Wrkshp1 2012 EUR, Promocion Workshop Booklet 1 DRAPER 2012,

8/2/2019 Wrkshp1 2012 EUR, Promocion Workshop Booklet 1 DRAPER 2012, www.herrapro.es

http://slidepdf.com/reader/full/wrkshp1-2012-eur-promocion-workshop-booklet-1-draper-2012-wwwherraproes 1/120

Draper - first choice for tools inagricultural, industrial andautomotive workshops

NEW Recording Flexi Inspection Camera withSD-HC Memory Card Slot and Camera Probe

special deal!

motorsport sponsorship...Draper Tools sponsor Mark Smithin Prostock Bike drag racing and

are the main tool sponsorat Santa Pod Raceway

€ 215.95from

*TSP EX. VAT

Stock Nos. 05162 & 05163

2 new models with video recordingfacilities, waterproof camerahead (5.5 and 8.8mm)versions illuminatedby variable brightness LED's

See page 32 for more details!



Welcome to the first edition of our Workshop Booklet for2012, which runs from April to 30th September 2012.

J ust some of t he great new l ines i n t his issue...

WeldersSee pages 99-101

for our updatedrange of welders,

suitable for theprofessional

workshop.Welding

accessoriesare available onpages 101-103.

CompressorsThere are ten

new compressorsfeatured, includinglow noise models.

These have areduced noise

pressure of up to

24% compared toan equivalent

compressor. Seepages 104-107.

Shown here are some of our new linesintroduced this year,many of which are

requests from our stockists.Look out for the ‘NEW’logonext to the relevant products throughout this booklet

You're in goodcompany whenyou choosedraper tools...

these twoleadingbusinesses arean example of the thousandswho use ourproducts,supplied byquality Draperdistributors

RAC Patrols use Draper Toolsto carry out their roadside

assistance.

Dave Morris, Chief Aircraft Curator and his colleagues at the Fleet Air Arm Museum in Somerset, use

Draper tools in their ground-breakingrestoration work.

Our increasing collection of

product videos

We have put together a collection of product videos, featuring informationand applications on many productsin the Draper Catalogue.

Alternatively to view all of our latest videos visit:

www.draper.co.uk/videos

draper toolsproduct infochannel

look out for thislogo throughoutthe catalogue

Draper WorkstationThe Workstation is a modularstorage system comprising of a

workbench andwall,drawer &floor cabinetsthat the user canmix-and-matchto their ownconfiguration,making thesystem ideal fornumerousapplications.

See page 80.


http://slidepdf.com/reader/full/wrkshp1-2012-eur-promocion-workshop-booklet-1-draper-2012-wwwherraproes 3/120*Typical Selling Price - may vary in-store. 3

H20VDE

20 PIECE 1/2" Sq. Dr. VDEAPPROVED FULLY INSULATEDMETRIC SOCKET SET• Expert Quality • 11 fully insulated 10-32mm

HI-TORQ metric sockets • 5 fully insulated 4-10mmmetric hexagon socket bits • 4 accessories

• Chrome vanadium steel hardened, tempered andchrome plated • Each component has been tested to1000V AC or 1500V DC for safe live working

• Manufactured to DIN Standard and individuallycertified to EN 60900:2004

1/2" Sq. Dr. VDE APPROVED FULLYINSULATED DRAPER EXPERT HI-TORQ®METRIC VDE SOCKETS

Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex.VAT Inc.VAT

07236 10mm €10.39 €12.78 €6.30 €7.7507251 11mm €10.39 €12.78 €6.30 €7.7507252 12mm €10.39 €12.78 €6.30 €7.7507253 13mm €10.39 €12.78 €6.30 €7.7507237 14mm €10.44 €12.84 €6.35 €7.8107238 17mm €11.04 €13.58 €6.78 €8.3407239 19mm €11.64 €14.32 €6.99 €8.6007240 22mm €13.56 €16.68 €8.20 €10.0907241 24mm €14.04 €17.27 €8.40 €10.3307242 27mm €17.54 €21.58 €10.55 €12.9807243 32mm €21.46 €26.39 €12.99 €15.98

1/2" Sq. Dr. VDE APPROVED FULLY INSULATED METRICHEXAGONAL SOCKET BITS


07234 4mm €14.81 €18.21 €8.99 €11.0607248 5mm €14.81 €18.21 €8.99 €11.0607249 6mm €14.81 €18.21 €8.99 €11.0607250 8mm €14.81 €18.21 €8.99 €11.0607235 10mm €16.06 €19.75 €9.75 €11.99

Stock No.07233

EX. VAT INC VATList Price € 493.18 List Price € 606.61

*TSP € 255.00 *TSP € 313.65Draper Expert HI-TORQ® is a registeredtrademark of Draper Tools Ltd.

tools for hybrid/electric vehicles• Expert Quality • Chrome vanadium steel hardened, tempered and chrome plated • Tested to 1000V AC or 1500V DC for safe live working

• Manufactured to DIN Standard and individually certified to EN 60900:2004

Draper Expert HI-TORQ® is a registered trademark of Draper Tools Ltd.

H70VDE1/2" Sq. Dr. VDE APPROVED FULLYINSULATED SOFT GRIP REVERSIBLERATCHET• Expert Quality • Chrome vanadium steel hardened,

tempered and chrome plated with push button release• Length: 250mm • Each component has been tested to10,000V for safe 1000V AC or 1500V DC live working

• Manufactured to DIN Standard and individually certifiedto EN 60900:2004

Stock No.07247


*TSP € 58.20 *TSP € 71.59

1/2" Sq. Dr. VDE APPROVED FULLY INSULATED EXTENSION BARS• Expert Quality • Chrome vanadium steel hardened, tempered and chrome plated• Fully locking collar and ball mechanism to ensure extension and accessory cannot drop off ratchet• Tested to 1000V AC or 1500V DC for safe live working• Manufactured to DIN Standard and individually certified to EN 60900:2004

Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc.VAT

07244 125mm €45.00 €55.35 €24.90 €30.6307245 250mm €55.61 €68.40 €31.15 €38.31

H71VDE

1/2" SQ. DR. VDE APPROVED FULLYINSULATED TEE BAR• Expert Quality • Chrome vanadium steel hardened,

tempered and chrome plated • Fully locking collar andball mechanism to ensure extensionand accessory cannot drop offratchet • Length: 200mm

• Tested to 1000V AC or 1500V DC forsafe live working

• Manufactured to DIN Standard andindividually certified to EN60900:2004

Stock No.07246


*TSP € 37.15 *TSP € 45.69

New - Tools for Hybrid/Electric vehiclesNew for 2012/13 these products have been introduced to the Draper range as a result of theincreasing numbers of modern high power electric hybrid vehicles that can carry a significantrisk of electrocution.



Draper Expert HI-TORQ® is a registered trademark of Draper Tools Ltd.PZ TYPE products are compatible with *Pozidriv®/Supadriv® fixing systems. *Pozidriv®/Supadriv® areregistered trademarks of Trifast Plc. Draper TX-STAR products are compatible with †Torx fixing systems. †Torx is the registered trademark of Camcar/Textron Inc.

4

Stock No.43638


*TSP € 46.79 *TSP € 57.55

B20M

20 PIECE 1/4" Sq. Dr.METRIC SOCKET SET• Expert Quality • 13 Draper Expert

HI-TORQ MM/AFsockets

• 7 accessories• Suitable for

carrying in toolboxes due to itscompact size

B40AMN

40 PIECE 1/4" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality • 21 Draper Expert HI-

TORQ MM/AF sockets• 7 accessories• Bit holder and 11 bits

Stock No.02349


*TSP € 29.67 *TSP € 36.49

B75AMN75 PIECE 1/4" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality • 37 Draper Expert HI-

TORQ MM/AF sockets• 9 accessoriesincluding low profilereversible ratchet

• Bit holder and28 bits

Stock No.02350


*TSP € 53.25 *TSP € 65.50

VDE Fully Insulated tools forprofessional workshops

B26M/MC

26 PIECE 1/4" Sq. Dr. METRICSOCKET SET IN METAL CASE• Expert Quality • 20 Draper Expert

HI-TORQ 6 pointsockets withknurled ring forextra grip

• 6 accessories

Stock No.43675


*TSP € 38.01 *TSP € 46.75

Stock No.33611


*TSP € 25.20 *TSP € 31.00

B37M/ZIP37 PIECE 1/4" Sq. Dr. METRICSOCKET AND SOCKET BIT SETIN ZIP CASE• Expert Quality

• 9 Draper Expert HI-TORQ sockets withknurled ring for extragrip

• 21 assorted socketbits

• 7 accessories

VDESET1

10 PIECE VDE APPROVED FULLYINSULATED PLIERS ANDSCREWDRIVERS SET• Expert Quality

• Contents: Combination Pliers, Long Nose Pliers,Diagonal Side Cutters, 3 plain slot screwdrivers, 2cross slot screwdrivers and 2 PZ TYPE screwdrivers

• Fully insulated handle and blade sheath for total safety(screwdrivers)

• Tested to 10kV, suitable for working on live circuits of1kV AC and 1.5kV DC

• Conforms to EN 60900:2004, DIN 7437 and 7438• Chrome vanadium steel blades hardened, tempered

and chemically blacked

Stock No.71155


*TSP € 57.00 *TSP € 70.11PZ TYPE products are compatible with*Pozidriv®/Supadriv® fixing systems.*Pozidriv®/Supadriv® are registeredtrademarks of Trifast Plc.

87 28KNIPEX 250mm FULLY INSULATED‘COBRA’ WATERPUMP PLIERS• Expert Quality • Tested to EN60900 for use on live conductors up

to 1kV (AC) and 1.5kV (DC)• ‘No-nip’ feature prevents handles locking

together and damagingusers’ hands

• 25 position adjustment

Stock No.10644


*TSP € 44.50 *TSP € 54.7403 08KNIPEX 180mm FULLYINSULATEDCOMBINATION PLIERS• Expert Quality • Tested to EN 60900:2004 for use on

live conductors up to 1kV (AC) and1.5kV (DC)

Stock No.31918


*TSP € 21.54 *TSP € 26.50



B47MDSN

47 PIECE 1/4" Sq. Dr. METRIC 12POINT DRAPER EXPERT MULTI-DRIVE® SOCKET SET• Expert Quality • 13 Draper Expert Multi-

Drive® sockets• Sockets are multi-drive,

which allows them tobe used with hexagon,bi-hexagon (metricand AF) and DraperTX-STAR fixings

• 11 accessoriesincluding lowprofile reversibleratchet


Stock No.02351


*TSP € 35.40 *TSP € 43.54

D18MN18 PIECE 3/8" Sq. Dr. METRICSOCKET SET• Expert Quality • 11 Draper Expert HI-

TORQ MM/AF sockets• 4 accessories

Stock No.02367


*TSP € 29.99 *TSP € 36.89

D25M/MC

25 PIECE 3/8" Sq. Dr. METRICSOCKET SET IN METAL CASE• Expert Quality • 17 Draper Expert HI-TORQ

6 point sockets• 2 Draper Expert HI-TORQ

6 point spark plugsockets

• 6 accessories

Stock No.43646


*TSP € 53.01 *TSP € 65.20.

D33MN33 PIECE 3/8" Sq. Dr. METRICSOCKET SET• Expert Quality • 15 Draper Expert HI-

TORQ metric sockets• 11 Draper Expert HI-

TORQ metric deepsockets

• 2 Draper Expert HI-TORQ spark plugsockets 10 and14mm

• 5 accessories

Stock No.02352


*TSP € 48.60 *TSP € 59.78

D35M/ZIPN35 PIECE 3/8" Sq. Dr. MM/AFSOCKET SET IN ZIP CASE

• Expert Quality • 27 Draper Expert HI-TORQ 12 point socketswith knurled ring forextra grip

• Spark plug socket10mm

• 7 accessories

Stock No.02366


*TSP € 52.20 *TSP € 64.21

D40AMN40 PIECE 3/8" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality • 25 Draper Expert HI-

TORQ metric sockets• 4 Draper Expert HI-

TORQ metric deepsockets

• 3 Draper Expert HI-TORQ spark plugsockets

• 8 accessoriesincluding low profilereversible ratchet

Stock No.02353


*TSP € 56.50 *TSP € 69.50

D42MDSN42 PIECE 3/8" Sq. Dr. METRIC 12POINT DRAPER EXPERT MULTI-

DRIVE® SOCKET SET• Expert Quality • 26 Draper Expert Multi-

Drive® sockets• 2 Draper Expert HI-TORQ

spark plug sockets 10and 14mm

• Sockets are multi-drive,which allows them to beused with hexagon, bi-hexagon (metric andAF) and Draper TX-STAR fixings

• 6 accessoriesincluding low profilereversible ratchet


Stock No.02354


*TSP € 67.98 *TSP € 83.62

H25AMN25 PIECE 1/2" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality • 17 Draper Expert HI-TORQ

MM/AF sockets• 3 Draper Expert HI-TORQ

spark plug sockets 10-14mm

• 5 accessories

Stock No.02356


*TSP € 53.50 *TSP € 65.81

super toughsocket sets forprofessionalworkshopsTo ensure durability in even the

most demanding environments,allthese socket sets are manufacturedfrom hardened and temperedchrome vanadium steel.To protectagainst corrosion,each set ischrome plated with a satin and/orpolished finish.



H30MN30 PIECE 1/2"Sq. Dr. METRICSOCKET SET• Expert Quality • 23 Draper Expert

HI-TORQ metricsockets

• 3 Draper ExpertHI-TORQ sparkplug sockets

• 4 accessories

Stock No.02357


*TSP € 61.80 *TSP € 76.01

H31M/MC31 PIECE 1/2" Sq. Dr. METRICSOCKET SET IN METAL CASE• Expert Quality • 23 Draper Expert HI-TORQ MM/AF sockets• 3 Draper Expert HI-TORQ spark plug sockets• 5 accessories

Stock No.43647


*TSP € 89.60 *TSP € 110.21

H42AM/MC

41 PIECE 1/2" Sq. Dr. MM/AFCOMBINED SOCKET SET INMETAL CASE• Expert Quality • 32 Draper Expert

HI-TORQ MM/AFsockets

• 3 Draper Expert HI-TORQ spark plugsockets 10-14mm

• 6 accessories

Stock No.43636


*TSP € 97.28 *TSP € 119.65

H61AMN61 PIECE 1/2" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality • 36 Draper Expert HI-

TORQ MM/AF sockets• 15 Draper Expert HI-

TORQ MM/AF deepsockets

• 3 Draper Expert HI-TORQ spark plugsockets 10-14mm

• 7 accessories

including lowprofile ratchet

Stock No.02360


*TSP € 116.70 *TSP € 143.54

H60MDSN60 PIECE 1/2" Sq. Dr. METRIC 12POINT DRAPER EXPERT MULTI-DRIVE® SOCKET SET• Expert Quality • 26 Draper Expert

Multi-Drive®sockets • 2 DraperExpert HI-TORQspark plug sockets10 and 14mm

• Sockets are multi-drive, which allowsthem to be usedwith hexagon,(metric and AF)and Draper TX-

STAR fixings.• Bit holder and

25 bits

Stock No.02361


*TSP € 97.50 *TSP € 119.93

T26AMN26 PIECE 3/4" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality • 21 x MM/AF

sockets• 5 accessories

Stock No.02362


*TSP € 189.60 *TSP € 233.21

MC17M17 PIECE 3/4" Sq. Dr. METRICSOCKET SET WITH EXTENDABLERATCHET• Expert Quality • 12 metric sockets• 5 accessories

Stock No.02578


*TSP € 193.80 *TSP € 238.37

SD26AMA

26 PIECE 3/4"Sq. Dr.MM/AF

COMBINEDSOCKET SET• Silverdrive®

socket set• 11 metric

sockets• 10 AF sockets• 5 accessories

Stock No.89029


*TSP € 121.94 *TSP € 149.99

Draper Expert HI-TORQ® is a registered trademark of Draper Tools Ltd.PZ TYPE products are compatible with *Pozidriv®/Supadriv® fixing systems. *Pozidriv®/Supadriv® areregistered trademarks of Trifast Plc. Draper TX-STAR products are compatible with †Torx fixing systems. †Torx is the registered trademark of Camcar/Textron Inc.

...socket sets



vortexa different typeof socket set

*Typical Selling Price - may vary in-store. 7

MC22M22 PIECE 1" Sq. Dr. METRICSOCKET SET• 17 metric sockets• 5 accessories• Health and safety information: This set is a heavy

item; requires two people to lift

Stock No.02579


*TSP € 478.80 *TSP € 588.92

STK150N149 PIECE 1/4, 3/8, 1/2" Sq. Dr.METRIC SOCKET AND SOCKETBIT SET• Expert Quality 1/4" sq. drive• 20 Draper Expert HI-TORQ sockets• 5 Draper TX-STAR sockets• 30 assorted socket bits3/8" sq. drive• 17 Draper Expert HI-TORQ sockets• 5 Draper TX-STAR sockets• 4 accessories1/2" sq. drive• 24 Draper Expert HI-TORQ sockets• 3 Draper TX-STAR sockets• 5 accessories

Bit and Tools• 24 popular 5/16" hex. insert bits• 7 hexagon keys 1.5 - 4.0mm

Stock No.02363


*TSP € 162.00 *TSP € 199.26

TK114N114 PIECE 1/4, 3/8" Sq. Dr. TOOL KIT• Expert Quality •1/4" sq. drive

• 32 Draper Expert HI-TORQ MM/AF sockets• 7 accessories3/8" sq. drive• 35 Draper Expert HI-TORQ MM/AF sockets• 2 Draper Expert HI-TORQ metric spark plug

sockets 10 and 14mm• 4 accessoriesBit and Tools• 24 popular insert bits• 10 metric combination wrenches 8-19mm

Stock No.02364


*TSP € 107.40 *TSP € 132.10

TK150N

150 PIECE 1/4, 3/8, 1/2" Sq. Dr.TOOL KIT• Expert Quality 1/4" sq. drive• 32 Draper Expert HI-TORQ MM/AF sockets• 4 accessories 3/8" sq. drive• 43 Draper Expert HI-TORQ MM/AF sockets• 6 accessories 1/2" sq. drive• 25 Draper Expert HI-TORQ MM/AF sockets• 2 Draper Expert HI-TORQ spark plug sockets

10 and 14mm• 4 accessories Bit and Tools• 24 popular insert bits

• 10 metric combination wrenches 8-19mm

Stock No.02365


*TSP € 174.00 *TSP € 214.02

VTX71AM

71 PIECE 20MM DRAPER EXPERTVORTEX GEAR-RATCHET, 1/4, 3/8"Sq. Dr. MM/AF COMBINEDSOCKET SET• Expert Quality • 17 x 20mm MM an AF Vortex sockets and4 accessories • 18 x 1/4" MM and AF sockets and 2 accessories• 19 x 3/8" MM and AF sockets, and 2 accessories • 9 x 1/4" bits• Set generally covers sizes 4-19mm and 5/32"-13/16"AF

Stock No.71244


*TSP € 74.80 *TSP € 92.00

Draper Expert Vortex - therevolutionary socket system...The unique hollow socket technology of theDraper Expert VORTEX ratchet and sockets isideal for long fixings.The sockets areedge driven.This allows a fixing topass through the head and avoidthe depth restriction of conventional socketsand ratchets.



VTX38MM

38 PIECE 13MM and 30MMMETRIC DRAPER EXPERT VORTEXGEAR-RATCHET SOCKET SET• Expert Quality • 14 x 20mm metric Vortex sockets and 5 accessories• 14 x 30mm metric Vortex sockets and 5 accessories

Stock No.40174


*TSP € 125.99 *TSP € 154.97

B10M/6PT

10 PIECE SET OF 1/4"Sq. Dr. 6 POINT DRAPEREXPERT HI-TORQ®METRIC SATIN CHROME

SOCKETS• Expert Quality • Contents: 5-14mm• Knurled ring for extra grip• Hanging rail length: 255mm

Stock No.48850


*TSP € 9.00 *TSP € 11.07

B10MD/6PT

10 PIECE SET OF 1/4"Sq. Dr. 6 POINT DEEPDRAPER EXPERT HI-TORQ® METRIC SATIN

CHROME SOCKETS• Expert Quality • Contents: 4-13mm• Knurled ring for extra grip• Hanging rail length: 260mm

Stock No.48851


*TSP € 14.95 *TSP € 18.39D9M/6PT9 PIECE SET OF 3/8" Sq.Dr. 6 POINT DRAPEREXPERT HI-TORQ® SATINCHROME METRICSOCKETS• Expert Quality • Contents: 10-18mm• Knurled ring for extra grip• Hanging rail length: 300mm

Stock No.48852


*TSP € 11.30 *TSP € 13.90

H10M/6PT

10 PIECE SET OF 1/2"Sq. Dr. 6 POINT DRAPEREXPERT HI-TORQ®SATIN CHROMEMETRIC SOCKETS• Expert Quality • Contents: 9-19mm• Knurled ring for extra grip• Hanging rail length: 355mm

Stock No.48854

EX. VATList Price € 24.74

*TSP € 15.60INC VAT

List Price € 30.44

*TSP € 19.19

BHT10AM

10 PIECE SET OF 1/4" Sq. Dr. MM/AFCOMBINED DEEP DRAPER EXPERT

HI-TORQ® SOCKETS• Expert Quality • Contents: 6, 8, 10, 11, 13mm and 1/4, 5/16, 3/8, 7/16 1/2"

AF• Socket bar length: 160mm

Stock No.12705


*TSP € 11.50 *TSP € 14.15Draper Expert HI-TORQ® is a registered trademark ofDraper Tools Ltd.


Multi-Drive® Sockets withknurled ring for extra grip

D9MD/6PT9 PIECE SET OF 3/8"Sq. Dr. 6 POINT DEEPDRAPER EXPERT HI-TORQ® SATIN CHROMEMETRIC SOCKETS• Expert Quality • Contents: 10-19mm• Knurled ring for extra grip• Hanging rail length: 340mm

Stock No.48853


*TSP € 17.60 *TSP € 21.65

H6MD/6PT

6 PIECE SET OF 1/2"

Sq. Dr. 6 POINT DEEPDRAPER EXPERT HI-TORQ® SATINCHROME METRICSOCKETS• Expert Quality • Contents: 13-18mm• Knurled ring for extra grip• Hanging rail length: 295mm

Stock No.48855


*TSP € 17.99 *TSP € 22.13



SOCKET RETAINING BARS WITH 13 CLIPS• Expert Quality • Can be securely fixed to wall

or used in tool box• Tough composite plastic

Stock Drive List Price List Price *TSP *TSPNo. Size Length ex. VAT Inc. VAT ex. VAT Inc.VAT

06520 1/4" 230mm €8.40 €10.33 €5.95 €7.3206521 3/8" 300mm €9.29 €11.42 €6.60 €8.1206522 1/2" 380mm €13.49 €16.59 €9.00 €11.07

ST801/4", 3/8", 1/2" Sq. Dr. SOCKET CARRIER• Contents:1 bar for 20 x 1/4" square drive sockets; 1 bar for 20 x 3/8" square drive

sockets; 1 bar for 20 x 1/2" square drive sockets; 1 bar for 10 x 3/8" and 10 x 1/2"square drive sockets

• Carrier size 430 x 150mm

Stock No.07032


*TSP € 16.75 *TSP € 20.60

EXTRA LONG QUICK RELEASE SOFTGRIP RATCHETS

• Expert Quality • Fine 48 tooth ratchet• Quick release push button• Chrome vanadium steel hardened, tempered, satin chrome

plated for corrosion protection

Stock List Pr ice List Pr ice *TSP *TSPNo. Size Length ex. VAT Inc. VAT ex. VAT Inc.VAT

02593 1/4" 225mm €47.50 €58.42 €25.20 €31.0002594 3/8" 305mm €50.88 €62.58 €26.99 €33.2002595 1/2" 385mm €61.06 €75.10 €31.50 €38.75


34357 1/4" 140mm €31.13 €38.29 €18.50 €22.7633066 3/8" 200mm €38.86 €47.79 €20.99 €25.8234398 1/2" 246mm €50.42 €62.02 €28.99 €35.66

LOW PROFILE 60 TOOTH SOFTGRIP RATCHETS

• Expert Quality • Low profile head thickness: 12mm• Quick release push button

• Forward/reverse selector• Chrome vanadium steel hardened, tempered,

satin chrome plated for corrosion protection


02599 1/4" 150mm €36.65 €45.08 €19.80 €24.3502600 3/8" 220mm €40.68 €50.04 €21.60 €26.5702601 1/2" 275mm €52.25 €64.27 €29.40 €36.16

FLEXIBLE HANDLES

• Expert Quality • Chrome vanadium steel hardened, tempered,

chrome plated and polished


26870 1/4" 130mm €9.53 €11.72 €6.20 €7.6368791 3/8" 200mm €17.30 €21.28 €11.10 €13.6527523 1/2" 250mm €21.91 €26.95 €13.95 €17.1675843 1/2" 375mm €24.24 €29.82 €14.85 €18.2733596 1/2" 600mm €35.76 €43.98 €19.15 €23.55

H24F1/2" Sq. Dr. 600mm FLEXIBLE HANDLE• Expert Quality • Specially designed hinged joint head for extra torque• Chrome vanadium steel hardened, tempered, chrome plated and polished

Stock No.07188EX. VAT INC VAT

List Price € 35.76 List Price € 43.98

*TSP € 19.15 *TSP € 23.55

Quick Release

& Reversible Ratchets

QUICK RELEASE RATCHETS

• Expert Quality • Fine 45 tooth ratchet

• Quick release push button• Forward/reverse selector• Chrome vanadium steel hardened, tempered,

chrome plated and polished



D10MM

10 PIECE SET OF 3/8" Sq. Dr.DRAPER EXPERT HI-TORQ®

METRIC SOCKETS• Expert Quality • Contents: 8, 9, 10, 11, 12, 13, 14, 15, 17 and 19mm• Socket bar length: 210mm

Stock No.19070

EX. VAT INC VAT


*TSP € 11.75 *TSP € 14.45

D8M

8 PIECE SET OF 3/8" Sq. Dr. DEEPDRAPER EXPERT HI-TORQ® METRICSOCKETS• Expert Quality • Contents: 10, 11, 12, 13, 14, 15, 17 and 19mm• Socket bar length: 200mm

Stock No.73182


*TSP € 13.15 *TSP € 16.17

D9M/BNR9 piece 3/8" Sq. Dr. NUT AND BOLTREMOVER SET• Expert Quality • Contents: 8, 10, 11, 12, 13, 14, 15, 17 and 18mm• For the removal of damaged, painted over, rounded off

and rusted bolts• Special flutes lock on to the workpiece for easy removal• Chrome molybdenum steel hardened and

tempered with satin chrome finish

Stock No.05722


*TSP € 28.20 *TSP € 34.69

H23M

23 PIECE SET OF 1/2" Sq. Dr.DRAPER EXPERT HI-TORQ®

METRIC SOCKETS• Expert Quality • Contents: 8 - 32, 30 and 32mm• Manufactured from chrome vanadium steel, hardened,

tempered, chrome plated and polished for corrosionprotection

Stock No.30751

EX. VAT INC VAT


*TSP € 34.20 *TSP € 42.07

MH30

30 PIECE 1/2" Sq. Dr. HEXAGONALSOCKET BIT SET• Expert Quality • Contents: 9 hexagonal socket bits

5-19 x 55mm long; 8 hexagonal socket bits 5-13 x100mm long; 7 hexagonal socket bits 5-14 x 140mmlong; 6 hexagonal socket bits 5-12 x 200mm long

• Sockets forged from chrome vanadium steel hardenedand tempered

• Bits from S2 steel with a chemically blacked finish forcorrosion protection

• Sockets have a half polished and half satin chromefinish

• Groove and two holes for retaining ring and pin

Stock No.04278


*TSP € 86.70 *TSP € 106.64


All these sockets are manufactured from chrome vanadium steelhardened,tempered and chrome plated for corrosion protection.

HI-Torq® Sockets

HT10M

10 PIECE SET OF 1/2" Sq. Dr.DRAPER EXPERT HI-TORQ® METRICDEEP SOCKETS• Expert Quality • Contents: 10, 12, 13, 14, 16, 17, 19, 20, 22 and 24mm• Chrome vanadium steel hardened, tempered, chrome

plated and polished

Stock No.12686


*TSP € 35.95 *TSP € 44.22

10



WBB/44 PIECE 1/4" Sq. Dr. WOBBLEEXTENSION BAR SET• Expert Quality • Contents: 50, 100, 150 and 250mm long• Allows sockets to be driven at up to 15° off vertical• Chrome vanadium steel hardened, tempered, chrome plated

and polished• Spring-loaded ball bearing end is flexible which allows bar to swivel foreasier access to difficult locations

Stock No.57074


*TSP€

11.15 *TSP€

13.71

WBD/5

5 PIECE 3/8" Sq. Dr. WOBBLEEXTENSION BAR SET• Expert Quality • Contents: 45, 75, 150, 250 and 450mm• Allows sockets to be driven at up to 15° off vertical• Chrome vanadium steel hardened, tempered, chrome

plated and polished• Spring-loaded ball bearing for secure socket holding

Stock No.19798


*TSP € 22.20 *TSP € 27.31

WBH/4

4 PIECE 1/2" Sq. Dr. WOBBLEEXTENSION BAR SET• Expert Quality • Contents: 50, 125, 250 and 500mm• Allows sockets to be driven at up to 15° off vertical• Chrome vanadium steel hardened, tempered, chrome

plated and polished• Spring-loaded ball bearing for secure socket holding

Stock No.19799


*TSP € 23.15 *TSP € 28.47

WB9

9 PIECE 1/4, 3/8, 1/2" Sq. Dr. WOBBLE EXTENSION BAR SET• Expert Quality • Contents: 3 x 1/4" sq. dr; 4 x 3/8" sq. dr. and 2 x 1/2" sq. dr. bar lengths• Allows sockets to be driven at up to 15° off vertical

• Chrome vanadium steel hardened, tempered, chrome plated and polished• Spring-loaded ball bearing for secure socket holding

Stock No.32997


*TSP € 26.65 *TSP € 32.78

Wobble Extension Bar Sets

Wobble extension bars are very useful in locations whereaccess to the work area is obstructed or difficult.

The wobble extension bar is fitted into the accessory e.g.a socket, and the user can turn it at an offset angle of upto 15° - see illustration.

15°

D67ABC3 PIECE SOCKET CONVERTER SET

• Expert Quality • Three piece set covering all connections between 1/4",3/8" and 1/2" square drives

• Chrome vanadium steel hardened, tempered, chromeplated and polished for corrosion protection

Stock No.34962


*TSP € 7.45 *TSP € 9.16

4404

7 PIECE 3/8" Sq. Dr. DRAPER

TX-STAR BIT SET• Expert Quality • Bit holder 8mm x 3/8" sq. drive• 6 x Draper TX-STAR bits: T20, T25, T30, T40, T45 and

T50 x 30mm long

Stock No.12793


*TSP € 6.20 *TSP € 7.63

Stock No.12200


*TSP € 7.45 *TSP € 9.16

3404A

8 PIECE 1/2" Sq. Dr. DRAPER TX-

STAR BIT SET• Expert Quality • 6 Draper TX-STAR bits: T20, T25, T30, T40,

T45 and T50 x 30mm long, 1 Draper TX-STAR bit T55 x 75mm long and bit holder10mm x 1/2" sq drive



TXT953/1111 PIECE MECHANICS PATTERNDRAPER TX-STAR SECURITYDRIVER SET• Contents: T6T, T7T, T8T, T9T, T10T, T15T, T20T, T25T,

T27T, T30T and T40T• Square matt

black handlesmanufacturedfrom highimpactresistant plastic

• Satin chromeplated chromevanadium steelblades hardenedtempered withsand blastedtips

Stock No.53515


*TSP € 23.98 *TSP € 29.50

TTX/SG/88 PIECE SOFT GRIP ‘T’ HANDLEDRAPER TX-STAR KEY SET• Expert Quality • Contents: T9, T10, T15, T20 and T25 long leg

100mm x short leg 13mm; T27, T30 and T40 longleg 135mm x short leg 15mm

• Conventional Draper TX-STARend on the long arm andtamperproof Draper TX-STARend on the short arm

Stock No.08376


*TSP € 27.50 *TSP € 33.83

TXTB99 PIECE DRAPER TX-STAR BALLEND KEY SET• Contents: T10, T15, T20, T25, T27, T30,

T40, T45 and T50• Ball end on the long arm and

conventional ends on the short arm• The ball end hexagon tip allows the

hexagon key to be used up to 15°from the screwhead recess

• Held in plastic storage holderwith belt clip

Stock No.73035


*TSP € 21.00 *TSP € 25.83

BDH14TX

14 PIECE SET OF 1/4, 3/8, 1/2" Sq. Dr.DRAPER TX-STAR SOCKETS• Expert Quality • Contents: 1/4" sq dr E4-E8, 3/8" sq dr E10-E14 and 1/2"

sq dr E16-E24• Manufactured from chrome vanadium steel, hardened,

tempered with satinized finish• Bar length: 320mm

Stock No.35381


*TSP € 19.80 *TSP € 24.35

TX5T/77 PIECE 1/4" Sq. Dr. FIVE LOBEDRAPER TX-STAR SECURITY SOCKET

BIT SET• Expert Quality • Contents: TX10, TX15, TX20,

TX25, TX27, TX30 and TX40• S2 silicon steel bit• Chrome vanadium steel hardened,

tempered and chrome plated socket• Bar length: 125mm

Stock No.71394


*TSP € 8.65 *TSP € 10.64

T-TX/4/SET

4 PIECE SET OF 1/2" Sq. Dr.DRAPER TX-STAR SOCKET BITS

• Expert Quality • Contents: T40, T45, T55 and T70socket bits 100mm long

• Bar length: 125mm long

Stock No.73730


*TSP € 16.75 *TSP € 20.60

†Torx is the registered trademark of Camcar/Textron Inc. Draper TX-STAR products are compatible with †Torx fixing systems. †Torx is the registered trademark of Camcar/Textron Inc.

PS14077 PIECE DRAPER

TX-STAR PRECISIONDRIVER SET• Expert Quality • Contents:T6, T7, T8,

T9, T10, T15 and T20• Hardened and tempered SNCM steel

blades, satin chrome plated with blacktips • Coloured nylon handles withrevolving tops

Stock No.50580


*TSP € 11.15 *TSP € 13.71

Compatibility of “Draper

TX-STAR" and Torx†

The “Draper TX-STAR" profile is totally compatible

with the Torx† fixing system. Users of “Draper

TX-STAR" products need have no fear

concerning compatibility.

All “Draper TX-STAR" products have been

thoroughly tested as to their compatibility.

DraperTX-STARproducts



410/8/TX

8 PIECE 1/2" Sq. Dr. IMPACT DRAPERTX-STAR SOCKET BIT SET• Expert Quality • Contents: T30-T80 Draper TX-STAR impact bits x

78mm long• Chrome molybdenum steel hardened and tempered

with a black phosphate finish for corrosion protection

Stock No.60474


*TSP € 44.40 *TSP € 54.61

415/5/TX-STAR

8 PIECE 1/2" SQ. DR. WOBBLEIMPACT DRAPER TX-STARSOCKET BIT SET• Expert Quality • Contents: T30, T40, T45, T50, T55, T60, T70 and T80• Hexagonal bit wobble feature allows bit to swivel 20°

for work in restricted areas• Chrome molybdenum steel hardened and tempered

Stock No.24002


*TSP € 46.99 *TSP € 57.80

T-TX3232 PIECE 1/2" Sq. Dr. DRAPER TX-STAR SOCKET BIT SET•Expert Quality • Contents: 10 Draper TX-STAR socket bits T20-T70 x 55mm long; 10 Draper TX-STAR socket bits T20-T70 x 100mm

long; 6 Draper TX-STAR socket bits T40-T70 x 140mm long; 6 Draper TX-STAR socket bits T40-T70 x 200mm long• Sockets forged from chrome vanadium steel hardened and tempered • Bits from S2 steel with a chemically blacked

finish for corrosion protection • Sockets have a half polished and half satinchrome finish • Groove and two holes for retaining ring and pin

Stock No.04277


*TSP € 88.40 *TSP € 108.73

ITS6

6 PIECE 3/4" Sq. Dr.IMPACT SOCKET ANDDRAPER TX-STAR BITS SET• Expert Quality • Contents: Impact socket bit holder 3/4"

sq. dr x 22mm hex.; 4 Draper TX-STARimpact bitssize: T70,T80, T90and T100;hexagon key

• Bit holders has balland groove for ringsand pins • Chromemolybdenumhardened andtempered andchemically blackedfor corrosionprotection

Stock No.04298


*TSP € 67.95 *TSP € 83.58

RIBE/7/SET

7 PIECE SET OF 3/8, 1/2" Sq. Dr.RIBE™ SOCKET BITS ONSOCKET RAIL• Expert Quality • Contents: 3/8" sq.drive. M6-M10,

1/2" sq.drive. M12-M14 • Chrome vanadium steelsockets • Suitable for use on Fiat, Lancia, Alfa-Romeoand many other applications

Stock No.67065


*TSP € 16.75 *TSP € 20.60

MH40/SC

40 PIECE 3/8, 1/2" Sq. Dr.MECHANICS BIT SET• Expert Quality • Contents: 2 bit holders, 14 Draper

TX-STAR, 14 hexagonal and 10 XZN spline bits• Insert bits and bit holders manufactured from good

quality steel

Stock No.21932


*TSP € 28.75 *TSP € 35.36

408

1/2" Sq. Dr. HEAVY DUTYSTUD EXTRACTOR• Expert Quality • Capacity 6 -19mm

Stock No.14156


*TSP € 14.85 *TSP € 18.27

SES

4 PIECE 1/2" Sq. Dr. STUDEXTRACTOR SET• Roller type with 21mm hexagon on end of socket• Unscrews both left and right hand threads• Contents: 6, 8, 10 and 12mm

Stock No.55641


*TSP € 27.60 *TSP € 33.95



Extending Rachets/Handles

409/18/MM18 PIECE 3/8" Sq. Dr. DRAPER EXPERT HI-TORQ®METRIC IMPACT SOCKET SET• Expert Quality • 14 impact metric sockets • 4 accessories

Stock No.54714


*TSP € 32.15 *TSP € 39.54

410/19/MM19 PIECE 1/2" Sq. Dr. DRAPER EXPERT HI-TORQ®METRIC IMPACT SOCKET SET• Expert Quality • 14 metric impact sockets • 5 accessories

410D/15/MM

15 PIECE 1/2" Sq. Dr. DRAPER EXPERT HI-TORQ®METRIC DEEP IMPACT SOCKET SET• Expert Quality • Contents: sockets size: 10, 12, 13, 15, 16, 17, 18, 19, 21, 22, 24

and 27mm • 3 accessories

Stock No.54650


*TSP € 66.75 *TSP € 82.10

Stock No.37847


*TSP € 50.00 *TSP € 61.50

14

T343/4" Sq. Dr. EXTENDINGFLEXIBLE HANDLE• Expert Quality • Head and shaft manufactured from

chrome vanadium steel hardened, tempered and chromefinish for corrosion protection • 180° hinged joint head

• Pull back collar with knurled ring allows handle to extendfrom 460 (minimum) to 730mm (maximum) • Extendinghandle locks in three positions

T35

3/4" Sq. Dr. EXTENDING OFFSET HANDLE• Expert Quality • Head and shaft manufactured from

chrome vanadium steel hardened, tempered and chromefinish for corrosion protection • Head offset at 90° • Pullback collar with knurled ring allows handle to extend from480 (minimum) to 750mm (maximum) • Extending handlelocks in three positions

Stock No.30835


*TSP € 46.80 *TSP € 57.56

T153/4" Sq. Dr. EXTENDINGREVERSIBLE RATCHET• Expert Quality • Chrome vanadium

steel hardened, tempered, chromeplated for corrosion protection • 48 tooth ratchet • Push buttonto allow handle to extend from 515 (minimum) to 815mm(maximum)

515-815mm

480-750mm

Impact SocketsTake a look at a selection of our full range of impact sockets, made from chrome vanadium steel

hardened and tempered and chemically blacked for corrosion protection.410D/11/MM11 PIECE 1/2" Sq. Dr. DRAPER EXPERT HI-TORQ®METRIC DEEP IMPACT SOCKET SET• Expert Quality • Contents: 15, 16, 17, 18, 19, 21, 22, 24, 27, 30 and 32mm

(6 point 78mm long)

Draper Expert HI-TORQ® is a registered trademark of Draper Tools Ltd.Draper TX-STAR products are compatible with †Torx fixing systems †Torx is the registered trademark of Camcar/Textron Inc.

Stock No.54651


*TSP € 63.00 *TSP € 77.49

Stock No.03067


*TSP € 63.50 *TSP € 78.11

Stock No.30836


*TSP € 54.45 *TSP € 66.97

460-730mm

Look out for our new expanded range of impact socketry on pages46-50 of 2012/13 Draper Tools Catalogue. The range now includes1/4",3/8",1/2",3/4" & 1" Sq. Dr. socketry and accessories.



410/8/HEX

8 PIECE 1/2" Sq. Dr. IMPACTHEXAGONAL SOCKET BIT SET• Expert Quality • Contents: 5-19mm impact

hexagonal bits x 78mm long• Chrome molybdenum steel hardened, tempered and

chemically blacked for corrosion protection

Stock No.26439


*TSP € 45.15 *TSP € 55.53

415/5/HEX

8 PIECE 1/2" SQ. DR. WOBBLE IMPACTHEXAGONAL SOCKET BIT SET• Expert Quality • Contents: 5, 6, 7, 8, 10, 12, 14, and

17mm socket bits • Hexagonal bit wobble featureallows bit to swivel 20° for work in restricted areas

• Chrome molybdenum steel hardened and temperedallows bit to swivel 20° for work in restricted areas

Stock No.23999


*TSP € 46.99 *TSP € 57.80

IBS1616 PIECE 3/4", 1" Sq. Dr. IMPACTSOCKETS AND BITS SET• Expert Quality • Contents: Impact socket bit

holder 3/4" sq. dr x 22mm hex. • Impact socket bitholder 1" sq. dr x 22mm hex. • 5 Draper TX-STARimpact bits size: T60, T70, T80, T90 and T100 • 4hexagonal impact bits size: 17, 19, 22 and 24mm• 4 Draper TX-STAR impact sockets size: E18, E20,E22 and E24 • Hexagon key (4mm)

Stock No.04269


*TSP € 114.90 *TSP € 141.33

LSS7

7 PIECE 3/8, 1/2" Sq. Dr. ‘LAMBDA’OR OXYGEN SENSOR SOCKET SET• Expert Quality • For removal, inspection or replacement of heated and

non-heated oxygen sensors fitted to the followingvehicle marques; Audi, BMW, Citroën, Mercedes,Peugeot, Renault, Skoda, Vauxhall/Opel (GM) andVolkswagen

• Cut-awaysections allowsome sockets tofit over wiring

harnesses• Selection of3/8 and 1/2"‘Lambda’specificsockets

Stock No.89765


*TSP € 48.60 *TSP € 59.78

DIS4

4 PIECE 1/2" Sq. Dr. DIESELINJECTOR SOCKET SET• Expert Quality • Contents: 22mm x 110mm long

hexagon socket; 22mm x 80mm long bi-hexagonsocket; 27mm x 78mm long bi-hexagon socket; 28mmx 80mm long bi-hexagon socket with side windows

• Chrome molybdenum steel hardened and tempered withblack phosphate finish

• Suitable for diesel injectors fitted to Alfa Romeo, Audi,BMW, Chrysler, Ford, GM (Vauxhall/Opel), Mercedes,Rover, Seat, Volkswagen and Volvo engines.

• Also suitable for MAN 2.5TD and Scania heavygoods vehicles

Stock No.40103


*TSP € 38.65 *TSP € 47.54

HNISS55 PIECE 1/2" Sq. Dr. METRIC HUBNUT IMPACT SOCKET SET• Expert Quality • Contents: 30, 32, 34, 35 and 36mm 6 point sockets all

90mm long• Chrome molybdenum steel hardened and tempered and

chemically blacked• For use with high power 1/2" sq. dr. impact wrenches

Stock No.40158


*TSP € 47.99 *TSP € 59.03


410/10P

10 PIECE SET OF 1/2" Sq. Dr.DRAPER EXPERT HI-TORQ® METRICIMPACT SOCKETS• Expert Quality • Forged from chrome vanadium steel hardened,

tempered and chemically blacked for corrosionprotection

Stock No.33667


*TSP € 26.70 *TSP € 32.84

IHS6

6 PIECE 3/4" Sq. Dr. IMPACT SOCKETAND HEXAGONAL BITS SET• Expert Quality • Contents: Impact socket holder bit

3/4" sq. dr x 22mm hex.; 4 hexagonal impact bits size:17, 19, 22 and 24mm; hexagon key • Bit holder hasball and groove for rings and pins • Chromemolybdenum hardened and tempered and chemicallyblacked for corrosion protection

Stock No.04280


*TSP € 67.45 *TSP € 82.96



specialistautomotive socketry An extensive choice of specialist sockets for the automotive industry...When using any of the sockets shown in the table below, always refer tothe manufacturer’s service book or relevant Haynes manual for detailedand concise instructions on usage.

