YEAR GEARBOX - MK Martin · GEARBOX 11 Meteor - Skidsteer Meteor Snow Blowers for Skid Steer Loaders feature one piece side plate construction for added strength and rigidity. They

YEAR GEARBOXLIMITED WARRANTY

Two Year Limited Consumer Warranty Five Year Limited Consumer Warranty on Gearboxes 90 Day Limited Commercial Warranty including Gearboxes

For all warranty information, please contact MK Martin by phone at 1.855.664.2752 or by email at [email protected]

iii1.855.664.2752

Table of Contents

Snow Products 2

Blower & Power Pack . . . . . . . . . . . . . . . . . 3Meteor - Loader Mount . . . . . . . . . . . . . . . . 4Meteor - Single Auger . . . . . . . . . . . . . . . . . 5Meteor - Double Auger . . . . . . . . . . . . . . . . 7Meteor - Pull Type . . . . . . . . . . . . . . . . . . 8Features & Options . . . . . . . . . . . . . . . . . . 9Meteor - Skidsteer . . . . . . . . . . . . . . . . . .11Commercial SnowThrowers . . . . . . . . . . . . . .12Commercial SnowThrower Features . . . . . . . . . . .14Pull-Type SnowThrower . . . . . . . . . . . . . . . .15Commercial SnowBlowers . . . . . . . . . . . . . . .16Commercial SnowBlower Features . . . . . . . . . . . .18

Landscape/Estate Products 20

Pulsar . . . . . . . . . . . . . . . . . . . . . . .21Pulsar Plus . . . . . . . . . . . . . . . . . . . . .23Pulsar Wing . . . . . . . . . . . . . . . . . . . .25Pulsar - Skidsteer . . . . . . . . . . . . . . . . . .27Pulsar - Finishing Mower . . . . . . . . . . . . . . .28Axis Tool Arm . . . . . . . . . . . . . . . . . . . .293PH Box Scraper . . . . . . . . . . . . . . . . . . .31Scraper Blade . . . . . . . . . . . . . . . . . . . .32XD Grader Blade . . . . . . . . . . . . . . . . . . .33Land Leveler . . . . . . . . . . . . . . . . . . . .35Grader Leveler . . . . . . . . . . . . . . . . . . . .37Track Curry . . . . . . . . . . . . . . . . . . . . .38Rotary Tiller. . . . . . . . . . . . . . . . . . . . .39Landscape Rake . . . . . . . . . . . . . . . . . . .40Cultivator . . . . . . . . . . . . . . . . . . . . .41Weight Box . . . . . . . . . . . . . . . . . . . . .42Dump Box . . . . . . . . . . . . . . . . . . . . .43

1

Table of Contents

Made in Canada

Look for this decal at your local dealer for quality equipment Made in Canada

Manufacturing quality Canadian made equipment has been our business for 50 years. MK Martin Enterprise Inc was established in 1969. Our products and reputation for quality are distributed throughout North America.

E&OEErrors and omissions excepted November 2018. Specifications printed in this catalogue are current at printing and may be subject to change without notice. For current information on all of our products, please

contact MK Martin directly.

Agricultural Products 44

Gravity Box . . . . . . . . . . . . . . . . . . . . .451200 Gravity Box. . . . . . . . . . . . . . . . . . .47Grain Cart . . . . . . . . . . . . . . . . . . . . .48Forage King - Bale Handler . . . . . . . . . . . . . . .49Implement Caddy . . . . . . . . . . . . . . . . . .50Strip Cat . . . . . . . . . . . . . . . . . . . . . .51Stack N Fold Toolbar . . . . . . . . . . . . . . . . .55Disc Mower Implement Caddy . . . . . . . . . . . . .56

Snow Products

GEARBOX

www.mkmartin.ca3

Blower & Power Pack

Available with the following Quick Tach:

• Universal Skidsteer• Euro (ALO)• JD 440/540 Combination

Must be specified at time of order.

Models SBLMPP-30 SBLMPPCS-30

Recommended HP 40-60HP 40-60HP

Capacity (gallons) 30 30

Flow Rate (PSI) 30 gpm/2500psi 30gpm/2500psi

Mount 3PH 3PH

Weight 535 LBS. 575 LBS.

Height 48” 48”

Width 39” 39”

Depth 30” 32”

Max Operating Temp (°C) 2° C 30° C

Max Operating Time (hours) 2 Hour Duty Cycle Full Duty Cycle

Cooling System Included No Yes

SBLMPP-30 SBLMPPCS-30

41.855.664.2752

Meteor - Loader Mount

Models SBLM66 SBLM76 SBLM86

Recommended HP 40-60HP 40-60HP 40-60HP

Max Operating Weight

8,000 LBS. 8,000 LBS. 8,000 LBS.

Cutting Width 66” 76” 86”

Cutting Edge 3/8” x 3” 3/8” x 3” 3/8” x 3”

Skid Shoes 3/8” x 1-1/2” 3/8” x 1-1/2” 3/8” x 1-1/2”

Auger Tube 3-1/2” OD 3-1/2” OD 3-1/2” OD

Auger Flighting 5/16 x 2-1/4 5/16 x 2-1/4 5/16 x 2-1/4

Auger Diameter 19” 19” 19”

Roller Chain #60 #60 #60

Hitch Plate Quick-tach Quick-tach Quick-tach

Chute Rotation Hydraulic Hydraulic Hydraulic

Chute Diameter 12” 12” 12”

Main Body Height 31” 31” 31”

Chute Deflector Hydraulic Hydraulic Hydraulic

Fan Diameter 26” 26” 26”

Fan Depth 8” 8” 8”

Auger Drive Hydraulic Hydraulic Hydraulic

Fan Drive Hydraulic Hydraulic Hydraulic

Weight (LBS ) * 970 1,015 1,065

GEARBOX

www.mkmartin.ca5

Meteor - Single Auger

MK Martin's Meteor series 3PH snowblowers are built to get your work off the ground with durable performance and high-capacity design. The Meteor lineup is available in a range of models for 12 HP compact tractors to 200 HP farm tractors. The Meteor snowblowers are available in single auger, double auger, pull type, and skidsteer models.

