Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
WORKSHOP
Scaling up initiatives supporting the energy renovation of
buildings
16th February 2016
Brussels
Agenda• 8.40am Welcome by Oliver Rapf, Executive Director (BPIE)
• 8.45am A selection of best practice examples of voluntary and mandatory renovation initiatives across Europe, Dan Staniaszek (BPIE)
• 9.00am New skins for old buildings. New technologies and lessons learnt from the EASEE project, Elisabetta Delponte(D’Appolonia)
• 9.15am International scaling of Net Zero Energy retrofits with performance warranties and one week installation times, Ron van Erck (Energiesprong)
• 09.30am Discussions
• 10.00am End
Renovation in Practice -examples of voluntary and mandatory initiatives
Dan StaniaszekBuildings Performance Institute Europe
EASEE Breakfast Seminar
Brussels, 16th February 2016
Mandatory versus Voluntary
MANDATORY
• Use legislative means to “force” building owners to improve energy performance
• Trigger points need to be carefully considered
• Can be perceived as heavy handed
VOLUNTARY
• Relies on overcoming consumer inertia to take action based on attractiveness of the offer
• 30+ years of experience shows achievable renovation rates only ~ 1% p.a.
Six trigger points
for
mandatory renovation
1. Within a Specific Timeframe
• Germany – In place for 10 years, the Energy Saving Ordinance contains obligation to improve energy performance (subject to cost-effectiveness) by 2015
• France – 2015 Energy transition law includes obligation for private residential building owners to renovate their buildings by 2025 where the primary energy consumption exceeds 330 kWh/m2a (= classes F & G).
2. When undertaking maintenance work
• The French energy transition law includes requirements for upgrading the energy performance of external façades and roofs when maintenance or improvement work is planned on the respective building components.
3. When renting a property
• United Kingdom - From April 2018, private residential and non-residential properties in the lowest two classes, F and G, will need to be improved in order to be let out to tenants.
• Flanders Region of Belgium - Since January 2015, residential properties need to meet certain minimum requirements for roof insulation
4. At change of building use
• Denmark - minimum energy requirements for building components in case of change of building use. Examples are:
– conversion of an outbuilding to accommodation
– conversion of usable roof space to accommodation
5. When changing a boiler
• Baden-Württemberg, Germany – options when changing a boiler (chart):
• Bolzano, Italy -renewable energy sources must provide 25% heating and 60% hot water.
• Requirement can also be met through energy efficiency measures
6. When extending a building
Italy - various regions and cities have introduced mandatory building performance upgrades in case of extension:
• Autonomous Province of Bolzano
• Region of Valle D’Aosta
• Trento Province
• Torino city
Mandatory Renovation - Recommendations
• 3% annual renovation requirement for central government buildings (EED article 5) should be extended to ALL public buildings.
• Over time, buildings in the lowest energy performance classes should be deemed unsuitable for occupation. Options include: – Sale or rental of a property could become conditional on meeting
minimum energy performance requirements – All buildings could be set a minimum energy performance threshold
target (varied according to building type) within a given time frame
• Social housing should be in the top quartile energy performance • Any extension, change of use or addition to existing buildings
should be conditional on improving the overall energy performance.
• Change of heating or cooling equipment, or undertaking maintenance work on the building should be accompanied by a requirement to improve building energy performance
Five best practice cases
of
voluntary schemes
1. Stroomversnelling (NL)
• Agreement between social housing sector, construction companies, government and banks.
• Renovation of social housing to net zero energy at no cost to tenants
• Installed within 10 days.
• Energy performance guarantee of 30 years.
2. KredEx (Estonia)
• €72M revolving fund for renovation of apartment blocks
• Combines EU funding (ERDF) and state support, backed by state guarantee
• Loans + Grant linked to renovation level
• >1000 buildings renovated since 2009
• Average saving on energy bills = 40%
3. KfW (Germany)
• Long-standing, large scale support programme for building energy performance improvement
• Annual public budget (all buildings) ~ €1.8 bn/a
• Largest per capita renovation scheme in Europe (€16/person p.a.)
• Support geared towards level of renovation
• “KfW Efficiency House” an established brand
• Very low interest loans (~0.75%)
4. Habiter Mieux (France)
• Large scale national programme targeting fuel poor and low income households
• Aims to renovate 50,000 dwellings p.a.
• Min. 25% energy saving (actual to date > 40%)
• Energy Efficiency Ambassadors used to identify low‐income households
• Supported by energy suppliers as part of their Energy Efficiency Obligation
5. Carbon and Energy Fund (UK)
• Dedicated expert service for UK public sector.
• “Ready to wear” Energy Service PerformanceContracts for complex building renovation.
• Guaranteed savings.
• Streamlining of procedures accelerates thetendering process by up to one year.
What makes a successful scheme?
Stakeholder engagement
Political commitment
Provide support
Make financing easy
Efficient implementation
Operate at scale
Focus on Quality
Communication is key
Incentivise a holistic approach
Adapt to needs of applicants
Dan StaniaszekBuildings Performance Institute
Europe
www.bpie.eu
BPIE datahub:
www.buildingsdata.eu
New skins for old buildingsNew technologies and lessons learnt from the
EASEE project
Brussels, February 16th, 2016
Elisabetta Delponte, [email protected]
Francesca Marchi, [email protected]
Innovative technologies and software
“This project has received funding from the European Union’s Seventh Programme for research, technological development and demonstration under grant agreement No [285540]”.
