Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Summary
Thank you JonnieZG for sharing your "Vacuum Sucker for Drilling" (https://www.thingiverse.com/thing:2939576)! Great design since through the holeyou still have full visibility on what you are doing, while in the same timethrough that hole air is sucked in, picking up the dust and then out it goesthrough the exit pipe into your vacuum cleaner. Due to the vacuum itcreates, this 'thing' also sucks itself a bit against the wall. Overall muchbetter than some of the 'cup-types' I have seen till date.
This is not really a 'remix'. The original design is for a vacuum hoseconnection with an outer diameter of 30 mm. I just resized the originaldesign accurately in Meshmixer such that it fits perfectly on my KarcherWD 3 shop vac which has an outer diameter of 35 mm. Credits toJonnieZG.
Hobby & Makers > Tools
sucker vacuum drilling dril karcher
Unassociated tags: shop vac, vacuum adapter
P Petclaud
Vacuum Sucker forDrilling - KarcherShop Vac 35 mmOD
VIEW IN BROWSER
updated 15. 1. 2020 | published 15. 1. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
830.8 KBupdated 15. 1. 2020
Category: Machine Tools Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0.15 or 0.20
Infill: 20%
Notes:
Print in the orientation as per the STL file and with supports ON. Suggestto use 3 or 4 perimeters, to avoid very small infills in the exit pipe.
Not so much supports are needed - see Slic3r screen. It will print in some3,5 hours
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
vacuum_sucker_for_drilling_35_mm.stl
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition