Worm Drive Hose Clamps - Tidyco Ltd. · 2017. 4. 10. · HC140-160 140 160 7 2.25 2.15 Screwdriver 5555 HC1 12.60 Cut & Fix Banding, Mild Steel & 304 Stainless Steel Mild Steel, 8mm

1268

Tools, Hardware& PPE

Air Tools

Wash Down & Fuelling

Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips

Hose, Tubing & Couplings

MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves

Pneumatic & Vacuum Equipment

KELM™Pneumatics

Ind. Air Prep., Monitor & Test

PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Worm Drive Hose Clamps

Wall Dispenser & Hose ClampsCode Description QTYHC-YDS Wall Dispenser Only (for Hose Clamps) 1HC8-12 8-12mm Hose Clamps 12HC10-16 10-16mm Hose Clamps 12HC12-20 12-20mm Hose Clamps 12HC16-25 16-25mm Hose Clamps 12HC20-32 20-32mm Hose Clamps 12HC25-40 25-40mm Hose Clamps 12HC32-50 32-50mm Hose Clamps 12HC35-45 35-45mm Hose Clamps 12HC40-60 40-60mm Hose Clamps 12HC50-70 50-70mm Hose Clamps 12HC60-80 60-80mm Hose Clamps 9HC70-90 70-90mm Hose Clamps 9HC1 Flexible Worm Drive Screwdriver 1

5555

HC-DS 135.65

All Stainless Steel Worm Drive Hose Clamps• 304 stainless steel.

Hose Clamps

9mm Band Width

5555

1-99

100+

HC8-12 8 12 OOO 0.70 0.65HC10-16 10 16 MOO 0.70 0.65HC12-20 12 20 OO 0.70 0.65HC16-25 16 25 OX 0.70 0.65HC20-32 20 32 1A 0.75 0.70HC25-40 25 40 1 0.75 0.70HC32-50 32 50 2A 0.75 0.70HC35-45 35 45 - 0.75 0.70HC40-60 40 60 2 0.80 0.75

Material: Band and Housing: AISI 430 stainless steel. Screw: V6 free plated carbon steel.Dimensions: 9mm Band Width 12mm Band WidthBand Width (W): 9mm 12mmBand Thickness (T): 0.6mm 0.7mmHousing Width (B): 12mm 15mmHousing Height (H): 11mm 11mmWidth across fl ats (SW): 7mm 7mm

HOUSING

BAND

T

H

W

B

SW

BANDBEADEDON BOTHEDGES

12mm Band Width

5555

1-99

100+

HC50-70 50 70 3 0.85 0.80HC60-80 60 80 3X 1.60 1.55HC70-90 70 90 4 1.60 1.50HC80-100 80 100 4X 1.70 1.60HC90-110 90 110 - 1.70 1.60HC100-120 100 120 5 1.70 1.60HC110-130 110 130 - 1.80 1.70HC120-140 120 140 6 and 6X 1.85 1.75HC130-150 130 150 - 1.60 1.50HC140-160 140 160 7 2.25 2.15

Screwdriver

5555

HC1 12.60

Cut & Fix Banding, Mild Steel & 304 Stainless Steel

Mild Steel, 8mm Band Width

5555

2025-0494 3m + 8 Fixings 29.252025-0544 25m + 50 Fixings 369.55

Mild Steel, 14mm Band Width

5555


304 Stainless Steel, 8mm Band Width

5555


304 Stainless Steel, 14mm Band Width

5555


All Stainless Steel Worm Drive Hose Clamps

5555

HCS12 9 8 12 0.85HCS16 9 10 16 0.90HCS20 9 12 20 0.90HCS25 9 16 25 1.40HCS32 9 20 32 1.40HCS40 9 25 40 1.40HCS50 9 32 50 1.50HCS60 9 40 60 1.50HCS70 9 50 70 1.55

13 Clamps & Clips-1.indd 1268 17/02/2015 08:56

1269

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Pipe Clamps & Brackets

Spiral Clamps

Right-hand (clockwise) Wound

5555

SCR-112 1.1/2” 6.95SCR-2 2” 8.15SCR-212 2.1/2” 9.25SCR-3 3” 10.10SCR-4 4” 11.30SCR-5 5” 14.65SCR-6 6” 15.55SCR-10 10” 23.95SCR-12 12” 28.70

Left-hand (counter clockwise) Wound

5555

SCL-2 2” 7.65SCL-212 2.1/2” 8.95SCL-3 3” 9.60SCL-4 4” 11.30SCL-5 5” 14.65SCL-8 8” 18.80

Copper Saddle Clips

Metric

5559

1-9

10+

2024-0370 22 0.55 0.502024-0388 28 0.70 0.60

Mild Steel Saddle Clips• Bag of 100 • Mild Steel Zinc Plated• Sizes up to 10mm have

4.8mm fi xing hole• Sizes 12mm & 16mm have

5.8mm fi xing hole

Half Saddles - Light, Bag of 100

5559

A940040-1 4 1 35.40A940050-1 5 1 35.45A940060-1 6 1 38.70A940070-1 7 1 39.15A940080-1 8 1 43.05A940100-1 10 1 44.70A940120-1 12 1 50.75A940160-1 16 1 56.20

• Bag of 100 • Mild Steel Zinc Plated• Sizes up to 10mm have

4.8mm fi xing hole• Sizes 12mm has 5.8mm

fi xing hole

Full Saddles - Light, Bag of 100

5559

C940040-1 4 1 38.70C940050-1 5 1 43.05C940060-1 6 1 47.55C940070-1 7 1 49.60C940080-1 8 1 52.30C940100-1 10 1 55.15C940120-1 12 1 60.70

• Mild Steel Zinc Plated• Sizes up to 19mm have

6.6mm fi xing hole• Sizes 23mm to 33mm

have 9.0mm fi xing hole

Half Saddles - Heavy

5559

H940070-1 7 1 50 28.20H940090-1 9 1 50 34.40H940130-1 13 1 50 41.40H940155-1 15.5 1 50 45.80H940190-1 19 1 50 50.15H940230-1 23 1 25 98.65H940260-1 26 1 25 53.70H940285-1 28.5 1 25 57.05H940310-1 31 1 25 125.15H940330-1 33 1 25 147.20

Customers who bought from this page also purchased KELM™ Metric Tubing – see page 574


1270


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Pipe Clamps

Heavy Duty Steel Hose Clamps

Zinc Yellow Plated

5555

HDSHS-1719 17 19 1.55HDSHS-2022 20 22 1.55HDSHS-2325 23 25 1.60HDSHS-2628 26 28 1.60HDSHS-2931 29 31 1.70HDSHS-3235 32 35 1.80HDSHS-3639 36 39 1.80HDSHS-4043 40 43 1.80HDSHS-4447 44 47 2.35HDSHS-4851 48 51 2.45HDSHS-5255 52 55 2.45HDSHS-5659 56 59 2.45HDSHS-6063 60 63 2.50HDSHS-6467 64 67 2.50HDSHS-6873 68 73 3.15HDSHS-7479 74 79 3.35HDSHS-8085 80 85 3.45HDSHS-8691 86 91 3.45HDSHS-9297 92 97 3.45HDSHS-98103 98 103 3.45HDSHS-104112 104 112 3.45HDSHS-113121 113 121 3.45HDSHS-122130 122 130 3.75HDSHS-131139 131 139 4.35HDSHS-140148 140 148 4.35HDSHS-149161 149 161 4.50HDSHS-162174 162 174 4.50HDSHS-175187 175 187 4.55HDSHS-188200 188 200 4.55HDSHS-201213 201 213 4.75HDSHS-214226 214 226 4.75HDSHS-227239 227 239 5.15HDSHS-240252 240 252 5.15

Stainless Steel Superior Clamps

Grade 304 Stainless Steel Band, Housing & Screw

5555

SHC17-19 17 19 3.75SHC20-22 20 22 3.75SHC23-25 23 25 3.75SHC26-28 26 28 3.75SHC29-31 29 31 4.45SHC32-35 32 35 4.45SHC36-39 36 39 4.65SHC40-43 40 43 4.65SHC44-47 44 47 7.15SHC48-51 48 51 7.15SHC52-55 52 55 7.90SHC56-59 56 59 7.90SHC60-63 60 63 8.35SHC64-67 64 67 8.35SHC68-73 68 73 9.40SHC74-79 74 79 9.40SHC80-85 80 85 9.60SHC86-91 86 91 9.60SHC92-97 92 97 9.85SHC98-103 98 103 9.85SHC104-112 104 112 10.20SHC113-121 113 121 10.20SHC122-130 122 130 10.40SHC131-139 131 139 13.55SHC140-148 140 148 14.00SHC149-161 149 161 14.00SHC162-174 162 174 14.80SHC175-187 175 187 14.80SHC188-200 188 200 15.20SHC201-213 201 213 15.20SHC214-226 214 226 15.85SHC227-239 227 239 15.85SHC240-252 240 252 15.85

Malleable Iron Plain Clamps

Zinc Yellow Plated

5555

MIPC-1722 17 22 2.20MIPC-2229 22 29 2.45MIPC-2934 29 34 2.45MIPC-3440 34 40 3.15MIPC-3949 39 49 4.20MIPC-4860 48 60 4.45MIPC-6076 60 76 5.15MIPC-7794 77 94 8.70MIPC-400 88 96 8.60MIPC-94115 94 115 9.85MIPC-463 102 108 9.10MIPC-525 108 125 13.45MIPC-550 114 128 13.90MIPC-600 130 144 16.85MIPC-675 151 165 17.20MIPC-769 165 192 22.35MIPC-875 210 225 30.50MIPC-988 227 239 49.15MIPC-1125 252 289 59.40MIPC-1450 335 381 141.55

For Industrial Polypropylene Compression Fittingssee page 1227


1271

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Pipe Clamps

Pipe Clamps

Unlined, M8/M10

5555

APPC20 20-25 1.50APPC31 31-38 1.60APPC40 40-46 1.70APPC52 52-56 1.90APPC57 57-62 1.95APPC63 63-66 2.05APPC67 67-71 2.05APPC72 72-75 2.10APPC76 76-81 2.25APPC89 89-94 2.35APPC95 95-102 2.70APPC108 108-117 3.25APPC176 176-182 4.40

Rapid EPDM Rubber Lined, M8/M10

5555

APRC13 13-15 1.80APRC20 20-22 2.00APRC25 25-28 2.00APRC52 52-55 2.65

EPDM Rubber Lined, M8/M10

5555

APIPC14 14-20 1.75APIPC20 20-25 1.85APIPC26 26-32 2.00APIPC32 32-39 2.10APIPC40 40-47 2.40APIPC48 48-53 2.55APIPC54 54-58 2.75APIPC58 58-64 3.00APIPC68 68-72 3.35APIPC72 72-80 3.55APIPC82 82-86 3.65APIPC88 88-92 5.75APIPC108 108-112 4.95APIPC112 112-118 5.80APIPC137 137-142 6.05APIPC159 159-162 6.70APIPC164 164-168 6.80

Swivel Hanger

5555

APSHM10 M10 1.50APSWM12 M12 1.50

Constant Tension Clamps

304 Stainless Steel, 15.8mm Band Width

5555

CTC25-45 25 45 7.45CTC32-54 32 45 7.45CTC45-67 45 67 7.55CTC57-79 57 79 7.75CTC70-92 70 92 7.90CTC83-105 83 105 8.25CTC95-117 95 117 8.40CTC108-130 108 130 8.55CTC121-143 121 143 8.70CTC133-155 133 155 9.05CTC146-168 146 168 9.25CTC159-181 159 181 9.50CTC172-193 172 193 9.80CTC184-206 184 206 11.30CTC197-219 197 219 11.80CTC210-232 210 232 12.50

Easy Grip Hose Clamp

Steel, 9mm Band Width

5555

EGHC8-12 8 12 0.65EGHC10-16 10 16 0.65EGHC12-20 12 20 0.65EGHC16-25 16 25 0.70EGHC20-32 20 32 0.70EGHC25-40 25 40 0.75EGHC32-50 32 50 0.80EGHC35-45 35 45 0.80EGHC40-60 40 60 0.85EGHC50-70 50 70 0.90EGHC60-80 60 80 1.00EGHC70-90 70 90 1.10EGHC80-100 80 100 1.20

Single Ear Hose Clamp

Stainless Steel, 5mm Band Width

5555

SEHC6.5 5 6.5 0.45SEHC7 5.8 7 0.45SEHC8 6.8 8 0.45SEHC8.7 7 8.7 0.45SEHC9.5 7.8 9.5 0.50SEHC10.5 8.8 10.5 0.50

Stainless Steel, 7mm Band Width

5555

SEHC11.3 9.6 11.3 0.50SEHC11.9 10.2 11.9 0.50SEHC12.3 10.6 12.3 0.55SEHC13.3 10.8 13.3 0.55SEHC14 11.5 14 0.60SEHC14.5 12 14.5 0.60SEHC15.3 12.8 15.3 0.60SEHC16.2 13.7 16.2 0.65SEHC17.5 15 17.5 0.65SEHC18.5 15.3 18.5 0.65SEHC19.2 16 19.2 0.65SEHC22.6 19.4 22.6 0.75SEHC23.5 20.4 23.6 0.75SEHC24.1 20.9 24.1 0.75SEHC27.1 23.9 27.1 0.90SEHC32.1 28.9 32.1 1.10SEHC34.6 31.4 34.6 1.10SEHC41 37.8 41 1.20SEHC42.5 39.3 42.5 1.20SEHC44 40.8 44 1.20SEHC51.5 48.3 51.5 1.30SEHC63.5 60.3 63.5 1.55


1272


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

O Clips & Ferrules

O Clips

Mild Steel

5559

NO5-7 1/4” 5 7 0.30NO7-9 5/16” 7 9 0.30NO9-11 7/16” 9 11 0.30NO11-13 1/2” 11 13 0.35NO13-15 9/16” 13 15 0.35NO15-18 5/8” 15 18 0.50NO17-20 3/4” 17 20 0.50NO20-23 7/8” 20 23 0.65NO22-25 15/16” 22 25 0.75NO23-27 1” 23 27 0.75NO25-28 1.1/16” 25 28 0.80NO28-31 1.3/16” 28 31 0.85NO31-34 1.5/16” 31 34 1.00NO34-37 1.7/16” 34 37 1.20

O Clip Pliers

5555

OP1 12.35

Snap Clip, Acetal

1050

1-99

100+

PC8-10 8 10 1.10 1.05PC10-12 10 12 1.20 1.15PC11-13 11 13 1.00 0.95PC13-15 13 15 1.35 1.30PC14-16 14 16 1.35 1.30PC15-17 15 17 1.20 1.15PC16-18 16 18 1.35 1.30PC17-19 17 19 1.20 1.15PC18-20 18 20 1.20 1.15PC21-23 21 23 1.45 1.40PC23-25 23 25 1.45 1.40PC26-28 26 28 1.60 1.50PC30-32 30 32 1.45 1.40PC44-46 44 46 1.60 1.55

Brass Hose Ferrules

Type HF

5555

HF7322 12.7 25.4 8.7 0.85HF3588 14.3 19 9.4 1.30HF7325 14.4 25.4 10.9 0.85HF7326 15.1 25.4 11 0.85HF7327 15.9 25.4 11.1 0.85HF7328 16.7 25.4 11.1 0.85HF7329 17.4 25.4 12.7 0.85HF7330 18.2 25.4 12.7 0.85HF7331 19.1 25.4 12.7 1.50HF7332 19.8 25.4 12.7 1.60HF7333 20.6 25.4 15.8 1.30HF7244 22.2 22.5 17.6 1.55HF1275 31.9 31.9 22.2 4.70

Nylorack Tube Clips

Imperial/Metric

5559

N6/1 3/16” (4mm) 1 1.20N8/1 1/4” (6mm) 1 1.75N10/1 5/16” (8mm) 1 1.75N12/1 3/8” (10mm) 1 2.00N16/1 1/2” (12mm) 1 2.00N6/2 3/16” (4mm) 2 1.90N8/2 1/4” (6mm) 2 2.00N10/2 5/16” (8mm) 2 2.00N12/2 3/8” (10mm) 2 2.00N16/2 1/2” (12mm) 2 2.00N6/3 3/16” (4mm) 3 2.00N8/3 1/4” (6mm) 3 2.20N10/3 5/16” (8mm) 3 2.40N12/3 3/8” (10mm) 3 2.40N6/4 3/16” (4mm) 4 2.40N8/4 1/4” (6mm) 4 2.40N6/5 3/16” (4mm) 5 2.40N12/5 3/8” (10mm) 5 6.60N8/10 1/4” (6mm) 10 6.60

Single Ear O Clips

Mild Steel

5559

2019-1086 8 11 0.302019-1094 9 12 0.30

Mild Steel Hose Ferrules

5559

SHF-10 10.1 20 7.5 1.00SHF-11 11.1 20 8.5 2.40SHF-12 12.1 20 8.5 0.70SHF-13 13.1 20 8.8 0.80SHF-14 14.1 20 11 0.80SHF-15 15.1 20 12.5 1.00SHF-16 16.1 20 12.5 0.95SHF-17 17.1 20 14.5 1.00SHF-18 18.1 20 14.5 2.30SHF-19 19.1 21 14.8 1.60SHF-20 20.1 22 14.8 1.60SHF-33 33.1 34 26.5 2.65SHF-36 36.1 34 29.5 4.25

Stainless Steel Hose Ferrules

Grade 303

5559

STF-11 11.1 20 8.5 2.40STF-12 12.1 20 8.5 2.40STF-13 13.1 20 8.8 2.40STF-14 14.1 20 11 2.40STF-15 15.1 20 12.5 2.40STF-17 17.1 20 14.5 2.40STF-18 18.1 20 14.5 2.90STF-22 22.1 22 15.5 3.60

Tech Sheet 588

A

D2=I.D.

D=I.D.

A

D2=I.D.

D=I.D.

A

D2=I.D.

D=I.D.


1273

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Hose Crimpers & Die Sets

Hose Crimpers & Die SetsCrimps 1/4” to 3/8” ID hose in either 1 or 2 wireCrimper has fi xing holes for permanent installations or it can be used as a portable unit for hose assembly in the fi eld.This small crimper comes complete with a standard set of dies.

Approx. Die I.D:1 – 0.630” (16mm),2 – 0.580” (14.7mm),3 – 0.530” (13.5mm),4 – 0.480” (12.2mm),5 – 0.680” (17.3mm)

This unit is only for crimping tin or brass ferrules.It will only crimp down the above sizes in one swage.

Small Bore Hose Crimper & Dies

5555

CV500 227.95

Spare Dies to suit Small Bore Crimper

5555

HC50-12 5/8” 10.75HC50-23 37/64” 8.70HC50-34 17/32” 8.70HC50-45 31/64” 8.70HC50-56 11/16” 11.90HC50-7 7/16” 21.40HC50-8 3/4” 21.40HC50-9 13/16” 21.40HC50-10 3/8” 21.40

Crimps 7/8” to 1.1/2” OD hose (1/2” to 1” ID).This crimper is sold without dies. Please select the correct die set from the table below.

Large Bore Hose Crimper

5555

CV501 138.80

Spare Dies to suit Large Bore Crimper

5555

HC51-22 11/16” 22.00HC51-23 23/32” 22.00HC51-24 3/4” 22.00HC51-25 25/32” 22.00HC51-26 13/16” 22.00HC51-27 27/32” 22.00HC51-28 7/8” 22.00HC51-29 29/32” 22.00HC51-30 15/16” 22.00HC51-31 31/32” 22.00HC51-32 1” 22.00HC51-33 1.1/32” 22.00HC51-34 1.1/16” 22.00HC51-36 1.1/8” 22.00HC51-38 1.3/16” 22.00HC51-40 1.1/4” 22.00HC51-42 1.5/16” 22.00HC51-44 1.3/8” 22.00HC51-46 1.7/16” 22.00HC51-48 1.1/2” 22.00

For Hose Crimper see page 1150

For Rubber-Tech Hose & Assemblies see page 1140

Tech Sheet 10648


1274


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Metric Pipe Clips & Back Plates

Pipe ClipsDie Cast.

Screw to Wall, Chrome Plated, Brass

0245

EPS-SO15CP-S 15 1.50EPS-SO22CP-S 22 2.00EPS-SO28CP-S 28 2.50EPS-SO35CP-S 35 3.80EPS-SO42CP-S 42 5.70EPS-SO54CP-S 54 6.20

Pressed Screw-On, Brass

0245

EPS-SOPB12-S 12 1.20EPS-SOPB15-S 15 0.90EPS-SOPB22-S 22 1.25EPS-SOPB28-S 28 1.70EPS-SOPB35-S 35 2.00EPS-SOPB42-S 42 3.40EPS-SOPB54-S 54 5.05

Pressed Screw-On, Chrome Plated

0245

EPS-SOPB15CP-S 15 1.35EPS-SOPB22CP-S 22 1.70EPS-SOPB28CP-S 28 1.95EPS-SOPB35CP-S 35 3.00EPS-SOPB42CP-S 42 4.00EPS-SOPB54CP-S 54 6.20

M10 Threads.

Hospital, Brass

0245

EPS-HB15-S 15 2.80EPS-HB22-S 22 3.65EPS-HB28-S 28 4.40EPS-HB35-S 35 7.00EPS-HB42-S 42 6.65EPS-HB54-S 54 8.80

Hospital, Chrome Plated

0245

EPS-HB15CP-S 15 3.30EPS-HB22CP-S 22 4.15EPS-HB28CP-S 28 5.25EPS-HB35CP-S 35 8.00EPS-HB42CP-S 42 5.25EPS-HB54CP-S 54 8.60

Die Cast M10 Threads.


Single Munsen Ring, Brass

0245

EPS-MR15-S 15 1.30EPS-MR22-S 22 1.60EPS-MR28-S 28 1.95EPS-MR35-S 35 2.20EPS-MR42-S 42 3.05EPS-MR54-S 54 5.25EPS-MR67-S 67 6.65EPS-MR76-S 76 8.50

Single Munsen Ring, Chrome Plated

0245

EPS-MR15CP-S 15 1.50EPS-MR22CP-S 22 1.80EPS-MR28CP-S 28 1.80EPS-MR35CP-S 35 2.40EPS-MR42CP-S 42 3.50EPS-MR54CP-S 54 5.70

Double Munsen Ring, Brass

0245

EPS-MR15D-S 15 1.80EPS-MR22D-S 22 1.70EPS-MR28D-S 28 2.20EPS-MR35D-S 35 2.70EPS-MR42D-S 42 4.10EPS-MR54D-S 54 6.30

Back Plates

M10, Male

0245

EPS-MP10-S Brass 1.35EPS-MP10CP-S Chrome Plated 1.60

M10, Female

0245

EPS-FP10-S Brass 0.90EPS-FP10CP-S Chrome Plated 1.00

M10 Threads.

Screw to Wall, Brass

0245

EPS-SO15-S 15 1.20EPS-SO22-S 22 1.85EPS-SO28-S 28 2.15EPS-SO35-S 35 3.00EPS-SO42-S 42 4.95EPS-SO54-S 54 6.95

Die Cast.



1275

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

BSP Pipe Clips & Back Plates

Pipe Clips

1/4” BSPP, Dual Purpose, Brass

0245

EPS-DPBSP15-S 15 2.15EPS-DPBSP22-S 22 3.30EPS-DPBSP28-S 28 3.50EPS-DPBSP35-S 35 4.40EPS-DPBSP42-S 42 4.65EPS-DPBSP54-S 54 6.60

1/4” BSPP, Dual Purpose, Chrome Plated

0245

EPS-DPBSP15CP-S 15 2.50EPS-DPBSP22CP-S 22 3.60EPS-DPBSP28CP-S 28 3.75EPS-DPBSP35CP-S 35 4.30EPS-DPBSP42CP-S 42 4.25EPS-DPBSP54CP-S 54 5.45

Single Munsen Ring, Brass, BSPP

0245

EPS-MRBSP15-S 15 1/4” 1.70EPS-MRBSP22-S 22 1/4” 1.80EPS-MRBSP28-S 28 1/4” 2.20EPS-MRBSP35-S 35 1/4” 4.00EPS-MRBSP42-S 42 1/4” 3.90EPS-MRBSP54-S 54 3/8” 6.10EPS-MRBSP67-S 67 3/8” 3.50EPS-MRBSP76-S 76 1/2” 4.50

1/4” BSPP, Single Munsen Ring, Chrome Plated

0245

EPS-MRBSP28CP-S 28 2.70EPS-MRBSP35CP-S 35 3.40

Double Munsen Ring, Brass, BSPP

0245

EPS-MRBSP15D-S 15 1/4” 2.05EPS-MRBSP22D-S 22 1/4” 2.25EPS-MRBSP35D-S 35 1/4” 4.80EPS-MRBSP54D-S 54 3/4” 4.75

Copper Saddle Clips

0245

EPS-CS10-S 10 - 0.25EPS-CS15-S 15 - 0.25EPS-CS215-S 15 2 Piece 0.45EPS-CS22-S 22 - 0.45EPS-CS28-S 28 - 0.35EPS-CS35-S 35 - 0.55EPS-CS42-S 42 - 1.10EPS-CS54-S 54 - 1.55

Chrome Plated Saddle Clips

1 Piece

0245

CS15CP-S 15 0.35CS22CP-S 22 0.40

2 Piece

0245

CS215CP-S 15 0.75

Steel Saddle Clips

0245

SSB12-S 1/2” 0.90SSB34-S 3/4” 0.10SSB1-S 1” 0.15SSB114-S 1.1/4” 0.20SSB112-S 1.1/2” 0.25SSB2-S 2” 0.40

Back Plates

BSPP Male, Brass

0245

EPS-MPBSP14-S 1/4” 4.40EPS-MPBSP38-S 3/8” 3.10

BSPP Female, Brass

0245

EPS-FPBSP14-S 1/4” 2.10EPS-FPBSP38-S 3/8” 2.60


1276


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Pipe Fixings

Pipe Clips

Snap-in Open, Single, Pack of 100

5559

OPS-15 15 7.70OPS-22 22 10.80OPS-28 28 14.65

Clip Over, Single, Pack of 100

5559

PCC-15 15 9.95PCC-22 22 42.10PCC-28 28 26.25

Nail Clips

Universal, White, Pack of 100

5559

NCW-10 10 Ø2.5 x 32 9.00NCW-15 15 Ø2.5 x 45 15.40NCW-22 22 Ø2.5 x 50 14.65NCW-28 28 Ø2.5 x 55 23.15

Universal, Grey, Pack of 100

5559

NCG-15 15 Ø2.5 x 45 63.70NCG-22 22 Ø2.5 x 50 20.30

The Full PerformanceCompressed Air Pipe System

For AIRpipe Ringmain System see pages 770-783


1277

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Hose Clamps

Mikalor Super & Supra ClampsThe reference heavy duty hose clamp for agricultural, irrigation mining & industrial hose applications. The Mikalor Super clamp was the fi rst of its kind on the market and is still going strong.

