Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

Summary

I needed a little angled mount for a 20x4 character LCD display for aproject I'm working on. Thought it might be useful to someone else. UsesM2.5 x 12mm screws with nuts to attach the display. To mount the standitself there are M3 holes on bottom of the stand.

I designed this for the display I have (a Newhaven NHD-0420DZ-FL-YBW)but I took a look at the data sheets for a few other brands of 20x4HD44780 type displays and the dimensions look to be the same.

[Update 2016-11-19]Added front cover plates for the top and bottom of the display. I used M2.5x 16mm screws with the cover plates.

Hobby & Makers > Electronics

lcdholder lcd hd44780 electronics 20x4lcddisplay 20x4

Category: Electronics

M McMatt

20x4 LCD DisplayStand

VIEW IN BROWSER

updated 21. 12. 2019 | published 21. 12. 2019

3D M

ODEL

ONLY

88.0 KBupdated 21. 12. 2019

17.7 KBupdated 21. 12. 2019

18.4 KBupdated 21. 12. 2019

Find source .stl files on Thingiverse.com

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

20x4_lcd_stand_flat.stl

lowercover.stl

uppercover.stl