Upload
janelle-truett
View
223
Download
0
Embed Size (px)
Citation preview
Loading Paper in Tray 1
Make sure the Green Guides are right up again the
Paper
Keep an eye on the Max Line. We do not want to over load the tray
with paper.
Note: You will need to confirm the paper size and type on the control panel once you close the tray.
Loading OriginalsDocument
Feeder: One or more pages go Face Up. Make sure the gray
guides are right up against the
original.
Document Glass: Originals go Face
Down on the glass in the
Upper Left hand corner.
User Interface
Start: Press start to began a copy job, send a fax, or an email.
Stop
Clear All: Clears all settings to the default settings
Energy Saver: Press this button to put the machine in sleep mode or wake it up from sleep mode.
Copy Scan
Print from USBFax
Deletes a character at a
time
Changing the Toner
The device will alert you when the toner is 15% empty. Only change the toner at 0%. Each toner is marked by color. Pull on the color tab to remove the empty toner from the machine.
Clearing Paper Jams
Push down on
the release button, and lower the Rear Door into the open position.
Locate the tabs on either side of the paper guide cover on the Fuser. Lift up on each of the tabs, and move the paper guide cover into the open position.
Remove any jammed paper from the back of the
Fuser.
Main Copy Screen
On the main copy screen you can change your paper supply, 2-Sided Copy options, lighten/darken, as well as your color settings.
Use the pad to insert the # of pages
The Green “start” button will begin your copy job
From Services Home Select the Copy Feature
Scanning to EmailSelect the Scanning button from Services Home
Use the New Recipient button to manually enter an email address.
The address book will contain any upload email addresses
Hit the green button to begin scanning
Main Faxing ScreenSelect the Fax button from Services Home
On the main fax screen screen you can change your resolution, 2-Sided fax options, and lighten/darken
Use the key pad to manually input the fax number.
Hit the green “Start” button when your ready to fax