16

Specialist Automotive SocketsThe table below shows the range of Draper Expert Quality specialist sockets, some sockets are impact and can be used with air or electric power tools

1

2

3 4 5 6 7 8 9 10 115 SIDEDSOCKET

1 3/8" 55540 DT-OXY € 7.65 € 9.41

2 1/2" 55993 410D-MM € 3.90 € 4.80

3 1/2" 39046 HTD-MM € 6.50 € 8.00

4 1/2" 71392 410D-MM € 5.60 € 6.89

5 1/2" 16216 HTD-MM € 7.40 € 9.10

6 1/2" 21833 HTD-MM € 8.70 € 10.70

7 1/2" 22192 HTD-MM € 7.65 € 9.41

8 1/2" 71393 410D-MM € 7.80 € 9.59

9 1/2" 35521 HTD-MM € 7.15 € 8.79

10 1/2" 39047 HTD-MM € 8.95 € 11.01

11 1/2" 26916 HTD-AF € 14.60 € 17.96

22MM 3/8" SQ. DR. OXYGEN SENSOR SOCKETExpert Quality , for oxygen sensors. Special slot in the side of socket for sensor wire clearance. Also suitable for diesel injectors foundin Mitsubishi, Nissan, Opel, Vauxhall and VW vehicles. Manufactured from chrome vanadium steel hardened, tempered and chemicallyblacked for corrosion protection. List Price € 12.05 ex. VAT/ € 14.82 inc. VAT

12.5MM 1/2" SQ. DR. PENTAGON IMPACT SOCKETExpert Quality , five point (pentagon) impact socket for the bendix brakes on Citroën and Peugeot vehicles. Each side of the pentagonis 12.5mm. Forged from chrome molybdenum steel hardened, tempered and chemically blacked for corrosion protection.List Price € 5.81 ex. VAT/ € 7.14 inc. VAT

22MM 1/2" SQ. DR. DIESEL INJECTOR SOCKETExpert Quality , 6 point socket for the removal of diesel injectors fitted to GM (Vauxhall/Opel) Mitsubishi, Nissan and Volkswagenvehicles. Forged from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection.List Price € 10.44 ex. VAT/ € 12.84 inc. VAT

26MM 1/2" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality , 12 point socket forged from chrome vanadium steel hardened, tempered and chemically blacked polished forcorrosion protection. For use on Audi and Volkswagen models. List Price € 9.62 ex. VAT/ € 11.84 inc. VAT

27MM 1/2" SQ. DR. DIESEL INJECTOR SOCKETExpert Quality , 6 point socket for the removal of M24 threaded injectors fitted to many car and light commercial diesel engines.Forged from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection.List Price € 12.62 ex. VAT/ € 15.53 inc. VAT

28MM 1/2" SQ. DR. HGV DIESEL INJECTOR SOCKETExpert Quality , 12 point socket for the removal of diesel injectors from HGV’s including Scania and Volvo. Forged from chrome

vanadium steel hardened, tempered, chrome plated and polished for corrosion protection.List Price € 14.59 ex. VAT/ € 17.95 inc. VAT

30MM 1/2" SQ. DR. HUB NUT SOCKETExpert Quality , 6 point socket for hub nuts. Fits Audi, Citroën, Fiat, Ford, GM (Vauxhall/Opel), Lada, Peugeot, Renault, Talbot andVolkswagen models. Forged from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection.List Price € 12.74 ex. VAT/ € 15.68 inc. VAT

30MM 1/2" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality , 12 point socket forged from chrome vanadium steel hardened, tempered and chemically blacked polished forcorrosion protection. For use on Audi and Volkswagen models. List Price € 11.59 ex. VAT/ € 14.26 inc. VAT

32MM 1/2" SQ. DR. HUB NUT SOCKETExpert Quality , 6 point socket for hub nuts. Fits Audi, Citroën, Fiat, Ford, GM (Vauxhall/Opel), Lada, Peugeot, Renault, Talbot andVolkswagen models. Also driveshaft on Rover 200/400 models and Mercedes 7.5 tonne and over commercial vehicles. Forged fromchrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection.List Price € 12.34 ex. VAT/ € 15.17 inc. VAT

35MM 1/2" SQ. DR. HUB NUT SOCKETExpert Quality , 6 point socket for hub nuts on Citroën BX, Xantia and Peugeot J7/J9 vehicles. Forged from chrome vanadium steelhardened, tempered, chrome plated and polished for corrosion protection. List Price € 14.26 ex. VAT/ € 17.53 inc. VAT

38MM 1.1/2"AF BALL JOINT SOCKETExpert Quality , 6 point socket designed specifically for use on ball joints of Rover Mini, Maxi, Allegro, BMC 11/1300. Also flywheelnuts on Rover allegro, Metro, Mini and BMC 11/1300. Forged from chrome vanadium steel hardened, tempered, chrome plated andpolished for corrosion protection. List Price € 22.92 ex. VAT/ € 28.19 inc. VAT

Sq. Stock Part TSP TSPDrive No. No. Description ex.VAT inc.VAT



Air Impact Wrenches...

For ultimate power and control whenusing these impact sockets, the onlychoice is Draper Expert Air ImpactWrenches - see pages 108-113 for somegreat offers on these lower noise low vibration tools...


SAFETY FIRST...Only black finish thick wall impact sockets specifically made for the purpose should beused with impact tools. Chrome plated or normal sockets are not designed to cope with thestresses involved and may shatter, resulting in personal injury. ✓✓ ✗ ✗

Specialist Automotive SocketsThe table below shows the range of Draper Expert Quality specialist sockets, some sockets are impact and can be used with air or electric power tools

24MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality , 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For use on Ford and Mercedes up to 7.5 tonnes. List Price € 21.86 ex. VAT/ € 26.89 inc. VAT

27MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality , 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For use on DAF, Fiat Iveco, Renault, Volvo and Volkswagen vehicles.List Price € 23.10 ex. VAT/ € 28.41 inc. VAT

30MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality , 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For Bedford (3 ton) and Scammel vehicles. List Price € 24.65 ex. VAT/ € 30.32 inc. VAT

32MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality , 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For use on Mercedes vehicles. List Price € 24.65 ex. VAT/ € 30.32 inc. VAT

33MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality , 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For use on Bedford (2 ton), Leyland, Scammel and Volvo wheel nuts.List Price € 25.60 ex. VAT/ € 31.48 inc. VAT

36MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality , 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For hub nuts on Alfa Romeo, Citroën, Fiat, Lancia, Peugeot, VW/Audi and Volvo clutches. Also clutches

on Vauxhall/Opel (GM) and crankshaft pulley nuts on most vehicles’ gearboxes and brakes on Saabs.List Price € 28.66 ex. VAT/ € 35.25 inc. VAT

41MM 3/4" SQ. DR. HUB NUT SOCKETExpert Quality , 6 point socket for the removal of hub nuts on Alfa Romeo, Citroën, Fiat and Ford Sierra Sapphire vehicles.Forged from chrome vanadium steel, hardened, tempered, chrome plated and polished for corrosion protection.List Price € 17.78 ex. VAT/ € 21.87 inc. VAT

56MM 3/4" SQ. DR. HUB NUT SOCKETExpert Quality , 12 point socket for the removal of hub nuts on Ford Transit vehicles 1993 onwards. Forged from chromevanadium steel hardened, tempered and polished for corrosion protection. List Price € 26.42 ex. VAT/ € 32.50 inc. VAT

65MM 3/4" SQ. DR. HUB NUT SOCKETExpert Quality , 12 point socket for the removal of hub nuts on Ford Transit Models 130, 150 and 190 - pre 1993 and rearhub nuts on Iveco vehicles. Forged from chrome vanadium steel hardened, tempered, chrome plated and polished forcorrosion protection. List Price € 26.26 ex. VAT/ € 32.29 inc. VAT

Sq. Stock Part TSP TSPDrive No. No. Description ex.VAT inc.VAT

1 3/4" 71883 411D-MM € 14.60 € 17.96

2 3/4" 71908 411D-MM € 16.10 € 19.80

3 3/4" 71916 411D-MM € 16.50 € 20.30

4 3/4'' 71924 411D-MM € 16.50 € 20.30

5 3/4" 11899 411D-MM € 16.99 € 20.90

6 3/4 71940 411D-MM € 18.65 € 22.94

7 3/4" 26669 TTD-MM € 9.99 € 12.29

8 3/4" 39048 TTD-MM € 15.80 € 19.43

9 3/4" 39049 TTD-MM € 18.00 € 22.14

21 3 4 5 6 7 8 9



409/4/BNR4 piece 1/2" Sq. Dr. DEEP IMPACTNUT AND BOLT REMOVER SET• Expert Quality • Contents: 17, 19, 21 and 22mm• For the removal of damaged, painted over, rounded off

and rusted bolts• Special flutes lock on to

the workpiece for easyremoval

• Chrome molybdenumsteel hardened andtempered withchemically blacked finish

Stock No.05726


*TSP € 23.95 *TSP € 29.46

LWN/DS4

4 PIECE 1/2" SQ. DR. WHEEL NUTDOUBLE IMPACT SOCKET KIT• Expert Quality

• 3 x double-ended impact sockets size 17, 19 and 21mm• One end is hexagon 6pt and the other a reverse conicalgripper thread for the removal of locking wheel nuts

• Complete with a 1/2" sq. dr. 75mm impact extension bar

To be sold only to bona fide garages andemergency service organisations

Stock No.09539


*TSP € 44.40 *TSP € 54.61

Stock No.07033


*TSP€

89.95 *TSP€

110.64

653/5/MM5 PIECE OFFSET METRICRATCHETING RING SPANNER SET• Expert Quality • Contents: 6 x 8 - 19 x 21mm• Cranked pattern for use on flat

surfaces• Reversible ratchet ring

head in each end

Stock No.39226


*TSP € 29.95 *TSP € 36.84

651/5/MM5 PIECE RATCHETING RINGSPANNER SET• Expert Quality • Contents: 6 x 8 - 19 x 22mm• Reversible ratchet ring head in

each end

Stock No.31991


*TSP € 21.50 *TSP € 26.45

Stock No.04619


*TSP€

83.95 *TSP€

103.26

AWNSS/31/2" Sq. Dr. DRAPER EXPERTHI-TORQ® WHEEL NUT SOCKETSFOR ALLOY WHEELS• Expert Quality • 3 x 6 point Draper Expert HI-TORQ

sockets sizes 17, 19 and21mm

• Nylon sleeved to preventdamage to expensivealloy rims

Stock No.59080


*TSP € 22.75 *TSP € 27.98


NEW range! - Ratcheting Open

End/Combination Spanners

8328RMM/88 PIECE DRAPER EXPERTHI-TORQ® METRIC REVERSIBLERATCHETING OPEN END/ COMBINATION SPANNER SET• Expert Quality • Contents: 8 - 19mm• Special stop cap in

ring end ensureswrench does not slippast fixing

• Draper ExpertHI-TORQ reversibleratchet ringend offset at 15º,requiring only 5°movement to turnfastener

Stock No.07034




*TSP € 121.77

Both ratcheting facilities are especially useful in confined spaces, madefrom chrome vanadium steel,hardened, tempered, chrome plated andfully polished throughout

8328MM/88 PIECEDRAPER EXPERTHI-TORQ® METRICRATCHETING OPENEND/COMBINATIONSPANNER SET• Expert Quality • Contents: 8 - 19mm• Draper Expert HI-TORQ

ratchet ring end requiringonly 5° movement to turnfastener

8328FMM/8

8 PIECE DRAPER EXPERTHI-TORQ® METRICFLEXIBLEHEAD RATCHETING OPENEND/COMBINATIONSPANNER SET• Expert Quality • Contents: 8 - 19mm• Draper Expert HI-TORQ 180º flexible

head reversing ratchet ring endrequiring only 5° movementto turn fastener

A new concept for fast working where youcan’t use a ring spanner. Simply place onfastener and rotate to “ratchet" the spanner.The sprung pin automatically retracts, thenlocks into place on the next flat - ready totighten or loosen the fixing. The addedbenefit of these spanners is that there is ahigh quality ratcheting ring end so similarhard-to-get-at fixings can be removed.

See product video onwww.draper.co.uk

UNIQUE ANDPATENTEDRATCHET INOPEN END



8228MM/10/B

10 PIECE DRAPER EXPERT HI-TORQ® METRIC RATCHETINGCOMBINATION SPANNER SET• Expert Quality • Contents: 8 -19mm

• 1/4" x 10mm hexagon drive adaptor• 3/8" sq. drive x 13mm hexagon adaptor• Chrome vanadium

steel hardened,tempered, chromeplated and fullypolishedthroughout

Stock No.07035


*TSP € 85.80 *TSP € 105.53

8228RMM/12/B

12 PIECE DRAPER EXPERT HI-TORQ® METRIC REVERSIBLERATCHETING COMBINATIONSPANNER SET• Expert Quality • Contents: 8 - 19mm• Ratchet action with

forward/reversedirection changer onring end

• Special stop cap inring end ensureswrench does not slippast fixing

• Chrome vanadiumsteel hardened,tempered, chromeplated and fullypolished throughout

8228FMM/7/B

7 PIECE DRAPER EXPERT HI-TORQ®METRIC FLEXIBLE HEADRATCHETING COMBINATIONSPANNER SET• Expert Quality • Contents: 10 - 19mm• Flexible head allows movement through 180°• Ratchet action,

only 5° movementto turn fastener,especially usefulin confined spaces

• Chrome vanadiumsteel hardened,tempered, chromeplated and fullypolishedthroughout

8428MM/8

8 PIECE DRAPER EXPERT X-TORQ™LONG RATCHETING SPANNER SET• Expert Quality

• Contents: 8 - 19mm• Solid forged X profile shaft• Design provides over five times increased surface

contact area compared to astandard spanner

• Shaft is forged at 90° which allowsthe user to fully grip the spannerfor extra torque

• Open end set at 15° and DraperExpert HI-TORQ ratchet ring end,requiring only 5° movement to turnfastener, especially useful inconfined spaces

• Chrome vanadium steel hardened,tempered, chrome plated and fullypolished throughout

8224/12/MM

12 PIECE DRAPER EXPERTHI-TORQ® METRIC COMBINATIONSPANNER SET• Expert Quality • Contents:

8 - 22mm• Deep offset

pattern• Draper Expert HI-

TORQ ring endscranked at 15°

• Chrome vanadiumsteel hardened,tempered, chromeplated and fully polished

throughout

Stock No.64605


*TSP € 26.50 *TSP € 32.60.

7105/8/MM

8 PIECE DRAPER EXPERT HI-TORQ®DEEP OFFSET METRIC RING

SPANNER SET• Expert Quality

• Contents: 6 x 7, 8 x9, 10 x 11, 12

x 13, 14 x15, 16 x

17, 18 x 19and 20 x

22mm • DraperExpert HI-TORQ ring

end cranked at 15°• Chrome vanadium

steel hardened,

tempered, chrome platedand fully polished

throughoutStock No.64607


*TSP € 27.15 *TSP € 33.39

Stock No.07037


*TSP € 87.50 *TSP € 107.63

8224/8/MM

8 PIECE DRAPER EXPERT HI-TORQ®METRIC COMBINATION SPANNER SET• Expert Quality • Contents: 8 - 19mm• Deep offset pattern• Chrome

vanadiumsteelhardened,tempered,chrome platedand fully polishedthroughout

• Open endsset at 15°

Stock No.64604


*TSP € 14.25 *TSP € 17.53

Stock No.07036


*TSP € 124.75 *TSP € 153.44

NEW range! - Ratcheting Combination Spanners

Stock No.06983




*TSP € 106.27

NEW range! - 8 Piece X-TORQ™

Ratcheting Spanner Set



5055/8/MM

8 PIECE METRIC OPEN ENDSPANNER SET• Expert Quality • Contents: 6 x 7, 8 x 9, 10 x 11, 12

x 13, 14 x 15, 16 x 17, 18 x 19 and 20 x 22mm• Open ends set at 15° • Chrome vanadium steel

hardened, tempered, chrome plated and polished

Stock No.64609


*TSP € 15.50 *TSP € 19.07

8229/11/MM11 PIECE DRAPER EXPERT HI-TORQ® METRIC COMBINATIONSPANNER SET• Expert Quality • Contents: 7 - 19mm• Draper Expert HI-TORQ

ring ends crankedat 15°

• Open endsset at 15°

• Chrome vanadiumsteel hardened,tempered, chromeplated and fully polished

Stock No.68234


*TSP € 22.20 *TSP € 27.31

7202/10/MM

10 PIECE METRIC MIDGETCOMBINATION SPANNER SET

• Contents: 4.0 - 11.0mm• Jaws set at 15°• Carbon steel hardened, tempered, chrome plated and

mirror polished

Stock No.19756


*TSP € 10.75 *TSP € 13.22

8235/6/MM6 PIECE DRAPERHI-TORQ METRICCOMBINATIONSPANNER SET• Contents: 34 - 50mm• Chrome vanadium steel

hardened tempered andchrome plated

• Draper HI-TORQ ringends offset at 15°

• Open ends set at 15°• Supplied in wall

mountable plasticstorage rack

Stock No.26695


*TSP € 83.95 *TSP € 103.26

8235/25/MM25 PIECE DRAPERHI-TORQ METRIC

COMBINATIONSPANNER SET• Contents: 6 - 32mm• Chrome vanadium steel

hardened tempered andchrome plated

• Draper HI-TORQ ringends offset at 15°

• Open ends set at 15°• Supplied in wall

mountable plasticstorage rack

Stock No.26696


*TSP € 65.95 *TSP € 81.12

8235/8/MM8 PIECE DRAPER HI-TORQ METRICCOMBINATION SPANNER SET

• Contents: 8 - 19mm• Chrome vanadium steel hardened tempered andchrome plated

• Draper HI-TORQ ring endsoffset at 15°

• Open ends set at 15°

Stock No.27511


*TSP € 11.99 *TSP € 14.75

8235/32

4 DRAPER HI-TORQ COMBINATIONSPANNER SETS• Contents: metric sets: 6-17mm & 10-15mm; AF sets

1/4-5/8" & 1/4-3/4"• Chrome vanadium steel

hardened temperedand chromeplated

• Draper HI-TORQ ringends offsetat 15°

• Open ends setat 15°

• Suppl ied inwall mountableplastic storagerack

Stock No.26697


*TSP € 47.95 *TSP € 58.98

8220/6/MMXL

6 PIECE HEAVY DUTY METRIC LONGPATTERN COMBINATION SPANNERSET• Contents: 33 - 50mm• Chrome vanadium steel hardened, tempered and

chrome plated with polished ring and jaws• Heavy duty canvas wallet with tie cord

Stock No.31167


*TSP € 130.80 *TSP € 160.88




8236/4/MM

4 PIECE HALF MOON (OBSTRUCTION)RING SPANNER SET• Contents: 11 x 13, 13 x 15, 14 x 17 and 19 x 22mm• Chrome vanadium steel hardened, tempered and satin

chrome plated for corrosion protection• Designed for working in confined spaces

Stock No.07210


*TSP € 12.60 *TSP € 15.50

8237/5/MM

5 PIECE S-TYPE (OBSTRUCTION)RING SPANNER SET• Contents: 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x

19mm• Forged from chrome vanadium steel hardened,

tempered and satin chrome plated for corrosionprotection

• Designed forworking inconfined spaces

Stock No.07211


*TSP € 17.40 *TSP € 21.40

D-CRF8

8 PIECE 3/8" Sq. Dr. METRIC CROWFOOT SPANNER SET ON RAIL• Expert Quality • Contents: 10 - 22mm• For use in confined areas• Carbon steel hardened and tempered with black

phosphate finish

Stock No.61034


*TSP € 21.00 *TSP € 25.83

ADJUSTABLE WRENCHES• Expert Quality • Crescent type wrenches manufactured

from chrome vanadium steel hardenedand tempered with black phosphate finish,polished profile and jaws

• Jaws offset at 22°• 150, 200, 250 and 300mm sizes have a

graduated scale on the fixed jaws• Suitable for use in areas where chemicals

and chrome plate can give offpoisonous fumes

Stock List Pr ice List Pr ice *TSP *TSPNo. Length Capacity ex. VAT Inc. VAT ex. VAT Inc.VAT

52679 150mm 24mm €16.32 €20.07 €8.60 €10.5852680 200mm 29mm €17.38 €21.37 €9.60 €11.8152681 250mm 33mm €24.46 €30.08 €12.99 €15.9852682 300mm 38mm €33.60 €41.33 €17.95 €22.0852683 375mm 45mm €61.13 €75.19 €31.50 €38.7552684 450mm 57mm €99.89 €122.86 €54.30 €66.79

ADJUSTABLE HOOK

WRENCHES• Chrome vanadium steel,

hardened, tempered andchrome plated

Stock List Price List Pr ice *TSP *TSPNo. Length Capacity ex. VAT Inc. VAT ex. VAT Inc.VAT

68856 165mm 19-51mm €20.71 €25.48 €11.70 €14.3968857 205mm 32-76mm €29.86 €36.72 €17.25 €21.2269099 290mm 51-121mm €44.93 €55.26 €24.10 €29.65

RIBE/22/SET22 PIECE 3/8, 1/2" Sq. Dr. RIBE™SOCKET BIT SET• Expert Quality • Contents: 3/8" sq.drive. and 1/2" sq.drive. bit holders• 10 x 30mm long Ribe™ bits M4-M14• 10 x 75mm long Ribe™ bits M4-M14• Suitable for use on Fiat, Lancia,

Alfa-Romeo andmany otherapplications

Stock No.72088


*TSP € 35.95 *TSP € 44.22

SEC42B42 PIECE SECURITY BIT SET• Expert Quality • Contents: driver with soft grip handle and 1/4" magnetic

bit holder, 1/4"(F) x 1/4"(M) magnetic bit holder, 3 tri-wing bits, 4 spanner bits, 5 XZN spline bits, 4 squarebits, 12 hexagonal security bits, 3 Draper TX-STAR bitsand 9 Draper TX-STAR security bits

SEC3333 PIECE SECURITY BIT SET• Bit set and holder comprising a selection of 1/4" security

bit types generally available on the market• Contents:, 1/4"(F) x 1/4"(M) magnetic bit holder, 3 torq

bits, 4 spanner bits, 4 tri-wing bits, 12 hexagonalsecurity bits and 9 Draper TX-STAR security bits

Stock No.38716


*TSP € 7.35 *TSP € 9.04

Stock No.03108


*TSP € 15.04 *TSP € 18.50PZ TYPE products are compatible with *Pozidriv®/Supadriv® fixing systems. Draper TX-STAR products and security bits are compatible with †Torx fixing systems.*Pozidriv®/Supadriv® are registered trademarks of Trifast Plc. †Torx is the registered trademark of Camcar/Textron inc



.0DTW-12

1/2" Sq. Dr. DIGITAL TORQUE WRENCH 40-200Nm• Expert Quality • Range 40-200Nm • Soft grip handle • Overall length 490mm

EPTW30-1001/2" Sq. Dr. PRECISIONTORQUE WRENCH 30-100Nm• Expert Quality • Marked range 30-100Nm

EPTW120-400

3/4" Sq. Dr. PRECISION TORQUE WRENCH 120-400Nm• Expert Quality • Marked range 120-400Nm

DTW-38

3/8" Sq. Dr. DIGITAL TORQUE WRENCH 20-100Nm• Expert Quality • Range 20-100Nm • Soft grip handle • Overall

length 390mm

Stock No.12096


*TSP €

105.50*TSP €

129.77

NEW - Digital Torque Wrenches

These two new torque wrenches offer the best of both worlds,the positive"click" of the standard torque wrench and the simple to set action of adigital display. Easily changes from Nm, ft-lb,kg-m in-lb and kg-cm andeach one supplied with a factory checked calibration certificate.

Stock No.12097


*TSP€

107.99 *TSP€

132.83

EPTW5-223/8" Sq. Dr. PRECISION TORQUEWRENCH 5-22Nm• Expert Quality • Marked range 5-22Nm

Stock No.58130




*TSP € 92.97

Professional High Accuracy Torque WrenchesManufactured and calibrated to ISO6789-1992-12-01 STANDARDS Accuracy ±4%

Stock No.58138




*TSP € 121.77

EPTW50-180

1/2" Sq. Dr.PRECISIONTORQUE WRENCH50-180Nm• Expert Quality • Marked range 50-180Nm

Stock No.58139


*TSP € 117.50 *TSP € 144.53

EPTW70-230

1/2" Sq. Dr.PRECISIONTORQUEWRENCH 70-

230Nm• Expert Quality • Marked range 70-230Nm

Stock No.58140


*TSP € 134.70 *TSP € 165.68

Stock No.64673


*TSP € 227.70 *TSP € 280.07



3004A

3/8" Sq. Dr. TORQUEWRENCH 10-80Nm• Marked range 10-80Nm/88.5-708lb-in• Reversible ratchet head• Micrometer-type sleeve allows accurate pre-set

torque values to be set• Calibration certificate included

Stock No.34570

EX. VAT INC VAT

List Price€

59.78 List Price€

73.53*TSP € 29.10 *TSP € 35.79

ATG343/4" Sq. Dr. ANGULARTORQUE GAUGE• Expert Quality • Designed to be used

with any 3/4" sq. drive tool • Rotating arrow headallows operator to accurately tighten fixing tomanufacturer’s exact angular torque specification

• Supplied with fully adjustable reaction arm

Stock No.04466


*TSP € 46.75 *TSP € 57.50

BC1113D6/12/24V BATTERY CHARGER WITHDESULPHATION FACILITY• Expert Quality • Polarity protected• Charging voltage output 6-12-24V• Effective charging current 11A• Av charging current (EN60335) 7A• Thermal overload protection• Dimensions: 470 x 320 x 750mm• Weight: 5.5kg

BC2213D

6/12/24V BATTERY CHARGER WITHDESULPHATION FACILITY• Expert Quality • Suitable for charging lead acid, lead acid

maintenance free, lead AGM, leadcalcium and GEL batteries

• Polarity protected• Fully automatic• Charging voltage output 6-12-24V• Effective charging current 22A• Av charging current (EN60335) 15A• Dimensions: 470 x 320 x 750mm• Weight: 6.35kg

NEW - Battery Chargers

with Desulphation Facility

3001A1/2" Sq. Dr. TORQUEWRENCH 30-210Nm• Marked range 30-

210Nm/22.1-154.9lb-ft• Reversible ratchet head• Micrometer-type sleeve

allows accurate pre-set torquevalues to be set

...More Torque

Wrenches

Stock No.30357


*TSP € 32.50 *TSP € 39.98

3005A

3/4" Sq. Dr. TORQUEWRENCH 65-450Nm• Marked range: 65-450Nm/51.6-29.1lb-ft• Reversible ratchet head • Micrometer-type sleeve

allows accurate pre-set torque values to be set• Calibration certificate included

Stock No.34964


*TSP € 105.00 *TSP € 129.15

Stock No.07265


*TSP € 174.00 *TSP € 214.02

Stock No.07266


*TSP € 252.00 *TSP € 309.96

Microprocessor controlled smart chargers for garage and workshop

use.The chargers will fully maintain the battery when vehicle is not

used for several months.With a built in desulphation capability

allowing the detached sulphite to return to the electrolyte within thebattery. Can be left permanently connected without damage to the

battery. Built in polarity protection for total security. Suitable for use

with lead acid, lead acid maintenance free, lead AGM,lead calcium

and GEL batteries.

ATG1/2" Sq. Dr.ANGULAR TORQUE GAUGE• Expert Quality • Designed to be used with any 1/2"

sq. drive torque wrench • Rotating index line allowsoperator to accurately tighten fixing to manufacturer’sexact angular torque specification

• Supplied with fully adjustable reaction arm

Stock No.40099


*TSP € 11.15 *TSP € 13.71



BCI

12V INTELLIGENTBATTERY CHARGER• Suitable for conventional lead acid,

maintenance-free and absorbent glassmatt (AGM) and gel filled batteries

• 6A charge setting • Fully automatic withtemperature sensor compensation andcontinuous adjustment of unsupervisedcharging • Maintains battery in a 100%fully charged state • LED charging statusdisplay

• Thermal overload safety protection• Charging output 12V • Audible polarity

protection• Dimensions: 184 x 112 x 86mm

Stock No.66806


*TSP € 55.20 *TSP € 67.90

BCD1212/24V 11A BATTERY CHARGER• Suitable for conventional lead acid batteries up to

200Ah• Integral carrying handle, insulated copper leads and

battery clips• Convenient front cable

storage• Dimensions: 260

x 230 x 197mm• Weight: 6.4Kg

Stock No.11953


*TSP € 67.14 *TSP € 82.58

BCSD300T

12/24V 260A BATTERYSTARTER/CHARGER WITH TROLLEY• With trolley wheels for easy movement around the

workshop or yard• The starter/charger has thermal overload protection, an

easy-to-read ammeter,

polarity inversion andtransport handle

• Insulated copperleads andbattery clips

• Dimensions: 270x 240 x 560mm

• Weight: 15.5Kg

Stock No.11966


*TSP € 136.74 *TSP € 168.19

BCSD400T12/24V 360A BATTERYSTARTER/CHARGER WITH TROLLEY• With trolley wheels for easy movement around the

workshop or yard• The starter/charger has thermal overload protection,

battery timer, an easy-to-

read ammeter, polarityinversion andtransport handle

• Insulated copperleads andbattery clips

• Dimensions: 350x 290 x 570mm

• Weight: 23Kg

Stock No.11967


*TSP € 166.80 *TSP € 205.16

BLT100

100A BATTERY LOAD TESTER• For testing 6 and 12V lead acid batteries,

charging and starting circuits found on mostmotorcycles, cars, lightcommercial vehicles, tractors,boats etc

• Up to 100A load test• Tests: state of charge,

cranking ability, chargingsystem output and startermotor

Stock No.53090


*TSP € 41.25 *TSP € 50.74

BCS5000T

12/24V 700A BATTERYSTARTER/CHARGERWITH TROLLEY• Expert Quality • Suitable for charging

lead acid, lead acid

maintenance free, leadAGM, lead calciumand GEL batteries

• Polarity protected• Charging voltage

output 12-24V• Effective charging

current 105A• Av charging current

(EN60335) 70A• Thermal overload

protection• Dimensions: 470 x

320 x 750mm• Weight: 28kg

Stock No.07264


*TSP € 642.00 *TSP € 789.66

...battery care




storage• Dimensions:

285 x 280x 200mm

• Weight:8.5Kg

Stock No.11961


*TSP € 77.99 *TSP € 95.93




storage• Dimensions:

305 x 290x 215mm

• Weight:9.5Kg

Stock No.11964


*TSP € 95.98 *TSP € 118.06



PP12/PRO

12V 1600A HEAVY DUTYPOWER PACK• Expert Quality • Capable of starting 12V petrol

engines up to 3500cc and 12Vdiesel engines up to 1900cc

• Reverse polarity and anti-surgeprotected with heavy duty batteryisolator switch and reverse polarityindicators

• 2M heavy duty booster cables withinsulated jaws

• Rechargeable through 12V vehiclecigarette lighter socket or 230V ACsupply

Stock No.45016


*TSP € 345.99 *TSP € 425.57

PP12VB/HD

12V 900A HEAVY DUTYPORTABLE POWER PACK• Versatile power pack ideal for petrol vehicles

up to 3000cc and diesel vehicles up to2400cc

• On/off power switch, voltmeter with batterycharge, anti-surge protection reversepolarity indicators

• DC power socket allows the running of12V/DC accessories to a maximumcurrent of 15A

• Rechargeable through a 230V AC supply or

a 12V vehicle cigarette lighter socket• Conforms to EN60335-2-29:1997 & EN61000-

61:2001

Stock No.40133


*TSP € 123.01 *TSP € 151.30

HEAVY DUTY BATTERYBOOSTER CABLES• Expert Quality • Manufactured to BSAU 237a• Suitable for 12V and 24V systems

on car and light commercialvehicles• 25mm2 dia. full copper cable

fitted with insulated clamps

Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex.VAT Inc.VAT

51875 3M €83.66 €102.91 €45.30 €55.7254600 5M €130.20 €160.15 €71.10 €87.45

3.7M TOW ROPES• Manufactured to BSAU 187 Specifications• Complete with ‘ON TOW" sign and warning flag

Stock List Price List Price *TSP *TSPNo. Colour Capacity ex. VAT Inc. VAT ex.VAT Inc. VAT

63410 Yellow 2000kg €12.14 €14.94 €7.99 €9.8365297 Red 4000kg €24.22 €29.79 €15.50 €19.07

SH/KIT

SLIDE HAMMER KIT• Blow force from slide hammer removes

stubborn objects

Stock No.52321


*TSP € 33.30 *TSP € 40.96

SCDP1SUCTION CUP/DENT PULLER• Suction pad diameter - 118mm

• Closing handle creates suction• Maximum capacity 20kg., safe working load (SWL)

10kg• Ideal for pulling out minor dents in automotive

body panels• Solid suction pad prevents damage to panel paintwork

Stock No.69187


*TSP € 3.99 *TSP € 4.91

JL16

3M HEAVY DUTY BATTERYBOOSTER CABLES• Expert Quality • Manufactured to BSAU 237a• Suitable for 12V and 24V systems on car and

light commercial vehicles up to 2000cc• 16mm2 dia. full copper cable fitted with

insulated clamps

Stock No.51874


*TSP € 37.15 *TSP € 45.69

CCA BATTERYBOOSTER CABLES• High quality copper coated aluminium cables

with fully insulated clamps, suitable for:8mm2 (up to 1.2L petrol vehicles)10mm2 (up to 1.5L petrol vehicles)

16mm2 (up to 2.5L petrol/1.5L diesel vehicles)25mm2 (up to 5.5L petrol/3.0L diesel)

• Fitted with heavy duty fully insulated clips


06071 1.8M €17.93 €22.05 €11.40 €14.0206072 2.5M €24.60 €30.26 €15.50 €19.0706073 3.0M €37.03 €45.55 €22.75 €27.9806001 3.5M €60.58 €74.51 €35.95 €44.22



...service tools

26

WNTVEHICLE WASHER JETCLEANING TOOL• Expert Quality • Knurled body with pocket clip,

needle point one end and scriberpoint on the other

• For cleaning and repositioning ofvehicle washer jets

• Supplied with end caps to prevent personalinjury when not in use

• Length: 95mm

Stock No.03322


*TSP € 4.70 *TSP € 5.78

WINDOW SCRAPER• Expert Quality • Stainless steel with resin handle• Particularly useful for bonded windscreens

Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex.VAT Inc.VAT

65543 Scraper €20.28 €24.94 €12.30 €15.1365545 12 blades €5.95 €7.32 €4.32 €5.31

BPR7A

7mm BRAKE PAD KEY WITH HANDLE• Expert Quality • Chrome vanadium steel key hardened and tempered

with a chemically blacked finish• Suitable for various brake pad replacement

applications on BMW, Ford and VW/Audivehicles

• Handle length 140mm

Stock No.68425


*TSP € 3.00 *TSP € 3.69

BAW-FN10 x 11mm FLARE

NUT WRENCH• For use on compression nutsfitted on petrol, diesel injection pipes and hydraulic gas orrefrigeration systems

• Manufactured from chrome vanadium steel hardened,tempered and chrome plated for corrosion protection

Stock No.31967


*TSP € 3.42 *TSP € 4.21

SUC2TWIN SUCTION LIFTER• Expert Quality • For the easy lifting of smooth

flat surface materials such asglass etc

• Suction cups 123mmdiameter

• Maximum lift 50kg; safe working

load (S.W.L.) 25kg• Manufactured from high density aluminium alloy

Stock No.69723

EX. VAT INC VAT


*TSP € 30.90 *TSP € 38.01

BPF/PRO/KITBRAKE PIPE FLARING TOOL KIT• Expert Quality • For single and double lap flares in soft copper, steel

and stainless steel brake pipes• Quick change split die blocks for rapid set up with

sliding yoke and quick lift die block clamp• Eight way rotating forming die with 5mm, 6mm, 3/16"

SAE, 1/4" SAE, 3/8" SAE and 5/16" SAE split die blocks

Stock No.49447


*TSP € 215.95 *TSP € 265.62

CWT1

3/8" Sq. Dr. REARBRAKE CALIPERWIND BACK CUBE• Allows the caliper

piston to be woundback for the fitting ofnew brake pads

• For most rear brakecalipers

• Five key patterns• Not for use with

calipers where pressureis required to rewind

Stock No.52334


*TSP € 7.80 *TSP € 9.59

BPF/KITBRAKE PIPE FLARING TOOL KIT• To form single or double lap flares in soft copper and

aluminium pipe• Suitable for 3/16, 1/4, 5/16, 3/8 and 1/2" O/D pipes

Stock No.37870


*TSP € 31.80 *TSP € 39.11

TC163-22mm MINI TUBING CUTTER• Adjustable, for small bore pipes or in-situ

applications where spaceis limited

• Two flare groove rollersand deburring reamer inadjusting knob

Stock No.10579


*TSP € 7.75 *TSP € 9.53



BPTG8BRAKE LINING THICKNESS GUIDE• Expert Quality • Contents: red 2 and 3mm; yellow 4, 5 and 6mm; green

8, 10 and 12mm• For quickly checking remaining life of brake linings• Three blade colours signify wear; red for replace now,

yellow for replace soon and green for OK• Marked in metric with imperial equivalents

Stock No.30819


*TSP € 12.30 *TSP € 15.13

APCT-16PC

16 PIECE PNEUMATIC BRAKE PISTONWIND BACK TOOL KIT• Expert Quality • Pneumatic winder allows left and right handed winding

for easy return of the brake piston into the caliper toprovide clearance fornew brake pads

• 1/4" BSP inlet• 15 adaptor plates fit

most popular vehicles

Stock No.12086


*TSP € 119.99 *TSP € 147.59

CWBT1818 PIECE BRAKE PISTON WIND BACKTOOL KIT• Expert Quality • Left handed and right handed winders allow the easy

return of the brake piston into the caliper to provideclearance for newbrake pads

• Fits most vehicles

Stock No.40141


*TSP € 71.95 *TSP € 88.50

CWBT3939 PIECE BRAKE PISTON WIND BACKTOOL KIT• Expert Quality • Left handed and right handed winders allow the easy

return of the brake piston into the caliper to provideclearance for new brake pads

• Fits most vehicles• Now also includes

pin punches, brakekeys, pentagon bitand sockets

Stock No.09554


*TSP € 95.95 *TSP € 118.02

CWT21/2" Sq. Dr. BRAKE CALIPER PISTONRETRACTION TOOL• Expert Quality • For use on opposed fixed and single piston sliding

calipers• Ensures parallel piston retraction, thus avoiding

damage to piston seals

Stock No.52335


*TSP € 24.75 *TSP € 30.44

179ABS BRAKE SERVICING TOOL• Suitable for Ford Granada (all models post 1985); Ford

Sierra (all ABS fitted models) and Rover 800 (allmodels)

• To wind back the brake pistons on ABS brakes

Stock No.22349


*TSP € 11.10 *TSP € 13.65

394HYDRAULIC BRAKE HOSE CLAMP• Designed as a single-handed snap action tool for

clamping off hydraulic hoses when working on

braking systems

Stock No.11534


*TSP € 4.35 *TSP € 5.35

OE1PNEUMATIC OILEXTRACTION/BRAKE

BLEEDING KIT• Expert Quality • For the extraction of brake

fluid or engine oils frommotor vehicles, motor bikes,marine engines,generators etc.

• Ideal for one personoperation

• Supplied with 1.4M of anti-kink hose, 4 x siphon hosesand brake bleedinghose/connector

Stock No.73291


*TSP € 98.85 *TSP € 121.59



BBK3A

PNEUMATIC UNIVERSAL BRAKEBLEEDING KIT• Expert Quality • One person hand-operated kit that allows brake fluid to

be drawn from the bleed nipple allowing either bleedingor full replacement of system on cars, vans, trucks andmotor bikes • Supplied withreservoir top-up kit • Requires airsupply: 70-120psi (4.8-8.3bar)

Stock No.71205

EX. VAT INC VAT

List Price€ 78.89 List Price

€ 97.03

*TSP € 39.50 *TSP € 48.59

EWS-2FPM

2L BRAKE CLEANER FPM SPRAYER• Expert Quality • High quality virgin plastic with FPM seals which allow

for use with: solvents, fuel, acids, scale removers,

waterproofing, anti-mould solutions, oils and lubricants• Container is graduated in 200ml

increments up to its actual capacity of1.8L which allows for airpressurization ofsprayer

• Adjustable spray pattern• Overall height excluding handle

190mm

Stock No.02709


*TSP € 16.75 *TSP € 20.60

BFE1PNEUMATIC BRAKEFLUID EXTRACTOR• Expert Quality • Ideal for one person operation• For the extraction of brake fluid from hydraulic systems

- especially those with complex ABS systems using acompressed air supply

• Suppliedwith 1.5Mof metalsprungsuction

tube andthree extractionstraws including a doubleadaptor suitable for twin discmotorcycles

Stock No.77056

EX. VAT INC VAT


€ 170.09

*TSP € 64.75 *TSP € 79.64

BFT212V ELECTRONIC BRAKEFLUID TESTER• Expert Quality • Uses boiling point detection on DOT3, DOT4 and

DOT5.1 brake fluid to ascertain when it requiresreplacement through water contamination

• Pipette and reservoir for use on small systems, forexample motorcycles

• Can be used on most types of vehicle includingmotorcycles

• Runs off 12V car battery and Supplied with crocodileclips and 1.7M of cable

Stock No.41392

EX. VAT INC VAT


€ 546.18

*TSP € 228.60 *TSP € 281.18

CAV1UNIVERSAL COOLING SYSTEMVACUUM PURGE AND REFILL KIT• Expert Quality • Dramatically reduces cooling system refill time by

preventing system air locks thus avoidingtime-consuming cooling system bleeding

• Plugs into air line then attaches to the cooling systemto create a vacuum

• Filler hose is then connected allowing pre-mixedcoolant to be sucked easily into the system

• Supplied with screw adaptor and gauge, 1.3M of clearhose, four adaptors and hose end filler

Stock No.09544


*TSP € 71.95 *TSP € 88.50

RTP1RADIATORPRESSURE TEST

KIT• Expert Quality ,• For pressure testing

radiators of most popularvehicles

• 20 custom adaptors allowdirect connection toradiator or expansiontank

• Hand pump with gaugeallows simple and easycontrolled systempressurization via aquick couplingsystem

• Pressure releasepin allowssystem to bedepressurizedprior to

detachment

Stock No.14455


*TSP € 153.00 *TSP € 188.19



RHCP1230mm FLEXIBLE RATCHET HOSECLAMP PLIERS• Expert Quality • For the removal and replacement of metal or

plastic spring-loaded constant tensionhose clamps

• Ideal for working in confined engine bays• Flexible long reach mechanism allows the pliers

to release and lock hose clamps in the openedposition

• Fitted with 700mm long cable• For clamp diameters from 18mm to 54mm (approx.) Stock No.89793


*TSP € 37.95 *TSP € 46.68

AFT-5

ANTI-FREEZE TESTER (DIAL TYPE)• For testing ethylene glycol coolant (anti-freeze) density only• Easy to read temperature scale for accurate interpretation of mixture density

in both centigrade and fahrenheit • Range: -12 to -43°C/+10 to -45°F

Stock No.10629


*TSP €

4.20*TSP €

5.17AFT-4

ANTI-FREEZE TESTER (DISC TYPE)• For testing ethylene glycol coolant (anti-freeze) density only• Six floating discs for accurate reading• Range: -7 to -37°C/+25 to -34°F

Stock No.10627


*TSP € 9.00 *TSP € 11.07

RFR

ANTI-FREEZE TESTERREFRACTOMETER KIT• Expert Quality • Designed for use with standard ethylene glycol and new

organic acid technology (G12 etc.) anti-freeze whichstandard testers are unsuitable for.

• Precision refractometer used for measuring antifreezestrength, battery fluid and screen wash strength

• Refractomer measuring range; antifreeze: 0 -50°; battery fluid gravity: 1.10 - 1.40;screenwash: 0 - 40°

• Supplied with calibration

screwdriver, calibration fluid,pipette andcleaning cloth

Stock No.10645


*TSP € 59.98 *TSP € 73.77

DMM5DIGITALAUTOMOTIVEANALYSER• Expert Quality • 24 position rotary

function and rangeselector • Measures DCvolts and DC amps •Measures resistance

and dwell angle •Takes tachometerreadings • Diode testfacility • Audiblecontinuity tester • Impactresistant rubber case • Recessedinput terminals • Low battery indicator • Test leads(probes and crocodile clips• Dimensions 70 x 147 x 39mm • PP3 battery supplied

Specification:DC amps ... 10ADC volts ... 200mV, 2, 20, 200 and 1000VResistance (Ohms) ... 200, 2k ,20k, 200k, 2M and 20MTachometer (x10rpm) ... 500-10,000Dwell angle ... 3 cyl. 0-120°: 4 cyl. 0-90°

5 cyl. 0-120°: 6 cyl. 0-60°8 cyl. 0-45°

Battery (supplied) ... 1 x 9V PP3 typeSize (W x H x D) ... 70 x 147 x 39mmWeight: ... 189g

Stock No.50024


*TSP € 31.50 *TSP € 38.75

DMM14DIGITAL AUTORANGINGAUTOMOTIVE ANALYSER• Expert Quality • Measures

AC/DC volts and amps •Measures resistance and dwellangle • Measures duty cycleand frequency • Diode testfacility

• Audible continuity tester• Temperature sensor •

Impact resistant rubbercase • Recessed inputterminals • Low batteryindicator • Dimensions 910 x189 x 32mm

• PP3 battery supplied

Specification:DC volts ... 320mV, 3.2, 32, 320 and 1000VAC volts ... 3.23232 and 750VDC current ... 320µ and 3200µA, 33mA, 320mA and 10AAC current ... 320µ a nd 3200µA, 33mA, 320mA and 10AResistance (Ohms) ... 320, 3.2, 32k, 3.2M and 32MTachometer (x10rpm) ... RPM4 600-3200, RPM2 300-3200Dwell angle ... 3 cyl. 0-120°; 4 cyl. 0-90°, 5 cyl. 0-72°; 6 cyl. 0-60°,

8 cyl. 0-45°Duty cycle ... 1 - 90%Frequency ... 320Hz, 3200Hz and 32KHzTemperature range ... -20 to 750°C and -4 to 1400°FBattery (supplied) ... 1 x 9V PP3 typeSize (W x H x D) ... 91 x 189 x 32mmWeight: ... 280g (analyser only)

Stock No.61023


*TSP € 55.15 *TSP € 67.83


Professional Quality Automotive Analysers A must for any auto technician or home mechanic.