Models SB48 SB54 SB60 SB68

HP (Rec ) 12 HP 15 HP 20 HP 30 HP

Cutting Width 48” 54” 60” 68”

Cutting Edge 1/4 x 1-1/2 3/8 x 1 3/8 x 1 3/8 x 1

Auger Diam 12” 14” 14” 14”

Fan Diam 19” 21” 21” 21”

Chute Diam 7” 8” 8” 10”

Chute Rotation (Man/Hyd)

Std/Opt Std/Opt Std/Opt Opt/Opt

Chute Deflector (Man/Hyd)

Std/NA Std/Opt Std/Opt Std/Opt

Main Body Height 22.5” 25” 25” 29”

3PH Mount CAT. 1 CAT. 1 CAT. 1 CAT. 1

Weight (LBS ) 266 366 396 506

GEARBOX

61.855.664.2752

Meteor - Single Auger

Models SB72 SB78 SB87 SB97

HP (Rec ) 35 HP 50 HP 60 HP 75 HP


Cutting Edge 3/8 x 1 1/2 x 1-1/2 1/2 x 2 1/2 x 2

Auger Diam 14” 15” 19” 19”

Fan Diam 21” 23” 27” 27”

Chute Diam 10” 10” 12” 12”


Opt/Opt Opt/Opt Opt/Opt Opt/Opt


Std/Opt Std/Opt Std/Opt Std/Opt

Main Body Height 29” 29” 36” 36”

3PH Mount CAT. 1 CAT. 1 & 2 CAT. 2 CAT. 2

Weight (LBS ) 540 748 1,034 1,106

• Gearbox• High Tensile Steel Ribbon

Flighting

• 3PH Quick Attach Compatible• Chute Rotation• 5 Blade Fan

Features

GEARBOX

www.mkmartin.ca7

Meteor - Double Auger

Models HP RPM

97D/108D 100-125 540

97D175/108D175 125-175 540

97DF1 75/108DF1 75 1 3/4 20 Tractor End 1,000

97DF/108DF 1 3/8 21 Tractor End 1,000

SB120D 150-200 540

SB120 DF 1 75 1-3/4 20 Tractor End 1,000

SB120DF 1-3/8 21 Tractor End 1,000

Models SB87D SB97D SB108D SB120D

HP (Rec ) 60 HP 100 HP 125 HP 200 HP

Cutting Width 87” 97” 108” 120”

Cutting Edge 1/2 x 2 1/2 X 6* 1/2 x 6* 1/2 x 6*

Auger Diam 15” (x2) 19” (x1) 15” (x1)

19” (x1) 15” (x1)

23” (x1) 15” (x1)

Fan Diam 27” 32” 32” 36”

Chute Diam 12” 13” 13” 13”


Opt/Opt NA/Std NA/Std NA/Std


Std/Opt Std/Opt Std/Opt Std/Opt

Main Body Height 36” 43” 43” 47”

3PH Mount CAT. 2 CAT. 2 & 3 CAT. 2 & 3 CAT. 2 & 3

Weight (LBS ) 1161 1900 1980 3010

Opt 1000 RPM - Yes Yes Yes

PTO Options

GEARBOX

81.855.664.2752

Meteor - Pull Type

Models SB60PT SB68 P/T SB78 P/T SB87 P/T SB97 P/T

HP (Rec ) 25 HP 35 HP 50 HP 60 HP 60 HP

Cutting Width 60” 68” 78” 87” 97”

Cutting Edge Bolt On (1/2 x 4)

Bolt On (1/2 x 4)

Bolt On (1/2 x 4)

Bolt On (1/2 x 4)

Bolt On (1/2 x 4)

Auger Diam 14” 14” 15” 19” 19

Fan Diam 18 21” 23” 27” 27”

Chute Diam 8” 10” 10” 12” 12”

Double Hood Deflector

N/A Std. Std. Std. Std.


Manual (std.) or

Hydraulic (opt.)

Manual (opt.) or

Hydraulic (opt.)

Manual (opt.) or

Hydraulic (opt.)

Manual (opt.) or

Hydraulic (opt.)

Manual (opt.) or

Hydraulic (opt.)


Std./Opt. 6” cyl.

Std./Opt. 6” cyl.

Std./Opt. 8” cyl.

Std./Opt. 8” cyl.

Std./Opt. 8” cyl.

Main Body Height

25” 25” 28” 32-1/2” 32-1/2”

3PH Mount Cat. 1 CAT. 1 CAT. 1 & 2

CAT. 2 CAT. 2

Weight (LBS ) 495 671 900 1,175 1,225

Optional Equipment• Manual Rear Lift Blade• Hydraulic Lift Option

• Tivar Cutting Edge

www.mkmartin.ca9

Features & Options

All models are built standard with 3 point hitches in Category 1 or Category 2, and are completely compatible with Quick Attach.

The Meteor five blade fan is ruggedly designed and built to quickly and consistently blow the snow out of the chute.

3PH / Quick Attach Five Blade Fan

Available on the 97, 108, and 120 models, a kit is available to allow larger tractors to run at 1000 RPM PTO. The 1000 RPM Kit also raises the input shaft to allow the PTO shaft to run at a lesser angle on larger tractors increasing the efficiency and life of the driveline components.

1000 RPM PTO Kit

To make sure you get the longest dependable service from your blower all Meteors have the highest quality High Tensile Steel Ribbon flighting on the auger providing strength to move the snow to the fan.

High Tensile Steel Ribbon Flighting

The heart of Meteor’s power train is the time-proven Comer gearbox.

Adjustable skid shoes are included with all snow blowers to protect your surface and your blower.

Gear Box Skid Shoes

101 855 664 2752

Features & Options

Meteor’s Multi Hinged Deflector provides you with finer control over where your snow is blown.

The extendible chute makes placing snow higher on the pile or into a truck easy and virtually spill free.

Meteor Snow Blower chute rotators come in manual (crank), hydraulic (orbital motor), and electric.

Manual Hydraulic Electric

Multi-Hinged Deflector

Truck Loading Chute

Chute Rotator

Exit chute deflectors are available in manual or hydraulic (optional).

Chute Deflector

GEARBOX

www.mkmartin.ca11

Meteor - Skidsteer

Meteor Snow Blowers for Skid Steer Loaders feature one piece side plate construction for added strength and rigidity. They also feature an offset chute for better operator vision.

Code “D” high flow package is recommended on the SSB 96.

Models SSB62 SSB66 SSB76 SSB86 SSB96

Cutting Edge (Bolt-On) 1/2 x 4 1/2 x 4 1/2 x 4 1/2 x 4 1/2 x 4

Cutting Width 62” 66” 76” 86” 96”

Auger Diam 19”

GPM (min) 14 14 14 23 33

Mounting Universal Skidsteer Attach

Auger Diam 19”

Chute Diam 11”

Main Body Height 31”

Chute Deflector (Man/Hyd) Std/Opt

Fan Diam 26”

Weight (LBS ) 900 925 950 975 1025

Flow Rates Code Flow Rates Code

14-17 GPM A 23-26 GPM C

18-20 GPM B 27-33 GPM C+

20-22 GPM B+ 33-40 GPM D

121.855.664.2752

Commercial SnowThrowers

Model 1048 1054FM 1048H

Widths 48” 54” 48”

Stages 1 1 1

PTO Drive 540 2500 N/A

HP 15-30 15-30 15-30

Mount CAT. I Skidsteer USSP

Rotor 16” 16” 16”

Torsion Style Chain Tensioner

Std. Std. Std.

Chute Rotator / Deflector

Man. / Man. Hyd. / Hyd. Hyd. / Man.

Cutting Edge Heat Treated Bolt-On

Heat Treated Bolt-On

Heat Treated Bolt-On

Skid Shoes Replaceable Replaceable Replaceable

1044H SnowThrower

www.mkmartin.ca13

Commercial SnowThrowers

Model 2048 2048H 2054 2054H

Widths 48” 48” 54” 54”

Stages 1 1 1 1

PTO Drive 540 N/A 540 N/A

HP 25-55 25-55 25-55 25-55

Oil Flow (GPM) N/A 20-35 N/A 20-35

Mount CAT. I USSP CAT. I USSP

Rotor 24” 24” 24” 24”


Std. N/A Std. N/A

Chute Rotator / Deflector Hyd. / Hyd. Hyd. / Hyd. Hyd. / Hyd. Hyd. / Hyd.

Cutting Edge Bolt-On AR400 Bolt-On AR400 Bolt-On AR400 Bolt-On AR400

Model 2060 2060H 2072 2072H 2084 2084H

Widths 60” 60” 72” 72” 84” 84”

Stages 1 1 1 1 1 1

PTO Drive 540 N/A 540 N/A 540 N/A

HP 25-55 25-55 25-55 25-55 25-55 25-55

Oil Flow (GPM) N/A 20-35 N/A 20-35 N/A 20-35

Mount CAT. I USSP CAT. I USSP CAT. I USSP

Rotor 24” 24” 24” 24” 24” 24”


Std. N/A Std. N/A Std. N/A


Hyd. / Hyd.

Hyd. / Hyd.

Hyd. / Hyd.

Hyd. / Hyd.

Hyd. / Hyd.

Hyd. / Hyd.

Cutting Edge Bolt-On AR400

Bolt-On AR400

Bolt-On AR400

Bolt-On AR400

Bolt-On AR400

Bolt-On AR400

Model 3084 3096 3108

Widths 84” 96” 108”

Stages 1 1 1

PTO Drive 540 540 540

HP 40-100 40-100 40-100

Mount Cat. II Cat. II Cat. II

Rotor 30” 30” 30”

Torsion Style Chain Tensioner Std. Std. Std.

Chute Rotator / Deflector Hyd. / Hyd. Hyd. / Hyd. Hyd. / Hyd.

Cutting Edge Bolt-On AR400 Bolt-On AR400 Bolt-On AR400

141.855.664.2752

Commercial SnowThrower Features

The carbide skid shoes and cutting edge are available on all models, giving you longer life for both the skid shoes and cutting edge.

Ideal for those with an open cab or those without hydraulic hookups, the manual chute allows you to manually rotate the chute to control the direction of the snow as you throw it.

Carbide Skid Shoes and Cutting Edge

Manual Chute Rotator

The manual chute deflector allows you to change the height of the thrown snow without hydraulic hookups.

Manual Chute Deflector

The multi-hinged deflector allows the snow to be dumped closer to the blower, making it ideal for sidewalks and municipal use.

Multi-Hinged Deflector

The short chute is less likely to clog during high speed clearing making it the ideal companion for your snow thrower.

Short Chute

www.mkmartin.ca15

Pull-Type SnowThrower

2087PT SnowThrower

Model 2087PT 3096PT

Widths 87” 96”

Stages 1 1

PTO Drive 540 540

HP 40-60 40-100

Mount CAT. I Cat. II

Rotor 24” 30”


Std. Std.


Hyd. / Hyd. Hyd. / Hyd.

Cutting Edge Bolt-On AR400 Bolt-On AR400

Floating Rear Scraper Blade

Std. Std.

161.855.664.2752

Commercial SnowBlowers

6120RH SnowThrower

Model 4108 4120

Widths 108” 120”

Stages 2 2

PTO Drive 1000 1000

HP 80-120 80-120

CAT CAT. II CAT. II

Fan Size 36” 36”

Fan Depth 12” 12”

Fan Blades 6 6

Augers 12” (top) & 20” (bottom) solid flight top auger

Hydraulic Rotating Fan Housing

N/A N/A

Hydraulic Chute Rotator Std. Std.

Cutting Edge 3/4” x 6” Heat Treated Bolt-On

Skid Shoes Adjustable Adjustable

De-Icing Auger Drive Sprockets with Torsion Chain Tensioners

Std. Std.

www.mkmartin.ca17

Commercial SnowBlowers

Model 6108 6108RH 6120 6120RH

Widths 108” 108” 120” 120”

Stages 2 2 2 2

PTO Drive 1000 1000 1000 1000

HP 80-300 80-300 80-300 80-300

CAT CAT. II CAT. II CAT. II CAT. II

Fan Size 36” 36” 36” 36”

Fan Depth 12” 12” 12” 12”

Fan Blades 6 6 6 6

Augers 12” (top) & 24” (bottom) solid flight top auger

Hydraulic Rotating Fan Housing N/A Opt. N/A Opt.

Hydraulic Chute Rotator Std. Std. Std. Std.


Skid Shoes Adj. Adj. Adj. Adj.


Std. Std. Std. Std.

Model 8108 8120

Widths 108” 120”

Stages 2 2

PTO Drive 1000 1000

HP 150-300 150-300

CAT CAT. II CAT. II

Fan Size 50” 50”

Fan Depth 12” 12”

Fan Blades 6 6

Augers 14” (middle & top) & 24” (bottom) solid flight top auger

Auger Chains 100 (middle & top) & 120 (bottom)

Enclosed Chain Bath Std. Std.

Rotating Fan Housing Opt. Opt.

Hydraulic Chute Rotator Std. Std.


Skid Shoes Adjustable Adjustable


Std. Std.

181.855.664.2752

Commercial SnowBlower Features

This custom built gearbox was built to handle the toughest circumstances and deliver 300 continuous horsepower to the augers. The heat treated 3-3/4” wide spur gears transfer power form your tractor to the fan.

The skidshoe provides incremental adjustment as it wears so both skid shoes wear together.

1000 RPM Gearbox Adjustable Skid Shoes

The hydraulic rotator is ideal for tractors with cabs or for contractors/property managers needing to make frequent adjustments.

Hydraulic Chute Rotator

To prevent chain jumping from ice buildup, the sprockets feature reliefs which allow the sprockets to self clean as they mesh with the chain.

Self-Deicing Auger Sprockets

The rotating fan housing allows operators to quickly move snow into windrows by discharging the snow to the right or left without passing it through the chute.

All Commercial Meteor SnowBlowers feature a standard 6 blade fan. The six blades not only evacuate high volumes of snow quickly, but also feature tighter tolerance to the housing increasing velocity of the snow exiting the chute.

Rotating Fan Housing Six Blade Fan

www.mkmartin.ca19

Commercial SnowBlower Options

The 1000 RPM to 540 gear reducer is designed to reduce the your tractor’s PTO speed from 1000 RPM to 540 RPM.

Torsion sprung tensioners ensure that the appropriate amount of pressure remains on the chain to preventing skipping.

1000 to 540 Auger Chain Torsion Tensioners

Positioned on the side of the chute, these work lights allow you to see better when working in low light conditions.

Work Light KitThe telescopic chute is ideal for blowing snow into trucks or tall snow banks in high snow fall areas.

Telescopic Chute

Available either in fixed or hydraulic options, these bank cutters reach above the blower’s body directing snow down to the augers.

The multi-hinged deflector allows the snow to be dumped closer to the blower, making it ideal for sidewalks and municipal use.

Bank Cutters Multi-Hinged Deflector

Landscape/Estate Products

GEARBOX

www.mkmartin.ca21

Pulsar

The PTO powered Pulsar series of rotary cutters provide excellent mowing and shredding performance for tractors rated between 20-50 HP. The 3PH mount models are available in a variety of cutting widths providing a cutting path from 48” - 72”. To better adapt to your conditions, the Pulsar features an adjustable cutting height of 2” - 10” and a floating top link. This combination allows you to get the ideal cut for your field or roadside.

The gearbox on the Pulsar Rotary Cutter is backed by a 5 Year Limited Warranty.

Model PRC48LD PRC48 PRC60 PRC66 PRC72 PRC72HD

Cutting Path 48” 48” 60” 66” 72” 72”

Shipping Weight (LBS )

420 480 600 640 700 740

Tractor HP (min)

20 20 30 40 50 50

3PH Mount Cat 1 Cat 1 Cat 1 Cat 1 Cat 1 Cat 1

PTO RPM 540 540 540 540 540 540

Blades 1/2” x 3” 1/2” x 3”

1/2” x 3”

1/2” x 3”

1/2” x 3”

1/2” x 3”

Tip Speed (Ft/Min)

13100 13100 12462 13708 14955 14955

Wheels 16” (Air Filled)

16” (Segmented)

221.855.664.2752

Pulsar

Pulsar Blade Assembly

Segmented Wheel

Slip Clutch

Floating Top Link

Chain Curtain Option

Fixed Skid Shoe

GEARBOX

www.mkmartin.ca23

Pulsar Plus

The Pulsar Plus for tractors comes rated between 40 - 80 HP. This updated mower features not only Category 1, but also Category 2 and Quick Tach mounting options to fit your equipment. With a cutting path ranging from 60” - 120”, and a cutting height of 2” - 10” with the standard floating top link, this mower will get the job done the first time. To ensure even cutting and shredding every time, the deck has been outfitted with 3 blades covering more area on each pass.


Model PRCPLUS60 PRCPLUS72 PRCPLUS84 PRCPLUS96 PRCPLUS120

Cutting Path 60” 72” 84” 96” 120”

Shipping Weight (LBS )

700 865 1220 1475 1425

Tractor HP (min) 30-40 60 60 80 80

3PH Mount Cat 1 & 2 Quick Tach compatible Draw Bar Hitch

PTO RPM 540 540 540 540 540

Blades 3 - 1/2” x 3”

3 - 1/2” x 3”

3 - 1/2” x 3”

3 - 1/2” x 3”

6 - 1/2” x 4”

Tip Speed (Ft/Min) 12462 15260 17803 16500 14500

Wheels 16” Segmented 16” Pneumatic

241.855.664.2752

Pulsar Plus

Blade Assembly

Segmented Wheel

Slip Clutch

Floating Top Link

Chain Curtain Option

Bolt-On Skid Shoe

GEARBOX

www.mkmartin.ca25

Pulsar Wing

New for 2017, MK Martin presents the Pulsar Wing. Available in a 15’ model, the three triple blade assemblies make short work of stubble whether in the pasture, field, or brush. Each wing can independently float 20° in either direction to conform to the contours of the ground. The 15’ width of the cutter can be greatly reduced by folding up both hydraulic wings to better transport from one field to another, and to store the cutter in tight spaces.

Features & Options• 15’ dual wing rotary cutter• 4 heavy duty gearboxes, each covered with limited 5 year warranty• Transport lock for each wing• 1.5” diameter cutting capacity

261.855.664.2752

Pulsar Wing

Model PW180

Shipping Weight (LBS ) 4,400

3PH Mount Draw Bar Hitch

Cutting Height 3”-15”

Cutting Path 180”

Max Brush Diameter 1.5”

Overall Width (Wings Down) 184”

Folded Width (Wings Up) 78”

Tip Speed (Ft/Min) 15,100 ft/min on Wings 14,850 ft/min on center

Wheels (Pneumatic) 21”

Blades 9 blades 1/2”x4”

Tractor HP (min) 75HP

PTO RPM 540

Gearbox Rating (Wing) 140 HP

Gearbox Rating (Center) 105 HP

Gearbox Rating (Divider) 87 HP

Deck 3/16”

Stump Jumper Yes

Shear Pin Independent Slip Clutch on Each Spindle

www.mkmartin.ca27

Pulsar - Skidsteer

Flow Rates Pack Codes

14-17 GPM A

18-20 GPM B

20-22 GPM B+

23-26 GPM C

27-33 GPM C+

33-40 GPM D

Model (Hydraulic) PRCH60 PRCH72

Shipping Weight (LBS ) 770 985

3PH Mount NA NA

Cutting Height min 2” min 2”

Cutting Path 60” 72”

Max Brush Diameter 2” 2”

Overall Width 66” 78”

Tip Speed (Ft/Min) See Flow Chart See Flow Chart

Acres/Hr (5 MPH) 2.73 3.27

Wheels (Segmented) NA NA

Blades (Qty ) 1/2” x 3” (3) 1/2” x 3” (3)

Hydraulic Requirement * See Flow Chart See Flow Chart

Deck 3/16 3/16

Stump Jumper Yes Yes

Protection Relief Valve Relief Valve

To ensure optimum performance, hydraulic output must match motor package.

