Upload
robyn
View
76
Download
1
Tags:
Embed Size (px)
DESCRIPTION
XFTP SAT-2150 Satellite Meter. Interactive Training. SAT-2150 Satellite Meter. About the SAT-2150 Satellite Meter: The SAT-2150 simplifies satellite dish installation and allows precise alignment of the dish. - PowerPoint PPT Presentation
Citation preview
XFTP SAT-2150XFTP SAT-2150Satellite MeterSatellite Meter
Interactive Training
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
About the SAT-2150 Satellite Meter:• The SAT-2150 simplifies satellite
dish installation and allows precise alignment of the dish.
• The meter measures digital satellite signal level, bit error rate, and carrier-to-noise ratio to confirm a quality signal.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
About the SAT-2150 Satellite Meter:• The positive signal lock feature
prevents the meter from displaying a signal quality level unless the correct satellite has been targeted.
• The SAT-2150 does not require a connection to a receiver or television to align the satellite dish.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
About the SAT-2150 Satellite Meter:• The SAT-2150 is preconfigured with
a list of commonly used satellites in North America.
• The SAT-2150 displays dish elevation and azimuth settings for each stored satellite configuration.
• Up to 80 satellite configurations can be stored in the SAT-2150’s memory.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
The Following Functions can be Performed with the SAT-2150:
• The SAT-2150 calculates the elevation, azimuth, and polarity for the dish for each satellite, based on the dish’s latitude and longitude.
• The SAT-2150 checks the signal level from the selected satellite.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
The Following Functions can be Performed with the SAT-2150:
• The features in the SAT-2150 allow for dithering (fine-tuning) of the dish.
• The SAT-2150 measures the bit error rate of the satellite signal.
• The carrier-to-noise ratio of the signal is measured.
• The SAT-2150 allows setup of dishes with multiple LNBs.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
Elevation, Azimuth, and Polarity Calculations:
• Enter the latitude and longitude of the installed dish’s location into the SAT-2150.
• Note: Several websites can provide latitude and longitude values for specific street addresses.
• From the “Utility” screen, press the FIND key.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
Elevation, Azimuth, and Polarity Calculations:
• Use the UP/DOWN keys to select the desired satellite.
• Press the F4 key to display the “Orientation” screen.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
Elevation, Azimuth, and Polarity Calculations:
• In the “Orientation” screen, the values displayed will be correct for the azimuth (AZ), elevation (EL), and polarity (PO) for the selected satellite, relative to the location of the dish installation.
• Note: Record these settings. They will be used in the next step.
• Press the F4 key to display the “Signal” screen.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
Measuring the Signal Level:• Adjust the dish to the previously
recorded elevation and azimuth values so the displayed signal (S) and quality (Q) levels are at their maximum.
• The SAT-2150 will display “OK” on the screen to indicate it has locked onto the signal.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
Dithering the Satellite Dish:• Using the fine-tuning bolts on the
dish assembly, adjust the dish in the vertical plane to achieve the best possible signal level (S).
• Using the fine-tuning bolts on the dish assembly, adjust the dish in the horizontal plane to achieve the best possible signal level (S).
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
Measuring the Bit Error Rate and Carrier-to-Noise Ratio:
• After fine-tuning the dish, press the F4 key to display the “Measurement” screen, and the BER and C/N ratio.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
Setup of Multiple-LNB Dishes:• Align the dish to the first target
satellite.• Press the FIND key to select a
second satellite configuration.• Use the UP/DOWN keys to select
the second target satellite.• Press the F4 key to display the
“Signal” screen for the second satellite.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
• Note: Follow the same keystroke procedure outlined in the previous steps to switch between two satellite configurations and their respective signal levels.
• Adjust the dish as necessary to achieve an acceptable compromise between both satellite signals, while toggling between satellite configurations.
SAT-2150 Satellite MeterSAT-2150 Satellite Meter
This concludes the interactive training for the SAT-2150 Satellite Meter. For assistance in using your SAT-2150,
please contact:
XFTP by Trilithic9710 Park Davis DriveIndianapolis, IN 46235
(317) 895-3600(800) 344-2412
www.fieldtechproducts.com [email protected]
P/N: 0010284001 v08-08