WORKBOAT RANGE - Barrus...Engine Range Engine Model 15RB 20RB 30WB 40WB 50WB 70WB 85WB 130WB Cylinders 2 3 3 4 4 4 4 6 Horsepower 15 20 30 40 50 70 85 …

W O R K B O AT R A N G E

Engine RangeEngine Model 15RB 20RB 30WB 40WB 50WB 70WB 85WB 130WBCylinders 2 3 3 4 4 4 4 6Horsepower 15 20 30 40 50 70 85 130RPM 2800 2800 3000 2600 3000 2500 2500 2500Cylinder CC 749 1123 1331 2190 2190 3319 4500 6800STANDARD SPECIFICATIONHeat Exchanger Cooled Standard Standard Standard Standard Standard Standard Standard StandardManifold Wet Wet Dry Dry / Wet Wet Dry Dry DryFresh and Sea Water Pumps Standard Standard Standard Standard Standard Standard Standard StandardWater Injection Bend Standard Standard Standard Standard Standard Standard Standard Standard12 Volt Electric Start Standard Standard Standard Standard Standard Standard Standard Standard24 Volt Electrical Start No No No Option Option Option Option OptionAlternator (12 Volt) 50 Amp 50 Amp 50 Amp 50 Amp 50 Amp 50 Amp 120 Amp 120 AmpStart / Stop Panel STD Basic STD Basic STD Basic STD Basic STD Basic Deluxe Deluxe DeluxeAir Cleaner/Silencer Standard Standard Standard Standard Standard Standard Standard StandardSump Drain Pump Standard Standard Standard Standard Standard Standard Standard StandardMorse Type Connectors Standard Standard Standard Standard Standard Standard Standard StandardAVM’s for Smooth Running Standard Standard Standard Standard Standard Standard Standard StandardFlexible Fuel Lines Standard Standard Standard Standard Standard Standard Standard StandardRemote Header Tank Kit Standard Standard Standard Standard Standard Standard Standard StandardGEARBOXPRM 80 Mechanical Standard Standard No No No No No NoPRM 120 Mechanical No No Option No No No No NoPRM 150 Hydraulic No No Standard Standard Standard No No NoPRM 260 Hydraulic No No No Option Option Standard Standard NoPRM 500 Hydraulic No No No No No Option Option Standard

Workboat Engine Range November 2014

Engine Model 15RB 20RB 30WB 40WB 50WB 70WB 85WB 130WBWith Standard Gearbox £3,244.00 £3,744.00 £4,494.00 £5,869.00 £6,619.00 £7,869.00 £8,994.00 £12,494.00With PRM 80 Gearbox Standard Standard N/A N/A N/A N/A N/A N/AWith PRM 120 Gearbox N/A N/A £4,185.00 N/A N/A N/A N/A N/AWith PRM 150 Gearbox N/A N/A Standard Standard Standard N/A N/A N/AWith PRM 260 Gearbox N/A N/A N/A £6,400.00 £7,070.00 Standard Standard N/AWith PRM 500 Gearbox N/A N/A N/A N/A N/A £8,140.00 £9,465.00 StandardDeluxe Panel £100.00 £100.00 £100.00 £100.00 £100.00 Included Included IncludedAdditional Extension Harness £29.00 £29.00 £29.00 £29.00 £29.00 £29.00 £29.00 £29.00Shaft Extension PTO £156.00 £156.00 £156.00 £156.00 £156.00 £156.00 £156.00 £156.00Single Lever Control Head(side mounted) £89.00 £89.00 £89.00 £89.00 £89.00 £89.00 £89.00 £89.00

3 Metre Control Cable (x2) £14.00 £14.00 £14.00 £14.00 £14.00 £14.00 £14.00 £14.00

Price List

Doc No. 11/2014

OVER £250 WORTH OF “EXTRAS” INCLUDED IN OUR STANDARD PRICE. OUR STANDARD “EXTRAS” INCLUDE:-

Remote coolant header tank | Flexible fuel line (2 x 1m) | Diesel fuel filter/water separator | Electric fuel lift pump | Engine oil | Engine coolant/anti-freeze | Stainless steel water injection exhaust elbow

