Upload
bukubuku
View
223
Download
0
Embed Size (px)
Citation preview
8/8/2019 Xjr1300 Assembly Full
1/14
PAPER CRAFT
Assembly Instructions
8/8/2019 Xjr1300 Assembly Full
2/14
Note
TO BEGIN
Items of Caution
*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size as there
are many differences in dimensions depending on the
type of printer used.
Tools and materials needed
-Ruler -Scissors - Blade cutter or "Exacto-knife" - Awl or
other pointed tool (for making a folding crease) - Felt
pen - Pin set - Glue - Hand towel ( for cleaning your
fingers) - Dictionary or other heavy book ( to press thepapers flat)
HOW TO ASSEMBLE
Basic working method and markings
Fold along these lines. The printed
surface should be on the outside of
the folded shape.
Solid lines
Dotted line
Fold along these lines. The printed
surface should be on the inside of
the folded shape.
Broken lines
Cut along these lines
8/8/2019 Xjr1300 Assembly Full
3/14
A-1
Fuel TankSheet A, 1 part in total Fold each relevant part according to the assembly symbols.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
1 Assembling the Fuel Tank
8/8/2019 Xjr1300 Assembly Full
4/14
B-3B-2
B-6
B-7B-4
B-1
B-5
B-9B-10
B-25B-29
B-35 B-30
B-26
B-28B-27
B-36
B-8
Reference photo
Steering columnSheet B, 36 parts in total
Fold each relevant part according to the assembly symbols.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
2 Assembling the Steering Column
Please use the dots on each component as reference when gluing surfaces.
8/8/2019 Xjr1300 Assembly Full
5/14
C-2C-11
C-13
C-20
C
C-29
C-25
C-19
C-12
C-10
C-14
C-21
C-23C-15
FrameSheet C, 29 parts in total
Fold each relevant part according to the assembly symbols.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
3 Assembling the Frame
Please use the dots on each component as reference when gluing surfaces.
in the diagram indicates where the parts are to be glued later.
Please do not glue parts at this stage.
8/8/2019 Xjr1300 Assembly Full
6/14
EngineSheet D, 38 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
4 Assembling the Engine
D-1D-2
D-3
D-4
D
D-37
D-29
D-30
D-21
D-17D-18
D-19
D-20
D
D-23D-22
D-27
D-34D-38
D-13D-14
D-15D-16
D-33
Cut out.
8/8/2019 Xjr1300 Assembly Full
7/14
E-2
E-1
E-3
E-4
E-10
E-12E-14
E-23
E-6E-5
E-16E-8
E-7
E-9E-11 E-13
E-15
E-22
ExhaustSheet E, 23 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
5 Assembling the Exhaust
< Exhaust joint >
8/8/2019 Xjr1300 Assembly Full
8/14
Seat and Side CoverSheet F, 5 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
6 Assembling the Seat and Side Cover , Rear rm
Reference photo
F-1F-3
F-2 F-4
F-5
F ld h l t t di t th bl b l
8/8/2019 Xjr1300 Assembly Full
9/14
Reference photo
Sheet H, 10 parts in totalFold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
7 Assembling the Rear Suspensions and Rear Fender
Rear Suspensions
Sh t I 9 t i t t l
Rear Fender Fold each relevant part according to the assembly symbols.
H-3
H-5
H-7
H-1
H-9
H-8
H-6
H-10
H-2
H-4
8/8/2019 Xjr1300 Assembly Full
10/14
J-9
J-10
J-13
J-14
J-12
J-11
J-8
Front tireSheet J, 14 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
8 Assembling the Front Tire
*Glue the completed front wheel to the assembled front tire.
[Front tire]
8/8/2019 Xjr1300 Assembly Full
11/14
[Rear tire]
Rear tireSheet K, 13 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Glue
9 Assembling the Rear Tire
*Glue the completed rear wheel to the assembled rear tire.
K-12
K-11
K-13
K-10
K-8
K-9
8/8/2019 Xjr1300 Assembly Full
12/14
Steering columnglue the assembled parts in numericalorder through .
- 12 -
10 Finish
Please use the dots on each component as reference when gluing surfaces.
Assembly Instructions
Glue the central frame to the fuel tank.
Glue the seat to the fuel tank.
Glue the seat to the rear fender.
Glue the engine to the central frame.
Glue the rear arm to the engine.
Glue the exhaust pipe to the engine.
Glue the exhaust pipe to the rear arm.
Insert the right and left frames into the central frame
and glue this part to the seat.Glue the right and left rear shock absorbers to the right andleft frame and rear fender.
Glue the rear tire to the rear arm.
Glue the oil cooler to the frame.
Glue the front tire to the steering column.
Complete the assembly by gluing the steeringcolumn to the central frame.
Frame (Center)Fuel Tank Seat & Side Cover Rear Fender
Engine
Rear Tire
Rear Suspensions
Rear Arm
ExhaustFrame (Right&Left)
Front TireOil Cooler
8/8/2019 Xjr1300 Assembly Full
13/14
11 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.
- 13 -
RIGHT FRONT
E-1E-2E-3E-4E-5E-6
E-7E-8E-9E-10E-11E-12
E-13E-14E-15E-16E-17E-18
E-19E-20E-21E-22E-23
J-1J-2J-3J-4J-5
B- 1B- 2B- 3B- 4B- 5B- 6B- 7
B-8B-9B- 10B- 11B- 12B- 13B- 14
B- 15B- 16B- 17B- 18B- 19B- 20B- 21
B- 22B- 23B- 24B- 25B- 26B- 27B- 28
J-6J-7J-8J-9J- 10
J- 11J- 12J- 13J- 14
A-1
K-1K-2K-3K-4K-5
K-6K-7K-8K-9
K-10K-11K-12K-13
H-1H-2H-3H-4H-5
H -6H -7H -8H -9H-10
B- 29B- 30B- 31B- 32B- 33B- 34B- 35B- 36
F-1F-2F-3
F -4F -5
Rear Suspensions
Seat & Side Cover Fuel Tank
Front TireExhaustRear Tire
Steering
8/8/2019 Xjr1300 Assembly Full
14/14
12 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.
- 14 -
LEFT REAR
I -1I -2I -3I -4I -5
I -6I -7I -8I -9
G-1G-2G-3
G-4G-5G-6
G-7
C-17
C-1C-2C-3C-4C-5C-6C-7
C-8C-9C- 10C- 11C- 12C- 13C- 14
C-15C-16C-18C-19C-20C-21C-22
C-23C-24C-25C-26C-27C-28C-29
D-1D-2D-3D-4D-5D-6D-7
D-8D-9D-10D-11D-12D-13D-14
D-15D-16D-18D-19D-20D-21D-22
D-23D-24D-25D-26D-27D-28D-29
D-30D-31D-32D-33D-35D-36D-37D-38
Engine
Oil Cooler
Frame Rear Arm Rear Fender