Materials:Band: Mild steel yellow zinc plate chromate & passivated.T-Bolt: 8.8 steel yellow zinc plate chromate & passivated.

Tech Sheet 1739

Super W1 Mild Steel with Steel Screw

5556

SBC1719 17 19 1.65SBC2022 20 22 1.65SBC2325 23 25 1.65SBC2628 26 28 1.65SBC2931 29 31 2.00SBC3235 32 35 2.20SBC3639 36 39 2.30SBC4043 40 43 2.30SBC4447 44 47 3.20SBC4851 48 51 3.30SBC5255 52 55 3.40SBC5659 56 59 3.50SBC6063 60 63 3.65SBC6467 64 67 3.75SBC6873 68 73 4.65SBC7479 74 79 4.85SBC8085 80 85 4.95SBC8691 86 91 5.05SBC9297 92 97 5.25SBC98103 98 103 5.35SBC104112 104 112 5.70SBC113121 113 121 6.00SBC122130 122 130 6.90SBC131139 131 139 8.75SBC140148 140 148 8.85SBC149161 149 161 9.80SBC162174 162 174 11.05SBC175187 175 187 11.20SBC188200 188 200 11.65SBC201213 201 213 11.20SBC214226 214 226 12.40SBC227239 227 239 12.90SBC240252 240 252 13.50

The world’s favourite heavy duty clamp. The revolutionary patented design of the Supra clamp makes it the strongest on the market and the unique swivelling bridge means that Supra can be mounted in the most diffi cult applications. Where reliability, strength, high torque and superlative hydraulic performance are needed, industry professionals ask for Supra by name. Available in W2 and in W4 material qualities.

Supra W2 Materials:Band: AISI 430 Stainless steelBolt: Steel Cr3 white zinc plated (Chrome 6 free) Tech Sheet

1740

• Mikalor Clamps: The Mikalor brand has been synonymous with the highest quality heavy duty clamps since the origins of the group. Precision engineered in Spain to DIN 3017, Mikalor clamps are manufactured under the following quality systems: ISO 9001, ISO 14001 & ISO TS 16949.

Supra W2 430 Stainless Steel with Steel Screw

5556

MS1901 17 19 2.95MS1902 19 21 2.95MS1903 21 23 2.95MS1904 23 25 2.95MS1905 25 27 3.05MS1906 27 29 3.05MS1907 29 31 3.50MS1908 31 34 3.65MS1909 34 37 3.85MS1910 37 40 3.85MS1911 40 43 3.95MS1912 43 47 4.95MS1913 47 51 5.15MS1914 51 55 5.25MS1915 55 59 5.45MS1916 59 63 5.45MS1917 63 68 5.55MS1918 68 73 7.50MS1919 73 79 7.70MS1920 79 85 7.90MS1921 85 91 8.15MS1922 91 97 8.35MS1923 97 104 8.45MS1924 104 112 9.00MS1925 112 121 9.20MS1926 121 130 9.40MS1927 130 140 13.30MS1928 140 150 13.60MS1929 150 162 13.70MS1930 162 174 14.25MS1931 174 187 14.60MS1932 187 200 14.95MS1933 200 213 15.35MS1934 213 226 15.70MS1935 226 239 16.05MS1936 239 252 16.50MS1937 252 265 19.05MS1938 265 278 20.20MS1939 278 291 21.35MS1940 291 304 22.65MS1941 304 317 24.05MS1942 317 330 25.60MS1943 330 343 27.25MS1944 343 356 29.20MS1945 356 369 31.20MS1946 369 382 33.40MS1947 382 395 35.75MS1948 395 408 38.25

For Clip Dispensers see page 1285

The colour of the product may vary from that illustrated, due to the

Suppliers manufacturing process.


1278


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Hose Clamps

Mikalor Super & Supra ClampsXLPE-34 The world’s favourite heavy duty clamp. The revolutionary patented design of the Supra clamp makes it the strongest on the market and the unique swivelling bridge means that Supra can be mounted in the most diffi cult applications. Where reliability, strength, high torque and superlative hydraulic performance are needed, industry professionals ask for Supra by name. Available in W2 and in W4 material qualities.Supra W4 Materials:Band: AISI 304 Stainless steelBolt: AISI 302 Cu Stainless steel

Tech Sheet 1741

Technically Advanced: The addition of a system spring washer enables the new SUPRA CT to be applied, with no performance loss, under extreme variations of temperature & pressure.Corrosion Resistant: The quality steels & high resistance surface treatments used in the manufacture of the SUPRA CT comply with all existing worldwide specifi cations regarding corrosion resistance.Ecological: SUPRA CT clamps are totally free of Chrome 6 and are manufactured in accordance with EU directive 2002/95/EC 1.7.06.Design: The design of the SUPRA CT makes it impossible to lose the nut & trunnion. The swivelling bridge makes SUPRA CT easy to fi t & remove. The high resistance bolt, especially designed for strength, permits high torque values.Safety: The bevelled edge of the band prevents damage to the hose.• Washer & external trunnion

304 stainless steel. Chrome 6 free.

Other sizes available on request

SUPRA CTThe hose clamp that adapts itself to variations of pressure and temperature.

Tech Sheet 1742

Supra CT, 430 Stainless Steel with Steel Screw

5556

CT0302014-2 25 27 10.45CT0302021-4 43 47 17.55CT0302022-2 47 51 17.85CT0302023-0 51 55 18.20CT0302025-7 59 63 18.40CT0302026-5 63 68 18.60CT0302027-3 68 73 34.65CT0302028-1 73 79 34.65CT0302029-0 79 85 34.90CT0302030-2 85 91 35.30CT0302031-0 91 97 35.60CT0302033-7 104 112 40.20CT0302034-5 112 121 40.50CT0302036-1 130 140 63.15CT0302042-5 200 213 65.25CT0302043-3 213 226 65.75CT0302044-1 226 239 66.30

Mikalor W3 S-Band Constant Tension Worm Drive ClipsThe main difference between the W3 constant tension worm-drive & the standard Mikalor worm-drive is to be found in the inner-ring insert incorporating a spring. This spring-loaded insert maintains constant pressure around the hose in case of sudden variations in temperature &/or vibration thereby avoiding leaks.Screw: AISI 430 stainless steel.The fact that this clamp guarantees leak-proof hose assemblies with both gaseous fl uid & liquids makes it ideal for applications in car, tractor or heavy machinery engines. Moreover, the non-perforated cold formed band together with the rounded band edges make sure that no damage occurs to the hose. This clip complies fully with the DIN 3017 norm & also with the RoHs directive EU/2002/95/EC dated 1st July 2006.Band and Housing: X6Cr-17 Stainless steel (DIN 1.4016) AISI 430The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling. Spring-loaded insert: AISI 301 Stainless steel*The bandwidth does not take into account the spring-loaded insert.The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling.Worldwide patent.

DIN 3017 Heavy Series

5556

03017834 30 45 9.0003017842 32 50 9.3003017850 40 60 9.9003017869 50 70 5.4503017877 60 80 5.8003017885 70 90 6.2003017893 80 100 14.3503017906 90 110 7.0503017914 100 120 15.6003017922 110 130 8.15

Supra W4 304Stainless Steel with Stainless Screw

5556

SS1301 17 19 7.10SS1302 19 21 7.20SS1303 21 23 7.20SS1304 23 25 7.40SS1305 25 27 7.40SS1306 27 29 7.60SS1307 29 31 8.85SS1308 31 34 8.90SS1309 34 37 9.10SS1310 37 40 9.40SS1311 40 43 9.40SS1312 43 47 11.85SS1313 47 51 11.95SS1314 51 55 12.30SS1315 55 59 12.50SS1316 59 63 12.60SS1317 63 68 12.70SS1318 68 73 17.85SS1319 73 79 18.60SS1320 79 85 18.90SS1321 85 91 19.30SS1322 91 97 19.70SS1323 97 104 20.10SS1324 104 112 20.65SS1325 112 121 21.00SS1326 121 130 21.40SS1327 130 140 29.95SS1328 140 150 30.60SS1329 150 162 31.30SS1330 162 174 31.70SS1331 174 187 32.20SS1332 187 200 32.85SS1333 200 213 33.35SS1334 213 226 33.70SS1335 226 239 34.25SS1336 239 252 34.70SS1337 252 265 44.90SS1338 265 278 48.05SS1339 278 291 51.45SS1340 291 304 55.00SS1341 304 317 58.85SS1342 317 330 64.15SS1343 330 343 69.95SS1344 343 356 76.25SS1345 356 369 83.10SS1346 369 382 90.60SS1347 382 395 98.70SS1348 395 408 107.65


1279

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Hose Clamps

Mikalor O Clips• Zinc plated.

Tech Sheet 1743

Steel, 1 Ear

5556

03012072 8 10 0.2503012013 9 11 0.3503012021 10 12 0.3503012030 11 12 0.3503012048 12 14 0.4503012056 14 16 0.4503012064 16 18.5 0.55

Steel, 2 Ear

5556

03012101 5 7 0.2503012110 7 9 0.3503012128 9 11 0.3503012136 11 12 0.3503012144 13 15 0.4503012152 14 17 0.5503012160 15 18 0.5503012179 17 20 0.5503012187 18 21 0.5503012195 20 23 0.6503012208 22 25 0.7003012216 23 27 0.8003012224 25 28 0.4503012232 28 31 0.9003012240 31 34 1.1003012259 34 37 1.3503012267 37 40 1.4503012275 40 43 1.6503012283 43 46 1.80

Tech Sheet 1744

Stainless Steel, 1 Ear

5556

23012440 7 9 0.7023012087 8 10 0.8023012010 9 11 0.8023012028 10 12 0.9023012036 11 13 0.9023012044 12 14 1.0023012079 12 15 1.0023012052 14 16 1.0023012458 15 17 1.0023012060 16 18 1.1023012423 17 19 1.2523012431 18 20 1.25


5556

23012108 5 7 0.6523012116 7 9 0.8023012124 9 11 0.9023012132 11 13 0.9023012140 12 15 0.9023012159 14 17 1.1023012167 15 18 1.1023012175 17 20 1.2523012183 18 21 1.4523012191 20 23 1.4523012204 22 25 1.80

Mikalor O Clips, Inner Ring Tech Sheet

1745

Steel, 1 Ear

5556

03011010 7.5 9.5 0.6503011029 8.5 10.5 0.6503011037 9.5 11.5 0.6503011045 10.4 12.4 0.6503011053 11.4 13.4 0.8003011061 13.4 15.4 0.8003011070 15.4 17.4 0.90


5556

23012300 6.5 8.5 1.1023012319 8.2 9.5 1.1023012327 8.5 10.4 1.2523012335 9.5 11.4 1.2523012343 10.4 12.4 1.3523012351 11.4 13.4 1.4523012360 12.4 14.4 1.4523012378 13.4 15.4 1.4523012386 14.4 16.4 1.5523012394 15.4 17.4 1.5523012407 16.4 18.4 1.7523012415 17.4 19.4 1.75

• Zinc plated.

• Zinc plated.


1280


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Counter Dispensers

Hi-Grip, Zinc Plated

These new counter dispensers are an ideal point of sale unit for the Automotive, Food, Pharmaceutical and Industrial markets. No return suits all.

100 Clip Dispenser

5557

DISPKZ1 252.05

160 Clips sizes:12mm - 100mm x 10 & 1 x Flexible Driver


160 Clip Dispenser

5557

DISPKZ2 309.20

Hi-Grip, Stainless Steel100 Clips sizes:12mm - 50mm x 10 & 1 x Flexible Driver


100 Clip Dispenser

5557

DISPKS1 379.80

160 Clip Dispenser

5557

DISPKS2 793.50


1281

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Clip Packs

Hi-Grip Mild Steel Assorted Pack• Size ranging from 12mm up to 50mm

135 Assorted, Mild Steel Zinc Plated Clips

5557

HGZAB1 166.55

Hi-Grip Stainless Steel Assorted Pack

135 Assorted, 18/8 Marine, Quality BS304 Stainless Steel Clips

5557

HGSAB1 485.00

P-Clips Mild Steel Assorted Pack• Diameters: 5mm, 6mm, 8mm, 10mm, 13mm, 16mm, 19mm, 21mm, 25mm, 29mm and 35mmStandard Liner: TPE -30°C to +60°C

104 Assorted, Mild Steel Zinc Plated Clips

5557

PCZRAB1 161.45

P-Clips Stainless Steel Assorted Pack

104 Assorted, 18/8 Marine, Quality BS304 Stainless Steel Clips

5557

PCSRAB1 252.05

Zinc Plated Mini Clips Assorted Pack• Diameter Ranges: 7mm-9mm, 8mm-10mm, 9mm-11mm, 10mm-12mm, 11mm-13mm, 12mm-14mm, 13mm-15mm, 14mm-16mm, 15mm-17mm, 16-18mm

157 Assorted, Zinc Plated Mini Clips

5557

MCZAB1 155.10

Flexible DriverPurpose made for all HI-GRIP hose clips with stainless steel shaft and socket.

5557

DHG2BG 22.80

T-Bar DriverSuitable for all HI-TORQUE fi ttings.

5557

DHT3BG 47.95

• Size ranging from 12mm up to 50mm • Diameters: 5mm, 6mm, 8mm, 10mm, 13mm, 16mm, 19mm, 21mm, 25mm, 29mm and 35mmStandard Liner: TPE -30°C to +60°C


1282


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Worm Drive Hose Clamps

Hi-Torque Heavy DutyMaterial:Band and Housing BS304, Screw Hardened to BS410.