All prices shown are ex works and are excluding VAT and subject to the Terms & Conditions of E. P. Barrus Ltd.E. P. Barrus Ltd., Glen Way, Launton Road, Bicester,Oxfordshire, OX26 4UR

Email: [email protected] or [email protected]: 01869 363636 Fax: 01869 363673 www.barrus.co.uk

E. P. BARRUS LTD. reserve the right to change the specification and/or prices without prior notice.

The Power Behind the Brands

Specifications l 2 Cylinder Propulsion Engine

l 15 hp @ 2800 rpm

l Displacement 749 cc

l 150 hour oil and filter change period

l PRM80 Mechanical gearbox

l 50 amp 12V alternator

l Fully dyno tested

l Control panel with warning lights

l Multi engine footprint design enabling ease of repower installations

l 2 Year Warranty on engine and components

l 1 Year Warranty on all electrical components

Accessories IncludedRemote coolant header tankFlexible fuel line (2 x 1m)Engine oilEngine coolant / anti-freezeStainless steel water injection exhaust elbow

Shire 15 RB

Doc No. 15RB-01, 09/2014

Dealer Stamp

E. P. Barrus Ltd., Launton Road, Bicester,Oxfordshire, OX26 4UREmail: [email protected] or [email protected]

Tel: 01869 363636 Fax: 01869 363673 www.barrus.co.ukE. P. BARRUS LTD. reserve the right to change the specification and/or prices without prior notice.


ISO 9001

BUREAU VERITASCertification

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8A A

B B

C C

D D

E E

F F

CHK.DRN.

DO NOT SCALE - IF IN DOUBT, ASKGENERAL SURFACE FINISH Ra 1.6μm

THIRD ANGLE

0.0°

0.00.00

±0.25±0.10

±0.50

±0.25°DCN

Shire 15 20RB - 2 Cyl.TITLE

GENERAL TOL.NOT FOR PUBLICATION - THIS DRAWING IS THE

PROPERTY OF E. P. BARRUS LTD. AND IS ISSUED ONCONDITION THAT IT IS NOT COPIED, RE-PRINTED

OR DISCLOSED EITHER WHOLLY OR IN PART TO ANYTHIRD PARTY NOT AUTHORISED TO RECEIVE IT.

1 of 1 MATERIAL & FINISH

CRITICAL DIMENSIONS IDENTIFIED DIMENSIONS: mm

© E. P. BARRUS LIMITEDDETAILSDATEISSUE

SCALE:REMOVE ALL BURRS & SHARP EDGES 0.25 X 45°

0 SIZE A3

INSPECTION LEVEL:

SHEET:

DATE

DRAWNCHECKED

ISSUE

DRAWING NUMBER

PROJECT:

BY

Shire20 - 2 cyl.

45 10

100

18

375435

155

660

380

620

70

10.54 pos.

63.5 102.0

20 65

175

40 80

505

430

Additional Standard Specification

Dimensions

Optional Accessories Standard Basic Control Panel

Naturally aspirated, 2 cylinder, 4 cycle in-line water-cooled diesel142 kg dry weightFuel filter with water drainFull size replaceable air filter for maximum filtration and noise reductionEngine driven raw water pump, 3/4'' (19 mm) hosetailEasy access to service items from top of engine (filters, anodes, fuses, water pump)Morse 33C compatible engine speed and shift control connections

Engine sump oil drain pumpElectrical extension loom - 2.3 metresHeat exchanger water cooled exhaust manifold with stainless steel water injected elbow 50mm (2’’) outletAnti vibration mounts and adjusting screwsOwners handbook2 and 3D full CAD installation drawings availableDelivered on standard euro pallet

Crank mounted stub shaft for PTO (size optional)Deluxe control panel, which includes specification of basic panel with additional oil pressure, water temp, gauges and voltmeterSeawater strainerRemote shift control and cablesGearbox ratio optionsFlexible output couplingVarious prop and stern gear componentsCalorifier connections70 amp alternatorAdditional beltHydraulic drive system


l 20 hp @ 2800 rpm





l Fully dyno tested


l Multi engine footplate design enabling ease of repower installations



Accessories IncludedRemote coolant header tankFlexible fuel line (2 x 1m)Engine oilEngine coolant / anti-freezeStainless steel water injection exhaust elbow

Shire 20 RB

Doc No. 20RB-01, 02/2014

Dealer Stamp

Dimensions




ISO 9001


1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8A A

B B

C C

D D

E E

F F

CHK.DRN.

