-Trenching 390-0904 934 (2060) 654 (25.8) 433 (17.0) 20000 (44092)

4

Excavators (Small)

Shears Force at Throat Jaw OpeningModel kN mm (in)

S320B 312-316 3727 390 (15.36)S325B 316-318 5796 490 (19.29)

Multi-Processors Force at Primary Blade Jaw OpeningJaw Set Model kN (ton) mm (in)Concrete Crusher MP318-CC 315-319 2185 (225) 682 (27.0)Demolition MP318-D 315-319 2292 (230) 736 (29.0)Pulverizer MP318-P 315-319 2378 (250) 820 (32.5)Shear MP318-S 315-319 3659 (370 throat) 322 (12.7)Universal MP318-U 315-319 2721 (300) 468 (18.5)

Secondary Pulverizers Crushing force at tip Jaw Depth Jaw OpeningModel kN mm (in) mm (in)

P215 316-319 1167 722 (28) 838 (33)

Rippers Shank Length Weight RangeModel mm (in) kg (lb)

Excavator Rippers 316-319 992 (39) 330-393 (728-867)

311-319

Demolition and Sorting Grapples Capacity Weight Model m3 (yd3) kg (lb)

G310B 311-316 0.357-0.400 (0.467-0.523) 1045 (2304)G315B 316-318 0.550-0.600 (0.718-0.785) 1395 (3075)G315B WH (Waste Handling) 318 0.8 (1.05) 1450 (3197)G310 GC 311-314 0.4 (0.52) 814 (1795)G313 GC 312-316 0.45 (0.59) 845 (1863)G315 GC 315-318 0.6 (0.78) 1142 (2518)

GSH available in 4 and 5 tine version. GSM only available in 5 tine version.

Grapples (GSH, GSM and G300 series)

G310B and G315B are also available with fixed upper head (Fixed mounting bracket with CW-hinges) for less weight and lower build-up height. G300 GC series is available in both Fixed Upper head with Quick Coupler hinges as well as Flat Top Upper head to mount any mounting bracket

Orange Peel Grapples Capacity RangeModel m3 (yd3)

GSH15B 316-319 400-800 (0.525-1.045)

GSM-22 312-314 300-500 (0.395-0.655)GSM-25 312-320 400-1250 (0.525-1.045)

5

Excavators (Small)311-319

Indexator RototiltRT40B RT60B RT60B RT80

Excavator (tons) 10-16 15-24 15-24 23-30Tiltrotator RT40B x

RT60B x xRT80 x

CW Quick Coupler CW-20 CW-30S Narrow CW-30 CW-40Grapple module None G850B G1060 G1060

Cat 311D Cat M316D Cat M316D Cat 323ECat 312E Cat M322D Cat M322D Cat 324D LCat 314D Cat 315D Cat 315D Cat 324D LNCat M313D Cat 316E Cat 316E Cat 324ECat M315D Cat 318E Cat 318E Cat 328 D LCR

Cat 319D Cat 319D Cat 329D LCat 320E Cat 320E Cat 329D LNCat 323E Cat 323E Cat 329E

Vibratory Plate CompactorsImpulse Force Cycles/min Base Plate Width

Model kN (lbf) mm (in)CVP75 311-319 75 (16508) 2200 737 (29)

Hammers Operating Weight Tool DiameterModel kg (lb) mm (in)

H95Es 311-312 627 (1382) 87.5 (3.4)H110Es 311-315 1017 (2237) 99.5 (3.92)H115Es 312-319 1180 (2596) 109.5 (4.31)

Scan here to see E Series Hammers in

action!

6

Excavators (Medium)320-340

Tiltable Quick Couplers

DescriptionWidth(mm)

Depth(mm)

Height(mm)

Weight(kg)

Machineweight (ton) Class Model

CWT-40-D.N 1124 829 1029 522 19-30 4 320E-323E “B” 320D-329D “CB” / 320E-329E “CB”CWT-40-H.N 1124 813 1029 530 19-30 4 320E-323E “B” 320D-329D “CB” / 320E-329E “CB”CWT-45-D.N 1124 1055 1104 900 27-38 4 328D-329D “CB” / 329E “CB”, 324D-340D “DB” / 324E-336E “DB”CWT-45-H.N 1124 1035 1104 907 27-38 4 328D-329D “CB” / 329E “CB”, 324D-340D “DB” / 324E-336E “DB”