Hi-Torque 18/8 Marine available upon request.

5557

HT27 20 27 7.85HT30 20 30 7.85HT35 20 35 7.85HT40 25 40 7.85HT45 25 45 8.00HT50 30 50 8.15HT60 40 60 8.30HT65 45 65 8.45HT70 50 70 8.55HT80 60 80 8.80HT90 70 90 9.05HT95 75 95 9.15HT100 80 100 9.25HT120 90 120 9.70HT140 110 140 10.25HT160 130 160 10.70HT180 150 180 11.20HT200 170 200 11.65HT220 190 220 12.10HT240 210 240 12.60HT260 230 260 13.05HT280 250 280 13.50HT320 290 320 14.50HT340 310 340 15.00HT360 330 360 15.45HT380 350 380 15.05HT400 370 400 16.40HT420 390 420 16.90HT440 410 440 17.40HT460 430 460 16.80HT480 450 480 17.25HT500 470 500 18.75

Hi-Grip Worm Drive Hose ClipMaterial:Mild Steel, Zinc Plated.

Wing Screw to BS5315

5557

510-12 9.5 12 1.25510-16 11 16 1.45510-20 13 20 1.45510-22 14 22 1.60510-25 17 25 1.60510-30 22 30 1.50510-35 25 35 1.65510-40 30 40 1.70510-45 35 45 1.60510-50 35 50 1.80510-55 40 55 1.80510-60 45 60 1.80

Hi-Grip Mini Clips

For Fuel Pipes & Small Hoses

5559

505-9 7 9 0.55505-10 8 10 0.55505-11 9 11 0.55505-12 10 12 0.55505-13 11 13 0.55505-14 12 14 0.55505-15 13 15 0.55505-16 14 16 0.55505-17 15 17 0.55505-18 16 18 0.55

Hi-Grip WDHC

Hi-Grip Mild Steel

5557

WDHCOOO 9.5 12 0.80WDHCMOO 11 16 0.80WDHCOO 13 20 0.85WDHCO 14 22 0.90WDHCOX 17 25 0.90WDHC1A 22 30 1.00WDHC1 25 35 1.05WDHC1X 30 40 1.05WDHC2A 35 50 1.20WDHC2 40 55 1.20WDHC2X 45 60 1.25WDHC3 50 70 1.40WDHC3X 60 80 1.50WDHC4 70 90 1.65WDHC4X 80 100 1.80WDHC5 90 120 2.20

Hi-Grip Stainless Steel

5557

WDHCOOO-SS 9.5 12 2.75WDHCMOO-SS 11 16 2.75WDHCOO-SS 13 20 2.75WDHCO-SS 14 22 3.35WDHCOX-SS 17 25 3.35WDHC1A-SS 22 30 3.45WDHC1-SS 25 35 3.55WDHC1X-SS 30 40 3.70WDHC2A-SS 35 50 4.10WDHC2-SS 40 55 4.30WDHC2X-SS 45 60 4.45WDHC3-SS 50 70 4.85WDHC3X-SS 60 80 5.10WDHC4-SS 70 90 5.55WDHC4X-SS 80 100 5.85WDHC5-SS 90 120 6.50WDHC6-SS 110 140 7.20WDHC7-SS 130 160 7.95

For Hi-Vis Air & Water RPVC Hosesee page 1118


1283

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Clips

M6 P-Clips, 12mm BandMaterial: Mild Steel, Zinc Plated. EPDM Rubber lined.

Page Tech Sheet 589

Mild Steel, Standard Liner

5557

500-05 5 0.90500-06 6 0.90500-08 8 0.90500-09 9 0.90500-10 10 1.00500-12 12 1.05500-13 13 1.05500-16 16 1.10500-19 19 1.20500-21 21 1.25500-22 22 1.25500-25 25 1.40500-28 28 1.45500-29 29 1.50500-32 32 1.60500-35 35 1.60500-40 40 1.70500-44 44 1.80500-48 48 2.00500-52 52 2.15500-56 56 2.35500-60 60 2.55

Material: Mild Steel, Zinc Plated.Standard Liner: TPE -30ºC to +60ºC High temperature rubber liner.TPE 160: -50ºC to +160ºC.

Mild Steel, High Temperature Liner

5557

501-5 5 0.80501-6 6 0.90501-8 8 0.85501-9 9 0.85501-10 10 0.85501-12 12 0.90501-13 13 1.20501-16 16 1.30501-19 19 1.40501-21 21 1.10501-22 22 1.45501-25 25 1.60501-28 28 1.60501-29 29 1.25501-32 32 1.80501-35 35 1.90501-40 40 1.60501-44 44 2.15501-48 48 2.25501-52 52 2.40501-56 56 2.60501-60 60 2.75

304 Stainless Steel, P-Clips, 12mm Band

Stainless Steel, Standard Liner

5557

500-5SS 5 1.80500-6SS 6 1.70500-8SS 8 1.80500-10SS 10 1.80500-13SS 13 1.90500-16SS 16 2.00500-19SS 19 2.15500-21SS 21 2.20500-22SS 22 2.25500-25SS 25 2.35500-28SS 28 2.40500-29SS 29 2.25500-32SS 32 2.55500-35SS 35 2.65500-40SS 40 2.85500-44SS 44 3.10500-48SS 48 3.35500-52SS 52 3.45500-56SS 56 3.65500-60SS 60 3.85

Material: 304 (A2) Stainless Steel. High temperature rubber liner.TPE 160: -50ºC to +160ºC.

Stainless Steel, High Temperature Liner

5557

501-5SS 5 1.65501-6SS 6 1.65501-8SS 8 1.80501-9SS 9 1.70501-10SS 10 1.70501-12SS 12 2.05501-13SS 13 2.15501-16SS 16 1.80501-19SS 19 2.35501-21SS 21 2.05501-22SS 22 2.15501-25SS 25 2.45501-28SS 28 2.20501-29SS 29 2.25501-32SS 32 2.25501-35SS 35 2.55501-40SS 40 2.65501-44SS 44 2.85501-48SS 48 3.10501-52SS 52 3.25501-56SS 56 3.45501-60SS 60 3.65

M10 P-Clips, 20mm BandMaterial: Mild Steel Zinc Plated.High temperature rubber liner.TPE 160: -50ºC to +160ºC.

Mild Steel Zinc Plated, High Temperature Liner

5557

601-6 6 1.05601-8 8 1.10601-10 10 1.25601-13 13 1.30601-16 16 1.40601-19 19 1.50601-22 22 1.65601-25 25 1.65601-28 28 1.65601-32 32 1.80601-36 36 1.90601-40 40 2.00601-44 44 2.25601-48 48 2.35601-52 52 2.60

Material: Stainless Steel (BS304).High temperature rubber liner.TPE 160: -50ºC to +160ºC.

Stainless Steel, High Temperature Liner

5557

601-6SS 6 2.00601-8SS 8 2.05601-10SS 10 2.15601-13SS 13 2.25601-16SS 16 2.15601-19SS 19 2.45601-22SS 22 2.60601-25SS 25 2.85601-28SS 28 2.75601-32SS 32 3.00601-36SS 36 3.15601-40SS 40 3.35601-44SS 44 3.45601-48SS 48 3.75601-52SS 52 4.10


1284


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Steel Strapping & Accessories

201 Band-It Band Stainless Steel Strapping

Band-It patented easy scale make the Band-It clamping system the industries favourite for over 60 years. All Band-It sizes feature fully rounded smooth edges for safety and easy installation.

30.5 Metres

5559

C202 1/4” 0.020” 53.25C203 3/8” 0.025” 64.05C204 1/2” 0.030” 90.50C205 5/8” 0.030” 112.20C206 3/4” 0.030” 124.60

201 Band-It Band BucklesDesigned to accommodate both single and double wrap clamps.

Stainless Steel, Standard, Pack of 100

5559

C252 1/4” 35.70C253 3/8” 40.60C254 1/2” 57.35C255 5/8” 69.65C256 3/4” 82.55

201 Band-It Tote Stainless Steel StrappingSupplied in a handy waterproof packaging. Colour coded for easy identifi cation.

30.5 Metres

5559

C203Y 3/8” 0.025” 77.20C204B 1/2” 0.030” 100.50C205G 5/8” 0.030” 123.45C206R 3/4” 0.030” 145.30

Band-It ValustrapNon-magnetic stainless steel strapping used with Valuclips for securing signs, cable-bundling, pipe insulation and a variety of other lightweight applications.

30.5 Metres

5559

C133 3/8” 0.015” 49.60C134 1/2” 0.015” 67.00C135 5/8” 0.015” 84.30C136 3/4” 0.015” 98.85

Valuclips

Pack of 100

5559

C153 3/8” 36.30C154 1/2” 46.20C156 3/4” 60.80

Band-It Clamping ToolBand-It patented easy scale make the Band-It clamping system the industries favourite for over 60 years. All Band-It sizes feature fully rounded smooth edges for safety and easy installation. Used to apply Band-It Band, Tote and Buckles.

5559

C001 370.10

Band-It JNR Preformed Clamps

5559

JS240 3/4” 6.4 0.51 2.10JS242 1” 6.4 0.51 2.10JS241 1.3/8” 6.4 0.51 2.15JS252 1.1/2” 6.4 0.51 2.20JS253 2” 6.4 0.51 2.40JS256 2.3/4” 6.4 0.51 2.70JS244 3” 6.4 0.51 2.10JS257 3.1/2” 6.4 0.51 6.10JS259 4.1/2” 6.4 0.51 5.75JS201 13/16” 9.5 0.64 2.10JS243 1” 9.5 0.64 2.40JS202 1.3/8” 9.5 0.64 2.30JS245 2” 9.5 0.64 2.50JS246 3” 9.5 0.64 3.10JS255 3.1/4” 9.5 0.64 8.20JS203 1” 12.7 0.76 3.00JS204 1.1/4” 12.7 0.76 3.40JS236 1.3/4” 12.7 0.76 4.30JS230 2.3/4” 12.7 0.76 4.55JS205 1.1/2” 15.9 0.76 4.00JS206 1.3/4” 15.9 0.76 4.50JS207 2” 15.9 0.76 4.90JS208 2.1/4” 15.9 0.76 5.10JS209 2.1/2” 15.9 0.76 5.10JS227 2” 19.1 0.76 6.65JS210 2.3/4” 19.1 0.76 6.70JS211 3” 19.1 0.76 5.10JS212 3.1/2” 19.1 0.76 7.50JS213 4” 19.1 0.76 6.25JS214 4.1/2” 19.1 0.76 9.05JS215 5” 19.1 0.76 7.20JS216 6” 19.1 0.76 11.70JS218 7” 19.1 0.76 17.80


1285

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Clamps & Hose Clips

Jubilee® Clip DispensersThese essential dispensers are easily re-stockable and also carries the extremely useful Flexidriver tool for easy adjustment of Jubliee clips. This can be wall mounted or left free standing.

Contents: Size QuantityOOO 10MOO 10OO 10O 10OX 101A 101 101X 101M 102A 10Jubilee 1Flexidriver®

Stainless Steel

6666

CD-100SS 377.40

Jubilee® Smart DispensersThis new versatile and convenient dispenser dispenses Jubilee clips in boxes of ten and singly and also carries the extremely useful Flexidriver tool for easy adjustment of Jubilee clips.

Contents: Size QuantityOOO 60MOO 60OO 60O 50OX 501A 401 501X 501M 402A 402 40Jubilee 2Flexidriver®

Stainless Steel, 304

6666

SD540SS 2044.00

Mild Steel, Zinc Protected

6666

SD540MS 843.00

Jubilee® Workshop Pack• Assorted Jubilee mild steel clips in a plastic

re-usable box.

Contents: Size QuantityOOO 24MOO 32OO 28O 13OX 141A 121 131X 7

6666

HCP143 186.30

Jubilee® Junior Assortment Pack• 165 Assorted nut and bolt clips (for use on small

bore hoses) in a plastic re-usable box.

Contents: Size Quantity07-09mm 2508-10mm 2509-11mm 2510-12mm 3011-13mm 3012-14mm 30

6666

JA165 123.00


6666

CD-100MS 154.50


1286


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Clamps & Hose Clips

Jubilee® Hose Clips• Precision engineered for quality, Jubilee clips

are Kitemark approved to BS 5315:1991 and manufactured under the BS EN ISO 9002 quality system accepted by the British Standards Institution.

• The mild steel range is zinc protected for corrosion resistance and the stainless steel range is all 304 (A2) material.