DO NOT SCALE - IF IN DOUBT, ASKGENERAL SURFACE FINISH Ra 1.6μm

THIRD ANGLE

0.0°

0.00.00

±0.25±0.10

±0.50

±0.25°DCN

Shire 15 20RB - 3 Cyl.TITLE

GENERAL TOL.NOT FOR PUBLICATION - THIS DRAWING IS THE

PROPERTY OF E. P. BARRUS LTD. AND IS ISSUED ONCONDITION THAT IT IS NOT COPIED, RE-PRINTED

OR DISCLOSED EITHER WHOLLY OR IN PART TO ANYTHIRD PARTY NOT AUTHORISED TO RECEIVE IT.

1 of 1 MATERIAL & FINISH

CRITICAL DIMENSIONS IDENTIFIED DIMENSIONS: mm

© E. P. BARRUS LIMITEDDETAILSDATEISSUE

SCALE:REMOVE ALL BURRS & SHARP EDGES 0.25 X 45°

0 SIZE A3

INSPECTION LEVEL:

SHEET:

DATE

DRAWNCHECKED

ISSUE

DRAWING NUMBER

PROJECT:

BY

Shire20 - 3 Cyl.

45 10

100

18

370434

160

750

470

655

69

10.54 pos.

63.5 102.0

20 67

230

40 81

239 214



Naturally aspirated, 3 cylinder, 4 cycle inline water-cooled diesel160 kg dry weightFuel filter with water drainFull size replaceable air filter for maximum filtration and noise reductionEngine driven raw water pump, 3/4'' (19 mm) hosetailEasy access to service items from top of engine (filters, anodes, fuses, water pump)Morse 33C compatible engine speed and shift control connections

Engine sump oil drain pumpElectrical extension loom - 2.3 metresHeat exchanger water cooled exhaust manifold with stainless steel water injected elbow 50mm (2’’) outletAnti vibration mounts and adjusting screwsOwners handbook2 and 3D full CAD installation drawings availableDelivered on standard euro pallet

Crank mounted stub shaft for PTO (size optional)Deluxe control panel, which includes specification of basic panel with additional oil pressure, water temp, gauges and voltmeterSeawater strainerRemote shift control and cablesGearbox ratio optionsFlexible output couplingVarious prop and stern gear componentsCalorifier connections70 amp alternatorAdditional beltHydraulic drive system

Shire 30 Workboat


l Yanmar 3TNV Base Engine

l 30 hp @ 3000 rpm





l Fully dyno tested




Accessories IncludedRemote coolant header tankFlexible fuel line (2 x 1m)Diesel fuel filter / water separatorElectric fuel lift pumpEngine oilEngine coolant / anti-freezeStainless steel water injection exhaust elbow

Doc No. 30WB-PRM120-01, 02/2014


Dimensions


Naturally aspirated, 3 cylinder, 4 cycle inline water-cooled dieselYanmar 3TNV82A BDSA base engine227 kg dry weightFull size replaceable air filter for maximum filtration and noise reductionEngine driven raw water pumpEasy access to service items from top of engine (filters, anodes, fuses, water pump)

Flexible fuel lines, comply with ISO 7840Morse 33C compatible engine speed and shift control connectionsEngine sump oil drain pumpElectrical extension loom - 2.3 metresAnti vibration mounts and adjusting screwsOwners handbook2 and 3D full CAD installation drawings availableDelivered on standard euro pallet

PK6 crankshaft pulley providing a drive for additional pump, alternator etc.Crank mounted stub shaft for PTO (32mm)SAE 9T gear driven PTO, at 0.9 engine speedDeluxe control panel, which includes specification of basic panel with additional oil pressure, water temp, gauges and voltmeterSeawater strainerRemote shift control and cablesGearbox ratio optionsFlexible output couplingVarious prop and stern gear componentsCalorifier connectionsGearbox upgrade70 amp alternatorDomestic travel power up to 5kW 230VCrankshaft driven saltwater pumpHydraulic drive system

