XMeets & Exceeds ANSI - A156.2, Series 4000, Grade 2 StandardsUL Listed for “A” Label 3 Hour Fire DoorsMeets ADA and ANSI A117.1 accessibility codesTested to over 2 Million CyclesSteel, Zinc dichromated for Corrosion ResistanceClutching levers standard for Vandal resistance on locking functions5” Solid zinc diecast levers, 3 3/8” wrought brass rosesAnti-sag mechanism with independent lever return springs to prevent lever sagNon-Handed - Completely reversible (S-A & S-B lever styles are handed)2 3/4” backset std. with 1 1/8“ x 2 1/4” latchface, 2 3/8” backset is available with1” x 2 1/4” latchface both with self adjusting front for square or beveled edge doorsStainless Steel with 1/2“ projection, Deadlocking on keyed functions & exit latch6 Pin Solid Brass, C Keyway, 2 Silver Nickel Keys, Standard Cylinder plug faces matchlock �nish. Prepared for Small format 6 or 7 pin IC core (less core w/ tailpiece included)4 7/8” x 1 1/4” ASA standard - T strike & Full lip strikes availableANSI A115.2 - 2 1/8“ crossbore with (2) 3/8” Thru bolt holesRemovable Thru bolts allow lock to be installed without thru boltsFactory Set for 1 3/4” - 1 3/8” require shims, can be adjusted to ¡t up to 2” thickFlat (standard, shown above), Curved, Half Curved, S-A & S-BUS3 PVD*, US4, US10B, US15, US26 PVD*, US26D (PVD = Lifetime Finish)Combination screws for wood or metal doors & framesLimited Lifetime Warranty

US26D US10B

US26 PVD

US3 PVD

US4

US15

US3 Polished Brass and US26 Polished Chromeare PVD standard (lifetime �nish)

Design Hardware presentsthe X series lockset. Available invarious different styles and finishes,It provides you with the flexibility to match any decor you choose.�e X series meets or exceedscommercial standards so you can be confident that it not only looksgreat but it will last.

X Series

Technical Specifications

6 Finishes5 Lever Designs2 3/4" or 2 3/8" backsets4 Strike Options12 Keyway Options�ru Bolted or Non �ru boltedAll In Stock

211 Endeavor Drive - PO Box 680 Rogersville, MO 65742

PH 877-258-1262 FX 877-888-0150 www.designhardware.net

Note: Non stock levers are available with Lever Kits.S-A and S-B levers are handed plaease specify right or left hand.

RHUS26DF82X

How to OrderSeries Function Lever Design Finish Handing (if required)

S-B = S-BS-A = S-A

Half Curve = HCurved = C

Flat= FLever Abbreviations

Antique BrassAntique CopperBlack Nickel

US5US11US17A**Special order nishes require 12 week leadtime

Special Order Finishes**US3*US4US10BUS26*US26DUS15

*PVD Lifetime Finish Standard on US3 and US26 nishes.

Bright/Polished Brass * PVDBrushed/Satin BrassOil Rubbed BronzeBright/Polished Chrome *PVDBrushed/Satin ChromeBrushed/Satin Nickel

Stock FinishesUS10B

US3 PVD

US26 PVD

US15

US4

US26D

Deadlocking latchbolt operated by key in outisde lever or rotating insidelever. Outside lever is always locked.

F86StoreroomX-86X-86IC

Single dummy trim for one side of door. Lever rigidDouble dummy trim for both sides of the door. Levers rigid

Single Dummy /Double Dummy

X-SDX-DD

Deadlocking latchbolt operated by lever from either side except whenoutside leveris locked from outside with key. When outside lever is locked,latchbolt is operated by key in outside lever or by rotating inside lever.

F84ClassroomX-84X-84IC

Turn / Push button locking. Pushing and turning button locks outsdielever requiring use of key until button is manually unlocked. Pushingbutton locks outside lever until unlocked with key or inside lever is turnedDeadlocking latchbolt operated by inside lever at all times.

F82Entry/OfficeX-82X-82IC

Latchbolt operated by lever from either side. Outside lever is locked bypush button inside and unlocked by emergency release outside, rotatinginside lever or closing door.

F76PrivacyX-76

Latchbolt operated by lever from either side at all timesF75PassageX-75

Deadlatching latchbolt from inside only. Blank plate outside.F61ConnectingRoom/Exit Latch

X-61

Outside / Inside Series/Function

Type ANSI No. Function Description

Available Lever Styles

X Series Functions & Options

Flat Lever Curved Lever Half Curve Lever S-A Lever S-B LeverStocked in 6 Finishes Stocked in US26D

Lever Kits for other nishesStocked in US26D

Lever Kits for other nishesAvailable with Lever Kits Available with Lever Kits