Www.concordproducts.com SYSTEM 2000

www.concordproducts.comwww.concordmicrocomputer.com

SYSTEM 2000


Warranty

• Warrants to the original user.– defect free standard, non-custom products

• 12 year 5 sentence warranty.• Limited to repair or replacement.

– F.O.B Concord Plant– Pursuant to normal usage per Concords written

instructions


System 2000 Features

• Wood Options• PVC high impact

capping

• Monolithic Panel System

• Positive metal to metal interlock connection system

• Custom height and width capability

• Beltline raceway option• Rapid installation

timeframe due to unitized connection system


Standard Panels

• Fabric• Fabric acoustic• Fabric high

performance• Fabric tackable• Full glass• Open frame• Half glass• Vinyl• Veneer

• Pass-Thru• Radius• Laminate• End filler• Doors and gates• High pressure

laminate• Power and non-power


Panel Sizing

• Based on a consistent, precise 6” module and made in six (6) inch increments.

• Interior dimensions are the sum of the work surface or surrounding panel widths.

• At right-angle intersections, panels are connected with panel adapters.– Same thickness as the panel (1 3/4”)

• Exterior dimensions of the workstations are the sum of panel widths plus panel adapters or each right-angel intersection.


Panel Connection

• Concord Products unique internal panel connection system– provides the highest level of structural integrity – resists flex over the life of the system– Positive metal to metal connection (prevents

tolerance variance)• Each panel is furnished with a panel locking bolt.

– screws to force the wedges together• Panel Connection System is delivered fully

assembled – prevents vertical panel movement

• Ensures your client a piece of mind that their investment will meet their complete satisfaction.





Raceway Panels

• Powered raceway available– 4 circuit (8 wire)

• 5 circuit & 10 wire available upon request– rated at 20 amp 125 volt, 2 pole, 3 wire– grounded both as a full system and individual panel– receptacles are rated at 15 amps

• All raceway panels are furnished with factory provided cutouts– allowing multiple receptacles per panel– 2 per side– back to back positioning– each cutout is finished with a self storing cover


Raceway Panels• Electrical components are approved by U.L. #498

safety standards.– meets NEC requirements

• Power distribution assembly is factory installed.– can be retrofitted in the field– wire management space for up to (12) 25 pair

(non-teflon) communication cables to be provided

• Flexibility in raceway specification.• Shipped from factory with power installed


Beltline

ECR


Power• Electrical distribution block

– mounted within the panel– block mounting clips

• Festoons – are used to make panel to panel power connections.

• In-Feeds– connects building power supply to base unit– right, left straight line available– NYC handed connection from building power into unit– installs in place of electrical distributor box


Finished Ends

• Panel top cap and end trim finish• Included on panel as standard• Snap-on finished ends

– fit over panel wedge connectors– no tools are required to install

• High impact PVC plastic trim– available in all trim colors– fabric wrapped, wood veneer, solid wood

• Transitional finished end– panels of different heights connect



Wall Connectors

• Wall Starter– secures first panel

against existing wall– connecting system

included• Wall Channel

– first panel has no work surface or hanging accessories

• Wall Brackets– used if full length

channel is not practical

• L Brackets– wall fasten panels

• Wall Mount Standard– steel slotted channel to

attach work surfaces or accessories

• Wall Mount Frame– fits behind the accessory

• Panel Mount Assembly– designed to secure a

panel to mid-length of another same height panel


Surfaces• Standard

– high pressure laminate finishes

• Curved– 24” inside radius

• Inside corner– maximum work

area in a 90” panel connection

• Conference “D” or “P” shaped

• Pass-thru– fits pass-thru panel

• Curved extended– fits in a radius panel

• Cluster– various angles to fit

workstation layouts



Open Shelves

• Metal bottom shelf with matching end panels– 8” to 15” high profile– available in all trim colors

• Display shelf• High shelf• Low shelf• Garment shelf• Data storage shelf


Pedestals

• All pedestals provided with locks– can be keyed alike

• Letter size pedestals are 15” wide– legal is 18” wide

• Closed tops, custom laminate fronts, and casters are available options

• Glides are on pedestals (4)• Any combination of box and file drawers are

available– Ability to match any other colors



Flipper Doors

• Door recedes inside cabinet or over the top with hydraulic options

• Steel, laminate, fabric, and veneer covered• Locks are optional



Accessories

• Lighting• Monitor Arms• Paper Management

Accessories• Sound Control• Coat hooks

• Shelf dividers • Keyboards




Value Proposition

• Quality• Competitive price point• Predictable cost model• Ease of system• Time to market• Flexibility and scalability• Comprehensive field services• Client service model


The Better WaySYSTEM 2000

Documents

Www.concordproducts.com SYSTEM 2000