6666

OOO-MS OOO 9.5 12 1.00MOO-MS MOO 11 16 1.00OO-MS OO 13 20 1.00O-MS O 16 22 1.20OX-MS OX 18 25 1.201A-MS 1A 22 30 1.301-MS 1 25 35 1.301X-MS 1X 30 40 1.401M-MS 1M 32 45 1.402A-MS 2A 35 50 1.452-MS 2 40 55 1.502X-MS 2X 45 60 1.603-MS 3 55 70 1.703X-MS 3X 60 80 1.854-MS 4 70 90 2.004X-MS 4X 85 100 2.155-MS 5 90 120 2.456-MS 6 110 140 2.706X-MS 6X 120 150 2.907-MS 7 135 165 3.0571/2-MS 7.1/2 158 190 3.7581/2-MS 8.1/2 184 216 4.1091/2-MS 9.1/2 210 242 4.50101/2-MS 10.1/2 235 267 4.85111/2-MS 11.1/2 260 292 5.25121/2-MS 12.1/2 286 318 5.65

Boxed Mild Steel, 10 Clips per Box

6666

OOO-MS-BOX OOO 9.5 12 9.80MOO-MS-BOX MOO 11 16 9.95OO-MS-BOX OO 13 20 10.00O-MS-BOX O 16 22 11.50OX-MS-BOX OX 18 25 11.751A-MS-BOX 1A 22 30 12.451-MS-BOX 1 25 35 13.001X-MS-BOX 1X 30 40 13.551M-MS-BOX 1M 32 45 13.902A-MS-BOX 2A 35 50 14.352-MS-BOX 2 40 55 14.902X-MS-BOX 2X 45 60 15.703-MS-BOX 3 55 70 17.10

304 Stainless Steel

6666

OOO-SS OOO 9.5 12 2.60MOO-SS MOO 11 16 2.60OO-SS OO 13 20 2.70O-SS O 16 22 3.30OX-SS OX 18 25 3.301A-SS 1A 22 30 3.601-SS 1 25 35 3.701X-SS 1X 30 40 3.801M-SS 1M 32 45 3.952A-SS 2A 35 50 4.202-SS 2 40 55 4.402X-SS 2X 45 60 4.653-SS 3 55 70 4.953X-SS 3X 60 80 5.254-SS 4 70 90 5.554X-SS 4X 85 100 5.855-SS 5 90 120 6.406-SS 6 110 140 6.806X-SS 6X 120 150 7.257-SS 7 135 165 7.7071/2-SS 7.1/2 158 190 8.5081/2-SS 8.1/2 184 216 9.7091/2-SS 9.1/2 210 242 10.95101/2-SS 10.1/2 235 267 11.95111/2-SS 11.1/2 260 292 12.70121/2-SS 12.1/2 286 318 13.35

Jubilee® Clipdrivers Tech Sheet

1940

6666

2025-3753 95 13.202025-3761 160 13.55

Jubilee® Flexidriver• For effi cient, rapid and easy adjustment of Jubilee

clips, use the invaluable Flexidriver with fl exible shaft designed to reach all those awkward places.

• 7mm socket.

6666

2025-3779 22.95

Tech Sheet 591

Tech Sheet 1940

For Industrial PU Ducting see pages 1176-1190


1287

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

304 Stainless Steel

6666

JSC19SS304 17 19 3.30JSC22SS304 20 22 3.40JSC25SS304 23 25 3.55JSC28SS304 26 28 3.70JSC31SS304 29 31 3.80JSC35SS304 32 35 3.95JSC39SS304 36 39 3.95JSC43SS304 40 43 3.95JSC47SS304 44 47 4.00JSC51SS304 48 51 4.05JSC55SS304 52 55 4.15JSC59SS304 56 59 4.20JSC63SS304 60 63 4.30JSC67SS304 64 67 9.10JSC73SS304 68 73 8.50JSC79SS304 74 79 8.55JSC85SS304 80 85 8.65JSC91SS304 86 91 8.90JSC97SS304 92 97 8.95JSC103SS304 98 103 9.05JSC112SS304 104 112 9.15JSC121SS304 113 121 9.40JSC130SS304 122 130 9.60JSC139SS304 131 139 9.85JSC148SS304 140 148 9.95JSC161SS304 149 161 10.15JSC174SS304 162 174 10.35JSC187SS304 175 187 11.80JSC200SS304 188 200 12.20JSC213SS304 201 213 12.55JSC226SS304 214 226 13.10JSC239SS304 227 239 13.70

316 Stainless Steel

6666

JSC19SS316 17 19 5.95JSC22SS316 20 22 6.20JSC25SS316 23 25 6.50JSC28SS316 26 28 6.65JSC31SS316 29 31 6.90JSC35SS316 32 35 7.15JSC39SS316 36 39 7.20JSC43SS316 40 43 7.20JSC47SS316 17 19 5.95JSC51SS316 48 51 7.40JSC55SS316 52 55 7.55JSC59SS316 56 59 7.60JSC63SS316 60 63 7.80JSC67SS316 64 67 16.50JSC73SS316 68 73 16.75JSC79SS316 74 79 16.95JSC85SS316 80 85 17.05JSC91SS316 86 91 17.50JSC97SS316 92 97 17.60JSC103SS316 98 103 17.85JSC112SS316 104 112 18.10JSC121SS316 113 121 18.55JSC130SS316 122 130 18.95JSC139SS316 131 139 19.35JSC148SS316 140 148 19.60JSC161SS316 149 161 20.00JSC174SS316 162 174 20.50JSC187SS316 175 187 23.30JSC200SS316 188 200 24.05JSC213SS316 201 213 24.70JSC226SS316 214 226 25.85JSC239SS316 227 239 27.05

Clamps & Hose Clips

Jubilee® SuperclampsJubilee® Superclamps are manufactured in mild steel zinc plated, all 304 stainless and all 316 stainless steel and the later are predominantly suitable for applications where high corrosion resistance is required. These powerful clamps are ideal for marine and offshore oil and gas applications, as well as the food and chemical industries.

These clamps can also be used in place of SAE J1508 type TB or T-Bolt style clamps.Superclamps are particularly suitable for delivery and suction hoses requiring a very tight seal and agricultural applications, waste water extraction, mining, quarrying or in other sectors where a heavy duty clamp is required.

• Single nut adjustment.• Smooth band protects hose.• Bridge piece ensures 360° seal.• Solid trunion maximises torque.• Assembly by manual or automatic tools.• Chromium VI free fi nish on all materials.

Page Tech Sheet 590

Mild Steel

6666

JSC19 17 19 2.30JSC22 20 22 2.30JSC25 23 25 2.35JSC28 26 28 2.45JSC31 29 31 2.60JSC35 32 35 3.30JSC39 36 39 3.40JSC43 40 43 3.50JSC47 44 47 3.60JSC51 48 51 3.60JSC55 52 55 3.70JSC59 56 59 3.90JSC63 60 63 4.00JSC67 64 67 4.85JSC73 68 73 4.85JSC79 74 79 5.45JSC85 80 85 5.55JSC91 86 91 5.75JSC97 92 97 5.80JSC103 98 103 5.95JSC112 104 112 6.00JSC121 113 121 6.20JSC130 122 130 6.75JSC139 131 139 6.90JSC148 140 148 6.95JSC161 149 161 7.25JSC174 162 174 7.80JSC187 175 187 7.90JSC200 188 200 8.15JSC213 201 213 8.95JSC226 214 226 9.80JSC239 227 239 10.75

Customers who bought from this page also purchased Suction Hose – see pages 1158-1160


1288


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Jubilee® Stainless Steel High Torque Hose Clips• Jubilee® High Torque clips for applications that require additional high levels

of tightening torque; twice the tightening torque of standard worm drive clips. Recommended tightening torque 17 Nm (150 lb in).

• All stainless steel construction.

6666

JHT35 20 35 7.60JHT40 25 40 7.60JHT45 25 45 8.00JHT50 30 50 8.15JHT70 40 70 8.60JHT80 60 80 8.85JHT95 70 95 9.10JHT100 80 100 9.40JHT120 90 120 9.95JHT140 110 140 10.35JHT160 130 160 10.70JHT180 150 180 11.20JHT200 170 200 11.85JHT220 190 220 12.35JHT240 210 240 12.90JHT260 230 260 13.35JHT280 250 280 13.80JHT300 270 300 14.30JHT320 290 320 14.80JHT340 310 340 15.30JHT360 330 360 15.75JHT380 350 380 16.25JHT400 370 400 16.75JHT420 390 420 17.20JHT440 410 440 17.70JHT480 450 480 18.70JHT500 470 500 19.15

Jubilee® Multiband• Mild Steel Zinc Plated.• Construct your own fastener- cut to size and choose from a

choice of standard slotted screw, captive screw or fl ip-lock screw on 7mm stainless steel only.

• Banding also available in 11mm mild steel zinc plated, 11mm stainless steel (304) and 7mm stainless steel (304).

Tech Sheet 1942

10 Metre Lengths

6666

2025-3720 11 42.40

30 Metre Lengths

6666

2025-3738 11 115.50

25 Sets 11mm Housing and Screws

6666

2025-3746 38.45

Clamps & Hose Clips

Tech Sheet 1941

For Industrial Ducting see pages 1174-1175


1289

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Automotive Hose Clips

Jubilee® Juniors (Nut & Bolt Clips)• Used on petrol pipe, heaters & small bore hoses.


6666

NB0709 7 9 0.55NB0810 8 10 0.55NB0911 9 11 0.55NB1012 10 12 0.55NB1113 11 13 0.55NB1214 12 14 0.55NB1315 13 15 0.55NB1416 14 16 0.55NB1517 15 17 0.55NB1618 16 18 0.55

Jubilee® Handy Packs• The most popular sizes of premium brand Jubliee® hose clips individually

boxed and handily packed in their own outer display carton.• Pack consists of: 10 of each size OOO, MOO, OO, O, OX,1A,1, 1X, 1M &2A.


6666

HP100MS 120.15

Stainless Steel

6666

HP100SS 331.25

Jubilee® Pocket Packs• Never again be caught out without that essential Jubilee clip to complete

the job. The compact container holds a useful selection of clips for all those necessary hose jointing applications as well as holding nuts & bolt clips for joining small bore hoses and petrol pipes.

• Pack consists of: 4 of each OO, O, OX, NB0709 & NB1113. 2 of each 1 & 1X.


6666

PPAUTO 26.25

Tech Sheet 10310

Tech Sheet 10584

Customers who bought from this page also purchased Car Heater Hose SAEJ20R3 & Petrol Hose SAEJ30R6see page1166


1290


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Clips & Clamps

NORMA® Hose Clips

A World Leader in the design & supply of sealing, connecting & clamping solutions.High performance products specifi ed by the world’s leading manufacturers for all their hose, tube and pipe applications.• Specially designed for the perfect seal • Quality Assured engineering & manufacture to ISO 9002, QS 9000 and ISO 14001.• Over 3 million parts produced EVERY day allows us to give the customer exceptional value.

Mild Steel Alu-Zinc Plated

7777

NOR-OOO 8 12 9 0.65NOR-MOO 10 16 9 0.65NOR-OO 12 22 9 0.65NOR-O 16 27 12 0.65NOR-1A 20 32 12 0.65NOR-1 25 40 12 0.90NOR-2A 35 50 12 0.90NOR-2 40 60 12 1.00NOR-2X 40 60 12 0.90NOR-3 50 70 12 1.00NOR-3X 60 80 12 1.50NOR-4 70 90 12 1.55NOR-4X 80 100 12 1.50NOR-5 90 110 12 2.15

All Stainless Steel

7777

NOR-SS-75-12 8 12 7.5 2.10NOR-SS-75-16 10 16 7.5 2.10NOR-SS-75-18 12 18 7.5 2.15NOR-SS-OOO 8 16 9 1.80NOR-SS-MOO 8 16 9 1.95NOR-SS-OO 12 22 9 2.20NOR-SS-O 16 27 12 2.50NOR-SS-OX 16 27 12 2.20NOR-SS-1A 20 32 12 2.30NOR-SS-1 25 40 12 2.60NOR-SS-1X 25 40 12 2.35NOR-SS-2A 32 50 12 2.70NOR-SS-2 40 60 12 3.20NOR-SS-2X 40 60 12 2.70NOR-SS-3 50 70 12 2.80NOR-SS-3X 60 80 12 3.05NOR-SS-4 70 90 12 3.75NOR-SS-4X 80 100 12 3.40NOR-SS-5 90 110 12 3.65

NORMA® High Torque Hose Clips• Recommended

Tightening Torque 17 Nm (150lb in)

All Stainless Steel, 16mm Band Width

7777

NOR-HD45 25 45 5.75NOR-HD54 32 54 5.35NOR-HD67 45 67 5.45NOR-HD79 57 79 5.70NOR-HD92 70 92 6.00NOR-HD118 95 118 6.45NOR-HD130 108 130 6.65NOR-HD143 121 143 6.80NOR-HD168 146 168 7.25NOR-HD181 159 181 7.40NOR-HD194 172 194 7.30NOR-HD232 210 232 8.00

NORMA® Quick Assembly 1 Piece Cobra Hose Clips• Low Profi le, Easy

Fit Hose Clip

Stainless Steel

7777

NOR-COBRA75 7.5 7 0.55NOR-COBRA8 8 7 0.65NOR-COBRA9 9 7 0.60NOR-COBRA10 10 7 0.60NOR-COBRA105 10.5 7 0.60NOR-COBRA11 11 7 0.60NOR-COBRA115 11.5 7 0.65NOR-COBRA12 12 8 0.90NOR-COBRA13 13 8 0.90NOR-COBRA14 14 8 0.65NOR-COBRA15 15 8 0.90NOR-COBRA16 16 8 0.65NOR-COBRA17 17 8 0.90NOR-COBRA18 18 8 0.90NOR-COBRA19 19 8 0.90NOR-COBRA20 20 8 0.75NOR-COBRA21 21 8 0.75NOR-COBRA24 24 8 0.90NOR-COBRA26 26 8 0.75NOR-COBRA27 27 8 0.80NOR-COBRA28 28 8 0.75NOR-COBRA29 29 8 0.80

NORMA® Clamp GBS M Heavy Duty Clamp• Up to 70% higher band tenson than leading

competitor• Wide clamping range 17mm to 252mm• Environmentally friendly - Chrome VI Free• Mechanically locked so no spot weld weakness• Rounded band edges for hose protection• DIN 3017 Accredited