Dealer Stamp




ISO 9001


Shire 40 Workboat



l 40 hp @ 2600 rpm



l PRM150 Hydraulic gearbox


l Fully dyno tested





Doc No. 40WB-01, 02/2014

Dimensions



Naturally aspirated, 4 cylinder, 4 cycle in-line water-cooled diesel270 kg dry weightFull size replaceable air filter for maximum filtration and noise reduction50 amp 12V alternatorEngine driven raw water pumpEasy access to service items from top of engine (filters, anodes, fuses, water pump)Morse 33C compatible engine speed and shift control connectionsEngine sump oil drain pump

Electrical extension loom - 2.3 metresBasic control panel with warning lights and tachometer and hour meterAnti vibration mounts and adjusting screwsPK6 crankshaft pulley providing a drive for additional pump, alternator etc.Owners handbook3 years warranty on engine and components1 year warranty on all electrical components2 and 3D full CAD installation drawings availableDelivered on standard euro pallet

PTO for rail mounted itemsCrank mounted stub shaft for PTO (32mm)SAE 9T gear driven PTO, at 0.9 engine speedDeluxe control panel, which includes specification of basic panel with additional oil pressure, water temp, gauges and voltmeterSeawater strainerRemote shift control and cablesGearbox ratio optionsFlexible output couplingVarious prop and stern gear componentsCalorifier connectionsGearbox upgrade70 amp alternatorDomestic travel power up to 5kW 230VHydraulic drive system

Dealer Stamp




ISO 9001


Shire 50 Workboat



l 50 hp @ 3000 rpm





l Fully dyno tested





Doc No. 50WB-01, 02/2014



Naturally aspirated, 4 cylinder, 4 cycle inline water-cooled diesel284 kg dry weightFull size replaceable air filter for maximum filtration and noise reductionEngine driven raw water pumpEasy access to service items from top of engine (filters, anodes, fuses, water pump)Flexible fuel lines, comply with ISO 7840Morse 33C compatible engine speed and shift control connections

Engine sump oil drain pumpElectrical extension loom - 2.3 metresAnti vibration mounts and adjusting screwsPK6 crankshaft pulley providing a drive for additional pump, alternator etc.Owners handbook3 years warranty on engine and components1 year warranty on all electrical components2 and 3D full CAD installation drawings availableDelivered on standard euro pallet

PTO for rail mounted itemsCrank mounted stub shaft for PTO (32mm)SAE 9T gear driven PTO, at 0.9 engine speedDeluxe control panel, which includes specification of basic panel with additional oil pressure, water temp, gauges and voltmeterSeawater strainerRemote shift control and cablesGearbox ratio optionsFlexible output couplingVarious prop and stern gear componentsCalorifier connectionsGearbox upgrade70 amp alternatorDomestic travel power up to 5 kW / 230VHydraulic drive system

Dimensions

Dealer Stamp




ISO 9001


Shire 70 Workboat

Specifications l 4 cylinder propulsion engine

l Yanmar 4TNV base engine

l 70 hp @ 2500 rpm



l PRM260 hydraulic gearbox


l Fully dyno tested

l Deluxe panel




Doc No. 70WB-01, 02/2014


Optional Accessories

Naturally aspirated, 4 cylinder, 4 cycle inline water-cooled dieselYanmar 4TNV98-N base engine2:1 ratio400 kg dry weightFuel prefilter with water drainFull size replaceable air filter for maximum filtration and noise reductionEngine driven raw water pumpEasy access to service items from top of engine (filters, anodes, fuses, water pump)Flexible fuel lines, comply with ISO 7840Morse 33C compatible engine speed and shift control connections

Engine and gearbox sump oil drain pumpsElectrical extension loom - 2.3 metresDry exhaust manifold with stainless steel water injected elbowAnti vibration mounts and adjusting screwsBulkhead mounted coolant bottle, hoses and clipsPK6 crankshaft pulley providing a drive for additional pump, alternator etc.Owners handbook2 and 3D full CAD installation drawings availableFull range of accessoriesDelivered on standard euro pallet