The hydraulically driven Pulsar series was designed for mowing grass and light brush, up to 2” in diameter. Available in 60” and 72” cutting widths the skidsteer mount Pulsar can cut almost any desirable height.

The heavy 3/16” material deck and deck supports provide the durability for many years of dependable service. The front of the Pulsar features a push bar that bends tall grasses and brush under the deck. Our unique drive spindle is supported by 2 bearings allowing us to couple the hydraulic motor directly onto the drive spindle, eliminating the need for a gearbox.

With the standard 3 blades on the blade bar coupled with our unique float linkage, the Pulsar follows the contour of your cutting area.

GEARBOX

281.855.664.2752

Pulsar - Finishing Mower

The Pulsar Finishing Mower is available for a wide variety of lawn mowing applications. Available in 4 sizes, there is a size to fit your mowing needs. Riding on 4 solid rubber tires, the Pulsar Finishing Mower floats smoothly over your lawn without worry of flat tires. A floating top link ensures that all 4 wheels keep contact with the ground as your 3PH equipped tractor pulls it along.

Model PFM48RD PFM60RD PFM72RD PFM90RD


Overall Width 50” 62” 74” 93”

Weight (LBS ) 370 435 525 714

Acres/Hr@5 MPH 2.43 3.03 3.63 4.57

HP Required 14/20 20/25 25/30 30/40


RPM @ PTO Shaft 540 540 540 540

Number of Blades 3 3 3 5

Tip Speed (Ft/Min) 15,660 18,000 16,850 16,288

Wheels Solid Rubber Wheel

Solid Rubber Wheel

Solid Rubber Wheel

Solid

Cutting Height 2” - 5” 2” - 5” 2” - 5” 2” - 5”


www.mkmartin.ca29

Axis Tool Arm

The Axis Tool Arm has been developed to provide an economical alternative for mowing road side ditches or along side fences. Offset design allows plenty of room to clear the tractor tires, as well as keeping the tractor on a more level surface. Should you hit a solid object with the outer edge of the tool attached to the arm, we have shear bolt protection on a breakaway link. With a 55º cutting angle with the cylinder extended, and 90º cutting angle with the cylinder retracted, the operator has lots of flexibility to match whatever terrain they are working with.

Model AXIS4 AXIS5-6

Weight (LBS ) 751 900

Offset 60” 84”

3PH Mount CAT. 1 CAT. 1 & 2

Minimum Tractor Weight (LBS ) 2,900 5,800

Maximum Tool Weight (LBS ) 480 800

4’ Rotary Cutter req. min. 30 HP



Cutting Angle Cyl Ext 55°

Cutting Angle Cyl Ret 90°

Tractor Remotes Req 2

Protection Shear Bolt Shear Bolt

PANTONE: 2422 UPANTONE: 2422 U

301.855.664.2752

Axis Tool Arm

Hydraulic Tool LiftThe Axis Tool Arm hydraulically pivots on your 3PH raising and lowering the tool as needed. With the Axis fully raised the mower can be folded in to provide safe road travel (image below).

Hydraulic Tool RotationTo provide the best results when mowing along ditches or around ponds the tool carrier is hydraulically adjustable allowing the mower to be adjusted to match the grade.

Stabalizer Arm to CutterVarious attachment bracket are supplied with the Axis Toolbar to attach the Stabilizer Bar to the cutter. All four adaptors are included.

Shown in order: Pulsar, Kodiak, Fork Rear Wheel Style with 180° Wheel Adjuster, Fork Rear Wheel Style with Flat Wheel Adjuster

Retractable Weight BarTransport Lock

www.mkmartin.ca31

3PH Box Scraper

The 3PH Box Scraper by MK Martin provides the small and large property owner with affordable options for grading with their line of box scrapers. Complete with steel cutting edges, height adjustable shanks, and a fully welded 3PH design these Box Scrapers really deliver.

The MK Box Scraper features two steel cutting edges. One located on the inside of the box and one on the outside. These two reversible hardened steel cutting edges allow the operator to pull or push material.

Model Width Shanks Mouldboard End Plates

3PH Mount

Weight (LBS )

448 STD 4’ 4 3/16” 1/4” CAT. 1 308

560 STD 5’ 4 3/16” 1/4” CAT. 1 348

566 HD 5’6” 5 3/16” 1/4” CAT. 1 415

672 HD 6’ 6 3/16” 1/4” CAT. 1 450

784 HD 7’ 7 3/16” 1/4” CAT. 1 500

784 DLX 7’ 7 1/4” 1/4” CAT. 2 555

896 DLX 8’ 8 1/4” 1/4” CAT. 2 612

The height adjustable scarifier shanks break up the soil allowing the cutting edge to redistribute the material as the box scraper is pulled along. Removeable shanks feature replaceable scarifier tips.

Height Adjustable & Replaceable Scarifier Tips

321.855.664.2752

Scraper Blade

The 3PH Scraper Blade from MK Martin makes maintaining your driveway and gravel areas easy. Ruggedly built with a reversible cutting edge, these blades are designed for years of service.

The Manual Blades have five stops of angle adjustment including a full turn around. While the Hydraulic Angle blades allow you to control the blade from the comfort of your seat. With widths to match your equipment and property there is a MK Scraper blade to help keep your grades up.

Shown with optional Hydraulic Angle blade

Model Max HP

Width Mouldboard Center Pin

3PH Mount

Weight (LBS )

MKGB588 45 5’ 3/16” 2” CAT. 1 180

MKGB688 45 6’ 1/4” 2” CAT. 1 200

MKGB788 45 7’ 1/4” 2” CAT. 1 215

MKGB798 75 7’ 3/8” 3” CAT. 2 577

MKGB898 75 8’ 3/8” 3” CAT. 2 616

Features• 1/2” x 6” reversible cutting edge• Full turn around with five locations forward and reverse on manual only• 1/4” mouldboard - 88 Series• 3/8” mouldboard - 98 series

www.mkmartin.ca33

XD Grader Blade

The Extreme Duty Grader Blade from MK Martin mounts to your tractors 3-point hitch. Powered by your tractors hydraulics the XD series blade has hydraulic cylinders to adjust the offset of the arm, the blade angle, and the tilt of the blade. An additional hydraulic cylinder on the optional wheel kit helps to control the depth.

