Upload
others
View
43
Download
0
Embed Size (px)
Citation preview
Adrian Martinez
Fokker Dr.1 Triplane
VIEW IN BROWSER
updated 16. 7. 2019 | published 16. 7. 2019
PRUSAPRINTERS
Summary
This is a model of the Fokker Dr.1 triplane. The red baron plane.
It comes in 3 different filament colors: RED, WHITE and BLACK. The redbody does need supports for the sticks of the wings to be holdedpropperly. The black and white parts fit into the holes just fine and goesglued in place.
The propeller is holded by 2 white pieces that screw on place (notnecessary to be glued) And then the black crosses, as well as the machineguns, are glued into the body.
Toys & Games > Vehicles
baronrojo rojo dr1 baron redbaron triplano triplane
fokker
It comes in 3 different filament colors: RED, WHITE and BLACK. The redbody does need supports for the sticks of the wings to be holded
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
8.0 MBupdated 16. 7. 2019
11.1 MBupdated 16. 7. 2019
3.2 MBupdated 16. 7. 2019
propperly. The black and white parts fit into the holes just fine and goesglued in place.
The propeller is holded by 2 white pieces that screw on place (notnecessary to be glued) And then the black crosses, as well as the machineguns, are glued into the body.
Find source .stl files on Thingiverse.com
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
01_red-part.stl
02_white-part.stl
03_black-part.stl
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition