Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Summary
The photo is of a 25% scale print. I have also done 50%, 35% and 18%.The big ones are easier to do and come out more scale looking. I added acouple photos of the real ones I used as a reference. I used my peltor radiohearing protectors for most measurements and guessed at the ones forthe mike and boom.
If you search "Gary" on thingiverse you will find the pilot.
Hobby & Makers > RC & Robotics
scalemodel rcairplaneparts radiocontrol pilot
modelairplane airplane
Category: R/C Vehicles Print Settings
Printer: Anet A8
Resolution: 0.2mm
Notes:
It is modelled full scale...just scale it to whatever size you need..same forthe pilot.
G GerryPB
Aviation headsetscale model
VIEW IN BROWSER
updated 30. 12. 2019 | published 30. 12. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
78.8 KBupdated 29. 12. 2019
507.2 KBupdated 29. 12. 2019
370.3 KBupdated 29. 12. 2019
154.9 KBupdated 29. 12. 2019
629.2 KBupdated 29. 12. 2019
611.7 KBupdated 29. 12. 2019
996.6 KBupdated 29. 12. 2019
For the electrical wires on the full scale they are about 3 to 4mm and theheadband wire 2 mm. The closer you can get them to scale the morerealistic the will look.
I know there is room for improvement so feel free to remix it.
Have fun..let me know how it goes.
wh_left_earcup_button.stl
bk_headband.stl
bk_earcup_connector.stl
bk_knob.stl
wh_right_plain_earcup.stl
mike.stl
bk_mike_and_boom.stl
790.6 KBupdated 29. 12. 2019
714.6 KBupdated 29. 12. 2019
530.4 KBupdated 29. 12. 2019
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
bk_earcup_connector_2.stl
bk_cushion.stl
bk_boom.stl