The Extreme Duty grader blade is available in 8’, 9’ and 10’ models for tractors with a rated horsepower of 100 and 150 HP.

Available options include dual gauge wheel kit with hydraulic cylinder.

Extreme Duty Grader Blade for 100-150 HP Tractors

Hydraulic Angle

Hydraulic Tilt Hydraulic Offset

341.855.664.2752

XD Grader Blade

Model 8XD-100 9XD-100 9XD-150 10XD-150

Horse Power (Max ) 100 100 150 150

3PH Mount CAT. 2 & 3

Mouldboard Thickness 5/16”

Mouldboard Width 96” 108” 108” 120”

Mouldboard Height 20”

Offset Adjustment 27” left or right (hydraulic)

Adjustment Angle 32° left or right (hydraulic)

Adjustment Tilt 13° blade adjustment (hydraulic)

King Pin 3-1/2” 3-1/2” 4” 4”

Cutting Edge High Carbon 1/2” x 6” (reversible)

Weight (LBS ) 1,572 1,666 1,695 1,745

www.mkmartin.ca35

Land Leveler

These rugged scrapers come in a range of sizes from 8 to 12 feet to fit your needs and your equipment. Standard on all models is our 1/2 inch thick reversible hardened cutting edge, ready to smooth out the bumps and fill in the hollows. Cutting depth is controlled by a 3”x12” hydraulic cylinder so you can decide how much of a bite to take and adjust on the go. All models are well suited for feedlot and soil reclamation or swale cutting.

Model LLT-8 LLP-8 LLP2-8 LLT-10 LLP-10 LLP2-10 LLT-12 LLP-12 LLP2-12

Width 8’ 8’ 8’ 10’ 10’ 10’ 12’ 12’ 12’

Mount Hitch 3PH 3PH Hitch 3PH 3PH Hitch 3PH 3PH

Tilt Yes NA NA Yes NA NA Yes NA NA

Cutting Edge Single Single Double Single Single Double Single Single Double

Side Plate 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8”

Mouldboard 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

Wear Plate NA 3/4” 3/4” NA 3/4” 3/4” NA 3/4” 3/4”

Skidbar 1/2” Reversible

NA NA 1/2” Reversible

NA NA 1/2” Reversible NA NA

Weight 1,555 838 945 1,771 956 1,090 1,898 1,077 1,238

361.855.664.2752

Land Leveler

Features• 1/2” x 6” reversible hardened cutting edge• Equipped with a 15” jack• 3” x 12” hydraulic lift cylinder• 3” x 6” cylinder to tilt 10° each way

Adjustable Skid Bars

Tilt Indicator Transport Lock

Model LLT-8 LLP-8 LLP2-8 LLT-10 LLP-10 LLP2-10 LLT-12 LLP-12 LLP2-12

Width 8’ 8’ 8’ 10’ 10’ 10’ 12’ 12’ 12’

Mount Hitch 3PH 3PH Hitch 3PH 3PH Hitch 3PH 3PH

Tilt Yes NA NA Yes NA NA Yes NA NA

Cutting Edge Single Single Double Single Single Double Single Single Double

Side Plate 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8”

Mouldboard 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

Wear Plate NA 3/4” 3/4” NA 3/4” 3/4” NA 3/4” 3/4”

Skidbar 1/2” Reversible

NA NA 1/2” Reversible

NA NA 1/2” Reversible NA NA

Weight 1,555 838 945 1,771 956 1,090 1,898 1,077 1,238

www.mkmartin.ca37

Grader Leveler

This two in one combination of leveling and scraping makes short work of your grading jobs. The first blade attacks the high spots cutting them down to size, the second blade further scrapes anything the first missed and fills in the hollows. With two blades cutting and filling it takes much less time and fewer passes to achieve the even distribution of material you are looking for.

The scraper can be 3PH mounted, or equipped with a skidsteer adapter plate puts the work in front of you.

Model 578 678 778 878

Working Width 60” 72” 84” 96”

Overall Width 65” 77” 89” 101”

Skid Shoes 3/8” x 2 Reversible

3/8” x 2 Reversible



Mouldboard Thickness 1/4” 1/4” 1/4” 1/4”

Cutting Edge 1” Adjustment

1” Adjustment

1” Adjustment

1” Adjustment

Weight (LBS ) 566 630 696 760

381.855.664.2752

Track Curry

Groom your track or arena surface with the MK Martin Track-Curry. This easy to use tool will allow you to condition the surface of your track to your desired firmness. With two rows of heavy duty S-tines to cultivate the ground, an adjustable leveling bar fastened to the rear of the S-tines and 12” rolling drum behind the leveling bar provides an accurate depth gauge to cultivate and pack your soil for optimum performance. The MK Martin Track-Curry will condition your arena or track to the footing most suited to the health and safety of your horses.

Model TC-5 TC-6 TC-7 TC-8

Working Width 5’ 6’ 7’ 8’

Number of Shanks 13 15 17 19

Shank Size 1-1/4” x 3/8” x 22”

Shank Clearance 16” 16” 16” 16”


HP Rating 18 - 32 22 - 39 26 - 47 30 - 53

Weight (LBS ) 460 530 640 725

Leveling Bar 1/2” x 6” (double beveled)

Spill Plates

Optional Wing

Scarifier Bar

Sprinkler Kit

GEARBOX

www.mkmartin.ca39

Rotary Tiller

Prepare your seedbed or garden for planting using the MK Martin Rotary Tiller. With standard features such as adjustable skidshoes, floating deflector, replaceable tines, and an oil bath drive chain this tiller easily loosens soil for a variety of applications.

Available in a range of sizes, there’s an MK Rotary Tiller for any application.

Models RT486 RT606 RT726

Horsepower 15-30 HP 20-50 HP 25-60 HP

Hitch CAT 1.

Inner Width (in ) 50 58 74

Overall Width (in ) 55.375 63.375 79.375

Weight (lbs ) 475 500 575

Number of Flanges 6 7 9

Tines/Flange 6 (C-Shape)

Flange Spacing (in ) 7.75

Max Tillage Depth (in ) 6.5

Number of Skid Shoe Settings

5

Rotor Diameter (in ) 17”

Rotor Speed @ 540 PTO (RPM)

211

Gearbox (HP) 50HP @ 540

Drive Chain #80

401.855.664.2752

Landscape Rake

Features• CAT. 1 Quick Tach compatible• 5/16” x 1” x 15.25” spring tines • 5 forward and 3 reverse positions with manual adjustment

Model MKLR5 MKLR6 MKLR7

Width 5’ 6’ 7’

MAX HP 50 50 50

Weight (LBS ) 250 263 285

Tines 30 36 42

www.mkmartin.ca41

The line of economy cultivators can be used in small fields and gardens.

