Summary

This is an easy to print, and fully functional Alien Chestburster Halloweencustom.You just need to print the mechanism and the head, clip together, take abelt and knot a fishing line or in my case a Waxed Denteal Floss onto itsplace and you are ready to scare!

Here you can see how easy is that:https://youtu.be/iz7sXwunJf8

And in action:https://youtu.be/gxmnxGZeG2o

With double way control and old sock hiding :) (thanks to robertbl22 andcyclone for the hiding idea!)https://youtu.be/S-nTmQjXvbM

Costumes & Accessories > Cosplay & Costumes in general

nosupport movingparts halloweencostume costume

chestburster alien

Dombi3D

Moving AlienChestbursterHalloween Costume[No Support, EasyAssembly]

VIEW IN BROWSER

updated 14. 12. 2019 | published 14. 12. 2019

3D M

ODEL

ONLY

Category: Interactive Art Print Settings

Printer: Anet A6

Rafts: No

Supports: No

Resolution: 0.2 mm

Infill: 0-10%

Notes:

I printed my model from PETG, because of its higher durability. With PLAnot tested yet!

0.4mm nozzle240°C (PETG)60°C heated bed60% cooling fan30 mm/s print speed2mm Z hop when rectract. (My retraction was not the best, thats why I'vegot many strings, if your retraction tuned well, than the separation will beeven easier than in my case, as you seen on the video)

For the mechanism I've just used 3 walls and 5 top and buttom solid layersand no infill.With this setup took me around 4-4.5 hour to print it.

For the head I used 10% infill till the throat, to make some support for it,after that just 3 walls and 5 solid top layers has been used. With this setupit takes around 3-3.5 hours to finish.

If you have a rigid frame you can even try to print it faster.

Post-Printing

If you have white PETG (PLA) you can make it even scarier with some paintand a white sock with some artifical blood :)Please if you make one post it as "I Made One"!I am curious how creative you are.

How I Designed This

The base idea came form the Platform Jack, but I have redesigned thewhole thing from scratch and optimised it till I got this version. It looksreally complex from a closer view, but every little detail has a function.

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

230.5 KBupdated 14. 12. 2019

959.6 KBupdated 14. 12. 2019

5.4 MBupdated 14. 12. 2019

Find source .stl files on Thingiverse.com

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

alien_chestburster_head_low-poly.stl

alien_mechanism.stl

alien_chestburster_head_fine_mesh.stl