11696-24V AUTOMOTIVE CIRCUIT TESTER• Testing range 6-24V DC only• Transparent plastic handle housing neon light• 750mm of insulated cable and crocodile clip

Warning: For testing DC circuits on

vehicles within the voltagerange only. Not suitable for

testing mains supply ACcircuits.

Stock No.12578


*TSP € 2.35 *TSP € 2.89

1170

6-24V AUTOMOTIVE CIRCUIT TESTER• Expert Quality • Testing range 6-24V DC only• Solid brass body housing a test light• Insulation piercing contact point with protective screw

cap

Warning: For testing DC circuits onvehicles within the voltage range only. Notsuitable for testing mains supply

AC circuits.

Stock No.12579


*TSP € 3.80 *TSP € 4.67

1176

BATTERY AND ALTERNATORANALYSER• For testing 12V DC systems only• Checks battery charge level and alternator output level• 880mm of insulated cable with test probe and earth

(crocodile) clip

Stock No.36584


*TSP € 11.10 *TSP € 13.65

INL6/KIT6 PIECE INJECTOR NOID LIGHT KIT• For checking pulse current from Engine Management

Systems to fuel injectors• Suitable for most vehicles EMS

Stock No.57798


*TSP € 11.95 *TSP € 14.70

TL3PISTOL-GRIP XENON TIMING LIGHT• Suitable for checking ignition timing on automotive,

agricultural and marine engines

• Bright Xenon tube for ‘alllighting’ use

• Not for use withmotor cycles

Stock No.52616


*TSP € 26.65 *TSP € 32.78

FCR-EOBD2

EOBD2 DIGITAL ENGINE FAULTCODE READER

• Expert Quality • For use on vehicles post 2001 petrol and post2004 diesel with EOBD compliant engines todiagnose and extinguish engine warning lights

• Supports J1850 VPW/PWM, ISO9141, KW2000and CAN (including extended CAN) protocols.

• Reads engine fault codes and extract freezeframe data within 25 seconds

• Pre-loaded with over 22,000 code definitionsincluding generic and manufacturers specificcodes in its memory

• Memory can be accessed to identify DTCproblems without connection to vehicle

• Simple engine code eraser with auto link andmemory feature.

• Supplied with CD ROM and RS232 interfacecable 1.5M long to allow download to PC forpresentation of data plus EOBD connectioncable

• Zip up soft storage case to protect productStock No.43913


*TSP € 215.00 *TSP € 264.45

RRTK4646 PIECE CAR RADIOREMOVAL KEYKIT• Expert Quality • Selection of keys for the

efficient removal ofconsole and dashboardmounted radio/CD/MP3and DVD players bygarages, emergencyservices and specialistcar audio installers

• Can also be usedwith most sat navand DVD screens

This kit shouldonly be sold to

bona fide

garages, emergencyservices and specialist car audio installers

Stock No.43797


*TSP € 59.95 *TSP € 73.74

SFTAUTO FUSE TESTER AND REMOVER• Expert Quality • Checks continuity of blade-type automotive fuses by

inserting pins into fuse• Fuses can be removed by using integral spring clip• LED illuminates if fuse OK

Stock No.04312


*TSP € 6.50 *TSP € 8.00

Draper TX-STAR bits are compatible with †Torx fixing systems. †Torx is the registered trademark of Camcar/Textron Inc.



ABR-12PC12 PIECE AIR BAG REMOVAL KIT• Expert Quality • For the fast and safe removal of steering wheel airbags• Angled tools allow for airbag removal without removing

the steering wheel column cowling• Kit is also supplied with four Draper TX-STAR and one

hexagon 1/4’ square drive socket bits to aid removal ofparts

• Compatible withmost modern carmanufacturersincluding; Audi,BMW, Ford,

Mercedes, Skodaand GM(Vauxhall/Opel)

Stock No.12078


*TSP € 52.80 *TSP € 64.94

EABT-12 PIECE STRETCH DRIVEBELT TOOL KIT• Expert Quality • Auxiliary belt tool

for removal orinstallation ofstretch type belts

• Comprises aremoval tool andseparateinstallation tool

• Compatible withmost vehicles

Stock No.12893


*TSP € 44.40 *TSP € 54.61

PCT17 PIECE PETROL ENGINECOMPRESSION TEST KIT• Expert Quality • Suits most petrol engined vehicles• Scale measures 0-290psi/0-20bar• Pressure release

valve forrepetitive tests

Stock No.43051


*TSP € 103.20 *TSP € 126.94

DCT512 PIECE DIESEL ENGINECOMPRESSION TEST KIT• Expert Quality • For the accurate testing of compression in direct and

indirect car and van diesel engines• Large easy-to-read

scale measuring 0-1000psi/0-70kg/cm2

• 600mm of flexible hoseand push on adaptorincorporating aSchrader oneway valve

• Side pressure reliefvalve allows rapidretesting.

• Selection of glowplugadaptors, adaptorsand seals

Stock No.43052


*TSP € 163.80 *TSP € 201.47

DCT6CV13 PIECE COMMERCIALVEHICLE DIESEL ENGINECOMPRESSIONTEST KIT• Expert Quality • For the accurate testing of

compression in direct andindirect commercial dieselengines

• Large easy-to-read scalemeasuring 0-1000psi/0-70kg/cm2

• 600mm of flexible hoseand push on adaptorincorporating a Schraderone way valve

• Side pressure relief valveallows rapid retesting.

• Selection of glowplugadaptors, adaptorsand seals

Stock No.43053


*TSP € 147.15 *TSP € 180.99

OPTK112 PIECE OIL PRESSURE TEST KIT• Expert Quality • For the accurate testing of oil pressure switch and

warning indicators• Large easy-to-read scale measuring 0-145psi/0-10bar• 1.4M of flexible hose and push on adaptor

incorporating aSchrader oneway valve

• Side pressure reliefvalve allows rapidretesting

• Ten pressure adaptorsto suit most modernvehicles and assortedrubber seals

Stock No.43054


*TSP € 102.00 *TSP € 125.46

VAC1AVACUUM TEST KIT• Expert Quality • Vacuum gauge and comprehensive accessory kit• Identifies faults in vehicle’s fuel, ignition, ignition

transmission and emission systems• Applications include fuel, ignition, ignition transmission,

air conditioning, fuellines, emissions,vacuum brake andclutch bleedingSpecification:Piston strokevolume

... 1 cubic inchRange... 0 - 76cm Hg ofvacuum

Stock No.68714


*TSP € 59.40 *TSP € 73.06

CRDIFK-2A

DIESEL FLOW & ADAPTORS KIT• Expert Quality • Comprehensive kit for performing the simple test to

determine return flow from the diesel injectors• Quickly indicates faulty or damaged injectors when

cranking or running engine• External flowmeters allow

measurement of returnflow for speedy diagnosis.

• Capable of measuring sixinjectors simultaneosly

• Supplied with adaptorconnectors to allow safecoupling up of flowmeasuring kit to commonrail diesel injectors

Stock No.49445


*TSP € 119.99 *TSP € 147.59



CAM6RECORDING FLEXI INSPECTION CAMERA WITH SD-HCMEMORY CARD SLOT AND 8.8mm dia. CAMERA PROBE• State-of-the-art camera with a tiltable 3.5" TFT LCD colour viewing screen and

1M flexible waterproof probe with a 8.8mm diameter camera head illuminated

by variable brightness LED’s• Gives a high resolution picture of areas that are difficult to see with the nakedeye - i.e. inside of cylinder chambers, vehicle door spaces, corrosion checks andmany other uses in the automotive and professional workshops

• Features full video motion recording and still photograph capture onto standardSD-HC card (supplied separately)

• Built-in microphone and flexible handle with stops at 0°. 45° and 80°• Complete with USB cable, phono TV connection (RCA) lead and clip-on hook,

mirror and magnet accessories.• Powered by four AA batteries (supplied separately)

CAM7RECORDING FLEXI INSPECTION CAMERA WITH SD-HCMEMORY CARD SLOT AND 5.5mm dia. CAMERA PROBE• State-of-the-art camera with a tiltable 3.5" TFT LCD colour viewing screen and 1M

flexible waterproof probe with a 5.5mm diameter camera head illuminated by

variable brightness LED’s• Gives a high resolution picture of areas that are difficult to see with the naked eye- i.e. inside of diesel cylinder chambers, vehicle door spaces, corrosion checksand many other uses in the automotive and professional workshops

• Features full video motion recording and still photograph capture onto standardSD-HC card (supplied separately)

• Built-in microphone and flexible handle with stops at 0°. 45° and 80°• Complete with USB cable and phono TV connection (RCA)• Powered by four AA batteries (supplied separately)

Stock No.05163


*TSP € 316.80 *TSP € 389.66

CAM5FLEXI INSPECTION CAMERA WITHPAL VIDEO OUT CONNECTION AND10mm dia. CAMERA PROBE• State-of-the-art camera with a 2.4" TFT LCD colour

viewing screen and 1M flexible probe with a 10mmdiameter camera head illuminated by six highpower LED’s

• Gives a high resolution picture of areas that aredifficult to see with the naked eye - i.e. inside ofcylinder chambers, vehicle door spaces, corrosionchecks and many other uses in the automotiveworkshop

• PAL video-out connection cable allows real-timeviewing or video recording

• Powered by four AA batteries (supplied separately)

Stock No.13828


*TSP € 155.98 *TSP € 191.85

1M flexible lead for access to areas

impossible to reach by conventional means.

High resolution 2.4"

TFT LCD colour

screen allows a clear

and precise view of

the workpiece

Picture (right) shows camera

in use at the aircraft

conservation unit of the Fleet

Air Arm Museum, Somerset.

10mm dia. water

resistant camera

head illuminated by

six high power LEDs.

New - Flexi-InspectionCameras with videorecording functionalityComplete with high resolution TFT LCD screens, a slot toinsert a standard SDHC memory card which will allow thestorage of video motion pictures and still photography,which can then be downloaded to a PC.

3.5" TFT

high resolution

LCD screen

allows a clear

and precise

view of the

workpiece

USB cableUSB cable

Phono TV connection lead Phono TV connection lead

3.5" TFT

high resolution

LCD screen

allows a clear

and precise

view of the

workpiece

8.8mm dia. water-

proof camera head

illuminated by

variable

brightness LED’s

5.5mm dia.

water-proof

camera head

illuminated by

variable

brightness LED’s

Accessories

Mirror



Stock No.05162


*TSP € 215.95 *TSP € 265.62



DIP3DIESEL INJECTOR PULLER• Expert Quality • Contents: 1.8kg slide hammer with 460mm shaft; puller

adaptor with M16 thread; puller claw to grip injector• For the removal of seized diesel injectors on Mercedes-

Benz CDi 611, 612 and 613 engines and othermanufacturers similar engines

Stock No.31231


*TSP € 74.15 *TSP € 91.20

DTK-MULTI113 PIECE DIESEL AND PETROLENGINE TIMING KIT• For use on Audi, Citroën, Peugeot, Rover, Volkswagen

and Volvo petrol and diesel engined cars and lightcommercial vehicles

Stock No.57629


*TSP € 23.40 *TSP € 28.78

300mm LONG REACH SPARK PLUG WRENCHES• For use with spark plugs which are deep set into engine blocks• Socket end has rubber insert for spark plug insulator protection and retention

Stock List Price List Price *TSP *TSPNo. Plug Size ex. VAT Inc. VAT ex.VAT Inc.VAT

12242 10mm €6.24 €7.68 €3.99 €4.9112243 14mm €6.24 €7.68 €3.99 €4.91

SBSK15

15 PIECE SERPENTINEBELT SERVICE KIT• Expert Quality • For the removal and

maintenance of polyribserpentine belts used on enginedrive systems

• Tackles the restricted workingspace encountered in this areaof the engine compartment

• Ratchet head for ease of use

Stock No.40446


*TSP € 44.50 *TSP € 54.74

MDK

10 PIECE MASTER FUEL ANDAIR CONDITIONINGDISCONNECTION SET• Expert Quality

• For de-coupling automotive heater/airconditioning hoses and fuel lines

• Offset design with spring-loaded actionallowing one-handed operation

• Suitable for a wide variety of vehicles• Colour coded for easy recognition

Stock No.03324


*TSP € 28.99 *TSP € 35.66

GPSK6 PIECE 3/8" SQ. DR. DIESEL GLOWPLUG SERVICE KIT• Expert Quality

Contents: three glow plugremoval sockets; glowplug removal tool withcollet; two glow plugreaming tools

• For the removal andmaintenance of glowplugs in most populardiesel engines

• Comprises threeglow plug sockets,glow plug removaltool and tworeamers for theremoval ofaccumulatedcarbon in theglow plug chamber

Stock No.09541


*TSP € 79.15 *TSP € 97.35

DISC66 PIECE DIESEL INJECTOR SEATCUTTER SET• Expert Quality • Contents: T bar handle assembly;

pilot guide; 4 reamersto suit most popularvehicles/injectormakes

• For cleaning and re-cutting of dieselinjector seats incylinder head

Stock No.30823


*TSP € 55.65 *TSP € 68.45

GPSS

6 PIECE 3/8" Sq. Dr. FLEXIBLEGLOW PLUG SOCKET SET• Expert Quality • Contents: 8, 9, 10, 12, 14 and

16mm sockets all 80mm long• 6 point chrome

vanadium steelhardened andtempered andsatin chromeplated forcorrosionprotection

• Suitable forthe removalof glowplugs inmostpopulardieselengines

Stock No.46858


*TSP € 39.50 *TSP € 48.59



PISTON RING COMPRESSORS• Compresses piston rings to prevent breakage

on assembly• Spring steel with steel adjusting key

Stock List Pr ice List Pr ice *TSP *TSPNo. Capacity Depth ex. VAT Inc. VAT ex. VAT Inc.VAT

51844 45-75mm 50mm €14.88 €18.30 €6.80 €8.3651845 60-100mm 75mm €19.61 €24.12 €9.60 €11.8151846 75-140mm 75mm €23.59 €29.02 €10.60 €13.0451847 70-150mm 100mm €24.48 €30.11 €11.95 €14.70

51-177mm CYLINDER HONE (B)• For cylinders on engines 51-177mm capacity • Can also be used with electric or air drills• Max. speed: 2400r/min • Supplied with 180 grit stone set • Spare stones available


56246 Cylinder Hone €40.25 €49.51 €22.80 €28.0456248 Stone Set - 280 grit €17.33 €21.31 €11.15 €13.7156249 Stone Set - 180 grit €17.33 €21.31 €11.15 €13.7156250 Stone Set - 120 grit €17.33 €21.31 €11.15 €13.71

25-57mm CYLINDER HONE (A)• For cylinders on small bore engines 25-57mm capacity • Can also be used with electric

or air drills • Max. speed: 2400r/min • Supplied with 220 grit stone set • Sparestones available


56244 Cylinder Hone €14.52 €17.86 €8.65 €10.6456247 Stone Set 220 grit €7.58 €9.33 €4.70 €5.78

9902/PVALVE GRINDING KIT• Recycled PVC shaft 240mm long with 19mm

and 22mm diameter rubber suction end• Pots of genuine carborundum fine and

coarse paste

Stock No.72891


*TSP € 6.15 *TSP € 7.56

DRP-HCDIAMOND RACING PASTE VALVEGRINDING KIT• Industrial diamond abrasive will not crush in

use - giving 3 x faster cuttingperformance using less paste fora much smoother, moreuniform finish

Stock No.12085


*TSP € 13.98 *TSP € 17.20

DPT

DIESELPRIMINGPUMP• Expert Quality •

For priming dieselfuel lines, filters andpumps

• Hand bulb with oneway valve and in-linefuel connectors

Stock No.43986


*TSP € 17.30 *TSP € 21.28

LRRS

3 PIECE LIGHT AND RAIN SENSORREMOVAL SET• Expert Quality • For the removal of windscreen mounted rain and light

sensors in around 90% of vehicles on the market

Stock No.04377


*TSP € 24.75 *TSP € 30.44

GSCTGASKET SPLITTING TOOLAND CLEANING KIT• Expert Quality • Designed to split housings along a

gasket joint when using lever barswould damage the joint.

• 15 abrasivepadssupplied toclean jointprior toreassembly

• Brass andsteel blade(supplied)for usewithdifferenthousingmaterials

Stock No.04468


*TSP € 35.75 *TSP € 43.97

FLT1-UNI

UNIVERSAL FLYWHEELLOCKING TOOL• Expert Quality • Adjustable both axially and radially• Can be adapted by user to suit most vehicles

by use of own bolts

Stock No.30830


*TSP € 37.15 *TSP € 45.69

(A)

(B)



VALVE SPRING COMPRESSORS• Expert Quality • Double ended cap support for maximum

versatility on diesel or petrol engines

Stock Throat List Price List Price *TSP *TSPNo. Capacity Depth ex. VAT Inc. VAT ex. VAT Inc.VAT

02325 35-142mm 160mm €85.46 €105.12 €47.70 €58.6702338 35-200mm 250mm €101.06 €124.31 €55.20 €67.90

VSC7

132mm MULTI-WAY VALVESPRING COMPRESSOR• Expert Quality • Variable assembly design allows

use of this tool on most cylinderheads including motorcycles,

small plant machinery andmarine engines

• Includes five valve cups pressurewinding handle and accessories

• Capacity: 180mm; throat depth110mm


CHS22 PIECE CYLINDER HEAD STAND KIT• Expert Quality • Securely supports cylinder heads for most forms of

service and repair applications• Heavy duty steel with zinc plated finish

Stock No.89767


*TSP € 21.00 *TSP € 25.83

CAT247CORROSION ASSESSMENT TOOL• Expert Quality

• Combination tapping hammer, blunt scraper and shortlever for checking corrosion levels in bodywork, panelsand chassis

• Suitable for use in MOT bays• Length: 140mm

Stock No.69721


*TSP € 9.85 *TSP € 12.12

STETH1MECHANICS STETHOSCOPE• Suitable for detecting and pinpointing faults in engines,

bearings and other moving parts• Supplied with two probes 290mm long

Stock No.54503


*TSP € 12.30 *TSP € 15.13

Spring Compressors

Stock No.02339

EX. VAT INC VAT


*TSP € 27.90 *TSP € 34.32

VSC10

68-130mm VALVE SPRING COMPRESSOR• Expert Quality , • Throat depth 160mm

Stock No.02342


*TSP € 20.40 *TSP € 25.09

Stock No.02713


*TSP € 47.75 *TSP € 58.73

Unique double actionlever cams action

provide choice ofoperation either aboveor below valve

VSC9

60-155mm VALVE SPRINGCOMPRESSOR• Expert Quality , • Throat depth 160mm

VSC/UNIUNIVERSAL VALVE SPRINGCOMPRESSOR• Suitable for OHC and OHV

petrol and diesel engines• Allows valve guide rubbers

to be removed/replacedwithout the need to removethe head

• Supplied with valve holder,quick-release aircouplings and valve steminstaller/remover

Stock No.59085


*TSP € 80.35 *TSP € 98.83

Stock No.30832


*TSP € 36.99 *TSP € 45.50

VSC1155-175mm UNIVERSAL VALVESPRING COMPRESSOR• Expert Quality • Suitable for use on most

engines due to double-ended valve cup • Throat depth 165mm



FTS2

110-170mm FUEL SENDER SPANNER• Expert Quality • For the removal and replacement of the retaining ring

on fuel tank sender units• 25mm drive bolt with 55mm long arms

Stock No.43844


*TSP € 15.50 *TSP € 19.07

FTS3

75-160mm FUEL SENDER SPANNER• Expert Quality • For the removal and replacement of the retaining ring

on fuel tank sender units• 25mm drive bolt with 55mm long arms

Stock No.43845


*TSP € 15.99 *TSP € 19.67

4617

10 BLADE METRIC FEELERGAUGE SET• Contents: 0.05-0.080mm• 100mm long taper blades, hardened and

polished for long accurate life

Stock No.73988


*TSP € 2.70 *TSP € 3.32

4616

10 BLADE IMPERIAL FEELERGAUGE SET• Contents: 0.0015-0.025"• 100mm long taper blades, hardened and polished

for long accurate life

Stock No.73970


*TSP € 2.70 *TSP € 3.32

VTG12

12 BLADE COMBINATION TAPPETGAUGE SET• Blades: dual marked 0.203mm/0.008" to

0.660mm/0.026"• 95mm long taper blades, hardened and polished

for long accurate life

Stock No.19577


*TSP € 6.60 *TSP € 8.12

NC9223 PIECE NUT SPLITTER SET• For the safe removal of corroded or damaged nuts

without damaging bolt threads• Capacities: 9-12mm; 12-16mm and 16-22mm

Stock No.55108


*TSP € 19.75 *TSP € 24.29

EXTC280mm EXHAUST PIPE CUTTER• Expert Quality • Cuts exhaust pipes 35-64mm diameter, up to 3mm

thickness• The complete cut can be made in just a quarter of a

turn making this tool ideal for working in confinedspaces under vehicles

Stock No.40100


*TSP € 27.20 *TSP € 33.46

SPRT/KIT7 PIECE SPARK PLUGTHREAD REPAIR ANDRECOVERY TOOL KIT• Expert Quality • Contents: 8 x 1.00mm; 10 x 1.00mm;

12 x 1.25mm; 14 x 1.25mm; 12 x1.25mm; 14 x 1.25mm; 18 x 1.50mm

• For emergency repair of sparkplug threads

• Allows thread repair from thebottom (not the top of the thread)

• Satin chrome plated tool steelhardened and tempered

Stock No.04480EX. VAT




*TSP € 163.84




Pry Bars and Pry Bar Sets


SSS33 PIECE STAINLESS STEELSCRAPER SET• Expert Quality • Contents: scrapers 10 x 165mm;

15 x 170mm and 22 x 175mm long• 1.5mm thick stainless steelblades with lacqueredwood handles

Stock No.30824


*TSP € 15.99 *TSP € 19.67

MPH SET

4 PIECE MINI HOOK AND PICK SET• Designed to ease the removal of ‘O’ rings, split pins,

seals and bushes in variousautomotive applications

• Contents: Awl, Clevis -pin remover, ‘L’ and‘V’ hooks

Stock No.35099


*TSP € 8.25 *TSP € 10.15

178AGASKET SCRAPER• For cleaning cylinder heads, removing old

sealants and carbon, etc.

Stock No.36923


*TSP € 5.90 *TSP € 7.26

ORP2O RING AND SEAL PULLER• Universal seal puller for use on rubber ‘O’

rings, oil and grease seals

Stock No.37439


*TSP € 5.90 *TSP € 7.26

OSP33 PIECE O-RING ANDSEAL PULLER KIT• Expert Quality • Contents:150mm long

needle tip o-ring pick; 115mmT-handle seal pick and puller;165mm T-handle

seal pick and puller

Stock No.24772


*TSP € 14.85 *TSP € 18.27

5SR SET5 PIECE SCRAPER ANDREMOVER SET• Suitable for a variety of applications

including removing cotter pins,radiator hoses, flaking paintand gaskets

Stock No.35100


*TSP € 17.95 *TSP € 22.08

PB/SET/SG3

3 PIECE SOFT GRIP PRY BAR SET• Expert Quality • Chemically blacked finish blades• Striking caps in handles • Impact-resistant

soft grip handles

Stock No.88636


*TSP € 29.40 *TSP € 36.16

PRY BARS WITH ADJUSTABLE FOOT• Expert Quality • Chrome vanadium steelhardened and tempered with curved foot, ribbed onoutside for better traction • Foot has 180°movement with 14 locking positions for improvedaccess and leverage over conventional pry bars


13374 250mm €26.59 €32.71 €15.60 €19.1913377 600mm €74.11 €91.16 €45.00 €55.35

PB/SET4 PIECE PRY BAR SET• Contents: 200, 300, 450 and 600mm long• Chemically blacked finish blades with

PVC handles

Stock No.35396


*TSP € 13.94 *TSP € 17.15

APB-GR

TELESCOPIC PRY BAR WITH ADJUSTABLE FOOT• Expert Quality , chrome vanadium steel hardened and tempered with curved foot,

ribbed on outside for better traction • Foot has 180° movement with 14 lockingpositions for improved access and leverage over conventional pry bars. • Barextends in pre-set graduations from 760-1220mm by a simple push button lockmechanism

Stock No.13378


*TSP € 111.50 *TSP € 137.15

extends 760-1220nm



...motorcycle maintenance

38

MPT15

MAGNETIC STAINLESS STEEL MESHPARTS BOWL• For storage of nuts, bolts, screws etc whilst working• Covered magnetic base for affixing to metal objects

such as vehicle bodywork, tool boxes etc.• Stainless steel mesh construction allows use

in water-based cleaning tanks for small partswashing/degreasing

• Diameter: 270mm

Stock No.31317


*TSP € 9.95 *TSP € 12.24

MPT

MAGNETIC PARTS BOWL• For storage of nuts, bolts, screws etc whilst working• Covered magnetic base for affixing to metal objects

such as vehicle bodywork, tool boxes etc• Diameter: 145mm

Stock No.35384


*TSP € 5.70 *TSP € 7.01

MPM4/44 PIECE TELESCOPIC PICKUP TOOL AND MIRROR SET• Handle with 500mm extendable shaft• Screw-in end allows magnet or mirror to

be attached• Two attachments with 50mm and 30mm

diameter mirrors and 50mm long magnet

Stock No.44001


*TSP € 11.95 *TSP € 14.70

5350610mm PICK-UP TOOL• Fully flexible plated stem with claw action pick-up end,

controlled from spring-loaded grip

Stock No.39669


*TSP € 3.10 *TSP € 3.81

Stock No.11954


*TSP € 6.95 *TSP € 8.55

5360

100-470mm TELESCOPICMAGNETIC PICK-UP TOOL• A fully extendable pick-up tool with magnetic end -

Ideal for the retrieval of nuts screws and objectslost in remote places

Stock No.33080


*TSP € 4.75 *TSP € 5.84

5362540mm HIGH POWER FLEXIBLEMAGNETIC PICK-UP TOOL• Expert Quality • Will lift approx. 1.5kg

Stock No.66198


*TSP € 13.20 *TSP € 16.24

FSDK9 PIECE MOTORCYCLE FORKSEAL DRIVER KIT• Expert Quality • Contents: split drivers size: 35-36mm,

39mm, 41mm, 43mm, 45mm, 46-47mm, 48mm. 49-50mmand 54mm • Split design allows simple use on conventionalor inverted forks • Zinc plated carbon steel hardened andtempered with knurled ring for extra grip

Stock No.04500


*TSP € 247.15 *TSP € 303.99

MCTMOTORCYCLE CHAIN TENSIONER• Expert Quality , holds chain ends at correct

distance apart when replacing split link• Suitable for most chain sizes including 425, 520,

528 and 530

Stock No.30827


*TSP € 14.30 *TSP € 17.59

M302470mm FLEXIBLE SHAFTINSPECTION MIRROR• Fully flexible shaft and fixed head with mirror 55mm,

diameter to give good visibility in concealed areas

This range covers general motor cycle repairswhich can be carried out by the professionalor competent home mechanic. Watch outduring 2012 for more additions to the range



MOTORCYCLE OIL FILTERWRENCHES• Expert Quality • Flexible steel band to securely clamp filter• Design allows easy access to restricted area.• Driven by 3/8" square drive recess


30829 71-79mm €9.48 €11.66 €5.60 €6.8930828 87-95mm €10.20 €12.55 €6.15 €7.56

MOTORCYCLE SPINDLE KEY• Expert Quality ,• For the removal of hollow wheel spindles• Hexagon sizes on tool: 17, 19, 22, 24mm with internal

3/8" square drive in the 19mm hex end

Stock No.30831


*TSP € 14.85 *TSP € 18.27

CCKMOTORCYCLE CHAINCLEANING KIT• For cleaning of motorcycle chains

whilst in-situ• Comprises bottle for holding

cleaning fluid, plastic tube, Ypiece adaptor and chain bathwith cleaning brushes

• Easy set up; bath isclamped over chainand the bottleconnected tobath via plastictubes and chaincleaned

Stock No.30834


*TSP € 28.20 *TSP € 34.69

MWSMOTORCYCLE WHEEL SPINNER• For manual spinning of motorcycle wheels during

routine maintenance

• Wheel sits in cradle and it can be rotated whilstmotorcycle is stationary• Rubber insert in base to stabilize unit when using

Stock No.30837


*TSP € 23.01 *TSP € 28.30

MBPP1

240mm MOTORCYCLE BRAKEPISTON PLIERS• Expert Quality • For the removal of seized pistons

without damaging outer piston surface• Capacity: 19-36mm dia. • Knurled

clamp blocks allow secure grip ofinner piston face • Self-lockingmechanism ensures tightgrip on piston duringremoval

Stock No.30838


*TSP € 19.02 *TSP € 23.40

Stock No.31318


*TSP € 51.54 *TSP € 63.40

CWB/MC

MOTORCYCLE BRAKE PISTON TOOL• Expert Quality • For the simple and controlled retraction of hydraulic

brake pistons when replacing front or rear brake padsDual thickness pad fingers for

ease of access

Stock No.30826


*TSP € 45.00 *TSP € 55.35

CBRK5MOTORCYCLE CHAIN SPLITTERAND RIVETING KIT• Expert Quality • Contents: 1 x chain plate guide,

1 x 3mm rivet pin guide, 1 x 3mm rivet pin, 1 x 4mmrivet pin guide, 1 x 4mm rivet pin, 1 x 5mm rivet pinguide and 1 x 5mm rivet pin. • Designed for splittingand re-riveting motorcycle chains between the range520 - 530, also chains 420 and 428

Stock No.12921


*TSP € 95.00 *TSP € 116.85

CBRK3MOTORCYCLE CHAIN SPLITTER ANDRIVETER KIT• Expert Quality • For splitting chains from No.25 cam chains through to

520 motorcycle final drive chains• To successfully press the rivet from heavy duty 520

drive chains, the rivet head must be ground off first



Motorcycle Stands & Lifts

MCPS1

400kg MOTORCYCLE REAR WHEEL

PADDOCK STAND WITH UNIVERSALSUPPORTS• Lifts and stabilizes any

standard swing armsports motorcyclequickly and easily

• Width and angleadjustable rubbersupport pads

• Minimum/maximumworking width: 220-350mm (approx.)

MCPS2400kg MOTORCYCLE REAR WHEEL

PADDOCK STAND WITH BOBBINSUPPORTS• Lifts and stabilizes

motorcycles withbobbin supportswing arms

• Minimum/maximumworking width: 220-350mm (approx.)

MCPS3

400kg UNIVERSAL MOTORCYCLE

FRONT WHEEL PADDOCK STAND• Height 400mm andwidth 360mm (approx.)

• Rubber support pads• Minimum/maximum

working width 180-340mm (approx.)

Stock No.05630


*TSP € 52.79List Price € 75.98

INC VAT

*TSP € 64.93

New - Front and Rear WheelMotorcycle Paddock Stands

Engineered lap joint for stability under loadhelps prevent lift arms moving while in use

Stock No.05629




*TSP € 64.93

Stock No.05628




*TSP € 64.93

MCPL1

450kg MOTORCYCLE SCISSORPLATFORM STAND• Scissor support stand suitable for use on the

floor or on a motorcycle lift• Rubber mat on platform prevents damage to

underside of machine• Fitted with ball bearing rollers for smooth

lifting and lowering• Lifting height: 84mm (min) to 356mm (max)• Platform size: 380 x 230mm

Complete with rubber coated supports to preventdamage to swing arm and rubber coated anti-skid wheels

Stock No.04991


*TSP € 85.80 *TSP € 105.53

MCPL2

MOTORCYCLE FRAMESCISSOR LIFT• Suitable for use either on a

motorcycle lift or floor• Two sliding “U" shaped supports• 1/2" square drive input• Height: 90mm (min) to 405mm (max)• Platform size: 450 x 150mm

Stock No.04992


*TSP€

87.00 *TSP€

107.01MCPL4160kg QUICK LIFT TRIALSBIKE STAND• Simple foot lifting mechanism• Rubber mat preventing damage to

underside of vehicle• Height: 300mm (min) to 385mm (max)• Platform size: 300 x 205mm

Stock No.04995


*TSP € 56.35 *TSP € 69.31

MCPL3

135kg OFF ROAD MOTORCYCLESCISSOR LIFT• Steel scissor-type construction with foot-operated

hydraulic lifting mechanism• Platform cut-out allows easier access for draining

gearboxes etc.• Rubber mat on platform prevents damage to underside

of machine• Three locking height positions: position 1-475mm;

position 2-640mm; position 3 - 760mm; position4 - 870mm

• Platform size: 408 x 345mm

Stock No.04994


*TSP € 162.00 *TSP € 199.26



MCL1

360kg HYDRAULIC MOTORCYCLE LIFTSpecification:Capacity ... 360kg (800lbs)Lifting range ... 180-680mmLowest working height ... 420mmMaximum working height ... 610mmClosed height ... 180mmWorking table (L x W) ... 1900 x 530mmLoading ramp (L x W) ... 420 x 530mmRear wheel removal panel (LxW) ... 660 x 215mmWeight ... 104kg (lift only)

MCL3

450kg PNEUMATIC/HYDRAULIC MOTORCYCLE LIFT

Specification:Operating air pressure ... 90psi (6.2bar)Air inlet ... 1/4"BSPCapacity ... 450kg (1000lbs)Lifting range ... 180-815mmWorking height 1 ... 540mmWorking height 2 ... 730mmMaximum height ... 815mmClosed height ... 180mmWorking table (L x W) ... 2200 x 680mmLoading ramp (L x W) ... 600 x 550mmRear wheel removal panel (LxW) ... 690 x 245mmWeight ... 141kg (lift only)

MCL2450kg HYDRAULIC MOTORCYCLE LIFT

Specification:Capacity ... 450kg (1000lbs)Lifting range ... 180-815mmWorking height 1 ... 550mmWorking height 2 ... 740mmMaximum height ... 815mmClosed height ... 180mmWorking table (L x W) ... 2200 x 680mmLoading ramp (L x W) ... 600 x 550mmRear wheel removal panel (LxW) ... 690 x 245mmWeight ... 138kg (lift only)

MCL4

680KG PNEUMATIC/HYDRAULICMOTORCYCLE/ATV/SMALL GARDENMACHINERY LIFTSpecification:Operating air pressure ... 90psi (6.2bar)Air inlet ... 1/4"BSPCapacity ... 680kg (1500lbs)Lifting range ... 200-885mmWorking height stops ... 550; 720; 840mmMaximum height ... 885mmClosed height ... 200mmWorking table as motorcycleonly lift (L x W) ... 2200 x 680mmW/table size with extensionsfor ATV use (L x W) ... 1950 x 1220mmMotorcycle loading ramp (L x W) ... 850 x 200mmWeight ... 260kg (lift only)

Stock No.37188


*TSP € 587.00 *TSP € 722.01

Stock No.37157


*TSP € 479.95 *TSP € 590.34



*TSP € 1050.00 *TSP€ 1291.50

Motorcycle Lifts - Stock nos.37058, 37157 and 37188Manufactured to EN1494-2000 Specification.All steel construction with safety table lock device to prevent accidental lowering. Adjustable front wheel clamp and wheel stop bar. Safety tie-down loops secure bike whilst lift is in use and removable rear panel tofacilitate rear wheel changes. Adjustable lowering speed for safe operation.

Base assembly fitted with transport wheels and lock downs to prevent lift from moving whilst in use. Table surface is stippled for safetyand grip whilst loading motorcycles / ATV’s. Heavy duty foot operated hydraulic pump and ramp assembly. Castor wheels have ‘lockdowns’to prevent movement when in use.Supplied fully assembled;you only need to attach wheel clamp and stop bar.

• Large lift that supports motorcycles plus allterrain vehicles (ATV), mini tractors and othersimilar-sized vehicles which can beaccommodated by using two additional sideplatforms for extra width • All steel constructionwith heavy duty foot operated hydraulic pump orpneumatic pump-up system with controller andram assembly • Safety table lock device toprevent accidental lowering • Removable frontwheel clamp and rear panel to facilitate rearwheel changes (motorcycles only) • Baseassembly fitted with transport wheels and lockdowns to prevent lift from moving whilst in use •Table surface is stippled for safety and gripwhilst loading motorcycles • Working table size:1950 x 1220mm including side extension plates(L x W) • Three working heights: 550, 720,840mm • Maximum height: 885mm • Operatingair pressure: 90psi (6.2bar)/Air inlet: 1/4"BSP

Stock No.37058


*TSP € 390.00 *TSP € 479.70



Professional quality jacks Among the best jacks available on the market, manufactured to extremely high standards andthey are designed for professional workshop use.

MC/ATV2680kg HYDRAULICMOTORCYCLE/ATV/SMALL GARDENMACHINERY LIFT• Foot operated lifting mechanism

• Bottle jack style power unit• Rubber support arms to help prevent damage• Suitable for lifting bikes, quads and all terrain vehicles• Lock preventing inadvertent lowering• Brake assisted castors• Height: 125mm (min) to 350mm (max)• Platform size: 335 x 330mm

Stock No.04996


*TSP € 162.00 *TSP € 199.26

TJ10-PRO/HD

10 TONNE TROLLEY JACK• Expert Quality • High quality laser cut steel• Safety overload protection with dead man’s twist

lock handle• Rear swivelling wheels for ease of movement around

workshop• Steel wheels for strength and durability

• Quick lift pedal for rapid saddle raise• Lifting range 195-575mm• Tray for holding work tools on jack body

• Overall size (approx.) 1535 x 430 x 270mm

Stock No.43935


*TSP € 982.65 *TSP € 1208.66

TJ10/HD-LONG

10 TONNE LONG CHASSIS HYDRAULICTROLLEY JACK WITH ‘QUICK LIFT’FACILITY• ‘Quick Lift’ brings saddle into contact with jacking point

without need to pump the handle• Quick release and locking facility allows the handle to

be locked in three positions• Lifting range 155-550mm

• Safety and bypass valves to prevent overloadingthe jack

• Overall size: 1600 x 480 x 250mm

Stock No.48356


*TSP € 616.75 *TSP € 758.60

PHJ20-35-65

20-35-65 TONNE PNEUMATICTROLLEY JACK• Expert Quality • Fast lift triple stage air-operated jack• High quality laser cut steel• Safety overload protection with dead man’s controls

and four position locking handle• Chrome molybdenum vanadium pistons with special

liquid nitride anti-seize surface• Twin rubber tyred wheels for ease of movement

around workshop• 100mm extension to increase jacking range• Overall size (approx.) 1060 x 335 x 170mm• Operating air pressure 100-145psi (7-10bar)• Av. air consumption 9.5cfm/270L/min

•Lifting range @20 tonne .. . 180-415mm withoutext piece

• Lifting range @35 tonne ... 180-334mm withoutext piece

• Lifting range @65 tonne ... 180-258mmwithout ext piece

PHJ15-30

15-30 TONNE PNEUMATICTROLLEY JACK• Expert Quality • Fast lift twin stage air-operated jack• High quality laser cut steel• Safety overload protection with dead man’s controls

and four position locking handle• Chrome molybdenum vanadium pistons with special

anti-seize surface• Twin rubber tyred wheels for ease of movementaround workshop• Overall size (approx.) 805 x 305 x 170mm• Operating air pressure 100-145psi (7-10bar)• Av. air consumption 9.5cfm/270L/min

• Lifting range @15 tonne 185-370mm without

ext. piece• Lifting range @30 tonne 185-275mm without

ext. piece

Stock No.43933


*TSP € 1668.60 *TSP € 2052.38

Stock No.43932


*TSP € 2347.20 *TSP € 2887.06

PH2020 TONNE PNEUMATICTROLLEY JACK• Expert Quality • Fast lift single stage air-operated jack• Manufactured from high quality laser cut steel• Safety overload protection with dead man’s controls

and twin position locking handle• Chrome plated piston for long service life

• Twin rubber tyred wheels for ease ofmovement around workshop

• Supplied with 100mm extension to extendjacking point• Lifting range 215-330mm• Air-operated with male coupling to receive

air line

Stock No.43934


*TSP € 1106.25 *TSP € 1360.69



TJ6-PRO/HD6 TONNE TROLLEY JACK• Expert Quality

• High quality laser cut steel• Safety overload protection with dead man’s twist lockhandle

• Rear swivelling wheels for ease of movement aroundworkshop

• Steel wheels for strength and durability• Quick lift pedal for rapid saddle raise• Lifting range 195-575mm• Tray for holding work tools on jack body• Overall size (approx.) 1250 x 430 x 220mm

Stock No.43930


*TSP € 822.75 *TSP € 1011.98

TJ5/HD-LONG5 TONNE LONG CHASSIS HYDRAULICTROLLEY JACK WITH ‘QUICK LIFT’FACILITY• ‘Quick Lift’ brings saddle into contact with jacking point

without need to pump the handle• Quick release and locking facility allows the handle to

be locked in three positions• Lifting range 145-550mm• Safety and bypass valves to prevent overloading

the jack• Overall size: 1450 x 350 x 200mm

Stock No.48357


*TSP € 483.15 *TSP € 594.27

TJ3/HD-LONG3 TONNE LONG CHASSIS HYDRAULICTROLLEY JACK WITH ‘QUICK LIFT’FACILITY• ‘Quick Lift’ brings saddle into contact with jacking

point without need to pump the handle• Quick release and locking facility allows the handle

to be locked in three positions• Lifting range 120-600mm• Safety and bypass valves to prevent overloading

the jack• Overall size: 1350 x 350 x 200mm

Stock No.48350


*TSP € 360.90 *TSP € 443.91

TJ3HD/QL

3 TONNE HEAVY DUTY GARAGETROLLEY JACK WITH ‘QUICK LIFT’FACILITY• ‘Quick Lift’ pedal brings saddle into contact with jacking

point without need to pump the handle• Lifting range 145-490mm• Safety overload and bypass valves to prevent handle

locking at max. ram extension• Overall size: 640 x 350 x 160mm

Stock No.59301


*TSP € 145.00 *TSP € 178.35


59300 Jack €252.89 €311.05 €127.00 €156.2145508 Saddle €3.60 €4.43 €3.24 €3.99

2 TONNE TROLLEY JACK• Expert Quality • High quality laser cut steel• Safety overload protection with dead man’s twist lock handle• Rear swivelling wheels for ease of movement around workshop• Polyamide wheels to protect floor and reduce noise• Quick lift pedal for rapid saddle raise

• Low entry point 75mm from ground level• Lifting range 75-465mm

• Tray for holding work tools on jack body

• Overall size (approx.) 815 x 365 x 140mm

PALLETIZEDDELIVERIESThe products marked withthis logo can only bedelivered on a pallet.Prior

to purchase please ensure you haveadequate facilities to unload palletizeddeliveries.Contact your Draper stockistfor local information.


43929 Jack €414.02 €509.25 €334.75 €411.7445410 Saddle €18.53 €22.79 €16.68 €20.52

3 TONNE HEAVY DUTY GARAGETROLLEY JACK• Manufactured to EN1494 Specification• Lifting range 145 - 490mm• Safety overload and bypass valves to prevent

handle locking at maximum ram extension• Overall size: 685 x 346 x 160mm



TJ2-PRO-LP2 TONNE LOW PROFILE TROLLEYJACK• Expert Quality • High quality laser cut steel• Safety overload protection with dead man’s twist lock

handle• Polyamide wheels to protect floor and

reduce noise• Rear swivelling and innovative fifth wheel in centre

of jack’s body for ease of movement aroundworkshop

• Quick lift pedal for rapid saddle raise

• Low entry point 75mm from ground level• Lifting range 75-520mm• Tray for holding work tools on jack body• Overall size (approx.) 855 x 365 x 140mm

TJ2/HD-LONG

2 TONNE LONG CHASSIS HIGH LIFTHYDRAULIC TROLLEY JACK WITH‘QUICK LIFT’ FACILITY• ‘Quick Lift’ brings saddle into contact with jacking point

without need to pump the handle• Handle with lowering facility

• Lifting range135-800mm

• Safety overloadand bypass valves to

prevent handle lockingat max. ram extension• Overall size: 1200 x430 x 200mm

TJ22 TONNE TROLLEY JACK• To EN1494 Specification• Lifting range 130- 3850mm• Safety overload and bypass valves to prevent handle

locking at maximum extension• Overall size: 535 x 225 x 145mm

Stock No.37036


*TSP € 46.40 *TSP € 57.07

TJA15/QL1.5 TONNE LOW PROFILE ALUMINIUMTROLLEY JACK WITH ‘QUICK LIFT’FACILITY• Low profile trolley jack with ‘quick lift’ giving extra lift per

stroke of the jack handle thereby requiring less effort toachieve the required height

• 50mm high front roller particularly suitable for low chassisor reduced clearance vehicles

• Lifting range: 85 - 445mm• Fitted with 45mm diameter rear swivelling castor wheels

and large cushioned saddle to aid positioning under thevehicle

• Handle twists for rapid lowering• 10mm thick anodized aluminium ensuring maximum body

strength• Supplied with two piece handle

HGV WHEEL CHOCKS• Expert Quality • For stabilizing HGVs whilst parked• Anti-slip, non-sparking, highly visible heavy

duty HDPE plastic

Stock List Pr ice List Pr ice *TSP *TSPNo. Size For ex. VAT Inc. VAT ex. VAT Inc.VAT

12267 190mm <920mm €31.20 €38.38 €17.65 €21.7112271 250mm >920mm €46.80 €57.56 €25.40 €31.24

RWCRUBBER WHEELCHOCKS• Pair of chocks to prevent

vehicles moving whilstworking with trolleyjacks, scissor jacks,bottle jacks, axle standsor on a slope

Stock No.54500


*TSP € 8.60 *TSP € 10.58

Stock No.43936




*TSP € 606.57

Stock No.48349




*TSP € 332.10

Stock No.45329




*TSP € 284.38



AS6000

6 TONNE AXLE STANDS (PAIR)• Expert Quality • Min. height 535mm/Max. height 870mm

• Capacity per stand -6000kg (S.W.L.)

• Carbon steel hardened andtempered with hardenedsteel pins

Stock No.54722


*TSP € 100.75 *TSP € 123.92

AS20002 TONNE AXLE STANDS (PAIR)• Expert Quality • Min. height 310mm/Max. height 520mm• Capacity (max. per stand): 2000kg (S.W.L)• Carbon steel hardened and tempered with hardened

steel pins• Manufactured to

BSAU223Specifications

Stock No.54721


*TSP € 39.50 *TSP € 48.59

AS2000R

2 TONNE AXLE STANDS (PAIR)• Min. height 280mm/Max. height 405mm• Capacity per stand: 2000kg (S.W.L.)• Ratchet-type action• Large saddle (38 x 85mm)• Manufactured to BSAU223

Specifications

Stock No.64431


*TSP € 23.98 *TSP € 29.50

HIGH LIFTHYDRAULICBOTTLE JACKS• Manufactured to

EN1494 Specification• High Lift featureallows easy loading ofvehicle on tobodywork jigs

• Large stable base withtwo stage ram andbuilt-in overloadprotection system

Stock List Price List Price *TSP *TSPNo. Capacity Range ex. VAT Inc. VAT ex. VAT Inc. VAT

04983 4T 265-610mm €103.22 €126.97 €58.01 €71.3504984 10T 210-520mm €156.96 €193.06 €76.41 €93.9955124 12T 230-570mm €178.51 €219.57 €79.25 €97.48

FARM JACKS• Manufactured and certified to EN1494 Specification• Ratchet-operated heavy duty for lifting and lowering• Suitable for pulling tree stumps and tensioning fences as well as a positioning aid for heavy

machinery• Lifting ranges: 95-1016mm (48"); 95-1325mm (60")• Rated load ... 400kg• Maximum supported loads using steel support pin: 130-300mm lift 2000kg; 300-500mm lift

1600kg; >500mm 500kg


04985 48" €74.14 €91.19 €64.20 €78.9704986 60" €86.50 €106.39 €71.95 €88.50

PROFESSIONAL BOTTLE JACKS• Expert Quality • High quality laser cut steel• Fully welded pressure cylinder for long service

and carrying handle for easy transportation• Safety overload protection• Three piece zinc coated pumping handle with

spring clips for security


43928 25T 240-390mm €238.80 €293.72 €162.50 €199.8843925 30T 242-392mm €251.14 €308.90 €212.65 €261.5643926 40T 246-369mm €324.34 €398.93 €265.80 €326.9343927 50T 252-402mm €362.11 €445.40 €297.60 €366.05

HYDRAULIC BOTTLE JACKS• Manufactured to EN1494

Specification• With unique overload

protection system, largestable base and notchedsaddle

New Capacities:8T; 10T; 15T and 32T


39054 2T 181-345mm €28.80 €35.42 €15.00 €18.4539055 4T 194-372mm €39.62 €48.74 €17.48 €21.5039056 6T 216-413mm €48.41 €59.54 €22.50 €27.6804979 8T 230-457mm €53.14 €65.36 €25.00 €30.7504980 10T 230-460mm €64.25 €79.03 €28.98 €35.6539057 12T 230-465mm €78.94 €97.09 €35.60 €43.7904981 15T 230-460mm €88.97 €109.43 €40.04 €49.2539225 20T 242-452mm €118.44 €145.68 €51.50 €63.3504982 32T 286-465mm €203.95 €250.86 €99.99 €122.99

Lifting products for automotiveand agricultural applications



ES300300kg UNIVERSAL ENGINE/ GEARBOXSUPPORT• Allows work to be carried out on front wheel

drive/transmission/drive shafts with engine suspended in-situ • Adjustable extension arms with locking feature

ES500500kg UNIVERSAL ENGINE/ GEARBOXSUPPORT• Enables work to be carried out whilst engine is

suspended in situ • Rubber protected gutter supports •Support centre can be adjusted along full length of beam

LL500500kg LOAD LEVELLER FORENGINE CRANES• S.W.L. 500kg

max • Forlevelling heavy

and off centreloads quicklyand easily

• For use withDraper EngineCranes andothermanufacturerssimilar cranes

Specification:Capacity ... 300kgMaximum extended width ... 1550mm (approx.)Minimum width ... 1100mm (approx.)Screw depth ... 300mm

Specification:Capacity ... 500kgMaximum extended width ... 1550mm (approx.)Minimum width ... 1100mm (approx.)Screw depth ... 300mm

TJ600TV600kg VERTICAL TRANSMISSIONJACK• Height range 1175-1985mm• Features high speed lift foot pedal

• Hand operated precision releaseincorporating overload safety valve,large diameter wheels for easymanoeuvrability

ES450450kg ENGINE/ TRANSMISSION STAND

Specification:Capacity ... 450kgWidth Front ... 400mmRear ... 800mmOverall length ... 800mmHeight ... 910mmWeight ... 21kg

Industrial quality products designedspecifically for the professionalautomotive workshop - that’s theDraper difference!

Stock No.56731


*TSP € 234.60 *TSP € 288.56

Stock No.53092


*TSP € 81.50 *TSP € 100.25

Stock No.53094


*TSP € 61.80 *TSP € 76.01

Stock No.61033


*TSP € 82.75 *TSP € 101.78

Stock No.56730


*TSP € 38.95 *TSP € 47.91

Specification:Capacity ... 600kgStroke ... 700mmBase width ... 560mmBase length ... 570mmWeight ... 39kg

• Accepts a wide variety ofengines and transmissions

• The swivelling head (360°)gives accessibility to all partsof the engine

engine/gearbox

lifting/

support Stock No.53095


*TSP € 97.80 *TSP € 120.29

TJ200T150kg FLOORTRANSMISSION JACK• Manufactured to EN1570 Specification• For lifting and lowering gearboxes and

differential units• Driven by 1/2" sq dr adaptor• Scissor-type design provides

precise movement allowing user toaccurately manoeuvre and fittransmission assembly

• Min. height 170mm/Max. height570mm

floor transmission jack adjusts fromminimum height of

170mm to amaximum height

of 570mm

TJ10001000kg HIGH LIFTVERTICALTRANSMISSION JACK• Double ram for high lift and two foot

pedals - one for raising and other forlowering

• Cradle has adjustable supports allowing loadto be secured whilst in use

• Large diameter castors for easymanoeuvrability when unladen

Specification:Height (min) ... 830mmHeight (max.) ... 1800mmCradle size ... 300 x 300mmBase width ... 730mmBase length ... 730mmWeight ... 79kg

Stock No.04988


*TSP € 522.00 *TSP € 642.06



engine cranes


AEC1000450kg CHAIN FOR ENGINE CRANES• S.W.L. 450kg• Chain length 780mm• For use with Draper Stock Nos. 02610, 02611, 43924 and

53091 and other manufacturers similar cranes

EC10011 tonne FOLDING ENGINE CRANE• Foldable engine crane with single piston hydraulic pump

EC20012 tonne FOLDING ENGINE CRANE• Foldable engine crane with single piston hydraulic pump

EC2000/PRO2 tonne FOLDING ENGINE CRANE• Expert Quality • Safety overload valve • Fine

adjustment lowering handle with dead man’s operationto prevent rapid uncontrolled lowering of load

• Polyamide swivelling wheels to protect floor and reducenoise • Supplied fully assembled

Stock No.02611


*TSP € 250.80 *TSP € 308.48

Stock No.02610


*TSP € 191.95 *TSP € 236.10

Stock No.43924


*TSP € 1378.15 *TSP € 1695.12

Stock No.59077


*TSP € 24.25 *TSP € 29.83

ALL OUR ENGINECRANES FOLD FOR

EASY COMPACTSTORAGE



Stock No.58157


*TSP € 263.95 *TSP € 324.66

Stock No.58158


*TSP € 311.99 *TSP € 383.75

Stock No.58159


*TSP € 454.80 *TSP € 559.40

Stock No.43921


*TSP € 1766.25 *TSP € 2172.49

HBP/1010 TONNE HYDRAULIC BENCH PRESS• Hydraulic gauge• Ram stroke 190mm• Working table width 360mm

• Overall height 990mm

Specification:Capacity ... 10 tonnesRam stroke ... 190mmHeight - ram to table .. . 360mm (max.)

... 190mm (min.)Table aperture ... 140mmWorking table width ... 360mmOverall height ... 990mmWeight ... 53kg

HFP/1010 TONNE HYDRAULIC FLOOR PRESS• Hydraulic gauge • Ram stroke 190mm• Working table width 420mm • Overall height 1525mm

Specification:

Capacity ... 10 tonnesRam stroke ... 190mmHeight - ram to table ... 918mm (max.)

... 0mm (min.)Table aperture ... 90mmWorking table width ... 420mmOverall height ... 1525mmWeight ... 65.5kg

HFP/2020 TONNE HYDRAULIC FLOOR PRESS• Hydraulic gauge • Ram stroke 190mm• Working table width 555mm • Overall height 1770mm

Specification:Capacity ... 20 tonnesRam stroke ... 198mmHeight - ram to table ... 885mm (max.)

... 33mm (min.)Table aperture ... 105mmWorking table width ... 555mmOverall height ... 1770mmWeight ... 128.5kg

hydraulic presses

HFP50/PRO50 TONNE HYDRAULICFLOOR PRESS• Expert Quality • Twin pump system• Fast action for rapid approach to the workpiece

and fine for controlled pressure• Hydraulic gauge included• Supplied with two V blocks for working on pipes

and small workpieces• Supplied fully built for speed of installation

- just screw on the gauge and bolt on feet

Specification:Capacity ... 50 tonnesHydraulic stroke ... 120mmHeight - ram to table ... 615mm(max.)

... 165mm(min.)Extension screw ... 75mmHead side stroke ... 250mmTotal stroke (ext. + head side) ... 195mmWorking area width ... 710mmOverall height ... 1810mmWeight ... 239kg

Rack and pinionwinch for safehandling of the

work table.

Sliding head toallow correctalignment of the

press ram.

Lead screw forrapid setting of

the pressure ram.

Pressure gaugeat eye level toensure correct

load is applied.

quality features...



Stock No.37874


*TSP € 141.00 *TSP € 173.43

Stock No.37875


*TSP € 205.25 *TSP € 252.46

BR10/KIT10 TONNE

HYDRAULICBODY REPAIR KIT• 10 tonne pump unit• 14 accessories• Steel storage/carrying case• Weight: 38kg

1 TONNE LOAD SLINGS• Expert Quality • The safe working load (SWL) is rated

at 1000kg for a load at one end(straight configuration)

• The safe working load (SWL) is ratedat 2000kg for a load between the loopeyes (‘U’ configuration)










draper expert quality

load slingsLoad slings are designed for lifting and moving heavy,

awkward-shaped items around warehouses, distribution

centres and quaysides.They can be used in straightconfiguration or as a pair to increase the carrying

capacity. As with lifting and carrying a risk assessment

should be carried out by the operator prior to using a

load sling.This includes checking for acid or caustic

burns; melting or charring of any part of the sling’s

surface; snags, punctures, tears or cuts; broken or worn

out stitching and the sling itself is not stretched.When not

in use slings must be stored correctly and inspected

regularly.

Draper load slings are tested to breaking point by an

independent and respected UK test house to ensure they

are totally safe at the rated load.

Manufactured to BS EN 1492-1:2000 from heavy dutypolyester webbing with reinforced lifting eyes and colour

coded to European standards to identify capacities.

hydraulic bodyrepair kitsPowerful body repair kits - Stock No. 37874 has a 4 tonne pump

unit,whilst Stock No.37875 has a super-heavy 10 tonne pump

unit.Both are supplied in tough

steel storage cases.

5 TONNE LOAD SLINGS• Expert Quality • The safe working load (SWL) is rated at

5000kg for a load at one end(straightconfiguration)

• The safe working load (SWL) is rated at10,000kg for a loadbetween the loop eyes(‘U’ configuration)


02381 1M €6.17 €7.59 €3.75 €4.6102382 2M €10.15 €12.49 €6.15 €7.5602383 3M €13.99 €17.21 €8.35 €10.2748310 4M €15.77 €19.39 €9.50 €11.6948330 5M €23.38 €28.75 €13.99 €17.21

Stock List Price List Price *TSP *TSP

No. Length ex. VAT Inc. VAT ex.VAT Inc.VAT02386 1M €11.76 €14.46 €7.15 €8.7902387 2M €19.54 €24.03 €11.70 €14.3902388 3M €27.14 €33.39 €16.35 €20.1102389 4M €34.44 €42.36 €20.70 €25.4648314 5M €37.70 €46.38 €22.65 €27.86


48316 1M €12.62 €15.53 €7.65 €9.4102392 2M €30.29 €37.26 €17.39 €21.3902393 3M €41.11 €50.57 €24.75 €30.4448319 4M €44.76 €55.05 €26.90 €33.0948320 5M €55.61 €68.40 €33.35 €41.02


48321 2M €32.76 €40.29 €19.75 €24.2902397 3M €56.52 €69.52 €33.90 €41.7048323 4M €61.78 €75.98 €37.15 €45.6948324 5M €76.51 €94.11 €48.99 €60.26


02400 2M €51.24 €63.03 €30.85 €37.9502401 3M €71.57 €88.03 €42.95 €52.8302402 4M €92.14 €113.33 €55.20 €67.9002403 5M €112.61 €138.51 €67.50 €83.03

BR4/KIT4 TONNE HYDRAULICBODY REPAIR KIT• 4 tonne pump unit• 15 accessories• Steel storage/carrying case• Weight: 22.5kg



BC10001 tonne BEAM CLAMP• Expert Quality • Girder beam width: 75-260mm• Overall width (beam clamp): 180-360mm• Depth (beam clamp): 64mm

BC20002 tonne BEAM CLAMP• Expert Quality • Girder beam width: 75-260mm• Overall width (beam clamp): 180-360mm• Depth (beam clamp): 64mm

BC30003 tonne BEAM CLAMP

• Expert Quality • Girder beam width: 80-354mm• Overall width (beam clamp): 235-490mm• Depth (beam clamp): 103mm

BC50005 tonne BEAM CLAMP• Expert Quality • Girder beam width: 80-354mm• Overall width (beam clamp): 235-490mm

• Depth (beam clamp): 110mm

beam clampsFour professional beam clampsfor semi-permanent attachmentto steel RSJ’s to act as lifting pointfor chain blocks, hoists andlifting tackle. These usefulproducts can also be used for thelifting and transfer of steel

beams and as a pulling clamp. All four are supplied completewith a test certificate...

Ideal for the workshop or factory; these chain hoists have high

quality welded chains with safety latches on the load hooks and

are tested and certified to BS EN 13157:2004.

Their compact gear housing allows use in

areas of limited clearance, plus they feature

triple spurred geared shafts and pinions with

load braking... that's the Draper difference!

chain hoists

1,2, 3 &5 tonne

capacities

standardlift: 3M

CH5000.5 tonne MANUAL CHAIN HOIST(CHAIN BLOCK)• Expert Quality • High quality welded chain, 5mm diameter, with

safety latches on the load hooks• Hook aperture: 23mm

CH10001 tonne MANUAL CHAIN HOIST(CHAIN BLOCK)• Expert Quality • High quality welded chain, 5mm diameter, with


CH2000

2 tonne MANUAL CHAIN HOIST(CHAIN BLOCK)• Expert Quality • High quality welded chain, 6mm diameter, with


CH30003 tonne MANUAL CHAIN HOIST(CHAIN BLOCK)• Expert Quality

• High quality welded chain, 7mm diameter, withsafety latches on the load hooks

• Hook aperture: 39mm

CH50005 tonne MANUAL CHAIN HOIST(CHAIN BLOCK)• Expert Quality • High quality welded chain, 10mm diameter, with


Stock No.48344


*TSP € 48.15 *TSP € 59.22

Stock No.48346


*TSP € 49.99 *TSP € 61.49

Stock No.48347


*TSP € 73.99 *TSP € 91.01

Stock No.48348


*TSP € 83.45 *TSP € 102.64

Stock No.48335


*TSP € 78.80 *TSP € 96.92

Stock No.48336


*TSP € 93.30 *TSP € 114.76

Stock No.48338


*TSP € 148.20 *TSP € 182.29

Stock No.48339


*TSP € 228.60 *TSP € 281.18

Stock No.48340


*TSP € 276.30 *TSP € 339.85



EH125/250125/250kg 500W 230V POWER HOISTSpecification:Capacity: (single cable) ... 125kg

(double cable) ... 250kgLifting height: (single cable) . .. 11M

(double cable) ... 5.5MLifting speed ... 1 min (approx.)Cable length ... 12MCable dia. ... 3.0mm

EH200/400200/400kg 750W 230V POWER HOISTSpecification:Capacity: (single cable) ... 200kg

(double cable) ... 400kgLifting height: (single cable) .. . 11M

(double cable) ... 5.5MLifting speed ... 1 min (approx.)Cable length ... 12MCable dia. ... 3.8mm

CC2MECHANICS CREEPER/SEAT• Heavy duty powder coated steel frame• Easily converts to seat form• Quality covering• Length: 1200mm

Stock No.56224

CC4MECHANICS CREEPER• Rigid PVC construction with six multi directional castors for easy movement• Moulded back for user comfort with tool trays and foam head rest• Maximum carrying weight 150kg (23.5 stone)• Length: 1010mm

Stock No.43976

LH1500

1.5 tonne LEVER HOIST• Expert Quality • Hook aperture: 31mm• Lever pull to lift full load: 26kg

LH30003 tonne LEVER HOIST• Expert Quality • Hook aperture: 40mm• Lever pull to lift full load: 38kg

Ideal for theworkshop or

factory; these

lever hoists

include a ‘free

chaining’

feature to allow

slack in the

chain to be

taken up prior

to ratchet arm

engagementand a totally

enclosed

pinion gear

with heavy

duty brake.

Each is

supplied with a

test certificate.

leverhoists

LH7500.75 tonne LEVER HOIST• Expert Quality • Hook aperture: 26mm• Lever pull to lift full load: 22kg

MECHANICS FOAM MATS• Ideal for working under vehicles etc.• High quality closed-cell EVA foam fully oil and

water-resistant

Our power hoists are ideal for use inmany industrial applications where anexisting support facility exists.

They are approved to EU and UKlifting regs and include remotecontrol units with emergency stopbuttons and support brackets.

Stock No.48341


*TSP € 112.50 *TSP € 138.38

Stock No.48342


*TSP € 135.90 *TSP € 167.15

Stock No.48343


*TSP € 205.20 *TSP € 252.40

Stock No.48333


*TSP € 123.50 *TSP € 151.91

Stock No.48334


*TSP € 163.15 *TSP € 200.68


64278 220 x 336mm €16.63 €20.46 €9.90 €12.1864279 980 x 380mm €46.20 €56.83 €26.60 €32.72

Stock No.56224


*TSP € 98.90 *TSP € 121.65

Stock No.43976


*TSP € 53.85 *TSP € 66.24

power hoists



Stock No.37825


*TSP € 160.75 *TSP € 197.72

Stock No.37826


*TSP € 74.35 *TSP € 91.45

Stock No.38860 25mm


*TSP € 2.60 *TSP € 3.20



*TSP € 27.85 *TSP € 34.26

Stock No.37871


*TSP € 11.15 *TSP € 13.71

Stock No.77592


*TSP € 3.99 *TSP € 4.91

Stock No.13771


*TSP € 4.20 *TSP € 5.17

DPW2BENCH-MOUNTED PARTS WASHER• For the degreasing of component parts prior to assembly• Sturdy steel construction, enamelled finish with lid• Tank capacity 12L• Overall dimensions 470 x 340 x 250mm• Not suitable for use with solvent based cleaning fluids• Fitted with cable and approved plug

DPW1FLOOR STANDING PARTS WASHER• For the degreasing of component parts prior to assembly• Sturdy steel construction, enamelled finish with “fire drop"lid • Tank capacity 54.5L • Overall dimensions800 x 550 x 890mm • Dimensions: Tank-internal 725 x 790x 270mm • Not suitable for use with solvent based cleaningfluids • Fitted with cable and approved plug

4858260mm PARTS CLEANING BRUSH• Plastic handle with bristle head

OFW57-12057-120mm OIL/FUEL FILTER PLIERS/WRENCH• Expert Quality • Slip joint allows easy adjustment and swivel

gripping jaws adjust to 45° and 90°positions to access oil filtersin awkward positions.

CWHD260-160mm HEAVY DUTYCHAIN WRENCH

OFW375-120mmTHREE LEGOIL FILTERWRENCH

OFW100100mm OIL FILTER WRENCH

255130mm OIL FILTERWRENCH• Heavy duty chain with

tightening nut whichcan be operated witha 1/2" squaredrive or 24mmwrench

OFW300280mm OIL FILTERSTRAP WRENCH• 1M x 38mm

wide heavyduty webbingstrap

256120mm OIL FILTER STRAP WRENCH• Can be driven by 1/2" sq drive

or 21mm wrench

• Expert Quality • Swivel head design with

14mm hexagonal shaftallowing socket or spanner

use for additional torque• 06B heavy duty duplex

chain for safety andsecurity with double

locking system

• The automatic action clampingring has a serrated inner

surface for secure grip• Fits most oil filters

• Expert Quality • Ideal for use on car and

commercial vehicle oil filters• Serrated legs clamp oil filter for

easy removal• 1/2" sq. drive with 1/2" sq. dr./ 19mm - 3/4" AF spanner adaptor

• Ribbed jaw designensures solid gripon filters duringremoval



*TSP € 6.20 *TSP € 7.63

Stock No.30822


*TSP € 26.65 *TSP € 32.78

Stock No.56137


*TSP € 9.30 *TSP € 11.44


23759 Strap Wrench €58.13 €71.50 €35.85 €44.1023767 Spare Strap €16.85 €20.72 €11.10 €13.65

1M ELORA STRAP WRENCH• Heavy duty strap, ideal for use on sanitary fittings, pipes, oil filters, etc.• Capacity 280mm (approx,) • Bar length: 280mm • Width of strap: 25mm• Handle manufactured from chrome vanadium steel hardened, tempered and

chrome plated for corrosion protection



OFC-12PROOIL FILTER CRUSHER• Expert Quality • For the disposal of used oil filters

from cars, vans, tractors, etc.• Flattens oil filters and extracts last

drop of oil for recycling of both usedoil and metal filter

• Air operated with safety lock-outdevice which prevents the door beingopened during operation

• Designed to fit onto the top of astandard 205L steel oil drum

• Lifting eye on crusher to lift andreplace disposal vessel when full• Overall unit height 850mm• Weight 78kg


SWR2

2 PIECE SOFT GRIP STRAPWRENCH SET• Flexible rubber strap fits any shape• For loosening oil filters, plastic pipe joints

and other similar applications

Stock No.43863


*TSP € 7.20 *TSP € 8.86

Stock No.43922


*TSP € 1580.80 *TSP € 1944.38

OE2MANUAL OR PNEUMATIC OIL

EXTRACTOR• Expert Quality • Ideal for one

person operation• For the extraction

of engine oils frommotor vehicles,motor bikes, marineengines, gearboxes,generators etc.without the removal ofthe oil drain plug

• Easily operated by usinghand pump action orcompressed air supply

• Supplied with 1.5M of suctiontube and three extraction strawsSpecification:Reservoir capacity ... 10LAir inlet size ... 1/4" BSPSuction tube pressure ...0.8MPaWeight(empty) ... 4kg

Stock No.77057


*TSP € 105.00 *TSP € 129.15

OD3636L TELESCOPIC OIL DRAINER (A)• Adjustable height from 760 to 1600mm• Suitable only for engine or gearbox oil

Stock No.65346


*TSP € 82.75 *TSP € 101.78

OIL DRAINERS (B)• Expert Quality • 2M x 25.4mm discharge hose • Air discharge• Safety valve • Castors for easy manoeuvrability around

the workshop • 18L steel collection pan with oilreservoir level indicator

Stock List Price List Pr ice *TSP *TSPNo. Capacity Height ex. VAT Inc. VAT ex. VAT Inc.VAT

78404 65L 1510mm €494.38 €608.08 €191.95 €236.1078405 90L 1850mm €525.31 €646.13 €215.95 €265.62

(A) (B)

SRIKOIL SEAL REMOVAL ANDINSTALLATION KIT• Expert Quality • Allows simple

removal andreplacementof oil sealspreventingunnecessaryand time-consumingdismantlingof engines

• Compr isesof 19popular-sizedadaptors andcompatibleseal puller

Stock No.04582


*TSP € 88.40 *TSP € 108.73

SPRK114114 PIECE OIL SUMP PLUGREPAIR KIT• Expert Quality • Comprehensive kit

for the repair ofdamaged oil sumpplug drain plugthreads

• Comprises sixdifferent-sized tapseach with six sumpbolts and washers

• Packed in blowmould case withEVA foam insert

Stock No.24014


*TSP € 95.95 *TSP € 118.02


BD205

DRAIN LID FOR 205L BARRELS• Intended to be installed atop a standard 205L barrel, the

drain lid marries with the barrel inlet• Chemical resistant high density polyethylene with UV

stabilizer• Ribbed drainage channels and a filter gate to catch

foreign objects

Stock No.04266


*TSP € 40.70 *TSP € 50.06



LPDP

30L SLIMLINE OIL ANDWATER DRAIN PAN• Expert Quality • Allows oil or water to be drained

without the need to raise the vehicle or waste valuableliquids • Strong durable plastic with recessed mouldedintegral handles • Four heavy duty low profileswivelling castors • Removable anti-splash grille

• Three separate drain plugs • Dimensions: 850 x600 x 100mm

Stock No.40143


*TSP € 44.40 *TSP € 54.61

OP1616L OIL DRAIN PAN• Anti-splash lip, large handles and enclosed spout helps

reduce spillages• Overall diameter: 450mm

Stock No.73038


*TSP € 15.50 *TSP € 19.07

MODP

MOTORCYCLE OIL DRAIN PAN• Designed for use with motorcycles and oil changes for

small engines• High density polyethylene, resistant to to most

chemicals and solvents• Ribbed surface to aid drainage

Stock No.04265


*TSP € 8.35 *TSP € 10.27

DPK/SET5 PIECE DRAINPLUG KEY SET• Contents: 5/8" - 9mm

hex; 3/8" - 11mm sq;10 - 12mm hex; 8 -13mm sq; 14 - 17mmhex.

• Double-ended keysizes with satin chromeplated finish

Stock No.56627


*TSP € 11.15 *TSP € 13.71

HEAVY DUTY FUNNELS• Expert Quality • Translucent polypropylene• Dust cover, anti-spill/splash lip and wire mesh filter in base to

prevent the ingress of foreign matter• Barrel connector supplied with 230mm/3L funnel

Stock List Price List Price *TSP *TSPNo. Size Capacity ex. VAT Inc. VAT ex. VAT Inc. VAT

24774 175mm 1.7L €8.38 €10.30 €4.95 €6.0924771 230mm 3.0L €10.54 €12.96 €6.20 €7.63

SP4

FUEL SIPHON PUMP• Hand-operated siphon pump suitable for transferringdiesel, petrol, water and other inert liquids

• Siphon bulb with one-way valve and barbed connectorson each end suitable for 3/8" I/D plastic flexible pipe

• Two 900mm long flexible plastic transparent pipessuitable and approved for use with petroleum-basedfluids nominally 3/8" I/D x 2mm wall thickness with onemetal spring clip each end

Stock No.43904


*TSP € 11.10 *TSP € 13.65

54

3/8" Sq. Dr. OIL FILTER CAP SOCKETS• Expert Quality • Chrome vanadium steel hardened and tempered and chrome

plated for corrosion protection• For use with popular paper cartridge systems

Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT

13425 27mm €10.87 €13.37 €7.40 €9.1013430 32mm €10.87 €13.37 €7.40 €9.1013449 36mm €13.58 €16.71 €9.15 €11.2513450 38mm €14.23 €17.51 €9.60 €11.81

DDPK/SET10 PIECE 3/8" Sq. Dr. DRAIN PLUGKEY SET• 8 assorted plug key sizes, socket retaining bar and

sliding tee bar• Fits most modern vehicles

Stock No.38329


*TSP € 21.60 *TSP € 26.57

SF1

OIL FUNNEL• Holds square and rectangular oil bottles• Aids efficient emptying

Stock No.46598


*TSP € 2.50 *TSP € 3.08



OFCS/SET13

13 PIECE 3/8" Sq. Dr. OIL FILTER CUPSOCKET SET• Expert Quality • Comprehensive set

suitable for mostcommon sizes ofoil filters fitted toa variety ofEuropean carmarques

• Comprises 11different diameter

sockets, 1/2" (F) x3/8" (M) adaptorand a 3/8" sq. dr.three leg oil filterwrench

Stock No.40104


*TSP € 51.00 *TSP € 62.73

OFCS/SET15

15 PIECE 3/8" Sq. Dr. OIL FILTER CUPSOCKET SET• Expert Quality • Comprehensive set

suitable for mostcommon sizes ofoil filters fitted to avariety of popularAmerican,European and FarEastern carmarques

• Comprises 14

different diametersockets and 1/2"(F) x 3/8" (M)adaptor

Stock No.40105


*TSP € 42.60 *TSP € 52.40

drain plug keys

63476 HDPK1 €10.54 €12.96 €6.90 €8.49

38321 DDPK2 €3.62 €4.46 €2.40 €2.95

38322 DDPK3 €3.62 €4.46 €2.40 €2.95

38323 DDPK5 €3.62 €4.46 €2.40 €2.95

38324 DDPK6 €3.62 €4.46 €2.40 €2.95

38325 DDPK7 €3.62 €4.46 €2.40 €2.95

38326 DDPK8 €3.62 €4.46 €2.40 €2.95

38327 DDPK9 €3.62 €4.46 €2.40 €2.95

38328 DDPK10 €3.62 €4.46 €2.40 €2.95

Stock Part List Price List Price *TSP *TSPNo. No. Description ex. VAT inc. VAT ex. VAT inc.VAT

1/2" Sq. Dr. Audi/VW Drain Plug KeyExpert Quality, for use on the tamperproof plug ontransmission/gearboxes of VW/Audi vehicles. Display packed.

8mm - 5⁄16" Hexagon 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.Vehicle Applications:BMW: Back Axle; Ford CVH: Gearbox;GM (Vauxhall/Opel): Back Axle & Gearbox

11mm Square 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.Vehicle Applications:Ford (except CVH): Back Axle & Gearbox

17mm Hexagon 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.Vehicle Applications:{Audi: Gearbox; Rover Group (Austin): GearboxBMW: Gearbox;Volkswagen: Gearbox

8mm Square 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.

Vehicle Applications:{Citroën: Gearbox & Sump; Peugeot: Back Axle, Gearbox & SumpRenault: Sump;Talbot: Gearbox & Sump; Volvo: Sump

3/8" Square 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.Vehicle Applications:{Honda: Gearbox & Sump; Mazda: Back Axle & GearboxRenault: Gearbox & Sump; Saab: GearboxVolvo: Back Axle & Sump

12mm Hexagon 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.Vehicle Applications:{Fiat: Sump; Lancia: Gearbox & SumpPeugeot/Talbot: Back Axle, Gearbox & Sump

14mm Hexagon 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed

Vehicle Applications:Lancia: Gearbox & Sump; Mercedes: Back Axle ,Gearbox & Sump

10mm Hexagon 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packedVehicle Applications:Ford Sierra: Back Axle


FP1

DIESEL FUEL/FLUID TRANSFER PUMP• Designed for the transfer of diesel fuel, paraffin and

liquids with high flashpoints (not petrol)• Powered by a 12V or 24V lead acid battery (sold

separately) • Pumps 30L/min using 12V battery,37L/min using 24V battery

• 4M hose (approx.)with delivery gun

Stock No.65673


*TSP € 275.95 *TSP € 339.42



...lighting

56

GREEN STEEL FUEL CANS • Green used for Unleaded Fuel


49957 5L €38.45 €47.29 €22.75 €27.9849952 10L €48.43 €59.57 €27.85 €34.2649949 20L €55.03 €67.69 €32.40 €39.8549946 Spout €17.88 €21.99 €13.15 €16.17

BLACK STEEL FUEL CANS • Black used for Diesel Fuel


No. Size ex. VAT Inc. VAT ex.VAT Inc.VAT49956 5L €38.45 €47.29 €22.75 €27.9849954 10L €48.43 €59.57 €27.85 €34.2649948 20L €55.03 €67.69 €32.40 €39.8549945 Spout €17.88 €21.99 €13.15 €16.17

RED STEEL FUEL CANS • Red used for leaded Fuel


49955 5L €38.45 €47.29 €22.75 €27.9849953 10L €48.43 €59.57 €27.85 €34.2649951 20L €55.03 €67.69 €32.40 €39.8549947 Spout €17.88 €21.99 €13.15 €16.17

230V LED WORKLAMPS• Two-piece frame construction with

tilt and lock facility

• Supplied with 1.8M (approx.) cableand approved plug

• Manufactured to IP54 Specificationssuitable for external use


07180 28 LED €24.70 €30.38 €23.95 €29.4607181 45 LED €32.76 €40.29 €31.80 €39.11

IL512V 24W HEAVY DUTYHANDLAMP WITH ON/OFFSWITCH• Expert Quality • Swivelling steel clamp, on/off switch, steel

reflector, nitrile steel and domed polycarbonatelens and impact resistant rubber handle

• Supplied with 7.25M of stripped cableand 24W bulb

• Manufactured to BS EN 60598-1:2000

Stock No.61299


*TSP € 24.75 *TSP € 30.44

574A230V INSPECTION LAMP• Reflective head with hang up hook• Supplied with 6M (approx.) cable and approved plug.• Max. 60W Eddison screw bulb (sold separately)

Stock No.73528


*TSP € 12.44 *TSP € 15.30

IL8-PRO8W 230V FLUORESCENTINSPECTION LAMP• Expert Quality • IP64 rated • Hydro-carbon-

resistant prismatic tube casing for maximum lightoutput • Hexagonal handle and cap bolsters to prevent‘roll-away’ when using • Encapsulated tube for easychanging and prevents glass splinters if dropped

• Useful hang up hook and supplied with 5M (approx.)cable and approved plug • Spare tubes

available

Stock No.08290


*TSP € 35.95 *TSP € 44.22

RIL27ERECHARGEABLE MAGNETIC 27 LEDINSPECTION LAMP• Expert Quality • Heavy duty plastic with magnetic

strip on the back, rubber bumper to prevent damageand hang up hook • Gives up to five hourscontinuous working time between charges

• Maximum charging time three hours• Length: 320mm • Supplied with BS

approved 3 pin 230Vcharger

Stock No.40897


*TSP € 42.25 *TSP € 51.97

steel fuel cans

All the fuel cans are available with coloured fuel delivery spouts.

These are purchased separately from the can.

See the individual table for ordering information.

UNLEADED

FUEL

LEADED

FUEL

DIESEL

FUEL

Patented cap locking system keeps thecontents secure.Manufactured from highstrength 0.9mm sheet steel. Bayonet capclosure device ensures can is leakproof in any position.Wide channel breather

for smooth,“noglug”steadypouring. For

flammableliquids only.



FWL48

48W 230V FLUORESCENTWORKLAMP• Expert Quality • Ultra-tough outer shell with

handle, feet and front lenswith reflector formaximum light output

• Two power tool socketsallowing users to plugin 2000W 230V powertool directly into theworklamp

• Fitted with 5M(approx. ) of cableand approved plug

• Size : 290 x425mm (approx.)

Stock No.07178


*TSP € 81.50 *TSP € 100.25

RIL60RECHARGEABLE 60 LED INSPECTIONLAMP• Heavy duty plastic with useful hang up hook• Gives up to five hours continuous working time

between charges• Maximum charging time three hours• Length: 425mm

• Supplied with BS approved 3 pin 230Vcharger and a 12V DC charger with

vehicle cigarette lighter plug

Stock No.40898


*TSP € 28.98 *TSP € 35.65

RIL30/RB

30 LED SOFT GRIP RECHARGEABLEINSPECTION LAMP• Expert Quality • Clear polycarbonate lens with soft

grip handle • Rechargeable 3.7V Li-ion battery packwthin the handle • Gives up to six hours continuousworking time between charges • Maximum charging

time four hours • Battery charge lindicatorlevel indicator • Length: 355mm

Stock No.04976


*TSP € 41.40 *TSP € 50.92

RIL60/RB

60 LED SOFT GRIP RECHARGEABLEINSPECTION LAMP• Expert Quality • Clear polycarbonate lens with soft grip handle• Rechargeable 7.4V Li-ion battery pack wthin the handle• Gives up to four hours continuous working time

between charges • Maximum chargingtime four hours

• Battery charge lindicatorlevel indicator

• Length: 450mm

Stock No.04977


*TSP € 56.35 *TSP € 69.31

RIL36

RECHARGEABLE 36 LED WORKLIGHT• Heavy duty plastic with useful hang up hook• Gives up to three hours continuous working time

between charges• Maximum charging time six hours• Length: 255mm• Supplied with BS approved 3 pin 230V charger and a

12V DC charger with vehicle cigarette lighter plug

Stock No.02583


*TSP € 30.60 *TSP € 37.64

AHT/CLED

CREE 1 LED TORCH(3 x AAA BATTERIES)• Expert Quality • The Cree LED produces a smooth clear beam of

brilliant white light of 90-100 lumens• Aluminium with on/off switch and wrist strap• Focusing function from beam to

spot light• Uses 3 x AAA size

batteries (soldseparately)

HL7CREE 1 LED HEAD LAMP(3 x AAA BATTERIES)• The Cree LED produces a smooth clear beam of brilliant

white light of 90-100 lumens • Uses 3 x AAA sizebatteries (sold separately)

• Expert Quality , with adjustable headpositioning and strapswith foam pad toprevent chafing to theforehead • Suitablefor hands-free work

in dark areas

FWL21

21W 230V FLUORESCENT

WORKLAMP• Expert Quality • Ultra-tough outer shell

with handle, feet andfront lens with reflectorfor maximum lightoutput • Power toolsocket on unit allowsusers to run a 230Vpower tool up to1500W directly fromthe worklamp

• Fitted with 1.8M(approx. ) of cableand approved plug

• Size: 230 x 230mm(approx.)

Stock No.07176


*TSP € 42.60 *TSP € 52.40

FWL38

38W 230V FLUORESCENT

WORKLAMP• Expert Quality • Ultra-tough outer shell

with handle, feet andfront lens with reflectorfor maximum lightoutput • 38Wfluorescent tube

• Power tool socketallows users to plugin a 1500W 230Vpower tool directlyinto the worklamp

• Fitted with 1.8M(approx. ) of cableand approved plug

• Size: 270 x 280mm(approx.)

Stock No.07177


*TSP € 47.95 *TSP € 58.98

CREE LIGHTING STANDARD LIGHTING

CREE LED LightingThe Cree LED (Fig. 1.) is the industry’s brightest,highestperformance lighting-class LED which produces a highspectrum of white light. Draper Tools has incorporatedthese top-of-the-range LED’s into it’s range.

Stock No.07191


*TSP € 18.60 *TSP € 22.88

Stock No.07192


*TSP € 16.20 *TSP € 19.93



...grease guns and pumps

58

A7/L500CC GREASE GUN• Lever action gun for use with standard grease gun

cartridges and bulk• Supplied with delivery tube, connector with 1/8" BSPT

threads and pressure relief valve• Safe working pressure 55MPa (8000psi)



*TSP € 11.99 *TSP € 14.75

A1/EXP/L

PROFESSIONAL HEAVY DUTYPISTOL-TYPE GREASE GUN• Expert Quality • Diecast head and port for air bleeder/bulk loader for

single handed operation.• Supplied with coupler and 230mm high pressure hose

to DIN1283e• Safe working pressure 40MPa (5800 psi)



*TSP € 35.95 *TSP € 44.22

A5/L500CC OIL SUCTION GUN• For use on vehicles and machinery such as gearboxes,

axles, etc.• Complete with flexible delivery tube 10mm bore



*TSP € 11.10 *TSP € 13.65

GP-HV

HIGH VOLUME HAND GREASE PUMP• Expert Quality • Portable hand-operated lever grease pump providing

high pressure greasing where power is not available• High grease output, four times more efficient

per stroke (4g) at 27MPa (4000psi)• Supplied with drum cover,

2M of 1/4" I.D. highpressure rubber hose

fitted with high quality steelconnector and greasecoupler, and 10kg capacitysteel grease bucket

• Suitable for use withgrease up to NLGI 3

Stock No.43960


*TSP € 89.95 *TSP € 110.64

GNA-BSPT50 ASSORTED BSPT GREASENIPPLES• Contents (approx.): 10 x 1/4" BSPT straight; 5 x 1/4"

BSPT 45°; 5 x 1/4" BSPT 90°; 20 x 1/8" BSPT straight; 5x 1/8" BSPT 45°; 5 x 1/8" BSPT 90°

• EN-1A stee lwith profiles toBS, SAE, DIN.

JIS and IS• Heat treated toSAE J534 andhardened

• Yellow zincplated to ASTMB117specification

Stock No.43961


*TSP € 15.50 *TSP € 19.07

GNA-M

70 ASSORTED METRIC GREASENIPPLES• Contents (approx.): 20 x M6 straight; 10 x M6 90°; 15 x

M8 straight; 5 x M8 90°; M10 straight; 10 x M10 90°• EN-1A steel with

profiles to BS,SAE, DIN. JISand IS

• Heat treated toSAE J534 andhardened

• Yellow zincplated to ASTMB117specification

Stock No.43962


*TSP € 15.50 *TSP € 19.07

FORCE FEED OIL CANS• Supplied with flexible and

interchangeable rigid spout

Stock List Price List Price *TSP *TSPNo. Capacity ex. VAT Inc. VAT ex.VAT Inc.VAT

21716 125ml €9.58 €11.78 €6.20 €7.6321717 200ml €9.89 €12.16 €6.50 €8.0021718 300ml €11.26 €13.84 €7.15 €8.7921719 500ml €13.78 €16.94 €8.60 €10.5821720 700ml €15.34 €18.86 €9.30 €11.44

MEASURING JUGS• Resistant to diesel/petrol, oils

and most acids• Flexible spout with carrying

handle and screw top lid.• Metric and US imperial

graduations on jug body

Stock List Price List Price *TSP *TSPNo. Capacity ex. VAT Inc. VAT ex.VAT Inc.VAT

43963 1L €7.87 €9.68 €4.95 €6.0943964 3L €11.95 €14.70 €6.90 €8.4943965 5L €18.43 €22.67 €9.90 €12.18



PLPPLASTIC LEVERPUMP• Lever pump with anti-siphon

capable of delivering 500mlper full stroke

• Fitted with Viton® pump seals• Two piece variable length

detachable suction tube for useon 50 - 205L

• For use with non-aggressiveliquids eg: detergents, soaps, anti-freeze, windscreen wash, hydraulic

oils, lubricants, herbicides andpesticides

• Supplied with detachable dispensingspout approx 2200mm long

• Not suitable for fuel transfer,thinners, solvents or anyflammable liquids

Stock No.13381


*TSP € 62.40 *TSP € 76.75

WBSDPSIPHON DRUM PUMP• Simple pump action siphon transfers

liquids to lower levels than the pump’sinstallation height

• Capable of delivering a maximum flowof 22L per minute, for use with water-based liquids eg: soaps, anti-freeze,waxes and detergents etc.

• Supplied with rigid suction tube for usewith 50-205L barrels, detachable flexiblecorrugated discharge hose 2M long(approx.) x 19mm dia. and 50mm screw

bung• Not suitable for use with concentrated acids,acetone, benzene or any flammable liquids

Stock No.13420


*TSP € 11.99 *TSP € 14.75

BP/LLEVER ACTIONBARREL PUMP• For use with steel

barrels capacity 100-205L max

• Telescopic suction tube(supplied) to reachbottom of barrel

• For use with petroleum-based liquids only

Stock No.47808


*TSP € 24.20 *TSP € 29.77

Viton® is a registeredtrademark of DuPontPerformance Elastomers UK

TWIN LEG REVERSIBLE PULLERS (A) • For external and internal pulling of gears, bearings, etc

Stock Max. Max. List Price List Price *TSP *TSPNo. Reach Spread ex. VAT Inc. VAT ex. VAT Inc. VAT

13906 65mm 75mm €21.19 €26.07 €12.30 €15.1313907 102mm 110mm €25.03 €30.79 €15.80 €19.4343923 165mm 160mm €45.29 €55.70 €26.85 €33.03

TRIPLE LEG REVERSIBLE PULLERS (B) • Three reversible legs for external and internal pulling of gears,

bearings, etc

Stock Max. Max. List Price List Price *TSP *TSP

No. Reach Spread ex. VAT Inc. VAT ex. VAT Inc. VAT13908 65mm 75mm €28.49 €35.04 €18.50 €22.7613909 102mm 110mm €36.14 €44.46 €20.10 €24.7243949 165mm 160mm €57.62 €70.88 €32.70 €40.22

TWIN/TRIPLE REVERSIBLE PULLERS (C) • Three reversible legs for internal and external pulling

Stock Max. Max. List Price List Price *TSP *TSPNo. Reach Spread ex. VAT Inc. VAT ex. VAT Inc. VAT

25994 78mm 100mm €47.47 €58.39 €27.00 €33.2156177 150mm 100mm €48.26 €59.36 €27.85 €34.26

(A)

(B)

(C)

BRK9 PIECE BLIND BEARINGREMOVAL KIT• Expert Quality • Contents: slide hammer 390mm long and eight

expandable split collets size: 8, 10, 12, 15, 17, 20, 25and 30mm diameter

• For pull ingbearings from ablind hole in anengine ortransmission case

• Saves time andfrustration inpulling bearingsthat areaccessible fromonly one sideand cannot bepushed out

Stock No.04470


*TSP € 132.30 *TSP € 162.73

IBP1SMALL INSERT BEARING PULLER• Expert Quality • Allows the removal of bearings where normal pullers

are unable to be used• Locks into the bearing

race itself• Manufactured from

hardened and temperedsteels chemically blackedfor corrosion protection

• Suitable for use with ISObearing sizes: 6004-6010; 6299-6205 and6300-6302. Packed inblow moulded casewith display sleeve

Stock No.43137


*TSP € 42.60 *TSP € 52.40

PWPK3V-BELT PULLEY WHEEL REMOVAL SET• Expert Quality

• Contents: small straight leg puller: max. reach 20mm;max spread 110mm; largestraight leg puller: max.reach 35mm; max spread200mm; 2 cranked pullerlegs (can be used witheither yoke)

• For the removal of V-beltpulley wheels

• Sculpted grooves on faceof puller allow the legs tolock on to outercircumference of the V-belt for easy removal

Stock No.30805


*TSP € 114.35 *TSP € 140.65

twin/triple leg pullers Legs are forged carbon steel andhave long and short reach facility

suitable for usewith AdBlue



BPKBEARING, SEAL AND BUSHINSERTION/EXTRACTION KIT• Expert Quality • For the accurate and

controlledinsertion/removal ofnormal bearings,silent bearings,hydraulic bearings,rubber bearings,bearing bushes, shaftseals etc.

• Comprises 20 adaptorrings and four finethread puller barswith ball bearing

hex. nut ends.

Stock No.30816


*TSP € 326.35 *TSP € 401.41

AFWPS113 PIECE ALTERNATORPULLEY TOOL KIT• Expert Quality • For the removal of alternators and freewheel pulleys

either on or off the engine of most popular Europeancar marques

Stock No.09538


*TSP € 39.90 *TSP € 49.08

BSD/SET

10 PIECE BEARING ANDSEAL DRIVER SET• Contents: aluminium

mandrel drive and 9flanges sizes 39.5 -81mm

• For installation ofbearings and seals

• Helps avoiddamage to bearingand seal faces

Stock No.56637


*TSP € 47.95 *TSP € 58.98

HPK

10 TONNE HYDRAULIC PULLER KIT• Six position multi-function puller with adjustable two or

three leg function• Allows bearings, gears etc to be removed with minimal

effort by the use of the hydraulic puller• Min/Max Reach: 0 - 150mm• Min/Max Spread: 100 - 240mm

Stock No.50094


*TSP € 89.99 *TSP € 110.69

1500kg COIL SPRING COMPRESSOR• Expert Quality • Designed for safe and effective compression of suspension springs to allow

removal and replacement of the damper units• A safety cage is available separately for minimizing the risk when working on

suspension systems servicing(Stock No. 03053).

Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT

03054 Compressor €486.70 €598.64 €451.20 €554.9803053 Safety Cage €253.08 €311.29 €196.50 €241.70

IPB2

LARGE INSERT BEARING PULLER• Expert Quality • Allows the removal of bearings where normal pullers

are unable to be used• Locks into the bearing race itself• Manufactured from hardened and tempered steels

chemically blacked for corrosion protection• Suitable for use with ISO bearing sizes: 6207-6011;

6305-6308 and 6403-6405

Stock No.43136


*TSP € 59.65 *TSP € 73.37

HSHK

HYDRAULIC HUB PULLER ANDSLIDE HAMMER KIT• Expert Quality • Ten slot hub adaptor plate fits any hub bolt layout• Powerful 12 tonne hydraulic ram for the precise

removal of hub assembly• 2.8kg slide hammer for the removal of stubborn hubs

where controlled pressure is not required

Stock No.04471


*TSP € 211.15 *TSP € 259.71


Draper TX-STAR products are compatible with †Torx fixing systems. †Torx is the registered trademark of Camcar/Textron Inc.

Suppliedwith two jawsets size 80-145mm and145-195mm

Features safety overloadsystem to protect user

and spring compressor

picture above showscoil spring

compressor in safetycage (safety cagesold separately)

Manufacturedfrom highqualityrobustmaterialsfor longevity



N1442 PIECE COIL SPRINGCOMPRESSOR SET• Length: 250mm • Capacity: 190mm• Hooks manufactured from tension ductile iron with

galvanized finish

Stock No.14173


*TSP € 19.75 *TSP € 24.29

N151

3 PIECE COIL SPRINGCOMPRESSOR SET• Hardened and tempered carbon lead screw • Cast steel

claws with safety hooks to prevent accidental release •Suitable for most cars and light vans • Reversible forleft or right handed use

Stock No.68614


*TSP € 34.50 *TSP € 42.44

N142UNIVERSAL HUB PULLER• For use on four stud wheels• Bolt centres 100-115mm

Stock No.13916


*TSP € 7.40 *TSP € 9.10

N150

BALL JOINT SEPARATOR• Expert Quality • Adjustable jaw opening 19-22mm

• Maximum opening capacity 38mm

Stock No.63770

EX. VAT INC VAT


*TSP € 19.95 *TSP € 24.54

N140BALL JOINT SEPARATOR• Jaw opening 19mm, maximum opening capacity 38mm• Length: 140mm

Stock No.13914

EX. VAT INC VAT


*TSP € 14.60 *TSP € 17.96

N143FORK TYPE BALLJOINT SEPARATOR

Stock No.14159


*TSP € 8.10 *TSP € 9.96

N148

FORK TYPE BALL JOINT SEPARATOR

• Jaw opening 19mm and throat depth 70mm• Length 400mm

Stock No.38859


*TSP € 10.85 *TSP € 13.35

TRRTTRACK ROD REMOVAL TOOL• Expert Quality for the easy removal and installation

of track rod end knuckle • 35-45mm diameter ball joint

capacity with driving end of 1/2" sq. dr. (inner) and27mm hex. (outer) • 400mm internal sleeve length.Handle knurled for extra grip

Stock No.04469

EX. VAT INC VAT


*TSP € 71.95 *TSP € 88.50

CVBTCV BOOT TOOL• Allows the user to renew the

CV boot of a vehicle withoutdismantling the CV joint

• Length: 330mm

Stock No.54680


*TSP € 8.75 *TSP € 10.76

CVBK3

3 PIECE CV BOOT SERVICE KIT• Expert Quality • Contents: 200mm precision CV boot band

cutters for use on CV bands up to 6mm wide; 225mm CVband cutting tool; 240mm CV pliers for tightening ear-type CV bands • Reinforced 1/2" sq. dr. recesses inhandle for the use of a breaker bar/ torque wrenchwhere specific torque is required

• Jaw opening 19mm andthroat depth 70mm

• Length 200mm

ball joint separators

Stock No.30784


*TSP € 53.85 *TSP € 66.24



PW5A

FOUR WAY WHEEL NUT WRENCH• Heavy duty forged four way wheel nut wrench• Sizes:17 x 19 x 21 x 22mm



*TSP € 7.75 *TSP € 9.53

WM17/19

EXTENDING WHEEL NUT WRENCH• Supplied with two 1/2" sq. drive reversible sockets

size 17 x 19 and 21 x 22mm• Handle extends to 525mm which helps to increase

torque on difficult wheel nuts



*TSP € 15.98 *TSP € 19.66

LWNS4

4 PIECE LOCKING WHEEL NUT SET• Expert Quality • For the removal of locking wheel

nuts on most vehicles (except those fitted withrotating protector shrouds) • Molybdenum steel,hardened,tempered andchemicallyblacked forcorrosionprotection

• Reduce taperedinternal lefthand coarsethread



*TSP € 23.70 *TSP € 29.15

TG2

DIGITAL TYRE TREAD DEPTH GAUGEWITH STAINLESS STEEL BODY• Expert Quality • Measuring range 0-25mm/0-1"; resolution

0.05mm/0.0005"; accuracy ±0.01mm/0.000

Stock No.39591


*TSP € 18.50 *TSP € 22.76

TG1

DIGITAL TYRE TREAD DEPTH GAUGEWITH PLASTIC BODY• Measuring range 0-25mm/0-1"; resolution

0.1mm/0.0005"; accuracy ±0.01mm/0.000

Stock No.39590


*TSP € 9.30 *TSP € 11.44

TG92TYRE TREAD DEPTH GAUGE• Accepted in the UK by the Department of Transport for

MOT Testing• Fast and easy-to-read measurement of tyre tread depth

from 1-26mm in one millimetre graduations on slidingbarrel

• Includes a 1.6mm graduation to comply with MoTminimum tyre tread depth requirement

• Plated steel body with pocket clip

Stock No.27298


*TSP € 3.80 *TSP € 4.67

TPG100ATYRE PRESSURE GAUGE• Manufactured to EN12645:1998 Standard • Hand-

held dual reading gauge with flexible hose 250mmlong • Swivel angled tyre connection with air releasevalve • Large easy-to-read scale graduated 5-100psiin increments of two psi and 0.5-6bar in incrementsof 0.1 bar

Stock No.69924


*TSP € 10.53 *TSP € 12.95

30KTYRE PRESSURE GAUGE• Manufactured to BS4613 Part 3 Specification• Dual reading pencil type, graduated 6-50 psi in

increments of one psi and 0.4-3.4 bar in increments of0.1 bar

• Includes tyre valve remover

Stock No.74308


*TSP € 8.35 *TSP € 10.27

tyre and wheelWhether it’s wheel removal,replacement or balancing;these tools should help.Also here are depth gauges,pressure gauges,tyre valve repair tools and an ‘all in one’ tyre service kit.All Draper tools are fully guaranteedto give you complete peace of mind.

Metric and imperial graduations

with push button conversionbetween the two. Zero settingcontrol allows for comparativemeasurement.Clear LCD for easyreading. Supplied with SR44 battery.

tyre treaddepth gauges



Stock No.26443


*TSP € 8.35 *TSP € 10.27

DTG1

DIGITAL TYRE PRESSURE GAUGE• Expert Quality • Range 2.0-99.5psi, 0.15-7.00 bar and 15-700kPA• Low power consumption with automatic shut off• Powered by a 3V lithium battery (supplied)

Stock No.73183


*TSP € 11.99 *TSP € 14.75

TPMSS4 WAY TPMS TOOL• Expert Quality ,• For the removal and

installation of Tyre PressureMonitoring System (TPMS)units on wheels

Stock No.03323


*TSP € 4.75 *TSP € 5.84

TV100TYRE VALVEREPAIR TOOL• Cleans internal

and external valvestem threads andremoves valve

cores

Stock No.11502


*TSP € 2.95 *TSP € 3.63

TSK23 PIECE TYRE SERVICE KIT• Comprising Tyre Tread Depth Gauge, Tyre Pressure

Gauge (to BS4613 Part 3Specification) and TyreValve Repair Tool

Stock No.27683


*TSP € 14.35 *TSP € 17.65

WWP1250mm WHEEL BALANCE WEIGHTPLIERS• For fitting, removing and cutting vehicle wheel weights• Overall length: 250mm

Stock No.56748


*TSP € 11.99 *TSP € 14.75

MR-DS

400ml Mr D’s MOISTUREDISPERSANT (E)• Dual purpose moisture and penetrating oil, suitable

for dispersing moisture from electrical systems andas a general lubricating and penetrating oil

Stock No.41921


*TSP € 4.30 *TSP € 5.29

ARE-BCL/A

400ml BRAKE & CLUTCH CLEANER (D)• Ideal for cleaning all parts of modern brake and

clutch systems • Eliminates brake squeal and clutchslip caused by contamination and glazing

Stock No.41925


*TSP € 4.30 *TSP € 5.29

ARE-CCL/A

400ml CARBURETTOR AND INJECTORCLEANER (B)• Ideal for cleaning carburettors and and brake parts• Helps prevent stalling and rough idling

Stock No.41922


*TSP € 4.30 *TSP € 5.29ARE-ACC150ml VEHICLE AIR CONDITIONINGCLEANER (A)• A quick and easy way to clean and refresh vehicle

air conditioning systems in minutes • Kills bacteriapresent in the air conditioning unit • Aerosol can isplaced in footwell of vehicle, air conditioning isturned on ‘internal circulation’ and can locked onand completely discharged whilst air conditioningis working

Stock No.76107


*TSP € 7.15 *TSP € 8.79

ARE-LEAK

400ml LEAK DETECTOR (C)• For detecting leaks in gas piping, refrigerator coolant

pipes, vehicle air conditioning units, workshop airlines etc. • When sprayed, any leaks and theirseverity are betrayed by bubbles within the surfacetension of the fluid

Stock No.76110


*TSP € 3.85 *TSP € 4.74

31K

TYRE PRESSURE GAUGE• Expert Quality • Dual reading graduated 6-50 psi in increments of one

psi and 0.4-3.4 bar in increments of 0.1 bar• Manufactured to BS4613 Part 3 Specification• In line feature allows access to awkwardly positioned

tyre valves • Valve remover andpocket clip

Cleaning andmaintenance

Aerosols

(A) (B) (C) (D) (E)



FUSE/120120 PIECEAUTOMOTIVE FUSEASSORTMENT• 20 pieces (approx.) of colour fuses

5A, 10A, 15A, 20A, 25A and 30A

Stock No.56381


*TSP € 10.50 *TSP € 12.92

WASHER/720720 PIECE SPRING ANDSTAR WASHER ASSORTMENT• Assortment of spring, internal and external star

washers in plastic storage case

Stock No.56378


*TSP € 11.10 *TSP € 13.65

Stock No.63941


*TSP € 13.50 *TSP € 16.61

HAIRP/150150 PIECE R-CLIPASSORTMENT• 150 pieces (approx) of popular size R-clips

Stock No.56376


*TSP € 14.75 *TSP € 18.14

SPRING/

200200PIECECOMPRESSION ANDEXTENSION SPRING ASSORTMENT• 92 (approx) compression springs• 108 (approx) extension springs

Stock No.56380


*TSP € 10.50 *TSP € 12.92

ROLL/120120 PIECE ROLL PIN ASSORTMENT• Popular imperial sized roll pins• Plastic storage case

Stock No.63943


*TSP € 7.70 *TSP € 9.47

HST9595 PIECE HEATSHRINK TUBEASSORTMENT

• For sealing automotive electrical connections• To be used in conjunction with hot air guns

Stock No.72878


*TSP € 8.65 *TSP € 10.64

O-RING/419419 PIECEO-RING ASSORT-MENT

• Assortment

of popular sizeO-rings

Stock No.56345


*TSP € 21.00 *TSP € 25.83

O-RING/225225 PIECE O-RINGASSORTMENT• Assortment of popular size O-rings

Stock No.56377


*TSP € 10.50 *TSP € 12.92

Stock No.56375


*TSP € 9.85 *TSP € 12.12

COTTER/555

555 PIECE SPLITPIN ASSORTMENT• Assortment of popular size split pins

Stock No.56379


*TSP € 16.10 *TSP € 19.80

CIRCLIP/285285PIECEINTERNALANDEXTERNALCIRCLIPASSORTMENT• Assortment of internal and external

circlips in plastic storage case

E-CLIP/300300 PIECE E-CLIP ASSORTMENT• 300 (approx) popular metric sized E-Clips• Plastic storage case

Assorted AssortmentsFrom Fuses and Springs to O-rings and Split Pins,this is such auseful collection...



RTDS25A4

PACK OF FOUR 4.5M x 25mm TIEDOWN STRAPS• Quality polyester webbing with cam locking buckle• S.W.L. 375kg (proof load 750kg) per strap

Stock No.45279


*TSP € 20.00 *TSP € 24.60




*TSP € 19.92 *TSP € 24.50

VV2

LONG HANDLE WASHING BRUSH• Soft bristles with a lightweight plastic handle• Overall length 490mm

Stock No.44247


*TSP € 4.20 *TSP € 5.17

50mm WIDE HEAVY DUTY RATCHETTIE DOWN STRAPS WITH HOOKS• Quality polyester webbing with hooks• S.W.L. 2500kg (breaking strain 5000kg) per strap

Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT

49488 5M €27.58 €33.92 €15.60 €19.1949489 8M €33.53 €41.24 €19.50 €23.9949490 10M €37.22 €45.79 €21.60 €26.57

1071

3 PIECE HEAVY DUTYSOFT GRIP PLIERS SET• Expert Quality • Contents: Combination Pliers, Long Nose Pliers and

Diagonal Side Cutters

Stock No.69289


*TSP € 28.40 *TSP € 34.93

IT32-EVA

8 PIECE PLIERS SET IN EVA FOAMINSERT TRAY• Contents: long nose pliers, diagonal side cutters,

waterpump pliers, straight tip internal circlip pliers, 90°tip internal circlip pliers ,straight tip external circlip

pliers; 90° tip external external circlip pliers• Foam size: 420 x 260 x 40mm

Stock No.49406


*TSP € 101.95 *TSP € 125.40

WWB1

FLOW THROUGH TELESCOPIC WASHING BRUSH• For cleaning vehicles, paintwork, conservatories etc• Has on/off water control feature and snap-on connector• Extends from 1.2 to 1.8M

Cleaning brushes and waxed duster

Stock No.44249


*TSP € 9.50 *TSP € 11.69

VV4LARGE FLAT MOP/VEHICLEWAXED DUSTER• Length: 600mm

Pliers in EVAFoam Insert TrayThese great pliers are supplied in ahandy Eva Foam Tray - these traysallow neat and tidy storage in toolchests and cabinets.


http://slidepdf.com/reader/full/wrkshp1-2012-eur-promocion-workshop-booklet-1-draper-2012-wwwherraproes 66/120*Typical Selling Price - may vary in-store.66

2/36ALG

2 PIECE LONG REACH LONG NOSEPLIERS SET• Contents: Long Reach Long Nose Pliers and Bent Nose

Long Reach Long Nose Pliers with 45° jaws• PVC dipped handles• Forged carbon steel correctly hardened and tempered

with cutting edges additionally induction hardened• Serrated tapering jaws allow work in confined spaces

Stock No.69287


*TSP € 16.75 *TSP € 20.60

4001A400mm CUSHION GRIPWATERPUMP PLIERS• Expert Quality • Capacity: 110mm• ‘no-nip’ feature which prevents handles locking together

when at largest capacity and damaging users’ hands• 11 position groove joint jaw

Stock No.52408


*TSP € 22.20 *TSP € 27.31

49/44 PIECE CIRCLIP PLIERS SET• Contents: 2 x straight and 2 x 90° tips• Capacity 19-60mm

Stock No.38999


*TSP € 41.25 *TSP € 50.74

9006/33 PIECE CURVED JAW SELF GRIPPLIERS SET• Contents: 140, 190 and 220mm long• Serrated gripping surfaces and adjustable opening with

quick release lever

Stock No.14040


*TSP € 15.44 *TSP € 18.99

RCT220mm RATCHET CRIMPING TOOL• Expert Quality • Suitable for crimping insulated terminals as

follows:- red channel: 0.5-1.00mm2, blue channel:1.5-2.5mm2 and yellow channel: 4.0-6.0mm2

• Continuous crimping at preset tension ensuresaccurate crimp

Stock No.35574


*TSP € 19.95 *TSP € 24.54

CT-K/PRO220mm RATCHET CRIMPING KIT• Expert Quality • Ratchet action ensures continuous operation• 590 (approx) assorted insulated crimping terminals

included • Metal storage case

Stock No.56383


*TSP € 68.35 *TSP € 84.07

CT5

240mm 5 WAY CRIMPING TOOL• Crimps insulated and non-insulated terminals• Wire cutting• Wire stripping up to 6mm• Shears bolts up to 5mm

Stock No.13656


*TSP € 6.20 *TSP € 7.63

2850250mm COMPOUND ACTION TINMANS(AVIATION) SHEARS• Expert Quality • Straight cut chrome molybdenum steel compound action

blades which increase leverage, serrated for extra grip• Straight cut• Capacity 1.2mm mild steel, 1.5mm aluminium and 0.8mm

stainless steel

Stock No.49905


*TSP € 9.30 *TSP € 11.44

Crimping tools

Compound

action tinmansshears



PS141111 PIECE PRECISIONSCREWDRIVER SET• Expert Quality • Contents: 2 plain slot, 2 cross slot,

2 PZ TYPE and 5 Draper TX-STAR • Nylon handles withrevolving tops • Supplied with wall rack

67

268AKTWO WAY RIVETER KIT• Accepts 2.4, 3.2, 4.0 and 4.8mm aluminium alloy blind

rivets• 90° or 180° operation

Stock No.19782


*TSP € 17.30 *TSP € 21.28

270ARIVETER• Expert Quality • Four nozzles to accept 2.4, 3.2, 4.0 and 4.8mm

aluminium alloy, stainless steel and steel blind rivets• Single pull action designed for fast repetitive

applications

Stock No.13701


*TSP € 38.20 *TSP € 46.99

450mm EXTRA LONG PATTERNGENERAL PURPOSE SCREWDRIVERS• Expert Quality • Polymer vulcanized ‘soft grip’ rubber

handle, colour coded for easy recognition• Chrome vanadium steel blades hardened, tempered with satin

chrome plated finish with sand blasted tips• The long length is ideal for use on vehicle radiator hose clips

Stock List Price List Price *TSP *TSPNo. Blade Tip ex. VAT Inc. VAT ex. VAT Inc. VAT

40802 P/Slot 6.0mm €11.16 €13.73 €6.55 €8.0640803 C/Slot No.2 €11.16 €13.73 €6.55 €8.06

980/66 PIECE ‘POUND THRU’SCREWDRIVER SET• Expert Quality • Contents: 2 plain slot, 2 cross slot

and 2 PZ TYPE • Hexagonal section chrome vanadiumsteel blades hardened, tempered and satin chromeplated finish with sand blasted tips • Handles are ‘softgrip’ polymer vulcanized with rooted cap allowinghandle to be struck without causing damage • Colourcoded handlesfor easyrecognition

Stock No.40005


*TSP € 20.35 *TSP € 25.03

990/1616 PIECE ENGINEERSSCREWDRIVER SET• Expert Quality • Contents: 7 plain slot; 4 cross slot; 5 PZ TYPE• The generous size colour coded handles are

manufactured from high quality transparent PVC• Chrome vanadium steel blades hardened, tempered

with satin chrome plated finish with sand blasted tips •Colour coded handles for easy recognition

Stock No.43571


*TSP € 38.50 *TSP € 47.35

939/77 PIECE MECHANICS PATTERNSCREWDRIVER SET• Contents: 3 plain slot, 2 cross slot and 2 PZ TYPE• Square matt black handles manufactured from high

impact resistant plastic• Satin chrome plated chrome vanadium steel blades

hardened tempered with sand blasted tips

Stock No.27031


*TSP € 16.25 *TSP € 19.99

Stock No.50809


*TSP € 17.20 *TSP € 21.16

PZ TYPE products are compatible with *Pozidriv®/Supadriv® fixing systems. Draper TX-STAR products are compatible with †Torx fixing systems.*Pozidriv®/Supadriv® are registered trademarks of Trifast Plc. †Torx is the registered trademark of Camcar/Textron Inc.

extra l-o-n-gscrewdrivers



1241/22 PIECE PLAIN SLOT/PZ TYPE ANGLESCREWDRIVER SET• Contents: 2 plain slot x PZ TYPE screwdrivers• Ideal for use in confined areas where clearance is limited• Incorporate two tips set at 90° to the shaft and heads• 125mm long blade

Stock No.13948

EX. VAT INC VAT

List Price € 5.28 List Price € 6.49*TSP € 3.50 *TSP € 4.31

2800/1012 PIECE IMPACTSCREWDRIVER SET• Expert Quality • Removes

stubborn fasteners through impact• Forward/reverse rotation and impact absorbing handgrip • Bit holder can be removed to use 1/2" sq drsocket with impact sockets • Contents: adaptor, 2 plainslot bits, 2 cross slot bits, 2 PZ TYPE bits and 4 DraperTX- STAR bits

Stock No.22322


*TSP € 16.06 *TSP € 19.75

ELKW10M10 PIECE METRIC EXTRA LONGPATTERN HEXAGON KEY SET• Expert Quality • Contents: 3-17mm• 6150 chrome vanadium steel hardened and tempered

Stock No.26939


*TSP € 25.80 *TSP € 31.73

HB9MM9 PIECE METRIC HEXAGON AND BALLEND HEXAGON KEY SET• Expert Quality • Contents: 1.5-10.0mm• Hexagon ball end on the long arm and conventional

hexagon end on the short arm• Chrome vanadium steel hardened and tempered with a

chemically blacked finish• Supplied in fold-out easy release holder which can be

wall-mounted

Stock No.08380

EX. VAT INC VAT


*TSP € 10.20 *TSP € 12.55

Stock No.88629


*TSP € 11.10 *TSP € 13.65

TK235QUICK CHANGE SOFT GRIPRETRACTABLE TRIMMING KNIFE• Expert Quality • Retractable pattern complete with five two notch

blades in holder• Diecast zinc alloy body with anti-slip soft grip

handle for user comfort. Rear storage magazineholds blades safely

Stock No.02888


*TSP € 10.50 *TSP € 12.92

03 02

KNIPEX 180mmCOMBINATION PLIERS• Expert Quality • Special tool steel, oil hardened and tempered• Smoothly ground heads with cutting edges separately

induction hardened• Heavy duty moulded handles and slip guards for extra

comfort and safety

Stock No.69574


*TSP € 19.45 *TSP € 23.92

70 02KNIPEX 160mmDIAGONAL SIDE CUTTERS• Expert Quality • Heavy duty moulded handles with slip guards• For hard, medium-hard and soft wires

Stock No.55499


*TSP € 23.69 *TSP € 29.14


Knipex products are manufactured toexacting international standards in one of Germany’s largest and most modern toolfactories using the latest technology andthe finest materials. Cutting edges areinduction hardened to guarantee efficient

cutting performance and great durability.Stringent quality control ensures that theseproducts are amongst the finest in theworld and particularly suited to industrialapplications.

TK200HD/D100DISPENSER OF 100 TWO NOTCHTRIMMING KNIFE/WINDOW SCRAPERBLADES• Reversible polished

steel blades withaccurately groundcutting edge

• Packed in plasticdispenser

• Suitable for use withDraper TrimmingKnives and WindowScrapers

Quick change



KNIPEX INTERNAL CIRCLIPPLIERS 90° TIPS• Expert Quality • Chrome vanadium electric steel, oil hardened and tempered

• Forged 90° tips with plastic coated handles

Stock List Price List Price *TSP *TSPNo. Length Capacity ex. VAT Inc. VAT ex. VAT Inc. VAT

36898 130mm 8-13mm €20.40 €25.09 €15.60 €19.1956166 130mm 12-25mm €22.27 €27.39 €17.10 €21.0356174 170mm 19-60mm €22.73 €27.96 €17.40 €21.4075778 215mm 40-100mm €24.79 €30.49 €19.15 €23.5581014 300mm 85-140mm €39.29 €48.32 €30.25 €37.21

KNIPEX EXTERNAL CIRCLIPPLIERS STRAIGHT• Expert Quality • Chrome vanadium electric steel, oil hardened and tempered

• Forged straight nonslip tips with plastic coated handles



KNIPEX EXTERNAL CIRCLIPPLIERS 90° TIPS• Expert Quality • Chrome vanadium electric steel, oil hardened and tempered

• Forged 90° tips with plastic coated handles



45 21KNIPEX 200mm CIRCLIP PLIERSFOR HORSESHOE CLIPS• Expert Quality

• Chrome vanadium steel, oil hardened andtempered

• For fitting and removing horseshoe clips andshaft retaining devices.

• Plastic coated handles

Stock No.54219


*TSP € 43.20 *TSP € 53.14

KNIPEX INTERNAL CIRCLIPPLIERS STRAIGHT• Expert Quality • Chrome vanadium electric steel, oil hardened and tempered• Forged straight nonslip tips with plastic coated handles



87 01EKNIPEX 250mm COBRAWATERPUMP PLIERS• Expert Quality • Eleven position adjustment and

parallelogram-shaped gripping surfaces for positivegrip on pipes and nuts • Has ‘no-nip’ feature whichprevents handles locking together and damagingusers’ hands • 25 jaw positions • Capacities: 50mmnuts (O/D); 46mm across flats

Stock No.13277


*TSP € 29.39 *TSP € 36.15

88 01

KNIPEX 250mm ALLIGATORWATERPUMP PLIERS• Expert Quality • Nine position adjustment and

parallelogram-shaped gripping surfaces for positivegrip on pipes and nuts • Plastic coated handles withslip guards for extra safety • ‘No-nip’ feature whichprevents handles locking together and damagingusers’ hands • Nine Jaw positions • Capacities:50mm nuts (O/D); 46mm across flats

Stock No.10954


*TSP € 22.36 *TSP € 27.50

Internal/External circlip pliers A selection of top quality Knipex circlip pliers, ideal for professional usewhere reliability and longevity are required...

Designed for the toughest environmentsthese two waterpump pliers haveawesome features...

Cobra• 11 position adjustment• 25 jaw positions

Alligator• 9 position adjustment• 9 jaw positions

Cobra and Alligator Pliers



GENERAL PURPOSE BALL PEIN HAMMERS• Forged high carbon steel head correctly hardened and tempered• Matt black painted head with striking face, bell, cheeks and pein

polished and lacquered• Natural straight grained hickory shaft sanded and lacquered

Stock List Price List Price *TSP *TSPNo. Weight ex. VAT Inc. VAT ex. VAT Inc. VAT

64590 450g (16oz) €16.63 €20.46 €9.30 €11.4464591 680g (24oz) €19.97 €24.56 €11.40 €14.0264592 900g (32oz) €21.00 €25.83 €12.30 €15.13

6211A

110g (4oz) BALL PEIN PIN HAMMER• High carbon steel head hardened and tempered with

matt black painted head and straight grained hickoryshaft

Stock No.64593


*TSP € 7.40 *TSP € 9.10

680g (24oz) SOFT FACED HAMMER• Expert Quality • Chrome plated head with screw-on faces of soft plastic and nylon


72027 Hammer €30.98 €38.11 €17.28 €21.2572028 Spare Nylon Face €5.76 €7.08 €5.20 €6.4072029 Spare Plastic Face €4.75 €5.84 €4.30 €5.29

RM/NMFG750g (26oz) FIBREGLASS SHAFTMALLET WITH NON-MARKINGRUBBER HEAD• Fibreglass shaft with shock-absorbing rubber hand grip• Non-marking head is ideal for use when using on

sensitive surfaces

Stock No.09119


*TSP € 7.38 *TSP € 9.08

RM956450g (16oz) HARDWOOD SHAFTRUBBER MALLET• Rubber head with face diameter of 58mm

Stock No.13928


*TSP € 4.32 *TSP € 5.31DBH1kg (2.2lb) DEAD BLOW HAMMER• Expert Quality • For heavy and effective blows• Hollow head has steel particles which prevent rebound

Stock No.37324


*TSP € 18.48 *TSP € 22.73

COPPER/RAWHIDE FACED HAMMERS• Expert Quality • Heavy malleable iron head fitted with a copper and a rawhide face• Shaped wood shaft


20070 680g (24oz) €39.46 €48.53 €21.60 €26.5720088 1100g (38oz) €48.89 €60.13 €26.60 €32.7220850 680g Rawhide Face €9.02 €11.10 €8.15 €10.0221826 680g Copper Face €9.74 €11.99 €8.75 €10.7621825 1100g Rawhide Face €11.45 €14.08 €10.30 €12.67

A useful selection of

hammers and malletsThese hammers and mallets are ideal for a variety of tasks around theworkshop - as with all Draper products they are finished to very highstandards and designed to cope with many years of hard work.



HDS/RDSCRAPER WITHWOOD SHAFT• For numerous jobs including

carpet tile removal and generalscraping tasks.

• Hardened sharpened blade size230 x 180mm that canre-sharpened to maintain

cutting edge• Length: 1410mm

Stock No.05166


*TSP € 21.02 *TSP € 25.85

BSFGSQUAREMOUTHBUILDERSSHOVEL WITHFIBREGLASSSHAFT• Y-dee handle• Overall length:

940mm

• Pressed blade size:240 x 320mm

Stock No.57567


*TSP € 15.50 *TSP € 19.07

CYB/B25/5330mm YARDBROOM• Polypropylene/Sherbro

mix head• Supplied with wood

shaft 1370mm long x28mm dia

Stock No.88618


*TSP € 17.50 *TSP € 21.53

RUBBER FLOOR SQUEEGEES• Handle sold separately

- 28mm Draper Stock No.43787

Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT

43784 450mm €5.54 €6.82 €3.85 €4.7443794 600mm €7.27 €8.94 €4.75 €5.84

BRM/HAN

WOODEN BROOM HANDLE• Handles suitable for small or large broom heads,

squeegees etc• Length: 1525mm x 28mm dia

Stock No.43787


*TSP € 3.80 *TSP € 4.67

ESGMT5M/16ft HEAVY DUTY SOFT GRIPMEASURING TAPE• Expert Plus Quality • Impact-resistant satin chrome

plated ABS case with belt clip • Soft grip with blade

locking button • Metric and imperial graduations

Stock No.32035


*TSP € 11.99 *TSP € 14.75

Tough TapeThis extra high qualitytape has clearly markedmetric and imperialgraduations.The wideblade - 25mm - which isunusual makes this tapeideal for users who wanta clear tape blade that iseasy to see.Ruggedlybuilt, these tapes will lastmany years in buildingand industrialenvironments.



PB/DSET55 PIECE PAINT BRUSH SET• Contents: brush widths 12, 25, 38, 50 and 75mm• Pure bristle with hardwood handles• Stainless steel ferrule

Stock No.71293


*TSP € 9.99 *TSP € 12.29

CSI-16W CORDLESS SOLDERING IRON• Slimline soldering iron with soft grip and LED to

indicate iron is on• Soldering head is offset from body to give good

visibility whist working• Double action safety switch helps prevent accidental

switch on

• Supplied with soldering tip• Average working life per set of alkaline batteries is90mins (approx.)

• Uses 4 x AA batteries (sold separately)

Stock No.13778


*TSP € 20.00 *TSP € 24.60

GT8

BUTANE SOLDERING IRON• Instant electronic ignition, variable flame control and

a refillable tank • Compact single hand operation •One fill of standard butane lighter fuelwill give up to 20 minutes(approx.) continuouswork (at midsetting)

• Length:147mm

Stock No.78774


*TSP € 15.98 *TSP € 19.66

SG100100W 230V SOLDERING GUN KIT• Kit comprising soldering gun with 1.2M (approx.)

cable and approved plug, two spare tips, tube ofsolder and flux

Stock No.71420

EX. VAT INC VAT


*TSP € 17.95 *TSP € 22.08

Stock No.68157


*TSP € 6.20 *TSP € 7.63

Soldering products


62075 12W €35.04 €43.10 €20.35 €25.0362074 18W €35.04 €43.10 €20.35 €25.0362073 25W €35.04 €43.10 €20.35 €25.03

230V PROFESSIONAL SOLDERING IRONS• Expert Quality • Designed for continuous use in industrial environments• To BS EN 60335-2-45 Specification• Complete with tip, 1.5M (approx.) cable and approved plug

619MC

PACK OF 8 MIXED COLOURS 10Mx 19mm INSULATION TAPE• Expert Quality • Manufactured to BS3924 and

BS4J10 Specifications • PVC self-extinguishingflame resistant tape manufactured under strictquality control

For all manner of soldering applications around the workshop andor garage - you will find the soldering iron you need here.

The butane and cordless versions are ideal for lighter duty use when access toa power supply is limited.The Expert Quality irons are to BS EN 60335-2-45.

Insulation tape



SL55 TREAD ALUMINIUM STEP LADDER• Expert Quality • High strength aluminium construction with integral

safety rail and slip-resistant feet for extra stability

Specification:Maximum load EN131 ... 150kgPlatform size ... 260 x 270mmTread width ... 460mmGround to platform height ... 1050mm (approx.)Spread ... 990mm (approx.)Weight ... 4.7kg

Stock No.04624


*TSP € 68.40 *TSP € 84.13

SL7

7 TREAD ALUMINIUM STEP LADDER• Expert Quality • High strength aluminium construction with integral

safety rail and slip-resistant feet for extra stability

Specification:Maximum load EN131 ... 150kgPlatform size ... 260 x 270mmTread width ... 520mmGround to platform height ... 1485mm (approx.)Spread ... 1290mm (approx.)Weight ... 7.4kg

Stock No.04625


*TSP € 83.98 *TSP € 103.30

CLP

COMBINATION ALUMINIUM LADDERAND PLATFORM• Expert Quality • Versatile high quality aluminium ladder that can be used

in three positions: straight; ‘A’ frame and work platformwith safety barrier

• Non-slip one-piece plywood platform supplied fitsbetween two ladder sections when in work platformmode

• Slip-resistant feet on the ladder stabilisers keep ladderin position desired whilst working

• Maximum load: 150kg

Specifications:General:Maximum load EN131 ... 150kgPositions:‘A’ Frame:Height ... 1600mmSpread ... 1030mmWork Platform:Platform height ... 1000mm (max.)Overall width ... 1580mmExtension Ladder:Length ... 2730mm

Stock No.04660


*TSP € 154.75 *TSP € 190.34

MFL3MULTI-PURPOSEALUMINIUM LADDER• Expert Quality • Versatile aluminium ladder/platform with high quality

steel lever locking hinges that can be used in threepositions: straight (also as standoff); ‘A’ frame andwork platform

• Complete with two-piece stippled steel platform whichfits onto treads when in work platform configuration

• Auto locking hinges keep ladder stable• Slip-resistant feet on the ladder stabilises position

whilst working

Specifications:General:Maximum load EN131 ... 150kgPositions:‘A’ Frame:Height ... 1650mmSpread ... 1050mmWork Platform:Platform size ... 1380 x 300mmPlatform height ... 890mmSpread ... 2300mmStraight Ladder:Length ... 3360mmWith standoff ... 2490mmStandoff length ... 890mm

Stock No.04685


*TSP € 113.81 *TSP € 139.99

CAN BE USEDIN THREE

POSITIONS:STRAIGHT

(WITHSTANDOFF),‘A’ FRAMEAND WORKPLATFORM

CAN BE USED INTHREE POSITIONS:

STRAIGHT, ‘A’ FRAMEAND WORK PLATFORM

PRICEINCLUDESTHE METALPLATFORM

We are certainly not the first company to offer ladders but we believe the qualityand value of our range is second to none. Just part of the range is shown here.

These ladders have features and benefits that set them apart from existingmodels on the market, which can be more expensive for less features.

Most importantly when it comes to health and safety, peace of mind comes fromthe fact that all our ladders are manufactured in accordance with EN131/EN14183standards and are fully guaranteed.

Please refer to the HSE publications ‘Work at Height 2005’ regulations and ‘Work

at Height (amendment) 2007’ regulations (UK only) when using ladders/platformsin the workplace,before using any of these ladders.

Check out these great quality ladders

EN131STANDARD

150kg LOAD

EN131STANDARD

150kg LOAD



TC11/HD-PRO

11 DRAWER TOOL CHEST• Expert Plus Quality • Heavy duty lifting handles with grips• 5 full width drawers: 568 x 405 x 35mm• 1 full width drawer: 568 x 405 x 60mm• 4 half width drawers: 299 x 405 x 35mm• 1 half width drawers: 299 x 405 x 115mm• Overall size: 1029 x 452 x 503mm

Stock No.78213


*TSP € 775.00 *TSP € 953.25

RC14/HD-PRO14 DRAWER ROLLER TOOL CABINET• Expert Plus Quality • 6 two third width drawers: 568 x 405 x 60mm• 1 two third width drawer: 568 x 405 x 90mm• 1 two third width drawer: 568 x 405 x 145mm• 4 third width drawers: 299 x 405 x 60mm• 1 third width drawer: 299 x 405 x 90mm• 1 third width drawer: 299 x 405 x 310mm• Overall size: 1041 x 457 x 1048mm

Stock No.78214


*TSP € 984.88 *TSP € 1211.40

TC6/HD-PRO

6 DRAWER TOOL CHEST• Expert Plus Quality • Heavy duty lifting handles with grips• 1 full width drawer: 565 x 418 x 60mm• 5 full width drawers: 565 x 418 x 51mm• Overall size: 663 x 451 x 502mm

Stock No.89291


*TSP € 555.00 *TSP € 682.65

RC8/HD-PRO8 DRAWER ROLLER TOOL CABINET• Expert Plus Quality • 2 full width drawers: 568 x 418 x 51mm• 2 full width drawers: 568 x 418 x 78mm• 3 full width drawers: 568 x 418 x 102mm• 1 full width drawer: 568 x 418 x 161mm• Overall size: 674 x 459 x 904mm

Stock No.89292


*TSP € 616.75 *TSP € 758.60

Draper Plus Quality

Tool Chests and Cabinets A tool chest and roller cabinet designed and manufactured to the very highestpossible standards.Draper Expert Plus - for when only the very best will do.

Positive latching catches

that keep drawers firmly

closed yet easily opened

with the catch release

handles.

Every drawer has

silky smooth ball

bearing runners

Robust maintenance

free folding struts are

used for simplicityand long life.

Roller cabinet has a

comfortable tubular

pull handle.

The tool chest features

strong lifting handles

with generous plastic

grips.

MDF board is used to

protect the roller

cabinet work surface.

Heavy gauge sheet steel

is used throughout with

a tough oven baked

powder coated finish.

Two swivelling

castors with locking

facility.

Large diameter and

extra wide wheels.

Complete with high

security cylinder

barrel locks and two

keys.

PALLETIZED

DELIVERIES

The products marked withthis logo can only bedelivered on a pallet.Prior

to purchase please ensure you haveadequate facilities to unload palletizeddeliveries. Contact your Draper stockistfor local information.

These tool chests androller cabinets havefantastic features...



TC8C/40

8 DRAWER TOOL CHEST• Expert Quality • 5 two thirds width drawers: 580 x 370 x 60mm• 3 deep third width drawers: 270 x 370 x 115mm• Overall size: 1010 x 400 x 550mm

Stock No.07612


*TSP € 472.75 *TSP € 581.48RC14C/40

14 DRAWER ROLLER TOOL CABINET• Expert Quality • 6 two third width drawers: 570 x 400 x 60mm• 1 two third width drawer: 570 x 400 x 90mm• 1 two third width drawer: 570 x 400 x 145mm• 4 third width drawers: 290 x 400 x 60mm• 1 third width drawer: 290 x 400 x 90mm• 1 third width drawer: 290 x 400 x 305mm• Overall size: 1030 x 460 x 1030mm

Stock No.07613


*TSP € 761.40 *TSP € 936.52

TC10C/5210 DRAWER TOOL CHEST• Expert Quality • 6 half width drawer: 580 x 360 x 35mm• 2 half width drawers: 580 x 360 x 60mm• 2 half width drawers: 580 x 360 x 90mm• Overall size: 1320 x 400 x 500mm

Stock No.07614


*TSP € 633.00 *TSP € 778.59RC14C/5214 DRAWER ROLLER TOOL CABINET• Expert Quality • 6 half width drawers: 575 x 400 x 60mm• 2 half width drawers: 575 x 400 x 35mm• 4 half width drawers: 575 x 400 x 90mm• 2 half width deep drawers: 575 x 400 x 230mm• Overall size: 1330 x 460 x 1030mm

Stock No.07615


*TSP € 945.50 *TSP € 1162.97SC4C4 DRAWER SIDE CABINET FORROLLER CABINETS• Expert Quality • 1 full width draw:

290 x 365 x 60mm• 1 full width draw:



290 x 365 x 125mm• Overall size:

400 x 450 x 1010mm

Stock No.07616


*TSP € 270.75 *TSP € 333.02

All drawers are fitted with

robust positive seating to

stop them coming open

when moving the box

unlocked.

every Draper Expert

tool box has ball

bearing runners on

each drawer

...whilst roller cabinets

have comfortable pull

handles.

All come with

cylinder barrel locks

and two keys.

Fitted with heavy duty, swivelling

and braked castors.

All models

come with gas struts

for convenience.....

Tool chests are fitted

with tough chrome

plated soft-grip

lifting handles.

Draper Expert

Quality tool boxes

are made from thick

sheet steel.

Work surfaces and

drawers are lined

with EVA foam mats.

These tool chests androller cabinets havegreat features...

Draper Expert Quality

Tool Chests and Cabinets A range of professional quality, high specification tool chests and cabinetsdesigned for the commercial workshop/garageSee this page and pages 76 and 77 for the full range...

Mobile Tool TrolleysIdeal for moving tools around the workshop - see pages 78 and 79.

1010mm

1 0 5 0 m m

1330mm

1 3 3 0 m m



T4C

4 DRAWER TOOL CHEST• Expert Quality • 1 full width drawer: 569 x 260 x

67mm • 3 full width drawers: 569 x 260 x 40mm •Overall size: 660 x 305 x 394mm

Stock No.03081


*TSP € 195.60 *TSP € 240.59

TC6C6 DRAWER TOOL CHEST• Expert Quality • 1 full width drawer: 569 x 260 x

67mm • 2 full width drawers: 569 x 260 x 40mm• 3 third width drawers: 163 x 260 x 40mm• Overall size: 660 x 305 x 394mm

Stock No.03083


*TSP € 215.95 *TSP € 265.62

TC8C8 DRAWER TOOL CHEST• Expert Quality • 1 full width drawer: 569 x 360 x

67mm • 4 full width drawers: 569 x 360 x 40mm• 3 third width drawers:

163 x 360 x40mm • Overallsize: 660 x 406x 492mm

Stock No.03084


*TSP € 414.00 *TSP € 509.22

TC9C

9 DRAWER TOOL CHEST• Expert Quality • 3 full width drawers: 569 x 260 x

40mm • 6 third width drawers: 163 x 260 x 40mm• Overall size:

660 x305 x421mm

Stock No.03085


*TSP € 326.40 *TSP € 401.47

TC10C

10 DRAWER TOOL CHEST• Expert Quality • 1 full width

drawer: 569 x360 x 67mm

• 2 full widthdrawers: 569 x360 x 40mm

• 1 third drawer:163 x 360 x148mm

• 6 third width

drawers: 163 x360 x 40mm• Overall size:

660 x 406 x492mm

Stock No.03086


*TSP € 460.20 *TSP € 566.05

IC3C3 DRAWER INTERMEDIATE TOOLCHEST• Expert Quality • 2 full width drawers: 569 x 403 x 40mm• 1 full width drawer: 569 x 403 x 94mm• Overall size: 672 x 448 x 316mm

Stock No.03087


*TSP € 238.80 *TSP € 293.72

RC5C

5 DRAWER ROLLER TOOL CABINET• Expert Quality • 2 fixed and 2 swivelling castors with

brakes • 3 full width drawers: 569 x 404 x 67mm• 2 full width drawer: 569 x 404 x 121mm• Overall size: 672 x 457 x 794mm

(heightincludescastors)

Stock No.03088


*TSP € 432.00 *TSP € 531.36

tool storage A range of

professionalquality, highspecification

tool chestsand cabinetsdesigned forcommercialworkshops/

garages



RC8C

8 DRAWER ROLLER TOOL CABINET• Expert Quality • 2 fixed and 2 swivelling castors with

brakes • 3 full width drawers: 569 x 404 x 40mm • 2full width drawers: 569 x 404 x 67mm • 1 full widthdrawer: 569 x 404 x 94mm • 1 full width drawer: 569 x404 x 121mm • 1 full width drawer: 569 x 404 x148mm • Overall size: 672 x 457 x 1006mm (heightincludes castors)

Stock No.03089


*TSP € 516.00 *TSP € 634.68

RC10C10 DRAWER ROLLER TOOL CABINET• Expert Quality • 2 fixed and 2 swivelling castors with

brakes • 4 half width drawers: 257 x 404 x 40mm • 1full width drawer: 569 x 404 x 40mm • 2 full widthdrawers: 569 x 404 x 67mm • 1 full width drawer: 569x 404 x 94mm • 1 full width drawer: 575 x 404 x121mm • 1 full width drawer: 569 x 404 x 148mm

• Overall size: 672 x 457 x 1005mm (height includescastors)

Stock No.03091


*TSP € 527.95 *TSP € 649.38

DRAPERBLACK BOX®

(CONTRACTORS STORAGE BOXES)• Heavy duty contractors storage boxes manufactured

from sheet steel with powder coated finish• Ideal for use on site, in vans, workshops or garages• Feet with bolt holes for fixing to a solid base to avoid

complete removal• Gas strut and integrated single pin hinge• Heavy duty lifting handles and the raised feet allow for

easier movement by fork lift trucks• Two cut outs on front for padlock attachment

Stock Internal List Price List Price *TSP *TSPNo. Dimensions ex. VAT Inc. VAT ex. VAT Inc. VAT

05544 1210 x 610 x 470mm €401.71 €494.11 €381.30 €469.0005543 900 x 425 x 330mm €278.11 €342.08 €263.95 €324.66

RCTC8

COMBINED

ROLLERCABINETCHEST• Sheet steel

construction• Locking system

(top chest)• Overall size:

616 x 330x1080mm

Stock No.78229


*TSP € 174.80 *TSP € 215.00

TB530EXTRA LONG 4 TRAY CANTILEVERTOOL BOX• Expert Quality • Extra long tool box manufactured from heavy gauge

sheet steel, tubular handles and powder coated finish• Trays open automatically when handle is depressed and

close when lifted. The lid form incorporates provisionfor a padlock• Overall size: 530 x 200 x 210mm

Stock No.88904


*TSP € 50.00 *TSP € 61.50

TB584BTOOL BOX• Expert Quality • Tough durable plastic• Tote tray 535 x 200 x 45mm• Two clip type locks on lid and sturdy carrying handle• Overall size: 584 x 267 x 254mm

Stock No.87987


*TSP € 27.24 *TSP € 33.50

TB660TOOL/ORGANISER BOX WITHTOTE TRAY• Expert Quality • Impact resistant polypropylene tool

box • Tote tray • Two removable organisers• Two aluminium lock down latches • Aluminium soft grip

handle • Overall size: 660 x 303 x 283mm

Stock No.05178


*TSP € 53.62 *TSP € 65.95

Stock No.05180


*TSP € 35.37 *TSP € 43.50

TBCL570CANTILEVER TOOL BOX/ORGANISER• Expert Quality • Impact resistant polypropylene tool

box • Tote tray • 15 removable organiserscompartments • Aluminium soft grip handle

• Overall size: 570 x 305 x 165mm

storage...



TTE2

2 TIER TOOL TROLLEY• Expert Quality • Heavy duty steel with powder coated

protectivefinish

• Chromeplatedhandles

• Twoswivellingcastors andtwo fixed

• Size: 762 x406 x942mm

Stock No.07631


*TSP € 89.40 *TSP € 109.96

TTE3

3 TIER TOOL TROLLEY• Expert Quality • Heavy duty steel with powder coated

protective finish • Chrome plated handles • Twoswivelling castors and two fixed • Size: 762 x 406 x942mm

Stock No.07632


*TSP € 105.50 *TSP € 129.77

TT1D22 TIER TOOL TROLLEY WITH ONEDRAWER•

Expert Quality • Ful l width

lockable draweron ball bearingrunners • Heavyduty steel withpowder coatedprotective finish• Chrome platedhandles • Twoswivellingcastors and twofixed • Size: 762x 406 x 942mm

Stock No.07633


*TSP € 111.50 *TSP € 137.15

TT2D2 DRAWERTOOL TROLLEY• Expert Quality • Large top storage

compartment andtwo drawers, allfitted with EVA foam liners and ball bearing runners forsmooth operation and long life

• Fitted with two fixed and two braked swivelling castorswith wide tyres

• Integral locking system to secure top compartment anddrawers (supplied with two keys)

• top compartment: 740 x 520 x 180mm• 2 drawers: 600 x 470 x 65mm• shelf: 70 x 480 x 70mm • shelf: 75 x 480 x 65mm• Overall size (inc. shelves): 910 x 530 x 1000mm

Stock No.05714


*TSP € 317.95 *TSP € 391.08

TT2D22 TIER TOOL TROLLEY WITH TWODRAWERS• Expert Quality

• Two full widthlockable drawer onball bearingrunners • Hingedreinforced lockablelid with gas struts

• Heavy duty steelwith powder coatedprotective finish

• Chrome platedhandles

• Two swivellingcastors and twofixed • Dimensions:762 x 406 x1029mm

Stock No.07634


*TSP € 185.40 *TSP € 228.04

TT2DB

2 TIER TOOL TROLLEY WITHTWO DRAWERS• Expert Quality • Two full width lockable

drawers onball bearingrunners

• Manufacturedfrom 0.6mmsteel withpowder coatedprotectivefinish

• Two swivellingcastors andtwo fixed

• Size : 712 x440 x 694mm

Stock No.07635


*TSP € 154.80 *TSP € 190.40

TT2DC2 TIER TOOLTROLLEY WITHTWO DRAWERS• Expert Quality • Two full width

lockable drawer onball bearing runners

• Hinged lockable lidwith gas struts

• Heavy duty steel withpowder coatedprotective finish

• Two swivellingcastors and two fixed

• Size: 763 x 488 x1050mm

Stock No.07636


*TSP € 298.80 *TSP € 367.52

WST-13 TIER PROFESSIONAL WORKSHOPTROLLEY• Expert Quality • High strength

shelves withaluminium uprightslockable steeldrawer on rollerbearings, two fixedand two lockableswivelling castorwheels

• Soft grip handles• Drawer dimensions:

500 x 400 x 60mm(L x W x H) •Supplied flat-packedwith instructionbooklet • Overalldimensions:670 x 470 x 970mm

Stock No.04611


*TSP € 191.95 *TSP € 236.10

Draper Expert Quality

Tool TrolleysQuality tool trolleys packed withfeatures to facilitate easy movement of tools or parts around the workshopand or garage.



WST-2

3 TIER WORKSHOP TROLLEY• Plastic construction with aluminium uprights

comprising three shelves each with two removabledividers, six screwdriver holding slots, four additionalcompartments, two cup holders and a cable tidy

• Two fixed and twoswivelling castorwheels

• Supplied flat packedwith instructionbooklet

• Configuration- each tier: 2compartments: 120x 260 x 40mm andone compartment:220 x 260 x 40mm

• Overall dimensions:570 x 450 x 890mm

Stock No.04612


*TSP € 58.20 *TSP € 71.59

TTB22 TIER TOOL TROLLEY• Heavy duty steel with powder coated protective finish• Two swivelling castors and two fixed• Size: 845 x 410 x 780mm

Stock No.07629


*TSP € 56.35 *TSP € 69.31

TTB33 TIER TOOL TROLLEY• Heavy duty steel with powder coated protective finish

• Two swivelling castors and two fixed• Size: 845 x 410 x 780mm

Stock No.07630


*TSP € 69.00 *TSP € 84.87

QC22D

22 COMPARTMENT ORGANISER• Configuration: 8 compartments: 45 x 45 x 48mm; 10

compartments: 45 x 95 x 48mm; 4 compartments: 95 x95 x 48mm • Plastic organiser with an adjustable matrixof lift-out storage compartments • Case has a carryinghandle with ‘snap fit’ closures and clear lid • Overallsize: 415 x 330 x 60mm

Stock No.25924


*TSP € 11.35 *TSP € 13.96

POC30

30 drawer ORGANISER• Configuration: 24 drawers size: 53 x 134 x 38mm; 6

drawers size: 110 x 134 x 53mm• Impact-resistant plastic• Latching facility to prevent drawer fall out• Slotted holes in cabinet to facilitate wall mounting• Overall size: 500 x 160 x 255mm

Stock No.12015


*TSP € 18.35 *TSP € 22.58

SBB47S

47 BIN (SMALL/LARGE) FLOORSTANDING MOBILE STORAGE UNIT SET• Expert Quality • Rigid metal frame• 15 x plastic bins

size: 125 x 210 x125mm

• 32 x plastic binssize: 85 x 145 x70mm

• Storage Unitdimensions: 940 x

260 x 1160mm

Stock No.07618


*TSP € 131.99 *TSP € 162.35

SBB94T94 BIN (SMALL/LARGE) FLOORSTANDING MOBILE STORAGE UNIT SET• Expert Quality • Rigid metal frame• 30 x plastic bins

size: 125 x 210 x125mm

• 64 x plastic binssize: 85 x 145 x70mm

• Storage Unitdimensions: 940 x500 x 1250mm

• Fitted with twobraked and twounbraked

swivelling castorwheels

Stock No.07617


*TSP € 232.35 *TSP € 285.79

SBB24

24 BIN WALL STORAGE UNIT SET(SMALL/MEDIUM/LARGE BINS)• Comprises 24 plastic storage bins - sizes: 4 large 102 x

215 x 75mm; 8 medium 102 x 160 x 75mm and 12small 102 x 100 x 75mm that fix to a heavy duty plasticmounting board size 483 x 540mm

Stock No.06796


*TSP € 25.98 *TSP € 31.96

plastic bin

storageunit setsThese storage units (right and onpage 80) are ideal for movingcomponents around the workshopor assembly lines etc.



SBB24B24 BIN WALL STORAGEUNIT SET (LARGE BINS)• Comprises 24 plastic storage bins

- sized: 102 x 160 x 75mm that fixto a heavy duty plastic mountingboard size 483 x 540mm

Stock No.06797


*TSP € 25.98 *TSP € 31.96

SBB24C24 BIN WALL STORAGE UNITSET (SMALL/MEDIUM BINS)• Comprises 24 plastic storage bins - sizes:

12 medium 102 x 160 x 75mm and 12 small102 x 100 x 75mm that fix to a heavy dutyplastic mounting board size 483 x 540mm

Stock No.06798


*TSP€

24.90 *TSP€

30.63

WSPB

WORKSTATION 2 PIECE PEGBOARD

SET• SteelfabricatedPeg boards

• Metalhammeredprotectivefinish

• Suppliedwith fixingsand pegs

• Size: 815 x1120mm



*TSP € 69.00 *TSP € 84.87

WS2DC

WORKSTATION2 DOOR FLOOR

CABINET• Two door cabinet• Steel fabrication

with metalhammeredprotective finish

• Doors with heavyduty hinges andlock with two keys• Three internalshelves • Heavyduty lockinglevellers • Size:675 x 405 x1800mm



*TSP € 248.35 *TSP € 305.47

WS5DTC

WORKSTATION 5 DRAWERROLLER

TOOLCABINET• Five door tool

chest• Steel

fabricationwith metalhammeredprotectivefinish • Four60mm castors

• Lock with twokeys

• Heavy duty ballbearing sliders

• Size: 675 x 450x 832mm



*TSP € 280.40 *TSP € 344.89

Draper WORKSTATION - A complete modular storage system

Simply choose the items you need tomake your ideal workstation....

Illustration shows completeworkstation system

WSBC

WORKSTATIONCABINET• Steel fabrication with

metal hammeredprotective finish

• Metal doors with heavyduty hinges and lock andtwo keys

• For use in conjunctionwith Draper Workstation

Workbench StockNo.07637

• Size: 405 x 415 x 825mm

WS2DWC

WORKSTATION 2 DOOR WALLCABINET• Two door cabinet• Steel fabrication

with metalhammeredprotective finish

• Metal doors withheavy duty hingesand lock with two

keys• One internal shelf• Size: 675 x 305 x

610mm

Stock No.07638


*TSP € 111.99 *TSP € 137.75

Stock No.07640


*TSP € 119.99 *TSP € 147.59

WSWB

WORKSTATION WORKBENCH• Steel fabrication• Metal hammered protective finish• Wooden work top• Sixe: 1625 x 510 x 955mm

Stock No.07637


*TSP € 200.35 *TSP € 246.43



LK2

2 DOOR LOCKER• Steel construction• Each individual locker

has a clothes rail• Lever lock and two keys

(per door)• Units can be secured

together, if required• 2 x lockers size: 380 x

450 x 870mm• Overall dimensions: 380

x 450 x 1800mm

Stock No.07644


*TSP € 81.60 *TSP € 100.37

LK44 DOORLOCKER• Steel

construction• Each supplied

with lever lockand two keys(per door)

• Can be securedtogether, ifrequired

• 4 x lockers eachsized: 380 x 450x 330mm

• Overalldimensions: 380x 450 x 1800mm

Stock No.07645


*TSP € 88.20 *TSP € 108.49

MSUHD104/PROHEAVY DUTY STEEL 4 SHELVING UNIT• Expert Quality , four shelf unit of robust construction

manufactured from high quality steel• Wire construction shelves avoid collection of dust• Modular in design, different configurations can be

achieved by changing layout• Each shelf can carry up to 364kg (evenly distributed)

giving a total of 1456kg• Easily assembled, instructions supplied• Size: 1040 x 430 x 1830mm

Stock No.05230


*TSP € 179.95 *TSP € 221.34

MSUHD104E/PRO

HEAVY DUTY STEEL 4 SHELVINGEXTENSION UNIT• Expert Quality , four shelf extension unit of

robust construction manufactured from high qualitysteel • Modular in design, it conjoins DraperShelving Unit Stock No. 05230 using a commonupright • Wire construction shelves avoid collectionof dust • Modular in design, different configurationscan be achieved by changing layout • Each shelfcan carry up to 364kg (evenly distributed) giving atotal of 1456kg • Easily assembled, instructionssupplied • Size: 1040 x 430 x 1830mm

Stock No.05231


*TSP € 163.20 *TSP € 200.74

MSUHD195/PRO

HEAVY DUTY STEEL 4 SHELVING UNIT• Expert Quality , four shelf unit of robust construction

manufactured from high quality steel• Wire construction shelves avoid collection of dust• Modular in design, different configurations can be

achieved by changing layout• Each shelf can carry up to 364kg (evenly distributed)

giving a total of 1456kg• Easily assembled, instructions supplied• Size: 1959 x 610 x 1830mm

Stock No.05227


*TSP € 292.20 *TSP € 359.41

MSUHD195E/PRO

HEAVY DUTY STEEL 4 SHELVINGEXTENSION UNIT• Expert Quality , four shelf extension unit of robust

construction manufactured from high quality steel• Modular in design, it conjoins Draper Shelving Unit

Stock No. 05227 using a common upright• Wire construction shelves avoid collection of dust• Modular in design, different configurations can be

achieved by changing layout • Each shelf can carryup to 364kg (evenly distributed) giving a total of1456kg • Easily assembled, instructions supplied

• Size: 1959 x 610 x 1830mm

Stock No.05229


*TSP € 267.00 *TSP € 328.41

LK1

SINGLE DOORLOCKER• Steel construction• Internal shelf and

clothes rail• Lever lock and two

keys

• Units can be securedtogether, if required• Dimensions: 380 x

450 x 1800mm

Stock No.07643


*TSP € 78.50 *TSP € 96.56

new lockers

364kg

EACH SHELF CANHOLD UP TO 364kg

364kg


364kg


364kg

EACH SHELF CAN

HOLD UP TO 364kg

ATTACHESTO STOCK

No. 05230

ATTACHESTO STOCKNo. 05227



Stock List Price List Price *TSP *TSPNo. ex. VAT Inc. VAT ex.VAT Inc.VAT

21659 €76.20 €93.73 €65.95 €81.1221663 €101.88 €125.31 €92.68 €114.00

MSU152

STEEL SHELVING UNIT• Four shelf unit of robust construction manufactured

from quality steel• Each shelf can carry up to 50kg (evenly distributed)

giving a total of 200kg• Boltless for easy assembly, instructions supplied• Overall size: 760 x 200 x 1520mm (L x W x H)

Stock No.21658


*TSP € 36.25 *TSP € 44.59

DST33 in 1 HEAVY DUTYSACK TRUCK• Tubular steel frame• Pneumatic tyres• Converts to three positions• Maximum capacity: 2 wheels

+ 2 castors 300kg; 2 wheels250kg

Stock No.56444


*TSP € 92.70 *TSP € 114.02

Stock No.49167


*TSP € 369.50 *TSP € 454.49

*TKC

TOOL CHEST KIT• Handy tool kit with tool chest, for use in the engineering

workshop or garage• Drawers are fitted with anti slip mats and ball bearing

runners for smooth operation and long life• Secure integral locking systems supplied with two keys• Tool chest overall size: 600 x 260 x 340mm

Stock No.87950


*TSP € 239.84 *TSP € 295.00

*PTK

PROFESSIONAL TOOL KIT• Comprises combined roller cabinet chest (size 616 x

330 x 1080mm) with three power tools and a selectionof hand tools suitable for use in the garage workshop

Stock No.43746


*TSP € 741.60 *TSP € 912.17


PT20002 tonne PALLET TRUCK• Ideal for use in warehouse

environments• Fork length: 1150mm• Lifting height: 85mm (min.)• Lifting height: 190mm (max.)• Fork width: 160mm• Overall fork width: 550m

HEAVY DUTY STEEL SHELVINGUNITS• Expert Quality • Five shelf unit of robust construction manufactured

from high quality steel• Boltless for easy assembly• Ideal for industrial use• Each shelf can carry up to 300kg (evenly distributed)

giving a total of 1500kg• Stock No. 21659 dimensions: 920x305x1830mm• Stock No. 21663 dimensions: 1220x450x1830mm

conventional

using extra setof wheels

as 'drag-along' truck

300kg


50kg




*GTKGENERAL TOOL KIT• Comprises combined roller cabinet chest, power tools

and a selection of popular hand tools

Stock No.43748


*TSP € 497.56 *TSP € 612.00

*DTK

DE-LUXETOOL KIT• Compr ises a

Draper Expert fourdrawer rollercabinet, fourdrawer tool chest,three drawerintermediate chestand a selection ofmostly Draper Expert hand toolsfor use in garageworkshops

Stock No.43750


*TSP € 1114.80 *TSP€ 1371.20

DUAL READING DIGITAL EXTERNALMICROMETERS• Expert Quality • Enamel frame, heat plates, satin chrome thimble and

sleeve • Carbide tipped measuring anvils, lock andratchet stop • Graduations 0.001mm and 0.0005"

• Ball end cap for measuring curved surfaces

• Supplied with SR44 battery

Stock List Price List Price *TSP *TSPNo. Range ex. VAT Inc. VAT ex. VAT Inc. VAT

46599 0-25mm/0-1" €134.28 €165.16 €68.40 €84.1346600 25-50mm/1-2" €144.38 €177.59 €85.80 €105.53

PDDG

DUAL READING DIGITAL DIALTEST INDICATOR• Expert Quality • Dial diameter 55mm

with mounting lug• 0-25mm/0-1" travel• Graduations:

0.01mm/0.005"• Uses CR2032 battery

(supplied)

PDG

DIAL TEST INDICATOR• Expert Quality • Reads 0-50 in graduations of 0.01mm or 0.005"• Range: 0-10mm

Stock No.51830


*TSP € 18.01 *TSP € 22.15

Stock No.46608


*TSP € 50.25 *TSP € 61.81

PDVC150MDUAL READING DIGITAL VERNIERCALIPER• Expert Quality • Metal-bodied manufactured from

brushed stainless steel • Extra large display reading0.01mm and 0.005" • Range 0-150mm/6". • Suppliedwith SR44 battery

Stock No.46610


*TSP € 24.95 *TSP € 30.69

BG50/160

50-160mm BORE GAUGE SET• Expert Quality • Contents: 3mm travel dial test indicator; 55mm

extension bar; 4 spacer rings size: 0.5, 1.0, 2.0 and3.0mm; 12 measuring rods size: 50, 55, 60, 65, 70,75, 80, 85, 90, 95, 100 and 105mm

• Accurately measures bores, detects tapers or ovality• 0.01mm accuracy

Stock No.02753


*TSP € 71.20 *TSP € 87.58

Draper ExpertQuality

precisionengineering range

A comprehensive selection for theworkshop or engineering environment -see pages 84,85 and 86 for more...



MB-LDFABMAGNETICSTAND WITHFINEADJUSTMENT• For use with dial

indicators• Powerful magnetic

base with on/offswitch

• Fine adjustmentscrew

Stock No.45277


*TSP € 24.75 *TSP € 30.44

PDGS

METRIC DIAL TEST INDICATOR KIT• Expert Quality • Ideal all-round kit for engineers and apprentices• Contents: Metric dial test indicator with plunger (0-

25mm); metric dial test indicator with stylus (0-1.25mm); magnetic stand with fine adjustment; 22interchangeable tips for dial test indicator with plunger;

6mm and 8mm stylus’ for dial test indicator clamp

Stock No.46609


*TSP € 69.00 *TSP € 84.87

40120 BLADE METRIC SCREWPITCHGAUGE SET• Range 0.4-7.0mm

Stock No.45458


*TSP € 4.98 *TSP € 6.13

7324200mm ENGINEERS SCRIBER• Straight and 90° hardened points

Stock No.34099


*TSP € 4.40 *TSP € 5.41

37M37 PIECE METRIC TAP AND DIE SET• High carbon steel• Supplied with the correct drill bits for tapping• Contents: 8 metric dies, 8 metric taper taps, 8 metric

plug taps, 2 tap wrenches, die holder, 8 HSS twist drillsand screwpitch gauge

Stock No.79203


*TSP € 53.05 *TSP € 65.25

52MU52 PIECE COMBINATION TAP ANDDIE SET - METRIC, UNF AND BSP• High carbon steel• Supplied with the correct drill bits for tapping• Contents: 7 metric dies, 5 UNF dies, 2 BSP dies, 14

taper taps, 2 tap wrenches, dies holder, screwpitch

gauge, screwdriver centre punch and 5 screw extractors

Stock No.79204


*TSP € 77.50 *TSP € 95.33

75MM75 PIECE COMBINATION TAP ANDDIE SET - METRIC AND BSP• High carbon steel• Contents: 9 metric coarse dies, 8 metric fine dies, BSP

die, 17 metric taper taps, 17 metric plug taps(bottoming), taper tap, 2 tap wrenches, die holder, drill

bits for tapping, screwpitch gauge and screwdriver

Stock No.79205


*TSP € 92.70 *TSP € 114.02

22TF

METRIC THREAD RESTORING FILE• For internal and external threads

• Metric: 080-100, 175-200, 150-125 and 300-250

Stock No.68703


*TSP € 25.80 *TSP € 31.73

engineering tools

metric dial test

indicator

These engineering-type tools are manufactured to the highest standards for professional use. All draper tools are fully guaranteed for complete peace of mind.



1BSCHRÖDER 5 PIECE SCREWEXTRACTOR SET• Expert Quality • Contents: one of each

size; 1 (3-6mm), 2 (6-8mm), 3 (8-11mm),4 (11-14mm) and5mm (14-18mm)

• Chromevanadiumsteel

150mm ENGINEERS BENCH VICE• Quality cast iron body with steel screw and handle• Hardened carbon steel interchangeable jaws

Stock No.45232


*TSP € 76.02 *TSP € 93.50

150mm SOFT JAWS FORENGINEERS VICES• Expert Quality • Aluminium with heavy duty soft

rubber face to prevent marking• Supplied with heavy

duty magnetswhich stickto the faceof the vicejaws

TDS-28

28 PIECE METRICTAP AND HSSDRILL SET• All-round set comprising

seven sizes of tap (taper,secondary and bottoming)and seven HSS drills

• Contents: Taper,secondary andbottoming taps size: 3 x0.3, 4 x 0.7, 5 x 0.8,6 x 1.0, 8 x 1.25,10 x 1.5 and12 x 1.75

Stock No.40891


*TSP € 28.40 *TSP € 34.93

SEDS-1010 PIECEMETRIC SCREWEXTRACTOR ANDHSS DRILL SET• Spiral pattern extractors

with square drive endsmanufactured fromquality steel

• Contents: ScrewExtractors: 1 (3-6mm), 2(6-8mm), 3 (8-11mm), 4(11-14mm) and 5(14-18mm); HSSDrills: 2.0, 3.0,4.0, 6.6 and7.5mm

Stock No.40892


*TSP € 24.75 *TSP € 30.44

300mm BI-METALHACKSAW BLADES• Expert Quality • HSS welded to carbon steel• Pack of ten blades

Stock List Price List Price *TSP *TSPNo. TPI ex. VAT Inc. VAT ex. VAT Inc. VAT

19347 18 €22.66 €27.87 €13.80 €16.9719348 24 €22.66 €27.87 €13.80 €16.9738266 32 €22.66 €27.87 €13.80 €16.97

150mm JUNIOR HACKSAW BLADES• Expert Quality

• Professional Quality to BS6271 • 32TPI• For cutting metal and plastics • Pinned at both ends

Order number of cards/bags required (see table)

Stock List Price List Price *TSP *TSPNo. Quantity ex. VAT Inc. VAT ex. VAT Inc. VAT

69305 10 blades per card €2.95 €3.63 €2.05 €2.5269306 100 blades per bag €23.74 €29.20 €14.95 €18.39

4920

300mm HEAVY DUTY SOFT GRIPHACKSAW FRAME• Expert Plus Quality • Traditional pattern with

an adjustable frame for 300mm blades • Lever onsaw bow releases blade for easy change • Framehas two sets of blade spigots which allows straightor 45° cutting • Supplied with a 300mm HSS blade

Stock No.31234


*TSP € 5.95 *TSP € 7.32

Stock No.05719


*TSP € 21.54 *TSP € 26.49

1310SOFT GRIP MINI SAW WITH POWDERCOATED FRAME• Uses junior hacksaw blades (150mm) • Powder

coated metal frame with shaped soft grip handle foruser comfort and control and blade tensioner • Forcutting metal, wood, plastics etc.

Stock No.14180


*TSP € 8.60 *TSP € 10.58

Stock No.45856


*TSP € 9.00 *TSP € 11.07

Hacksaw frames and bladesThe Draper Expert Plus Qualityhacksaw frame (shown right) is made toextremely high specifications and hastwo sets of blade spigots for straight or45° cutting...



CP12

12 PIECE CHISEL AND PUNCH SET• Contents: 4 cold chisels, taper punch, 2 parallel pin

punches, 2 parallel taper pin punches, centre punch,point chisel and cross chisel

Stock No.13039


*TSP € 21.02 *TSP € 25.85

GT807

125mm AUTOMATIC CENTRE PUNCH• Expert Quality • Heavy duty spring-loaded hardened

steel point • Adjustable striking force

Stock No.13612


*TSP € 8.65 *TSP € 10.64

4884/12C12 PIECE 140mm NEEDLE FILE SET• Contents: flat hand; flat taper; joint;

taper round; half round;square; threesquare;oval;crossing;crochet;barretteand knife

• Mouldedplastichandles

Stock No.36325


*TSP € 6.75 *TSP € 8.30

8106B/4

4 PIECE 200mm SOFT GRIPENGINEERS FILE SET• Contents: flat, half round, round and three square• High carbon steel with soft grip handles with and

hang hole

Stock No.44962


*TSP € 13.98 *TSP € 17.20

Stock No.63976

EX. VAT INC VAT


*TSP € 5.00 *TSP € 6.15

HVRS2 PIECE EXTRALARGE HIGHVISIBILITYRAIN SUIT• Expert

Quality • Two-piece

suit -jacket andtrousers

• Concealed hood• Heavy duty zip

Stock No.64022

EX. VAT INC VAT


*TSP € 14.40 *TSP € 17.71

BOILER SUITS• Polyester cotton

• Stud fastening frontStock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT

37813 M €29.38 €36.13 €17.95 €22.0837814 L €29.38 €36.13 €17.95 €22.0863980 XL €29.38 €36.13 €17.95 €22.08

HVWCHIGHVISIBILITYEXTRA LARGEWAISTCOAT• Expert Quality • Conforms to EN471

Class 2 • Lightweighttough polyestermaterial • Highquality reflectivestrips • Hook andloop front fastening

personal protective

equipmentThe next few pages feature some essential safety equipment for use aroundthe workshop,building site or other industrial workplace.



SAFETY SHOE TRAINERS WITH METALTOECAPS TO S1PA• General work shoe-style trainers with metal toecap and mid-sole• Suede leather uppers • Anti-static with heel absorption• Manufactured to EN20345; 2004 S1PA

Stock List Price List Price *TSP *TSPNo. Sizes GB/EU ex. VAT Inc. VAT ex. VAT Inc. VAT

49407 4/37 €50.06 €61.58 €38.70 €47.6049408 5/38 €50.06 €61.58 €38.70 €47.6049409 6/39 €50.06 €61.58 €38.70 €47.6049312 7/41 €50.06 €61.58 €38.70 €47.6049313 8/42 €50.06 €61.58 €38.70 €47.6049314 9/43 €50.06 €61.58 €38.70 €47.6049315 10/44 €50.06 €61.58 €38.70 €47.6049316 11/46 €50.06 €61.58 €38.70 €47.60

49410 12/47 €50.06 €61.58 €38.70 €47.6012191 Spare Laces €1.73 €2.13 €1.55 €1.91

WATER-RESISTANT SAFETY BOOTSWITH METAL TOECAPS TO S3• General work wear boots with metal toecap and mid-sole

essential for site work • Water-resistant• Leather uppers • Anti-static with heel absorption• Manufactured to EN20345; 2004 S3


49327 7/41 €72.19 €88.80 €53.95 €66.3649328 8/42 €72.19 €88.80

€53.95 €66.3649330 9/43 €72.19 €88.80 €53.95 €66.3649331 10/44 €72.19 €88.80 €53.95 €66.3649470 11/46 €72.19 €88.80 €53.95 €66.3649412 12/47 €72.19 €88.80 €53.95 €66.3612192 Spare Laces €1.73 €2.13 €1.55 €1.91

SAFETY WELLINGTON BOOTS WITH METALTOECAPS TO S5• General work wear boots with metal toecap and mid-sole essential for site

work • Rubber 100% waterproof uppers with puncture protection• Anti-static with heel shock absorption • Manufactured to EN20345; 2004

S5

Stock Sizes List Price List Price *TSP *TSPNo. GB/EU ex. VAT Inc. VAT ex.VAT Inc.VAT

02697 7/41 €21.31 €26.21 €16.79 €20.6502698 8/42 €21.31 €26.21 €16.79 €20.6502699 9/43 €21.31 €26.21 €16.79 €20.6502700 10/44 €21.31 €26.21 €16.79 €20.6502701 11/46 €21.31 €26.21 €16.79 €20.6502702 12/47 €21.31 €26.21 €16.79 €20.65

SSP12UVSAFETY SPECTACLES WITH UVPROTECTION AND FLEXIBLE FRAME• Expert Quality • Single lens design with integral side shielding.• Flexible frame allows contoured fit for all sizes of face• UV and anti-scratch lens

Stock No.11969


*TSP € 6.60 *TSP € 8.12

PSGPROFESSIONAL SAFETY GOGGLES• Expert Quality • Conforms to EN166.1 Safety Specification Category 2

• Traditional pattern with indirect ventilation• Anti-mist polycarbonate lens• For protection against particles i.e cinders, low grade

debris etc.• Impact-resistant polycarbonate

Stock No.79363


*TSP € 6.22 *TSP € 7.65

Stock No.43276


*TSP € 9.07 *TSP € 11.16

SAFETY BOOT TRAINERS WITH METALTOECAPS TO S1PA• General work boot-style trainers with metal toecap and mid-

sole essential for site work • Suede leather uppers• Anti-static with heel absorption• Manufactured to EN20345; 2004 S1PA


49398 4/37 €53.21 €65.45 €39.90 €49.0849399 5/38 €53.21 €65.45 €39.90 €49.0849400 6/39 €53.21 €65.45 €39.90 €49.0849303 7/41 €53.21 €65.45 €39.90 €49.0849304 8/42 €53.21 €65.45 €39.90 €49.0849305 9/43 €53.21 €65.45 €39.90 €49.0849306 10/44 €53.21 €65.45 €39.90 €49.0849311 11/46 €53.21 €65.45 €39.90 €49.0849401 12/47 €53.21 €65.45 €39.90 €49.0812180 Spare Laces €1.73 €2.13 €1.55 €1.91

safety footwear A robust range ideal for use in the workshop...

disposable dust

masksFM11/50

50 DISPOSABLE NUISANCE

DUST MASKS• Masks without valve offering basic protection• Box of 50



FM8/P2VDISPOSABLE DUST MASK FORWELDING• Conforms to EN149-FFP2• With carbon filter for

protection againstwelding fumes (finemetal particulates),ozone (as a by-product ofTIG/MIG welding,nuisance organicvapours, finetoxic dust fibresand aqueousmist

FM10

TWIN PACK OF FFP2 MOULDED DUSTMASKS• Conforms to EN149-FFP2 • Mask with valve offering

protection from solid and liquid aerosol variants• Adjustable straps for contoured fit• Assigned protection level

(APF) 10 x WorkplaceExposure Limit(WEL) for fine non-toxic dusts, fibres,fumes and mists

Order number of

packs required (2per pack)

EM1

EARDEFENDERS• Protection to

CE96 Conforms

to EN 352-1:2001specification

• Lightweightand robustear defenderproviding cost-effective protection

• Durable high-impactpolystyrene

Stock No.19154


*TSP € 7.15 *TSP € 8.79

EP5050 PAIRS OF EAR PLUGSIN PLASTIC JAR• Manufactured to

EN352-2:2002

Specification• Sof t PU foamwhich gives highperformanceprotection

• Tapered designwhich reverts tooriginal shapeafter use

• Nominaldiameter: 12mm

KP7FOAM KNEE PADS• Expert Quality • Thick foam knee pads with gel-effect

cushions • Pads are secured with hook and loop straps• Complies with EN 14404:2004

Stock No.43912


*TSP € 11.99 *TSP € 14.75

KS14

355mm KEVLAR PROTECTIONSLEEVE• Expert Quality • Ideal for sheet metal and plate glass

work • Designed to prevent cuts to forearm • Thumbslot ensures sleeve will remain in position whilstwearing • Knitted cotton shell• Manufactured to BS EN 388Specification 1.3.4.X

Stock No.12237


*TSP € 7.85 *TSP € 9.66

LG-100

BOX OF 100 LATEX GLOVES• 100% pure latex starch-powdered for easy pull-on• Ambidextrous fit-

one size (large)

NG-100BOX OF 100 NITRILE GLOVES• All-purpose glove ideal for use as a barrier layer• Gloves have the puncture resistance of latex• Guaranteed free from allergenic latex proteins so

can be used by personnel with an allergy to latex• Low stress properties reduce hand fatigue• EN455 Parts 1, 2 & 3 and EN374 Parts 2 and 3

Specifications

Stock No.41400


*TSP € 9.27 *TSP € 11.40

Stock No.88628


*TSP € 4.35 *TSP € 5.35

Stock No.69600


*TSP € 5.30 *TSP € 6.52

Stock No.12213


*TSP € 9.85 *TSP € 12.12

SAFETYHELMETS• To EN 937• High density

polyethylene shell• Rated zero VAT

in UK

Stock List Price List Price *TSP *TSPNo. Colour ex. VAT Inc. VAT ex. VAT Inc. VAT

54868 Yellow €9.84 €12.10 €6.20 €7.6363307 White €9.84 €12.10 €6.20 €7.6363308 Blue €9.84 €12.10 €6.20 €7.63

Stock No.54780


*TSP € 9.50 *TSP € 11.69

quality gloves -



MECHANICSGLOVES• Expert Quality • Leather palm and

reinforced thumb join• Latex coated panels to

fingertip and palm forextra grip

• Oil and grease resistant• Elasticated cuffs


12248 Large €24.22 €29.79 €14.25 €17.5312250 Extra Large €24.22 €29.79 €14.25 €17.53

HDLIG

HEAVY DUTY LEATHER INDUSTRIALGLOVES• Expert Quality • Heavy duty blue chrome split

leather palm, thumb and knuckle guard • Cottonbacked with elasticated wrist band and rubber cuff

• Size large

PVCG14350mm PVC GAUNTLETS• PVC dipped with open cuff for protection against

acid, alkali and grease• Ideal for use when parts cleaning and washing

Stock No.12257


*TSP € 2.40 *TSP € 2.95

CLOSE FIT GLOVES• Expert Quality • Highly

flexible close fit gloveswith polyurethane linedpalms, nylon lining andelasticated wristbands

• Ideal for generalindustrial use


10945 M €4.56 €5.61 €3.00 €3.6910947 L €4.56 €5.61 €3.00 €3.6910948 XL €4.56 €5.61 €3.00 €3.6949426 L (Bag of 10) €31.99 €39.35 €14.35 €17.65

WET WORKGLOVES• Expert Quality • Heavy fabric glove

and PVC coating


10927 Medium €3.36 €4.13 €2.05 €2.5212229 Large €3.36 €4.13 €2.05 €2.52

EMERGENCY STERILE EYE WASH STATION

• Wall mountable with mirror• 2 x 500ml bottles of single use sterile sodium chloride solution


43065 Eye Wash Station €46.85 €57.62 €23.40 €28.7843066 Refill €12.31 €15.14 €7.40 €9.10

Stock No.10926


*TSP € 3.94 *TSP € 4.85

for professionals

Guaranteed Quality ToolsSince 1919...Established in 1919, the family

owned company has been tradingin the UK and Republic of Ireland forover 90 years.

The Company’s philosophy issimple - high quality products atcompetitive prices.All products arethoroughly tested prior to leavingthe manufacturer and on theirarrival at Draper Tools’headquarters they are checked bythe in-house Quality AssuranceDepartment.

Much more information about theDraper Tool Company, its history,products and much,much more canbe found on the website...

www.draper.co.uk



FAKBSI-M

MEDIUM FIRSTAID KIT• BS8599-1:2011

CompliantWorkplace FirstAid Kit

• First aid kit indurable plasticbox withcarrying handle

Stock No.07829


*TSP € 31.50 *TSP € 38.75

FAKBSI-L

LARGE FIRSTAID KIT• BS8599-

1:2011CompliantWorkplaceFirst Aid Kit

• First aid kit indurableplastic boxwith carryinghandle

Stock No.07830


*TSP € 40.20 *TSP € 49.45

FIRE1B1kg DRY POWDER FIREEXTINGUISHER• Effective on petrol, oil, gas,

paint, wood, solvents andelectrical equipment

• For use on class A, Band C fires, rating5A/34B

• Approved to BS EN 3-7:2004+A1:2007

• Halon-free• Suitable for marine use• Wall mountable

FIRE2B2kg DRY POWDERFIREEXTINGUISHER• Effective on petrol, oil,

gas, paint, wood,solvents and electricalequipment

• Use on Class A, B and Cfires rating 13A/89B

• Approved to BS EN 3-7:2004+A1:2007

• Halon-free• Wall mountable• Pressure gauge• Five year warranty

Stock No.04939


*TSP € 32.50 *TSP € 39.98

FIREST1SINGLE FIREEXTINGUISHERSTAND• Suitable for fire

extinguishers with amaximum diameter of240mm

• Freestanding, for use inpublic buildings, hotels,offices, schools, foodpreparation areas etc.

• Chemical resistant PE forlong life

Stock No.12272


*TSP € 35.95 *TSP € 44.22

FIREST2

DOUBLE FIRE EXTINGUISHER STAND• Suitable for fire

extinguishers with amaximum diameterof 240mm

• Freestanding, foruse in publicbuildings, hotels,offices, schools,food preparationareas etc.

• Chemical resistantPE for long life

FAKBSI-S

SMALL FIRST AID KIT• BS8599-1:2011

Compliant WorkplaceFirst Aid Kit

• First aid kit indurable plastic boxwith carryinghandle

Stock No.07828


*TSP € 21.60 *TSP € 26.57

safety first!For the full range

of safety gearavailable from

Draper Tools andto find a stockist - visit the website

draper.co.uk

Stock No.12275


*TSP € 56.35 *TSP € 69.31

Stock No.22185


*TSP € 21.60 *TSP € 26.57

fire extinguishersMany commercial premises must have fire extinguishers, for details of ourfull range ask your stockist or visit www.draper.co.uk



SPILL DRIP TRAYS• Heavy duty HDPE• Protects workplace when charging and discharging

oils, chemicals and other liquids• Can be used with/without non-slip platform• Stackable for easy transportation and storage

Stock List Price List Price *TSP *TSPNo. Capacity ex. VAT Inc. VAT ex. VAT Inc. VAT

12263 20L €58.87 €72.41 €46.75 €57.5012266 30L €62.16 €76.46 €49.50 €60.89

ODC

205L DRUM CRADLE• For lifting, tilting and manoeuvring 205L (55 gallon)

drums around work areas • 65mm diameter wheelswith transport handle

Stock No.43966


*TSP € 61.80 *TSP € 76.01

SPILL KIT L

45L OIL AND FUEL SPILL KIT• Kit containing many items to deal with an oil or fuel

spillage • Carried in a high visibility shoulder bagwith strap and double pull zip • Contents: 2 x 3Mlong spill socks; 25 absorption pads size 400 x500mm (approx.); Plastic drain plug rug size 650 x450mm (approx.); waste disposal bag with zip tiesize 1M x 6M - flat-approx.); PVC protective glovesto CE standard 4121 and laminated instruction andchecklist sheet

Stock No.44106


*TSP € 128.70 *TSP € 158.30

BLACK SAFETY GRIP TAPE ROLLS• Self adhesive tape helps to prevent slips and falls• For use on steps, ladders and other outdoor slippery surfaces

Stock List Price List Price *TSP *TSPNo. Length/Width ex. VAT Inc. VAT ex. VAT Inc. VAT

63383 3.7M/25mm €8.93 €10.98 €5.99 €7.3763384 3.7M/50mm €19.37 €23.82 €13.15 €16.1766234 18M/50mm €37.10 €45.64 €22.20 €27.31

TP-S/GRIP/HZ18M x 50mm BLACK AND YELLOWSAFETY GRIP TAPE ROLL• Self adhesive tape helps to prevent slips and falls• For use on steps, ladders and other outdoor

slippery surfaces

Stock No.65440


*TSP € 27.00 *TSP € 33.21

safety grip tape rolls

SPILL-4FOUR DRUM SPILLCONTAINMENTPALLET• Heavy duty for the

storage of chemicaland oil-based

products • 100%polyethyleneconstruction forexcellent chemicalresistance, thispallet assists in thecompliance withenvironmentalprotection obligationsby providing staticspill containment

• Removable deck for cleaning andinspection • Capacity 250L • Overalldimensions: 1380 x 1290 x 280mm

SPILL-2TWO DRUM SPILL CONTAINMENTPALLET• Heavy duty for the storage of chemical and oil-

based products • 100% polyethylene constructionfor excellent chemical resistance, this pallet assistsin the compliance with environmental protectionobligations by providing static spill containment

• Removable deck for cleaning and inspection• Overall size: 1300 x 750 x 400mm • Capacity 250L

Stock No.44058


*TSP € 222.60 *TSP € 273.80

Stock No.44059


*TSP € 253.50 *TSP € 311.81



TP-BAR

500M x 75mm RED AND WHITEBARRIER TAPE ROLL• For marking out no-go areas • Non-adhesive

Stock No.66041


*TSP € 8.40 *TSP € 10.33

TP-PTFE12M PLUMBERS PTFE TAPE• Plastic reel with dust cover• NOT suitable for use on gas pipework

Stock No.63389


*TSP € 0.95 *TSP € 1.17

CTP5

650 PIECEASSORTED NYLONCABLE TIE PACK• 650 (approx) mixed sizes

Stock No.56232


*TSP € 13.14 *TSP € 16.16

WB-HD/IS

310mm HEAVY DUTY 4 ROW WIRESCRATCH BRUSH WITHSCRAPER• Wood handle incorporates

scraper and hang hole

Stock No.31565


*TSP € 4.65 *TSP € 5.72

48643 PIECE 230mm BRUSH SET• Contents: three brushes -

brass, nylon and stainlesssteel

Stock No.26928


*TSP € 4.75 *TSP € 5.84

CHAMOIS LEATHERS• For cleaning windows, car paintwork and other similar surfaces• Natural oil-dressed chamois leather


44250 Sml: 1.5 sq.ft. €9.91 €12.19 €6.30 €7.7544251 Med: 2.0 sq.ft €12.84 €15.79 €8.10 €9.9644252 Lge: 2.5 sq.ft. €15.65 €19.25 €9.90 €12.18

C7A

MICROFIBRE CLOTH• Provides superior cleaning results without the need of

chemicals • Can be washed and re-used up to 500times • Size: 380 x 380mm

Stock No.76681


*TSP € 2.05 *TSP € 2.52

WB/I

290mm WIRE SCRATCH BRUSH• Wood handle incorporates hang hole• 4 rows

Stock No.31570


*TSP € 2.50 *TSP € 3.08

TP-HAZ33M x 50mm RED AND WHITEHAZARD TAPE ROLL• Self adhesive PVC tape

Stock No.69010


*TSP € 5.40 *TSP € 6.64

POLYPROPYLENE ROPE• Multi-purpose monofilament rope manufactured from

weather-resistant polypropylene

Stock List Price List Price *TSP *TSPNo. Length/Dia. ex. VAT Inc. VAT ex. VAT Inc. VAT

11675 15M/10mm €9.84 €12.10 €6.02 €7.4011673 30M/6mm €9.24 €11.37 €5.99 €7.37

chamois

leathers



2M HEAVY DUTY SQUARE LINK SECURITY CHAIN• Expert Quality • Hardened square link chain• Nylon cover to protect locked item• Thickness: 10mm



*TSP € 51.00 *TSP € 62.73

KI/48

48 PIECE KEY TAG ASSORTMENT• Coloured plastic indicator for keys• Comprises eight of each of the following colours:

orange, black, yellow, green, white and blue



*TSP € 3.85 *TSP € 4.74

HEAVYDUTY SOLIDSTEEL PADLOCKS

WITH SHROUDED SHACKLE• Expert Quality • Steel lock body with electric coating and super

tough molybdenum steel shackle• Changeable six pin brass lock cylinder• Special bumper to prevent damage to locked item• Draper Security Rating: 10 out of 10


64196 46mm €60.02 €73.83 €31.80 €39.1164197 50mm €76.49 €94.08 €42.40 €52.1564198 61mm €132.50 €162.98 €75.15 €92.43

63mm HEAVY DUTYSOLID STEEL PADLOCKSWITH EXTRA LONG SHACKLE• Expert Quality • Steel lock body with electric coating and

super tough molybdenum steel shackle• Changeable six pin brass lock cylinder• Dual steel ball mechanism• Draper Security Rating: 9 out of 10


No. Shackle Length ex. VAT Inc. VAT ex. VAT Inc. VAT64206 25mm €49.18 €60.49 €28.25 €34.7564207 50mm €51.31 €63.11 €29.40 €36.1664208 75mm €51.91 €63.85 €29.70 €36.53

HEAVY DUTY SOLIDSTEEL PADLOCKS• Expert Quality • Steel lock body with electric coating and

super tough molybdenum steel shackle• Changeable six pin cylinder• Dual steel ball mechanism• Draper Security Rating: 9 out of 10


64192 46mm €35.42 €43.57 €20.25 €24.9164193 54mm €44.52 €54.76 €24.75 €30.4464194 61mm €66.07 €81.27 €36.99 €45.5064195 70mm €85.01 €104.56 €46.79 €57.55

professional security...

KC/96

96 HOOK KEY CABINET• Heavy duty gauge steel cabinet with lock• Supplied with stick-on reference numbers, wall

fixings and two keys• Size: 300 x 240 x 75mm

Stock No.63806


*TSP € 39.00 *TSP € 47.97

KEYED ALIKEVERSION AVAILABLE




Look for the "KEYED ALIKE VERSION AVAILABLE" logo onmany of our padlocks. For asmall charge we can customizeyour padlocks as a "keyed alike" version and can supply as manyas you require with onecombination of lock.

Contact the Draper Help Line on+44 (0)23 8049 4344 for further

information on this service.



CHD182VLI18V CORDLESS COMBI HAMMERDRILL WITH TWO LI-IONBATTERIES• Expert Quality • Johnson 700 motor• Spindle lock for easy

bit change• Variable speed control• 24 position torque control• Two speed gearbox• 13mm keyless chuck• Electric brake• Overload protection• Forward/reverse facility• Side handle

• Soft grip handle• LED worklight• Supplied with: one

screwdriver bit, carrying case, two x1.3Ah Li-ion battery packs and 230VAC one hour universal fast charger

Specification:Drilling capacities:Mild Steel ... 12mmWood ... 26mmMasonry ... 13mmMaximum torque ... 35NmSpeed (no load) ... 0-350/1400r/minBlows per minute ... 18,000maxChuck capacity ... 2-13mmSpindle thread ... 1/2" x 20UNFWeight (inc. battery pack) ... 1.91kg

Stock No.03286


*TSP € 200.41 *TSP € 246.50

Stock No.41452


*TSP € 74.11 *TSP € 91.15

professional power toolsOur award-winning Draper Expert Power tools have been designed for the discerningprofessional.This range has the features and reliability demanded in the busy workshop. All the machines shown on this page have full after sales service and a two year warranty.

Stock No.13510


*TSP € 430.80 *TSP € 529.88

Stock No.13507


*TSP € 306.00 *TSP € 376.38

CIW144VK

14.4V CORDLESS 1/2" Sq. Dr.IMPACT WRENCH WITH TWO Ni-CD

BATTERIES• Expert Quality • Compact high torque motor

(176Nm)• Variable speed control• External changeable

carbon brushes• Electric brake• Forward/reverse facility• Battery level indicator• Soft grip handle and trigger• Supplied with carrying

case, 2 x 14.4V1.7Ah Ni-CDbatterypacks and230V AC onehour fast

charger

Specification:Maximum torque ... 176NmImpacts per minute ... 3000 max.Speed (no load) ... 0-2300r/minWeight (inc. battery pack) ... 1.9kg

Stock No.41424


*TSP € 177.60 *TSP € 218.45

CIW18LI

18V CORDLESS 1/2" Sq. Dr. IMPACTWRENCH WITH TWO LI-ION

BATTERIES• Expert Quality • Hi-torque motor

(472Nm max.)• Variable speed

control• Electric brake• Forward/reverse facility• Anti-slip soft grip• Supplied with carrying case,

2 x 18V 3.0Ah LI-IONbattery packs andone hour fastcharger


CIW19NMH19.2V CORDLESS 1/2" Sq. Dr.IMPACT WRENCH WITH TWO Ni-MH

BATTERIES• Expert Quality • Compact hi-torque

motor (519Nmmax.)

• Variable speedcontrol

• Electric brake• Forward/reverse facility• Anti-slip soft grip• Supplied with carrying case,

2 x 18V 2.0Ah Ni-MHbattery packs and230V AC onehour fast charger


HD750VK

710W 230V HAMMER DRILL WITHKEYLESS CHUCK

• Expert Quality • Variable speed

control withlock button

• Reversingfacility

• 13mm meta lkeyless chuck

• Soft griphandle• Adjustable side

handle withmetal depth rod

• Supplied with carrying case, 3M (approx.)cable and approved plug

SpecificationDrilling capacities:Mild Steel ... 13mmWood ... 30mmMasonry ... 16mmChuck capacity ... 1.5-13.0mmSpeed (no load) ... 0-2600r/minSpindle thread ... 1/2" x 20UNFWeight ... 2.3kg



Stock No.41453


*TSP € 63.50 *TSP € 78.11

Stock No.41454


*TSP € 107.99 *TSP € 132.83

Stock No.44190

EX. VAT INC VAT

List Price € 149.45 List Price € 183.82*TSP € 119.92 *TSP € 147.50

AG1190

900W 230V 115mm ANGLE GRINDER• Expert Quality • Powerful motor• Soft start and constant electronics• Three position side handle • Spindle lock facility• Soft grip housing panel • Tool-free guard adjustment• Supplied with reversible locknut, flange, disc changing

spanner, 3M (approx.) cable and approved plug

Specification:Disc diameter ... 115mm (4.1/2")Bore diameter ... 22.2mmSpindle thread ... M14Speed (no load) ... 10,000r/minWeight ... 2.5kg

AG2232

2200W 230V 230mm ANGLE GRINDER• Expert Quality • Powerful motor • Soft start

electronics • Three position side handle • 180° rotatingrear handle • Soft grip handles • Spindle lock facility

• Supplied with reversible lock nut and flange, discchanging spanner, 3M (approx.) cableand approved plug

SpecificationMotor - 230V ... 2200WDisc diameter ... 230mm (9")Bore diameter ... 22.2mmSpindle thread ... M14Speed (no load) - 230V ... 6500r/minWeight ... 5.8kg

Specification;Drilling capacities:

Mild steel ... 10mmWood ... 25mmMasonry ... 12mmSpeed (no load) ... 0 -400/1100r/minChuck capacity ... 10mmSpindle thread ... 3/8" x 24UNFWeight (inc. battery pack) ... 2.5kg

CDH182V218V TWO SPEED CORDLESS HAMMER DRILL KITWITH TWO BATTERIES• Variable speed control • 17 position torque control• Electric brake • Reversing facility • Soft grip handle• Screwdriver bit storage compartment• Supplied with two double-ended screwdriver bits, 6 x screwdriver bits,

6 x HSS drill bits, bit adaptor, two 18V battery packs, carrying case and230V AC charger (1 hour approx.)

Stock No.40765


*TSP € 92.11 *TSP € 113.30

great value!This Draper Cordless Hammer DrillKit offers a great deal for the price; justcheck out the specification below...

HG2003

2000W 230VVARIABLE HEATHOT AIR GUN KIT• Expert Quality • Variableheat settings (50°C to 600°C)with LED heat display• Complete with four nozzles,

glass protection, reflector hook, concentrator andscraper • Supplied with 3M (approx.) cable andapproved plug

Stock No.14428

EX. VAT INC VAT


*TSP € 51.60 *TSP € 63.47

guaranteed!These Draper Expert hand

power tools areguaranteed for...

2years parts

1year labour

A range of professionalquality,highspecificationhand power

tools that areideal for

commercialworkshops/

garages

For the full rangeof power toolsavailable from

Draper Tools andto find a stockist -

visit the website

draper.co.uk

• Expert Quality • Softstart • Stepped speed adjuster

(100r/min per step) • Digital speeddisplay • Switch with lock-on facility• Soft grip rear handle • Spindle lock

button • External carbon brushes• Hook and loop backing pad for easy

bonnet change • Supplied with carryingcase, backing pad, wool bonnet, 3M

(approx.) cable and approved plug

AP1500K1500W 230V 180mm ANGLEPOLISHER

Specification:Backing pad (supplied) ... 180mm dia.Bore diameter ... 22.2 dia.Spindle thread ... M14Speed (no load) ... 1000-3000r/minWeight ... 4kg



HD19/16ACF650W 230V 16SPEED FLOOR STANDINGHEAVY DUTY DRILLSpecification:Drilling capacity ... 19mmChuck capaci ty ... 3-16mmCollar diameter ... 60mmSpindle taper ... M T2Speeds (r/min) ... 16 (120-3000)Swing ... 356mmSpindle travel ... 8 0mmColumn diameter ... 80mmTable size ... 290 x 290mmThroat depth ... 180mmBase size ... 460 x 275mmHeight ... 1650mmWeight ... 98kg

Stock No.42641

EX. VAT INC VAT


*TSP € 490.80 *TSP € 603.68

Stock No.05095


*TSP € 87.52 *TSP € 107.65

Stock No.14271


*TSP € 99.60 *TSP € 122.51

Stock No.36313


*TSP € 197.97 *TSP € 243.50

WDV50SS50L 1400W 230V WET AND DRY

VACUUM CLEANER WITHSTAINLESS STEELTANK AND 230VPOWER TOOLSOCKET• Auto power tool socket

allows the user toplug in a power toolup to 2200W andrun it directly offthe cleaner - usefulfor automatic dustextraction

• Selection ofaccessories

Specification:Max. vacuum pressure ... 26KPa (260mbar)Max. air flow ... 70L/secTank volume ... 50LPower take off rating ... 2200WDimensions:- height (inc castors) ... 720mm- base ... 440 x 440mmWeight ... 10kg

Stock No.48499


*TSP € 225.00 *TSP € 276.75

Stock No.42638

EX. VAT INC VAT


*TSP € 341.99 *TSP € 420.65

GD16/16AC550W 230V 16SPEED GENERALWORKSHOP

BENCH DRILLSpecification:Drilling capacity... 16mmChuck capacity ...3-16mmCollar diameter ... 60mmSpindle taper ... MT2Speeds (r/min) ... 16 (210-3340)Swing ... 330mmSpindle travel ... 80mmColumn dia. ... 7 0mmTable size ... 2 60 x 260mmThroat depth ... 160mmBase size ... 4 20 x 450mmHeight ... 990mmWeight ... 67kg

GHD150W150mm 370W 230V BENCH GRINDERWITH WIRE WHEEL AND LEDWORKLIGHT• One fine and one wire wheel • Grinding wheel

dresser supplied • Cable and approved plug

Specification:Grinding wheel diameter ... 150mmWire wheel diameter ... 150mmBore size ... 12.7mmSpeed ... 2850r/minWeight ... 10.2kg

GD625L150mm 370W 230V BENCH GRINDERWITH LED WORKLIGHT• One fine and one coarse grinding wheel• LED worklight• Grinding wheel dresser supplied• Approved plug and cable

Specification:Bore size ... 12.7mmSpeed ... 2850r/minWeight ... 9kg

WDV1818L 1500W 230V WALL MOUNTABLEWET AND DRY VACUUM CLEANERWITH REMOTE CONTROL• Extra long 7M long flexible

suction/blowing hose• Hand grip with remote

control on/off switchallows access to distantareas whilst cleaner ison the wall

• Hoses can beattached to asuction orblowing function

• Supplied with avariety ofaccessories

Specification:Max. vacuum pressure ... 19KPa (190mbar)

Max. air flow ... 65L/secTank volume ... 18LDimensions:- height ... 460mm- base ... 300 x 370mmWeight ... 9.4kg

stationarypower toolsOur stationary power tools have beendesigned for the discerning

professional.This range has thefeatures and reliability demanded inthe busy workshop.All the machinesshown on this page have full after salesservice and are fully guaranteed.



WDV15A

15L 1100W 230VWET AND DRYVACUUMCLEANER• Designed to pick

up wet and drymaterials

• Selection of35mm dia.accessories

Specification:Max. vacuum pressure ... 12KPa (120mbar)Tank volume ... 15LWeight ... 3.7kg

Stock No.13779


*TSP € 55.20 *TSP € 67.90

Stock No.14433


*TSP € 264.95 *TSP € 325.89

HPW40003000W 230V HEAVY DUTY HOTWATER PRESSURE WASHER WITHTOTAL STOP FEATURE• Expert Quality • Ideal for the rapid cleaning of cars,

vans, HGVs, agriculturalequipment and othercommercial applications

• The Total Stop Valveautomatically activatesand deactivates thehigh pressure cleaner

every time thetrigger isoperated thusincreasing thelife of themotor andreducingelectricityconsumption

• Supplied with8M of reinforcedhose, turbo lance,adjustable lance,heavy duty gun,wheels, cable andapproved plug

Specification:Outgoing water temp. ... 90°C (max.)Incoming water supply temp. ... 35°C (max.)Work ing pump pressure . .. 130bar (1885psi)Max. pump pressure ... 150bar (2175psi)Flow rate ... 10L/min (600L/hour)Weight ... 55kg

Stock No.13754


*TSP € 1734.02 *TSP € 2132.84

HPW30002100W 230V LIGHT DUTYHOT WATER PRESSUREWASHER WITH TOTALSTOP FEATURE• Ideal for the rapid cleaning of cars,

vans, motorbikes, garden furniture• The Total Stop Valve

automatically activates anddeactivates the highpressure cleaner everytime the trigger isoperated thusincreasing the lifeof the motor andreducing electricityconsumption

• Supplied with 8Mof reinforcedhose, turbo lance,adjustable lance,heavy duty gun,wheels, cable andapproved plug

Specification:Outgoing water

temp....80°C (max.)

Incoming water supply temp. ... 40°C (max.)

Working pump pressure . .. 100bar (1450psi)Max. pump pressure ... 135bar (1958psi)Flow rate ... 7L/min (420L/hour)Size approx (inc. handle) . .. 360 x 530 x 950mmWeight ... 39kg

Stock No.07735


*TSP € 834.95 *TSP € 1026.99

PPW5405.5HP PETROL PRESSURE WASHER• Expert Quality • Ideal for rapid cleaning

of large vehicles,caravans, farmequipment, boats,driveways

• For use where nomains poweravailable

• 4 stroke petrolengine

• Supplied with 8Mof heavy dutyreinforced highpressure hose,metal lancewith brassgun and fivenozzle

types

Specification:Engine ... 5.5HPDisplacement ... 163ccSpeed (no load) ... 3600r/minFlow rate ... 9L/min (540L/hr)Working pump pressure ... 145bar (2100psi)Max. pump pressure . .. 160bar (2320psi)Fuel tank capacity ... 3.6LWeight (dry) ... 35kg

Stock No.77593


*TSP € 418.69 *TSP € 514.99

PPW690

6.5HP PETROL PRESSURE WASHER• Expert Quality • Ideal for rapid cleaning of large vehicles, caravans, farm

equipment, boats, driveways• For use where no mains power available• 4 stroke petrol engine• Supplied with 8M of

heavy dutyreinforced highpressure hose,metal lance withbrass gun andfour nozzletypes

Specification:Engine ... 6.5HPDisplacement ... 196ccSpeed (no load) ... 3600r/minFlow rate ... 11.5L/min (690L/hr)Working pump pressure ...195bar (2800psi)Max. pump pressure . .. 200bar (2900psi)Fuel tank capacity ... 6LWeight (dry) ... 40kg

Stock No.03244


*TSP € 645.00 *TSP € 793.35

PW21102100W 230V PRESSURE WASHER

WITH TOTALSTOP FEATURE• For efficient cleaning

of vehicles, caravans,motor vans,driveways, boats etc.

• The Total Stop Valveautomaticallyactivates anddeactivates the highpressure cleanerevery time the triggeris operated thusincreasing the life ofthe motor andreducing electricityconsumption

• Supplied with 8M of

high pressure hoseon hose cart wheelwith gun, turbolance, adjustable fanjet lance, built-indetergent tank,wheels, cable andapproved plug

Specification:Working pump pressure ... 120bar (1740psi)Max. pump pressure . .. 140bar (2030psi)Flow rate ... 7L/min (420L/hour)Size approx. (inc. handle) ... 300 x 320 x 910mmWeight ... 19kg

pressure washers A great selection of pressure washersideal for cleaning cars and/orcommercial vehicles.They are alsosuitable for cleaning forecourts,driveways and much more...



PG25OF

2.2kVA/2.0kW PETROL GENERATOR• Expert Quality • Powered by 6.5HP petrol

engine • Recoil start• Steel tubular frame with

polyester coated finish• Oil and fuel resistant anti-

vibration mounts• Dual voltage output

110/230V• Overall size: 575 x 425 x

435mm• Supplied with spark plug

and screwdriver

Stock No.09697


*TSP € 394.80 *TSP € 485.60

PG3500R

3.5kVA/2.8kW PETROL GENERATOR• Expert Quality • Powered by Honda 6.5HP petrol engine• Heavy duty steel tubular frame with polyester

coated finish • Oil and fuelresistant anti-vibrationmounts • Dual voltageoutput 220/110V • Enginelow oil shutdown

• Maintenance-freealternator • Run time150min @ 75% load • Fueltank capacity 3.6L

• Overall size 600 x 410 x400mm • Weight 45kg

Stock No.43727


*TSP € 846.00 *TSP € 1040.58

FAN5

450mm 230V

INDUSTRIALFAN• Expert Quality • Chrome plated

safety grille• Three speed with

120° tilt• Fitted with cable

and approved plug

Stock No.71395


*TSP € 87.60 *TSP € 107.75

FAN6500mm 230VINDUSTRIALTELESCOPICFLOOR STANDINGFAN• Expert Quality • Variable height

adjustment from 1.3 to1.5M (approx.)

• Chrome plated grille• Three speed with tilt• Heavy duty cast iron base• Fitted with cable and

approved plug

Stock No.71396


*TSP € 126.00 *TSP € 154.98

25HSS/S

25 PIECE METRICHSS TWISTDRILL SET• Expert Quality • Manufactured to DIN

338 and ISO235/1Specifications

• Contents: 1-13mm

Stock No.43696


*TSP € 36.99 *TSP € 45.50

Stock List Price List Price *TSP *TSPNo. ex. VAT Inc. VAT ex.VAT Inc. VAT

PWC8

8L PLASTICWATERING CAN

Stock No.43889


*TSP € 9.99 *TSP € 12.29

GHRS25M WIND-UP HOSE REEL KIT• Plastic frame with drum and wind-up handle• Flow through design with 1/2" hose connector• Supplied with 25M of 12mm hose; 3 x 1/2" hose

connectors; 1/2" hose connector with water stopfeature; 3/4" BSP tap connector with 1/2" BSP reducerand adjustable spray nozzle

Stock No.36211


*TSP € 35.36 *TSP € 43.49230V AC FOUR SOCKETINDUSTRIAL CABLE REELS• Max. load: 13A (fully

unwound)• Sturdy metal frame

with with easywind handle

• Stock No.89928 length:25M

• Stock No.89926 length:50M

89928 €76.49 €94.08 €33.54 €41.2589926 €141.58 €174.14 €60.15 €73.98

cleaning...



welders An updated range of weldingmachines suitable for the professionalworkshop.A range of weldingaccessories is available - see pages101-104 or visit www.draper.co.uk


Stock No.05570


*TSP € 226.80 *TSP € 278.96

Stock No.43950


*TSP € 586.79 *TSP € 721.75

Stock No.05566


*TSP € 978.00 *TSP € 1202.94

MW184ATPRO240A 230V GAS TURBO MIG WELDER• Expert Quality • Euro torch connector • Dinse earth

clamp • Six stage power setting • Variable wire speedcontrol • Thermal overload protection • Spot weld timer,burnback and soft start • Regulator sold separately •

Suppliedwith wheelkit andreinforcedgas bottlesupport

Specification:Phase ... SingleInput current ... 32AOutput amperage range ... 30 - 240AAmperage a t 60% duty . .. 125AWelding current settings ... 6No load voltage ... 39VWire sizes

mild steel ... 0.6 - 1.0mmstainless steel ... 0.8 - 1.0mmaluminium ... 0.8 - 1.0mm

Dimensions ... 505 x 840 x 765mmWeight ... 57kg

Stock No.05568


*TSP € 1074.00 *TSP € 1321.02

MW302AT PRO300A 230V GAS TURBO MIG WELDER• Expert Quality • Euro torch connector• Twelve stage power

setting • Variablewire speed control• Thermal overload

protection • Spotweld timer,burnback, soft start,2T and 4T modes

• Earth clamp •0.6/0.8mm and1.0/1.2mm wire feedrollers • Reinforcedbottle holder • 15kgwire spool capacity

• Regulator soldseparately

• Suppliedwith wheelkit, gas bottle holder and chain restraints, 1.5M of gashose, swivel joint Euro fit welding torch and earth

clamp

Specification:Rated max. supply current ... 42ARated eff. supply current ... 21.5AInput current ... 16AOutput amperage range ... 30 - 300AAmperage at 60% duty . .. 150AOpen circuit voltage ... 18.5 - 45VWire sizes

mild steel ... 0.6 - 1.2mmstainless steel ... 0.8 - 1.2mmaluminium ... 0.8 - 1.2mm

Max. welding thickness ... 10mm - mild steelWire spool capacity ... up to 15kgDimensions ... 520 x 900 x 1050mmWeight ... 90kg

Stock No.43952


*TSP € 1980.00 *TSP € 2435.40

AW223AT200A 230/400V TURBO ARC WELDER• Expert Quality • Continuous regulation of welding current• Thermal overload protection• Direct fit earth clamp and electrode holder• Supplied with wheel kit and transport handle

Specification:Input current ... 25A @ 230V, 16A @ 400VOutput amperage range ... 30 - 200AElectrode size ... 1.6 - 5.0mmNo load voltage ... 43.5 - 49V

Dimensions ... 260 x 440 x 310mmWeight ... 21kg

MW183ATPRO200A 230V GAS TURBO MIG WELDER• Expert Quality • Euro torch connector • Six stage

power setting • Variable wirespeed control

• Thermaloverloadprotection

• Spot weldtimer,burnback andsoft start

• 0.6/0.8mmwire feedroller

• Regulator soldseparately

• Supplied withwheel kit andswivel joint Eurofit welding torch

Specification:Phase ... SingleInput current ... 32AOutput amperage range ... 35 - 200AAmperage at 60% duty . .. 100AWelding current settings ... 6No load voltage ... 33VWire sizes

mild steel ... 0.6 - 1.0mmstainless steel ... 0.8mm

aluminium ... 0.8 - 1.0mmDimensions ... 410 x 710 x 540mmWeight ... 39kg

MW162AT

150A 230V GAS/GASLESS TURBOMIG WELDER• Expert Quality • Non-live direct fit safety torch • Four

stage power setting • Variable wire speed control •

Thermal overload protection • Earth clamp • Polarityswitch • 0.9/1.2mm and 0.6 wire feeder rollers • Up to5kg wire spool capacity • Regulator suppliedseparately • Supplied with wheelkit, spool of 0.9mm fluxcored wire andsupportsfor re-useable gasbottles

Specification:Rated max. supply current ... 25ARated eff. supply current ... 7.5AInput current ... 16AOutput amperage range ... 30 - 160AAmperage at 60% duty ... 75ANo load voltage ... 20 - 34VWire sizes

mild steel ... 0.6 - 0.8mmstainless steel ... 0.8mmaluminium ... 0.8 - 1.0mmFlux cored ... 0.9mm

Wire spool capacity ... up to 5kgDimensions ... 450 x 610 x 450mmWeight ... 31.5kg



Stock No.12018


*TSP € 286.80 *TSP € 352.76

Stock No.11973


*TSP € 250.80 *TSP € 308.48

Stock No.05575


*TSP € 270.00 *TSP € 332.10

Stock No.05574


*TSP € 310.80 *TSP € 382.28

Stock No.05579


*TSP € 1138.80 *TSP € 1400.72

weldingFor the full range of weldingmachines and accessories

available from Draper Tools andto find a stockist - visit the website

draper.co.uk

MWD170AT160A 230V GAS/GASLESS TURBOMIG WELDER• Non-live direct fit safety torch • Four stage power

setting • Variable wire speed control • Thermal overloadprotection • Earth clamp • Securing clips at rear toaccommodate gas bottles • Wheels for ease of movingaround work locations • Supplied with face mask andcombined chipping hammer/wire brush • Fitted withcable

Specification:Phase ... SingleInput current ... 16AOutput amperage range ... 40 - 160AAmperage at 20% duty . .. 120ANo load voltage ... 23-38VFiller wire sizes ... 0.6 - 1.2mmDimensions ... 610 x 370 x 450mmWeight ... 31kg

INV133

125A 230V MMA/TIG INVERTERWELDER KIT• Expert Quality • DC Scratch start• Hot start • Anti stick device• Thermostatic control • Fan assisted cooling• Supplied with electrode holder and earth lead, face

mask and welding brush, cable and carrying case

Specification:Input current ... 16AOutput amperage range ... 5-125A

Duty cycle at 60% ... 115AElectrode size ... 1.6-3.2mmOpen Circuit voltage ... 62VDimensions ... 275 x 130 x 170mmWeight ... 3.5kg

INV153

150A 230V MMA/TIG INVERTER

WELDER KIT• Expert Quality • DC scratch start• Anti stick device • Thermal overload protection• Fan assisted cooling • Supplied with electrode holder

and earth lead, face mask and welding brush, cableand carrying case

Specification:Input current ... 16AOutput amperage range ... 5-150AAmps at 40% duty cycle ... 150AElectrode size ... 1.6-4.0mmOpen Circuit voltage ... 75VDimensions ... 275 x 130 x 170mmWeight ... 3.8kg

MWD121AT120A 230V GAS/GASLESS TURBO

MIG WELDER• Non-live direct fit safety torch • Four stage powersetting • Variable wire speed control • Thermal overloadprotection • Earth clamp • Supplied with face mask andcombined chipping hammer/wire brush • Fitted withcable and approved plug

Specification:Input current ... 13AOutput amperage range ... 40 - 120AAmperage at 35% duty . .. 65ANo load voltage ... 21-36VFiller wire sizes ... 0.6 - 1.0mmDimensions ... 525 x 289 x 410mmWeight ... 25.6kg

TIG200H

200A 230V TIG HF WELDER• Expert Quality • Microprocessor-controlled inverter technology• TIG DC welding• Complete with Tig torch and earth clamp• Pre-gas and post-gas time adjustment• Variable slope down• TIG lift

Specification:Phase ... SingleRated power ... 5-7kWInput current ... 32AWelding current range . .. 5-200ATungstens ... 1.6 - 3.2mmDuty cycle ... 60% - 165ADimensions ... 400 x 160 x 260mmWeight ... 7.8kg



IPC35

35A 230V PLASMA CUTTER• Expert Quality • Microprocessor controlled inverter

technology • Suitable for cutting any electricallyconductive material • Thermal overload protection

• Supplied with plasma torch, earth leadand clamp • Supplied withplasma torch withinbuilt accidentalactivation block

Specification:Rated max. supply current ... 4kWCutting current range ... 5-35AInput current ... 32ACutting range ... 12mm (mild steel.)Open circuit voltage ... 480VAmperage at 60% duty ... 22A

Dimensions ... 362 x 173 x 264mmWeight ... 8.8kg

Stock No.05578


*TSP € 870.00 *TSP € 1070.10

IPC35C

35A 230V PLASMA CUTTER KIT• Expert Quality • Microprocessor controlled

inverter technology• Inbuilt air

compressor• Suitable for cutting

any electricallyconductive material

• Thermal overloadprotection

• Supplied withplasma torch withinbuilt accidentalactivation block

• Earth lead andclamp

Specification:Rated max. supply current ... 4kWCutting current range ... 5-35AInput current ... 32ACutting range ... 12mm (mild steel.)Open circuit voltage ... 480V

Amperage at 60% duty ... 22ADimensions ... 325 x 170 x 430mmWeight ... 13.4kg

Stock No.05577


*TSP € 1198.80 *TSP € 1474.52

SW2200N

2200A 230V STUD WELDER• Expert Quality • Stud gun with lead and slide

hammer attachment • Earth clamp • Adjustablewelding parameters • Power time settings • Thermalprotection • Single or continuous spot selection

• Direct fit gun and earth

Specification:Phase ... SingleInput current ... 16ARated max. supply current ... 4kWOutput amperage range ... 400-2200ANo load voltage ... 7.4V

Duty cycle ... 3.5%Torch cable length ... 3MEarth lead ... 2MDimensions ... 320 x 181 x 265mmWeight ... 20kg

Stock No.05576


*TSP € 658.80 *TSP € 810.32

WSP680SOLAR POWERED AUTO-VARIOSHADEWELDING HELMET• Industrial quality• 9-13EW shades immediately

weld is struck• Sensitivity control• Solar powered

Stock No.12034


*TSP € 51.50 *TSP € 63.35

WGH1SOLAR POWERED AUTO-VARIOSHADEWELDING AND GRINDING HELMET• Expert Quality • Camouflage finish • BS EN 379:1994

and BS EN 175:1997 approved • Solar poweredautomatic shading facilities whenarc is struck • Adjustableshading from DIN 9-13

• High impactpolymide nylon formaximumprotection

• Switching timeless than0.0004seconds

• Convenientswitch togrindingshade (4) onside ofhelmet

Stock No.35004


*TSP € 89.40 *TSP € 109.96

WGH2SOLAR POWERED AUTO-VARIOSHADEWELDING AND GRINDING HELMET• Expert Quality • Glassfibre effect finish • BS EN

379:1994 and BS EN 175:1997 approved• Solar powered automatic shading

facilities when arc is struck• Adjustable shading from

DIN 9-13• High impact

polymide nylon formaximumprotection

• Switching timeless than 0.0004seconds

• Convenientgrinding mode(shade 4)switch on sideof helmet

Stock No.35138


*TSP € 89.40 *TSP € 109.96

ASP100

400ml ANTI-SPATTERWELDING SPRAY• Prevents spatter adhesion on

welding equipment, jigs,workpieces and surfaces

• Prolongs tip and shroud life• Non-toxic, water-based and

CFC free

Stock No.05709


*TSP € 5.35 *TSP € 6.58



W706

10M x 10mm ACETYLENE HOSE• Fitted with 3/8" BSP swivel nut connectors either end• Manufactured in accordance with BS EN 559, 730

and 1256

Stock No.35023


*TSP € 30.90 *TSP € 38.01

W70810M x 10mm OXYGEN HOSE• Fitted with 3/8" BSP swivel nut connectors either end• Manufactured in accordance with BS EN 559, 730 and

1256

Stock No.35026


*TSP € 30.90 *TSP € 38.01

W70910M x 10mm PROPANE HOSE• Fitted with 3/8" BSP swivel nut connectors either end• Manufactured in accordance with BS EN 559, 730 and

1256

Stock No.35028


*TSP € 33.99 *TSP € 41.81

W738

10M x 6mm OXYGEN HOSE• Fitted with 1/4" and 3/8" BSP swivel nut connectors

either end• Manufactured in accordance with BS EN 559, 730 and

1256

Stock No.05516


*TSP € 21.85 *TSP € 26.88

W737

10M x 6mm ACETYLENE HOSE• Fitted with 1/4" and 3/8" BSP swivel nut connectors

either end• Manufactured in accordance with BS EN 559, 730 and

1256

Stock No.05515


*TSP € 21.85 *TSP € 26.88

HEAVY DUTY WELDING/CUTTING TORCH ASSEMBLY• Designed for sheet metal and the automotive trade

• Comprises three separate items: Heavy Duty Shank (Stock No. 35031) which carries oxygen and acetylene and controlsgas flow to nozzle; Heavy Duty Gas Mixer for combining oxygen and acetylene which also holds the welding nozzle (StockNo.35032) and a Heavy Duty Cutting Attachment (Stock No. 35033) which fits to Stock No. 35031

• Items can be purchased separately to make up a torch assembly


35031 Shank €87.07 €107.10 €49.80 €61.2535032 Gas Mixer €23.23 €28.58 €13.50 €16.6135033 C/Attachment €96.74 €119.00 €55.50 €68.27

LIGHTWEIGHT WELDING/CUTTING TORCH ASSEMBLY• Designed for light sheet metal and the automotive trade• Comprises three separate items: Lightweight Shank (Stock No. 35356) which carries oxygen and acetylene and controls

gas flow to nozzle; Lightweight Gas Mixer for combining oxygen and acetylene which also holds the welding nozzle (StockNo.35069) and a Lightweight Cutting Attachment (Stock No. 35072) which fits to Stock No. 35356

• Items can be purchased separately to make up a torch assembly


35056 Shank €80.16 €98.60 €45.90 €56.4635069 Gas Mixer €23.23 €28.58 €13.50 €16.61

35072 C/Attachment €96.74 €119.00 €55.50 €68.27

W73318/90 CUTTING TORCH• Oxy acetylene/ oxygen-propane cutting torch with flame

retardant handle

Stock No.35106


*TSP € 41.95 *TSP € 51.60

welding/cutting torchesSpecifically designed for sheet metal and the automotive trade.

St ock No. 35033

Stock No. 35031

Stock No.35032

Stock No. 35072

Stock No. 35056

Stock No.35069



SWAGED HEAVY DUTY NOZZLESFOR OXY ACETYLENE WELDING• Popular-sized heavy duty nozzles used with

traditional shank or welding mixers

Stock List Price List Price *TSP *TSPNo. Number Thickness ex. VAT Inc. VAT ex. VAT Inc. VAT

35035 No.2 1.2mm €6.86 €8.44 €4.75 €5.8435036 No.3 2.0mm €6.86 €8.44 €4.75 €5.8435037 No.5 2.6mm €6.86 €8.44 €4.75 €5.8435038 No.7 3.2mm €6.86 €8.44 €4.75 €5.8435040 No.10 4.0mm €6.86 €8.44 €4.75 €5.84

SWAGED LIGHTWEIGHTWELDING NOZZLES FOR OXYACETYLENE WELDING• For oxy acetylene welding or brazing• Copper swaged style nozzle

Stock List Price List Price *TSP *TSPNo. Size Thickness ex. VAT Inc. VAT ex. VAT Inc. VAT

35094 No.2 1.2mm €4.10 €5.05 €2.80 €3.4435097 No.3 2.0mm €4.10 €5.05 €2.80 €3.4435101 No.5 2.6mm €4.10 €5.05 €2.80 €3.44

35103 No.7 3.2mm €4.10 €5.05 €2.80 €3.4435104 No.10 4.0mm €4.10 €5.05 €2.80 €3.44

OXY ACETYLENE CUTTINGNOZZLES• For general purpose hand cutting• Improves economy of gases

Stock List Price List Price *TSP *TSPNo. Bore Thickness ex. VAT Inc. VAT ex. VAT Inc. VAT

35042 1/32" 3-6mm €8.66 €10.66 €5.95 €7.3235044 3/64" 5-12mm €8.66 €10.66 €5.95 €7.3235049 1/16" 10-75mm €8.66 €10.66 €5.95 €7.32

PROPANE CUTTING NOZZLES• Brass nozzle with chrome outer

Stock List Price List Price *TSP *TSPNo. Bore Thickness ex. VAT Inc. VAT ex. VAT Inc. VAT

35050 1/32" 3-6mm €8.66 €10.66 €5.95 €7.3235052 3/64" 5-12mm €8.66 €10.66 €5.95 €7.3235054 1/16" 10-75mm €8.66 €10.66 €5.95 €7.32

LIGHTWEIGHT OXY ACETYLENECUTTING NOZZLES• For use with torches for cutting mild steel

Stock List Price List Price *TSP *TSPNo. Size Thickness ex. VAT Inc. VAT ex. VAT Inc. VAT

05512 0.8mm 3-6mm €11.33 €13.93 €7.65 €9.4105513 1.2mm 5-12mm €11.33 €13.93 €7.65 €9.4105514 1.6mm 10-75mm €11.33 €13.93 €7.65 €9.41

W732WELDING NOZZLE CLEANER• A selection of stainless steel nozzle files for cleaning

holes in welding and cutting nozzles

Stock No.35105


*TSP € 1.85 *TSP € 2.28

W735

FLINT GUN• For the lighting of oxy

acetylene for welding orbrazing

Stock No.35108


*TSP € 2.75 *TSP € 3.38

W734FLINT CUP LIGHTER• For the lighting of oxy acetylene for welding or brazing

in draughty conditions• The cup shields the spark from extinguishing

Stock No.35107


*TSP € 1.50 *TSP € 1.85

W736GAS BOTTLE KEY

Stock No.35109


*TSP € 1.95 *TSP € 2.40

IN-LINE FLASHBACK ARRESTORS• Large sintered element coupled with non return valve• 3/8" BSP connectors

Stock List Price List Price *TSP *TSPNo. For ex. VAT Inc. VAT ex. VAT Inc. VAT

35018 Fuel €53.93 €66.33 €30.95 €38.0735019 Oxygen €53.93 €66.33 €30.95 €38.07

welding/cutting nozzlesFully guaranteed accessories for when only the best will do.



DA50/185050L 230V 1.1kW OIL-FREE VERTICALAIR COMPRESSORSpecification:Air displacement ... 6.3cfm (179L/min)

Free air delivered (FAD) ... 4.3cfm (123L/min)Input current ... 13ASpeed ... 2850r/minMaximum pressure ... 116psi (8bar)Number of cylinders ... 1Dimensions ... 490 x 400 x 900mmWeight ... 30kg

Stock No.05644


*TSP € 282.00 *TSP € 346.86

DA50/346TV50L 230V 2.4kW V-TWIN AIRCOMPRESSORSpecification:Air displacement ... 12.22cfm (346L/min)Free air delivered (FAD) ... 8.55cfm (242L/min)Input Current ... 13ASpeed ... 2850r/minMaximum pressure ... 116psi (8bar)Number of cylinders ... 2Dimensions ... 800 x 360 x 730mmWeight ... 40kg

Stock No.05633


*TSP € 310.80 *TSP € 382.28

DA50/400T

50L 230V 2.2kW V-TWIN AIRCOMPRESSOR• Expert Quality Specification:

Air displacement ... 12.7cfm (360L/min)Free air delivered (FAD)

at 8 bar ... 5.8cfm (165L/min)Input Current ... 13ASpeed ... 2580r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 1Dimensions ... 870 x 350 x 710mmWeight ... 39kg

Stock No.05643


*TSP € 342.00 *TSP € 420.66

Quality compressors A professional range of compressors including V-twin, belt driven, low noise and petrol types - a selection whichis simply perfect for use in premises like the commercial workshop/garage shown below...

V-twin aircompressors



DA50/320B50L 230V 1.5kW BELT-DRIVEN AIR COMPRESSOR• Expert Quality

Stock No.03237


*TSP € 438.01 *TSP € 538.75

Stock No.02857


*TSP € 569.91 *TSP € 700.99

DA100/365B

100L 230V 2.2kW BELT-DRIVEN AIR COMPRESSOR• Expert Quality

Stock No.03238


*TSP € 582.00 *TSP € 715.86

Stock No.22463


*TSP € 696.00 *TSP € 856.08

PALLETIZED DELIVERIESThe products marked with this logo can only be delivered on a pallet. Prior to purchase pleaseensure you have adequate facilities to unload palletized deliveries. Contact your Draper stockist forlocal information.

