XQG55-HE1014 Service Manual20121116

Hisense Customer Service Manual

Content

1 Safety Items

2 Specification

3 Control Panel

4 Washer Characteristics

5 Install Introduce

6 Structure Perspective

7 Breakdown Maintenance Index

8 Main Part Parameter

9 Timer Wire Diagram

Version 1 Customer Service

1. Safety Items

1.1 Please don’t use illegal spare parts

the spare parts of our washer have been special design and strict

test ,the function reach national and corporation criterion, and the machine

can safe、good work, in process of maintenance, if you want replace the

component part, please firstly choose the part that our company

supply ,and then change it .if you don’t ,the some wrong happened ,the

company will not be responsible for it.

1.2 Machine must be safe ground connection

(1) Before install and maintenance ,must be make sure good ground

connection in customer home, if no, it can make more serious static

phenomenon ,the customer will be scared or hurted,please make sure

warn customer and solve it himself

(2) Please don’t use transformer, universal plug、power socket and so on，

prevent damage machine and hurt customer himself and customer’s

belongings because of too large power

(3) Such as the plug and the socket do not match, the customer change the

power socket ,anybody can not change the plug of machine

1.3 using attention and maintenance safe

(1) before clearing and maintenance, must be cut off power supply

(2) after machine using or adjust done, should be close water source and

unplugged the power cord


(3) when machine using, please fellow the basic safe rules

a. please don’t touch or operate washer when your hand humid or

barefoot

b. unplugged the power cord, please do not pull it

c. the washer not insolate, also not be wet water

d. please don’t operate washer when nobody take care of the children

e. before wash, must be clear the stuff at the pocket, like as coins、paper、

pen and so on

f. when washer spin, don’t open the cover

g. please protect control panel, don’t use sharp objects to scratch,

otherwise may lead to water infiltration, and may be leakage


3. Control panel


4. Washer Characteristics

4.1Panel function button

Eco button

Shorten wash time, lower wash temperature, and reduce water consumption to reach perfect wash and clean performance, and reduce energy consumption.If the Eco Function is set, no Prewash, Rinse Hold or Super Foam Clear function can be set.

Prewash button

Suitable for heavily soiled (e.g., soil, dust). The programme is prolonged for 18 minutes.If the Prewash function is set, Eco Wash function cannot be set.

rinse button

R inse hold button

Extra

Add one rinse to prolong rinse time.The function is suitable for areas with soft water, or towash baby wear, or people whose skin is sensitive to detergent.If the function is set, Eco wash function cannot be set any more.

If you select “Rinse hold”, the laundry remains in the last rinse water without progressing to the final spin cycle, to avoid creasing and prevent colours from changing.It is recommended to select the function when washing synthetic or delicate wear.If you want to delay spin, the function will be useful.Note: When the programme runs to the step before spin, the machine will delay spinning.How to end Rinse Hold function:Press “Start/Pause” button or function button, and then the washing machine will runspinning progress automatically. When spinning finishes, the programme ends.


spin button

The programme defaults to the max. spin speed. Press buttons to select other spin speeds.If spin speed “0” selected, the last spin process will be canceled and the machine only dewaters before the end of programme.

delay

speed

Delay function allows to run the machine at the consumers convenience, for example, at night when electricity is cheaper.Select programme, temperature and options.Press “Speed +Temp.” button to select the delay time by 1 to 23 hours; delay time shall be longer than wash time; The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.If the programme starts, the digital window will display the remaining time and“Delay” alternatively; when the time counts down to the total wash time, it will only display the remaining time and the washing starts.

Cancel Delay :Before pressing “Start/Pause” button, turn programme selector to another programme position.


Programme start

Switch on and select program required and corresponding function keys, then press the Pause/Start Key to run the program

Child Lock

To strengthen the safety of children, the machine is equipped with “Child Lock” function.When the programme starts, press “Temp. + Option”button simultaneously, LED will display “SAFE ON” after buzzing, and then Child Lock is set up;When the single lock is set, all function buttons will be shielded;When the programme starts, press “Temp.+ Option” button simultaneously, LED will display “SAFE OFF” after buzzing, and then Child Lock is released;When power is shut down, child lock is released.

Reload in Process

If you want to reload clothes in the process of washing, please press “Start/Pause” button.If the door can be opened in the process, remaining time and child lock indicators in display will flashes. Until child lock indicator turns off, you can open the door to load clothes.If the child lock indicator doesn’t flash, it indicates that current temperature is over 50°C or you have passed the time for reloading in the process, namely no clothes allowed to load into the machine.

Programme End

When programme finished its running, it will display “end”. If no operation is taken in 30 seconds, the machine will turn off automatically.1. Press OFF button for 2 seconds to turn off the machine;2. Close the tap;3. Open the door and take the washed clothes out;4. Slightly open the door to remove moisture in the pump.

Change programme or optional functionafter the programme starts.

1. Press OFF button for 2 seconds to turn off the machine;2. Restart the machine and select new programme and options. If needed, select spin speed.3. Re-press “Start/Pause” button to start new programme.Don’t add detergent any more.


Door open indication

Before starting and after end of a programme, the lamp lights to show

that the door can be opened, as long as the wash programme is running, the

door remains locked and must on no account be forced open. in case you have

an urgent need to open it during the running programme,refer to “cancel

(reset)a running programme before the end”

Red indications

Water tap closed

The appliance has no or insufficient water supply, open the water

tap; If

the indication still lights up, refer to the “troubleshooting guide”

in the instructions for use.

C lean pump

Waste water is not pumped out, check whether the drain hose is

kinked or the filter must be cleaned; in the latter case refer

to the instructions

for use (“removing the filter”).

Programme end

All the lights of the programme sequence indicator are off, and the “door

open”indication lights up.

Turn the programme selector to the “off ”position.

C lose the water tap.

Open the door and unload the machine.

Leave the door open to allow the drum to dry.

.


Change programme and/or options after programme start

Press the “start/pause”button to pause the programme.the light flashes.

Select the new programme (with temperature),any options and another

spin speed if you want.

again. The new programme continues at

the same position where the previous programme was interrupted; do not add

detergent for this programme.

Cancel (reset) a running programme before the end

the“reset”button cancels a programme before the end.

Press for at least 3 seconds.

Any existing water is drained out before the door can be opened .

Press the “start/pause”button

the“reset”button


5. Install Introduce







6. Structure Perspective

6.1 Entirety

6.2 Inlet system


6.3 Tub

6.4 Drain system

6.5 Door assembly

WW10510514

461970419661

W10282691

46197043590

46197042380

46197042379

46197042387


9. Circuit Diagram

Documents

XQG55-HE1014 Service Manual20121116