Model CU-5 CU-6 CU-7

Working Width 60” 72” 84”

Overall Width 60-1/2” 72-1/2” 84-1/2”

Weight (LBS ) 164 193 222

Tines (Heat Treated) 9 tines 11 tines 13 tines

3PH Mount CAT. 1 CAT. 1 CAT. 1

Cultivator

421.855.664.2752

Fill Type Weight Per Cubic Foot (lbs )

Concrete 150

Gravel 110

Sand 100

Weight Box

With a material holding volume of 3.5 cubic feet and maximum holding weight capacity of 525 LBS., this new weight box can add up to 575 LBS. of balancing weight to your CAT. 1 3PH. This added weight backs up your tractor by off setting your loader mounted attachments helping to keep your tractor safely balanced during operation.

Specifications MKWB

Hitch Type CAT. 1

Box Volume 3-1/2 cu ft

Max Weight (box and fill) (LBS ) 575

Max Weight (fill only) (LBS ) 525

Quick Hitch Compatible Yes

www.mkmartin.ca43

This general purpose 3PH Utility Dump Box comes in two sizes for the home owner, landscaper or wood lot owner.

• 3PH hookup CAT. 1• Quick and easy dump• Raise and lower to desired height for loading• Heavy duty tubular sub frame• 14 GA. material box structure

Model Cap Size Weight (LBS )

DB495 30 cu ft 18” x 48” x 48” 290

DB395 10 cu ft 10” x 36” x 36” 120

Dump Box

Agricultural Products

www.mkmartin.ca45

Gravity Box

• Viewing Windows• LED Road Lights• Front Ladder

• Unloading Door includes metering door

• Solid Welded Box Interior

Standard Features

Model MK 3200 MK 5000 MK 6500

Extension N/A 8” 19” N/A 8” 12” N/A 8” 12”

Capacity (Bushels) 320 375 450 500 570 605 645 745 800

Hopper Construction 14 GA. 12 GA. 12 GA.

Under Structure 3” x 6” x .188 wall rectangular tube 4” x 8” .188” wall rectangular tubing

4” x 8” .188” wall rectangular tubing

Unloading Door 45’ width 57” width (standard) 28” width x2 (divider)

57” width (standard) 28” width x2 (divider)

Chute Height 17”-20” 17”-21” 16”-20”

Box Dimensions

Length 158” 158” 158” 196” 196” 196” 229” 229” 229”

Width 96” 96” 96” 101” 101” 101” 115” 115” 115”

Height (less wagon) 78” 86” 98” 89” 98” 101” 91” 99” 103”

Height (wagon & 22 5” wheel)

102” 110” 122” 123” 131” 135” 125” 133” 137”

Wheel Base 112” 142” 156”

461.855.664.2752

Gravity Box

• Horst Running Gear• Center Dump Deflector• Divider Kit

• Grain Shield Tarp Kit• Hydraulic Door Opener• Rear Ladder Kit

Optional Equipment

Model MK 3200 MK 5000 MK 6500

Extension N/A 8” 19” N/A 8” 12” N/A 8” 12”

Capacity (Bushels) 320 375 450 500 570 605 645 745 800

Hopper Construction 14 GA. 12 GA. 12 GA.

Under Structure 3” x 6” x .188 wall rectangular tube 4” x 8” .188” wall rectangular tubing

4” x 8” .188” wall rectangular tubing

Unloading Door 45’ width 57” width (standard) 28” width x2 (divider)

57” width (standard) 28” width x2 (divider)

Chute Height 17”-20” 17”-21” 16”-20”

Box Dimensions

Length 158” 158” 158” 196” 196” 196” 229” 229” 229”

Width 96” 96” 96” 101” 101” 101” 115” 115” 115”

Height (less wagon) 78” 86” 98” 89” 98” 101” 91” 99” 103”

Height (wagon & 22 5” wheel)

102” 110” 122” 123” 131” 135” 125” 133” 137”

Wheel Base 112” 142” 156”

2019

www.mkmartin.ca47

1200 Gravity Box

Model MKGW12000

Capacity (Bushels) 1200

Included Wagon 608 Horst Wagon

Tires 425

Brakes 4 Wheel

Safety Chain Yes

Spring Double

481.855.664.2752

Grain Cart

Model MK 650 MK 850 MK 1050

Capacity (Bushels) 650 850 1,050

Unload Time (Approx ) 2 mins 2 mins 2 mins

Auger (One Vertical) 16” 18” 22”

Auger Height 160” 160” 159”

Auger Chute Deflector N/A Hydraulic Hydraulic

Auger Reach 66” 60” 50”

Weight (Approx ) (LBS ) 7,050 9,200 13,500

Tongue Weight (Empty) (LBS ) 1,000 1,000 3,000

Tongue Weight (Loaded) (LBS ) 3,400 3,400 4,300

PTO (RPM) 1,000 1,000 1,000

Hopper Material 12 GA. Steel 12 GA. Steel 12 GA. Steel

Undercarriage (Construction) 8” x 4” x 1/4” Tubing

8” x 4” x 5/16” Tubing

8” x 4” x 3/8” Tubing

Axle 5” x 5” x 1/2” Tubing

5” x 5” x 1/2” Tubing

5” x 5” x 1/2” Tubing

Tire Size (Ply) 800/65 R32 900/60 R32 1,050/50 R32

Hubs 10 Bolt 10 Bolt 10 Bolt

Rims 27 x 32 27 x 32 36 x 32

Spindles 5” diam. 5” diam. 6” diam.

850 Grain Cart

www.mkmartin.ca49

Forage King - Bale Handler

The Forage King Bale Handler is constructed of 1 x 1 x 0.083w tubing giving it unmatched strength in its class. 1 sealed bearings on all shafts make it a low maintenance piece of equipment to care for.

Features• 1” shafts that turn on sealed ball bearings• 7-tooth cast sprockets on keyways• No. 55 detachable link carrier chain• Heavy, durable 1” square tubing overall• Comes in sections so system bolts together in any configuration as

required

MB10 Basic Drive MBC Bale Chute

Center SectionsMC8MC12

MSL Slide Chain Lifter

501.855.664.2752

Implement Caddy

The Implement Caddy by MK Martin converts your 3PH implements to trailed versions when access to a 3PH equipped unit is not available. Hydraulically raise and lower caddy to desired height. This alternative to conventional 3PH mounting allows greater flexibility over your work force.