CAG Interface between CW and free hanging grabsFits to Bush size

CAG-40 65x200 CW-40 65x200CAG-40S 65x200 CW-40S 65x200CAG-40 70x281 CW-40 70x281CAG-40S 70x281 CW-40 70x281CAG-40 (‘’B’’) CW-40 B-linkageCAG-40 (‘’CB’’) CW-40 CB-linkageCAG-45S (‘’CB’’) CW-40S CB-linkageCAG-45 (‘’DB’’) CW-45 DB-linkageCAG-45S (‘’DB’’) CW-40S DB-linkageCAG-45 (‘’TB’’) CW-45 TB-linkageCAG-45S (‘’TB’’) CW-45S TB-linkageCAG-55 (‘’TB’’) CW-55 TB-linkageCAG-55 (‘’UB’’) CW-55 UB-linkageCAG-55 (‘’T’’) CW-55 T-linkage

Couplers Width HydraulicModel Hook mm Mechanical

Quick Coupler CW-40-D.4.N in Center 550 MechanicalQuick Coupler CW-40-D.4.N Not in Center 550 MechanicalQuick Coupler CW-40-H.4.N in Center 550 HydraulicQuick Coupler CW-40-H.4.N Not in Center 550 HydraulicQuick Coupler CW-40s-D.4.N in Center 420 MechanicalQuick Coupler CW-40s-D.4.N Not in Center 420 MechanicalQuick Coupler CW-40s-H.4.N in Center 420 HydraulicQuick Coupler CW-40s-H.4.N Not in Center 420 HydraulicQuick Coupler CW-45-D.4.N in Center 690 MechanicalQuick Coupler CW-45-D.4.N Not in Center 690 MechanicalQuick Coupler CW-45-H.4.N in Center 690 HydraulicQuick Coupler CW-45-H.4.N Not in Center 690 HydraulicQuick Coupler CW-45s-D.4.N in Center 550 MechanicalQuick Coupler CW-45s-D.4.N Not in Center 550 MechanicalQuick Coupler CW-45s-H.4.N in Center 550 HydraulicQuick Coupler CW-45s-H.4.N Not in Center 550 Hydraulic

Lifting hook option2 = 4 tons hook4 = 10 tons hook5 = 14 tons hook6 = 20 tons hook7 = 2 tons hookN = no hook at all


General Duty 320-340 600-1650 (24-65) 0.46-2.12 (0.61-2.77)Heavy Duty 320-340 1200-1350 (48-74) 1.19-2.81 (1.56-3.67)Severe Duty 320-340 1200-1350 (48-66) 1.20-2.81 (1.57-3.67)Ditch Cleaning 320-340 1800-2400 (78-95) 0.68-2.68 (1.54-2.61)Ditch Cleaning Tiltable 320-340 2000-2400 (78-95) 1.15-1.43 (1.50-1.87)Skeleton 320-340 1260-1520 (49-60) 1.09-2.01 (1.42-2.62)GD Bucket with leveling edge 320-324 1200-1300 (47-51) 1.20-1.30 (1.56-1.70)Profile 300, 400 and 500 mm bottom width, wing angle from 26.5 to 45 degrees adjustable

7


Auto-Connect CWAC ModelWeight (approx.) CWAC-40 340 kgQC-pins CWAC-40 60 mmWidth CWAC-40 550 mmLength CWAC-40 475 mmHoisting-Hook CWAC-40 10 tTotal Fluid connectings CWAC-40 5Hose couplings High flow CWAC-40 2 x 1”Hose couplings Medium flow CWAC-40 2 x 1/2’Hose couplings Extra / Drain CWAC-40 1 x 1/2”

* Please contact your Caterpillar dealer for couplers for non-current and/or special Cat machines

Matching GuideQuick-Coupler Linkage Hydraulic Excavators*CWAC-40 B 320-323

Orange Peel Grapples Capacity RangeModel m3 (yd3)

GSH15B 320 400-800 (0.525-1.045)GSH20B 320-329 600-1000 (0.785-1.310)GSH22B 324-336 600-1500 (0.785-1.960)

GSM25 312-320 400-1250 (0.525-1.634)GSM35 320-329 600-1500 (0.785-1.960)GSM45 324-336 1000-1250 (1.310-1.634)GSM50 336-340 1250-2000 (1.634-2.615)

Recycling and Demolition Grabs Capacity WeightModel m3 (yd3) Kg (lb)

G315B 320-323 0.8 (1.05) 1395 (3075)G315B WH (Waste Handling) 320-323 0.8 (1.05) 1450 (3197)G320B 320-329 0.9 (1.18) 2250 (4960)G325B 325-336 0.9 (1.18) 2370 (5225)G330B 329-340 1.0 (1.30) 2950 (6504)


Grapples (GSH, GSM, G300 series, GGS and CTV)

G310B and G315B are also available with fixed upper head (fixed mounting bracket) for less weight and lower build-up height.