EASEE: “Envelope Approach to improve Sustainability and Energy efficiency in Existing multi-storey multi-owner residential buildings”(March 2012-February 2016)
Prototyping and Test Validation
Application in reality: Demonstrators
Business Model and Impacts
EASEE developed a new holistic approach to energy efficient envelope retrofittingof multi-storey and multi-owner buildings which preserves the originalaesthetics of the façade through a combination of innovative materials, systemsand software
EASEE innovative solutionsCustomizable lightweight prefabricated panels for external retrofitting
Manufacturing process based on adjustable mouldingformwork
Enhanced panelsbased on perlite hydrophobizedthrough innovative technology
Prefabricated aerogel laminated panels
Vertical cylinder-like reactor for Natural and Synthetic Expanded perlite
Innovative Synthetic Expanded perlite based on recycled material and industrial by-products.
Permeable wallpaper based on impregnation of a textile product with aerogel.
EXTE
RIO
R
ENV
ELO
PE
INTE
RIO
REN
VEL
OP
EC
AV
ITY
W
ALL
EASEE New Holistic Approach
Building Assessment
Retrofitting Planner for retrofitting solutions identification
EASEE solution Decrease in U-value
Perlite boards for inner retrofit 44,26%
Aerogel wallpaper for inner retrofit
24.12%
Aerogel laminated panels for inner retrofit
39.40%
Expanded Hydrophobized perlite for cavity retrofit
89,17%
Prefabricated panels for outer retrofit
65%
Prototyping&
Testing
Milan (Italy)
Gdansk (Poland)
Madrid (Spain)
Cinisello Balsamo (Italy)
Lavrion (Greece)
Real Scale Demonstrators
Age of construction: 1950Owner: Municipality(Building under protection of Cultural Heritage Conservator (CHC))U value before retrofitting: 1 W/m2K
Location: GdanskAge of construction: 1950Owner: Municipality (Building under protection of Cultural Heritage Conservator)U value before retrofitting: 1 W/m2K
Installation of 40 EASEE panels (50cm x150cm x12,4cm)U value after retrofitting: 0,33 W/m2K
Age of construction: 1950Owner: Municipality(Building under protection of Cultural Heritage Conservator (CHC))U value before retrofitting: 1 W/m2K
Location: MadridAge of construction: 60sOwner: Private - mid-age Spanish familyU value before retrofitting: 1,88 W/m2K
Installation of 12 EASEE panels and cavity retrofitting through innovative perliteU value after retrofitting: 0,37 W/m2K
Location: Milan, Age of construction: 1971Owner: Local Social Housing Agency (ALER) U value before retrofitting: 0,8012 W/m2K
Installation of 186 EASEE panels U value after retrofitting: 0,2377 W/m2K
How to address retrofitting market?
Proposing value to clients: Improve thermal performance and
visual appeal Installed easily and quickly Less disruption to inhabitants and
neighbours. High durability & weather resistance
Identifying customer segments:
PRIMARY - multi-family social housing,
multi-owner residential buildings
SECONDARY – Public buildings, offices,
hotels, industrial buildings
Country insulated wall area p.a.km2 M€/a
EU total 8.9 890Spain 2.0 200
Germany 1.5 152France 1.1 107
Italy 1.0 95Poland 0.5 52Sweden 0.3 34United
Kingdom 0.3 33Switzerland 0.3 29
Netherlands 0.2 20Romania 0.2 20
ASSUMPTIONS: ~20% of wall area in MFH over next 10 years (source – SUSREF*)EASEE product captures 10% of market; Price (at full production volume)~€100/m2
*Sustainable refurbishment of building facades and exterior walls
Social impactsJob creation:- Building assessment (BIM Models, thermal data, structural data, etc)- Building monitoring and diagnostic
Regeneration of urban area:- Area of Cinisello Balsamo completely redeveloped- Gdansk area modernized
Advantages in social security:- Safety in installation without scaffolding- Minimization of burden and annoyances for occupants
Environmental impactsReduction in energy consumptions:- In Italy, 6.47% reduction in energy use across the year or 15.4236 kWh/m2 per annum-In Spain, 35% reduction in primary energy for heating-In Poland, 6.47% reduction in energy use across the year or 15.4236 kWh/m2 per annum
Comfort and indoor climate, demonstrated not only in winter season but also during summer
Reducing CO2 of about 10% for the three demo buildings
Economic impacts
Property value increased due to the aesthetic and energy improvements
Improved productivity for companies involved in new diversified businesses
Economic savings over the course of 60 years LCA:
-In Poland: 24,650 kWh per annum -> € 2,341.75 saved per annum (Payback period: 7,3 years)
-In Spain: 4,460 kWh per annum -> € 423.7 saved per annum (Payback period: 7,7 years)
-In Italy: 71,532 kWh per annum -> € 6,795.54 saved per annum (Payback period: 7,8 years)
Thank you for your attention!
For more information:Please visit our website: http://www.easee-project.eu/