Model SCIC250 SCIC1700

Width 125” 152”

MAX HP 250 500

Weight (LBS ) 3,560 ** 7,750

Lift Cyl 3-1/2 x 16 5 x 14

Lift Capacity (LBS ) 12,000 20,000

Category CAT. 2 & 3 CAT. 4

Tires 12.5L 16.5 x 16.1

65

43

2

1

www.mkmartin.ca51

Strip Cat

The Strip Cat is fully adjustable to your field conditions. Available in a 3PH or Trailed version the Strip Cat can be set up for either liquid or dry fertilizer application allowing an all in one tilling and fertilizing solution.

4

2 5

3 6

Hydraulic Reset

Row Depth Control & Residue Sizing

Sunco Trash Managers

Mole Knives

Berm Builders

Pack Wheels

1

521.855.664.2752

Strip Cat

Benefits• Reduces field travel and compaction• Improves fertilizer management• Reduces soil erosion• Increases germination

Features• Choose from 4-6-8-12-16 Row Units• Standard 30” Spacing (Optional 22” Spacing)• Independent row units with adjustable down pressure• Dry lube bushings in joints• Adjustable IRD Depth wheels• 20” notched coulters (30% more cutting)• Sunco Trash Managers to clean the tilled strip• Independent spring loaded berm builders

(height and angle adjustment)• Dual wheel packers with adjustable down pressure• All pull pin adjustments

www.mkmartin.ca53

Strip Cat

541.855.664.2752

Model Description 6 Row

(30”

Rigid

)

8 Row

(30”

Rigid

)

12 Ro

w (30

” Fold

ing)

16 Ro

w (30

” Fold

ing)

18 Ro

w (22

” Fold

ing)

SCTB6R30 6 row 30” tool bar 1 - - - -

SCTB8R30 8 row 30” tool bar - 1 - - -

SCTBSF12R30 12 row 30” Stack N Fold - - 1 - -

SCTB12R30 12 row 30” tool bar - - 1 - -

SCTBSF16R30 16 row 30” Stack N Fold - - - 1 -

SCTB16R30 16 row 30” tool bar - - - 1 -

SCTB28R22 18 row 22” tool bar - - - - 1

SCBRU Generation II row unit 6 8 12 16 18

SCSNC Notched Coulter 6 8 12 16 18

SCSWC Wavy Coulter 6 8 12 16 18

SCSTM Sunco Trash Manager 6 8 12 16 18

ST5011196 Floating Trash Manager mnt 3 4 6 8 9

SCIRDT Depth Gauge Wheel (set) 6 8 12 16 18

SCIRDC Coulter Depth Gauge Wheel 6 8 12 16 18

22855 Fixed Knife Adaptor 6 8 12 16 18

SCNIBBD Independent Berm Builder (cupped) 6 8 12 16 18

SCNIBBC Independent Berm Builder (wavy) 6 8 12 16 18

SCBPT Berm Packer (urethane) 6 8 12 16 18

SCBPW Berm Packer (wire) 6 8 12 16 18

SCBE Berm Enhancer 6 8 12 16 18

SCKLSTS Knife Shank w/repl. Standard Point (liquid) 6 8 12 16 18

SCKDDTL Knife Shank w/repl. Low Draft Point (liquid/dry) 6 8 12 16 18

SCCK10 10 degree knife coulter 6 8 12 16 18

SCCK15 15 degree knife coulter 6 8 12 16 18

SCHTA6R30 6 row 30” hydraulic tripper 1 - - - -

SCHTA8R30 8 row 30” hydraulic tripper - 1 - - -

SCHTASF12R30 12 row 30” hydraulic tripper (For Stack N Fold) - - 1 - -

SCHTA12R30 12 row 30” hydraulic tripper - - 1 - -

SCHTASF16R30 16 row 30” hydraulic tripper (For Stack N Fold) - - - 1 -

SCHTA16R30 16 row 30” hydraulic tripper - - - 1 -

SCHTA18R22 18 row 22” hydraulic tripper - - - - 1

SCSGW Standard Gauge Wheel (set) 1 1 1 1 1

SCPDGW Pump Drive Gauge Wheel (set) 1 1 1 1 1

SCTDF Trailer Hitch 1 1 1 1 1

SCSTPO Replacement knife point (mini Mole)(Parts) 6 8 12 16 18

SCLDPO Replacement knife point (low draft)(Parts) 6 8 12 16 18

www.mkmartin.ca55

Stack N Fold Toolbar

The Stack N Fold Toolbar from MK Martin is designed to provide safe and easy transport of Strip Cat strip till systems. By stacking both end sections over the center section, the Stack N Fold Toolbar quickly reduces the overall width providing easier transport from field to field. The over centre design and locking pins ensure that the end sections remain securely in place during travel and when in storage.

Stack N Fold Toolbars can be configured with 2 to 4 remotes allowing you to control each side of the toolbar separately. This allows for easier service and maintenance, as well as for custom operations when you may not need the full width of the Strip Cat such as on headlands and point rows.

Features• Available from 8-Row to 18-Row• Allows for parallel horizontal stacking of row units• Ideal for transport and storage• Equipped with 2 large cylinders (5x30 fold cyl.)• Equipped with 2 small cylinders (2x4)• Requires 2 to 4 remotes depending on configuration

561.855.664.2752

Disc Mower Implement Caddy

Features

The MK Disc Mower Implement Caddy transforms your 3PH disc mower into a pull type unit to help reduce wear on the mower while reducing stress from your tractor. Using the adjustable top link, you can connect your disc mower faster and easier than before, and with the addition of the adjustable you can level your caddy and mower for an even cut as you drive along.

The MK Disc Mower Implement Caddy comes in two models: inline (C1201) and offset (C1200).

Model MKC1200 MKC1201

Weight (LBS ) 1,900 1,835

Lift Cyl 3x8 3x8

Tires 11L 15 11L 15

Main Frame 7x7 Tube 7x7 Tube

RPM 540 540

Driveline #5 #5

Adjustable Hitch Hydraulic (Option)

3950 Steffler Rd., Elmira Ontario, N3B 2Z3 Toll Free: 855-664-2752 Tel.: 519-664-2752 Fax: 519-664-3695 Email: [email protected]

www mkmartin ca

Authorized Dealer

18172-01 | Printed in Canada E&OE November 2018

Documents

YEAR GEARBOX - MK Martin · GEARBOX 11 Meteor - Skidsteer Meteor Snow Blowers for Skid Steer Loaders feature one piece side plate construction for added strength and rigidity. They