Clamps Supplied in W2 Material

7777

NOR-05917182018 17 19 1.35NOR-05917182020 19 21 1.35NOR-05917182022 21 23 1.35NOR-05917182024 23 25 1.35NOR-05917182026 25 27 1.30NOR-05917182028 27 29 1.30NOR-05917182030 29 31 1.30NOR-05917182033 31 34 1.30NOR-05917182036 34 37 1.45NOR-05917182039 37 40 1.50NOR-05917182042 40 43 1.50NOR-05917202045 43 47 1.80NOR-05917202049 47 51 1.80NOR-05917202053 51 55 1.80NOR-05917202057 55 59 1.85NOR-05917202061 59 63 1.85NOR-05917202066 63 68 1.90NOR-05917252071 68 73 2.70NOR-05917252076 73 79 2.80NOR-05917252082 79 85 2.80NOR-05917252088 85 91 2.80NOR-05917252094 91 97 2.90NOR-05917252101 97 104 3.05NOR-05917252108 104 112 3.20NOR-05917252117 112 121 3.20NOR-05917252126 121 130 3.30NOR-05917302135 130 140 4.85NOR-05917302145 140 150 4.95NOR-05917302156 150 162 5.00NOR-05917302168 162 174 5.15NOR-05917302181 174 187 5.35NOR-05917302194 187 200 5.45NOR-05917302207 200 213 5.55NOR-05917302220 213 226 5.70NOR-05917302233 226 239 5.90NOR-05917302246 239 252 6.30

• Top Sealing Performance through its Unique Design

• Top Sealing Performance through its Unique Design


1291

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Clips & Clamps

NORMA O Type HD Pipe Clip• EPDM Rubber Sleeve• Vibration Damping• Reinforced Fixing Hole For M6 Bolt

Mild Steel Zinc Plated, 15mm Band Width

7777

NOR-RSGUO-21 21 4.50NOR-RSGUO-25 25 4.50

NORMA® P Type Pipe Clip• EPDM Rubber Sleeve• Vibration Damping• Fixing Hole For M6 Bolt

Mild Steel Alu-Zinc Plated, 12mm Band Width

7777

NOR-RLGUP-5 5 0.90NOR-RLGUP-6 6 0.90NOR-RLGUP-8 8 0.90NOR-RLGUP-9 9 0.75NOR-RLGUP-10 10 0.90NOR-RLGUP-12 12 1.00NOR-RLGUP-13 13 0.80NOR-RLGUP-16 16 0.90NOR-RLGUP-19 19 1.00NOR-RLGUP-21 21 1.00NOR-RLGUP-22 22 1.25NOR-RLGUP-25 25 1.25NOR-RLGUP-28 28 1.10NOR-RLGUP-29 29 1.20NOR-RLGUP-32 32 1.25NOR-RLGUP-35 35 1.50NOR-RLGUP-40 40 1.55NOR-RLGUP-44 44 1.70

NORMA® P Type HD Pipe Clip


7777

NOR-RSGUP-6 6 1.35NOR-RSGUP-8 8 1.35NOR-RSGUP-10 10 1.55NOR-RSGUP-12 12 1.35NOR-RSGUP-13 13 1.35NOR-RSGUP-16 16 1.55NOR-RSGUP-19 19 1.55NOR-RSGUP-21 21 1.70NOR-RSGUP-22 22 2.05NOR-RSGUP-25 25 2.05NOR-RSGUP-28 28 1.60NOR-RSGUP-30 30 2.05NOR-RSGUP-32 32 3.20NOR-RSGUP-35 35 2.60

Wall Mounted Display DispenserPart No. Min. Max. Band Qty. Size Size Width NOR-OOO 8 12 9 10NOR-MOO 10 16 9 10NOR-OO 12 22 9 10NOR-O 16 27 12 8NOR-OX 16 27 12 8NOR-1A 20 32 12 8NOR-1 25 40 12 8NOR-2A 35 50 12 8NOR-2 40 60 12 8NOR-3 50 70 12 8

With 86 Clips

7777

NOR-8880000080 73.95

NORMA® U Type HD Pipe Clip


7777

NOR-RSGUU-6 6 4.25NOR-RSGUU-12 12 4.25NOR-RSGUU-13 13 4.25NOR-RSGUU-16 16 4.40NOR-RSGUU-19 19 4.40NOR-RSGUU-21 21 4.65NOR-RSGUU-22 22 4.65NOR-RSGUU-25 25 4.65NOR-RSGUU-28 28 4.50NOR-RSGUU-30 30 4.65NOR-RSGUU-35 35 7.60

Box Set ClipsPart No. Min. Max. Band Qty. Size Size Width NOR-OOO 8 12 9 24NOR-MOO 10 16 9 22NOR-OO 12 22 9 24NOR-OX 16 27 12 24NOR-1A 20 32 12 10NOR-1 25 40 12 16

With 120 Clips

7777

NOR-8880000003 73.95


1292


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Pipe Repair Couplings

NORMA® Pipe Repair Couplings

A World Leader in the design & supply of sealing, connecting & clamping solutions.High Specifi cation Stainless Steel Coupling for Repairing Leaks to Pressure Pipes• NBR Sealing Sleeve • Double Lip Seal Design • Upto 16 bar Pressure Rating • Suitable for Metal and Most Plastic Pipes

7788

NOR-FGRR355 34.5 35.5 105.05NOR-FGRR429 39 42.9 106.35NOR-FGRR45 43 45 106.35NOR-FGRR488 45.5 48.8 107.00NOR-FGRR549 53.6 54.9 107.00NOR-FGRR576 55 57.6 107.05NOR-FGRR609 57.7 60.9 110.90NOR-FGRR74 72.6 74 133.30NOR-FGRR769 74 76.9 133.30NOR-FGRR85 83 85 137.85NOR-FGRR896 85.1 89.8 137.85NOR-FGRR1029 101 102.9 145.10NOR-FGRR106 103 106 145.10NOR-FGRR111 109 111 145.10NOR-FGRR1154 112 115.4 145.10NOR-FGRR156 153 156 195.00NOR-FGRR170 166 170 199.60

NORMA® Connect Grip Pipe Couplings• Axial pipe coupling for connecting unrestrained

metal pipes• Strip insert inclided as standard for seal protection• Unique double lip sealing system• Progressive locking effect• Rapid installation time• Up to 16 bar (nominal) pressure rating


7788

NOR-05788400026 26.4 27.5 61.35NOR-05788400033 33 34.3 61.35NOR-05788400042 41.7 43 62.60NOR-05788400048 47.6 50.5 62.60NOR-05788400060 59.5 61 67.50NOR-05788400076 75.2 77 83.40NOR-05788400088 87 89.9 88.30NOR-05788400114 113 115 101.65NOR-05788400139 138.1 141.6 138.95NOR-05788400168 166.5 170.1 159.55NOR-05778400219 216 221 337.40

NORMA® Connect Flex Pipe Couplings• Axial pipe coupling for connecting restrained

metal &/or plastic pipes• Strip insert included as standard for seal protection• Unique double lip sealing system• Accommodates changes in pipe length &

misalignment• Rapid installation time• Up to 16 bar (nominal) pressure rating


7788

NOR-05738400026 26.5 27.4 54.45NOR-05738400033 33 34.3 57.70NOR-05738400042 41.7 43 63.25NOR-05738400048 47.6 50.5 63.25NOR-05738400060 59.5 61 64.50NOR-05738400076 75.2 77 79.80NOR-05738400088 87 89.9 81.60NOR-05738400114 113 115.5 85.90NOR-05738400139 138.1 141.6 116.60NOR-05738400168 166.5 170.1 122.70NOR-05738400180 178 182 206.80NOR-05738400193 192 196 206.80NOR-05738400206 202 208 239.35NOR-05738400219 216 221 239.35NOR-05738400267 264 269 246.25NOR-05738400355 352 359 295.75NOR-05738400406 402 410 302.10NOR-05738400508 505 510 342.90NOR-05738400609 606 613 390.60

• Easy assembly and disassembly• Re-useable• Patented double-lip seal• Standard steel strip insert• Suitable for both high pressure and vacuum

applications

Customers who bought from this page also purchased Galvanised Tubing – see page 1071


1293

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics


You can now join or repair practically any type of pipe (even dissimilar materials) without the use of special tools, welding, threading, grooving or fl anges and in a fraction of the time taken using traditional methods.The couplings are manufactured in stainless steel and are available with a choice of sealing materials, which ensure they are compatible with virtually any media.

Sizes are available from 21mm to 3 metres in diameter and all are manufactured in compliance with ISO9002: 1994. In addition to the strict quality control in the manufacturing process, the range has many internationally recognised type approvals including Lloyds register, American Bureau of Shipping, Bureau Veritas, Det Norke Veritas & Germanisher Lloyds.

Grip Ring Couplings

0142

GR-S-20A 26 28 62.90GR-S-25A 33 35 60.45GR-S-40A 47 49 80.95GR-S-65A 75 78 112.60GR-S-80A 88 92 139.05GR-S-150A 163 167 234.40

Multi-Flex Couplings

0142

MF-RS-15A 21 23 42.80MF-RS-20A 26 28 44.15MF-RS-25A 33 35 47.90MF-RS-32A 42 44 51.35MF-RS-40A 47 49 55.15MF-RS-50A 58 61 73.45MF-RS-65A 75 78 81.05MF-RS-80A 88 91 89.35MF-RS-150A 163 167 117.50MF-RS-200A 214 219 154.40

Repair Clamps, Hinged Type

0142

RCH-S-15A 21 23 55.60RCH-S-20A 26 28 58.40RCH-S-25A 33 35 63.45RCH-S-32A 42 44 64.70RCH-S-40A 47 49 69.50RCH-S-50A 58 61 92.55RCH-S-65A 75 78 94.50RCH-S-80A 88 91 116.00RCH-S-100A 113 117 131.90RCH-S-125A 138 142 142.40RCH-S-150A 163 167 166.75


For UPVC & ABS Piping System see pages 783-803

Tech Sheet 10654

Tech Sheet 10652

Tech Sheet 10653


1294


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

2 Ear Clamp

Steel Zinc Plated DIN 1.0338

5559

OET0041 3.1 4.1 0.35OET0045 3.5 4.5 0.45OET0305 3 5 0.45OET0507 5 7 0.45OET0709 7 9 0.50OET0811 8 11 0.50OET0911 9 11 0.50OET1113 11 13 0.55OET1315 13 15 0.55OET1517 15 17 0.65OET1518 15 18 0.65OET1619 16 19 0.70OET1720 17 20 0.70OET1922 19 22 0.85OET2023 20 23 0.85OET2225 22 25 1.00OET2327 23 27 1.00OET2528 25 28 1.10OET2731 27 31 1.20OET2831 28 31 1.10OET3134 31 34 1.20OET3437 34 37 1.30OET3740 37 40 1.30OET4043 40 43 1.40

Stainless Steel DIN 1.4301

5559

0041R 3.1 4.1 0.700045R 3.5 4.5 0.700305R 3 5 0.750507R 5 7 0.700709R 7 9 0.850911R 9 11 0.751113R 11 13 0.751315R 13 15 0.951517R 15 17 1.401518R 15 18 1.101720R 17 20 1.201922R 19 22 1.502023R 20 23 3.802225R 22 25 1.802327R 23 27 2.002528R 25 28 2.102731R 27 31 2.402831R 28 31 2.553134R 31 34 2.603437R 34 37 2.703740R 37 40 3.304043R 40 43 3.404346R 43 46 3.40

1 Ear Clamp

308 Stainless Steel DIN 1.4301

5559

051R 4.1 5.1 0.70061R 5.1 6.1 0.80083R 7.1 8.3 0.80087R 7.5 8.7 0.75090R 7.5 9 0.75095R 8.1 9.5 0.75105R 9.1 10.5 0.75110R 9.3 11 0.70113R 9.6 11.3 0.80120R 10.1 12 0.85128R 10.8 12.8 0.95133R 11.3 13.3 0.95138R 11.8 13.8 0.80140R 12 14 0.85145R 12.5 14.5 0.70150R 13 15 1.00168R 14.6 16.8 0.90175R 15.3 17.5 1.20185R 16.3 18.5 1.45195R 17.2 19.5 1.45200R 17.7 20 1.45207R 17.9 20.7 1.45210R 18.7 21 1.50225R 19.9 22.5 1.40245R 21.7 24.5 1.65307R 27.2 30.7 1.70

1 Ear Stepless® Clamps, Stainless Steel 1.4301/UNS S30400Narrow band - Concentrates transmission of clamping force, less weight.Stepless over 360° - Uniform compression or uniform surface pressure.Clamp ear - Compensates for component tolerances, adjustable surface pressure.