Coupler Model (Linkage)

Lifting Eye

Part Number

Weight

Width (A) at the

machine interface

Width (B) at the

attachment interfaceWorking

Load Limit (WLL)kg (lbs) mm (in) mm (in) kg (lbs)

312 388-6156 188 (414) 381 (15.0) 211 (8.3) 10,000 (22,046)315 391-4347 460 (18.1) 271 (10.7) 10,000 (22,046)B 388-0067 380 (837) 512 (20.2) 302 (11.9) 10,000 (22,046)CB 389-7189 465 (1,025) 550 (21.6) 340 (13.4) 14,000 (30,865)CB - Trenching 389-7526 430 (949) 491 (19.3) 340 (13.4) 14,000 (30,865)DB 389-8070 621 (1,370) 590 (23.2) 380 (15.0) 14,000 (30,865)DB - Narrow profile 388-9724 610 (1,346) 590 (23.2) 340 (13.4) 14,000 (30,865)TB 390-1017 944 (2,082) 665 (26.2) 433 (17.0) 20,000 (44,092)TB - Trenching 390-0904 934 (2,060) 654 (25.8) 433 (17.0) 20,000 (44,092)

A

B

Pin GrabberCoupler Model(Linkage)

PartNumber

Weight Width (A) Width (B)Lifting Eye (WLL)

Working Load Limitkg (lbs) mm (in) mm (in) kg (lbs)

312 388-6156 188 (414) 381 (15.0) 211 (8.3) 10000 (22046)315 391-4347 460 (18.1) 271 (10.7) 10000 (22046)B 388-0067 380 (837) 512 (20.2) 302 (11.9) 10000 (22046)CB 389-7189 465 (1025) 550 (21.6) 340 (13.4) 14000 (30865)CB-Trenching 389-7526 430 (949) 491 (19.3) 340 (13.4) 14000 (30865)DB 389-8070 621 (1370) 590 (23.2) 380 (15.0) 14000 (30865)DB-Narrow profile 388-9724 610 (1346) 590 (23.2) 340 (13.4) 14000 (30865)TB 390-1017 944 (2082) 665 (26.2) 433 (17.0) 20000 (44092)TB-Trenching 390-0904 934 (2060) 654 (25.8) 433 (17.0) 20000 (44092)

8


Digging Grapples (GGS) Capacity WeightModel L (yd3) Kg (lb)

GGS-25-580 312-323 and M313D-M318D 580 (0.75) 970 (1742)GGS-35-450 316-329 and M315D-M325D 450 (0.58) 1088 (3298)GGS-35-700 316-329 and M315D-M325D 700 (0.915) 1225 (2700)

Transfer Grapples (CTV)Capacity Height Height Spread Spread Shell Weight

CTV Model L closed (mm) open (mm) closed (mm) open (mm) width (mm) KgCTV15-1.0

323E, 324E, 329E, 319D, 320D, 321D, 323D, 324D, 328D, 329D M315D, M316D, M318D, M322D, M318D MH, M322D MH, M325D MH

1000 2220 1630 1860 2150 1030 1305CTV15-1.2 1200 2220 1630 1860 2150 1230 1385CTV15-1.5 1500 2220 1630 1860 2150 1530 1505CTV15-1.7 1700 2220 1630 1860 2150 1730 1586CTV15-1.9 1900 2220 1630 1860 2150 1930 1666CTV15-2.3 2300 2220 1630 1860 2150 2330 1827CTV20-1.3

324E, 329E, 336E, 324D, 328D, 329D, 336D, M325D MH, M325D LMH


329E, 336E, 349E,330D, 336D, 345D, 349D,345C MH, 365B MH

1700 2740 2040 2265 2640 1250 2484CTV30-1.9 1900 2740 2040 2265 2640 1370 2544CTV30-2.3 2300 2740 2040 2265 2640 1650 2684CTV30-2.7 2700 2740 2040 2265 2640 1950 2834CTV30-2.9 2900 2740 2040 2265 2640 2050 2884CTV30-3.1 3100 2740 2040 2265 2640 2200 2959CTV30-3.8 3800 2935 2090 2605 3020 1950 2998

Multi-Processors Force at Primary Blade Jaw OpeningJaw Set Model kN ton mm (in)Concrete Crusher MP30 336 4100 (411) 975 (38.0)Crusher MP30 336 3800 (381) 1050 (41.0)Primary Pulverizer MP30 336 3950 (396) 960 (38.0)Secondary Pulverizer MP30 336 4800 (482) 1100 (43.0)Shear MP30 336 3750 (376) 470 (19.0)Tank Shear MP30 336 4000 (401) 210 (20.0)

Concrete Crusher MP318-CC 318-324 2185 (220) 682 (27.0)Demolition MP318-D 318-324 2292 (230) 736 (29.0)Pulverizer MP318-P 318-324 2378 (240) 820 (32.5)Shear MP318-S 318-324 3659 (367 throat) 322 (12.7)Universal MP318-U 318-324 2721 (273) 468 (18.5)