Specification:Air displacement ... 8.3cfm (235L/min)Free air delivered (FAD)at 116psi (8bar) ... 5.8cfm (165L/min)Free air delivered (FAD)at 145psi (10bar) ... 5.3cfm (150L/min)

Input Current ... 13A

Speed ... 1040r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 2Dimensions ... 870 x 400 x 700mm

Weight ... 48.5kg

Specification:Air displacement ... 12.9cfm (365L/min)Free air delivered (FAD)at 116psi (8bar) ... 8.3cfm (234L/min)Free air delivered (FAD)at 145psi (10bar) ... 8.0cfm (225L/min)

Input Current ... 13A

Speed ... 1375r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 2Dimensions ... 1070 x 450 x 770mm

Weight ... 61.5kg

DA100/310100L 230V 2.2kW BELT-DRIVEN AIRCOMPRESSOR• Expert Quality

Specification:

Air displacement ... 11.19cfm (310L/min)Free air delivered (FAD) ... 7.76cfm (200L/min)Input Current ... 13ASpeed ... 937r/minMaximum pressure ... 115psi (8bar)Number of cylinders ... 2Dimensions ... 990 x 490 x 790mmWeight ... 79kg

DA150/365C

150L 230V 2.2kW BELT-DRIVEN AIR COMPRESSOR• Expert

Quality

Specification:Air displacement ... 12.9cfm (365L/min)Free air delivered (FAD) ... 8.3cfm (234L/min)Input Current ... 13ASpeed ... 1375r/minMaximum pressure... 145psi (10bar)

Number of cyl inders ... 2Dimensions ... 1330 x 500

x 890mmWeight ... 110kg



quality compressorsFor the complete range of Draper compressors and details of approved Draper stockists -why not visit the website - www.draper.co.uk

DA150/392B

150L 230V 2.2kWSTATIONARY

BELT-DRIVEN AIRCOMPRESSOR• Expert Quality

Stock No.69337


*TSP € 774.00 *TSP € 952.02

DA200/580200L 415V 4.0kW BELT-DRIVEN AIR COMPRESSOR• Expert

Quality

Stock No.05637


*TSP € 1590.00 *TSP€ 1955.70

DA270/840270L 415V 5.5kW BELT-DRIVEN STATIONARY AIRCOMPRESSOR• Expert

Quality

Stock No.76120


*TSP€ 1884.00 *TSP€ 2317.32

DA270/1080270L 415V7.5kW BELT-DRIVEN AIRCOMPRESSOR• Expert Quality

Stock No.05639


*TSP € 3234.00 *TSP€ 3977.82

Specification:Air displacement ... 13.8cfm (390L/min)Free air delivered (FAD) ... 9.3cfm (262L/min)Input Current ... 16ASpeed ... 1420r/minMaximum pressure ... 145psi (10bar)Number of cylinders ...Dimensions ... 1370 x 400 x 800mmWeight ... 75kg

Specification:Air displacement ... 29.7cfm (846L/min)Free air delivered (FAD)

... 19cfm (541L/min)Input Current ... 32A

Speed ... 1370r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 2Dimensions ... 1550 x 500 x 1000mmWeight ... 147kg

Specification:Air displacement ... 20.5cfm (580L/min)Free air delivered (FAD)

at 8 bar ... 16.6cfm (471L/min)Input Current ... 16A 3 phase

Speed ... 1370r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 2Dimensions ... 1480 x 550 x 980mmWeight ... 116kg

Specification:Air displacement ... 38.1cfm (1080L/min)Free air delivered (FAD) at 8 bar ... 29.5cfm (835L/min)Input Current ... 32A 3 phaseSpeed ... 1100r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 2Dimensions ... 1500 x 500 x 1150mmWeight ... 176kg



DA50/260S50L 230V 1.8kW LOW NOISE AIRCOMPRESSOR• Expert Quality • Soundproof box over motor• Sound pressure level only 73dB(A) compared to

115dB(A) for an unprotected motorSpecification:Air displacement ... 9.2cfm (260L/min)Free air delivered (FAD)

at 8 bar ... 5.3cfm (150L/min)at 10 bar ... 4.9cfm (140L/min)

Input Current ... 13ASpeed ... 2850r/minSound pressure level ... 73dB(A)Maximum pressure ... 145psi (10bar)Number of cylinders ... 1Dimensions ... 1000 x 390 x 760mmWeight ... 50kg

Stock No.05640


*TSP € 1194.00 *TSP€ 1468.62

DA90/310S90L 230V 2.2kW V-TWIN LOW NOISEAIR COMPRESSOR• Expert Quality • Soundproof box over motor • Sound

pressure level only 69dB(A) compared to an average of93dB(A) for an unprotected motor

Specification:Air displacement ... 11cfm (310L/min)Free air delivered (FAD)


Input Current ... 13ASpeed ... 1420r/minSound pressure level ... 69dB(A)Maximum pressure ... 145psi (10bar)

Number of cylinders ... 1Dimensions ... 1150 x 480 x 885mmWeight ... 88kg

Stock No.05641


*TSP€ 1770.00 *TSP€ 2177.10

DA270/580/S270L 415V 4kW BELT-DRIVEN LOWNOISE AIR COMPRESSOR• Expert Quality • Soundproof box over motor• Sound pressure level only 71dB(A) compared to an

average of 93dB(A) for an unprotected motorSpecification:Air displacement ... 20.5cfm (580L/min)Free air delivered (FAD)


Input Current ... 16A 3 phase

Speed ... 1310r/minSound pressure level ... 71dB(A)Maximum pressure ... 145psi (10bar)Number of cylinders ... 2Dimensions ... 1120 x 600 x 1370mmWeight ... 193kg

Stock No.05642


*TSP€ 3090.00 *TSP € 3800.70

PDA50/33050L 1.8kW BELT-DRIVEN PETROL AIRCOMPRESSOR• Expert Quality Specification:Compressor:Air displacement ...11.7cfm (330L/min)Free air delivered (FAD) ... 8.2cfm (230L/min)Speed ... 1000r/minMaximum pressure ...145psi (10bar)Number of cylinders ... 2Dimensions ... 1000 x 410 x 870mmWeight ... 73kgPetrol engine:Size ... 5.5HP Honda GX160Type ... 4 stroke ohvFuel tank capacity ... 3.1L

Stock No.07224


*TSP€ 1866.00 *TSP€ 2295.18

low noise compressorsThese special Low Noise Compressors are idealfor use in environments where noise is an issue.Workshops in garages,schools etc.where thenoise level needs to be kept to a minimum butwork still needs to be carried out.The typicalreduction is up to 24% less noise pressure of anequivalent compressor.



5205PRO1/4" Sq. Dr. MINI COMPOSITE BODYSOFT GRIP AIR IMPACT WRENCH

• Expert Quality • Lower noise, low

vibration, high torque, twinhammer action with easyforward and reverse one-handoperation • Compact size andlightweight with ergonomic handle design for usercomfort • Composite body makes this a lightweight butrugged tool that reduces operator fatigue and the ‘coldsink’ effect

Specification:Free speed ... 11,000r/minAverage air consumption ... 4cfm (114L/min)Weight ... 1kg

Stock No.14256


*TSP € 115.19 *TSP € 141.68

5206PRO

3/8" Sq. Dr. MINI COMPOSITE BODYSOFT GRIP AIR IMPACT WRENCH

• Expert Quality • Lower noise, low

vibration, high torque,twin hammer action andreverse one-hand operation

• Compact size and lightweight with ergonomic handledesign for user comfort • Composite body makes this alightweight but rugged tool that reduces operatorfatigue and the ‘cold sink’ effect

Specification:Free speed ... 11,000r/minAverage air consumption ... 4cfm (114L/min)Weight ... 1kg

Stock No.14257


*TSP € 115.19 *TSP € 141.68

Stock No.43326


*TSP € 131.95 *TSP € 162.30

Reasons you should consider the

Draper Expert Quality air tool range...

SAFER TOOLS...Hand Arm Vibration(HAV) is the mostcommonly reportedworkplace disease. From

July 2010 the daily UKExposure Limit Value(ELV) is 5m/s2 A (8).These Draper Expert airtools can help assist inreaching this demandingnew legislation.For fullinformation and guidanceplease visit the HSEwebsite:www.hse.gov.uk/vibration

Silenced air exhausts toreduce workshop noise

Rotating air inlet to

prevent air line tangles

Compositebodies for light

weight and less user fatigue

Soft-grip body forcomfort and reduced

vibration

Compact sizefor “go anywhere" work

Variable speed for

versatility

These tools are designed for use in the professional workshop.With features to reduce weight, noiseand vibration ensuring they are comfortable to use,yet strong enough to get the job done. Check outthe specification panels for each tool to see how hard we’ve worked to get them right.

12 MONTH PARTS

AND LABOUR WARRANTYThe Draper Expert air tool range nowcomes with a 12 month guarantee -these are tough tools designed forworkshop use.

5202PRO3/8" Sq. Dr. COMPACT COMPOSITEBODY AIR IMPACT WRENCH• Expert Quality • Lower noise, low vibration, high torque, three speed,

twin hammer action with easy forward and reverseone-hand operation

• Compact size and lightweight with ergonomic handledesign for user comfort

• Rotating air inlet to prevent air lines tangling• The composite body makes this a lightweight but

rugged tool that reduces operator fatigue and the‘cold sink’ effect

Specification:Free speed ... 9000r/minAverage air consumption ... 4.4cfm (125L/min)Weight ... 1.2kg




Stock No.43327

EX. VAT INC VAT


*TSP € 131.95 *TSP € 162.30

Stock No.41096

EX. VAT INC VAT


*TSP € 119.95 *TSP € 147.54

Stock No.48413

EX. VAT INC VAT


*TSP € 303.50 *TSP € 373.31

5207PRO1" Sq. Dr. COMPOSITE BODY LONGNOSE AIR IMPACT WRENCH• Expert Quality • Lower noise, low vibration, high

torque, twin hammer action with easy forward andreverse one-hand operation • Compact size andlightweight with ergonomic handle design foruser comfort • 150mm long anvil • Rotatingair inlet to prevent air lines tangling

• Composite body makes this a lightweightbut rugged tool that reduces operatorfatigue and the ‘cold sink’ effect

Stock No.14211


*TSP € 406.80 *TSP € 500.36

Stock No.14199


*TSP € 98.09 *TSP € 120.65

Stock No.14210


*TSP € 98.09 *TSP € 120.65

5203PRO

1/2" Sq. Dr. COMPACT COMPOSITEBODY AIR IMPACT WRENCH• Expert Quality • Lower noise, low vibration, high

torque, three speed, twin hammer action with easyforward and reverse one-hand operation • Compact sizeand lightweight with ergonomic handle design for usercomfort • Rotating air inlet to prevent air lines tangling

• The composite body makes this a lightweight butrugged tool that reduces operator fatigue and the ‘coldsink’ effect

Specification:Free speed ... 11,000r/minAverage air consumption ... 4cfm (114L/min)Weight ... 1.2kg

5201PRO1/2" Sq. Dr. COMPOSITE BODY AIRIMPACT WRENCH• Expert Quality • Lower noise, low vibration, high

torque, twin hammer action with easy forward andreverse one-hand operation • Rotating air inlet toprevent air lines tangling • The composite body makesthis a lightweight but rugged tool that reduces operatorfatigue and the ‘cold sink’


long nose air impact wrench

5204PRO3/4" Sq. Dr. COMPOSITE BODY AIRIMPACT WRENCH• Expert Quality • Lower noise, low vibration, high

torque, twin hammer action with easy forward andreverse one-hand operation • Rotating air inlet toprevent air lines tangling • The composite body makesthis a lightweight but rugged tool that reduces operatorfatigue and the ‘cold sink’

Specification:Free speed ... 5500r/minAverage air consumption ... 6cfm (170L/min)Weight ... 3.4kg

5218PRO

3/8" Sq. Dr. STUBBY COMPOSITEBODY REVERSIBLE AIR RATCHET• Expert Quality • Lower noise, low vibration, low

weight with wobble anvil and silenced motor outlet formaximum user comfort • Composite body makes this alightweight but rugged tool that reduces operatorfatigue and the ‘cold sink’ effect

Specification:Free speed ... 350r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 400g

Specification:Free speed ... 5500r/minAverage air consumption ... 7cfm (178L/min)Weight ... 4.3kg

5219PRO

1/4" Sq. Dr. STUBBY COMPOSITE BODYREVERSIBLE AIR RATCHET• Expert Quality • Lower noise, low vibration, low weight

with silenced motor outlet for maximum user comfort• Composite body makes this a lightweight but rugged tool

that reduces operator fatigue and the ‘cold sink’ effect




Stock No.47568


*TSP € 70.72 *TSP € 86.99

5295PRO1/2" Sq. Dr. SOFT GRIPREVERSIBLE AIR RATCHET• Expert Quality • Lower noise, low vibration, soft grip ratchet

designed for the professional user• Rear rotating exhaust for user comfort• Hardened ratchet housing for long life


Stock No.41099


*TSP € 70.72 *TSP € 86.99

5275K/PROCOMPACT COMPOSITE BODYREVERSIBLE AIR DRILL WITH 6mmKEYLESS CHUCK• Expert Quality • Lower noise, low vibration and

Lightweight and powerful with a reversing facility,planetary gear system, variable speed trigger andJacobs keyless chuck • Composite body makes this alightweight but rugged tool that reduces operatorfatigue and the ‘cold sink’ effect


Stock No.14265


*TSP € 101.70 *TSP € 125.09

5277K/PROCOMPOSITE BODY SOFT GRIPREVERSIBLE AIR DRILL WITH 13mmKEYLESS CHUCK• Expert Quality • Lower noise, low vibration, soft

grip workshop air drill • Lightweight and powerfulwith a reversing facility, planetary gear system,variable speed trigger, side handle and Jacobskeyless chuck • Rotating air inlet to prevent air linestangling • Composite body makes this a lightweightbut rugged tool that reduces

operator fatigue and the‘cold sink’ effect

Specification:Spindle thread ... 3/8" x 24 tpiFree speed ... 800r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.3kg

Stock No.14266


*TSP € 107.95 *TSP € 132.78

5276K/PRO

COMPOSITE BODY SOFT GRIPREVERSIBLE AIR DRILL WITH 10mmKEYLESS CHUCK• Expert Quality • Lower noise, low vibration, soft

grip workshop air drill • Lightweight and powerfulwith a reversing facility, planetary gear system,variable speed trigger and Jacobs keyless chuck

• Rotating air inlet to prevent air lines tangling• Composite body makes this a lightweight but rugged

tool that reduces operator fatigueand the ‘cold sink’ effect

Specification:Spindle thread ... 3/8" x 24 tpiFree speed ... 1800r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.1kg

Stock No.14258

EX. VAT INC VAT


*TSP € 81.29 *TSP € 99.99

Stock No.14193


*TSP € 113.95 *TSP € 140.16

5224PRO3/8" Sq. Dr. SOFT GRIPREVERSIBLE AIR RATCHET• Expert Quality • Lower noise, low vibration soft grip ratchet

designed for the professional user• Rotating air inlet to prevent air lines tangling• Rubber boot around ratchet head to minimise in

use damage


5240PROCOMPOSITE BODY SOFT GRIP AIRSCREWDRIVER• Expert Quality • Lower noise, low vibration

workshop air screwdriver • Lightweight and powerfulwith a reversing facility, planetary gear system andquick change chuck • Silenced motor outlet formaximum user comfort • Composite body makes thisa lightweight but rugged tool that reduces operatorfatigue and the ‘cold sink’ effect

Specification:Hex. drive ... 1/4"Free speed ... 1800r/minTorque ... 10-90lb-in (1.13-10.17Nm)Average air consumption ... 4cfm (114L/min)Weight ... 1.3kg



5241PRO

COMPOSITE BODY IN-LINE AIRSCREWDRIVER• Expert Quality

• Lower noise, low vibration workshop air screwdriver• Lightweight and powerful with a reversing facility,

planetary gear system , quick change chuck andsuspension loop

• Externally adjustable cushion clutch for precisetightening torque.

• Silenced motor outlet for maximum usercomfort

• Composite body makes this a lightweightbut rugged tool that reduces operatorfatigue and the ‘coldsink’ effect

Specification:Hexagon drive ... 1/4"Free speed ... 1800r/minTorque ... 10-90lb-in (1.13-10.17Nm)Average air consumption ... 4cfm (114L/min)Weight ... 1.2kg

Stock No.14197


*TSP € 138.90 *TSP € 170.85

Stock No.14263


*TSP € 258.00 *TSP € 317.34

Stock No.14261


*TSP € 282.00 *TSP € 346.86

5233PRO

150mm COMPOSITE BODY VERTICALPOLISHER• Expert Quality , lower noise, low vibration • Silenced

motor outlet for maximum user comfort • Adjustableexhaust to direct air away from user and workpiece

• Composite body makes this a lightweight but ruggedtool that reduces operator fatigue and the‘cold sink’ effect

Specification:Spindle size ... 5/16" x 24Average air consumption ... 4cfm (114L/min)Weight ... 1.1kg

Stock No.14198


*TSP € 149.95 *TSP € 184.44

Stock No.47622


*TSP € 178.80 *TSP € 219.92

5231PRO

150mm COMPOSITE BODY DUALACTION SOFT GRIP SANDER• Expert Quality • Lower noise, low vibration, low

weight with soft grip handle • One or two handedoperation due to double action control lever • Suitablefor use with centralized dust extraction vacuum system• Ideal for working on body filler and contouredsurfaces • The composite body makes this a lightweightbut rugged tool that reduces operator fatigue and the‘cold sink’

Specification:Spindle size ... 5/16" x 24Orbit diameter ... 5mmOrbits per minute ... 10,000Average air consumption ... 3.0cfm (85L/min)Weight ... 1kg

5248PRO

6-13mm SOFT GRIP AIR BELTSANDER KIT• Expert Quality ,• Contents: sander, four interchangeable contact arms

and a selection of polycarbide and abrasive sandingbelts

• Adjustable belt tracking, safety lever and rotating airinlet to prevent air lines tangling

Specification:Belt sizes ... 6 and 13 x 300mmAverage air consumption ... 4.0cfm (114L/min)Free speed ... 22,000r/minWeight ... 1kg

5249PRO

6-25mm SOFT GRIP AIR BELTSANDER KIT• Expert Quality ,• Contents: sander, five interchangeable contact arms and

a selection of polycarbide and abrasive sanding belts• Adjustable belt tracking, safety lever and rotating air

inlet to prevent air lines tangling• Adjustable exhaust to direct air away from user and

workpiece

Specification:Belt sizes ... 6, 10, 13 and 20 x 460mmAverage air consumption ... 4.0cfm (114L/min)Free speed ... 18,000r/minWeight ... 1.3kg

Draper Expert Quality air tool range...These quality air tools are designed for use in the professional workshop.For the full range of Draper Air Tools and to find a stockist, please visit our website: www.draper.co.uk



Stock No.47616


*TSP € 105.00 *TSP € 129.15

Stock No.47623


*TSP € 371.70 *TSP € 457.19

Stock No.47570


*TSP € 104.50 *TSP € 128.54

Stock No.47569


*TSP € 79.25 *TSP € 97.48

Stock No.47572


*TSP € 167.70 *TSP € 206.27

Stock No.47617


*TSP € 105.00 *TSP € 129.15

5229PRO50/75mm COMPACT DUAL ACTIONSOFT GRIP AIR SANDER KIT• Expert Quality • Contents: sander; 50mm backing pad; 75mm backing

pad; 30 x 50mm/30 x 75mm assorted grit hook andloop sanding discs

• Lower noise. low vibration, low weight compact sanderideal for small scale surface repairs and intricate items

• Orbit 5mm diameter

Specification:Pad sizes ... 50 and 75mmOrbits per minute ... 10,000Orbit diameter ... 5mmAverage air consumption ... 4.0cfm (113L/min)Weight ... 0.6kg

5230PRO

75mm COMPACT SOFT GRIP AIRPOLISHER KIT• Expert Quality • Contents: pads and polishing bonnets• For small scale surface polishing

Specification:Speed (no load) ... 2500r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 0.6kg

5232PRO KIT

SOFT GRIP AIR SURFACEPREPARATION/CONDITIONING KIT• Expert Quality • For the preparation of surfaces prior

to remedial work • Two rubber wheels for the removalof graphics and decals, four rotary wire and polycarbidewheels for the removal of rust, tar, caulks, underbodycoatings etc. • Low noise/low vibration/low weight withsoft grip rubber sidehandle and body

• Wheel guard toprotect users againstdebris whilst using

Specification:Speed (no load) ... 3500r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1kg

5225PRO50mm COMPACT AIR ANGLEGRINDER KIT• Expert Quality • Lower noise, low vibration, low

weight with variable speed motor and steel throttlelever with sprung safety lock-of • Supplied with fourgrinding wheels

Specification:Spindle thread ... 3/8 x UNFSpeed (no load) ... 20,000r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 750g

5226PRO75mm SOFT GRIP REVERSIBLE AIRCUT-OFF TOOL• Expert Quality • Patented reversible mechanism to

protect workpiece from sparks • Variable speed motor;rotating air inlet to prevent air line tangle and steelthrottle lever with sprung safety lock-off • Particularlysuitable for use in confined working spaces onautobody repair work

Specification:Disc size ... 75 x 1.6mmFree speed ... 18,000r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 900g

5228PRO115mm COMPOSITE BODY AIRANGLE GRINDER• Expert Quality • Lower noise and low vibration• Spindle lock for easy disc change • Composite body

makes this a lightweight but rugged tool that reducesoperator fatigue and the ‘cold sink’ effect • Suppliedwith side handle

Specification:Spindle thread ... M14Speed (no load) ... 12,000r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 2kg



Stock No.47565


*TSP € 44.96 *TSP € 55.30

Stock No.47564


*TSP € 70.79 *TSP € 87.07

Stock No.47566


*TSP € 59.99 *TSP € 73.79

4201HDA

1/2" Sq. Dr. HEAVY DUTY AIRIMPACT WRENCH• Quality heavy duty wrench with powerful torque from

the efficient motor • Ruggedly built for reliable use •One hand easy forward and reverse direction change• Variable position power regulator for simple speedand power control

Specification:Clutch type ... roller pinBolt capacity ... 16mmUltimate torque ... 280lb-ft (380Nm)Average air consumption ... 4.0cfm (114L/min)Weight ... 2.4kg

Stock No.55111


*TSP € 83.70 *TSP € 102.95

Stock No.55112


*TSP € 136.80 *TSP € 168.26

4201HDKA15 PIECE 1/2" Sq. Dr. HEAVY DUTY AIRIMPACT WRENCH KIT• Contents: impact wrench, 10 x impact sockets, extension bar and

accessories • Quality heavy duty wrench with powerful torquefrom the efficient motor • Ruggedly built for reliable use • Onehand easy forward and reverse direction change • Variableposition power regulator for simple speed and power control

Specification - impact wrench:Clutch type ... roller pinBolt capacity ... 16mmUltimate torque ... 280lb-ft (380Nm)Average air consumption ... 4.0cfm (114L/min)Weight ... 2.4kg (machine only)



*TSP € 112.75 *TSP € 138.68

5227PRO

100mm SOFT GRIP LONG NOSE AIR CUT-OFF TOOL• Expert Quality • Long body specially designed for better access for cutting exhaust pipes and other auto body panels or

light sheet metal • Incorporates a safety lever throttle switch • Variable speed motor • Rotating air inlet to prevent air linetangle • Steel throttle lever with sprung safety lock-off

Specification:Disc size ... 100 x 2mmFree speed ... 16,000r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.8kg

Stock No.47571


*TSP € 129.30 *TSP € 159.04

Draper air tool rangeGreat quality air tools, easily capable of withstanding the rigours of workshop use.

4229A

3/4" Sq. Dr. AIR IMPACT WRENCH• Powerful heavy duty impact wrench with one hand

easy forward and reversedirection change •Ideal for heavy dutyindustrial andcommercialwork

Specification:Clutch type ... rocking dogBolt capacity ... 25mmUltimate torque ... 500lb-ft (678Nm)Average air consumption ... 7cfm (200L/min)Weight ... 4.6kg

5221PRO

6mm COMPACT SOFT GRIP AIRANGLE DIE GRINDER• Expert Quality • Lower noise, low vibration, low

weight • Ideal for grinding and polishing metalcomponents such as cylinder heads, valve ports andsmall industrial components • Variablespeed motor • Rotating air inlet toprevent air line tangle

Specification:Free speed ... 25,000r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 540g

5220PRO6mm COMPACT SOFT GRIP AIRANGLE DIE GRINDER WITH 115°HEAD• Expert Quality • Lower noise, low vibration, low

weight • Ideal for grinding and polishing metalcomponents such as cylinder heads, valve ports andsmall industrial components • Variable speed motor

• 115° head for access to awkward locations• Rotating air inlet to prevent air line tangle


5222PRO6mm SOFT GRIP DIE GRINDER• Expert Quality • Low noise, low vibration • Ideal for

grinding and polishing metal components such as

cylinder heads, valve ports and small industrialcomponents • Variable speed motor

• Rotating air inlet to prevent air line tangle




Stock No.58013


*TSP € 94.75 *TSP € 116.54

4204BK

15 PIECE 3/8" Sq. Dr. REVERSIBLEAIR RATCHET KIT• Contents: reversible ratchet, 7 x impact sockets,

extension bar and accessories• Suitable for radiator, fuel pump and spark plug removal

Specification - reversible ratchetUltimate torque ... 50lb-ft (68Nm)Free speed ... 150r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.1kg (machine only)

Stock No.52604


*TSP € 52.50 *TSP € 64.58

4295BK

16 PIECE 1/2" Sq. Dr. REVERSIBLEAIR RATCHET KIT• Contents: reversible ratchet, 7 x impact sockets,

extension bar and accessories• Suitable for radiator, fuel pump and spark plug removal

Specification - reversible ratchet:Ultimate torque ... 50lb-ft (68Nm)Free speed ... 150r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.1kg (machine only)

Stock No.52602


*TSP € 53.98 *TSP € 66.40

Stock No.57676


*TSP € 37.99 *TSP € 46.73

4416PRO

150mm PROFESSIONAL DUAL ACTIONDUST-FREE AIR SANDER• Self generating dust

extracting, dust-freedual action sander

• Ideal for finishing bodyfiller and working oncontoured surfaces

• Single speed controllever and variablespeed control

• Supplied withhose and dustbag


Stock No.61324


*TSP € 119.95 *TSP € 147.54

Stock No.22321


*TSP € 107.95 *TSP € 132.78

4257

175mm AIR ANGLE SANDER• Ideal for removing rust and filler • Built in speed

regulator to ensure a constant control • Incorporatesan auto release lever throttle, with left orright fitting handle

Specification:Free speed ... 4500r/minSpindle ... 5/8" x 11 tpiAverage air consumption ... 4.2cfm (119L/min)Weight ... 2kg

4202AK

AIR HAMMER KIT• Contents: air hammer, 5 x chisels and accessories• Short stroke hammer kit comprising a full range of

accessories including panel cutter, rivet cutter, bushsplitter, spot weld splitter and piercing cutter

Specification - air hammer:Chisel shank opening ... 10 .18mmBlows per minute ... 3000Stroke length ... 66.6mmAverage air consumption ... 4.0cfm (114L/min)Weight (hammer only) ... 2kg

4237A175mm AIR ANGLE POLISHER• Ideal for heavy buffing and polishing • Complete with

built-in regulator to ensure a constant speedunder heavy loads

Specification:Spindle size ... 5/8" UNFFree speed ... 2500r/minAverage air consumption ... 12cfm (342L/min)Weight ... 2kg

42301" Sq. Dr. AIR IMPACT WRENCH• Powerful heavy duty impact wrench with one hand

easy forward and reverse direction change • Ideal forheavy duty industrial and commercial work

Specification:Clutch type ... rocking dogBolt capacity ... 38mmUltimate torque ... 1 100lb-ft (1492Nm)Average air consumption ... 12.0cfm (340L/min)

Weight ... 12.6kg

Stock No.21661


*TSP € 318.00 *TSP € 391.14 Stock No.27026


*TSP € 49.00 *TSP € 60.27

4273

REVERSIBLE AIR DRILL WITH 10mmGEARED CHUCK• For general drilling work in the workshop and

automotive trade • Lightweightand powerful with areversing facility

Specification:Spindle thread ... 3/8" x 24 tpiFree speed ... 1800r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1kg

1" square drive air impact wrench



Stock No.27639


*TSP € 66.00 *TSP € 81.18

Stock No.59953


*TSP € 76.75 *TSP € 94.40

4296K

AIR RIVETER KIT• Contents: riveting gun, 4 nozzles, spare jaw set and accessories• Designed for ease of use and durability this kit satisfies light production needs• Its quiet operation and speed of use adds value with a cost effective performance• Supplied complete in carrying case• Suitable for aluminium alloy rivets only

Specification:Capacity ... 2.4, 3.2, 4.0 and 4.8mmTraction power ... 998kgAverage air consumption ... 4.2cfm (119L/min)Weight (riveter on ly) ... 1.6kg

Stock No.33746


*TSP € 101.99 *TSP € 125.45

GSG5-COMP-100100ml GRAVITYFEED HVLPCOMPOSITE BODYAIR SPRAY GUN• General purpose • For

use with all paint typesincluding water-based •Variable fan andadjustable flow

Specification:Operating air pressure ... 30psi (2bar)Air consumption ...8cfm (226L/min)

Nozzle ... 1mmWeight ... 180g

Stock No.09709


*TSP € 26.35 *TSP € 32.41

GSG5-COMP-600

600ml GRAVITYFEED HVLPCOMPOSITE BODYAIR SPRAY GUN• General purpose• Suitable for use with

all paint typesincluding water-based • Variablefan and adjustableflow

Specification:Operating air pressure ... 43psi (3bar)Air consumption ... 14.5cfm (400L/min)Nozzle ... 1.4mmWeight ... 375g



*TSP € 40.50 *TSP € 49.82

GSG5-100100ml GRAVITYFEED HVLP AIRSPRAY GUN• General purpose • For

use with all painttypes including water-based • Variable fanand adjustable flow

Specification:Operating air pressure ... 30psi (2bar)Air consumption ...8cfm (226L/min)

Nozzle ... 1mmWeight ... 276g

Stock No.09708


*TSP € 35.40 *TSP € 43.54

GSG5-600600ml GRAVITYFEED HVLP AIRSPRAY GUN• General purpose • For

use with all paint typesincluding water-based

• Variable fan andadjustable flow

Specification:Operating air pressure ... 43psi (3bar)Air consumption ...14.5cfm (400L/min)Nozzle ... 1.4mmWeight ... 550g



*TSP € 46.75 *TSP € 57.50

4276

AIR NIBBLER• Quality diecast construction • Punch head has

four wayentry forforward,right, leftandreverseoperation

Specification:Cutting capacity ... 18 gauge in steelStrokes per minute ... 2100Average air consumption ... 4.0cfm (114L/min)Weight ... 1kg

4275BSOFT GRIP AIR BODY SAW• For the body shop and general metal fabrication plants• Cuts through double skins, door sills and chassis with

ease • Supplied with universal swivel joint connector,three saw blades and two hexagon wrenches

Specification:Overall length ... 240mmCutting capacity ... 12 gauge mild steel

... 11 gauge aluminium

... 1.2mm steelStroke length ... 10mmStrokes per minute ... 10,000Average air consumption ... 8.0cfm (230L/min)Weight ... 1kg

quality spray gunsIdeal for automotive use, these spray guns do not compromise on anything...





*TSP € 57.00 *TSP € 70.11

LONG REACH AIR BLOW GUNS• Nylon body with trigger• Suitable for cleaning liquid, swarf or dust during manufacture or assembly• Supplied with safety nozzle


35478 100mm €9.50 €11.69 €8.40 €10.3359326 250mm €9.50 €11.69 €8.40 €10.3359327 325mm €11.28 €13.87 €10.15 €12.4859328 500mm €12.22 €15.03 €10.75 €13.22



*TSP € 20.40 *TSP € 25.09



*TSP € 26.40 *TSP € 32.47

Stock No.30586


*TSP € 69.60 *TSP € 85.61

4288BPISTOL-GRIP AIR INFLATORWITH GAUGE• Suitable for use with motor vehicles, cycles,

dinghies, etc. • Clip-on connector • Gauge reads0-12bar and 0-170psi (for guidance only)

Stock No.10604


*TSP € 11.95 *TSP € 14.70

Inflators

ALG33HI-FLO AIR LINE INFLATOR WITHTWIN OPEN ENDED CONNECTOR• Industrial quality manufactured and certified to

Directive 86/217/EEC• Pressure range: 0-9.6 bar/0-138psi• Hose length: 0.5M (approx.)• Suitable for use on garage forecourts and tyre

fitting bays• A calibration certificate is supplied witheach gauge

4244A

AIR UNDERBODY COATING GUN• Fits 1 litre “Schultz" type canisters

Specification:Canister cap thread ... M42 x 3PTube length ... 250mmAverage air consumption ... 8cfm (227L/min)Weight ... 0.6kg

4212PRO

1L AIR SPRAY GUN• Professional

quality• Suction feed

complete withpot

• Can be used oncellulose,metallic,synthetics andother similarviscosity pain

Specification:Suction feed complete with potOperating air pressure ... 50-60psi (3.5-4.1bar)Air consumption ... 7.0-8.5cfm (199-241L/min)Nozzle ... 1.8mmFluid inlet ... 3/8" BSPWeight ... 1kg

4297400c AIR GREASE GUN• Pistol-type, single shot gun suitable for agricultural,

automotive and industrial applications • Three methodsof grease loading available: standard 400g cartridges,filler pump and bulk • Supplied with rigid and flexibledelivery tubes

Specification:Operating air pressure ... 30-110psi (2.1-7.6bar)Outlet pressure ... 1200-4500psi (83-414bar)Weight ... 1.5kg

A choice of two inflators for usearound the workshop...

Underbodycoating gun



11.5M HEAVY DUTY NYLON RECOIL AIR HOSES• Hoses to BS5409 Specification• Recoil type which allows good access to working areas• Supplied with spring protection guards and 360° swivel end fittings


76981 1/4" BSP male €42.84 €52.69 €24.75 €30.4476982 3/8" BSP male €56.52 €69.52 €33.00 €40.59

WHIP HOSES• Manufactured to BS5118 specifications• 600mm (approx.) long• PCL adaptor and male tailpiece


No. Thread Hose I/DxO/D ex. VAT Inc. VAT ex. VAT Inc. VAT54438 1/4" BSP (M) 7 x 14mm €12.60 €15.50 €8.35 €10.2754439 3/8" BSP (M) 10 x 17mm €15.36 €18.89 €9.50 €11.6954440 1/2" BSP (M) 13 x 21mm €22.78 €28.01 €13.15 €16.17

STRAIGHT LINE AIR HOSES

• Generally in accordance with BS EN ISO 2398 Specification

• PVC air line hoses for the workshop and industrial user, supplied complete with zinc plated fittings

Stock Part Internal Length Max. Working Diameter List Price List Price TSP* TSP*No. No. Diameter (Working) Connection Pressure internal x external ex.VAT Inc.VAT ex.VAT Inc.VAT

14272 4305 6mm 5M 1⁄4" BSP Male 1.6MPa (232psi) 6 x 14mm €14.50 €17.83 €9.90 €12.1814273 4310 6mm 10M 1⁄4" BSP Male 1.6MPa (232psi) 6 x 14mm €22.92 €28.19 €15.50 €19.0736939 4306 6mm 15M 1⁄4" BSP Male 1.6MPa (232psi) 6 x 14mm €38.09 €46.85 €24.75 €30.4414274 4320 6mm 20M 1⁄4" BSP Male 1.6MPa (232psi) 6 x 14mm €39.94 €49.12 €29.70 €36.5314275 4305 8mm 5M 1⁄4" BSP Male 1.6MPa (232psi) 8 x 16mm €15.55 €19.13 €10.79 €13.2736940 4307 8mm 15M 1⁄4" BSP Male 1.6MPa (232psi) 8 x 16mm €44.64 €54.91 €26.90 €33.0914276 4305 10mm 5M 1⁄4" BSP Male 1.6MPa (232psi) 10 x 18mm €18.89 €23.23 €12.35 €15.1914277 4310 10mm 10M 1⁄4" BSP Male 1.6MPa (232psi) 10 x 18mm €30.02 €36.93 €20.65 €25.4036941 4308 10mm 15M 1⁄4" BSP Male 1.6MPa (232psi) 10 x 18mm €50.98 €62.70 €30.30 €37.2714278 4320 10mm 20M 1⁄4" BSP Male 1.6MPa (232psi) 10 x 18mm €52.18 €64.18 €37.15 €45.69

14279 4305 13mm 5M 1⁄2" BSP Male 1.6MPa (232psi) 13 x 21mm €27.65 €34.01 €19.50 €23.9936942 4309 13mm 15M 1⁄2" BSP Male 1.0MPa (145psi) 13 x 21mm €62.18 €76.49 €32.20 €39.61

straight line

air hoses

professional whip hoses

Air line hosesHigh specification recoil hoses, whip hoses and straight line hoses to ensureyou get the very best from your air tools.

For correct maintenance of air tools our combined filter/regulator/lubricatoris ideal - see overleaf on page 118 or visit the website: www.draper.co.uk

Stock No.87907


*TSP € 159.95 *TSP € 196.74

4254C

8M RETRACTABLE AIR LINE HOSEREEL• To BS EN ISO 2398 Specifications• Keeps work space free from unwanted lengths of hose• Integral ceiling/wall bracket• Supplied with 9M of air line hose size 8 x 12mm• Hose connection 1/4" BSP male thread• Maximum pressure 1MPa (10bar/145psi)



Stock No.22317


*TSP € 11.10 *TSP € 13.65

ACK2

3 PIECE 1/4" BSP AIR LINE COUPLINGSET• Contents: screw adaptor male thread 1/4" BSP taper,

coupling adaptor female thread 1/4" BSP parallel andscrew adaptor female thread 1/4" BSP taper

Stock No.37844


*TSP € 8.65 *TSP € 10.64

A6103PCL TWIN STANDARD COUPLING• Supplied with with two male ‘airflow ‘ couplings and

one ‘Vertex’ tailpiece

Stock No.25855


*TSP € 30.30 *TSP € 37.27

ALFR12

PCL 1/2" BSPCOMBINED FILTER/ REGULATOR UNIT• Expert Quality •

Designed to eliminatemoisture and particulatesfrom the air flow •Manual/semi-automaticdrain with 10 micron filter •Integral locking device •Maximum inlet pressure14bar/200psi • Dualmarked gauge, bar and psi



*TSP € 58.75 *TSP € 72.26

AIR TOOL OIL• Gives outstanding performance at high and low temperatures• Contains extreme pressure (EP) additives for ‘shock absorption’• For use with all pneumatic tools and equipment

Specification:Viscosity at 40° ... 10.0 (ASTM D 445)Specific gravity ... 0.85 (ASTM D 445)Flash point ... >140°C (IP34)


No. Volume ex. VAT Inc. VAT ex. VAT Inc. VAT34679 250ml €6.19 €7.62 €4.15 €5.1034681 500ml €8.23 €10.13 €5.30 €6.5234682 1L €13.99 €17.21 €9.00 €11.07

Q:Why use regulators for compressed air? A: Different air tools require different air

pressures. For example Health & Safetylegislation stipulates that air blow guns MUSTwork at,or below, 30psi - whereas a large airnailer needs a minimum of 60psi and whendriving larger nails up to 100psi - to preventdamage to the nail driver blade. Make sure youadjust the pressure to suit the tool, every time.

Q:Why use lubricators for compressed air?

A: Except for spraying equipment, almost all otherair tools require lubrication. Air tools areprecision manufactured to close tolerances toget the best power and lightest weight.Youwould not run your car without oil - don't do it toyour air tools! Lubricators can greatly extendthe life of your air tools.

Q:Why use f ilters for compressed air? A: When air is compressed, the water vapour in

that air is also compressed.This water vapourthen reforms as water and can contaminatecompressor tanks, air lines and very quicklyrust the inside of your air tools.

Q:Where should the filter/regulator/lubricator bein the air line?

A: In simple terms,as close to the air tool aspossible when the tool is in use. This ensuresany "downstream" contaminates are removed,

that the lubricating oil is correctly dispersed,and that you are operating at the correctpressure.

Stock No.43402


*TSP € 97.50 *TSP € 119.93

ALFRL12

PCL 1/2" BSPCOMBINEDFILTER/ REGULATOR/ LUBRICATORUNIT (FRL)• Expert Quality •

Designed to eliminatemoisture andcontaminates from theair flow and to lubricate tools prior to use •Manual/semI-automatic drain with 10 micron filter •Integral locking device • Maximum inlet pressure14bar/200psi. • Dual marked gauge, bar and psi

Information...

4255

MINI OILER• To keep air tools lubricated • 1/4" BSP thread• Can be used with most Draper Air tools or other

manufacturers similar products

Air tool accessories A small selection of sundry items designed to help add life andperformance to your air tools.

All Draper tools are fully guaranteed to be fit for purpose; for moreinformation on Draper Tools, company history, it’s products and to find afull listing of stockists, please visit the website...

www.draper.co.uk



quick reference indexA

Aerosols ................................................................63

Air Tools........................................................108-118

Axle Stands ............................................................45

B

Battery Booster Cables..........................................25

Battery Chargers ..............................................23-24

Beam Clamps ........................................................50

Bench Press (Hydraulic)........................................48

Bit Sets ....................................4, 11, 12, 13, 15, 21

Body Repair Kits ....................................................49

Bottle Jacks............................................................45

Brake Repair Tools ..........................................26-27

Breakdown Tools ..................................................25

Brushes/Brooms ......................................65, 71, 92

C

Chargers (Battery)............................................23-24

Coil Spring Compressors ................................60-61

Compression Testers ............................................31

Compressors (Air) ......................................104-107

Consumables/Assortments ............................63-64

Cooling Tools ........................................................38

Crimping Tools ......................................................66

DDiagnostic Tools ..............................................29-30

Diesel Service Tools ........................................31, 33

Draper TX-STAR products ..............................12-13

Drills (all types) ..........85, 94, 95, 96, 98, 110, 114

E

EOBD2 Fault Code Reader ....................................30

Electrical Testers ....................................................30

Emergency Tools ..................................................25

Engine Cranes........................................................47

Engine/Gearbox Support ......................................46Engineers Tools................................................83-86

F

FPM Pump Sprayers ............................................28

Feeler Gauges ........................................................36

Fire Extinguishers & Stands..................................90

First Aid Kits ..........................................................90

Flexi Inspection Cameras ......................................32

Floor Press (Hydraulic)..........................................48

Fuel Cans................................................................56

GGrease Guns/Pumps ..............................58, 59, 116

Gloves ..............................................................88, 89

H

Hacksaws ..............................................................85

Hammers (all types)..............................................70

Hexagon Keys ........................................................68

Hoists (all types) ..............................................50-51

Hose Clamp Tools..................................................27

Hose Reel ..............................................................98

IImpact Sockets ................................................14-15

Inspection Lamps ............................................56-57

JJacks (all types) ..............................................42-46

KKnipex Pliers ....................................................68-69

L

Ladders & Platforms ............................................73

Lamps & Lighting ..........................................56-57

Load Leveller..........................................................46

Load Slings ............................................................49

M

Mechanics Creepers..............................................51

Micrometers ..........................................................83Motorcycle Lifts................................................40-41

Motorcycle Tools..............................................38-41

OOil Filter Crusher ....................................................53

Oil Filter Wrenches / Drainage ........................52-55

Oil Funnels..............................................................54

Oil Spill Pallets ......................................................91

Oil Spill Kit..............................................................91

PPPE Products (Safety) ....................................86-89

Padlocks ................................................................93

Pallet Truck ............................................................82

Parts Washers........................................................52

Pick Up Tools ........................................................38

Piston Ring Compressors ....................................34

Pliers (all types) ......................3, 29, 65, 66, 65, 69

Power Packs ..........................................................25

Power Tools....................................................94-118

Pressure Washers..................................................97

Protective Clothing ..........................................86-89Pry Bars..................................................................37

Pullers and Separators ....................................59-61

R

Riveters..........................................................67, 115

Roller Cabinets ................................................74-80

SSack Truck..............................................................82

Safety Footwear ....................................................87

Scrapers ................................................................37

Screwdrivers (all types)........................67, 110, 111

Separators and Pullers ....................................59-61

Service Tools ....................................................26-29

Socket Sets........................................4-8, 14, 15, 55

Socket Accessories (incl Ratchets, Wobble Bars etc)9, 11, 14

Sockets ................................3, 8, 10, 12, 16, 17, 18

Soldering/Gas Torches ..........................................72

Spanners (all types) ........................................18-21

Specialist Sockets (Hub Nut) ..........................16-18

Stud Extractor ........................................................13

Suction Lifters ..................................................25-26

TTap and Dies ..........................................................84

Tape Measures/Rules ............................................71

Thread Repair (Recovery) Tools ..........................36

Tie Down Straps ....................................................65

Tool Kits ......................................................7, 82, 83

Tool Chests & Storage Solutions....................74-82

Torches ..................................................................57

Torque Wrenches ............................................22-23

Tow Ropes ............................................................25

Transmission Jacks ..............................................46

Transmission Stand ..............................................46

Trolley Jacks ....................................................42-44

Tyre Maintenance Tools ..................................62-63

V

Valve Grinding Tools..............................................34

Valve Spring Compressors ..................................35VDE Tools (for electric /hybrid vehicles) ............3-4

Vice ........................................................................85

W

Welding/Cutting Machines ............................99-101

Welding Accessories ..................................101-103

Wheel Chocks ........................................................44

Windscreen Tools ..................................................26

Workbench ............................................................80

Workstation............................................................80

Wrenches (all types)....21, 22, 23, 26, 33, 52, 53, 94, 108,109, 113, 114



'official tool supplier of choice',

to Santa Pod Raceway We are the 'official tool suppliers of choice' at Santa Pod Raceway.Mark Smith, our workshop/service repair manager, rides hisDraper sponsored Suzuki 1640 drag bike (shown above) whichtravels from in 0-100mph in under two seconds at Santa Pod.

'official tool supplier of choice',

to Santa Pod Raceway We are the 'official tool suppliers of choice' at Santa Pod Raceway.Mark Smith, our workshop/service repair manager, rides hisDraper sponsored Suzuki 1640 drag bike (shown above) whichtravels from in 0-100mph in under two seconds at Santa Pod.

Documents

Wrkshp1 2012 EUR, Promocion Workshop Booklet 1 DRAPER 2012,