Dimple - increases clamping force, spring-effect compensates for changes in diameter due to thermal expansion.Burr-free strip edges - reduced risk of damage to parts being clamped

Band Width 5mm, Thickness 0.5mm

5559

16702488 5.3 6.5 0.4516700001 5.8 7 0.4516700002 6.8 8 0.4516700003 7 8.7 0.5016702491 7.3 9 0.5016700004 7.8 9.5 0.5016700005 8.3 10 0.5516700006 8.8 10.5 0.5516702492 9.2 10.9 0.5516700007 9.6 11.3 0.6016700008 10 11.8 0.60

Band Width 7mm, Thickness 0.6mm

5559

16702951 9.4 11.9 0.6016700009 9.8 12.3 0.6016702493 10.3 12.8 0.6016700010 10.8 13.3 1.3516700011 11.3 13.8 0.6016700012 11.5 14 0.6016702864 11.7 14.2 0.6016700013 12 14.5 0.6516700014 12.3 14.8 0.6516700015 12.8 15.3 0.6516700016 13.2 15.7 0.6516702998 13.5 16 0.6516702494 13.7 16.2 0.6516702495 14.1 16.6 0.6516702496 14.3 16.8 0.6516700017 14.5 17 0.6516702497 15 17.5 0.6516700018 14.6 17.8 0.6516700019 14.8 18 0.6516700020 15.3 18.5 0.7016700110 16 19.2 0.8016702498 16.6 19.8 0.7016700024 17.8 21 0.85

O Clips

5559

16700026 19.4 22.6 1.0016700028 20.3 23.5 1.0016700029 20.9 24.1 1.5516702148 22.4 25.6 1.0016700033 23.9 27.1 1.0016700055 40.8 44 1.0516700037 26.9 30.1 1.0016702993 27.6 30.8 1.0016700040 28.4 31.6 1.0016700042 29.9 33.1 1.0016700044 31.4 34.6 1.0016700046 32.9 36.1 1.0016700048 34.4 37.6 1.0516700050 34.9 38.1 1.0516700052 36.4 39.6 1.0516700053 37.8 41 1.0516700054 39.3 42.5 1.0516704055 25.4 28.6 1.0516700056 42.3 45.5 1.0516700057 43.8 47 1.0516700058 45.3 48.5 1.0516700059 46.8 50 1.05

Tech Sheet 10445


1295

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Tool Clips, Pen & Tool Holders

Tool Clips• Steel Zinc Plated

Closed Type

0108

TERR-80.06-2 6 7 0.30TERR-80.10-2 10 12 0.30TERR-80.13-2 13 14 0.40TERR-80.16-2 16 19 0.35TERR-80.19-2 19 21 0.50TERR-80.25-2 25 27 0.60TERR-80.28-2 28 31 0.70TERR-80.32-3 32 34 1.20TERR-80.38-3 38 40 1.75TERR-80.51-3 51 54 2.10

Open Type

0108

TERR-81.06-2 6 7 0.35TERR-81.10-2 10 12 0.35TERR-81.13-2 13 14 0.35TERR-81.16-2 16 19 0.45TERR-81.19-2 19 21 0.50TERR-81.25-2 25 27 0.50TERR-81.28-2 28 31 0.65TERR-81.32-3 32 34 0.90TERR-81.38-3 38 40 1.40TERR-81.51-3 51 54 1.65

Worm Drive Clips• Powergrip range of high performance hose

clamps manufactured to BS5315 - 1991 standard • Kitemark accredited • Mild steel with Alu-zinc coating for improved

corrosion resistance

Steel

0108

WDCOOO OOO 9.5 12 0.70WDCMOO MOO 11 16 0.90WDCOO OO 13 20 0.90WDCO O 16 22 0.90WDCOX OX 18 25 0.90WDC1A 1A 22 30 0.90WDC1 1 25 35 0.80WDC1X 1X 30 40 0.90WDC2A 2A 35 50 0.90WDC2 2 40 55 0.90WDC2X 2X 45 60 1.00WDC3 3 55 70 1.10WDC3X 3X 60 80 1.25WDC4 4 70 90 1.40WDC4X 4X 85 100 1.45WDC5 5 90 120 1.80WDC6 6 110 140 2.15WDC7 7 130 160 2.20WDC8 8 150 180 2.70WDC9 9 175 205 2.90WDC10 10 200 230 3.25WDC11 11 225 255 3.55WDC12 12 250 288 3.75WDC13 13 275 305 3.55

Pen & Pencil Clips• Nickel Plated Steel• These are used for Pens, Pencils and Special

Measuring Tools in Brief Cases, Tool Boxes and Pockets

0108

TERR-90.01-2 7-15mm Single 2.40TERR-90.02-2 7-15mm Double 4.10TERR-90.03-2 7-15mm Triple 5.25

For

PNEUMATICPOWER TOOLS see pages 1426-1431


1296


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Superklip

Superklips

Grey RAL 7035

5558

389001 11.8 14.3 100 100.05389002 14.3 16.8 100 100.05389003 16.8 19.5 100 104.65389004 19.5 21.8 100 170.35389005 21.8 24.8 100 150.15389006 24.8 27.8 50 91.00389007 27.8 31.2 50 109.20389008 31.2 35.5 50 166.05389009 35.5 39.5 50 166.05389011 39.5 43.5 25 130.90389014 58.5 64 20 186.50

Superklip Fixings

Threaded Nut

5558

389051 M6 100 36.40389052 M8 100 45.50

Base Plates

5558

389015 Double 50 113.40

• Premium Grade Polyamide PA6• Recyclable• Range of Colours• KIWA Certifi ed• Oil & Petrol Resistant• Age Resistant, UV Resistant, Suitable

for Outdoor Applications• The pipe clamp closes itself when

the tube is inserted. So installation is very easy, just push in the pipe and it is fi xed.

• Pipe Sizes 11.8mm to 64mm (1/4” to 2”).

• The Caddy Superklip is a universally applicable pipe clamp with KIWA Certifi cation that is suitable for both indoor & outdoor applications.

• Fasten with either wood screw, dual threaded screw with or without collar, nail with collar or threaded bolt.

Temperature:-40°C to +80°C

Page Tech Sheet 550


1297

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Fixing & Support Systems

Rubber Lined Pipe Fixings• Single screw insulated pipe

clips for easy installation & maintenance, for pipes from 12mm to 114mm OD.

Tech Sheet 2135

SUPERFIX M8/M10 Easy Lock

5558

400063 12-14 1.50400064 15-19 1.50400065 21-23 1.65400066 26-28 1.70400067 32-35 1.95400068 40-43 2.00400069 44-49 2.10400070 48-52 2.50589350 54-58 2.60400071 57-61 2.70400072 63-67 2.60400073 70-73 3.20400074 74-80 3.40400075 83-91 4.30400076 101-106 5.00400077 108-114 5.55

• Double screw insulated pipe clips for pipes from 12mm to 315mm OD.

MACROFIX M8/M10

5558

IPC12 12-15 2.35IPC16 15-19 2.40IPC20 20-24 2.15IPC25 25-30 2.30IPC32 32-37 2.30IPC39 40-45 2.60IPC44 44-49 3.50IPC48 48-53 2.60IPC54 54-58 2.70IPC29 59-63 4.20IPC62 62-64 4.50IPC67 68-73 4.20IPC74 75-80 4.25IPC80 82-86 4.25IPC87 89-91 4.80IPC99 95-103 5.45IPC108 108-116 6.00IPC120 121-127 6.55IPC129 129-135 8.00IPC135 133-141 7.10IPC159 159-162 7.60IPC162 165-168 8.60IPC200 198-202 16.75IPC210 210-215 19.50IPC220 216-200 13.20IPC225 225 14.80IPC250 250 17.60IPC280 274-280 15.50IPC300 315 16.40

CADDY® Stainless Steel Fixings & Supports• Stainless Steel double screw insulated pipe clips

for pipes from 12mm to 220mm OD.

Tech Sheet 2137

Tech Sheet 2137

Stainless Steel S 316 MACROFIX M8/M10 Insulated

5558

595595 1/4” 12-15 M8 9.80595600 3/8” 15-19 M8 10.25595620 3/4” 25-30 M8 10.75595630 1” 32-37 M8 11.30595640 1.1/4” 40-45 M8 12.20595650 1.1/2” 48-53 M8 12.65595660 - 54-58 M8 13.70595670 2” 59-63 M8 13.90595675 - 62-64 M8 19.00595680 - 68-73 M8 26.55595690 2.1/2” 75-80 M8 21.70595695 - 82-86 M8 22.60595700 3” 89-91 M10 25.45595710 - 95-103 M10 26.05595720 4” 108-116 M10 28.10595730 - 121-127 M10 37.60595740 - 129-135 M10 38.90595750 5” 133-141 M10 39.05595755 - 159-162 M10 38.00595760 6” 165-168 M10 38.60595770 - 198-202 M10 67.75595780 8” 216-220 M10 70.30

• Stainless Steel double screw non insulated pipe clips for pipes from 14mm to 168mm OD.

Stainless Steel S 316 MACROFIX M8/M10 Non Insulated

5558

595400 3/8” 14-18 M8 9.35595410 1/2” 20-26 M8 9.35595420 3/4” 23-30 M8 9.60595430 1” 33-40 M8 10.10595440 1.1/4” 41-47 M8 10.45595450 1.1/2” 48-54 M8 11.30595470 2” 56-62 M8 11.65595475 - 62-69 M8 14.35595480 - 67-71 M8 15.20595490 2.1/2” 69-78 M8 20.30595500 3” 85-91 M8 21.30595505 - 90-98 M10 26.55595510 3.1/2” 97-107 M10 25.65595520 - 104-110 M10 27.45595530 4” 108-116 M10 27.55595535 - 116-126 M10 28.20595540 - 129-140 M10 32.20595550 5” 133-141 M10 32.40595555 - 144-154 M10 35.60595560 6” 159-168 M10 35.90

Unlined Pipe Fixings• Double screw non insulated pipe clips for pipes

from 14mm to 315mm OD.

Tech Sheet 2136

MACROFIX M8/M10 Non Insulated

5558

PC15 14-18 1.75PC18 20-26 2.70PC24 23-30 1.80PC32 33-40 1.95PC39 41-47 2.00PC47 48-54 2.20PC54 56-62 2.60PC60 62-69 2.70PC68 67-71 3.10PC75 69-78 4.05PC83 85-91 4.00PC90 90-98 3.30PC94 97-101 3.65

5558

PC104 104-110 5.55PC110 108-116 4.95PC117 116-126 4.50PC129 129-140 4.85PC144 144-154 5.15PC170 168-176 8.15PC180 174-184 8.90PC210 207-218 14.00PC225 225 11.40PC250 250 13.00PC280 274-280 13.50PC300 315 13.50

Tech Sheet 2135


1298


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips


SUPERFIX LF M8 for Plastic Pipes• Single screw insulated pipe clips P1 coated,

allowing easy installation & maintenance for plastic pipe from 14mm to 110mm OD.

Tech Sheet 2138

Easy Lock

5558

595050 14-16 1.95595055 20-23 2.00595060 25-28 2.10595065 32-35 2.50595070 40-43 2.60595075 50-55 3.05595080 63-67 3.90595090 90 5.90595095 110 8.25

OD-Strut Pipe Clamp

5558

598811 6-8 2.20598812 8-11 2.20598813 11-12 2.30598814 15-17 2.30598815 18-20 2.30598816 21-23 2.30598817 23-26 2.30598818 26-29 2.35598819 29-32 2.35598822 32-36 2.40598823 36-39 2.50598824 39-42 2.60598825 42-45 2.60598826 46-50 2.60598827 50-54 2.60598828 52-56 2.60598829 56-60 2.80598831 60-63 2.95598832 62-64 3.10598833 64-67 4.20598834 67-71 4.30

CADDY® Support Systems• Male to female

thread reducers. Electro zinc plated.

Hexagonal Reducers

5558

1-9

10+

583710 6 8 0.90 0.80583720 8 6 0.80 0.75583730 8 10 0.90 0.80583740 8 12 0.70 0.65583750 10 8 0.90 0.80583760 10 12 0.80 0.75583770 12 8 1.10 1.00583780 12 10 1.10 1.00

• FM & VDS approved beam clamps with threaded and plain holes in electro zinc plated.

Tech Sheet 2139

• Wedge anchors electro zinc plated with internal thread FM, VDS & DIN 4102-2 approved.

• A quick & easy installation method to support pipe & cable installations on fl at roofs and below raised fl oor systems. Consists of heavy duty uv resistant Polyethylene-Foam block with Caddy® Erristrut channel insert. Lightweight yet strong, non-absorbent & shock absorbing.

Pipe Piers

5558

182400 267 x 102 x 102 29.60

5558

598835 71-74 4.40598836 74-77 4.50598837 77-80 5.15598838 83-86 5.55598839 86-90 5.55598842 96-100 5.55598843 100-103 5.55598844 109-112 6.50598845 112-115 7.05598847 125-128 8.40598849 135-138 8.40598853 138-141 8.75598854 148-151 8.85598855 157-160 9.70598856 160-164 12.45598857 164-167 12.75598858 167-170 12.90598859 176-179 13.00598862 179-182 14.55598863 189-192 15.55598864 196-200 19.35

Beam Clamps

5558

389500 9 - 2.70389510 11 - 3.20389520 13 - 3.65389505 17 - 6.45386810 - M8 2.70386820 - M10 3.75386830 - M12 3.65

Drop in Wedge Anchors

5558

1-9

10+

593180 M6 0.60 0.55593190 M8 0.60 0.55593200 M10 0.70 0.65400415 M12 1.25 1.10400416 M16 1.95 1.85


1299

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics


SPEED LINK Support Systems & Accessories• Universal wire rope fi xing

system, light duty.

SPEED LINK LD

5558

195950 1.5 1 200N 4.60195920 1.5 2 200N 4.65195955 1.5 3 200N 5.70195925 1.5 5 200N 10.55195930 1.5 10 200N 8.60

• Universal wire rope fi xing system offering reduced installation time and effort. No drilling or welding required. Easy height adjustment with hook fi xed to one end of the rope. Electro zinc plated fi nish.

SPEED LINK Packs

5558

195800 2 1 45 4.95195805 2 2 45 5.65195810 2 3 45 6.40195815 2 5 45 7.90195820 2 10 45 10.90195825 3 1 90 5.85195830 3 2 90 7.10195835 3 3 90 7.40195840 3 5 90 9.70195845 3 10 90 13.90

• Stainless Steel version of the Speed link System in 3mm wire.

Stainless Steel SPEED LINK Packs

5558

195831 3 2 90 10.10

• A universal fi xing bracket to accept wire rope or hook, secured with blind rivets or self tapping screws.

Fixing Brackets

5558

1-9

10+

195852/BKT 20 20 12 0.50 0.45

• Edge protection for square ducting, plastic construction with pre-formed wire guides to ensure good wire rope location.

Ducting Edge & Surface Protector

5558

1-9

10+

195851/EDGE 50 52 52 1.00 0.95

• Specifi cally designed for the range to cut 2/3mm wire rope to prevent unravelling. Plastic moulded grips with effi cient mechanism requiring limited force.

Wire Rope Cutters

5558

195853/CUT 51.60

• Universal eye bolt with metric thread to accept wire rope or hook. Hot dip galvanised.

Metric Thread Eye Bolts

5558

1-9

10+

195854/M6X30 6 30 0.70 0.65195856/M8X40 8 40 0.60 0.55

• Universal eye bolt with wood thread to accept wire rope or hook. Hot dip galvanised.

Wood Thread Eye Bolts

5558

1-9

10+

195858/6X50 8.75 60 0.50 0.45

Ring FRF Single Pipe Clip c/w Securing Plug, Box of 100

5558

571130 1 x 14 8 12.35571140 1 x 16 8 14.10571150 1 x 18 8 15.85571160 1 x 20 8 19.40571170 1 x 22 8 20.75571180 1 x 25 8 21.20571190 1 x 28 8 23.00

Ring FRF Double Pipe Clip c/w Securing Plug, Box of 100

5558

571200 2 x 16 8 16.95571210 2 x 18 8 19.40571220 2 x 20 8 19.40571230 2 x 22 8 21.20571240 2 x 25 8 23.00571250 2 x 28 8 30.00

• For securing electrical cables to Speed Link wire rope. Manufactured from spring steel with ERICO coating.

Cable Clip

5558

1-9

10+

195860 14 0.50 0.45195861 18 0.50 0.45

• Self locking clip for recessed or track lighting.

Light Fitting Clip

5558

1-9

10+

195863 0.70 0.65

ERISTRUT Profi le & Accessories• For heavy duty applications

slotted 14 x 27mm every 50mm, pre galvanised (P1) or hot dip galvanised (P3) fi nish.

• 62 x 41 x 2.5mm

Profi le MC

5558

310630 3 P1 104.20310635 6 P1 208.45310640 3 P3 137.30

• For heavy duty applications slotted 14 x 27mm every 50mm, pre galvanised (P1) or hot dip galvanised (P3) fi nish.

• 2 x (62 x 41 x 2.5mm)

Double Profi le MC

5558

310650 6 P1 390.60

Minimum pack quantity of 10 applies to all Profi le lengths.All Profi le lengths are available on a 3-7 working day delivery

service. Specifi ed delivery dates and times cannot be guaranteed. Additional carriage charges may apply,

based on weight and location. Please speak to our Business Development Team

for full details.

A

B C


1300


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Toggle Clamps

Vertical Manual Clamps, Flanged Base

• Vertical clamps are the most popular type of toggle clamp, the arm and handle rotating in the same direction and high clamping force being generated.

• Main components are zinc plated and passivated steel. Rivets are stainless steel, setscrews are chemi-black coated steel.

Page Tech Sheet 1547

Adjustable Arm, T-Handle

0119

BR-V70/2BT 70daN 20.85

Supplied with Setscrew & Nuts, Flanged Washers.

Adjustable Arm

0119

BR-V200/2B 200daN 25.55BR-V250/2B 250daN 24.60BR-V300/2B 300daN 34.15BR-V350/2B 350daN 34.50BR-V450/2B 450daN 54.80

Supplied with Setscrew & Nuts, Neoprene Cover & Flanged Washers.

Adjustable Arm, Neoprene Cover

0119

BR-V75/2B 75daN 17.90BR-V100/2B 100daN 20.65

Fixed Arm, Neoprene Cover

0119

BR-V150/2B 150daN 20.20

Vertical Manual Clamps, Straight Base

Adjustable Arm

0119

BR-V250/1B 250daN 24.60BR-V300/1B 300daN 34.15BR-V350/1B 350daN 34.50BR-V450/1B 450daN 54.80

Supplied with Setscrew & Nuts, Neoprene Cover.

Fixed Arm, Neoprene Cover

0119

BR-V200/1B 150daN 25.55

Vertical Manual Clamps, Front Mounting

Adjustable Arm

0119

BR-V200/3B 200daN 25.55


0119

BR-V100/3B 100daN 20.65

Pull Back Clamp, Flanged Base• This clamp is unique in

having an action similar to a wide-opening locking pliers, but having a fl anged body which can be fastened to the fi xture or mould against which the work-piece or mould half is to be clamped.

• Pressed components are of zinc plated and passivate steel. Rivets are stainless steel.

• Supplied with Setscrew & Nuts.

Fixed Arm

0119

BR-TC79 360daN 47.30

Supplied with 10-32 fl at cushion spindle & 2 TW fl anged washers.

For Push Style Fittings see page 36

Tech Sheet 1560


1301

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Toggle Clamps

Horizontal Manual Clamps, Flanged Base

• Horizontal Clamps are usually used where height restrictions prevent the use of a vertical clamps, or where the action of the clamping arm and handle rotating in opposite directions is more suitable.

• Main components are of zinc plated and passivated steel and rivets are stainless steel.

• Latch Clamps are available in two confi gurations Horizontal with the clamp and latch bracket in the same plane or Vertical where the clamp and the bracket being at right angles to each other.

• All components are of zinc plated and passivated steel. Rivets being stainless steel. With hardened parts and bushes.

Adjustable Arm

0119

BR-H50/2B 50daN 14.80BR-H250/2B 250daN 29.75BR-H350/2B 350daN 41.40BR-H450/2B 450daN 60.80

Supplied with Setscrew & Nuts, Neoprene Cover & Flanged Washers.


0119

BR-H75/2B 75daN 20.10BR-H150/2B 150daN 25.60

Horizontal Manual Clamps, Straight Base

Adjustable Arm

0119

BR-H50/1B 50daN 14.80BR-H350/1B 350daN 41.40BR-H450/1B 450daN 60.80


0119

BR-H150/1B 150daN 25.25

Welders Clip Clamps

0119

BR-CC510 6daN 15daN 11.50BR-CC610 15daN 26daN 15.85BR-CC701 25daN 46daN 17.25

Vertical Latch Clamps, Flanged BaseComplete with Latch Bracket.

0119

BR-LU200V 200daN 27.95BR-LU400V 400daN 32.40BR-LU700V 700daN 53.75

Horizontal Latch Clamps, Flanged Base

0119

BR-LU200H 200daN 27.20BR-LU400H 400daN 39.70BR-LU700H 700daN 66.65

Hook Clamps, Flanged Base• The action of hook clamps in

pulling two parts together makes them suitable for applications such as closing and holding closed doors, lids and moulds etc.

• All components are of zinc plated and passivated steel, the hooks being of high tensile alloy steel.

Complete with Latch Bracket.

0119

BR-LH200 200daN 30.20BR-LH400 400daN 32.40BR-LH700 700daN 53.75

Supplied with Setscrew & Nuts, Flanged Washers.

Tech Sheet 1559

Tech Sheet 1581

Tech Sheet 1582

Tech Sheet 1563


1302


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Sec

tio

n 13

– C

lam

ps

& C

lips

Toggle Clamps

Push-Pull Clamps

• With the exception of the P50, which is a light duty base mounted Push Pull clamps. Nose mounting allows the clamp to be rotated to the required angle and locked by means of the locknut provided.

• Main components are of steel with either a zinc plating and passivated or manganese phosphate fi nish.

Fixed Flange with Bottom or Side Mounting

0119

BR-P50 50daN 17.50

Plunger: Locks at both extended & retracted ends of stroke.Supplied with Setscrew & Nuts Mounting Brackets & Locknut.

Nose or Flange Mounting

0119

BR-P100 100daN 40.75BR-P200 200daN 52.25BR-P250 250daN 36.40BR-P400 400daN 71.40BR-P450 450daN 49.65

Plunger: Locks at both extended & retracted ends of stroke.Supplied with Setscrew & Nuts.

Heavy Duty Body Mounting

0119

BR-P600 600daN 50.70

Clamping Accessories

Plunger: Locks at both extended & retracted ends of stroke.Supplied with Setscrew & Nuts & Neoprene Cover.

Swivel Foot Spindles

0119

BR-MS0535 M5 35 4.40BR-MS0650 M6 50 5.25BR-MS0865 M8 65 6.85

Neoprene Tipped Spindles

0119

BR-NTS0432 M4 32 2.50BR-NTS0538 M5 38 2.90BR-NTS0645 M6 45 3.30BR-NTS0865 M8 63 4.50

Neoprene Covers

0119

BR-NC/04 M11 8 1.00BR-NC/05 M13 10 1.20BR-NC/06 M15 12 1.45BR-NC/08 M19 15 1.70

Tech Sheet 1570

Tech Sheet 1574

Tech Sheet 1579

Tech Sheet 1572

Tech Sheet 1575

Tech Sheet 1578


1303

Sec

tio

n 13

– C

lam

ps

& C

lips


Air Tools


Blow Guns & Vacuum

Sprays &Adhesives

Clamps & Clips


MalleableIron

Stainless Steel

Adaptors& Fittings

Ring MainSystems

Valves


KELM™Pneumatics


PneumaticQRC

HydraulicQRC

Hydraulics

Banding System, Tie Wraps & Lockouts

304 Stainless Steel Banding SystemTo use, take one end of the cut banding and bend back 1/2”. Take a self locking head and slide it the entire length of the band until it reaches the bend. Bend the tail fl at against the bottom of the banding head to complete assembly.

Banding & Tie Wrap Installation ToolsFLO4MT: Hand Operated Tool providing controlled tension and cut off of the excess when the pre-determined tension is reached with the squeeze of the handle. Suitable for use with banding system SBS-... and Tie Wraps STW....FLO2MT: Hand Operated Tool providing controlled tensioning. Flush cut-off is made by twisting of the wrist. Suitable for use with banding system SBS-... and Tie Wraps STW....

0040

FLO4MT Auto Cut Off and Tensioner 1850.85FLO2MT Twist to Cut Off and Tensioner 569.65

304 Stainless Steel Tie Wraps

0040

STW-201L 201 4.6 1.55STW-362L 362 4.6 1.70STW-679L 679 4.6 2.50STW-259H 259 7.9 2.10STW-838H 838 7.9 5.40

Ball Valve LockoutsPlease note: Ball valve lockouts do not come with padlock.

0040

BVL-04RED 1/4” to 1” Red 56.05BVL-20RED 1.1/4” to 3” Red 98.500040

SBS-76L Band 76 4.6 1 177.75SBS-76H Band 76 7.9 1 287.30SBH-L Locking Head - 4.6 100 45.00SBH-H Locking Head - 7.9 100 54.00

Lockout Hasps

0040

LH-16 1” Diameter 6 Padlock Hasp 18.20LH-24 1.5” Diameter 6 Padlock Hasp 21.95

High Security Padlocks

Gate Valve LockoutsPlease note: Gate valve lockouts do not come with padlock.

0040

GVL-16RED 1” to 2.1/2” Red 48.15GVL-40RED 2.1/2” to 6.1/2” Red 100.70

Lockouts Label Dispensers

Labels 1.1/2” x 1” 200 Legends per Dispenser

0040

LDL-RW LOCKOUT Red on White 52.30

Polyamide 6/6 Nylon, Cable TiesResistant to UV, oils, grease, salt (DNV Marine approved) & light acids. UL approved (E97527).

Natural, Pack of 100

0040

GP-025-0100N 2.5 100 0.70GP-025-0200N 2.5 200 1.45GP-036-0140N 3.6 140 1.75GP-036-0200N 3.6 200 2.40GP-036-0300N 3.6 300 3.70GP-048-0120N 4.8 120 4.05GP-048-0160N 4.8 160 2.80GP-048-0200N 4.8 200 3.30GP-048-0300N 4.8 300 5.00GP-048-0368N 4.8 368 6.25GP-076-0200N 7.6 200 6.70GP-076-0240N 7.6 240 8.10GP-076-0300N 7.6 300 9.10GP-076-0368N 7.6 368 11.60GP-090-0430N 9 430 16.90GP-090-0530N 9 530 21.50

Black, Pack of 100

0040

GP-025-0100B 2.5 100 0.70GP-025-0200B 2.5 200 1.45GP-036-0140B 3.6 140 1.75GP-036-0200B 3.6 200 2.40GP-036-0300B 3.6 300 3.70GP-048-0120B 4.8 120 4.05GP-048-0160B 4.8 160 2.80GP-048-0200B 4.8 200 3.30GP-048-0300B 4.8 300 5.00GP-048-0368B 4.8 368 6.25GP-076-0200B 7.6 200 6.70GP-076-0240B 7.6 240 8.10GP-076-0300B 7.6 300 9.10GP-076-0368B 7.6 368 11.60GP-090-0430B 9 430 16.90GP-090-0530B 9 530 21.50

Anodized Colour Coded Aluminium Body

0040

HSP-48BLU 3” Shackle Blue 73.50HSP-48BLK 3” Shackle Black 90.20HSP-16GRN 1” Shackle Green 61.05HSP-48GRN 3” Shackle Green 74.10HSP-16RED 1” Shackle Red 61.05


Documents

Worm Drive Hose Clamps - Tidyco Ltd. · 2017. 4. 10. · HC140-160 140 160 7 2.25 2.15 Screwdriver 5555 HC1 12.60 Cut & Fix Banding, Mild Steel & 304 Stainless Steel Mild Steel, 8mm