Concrete Crusher MP324-CC 320-340 3129 (314) 826 (32.5)Demolition MP324-D 320-340 3139 (315) 903 (35.5)Pulverizer MP324-P 320-340 3276 (329) 964 (38.0)Shear MP324-S 320-340 3781 (380 throat) 642 (25.3)Universal MP324-U 320-340 3424 (344) 394 (15.5)Tank Shear MP324TS 320-340 2944 (293 throat) 347 (13.5)

9

Excavators (Medium)


P215 320-324 1167 722 (28) 838 (33)P225 324-336 1706 899 (35) 1018 (40)P235 336 1863 1103 (43) 1214 (48)


S320B 320-329 3706 409 (16)S325B 316-336 5562 528 (21)S340B 320-340 6818 563 (22)

Vibratory Plate CompactorsImpulse Force Cycles/min Base Plate Width

Model kN (lbf) mm (in)CVP110 320-336 110 (24669) 2200 864 (34)

Hammers Operating Weight Blow Rate Tool DiameterModel kg (lb) blows/min mm (in)

H115E s 320 1170 (2579) 370-800 109 (4.31)H120E s 320 -329 1600 (3527) 350-620 119 (4.70)H130E s All 1910 (4211) 320-600 130 (5.0)H140E s 324-336 2350 (5170) 350-600 140 (5.51)H160E s 336 3150 (6946) 380-560 160 (6.30) Scan here to see

E Series Hammers in action!

Scan here to see Secondary Pulverizers in action!

Concrete Crushers Crushing force (kN) Jaw Depth Jaw OpeningModel at tip at cutter mm mm

P315 320-324 883 1863 657 731P325 320-336 1226 2893 753 855P335 329-340 1570 3481 877 983

Excavator Rippers Shank Length Weight RangeModel mm (in) kg (lb)

Excavator All 1084/1290 (43-51) 419-875 (924-1929)

320-340

10

Excavators (Large) 345-390


General Duty 345-390 1370-2000 (539-787) 1.87-4.60 (2.44-6.01)Heavy Duty 345-390 1500-1750 (590-689) 2.14-4.10 (2.80-5.36)Severe Duty 345-390 1550-2240 (610-882) 2.14-5.40 (2.80-7.06)Extreme Duty 345-390 1550-2090 (610-822) 2.61-6.00 (3.41-5.50)

Multi-Processors Force at Primary Blade Jaw OpeningJaw Set Model kN mm (in)

Concrete Crusher (CR) MP30 345-349 4100 975 (38)MP40 349 4400 1280 (50)

Crusher (CC) MP30 345-349 3800 1050 (41)MP40 349 4650 1320 (52)

Primary Pulverizer (PP) MP30 345-349 3950 960 (38)

Secondary Pulverizer (PS) MP30 345-349 4800 1100 (43)MP40 349 5500 1400 (55)

Shear (S) MP30 345-349 3750 470 (19)MP40 349 4750 630 (25)

Tank Shear (TS) MP30 345-349 4000 210 (20)


H160E s 345 3150 (6946) 380-560 160 (6.30)H180E s 345-374 3800 (8360) 370-520 174 (6.85)

Secondary PulverizersCrushing force at tip Jaw Depth Jaw Opening

Model kN mm (in) mm (in)P235 345-349 1863 1103 (43) 1214 (48)

Concrete Crushers Crushing force (kN) Jaw Depth Jaw OpeningModel at tip at cutter mm (in) mm (in)

P335 345-349 1570 3481 877 (34.52) 983 (38.70)P360 349-374 2060 4462 933 (36.73) 1201 (47.28)

Couplers Weight HydraulicModel Linkage kg Mechanical

Quick Coupler CW-55-D.6.N TB 742 MechanicalQuick Coupler CW-55-H.6.N TB 762 HydraulicQuick Coupler CW-55-D.6.N UB 830 MechanicalQuick Coupler CW-55-H.6.N UB 840 HydraulicQuick Coupler CW-70-H.6.N VB 1320 HydraulicQuick Coupler CW-70-H.6.N WB 1320 HydraulicQuick Coupler CW-70-H.6.N HB 1217 HydraulicQuick Coupler CW-70-H.6.N JC 1479 Hydraulic

Lifting hookoption2 = 4 tons hook4 = 10 tons hook5 = 14 tons hook6 = 20 tons hook7 = 2 tons hookN = no hook at all

11

Excavators (Large) 345-390


CTV30 Model L closed (mm) open (mm) closed (mm) open (mm) width (mm) KgCTV30-1.7

329E, 330D, 336D,336E, 345D, 349D, 349E

345C MH, 365B MH

1700 2740 2040 2265 2640 1250 2484CTV30-1.9 1900 2740 2040 2265 2640 1370 2544CTV30-2.3 2300 2740 2040 2265 2640 1650 2685CTV30-2.7 2700 2740 2040 2265 2640 1950 2843CTV30-2.9 2900 2740 2040 2265 2640 2050 2884CTV30-3.1 3100 2740 2040 2265 2640 2200 2959CTV30-3.8 3800 2935 2090 2605 3020 1950 2998

CTV40CTV40-3.5

349E, 345D, 374D, 385C MH

3500 3080 2257 2643 3060 1800 4087CTV40-4.0 4000 3080 2257 2643 3060 2050 4312CTV40-4.5 4500 3080 2257 2643 3060 2300 4451CTV40-5.0 5000 3080 2257 2643 3060 2550 4634CTV40-6.1 6100 3298 2314 3020 3480 2300 4697

Scan here for animation of Shear with Bolt-on

Piercing Tip!

Only available in 5 tine version.

GSM Grapples Capacity RangeModel m3 (yd3)

GSM60 345-374 3750 (4.905)

Capacity WeightModel m3 (yd3) kg (lb)

G330 345-349 1.000 (1.30) 2950 (6504)

Recycling and Demolition Grabs


Excavator All 1017-1801 (40-71) 1052-2196 (2319-4841)

Concrete Crushers Crushing force (kN) Jaw Depth Jaw OpeningModel at tip at cutter mm (in) mm (in)

P360 349-374 2060 4462 933 (36.73) 1201 (47.28)


S340B 345-349 6818 563 (22)S365C 345-349 10342 879 (35)S385C 349 12509 879 (35)

12

Vibratory Plate Compactors Impulse ForceCycles/min

Base Plate WidthModel kN lbf mm (in)

CVP75 M313-M318 74 (16508) 2200 737 (29)CVP110 M322 110 (24669) 2200 864 (34)

Scan here to see Orange Peel

Grapples in action!

Excavators (Wheeled) M313-M325


General Duty M313-M318 600-1400 (23.62-55.11) 0.36-1.09 (0.47-1.83)Heavy Duty M313-M318 500-1400 (19-68-55.11) 0.24-1.09 (0.31-1.83)Severe Duty M318 1400 (55.11) 1.09 (1.42-2.61)Extreme Duty M318 1400 (55.11) 1.09 (1.42-2.61)Ditch Cleaning M313-M318 1800-2000 (70.86-78.73) 0.63-0.84 (0.82-1.09)Ditch Cleaning Tiltable M313-M318 1800-2000 (70.86-78.73) 0.63-0.84 (0.82-1.09)Profile M313-M318 300, 400 or 500 mm bottom widthSkeleton M313-M318 1260 (49.60) 1.09 (1.42)

Couplers Hydraulic/Model Hook Width Mechanical

Quick Coupler CW-20-D.4.N in Center 550 MechanicalQuick Coupler CW-20-D.4.N Not in Center 550 MechanicalQuick Coupler CW-20-H.4.N in Center 550 HydraulicQuick Coupler CW-20-H.4.N Not in Center 550 HydraulicQuick Coupler CW-20s-D.4.N in Center 420 MechanicalQuick Coupler CW-20s-D.4.N Not in Center 420 MechanicalQuick Coupler CW-30s-H.4.N in Center 420 HydraulicQuick Coupler CW-30s-H.4.N Not in Center 420 HydraulicQuick Coupler CW-40-D.4.N in Center 550 MechanicalQuick Coupler CW-40-D.4.N Not in Center 550 MechanicalQuick Coupler CW-40-H.4.N in Center 550 HydraulicQuick Coupler CW-40-H.4.N Not in Center 550 HydraulicQuick Coupler CW-40s-D.4.N in Center 420 MechanicalQuick Coupler CW-40s-D.4.N Not in Center 420 MechanicalQuick Coupler CW-40s-H.4.N in Center 420 HydraulicQuick Coupler CW-40s-H.4.N Not in Center 420 HydraulicQuick Coupler CW-45-D.4.N in Center 490 MechanicalQuick Coupler CW-45-D.4.N Not in Center 490 MechanicalQuick Coupler CW-45-H.4.N in Center 490 HydraulicQuick Coupler CW-45-H.4.N Not in Center 490 HydraulicQuick Coupler CW-45s-D.4.N in Center 550 MechanicalQuick Coupler CW-45s-D.4.N Not in Center 550 MechanicalQuick Coupler CW-45s-H.4.N in Center 550 HydraulicQuick Coupler CW-45s-H.4.N Not in Center 550 Hydraulic

* Please contact your Caterpillar dealer for couplers for non-current and/or special Cat machines.

Auto-Connect CWAC ModelWeight (approx.) CWAC-40 340 kgQC-pins CWAC-40 60 mmWidth CWAC-40 550 mmLength CWAC-40 475 mmHoisting-Hook CWAC-40 10 tTotal Fluid connectings CWAC-40 5Hose couplings High flow CWAC-40 2 x 1”Hose couplings Medium flow CWAC-40 2 x 1/2’Hose couplings Extra / Drain CWAC-40 1 x 1/2”

Matching GuideQuick-Coupler Hydraulic Excavators*CWAC-40 M315-M322

Orange Peel Grapples Capacity RangeModel liter (yd3)

GSH15B M315-M322-MH 400-800 (0.525-1.045)GSH20B M318-M325 600-1000 (0.785-1.310)GSH22B M325-MH 600-1500 (0.785-1.960)


Grapples (GSH, GSM and G300 series)


Excavator M315-M322 992-1084 (39-43) 330-456 (728-1006)

13

14

Excavators (Wheeled)


H110E s M313-M316, M316F, M318F 1010 (2227) 450-1000 99 (3.92)H115E s M315-M322, M316F, M318F, M320F 1170 (2579) 370-800 109 (4.31)H120E s M315-M322, M316F, M318F, M320F 1600 (3527) 350-620 119 (4.70)H130E s M318-M322, M320F 1910 (4211) 320-600 130 (5.0)


S320B M315-M318, M316F, M318F, M320F 3706 409 (16)S325B M315-M318, M316F, M318F, M320F 5562 528 (21)S340B M318-M322, M320F 6818 563 (22)



GSM22 M313-M325 300-500 (0.392-0.654)GSM25 M313-M322, M316F, M318F 400-800 (0.523-1.05)GSM45 M325 1000-1250 (1.5-1.634)


GGS-25-580 312-323 and M313D-M318D ,M316F, M318F 580 (0.75) 970 (1742)GGS-35-450 316-329 and M315D-M325D ,M316F, M318F, M320F 450 (0.58) 1088 (3298)GGS-35-700 316-329 and M315D-M325D 700 (0.915) 1225 (2700)


CTV Model L closed (mm) open (mm) closed (mm) open (mm) width (mm) KgCTV15-1.0

M315D, M316D, M318D, M322D, M318D MH, M322D MH, M325D MH, M316F, M318F, M320F


M325D MH, M325D LMH

1300 2440 1792 2074 2400 1100 1766CTV20-1.5 1500 2440 1792 2074 2400 1250 1835CTV20-1.7 1700 2440 1792 2074 2400 1400 1896CTV20-1.9 1900 2440 1792 2074 2400 1550 1959CTV20-2.3 2300 2440 1792 2074 2400 1900 2110CTV20-2.7 2700 2440 1792 2074 2400 2200 2238

Hydraulic Crusher Crushing force (kN) Jaw Depth Jaw OpeningModel at tip at cutter mm (in) mm (in)

P315 M315-M322, M316F, M318F, M320F 882 1863 657 (-) 731 (-)


P215 M315-M322, M316F, M318F, M320F 1167 722 (28) 838 (33)

Multi-Processors Force at Primary Blade Jaw OpeningJaw Set Model kN (ton) mm (in)Concrete Crusher MP318-CC M315-M319 2251 (225) 685 (27.0)Demolition MP318-D M315-M319 2255 (230) 740 (29.0)Pulverizer MP318-P M315-M319 2451 (250) 820 (32.3)Shear MP318-S M315-M319 3628 (370 throat) 350 (13.8)Universal MP318-U M315-M319 2742 (300) 470 (18.5)

Demolition and Sorting Grapples Capacity WeightModel m3 kg

G315B M318D-M322D, M316F,M318F, M320F 0.8 2030G320B M325D- M325D LMH 0.9 2250G325B M325-M336 0.9 2370G315B WH (Waste Handling) 318, M316F,M318F, M320F 0.8 1450G310 GC M313D 0.4 865G313 GC M316F, M318F 0.45 895G315 GC M316F, M318F,M320F 0.6 1200

15

Excavators Mobile / Material Handler


H115E s MH3022, MH3024 1170 (2579) 370-800 109 (4.31)H120E s MH3022, MH3024 1600 (3527) 350-620 119 (4.70)H130E s MH3024 1910 (4211) 320-600 130 (5.0)


S320B MH3022, MH3024 3706 409 (16)S325B MH3022, MH3024 5562 528 (21)S340B MH3022, MH3024 6818 563 (22)



GSM25 MH3022, MH3024 400-800 (0.523-1.05)


GGS-35-450 MH3022, MH3024 450 (0.58) 1088 (3298)GGS-35-700 MH3022, MH3024 700 (0.915) 1225 (2700)