PTO for rail mounted itemsCrank mounted stub shaft to customers specSAE 9T gear driven PTO, at 0.9 engine speedSeawater strainerRemote shift control and cablesGearbox ratio optionsFlexible output couplingVarious prop and stern gear componentsCalorifier connectionsGearbox upgrade70 amp alternatorDomestic travel power up to 5kW 230V

Deluxe Control Panel

Dimensions

Dealer Stamp




ISO 9001



l John Deere Base Engine

l 85 hp @ 2500 rpm





l Fully dyno tested

l Deluxe control panel

l 3 Year Warranty on engine


Accessories IncludedRemote coolant header tankFlexible fuel line (2 x 1m)Diesel fuel filter / water separatorEngine oilEngine coolant / anti-freezeStainless steel water injection exhaust elbow

Shire 85 Workboat

Doc No. 85WB-01, 02/2014

Dimensions


Optional Accessories Deluxe Control Panel

Crankshaft centreline to gearbox output shaft

Naturally aspirated, 4 cylinder, 4 cycle inline water-cooled dieselJohn Deere 4045 DF 270 base engine545 kg dry weightFull size replaceable air filter for maximum filtration and noise reductionEasy access raw water pumpEasy access to service items from top of engine (filters, anodes, fuses, water pump)Morse 33C compatible engine speed and shift control connectionsEngine sump oil drain pump

Electrical extension loom - 2.3 metresAnti vibration mounts and adjusting screwsOwners handbook3 years warranty on engine1 year warranty on all electrical components2 and 3D full CAD installation drawings availableFull range of accessoriesDelivered on standard euro palletEngine oil and filter change period 370 hours using original John Deere Plus 50 oil and filterGearbox oil sump pump

Crank mounted stub shaft for PTO (size optional)Remote shift control and cablesGearbox ratio optionsFlexible output couplingVarious prop and stern gear componentsCalorifier connections24 volt electricsPRM 500 gearboxGearbox driven P.T.O (on PRM500)PK6 crankshaft pulley providing a drive for additional pump, alternator etc.Domestic travel power up to 5kW 230VHydraulic Drive System

Dealer Stamp




ISO 9001


Shire 130 Workboat


l John Deere Base Engine

l 130 hp @ 2500 rpm





l Fully dyno tested

l Deluxe control panel

l 3 Year Warranty on engine l 1 Year Warranty on all electrical components

Accessories IncludedRemote coolant header tankFlexible fuel line (2 x 1m)Diesel fuel filter / water separatorEngine oilEngine coolant / anti-freezeStainless steel water injection exhaust elbow

NOTE: Engine fitted with optional PTO stub shaft

Doc No. 130WB-01, 02/2014


Optional Accessories Deluxe Control Panel

Naturally aspirated, 6 cylinder, 4 cycle inline water-cooled dieselJohn Deere 6068 DF 150 base engine645 kg dry weightFull size replaceable air filter for maximum filtration and noise reductionEasy access raw water pumpEasy access to service items from top of engine (filters, anodes, fuses, water pump)Morse 33C compatible engine speed and shift control connectionsEngine sump oil drain pump

Electrical extension loom - 2.3 metresAnti vibration mounts and adjusting screwsOwners handbook3 years warranty on engine1 year warranty on all electrical components2 and 3D full CAD installation drawings availableFull range of accessoriesDelivered on wooden palletEngine oil and filter change period 370 hours using original John Deere Plus 50 oil and filterGearbox oil sump pump

PTO for rail mounted itemsCrank mounted stub shaft for PTO (size optional)Remote shift control and cablesGearbox ratio optionsFlexible output couplingVarious prop and stern gear componentsCalorifier connections24 volt electricsGearbox driven P.T.OPK6 crankshaft pulley providing a drive for additional pump, alternator etc.Upgrade gearboxDomestic travel power up to 5kW 230V

Dimensions

Dealer Stamp




ISO 9001


Documents

WORKBOAT RANGE - Barrus...Engine Range Engine Model 15RB 20RB 30WB 40WB 50WB 70WB 85WB 130WB Cylinders 2 3 3 4 4 4 4 6 Horsepower 15 20 30 40 50 70 85 …