CTV Model L closed (mm) open (mm) closed (mm) open (mm) width (mm) KgCTV15-1.0 MH3022, MH3024 1000 2220 1630 1860 2150 1030 1305CTV15-1.2 MH3022, MH3024 1200 2220 1630 1860 2150 1230 1385CTV15-1.5 MH3022, MH3024 1500 2220 1630 1860 2150 1530 1505CTV15-1.7 MH3022, MH3024 1700 2220 1630 1860 2150 1730 1586CTV15-1.9 MH3022, MH3024 1900 2220 1630 1860 2150 1930 1666CTV15-2.3 MH3022, MH3024 2300 2220 1630 1860 2150 2330 1827

Hydraulic Crusher Crushing force (kN) Jaw Depth Jaw OpeningModel at tip at cutter mm (in) mm (in)

P315 MH3022, MH3024 882 1863 657 (-) 731 (-)


P215 MH3022, MH3024 1167 722 (28) 838 (33)

Multi-Processors Force at Primary Blade Jaw OpeningJaw Set Model kN (ton) mm (in)Concrete Crusher MP318-CC MH3022, MH3024 2251 (225) 685 (27.0)Demolition MP318-D MH3022, MH3024 2255 (230) 740 (29.0)Pulverizer MP318-P MH3022, MH3024 2451 (250) 820 (32.3)Shear MP318-S MH3022, MH3024 3628 (370 throat) 350 (13.8)Universal MP318-U MH3022, MH3024 2742 (300) 470 (18.5)

Demolition and Sorting Grapples Capacity WeightModel m3 kg

G315B MH3022, MH3024 0.800 2030G315B WH MH3022 0.8 1450G315 GC MH3022 0.6 1200

16

Wheel Loaders (Medium)


Material Handling Performance Series 938-980 2700 - 3580 106 - 141 2.6 - 6.1 3.4 - 8.0Material Handling Heavy Duty Performance Series 972 3201 - 3289 90.5 - 94 4.8 - 5.7 6.3 - 7.5General Purpose 938 2555 - 2689 100.5 - 106 2.5 - 3.1 3.3 - 4General Purpose Heavy Duty Performance Series 980 3413 134 5.9 7.8Rock Performance Series 950 - 980 2969 - 3645 117 - 143.5 3.2 - 5.9 4.3 - 7.8Rock Heavy Duty Performance Series 972 3252 128 4.4 5.8Coal Performance Series ^ 938 - 972 3040 - 3405 120 - 134 4.0 - 8.5 5.2 - 11.0Slag LWL onlySkeleton GD 938 - 962 2850 - 3100 112 - 122 2.5 - 3.0 3.3 - 3.9Skeleton HD 950 - 972 3150 - 3300 124 - 130 3.3 - 3.9 4.0 - 5.1Woodchip 950 - 982 3200 - 4000 126 - 157.5 7.0 - 25 9.0 - 33.0High Dump 938 - 972 2896 - 3205 114 - 126 3.6 - 6.7 4.7 - 8.7Serrated Edge Performance Series 980 3492 137.5 5.0 - 5.6 6.5 - 7.5Grapple bucket 938 - 966 2692 - 3032 106 - 119 2.6 - 3.4 3.4 - 4.5Aggregate Bucket Performance Series 962 - 982 2914 - 3590 115 - 141 3.4 - 8.3 5.0 - 10.8

* Performance Series bucket capacities are calculated with a 110% fill factor. All other bucket capacities are calculated based on ISO standard. ^ Performance Series buckets 950-982 machines only.

Couplers WeightModel kg (lb)

Fusion 950-972 564-566 (1244-1248)SW2000 Series All 372-950 (820-2095)ISO Coupler All 450-450 (990-990)

Forks Tine Length Carriage WidthModel mm (in) mm (in)

Pallet All 1219-2438 (48-96) 2134-2845 (84-112)

Material Handling ArmsRetracted Length Extended Length

Model mm (in) mm (in)Extendible All 3061 (120) 4585 (180)

Scan here to see the Fusion Coupler

in action!

Scan here to see Performance Series Buckets in action!

950-982

Logging Forks Overall width End Area WeightModel mm (in) m2 kg

Logging Fork 950-962 2269 (89.33) 2.1 2269Logging Fork 966 2419 (95.23) 2.1 2340Logging Fork 980 2802 (110.31) 2.4 3207

17

Dimensions Weight Max LoadModel width (mm) Thickness length (mm) (kg) (ton)

Coupler BH 980 1675 n.a. n.a. 1190 n.aCoupler BH 988 2000 n.a. n.a. 1500 n.aFork 980 1782 105 1505 1810 30Fork 986 1795 145 1745 2629 53Fork 988 1620 125 1760 2890 35Fork 988 1742 145 1760 4048 50Breaker Tine 980 n.a 200 1100 1650 -Breaker Tine 988 n.a 250 1251 2700 70Rake 980 n.a. n.a. 6000 n.a n.aRake 988 n.a. n.a. 8000 n.a n.a

Wheel Loaders (Large)

Buckets Width Range Capacity Range

Model mm (in) m3 (yd3)General Purpose 986-988 3695-3855 145.5 - 152 6.10-8.40 8 - 11.0Rock 986-994 3812 -6220 150 - 245 5.40-19.0 7HD Rock 986-992 4014-4670 158 - 184 5.4-8.6 7 - 11.2XD Rock 986 4146 163 5.0 6.5Coal 986-994 3692-6300 145 - 248 10.3-36.0 13.5 - 47Serrated Edge 986-993 3812-5080 150 - 200 6.1-14.9 8 - 19.5HD Granite 988-993 3988-5160 157 - 203 4.6-13.0 6.0 - 17Iron Ore 988-993 3940-5160 155 - 203 4.4-10.0 5.7 - 13Slag 988-990 4032-4500 159 - 177 6.40-8.60 8.5 - 11High Abrasion 992 5080 200 10.7 14

Couplers WeightModel (kg) (lb)

Block Handling 980H 1190 (2623)Block Handling 986H 1252 (2760)Block Handling 988H 1500 (3306)

986-994

DimensionsModel width (mm) capacity (cum) weight (kg)

Rock Bucket 980 3645 4.8 3800Marble Bucket 980 3645 5.1 4200Block Bucket 980 3805 6.8 4500Rock Bucket 986 3812 5.4 4366Rock Bucket 988 3800 6.6 4200Marble Bucket 988 4040 6.9 4700Block Bucket 988 3950 9.0 6000

Block Handling Tools 980-988

18

Track Type Tractors (TTT)

BladesCapacity Width Height Wing angle Weight

Straight Blades m3 (yd3) mm (inch) mm (inch) deg. kg (lbs)D6D7814824834

Semi U-BladesD6T LGP 6.9 9.0 4267 168 1270 50 25 1905 4200D7R LGP 7.8 10.3 4496 177 1397 55 30 1928 4250

Coal U-BladesD6T 9.7 12.6 4267 168 1473 58 30 1497 3300D7E 14.8 19.4 4902 193 1767 70 30 2420 5335D7E LGP 14.8 19.4 4902 193 1772 70 30 2592 5714D7R 13.4 17.5 4953 195 1626 64 30 2404 5300D8T 21.4 28.0 5512 217 1981 78 30 3524 7770D8R 21.4 28.0 5537 218 1981 78 30 3198 7050D8R LGP 21.4 28.0 5537 218 1981 78 30 3198 7050D9T/R 36.7 48.0 5740 226 2565 101 30 4491 9900D9T/R 36.8 48.1 5740 226 2565 101 30 5080 11200D10T/R/N 52.0 68.0 6731 265 2794 110 30 6895 15200D11T/R 63.5 83.0 6858 270 3073 121 30 10659 23500D11T/R 65.8 86.0 7366 290 3048 120 30 10659 23500D11T/R 74.9 98.0 8179 322 3048 120 30 11503 25360

Reclamation BladesD8R 16.4 21.5 4877 192 1880 74 28 3810 8400D10T/R, D10N 30.6 40.0 5690 224 2413 95 28 6441 14200D11T/R 53.5 70.0 7290 287 2794 110 30 11476 25300

Woodchip BladesD6T 15.3 20.0 4267 168 1880 74 30 1905 4200D7E 23.8 30.8 4902 193 2279 90 30 2731 6020D7E LGP 23.8 30.8 4902 193 2284 90 30 2896 6384D8T 28.3 37.0 5486 216 2337 92 30 3499 7713D8R 28.3 37.0 5486 216 2337 92 30 2926 6450D9T/R 45.9 60.0 5461 215 3099 122 30 5080 11200D10T/R, D10N 72.6 95.0 6731 265 3353 132 30 7530 16600

Landfill BladesD7R 18.4 23.7 4267 168 2184 86 30 2567 5660D8T 23.7 31.0 5512 217 2083 82 30 3642 8030D8R 23.3 30.5 4928 194 2286 90 30 3311 7300D9T/R 38.2 50.0 5436 214 2184 86 30 4218 9300

Cushion Dozer BladesD9T/R - - 3048 120 1575 62 - 4273 9420D10T/R - - 3505 138 1778 70 - 6114 13480

19

AEXQ0931-08 (07-15)

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com

©2015 Caterpillar Inc. All rights reserved. CAT, CATERPILLAR, their respective logos, ‘’Caterpillar Yellow’’ and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Documents

WORK TOOL ATTACHMENTS - Witraktor · WORK TOOL ATTACHMENTS. PRODUCT LINE ... Cat M322D Cat 324D L; Cat 314D Cat ... Cat 318E Cat 328 D LCR; Cat 319D Cat 319D; Cat 329D L …