Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
2
CONTENTS
1. Mission
2. Vision
3. Targets
4. About Our Company
5. Quality Policy
6. Training
7. Organization Chart
8. Field of Activities of the Firm
9. Projects
10. Equipment
11. Technical Inspections
12. Legal Address and Contact
13. Corporate Certificates
3
MISSION
To develop Technologies minimizing energy costs without any comprise of quality at all
and manufacture excellent, environment-friendly products reducing energy costs with our
Professional technical staff.
VISION
To be a leading organization in the field that continue its pioneering position in the heating
sector, constantly improving quality production performance by use of clean energy technologies.
TARGETS
To design and manufacture ecologic products for use of fossil fuels by means of energy
generation techniques that our country needs and thus contribute to the national economy.
ABOUT OUR FIRM
ISIMEK was established in 2002 as an engineering and contracting firm and grew and
institutionalized in the course of time; the firm with its personnel over 100 in number
manufactures Boilers, Heat Power Stations, Industrial Facilities, Pressure Vessels and
Contracting Works on turn-key basis both for national and international markets at a plant having
indoor area of 2.000 m² and, as such, it significantly contributes to the national economy and
continue to be one of the leading manufacturers in Turkey.
Holding the mission to contribute to the raising targets of Turkey with its expert, young,
dynamic and trained staff in their fields, ISIMEK has become a competitive and well-established
firm in the heating sector with high investment power and responsive to the changes quickly and
properly.
ISIMEK considers the understanding of real competition not in the products and
technologies, but rather in the performance models in doing the works. Standing out with its real
reforms in the fields of production, distribution, after-sale service and general management,
ISIMEK has not only raised the standards in Turkey, but also concentrated on export in recent
years. Today ISEMEK exports to more than 10 countries, primarily Russia, Ukraine, Algeria,
Lebanon, Afghanistan and Turkic Republics.
4
Forecasting higher sales both at home and abroad in the following years and planning its
capacity already so as to fulfill increased production demand, the company has become a
production center fulfilling need of central boiler systems.
ISIMEK continues to develop exceptional products and solutions as milestones of the
heating technology. It will be a determining factor in the progress of technology in future as it has
always been in the past.
We, ISEMEK, work for excellence in order to offer the best quality in all aspects of our
business. Nothing can be best unless it is constantly developed. Our products will be long-lasting
and easy to use for the future systems.
In addition to the services we offer for all kinds of heating technology, we also provide
specific systems solutions for a wide range of applications in line with the special requirements of
the markets. Our products ensure cost saving and protect environment.
We make our best endeavor to construct buildings and processes by use of the best
quality materials, workmanship and energy efficiency to the maximum extent.
This ensures efficiency not only of the limited natural resources, but also of our activities.
We target preservation of the environment, protect climate and maintain natural
foundation of the life, by encouraging renewable energy systems throughout all processes,
Thanks to high energy efficiency, our products helps saving in the heating costs.
QUALITY POLICY
ISIMEK is one of the leading firms in Turkey in the field of design, manufacture, sale and
service of heating systems, showing quick growth and dynamic capability of change.
ISO 9001:2000 Quality Management System and processes have been established in line
with the targets set by the company for constant improvement and supervision. While performing
these activities, ISIMEK undertakes to allocate and maintain the resources which are required to
ensure and keep customer satisfaction in compliance with the applicable laws and regulations
and related standards.
5
MANAGING DIRECTOR
MANAGEMENT REPRESENTATIVE
FINANCE PRODUCTIONPERSONNEL ANDADMINISTRATION
MARKETING
PURCHASING QUALITYDESIGN
PRODUCTION PERSONNEL
QUALITY SLOGANS
Excellent and quality work
Employees happiness
Affordable price
Customer satisfaction
Timely delivery
TRAINING
In the scope of the training activities for 2014, training schedules have been designed and
implemented by the training department of our firm to ensure that our personnel develop their
knowledge and skills, follow technological changes, have access to the information quickly and
work at a reliable and safe workplace.
These trainings include technical trainings, quality management system trainings,
motivation and communication trainings and health and safety at work trainings.
Additionally, orientation trainings are organized by our company for new engineers and
administrative personnel.
ORGANIZATION CHART
6
COMPANY’S FIELDS OF ACTIVITIES
ISIMEK range of products are as follows in 2014:
Turn-key energy generation plants,
Solid-liquid fuel cylindrical and semi-cylindrical steam boilers;
Solid-fuel hot oil boiler systems;
Chip fuel hot and warm water boiler systems;
Solid-liquid fuel hot water boiler systems;
Boiler systems with fluidized bed;
Moving grill boiler systems;
Mechanical powder coal-burning (stoker) systems;
Front furnace burning systems with water pipe;
Solid – liquid fuel thermo-block boiler systems;
Complete heating centers;
Independent heating boilers;
Heat exchangers;
Boilers;
Industrial chimneys;
Chimney exhaust fans;
Asphalt storage tank;
Pentane, styrene, LPG, air tanks
Boiler;
All kinds of pressure vessels;
Chip, cement, coal silos and silo mixers;
Dust collection and filter systems;
Ventilation systems;
Conveyor belt;
Elevators;
PLC controlled automation systems;
Special manufactures.
Make designs at home and abroad; deal with project management contracts; do and
contract for engineering works;
Provide all kinds of engineering service;
Design, manufacture and install all kinds of steel chimney required by the industry;
Manufacture metro line tunnels, emergency ventilation channel elbows, emergency
ventilation silencers and channel wall connection elements;
Manufacture stainless equipment required by the petro-chemical plants;
7
Design and manufacture steam boilers operating in the principle of fluid bed technology;
Rework or repair of construction works as tendered by ministries and government
agencies attached to them, public economic enterprises, economic state organizations,
public economic organizations, public departments, local administrations, municipalities,
building cooperatives and private organizations at home and abroad; make bids, perform,
if awarded with the contract, all kinds of mechanical, electric, installation and
constructions works and purchase, sale and sale of all associated equipment and
materials on turnkey basis and cause them to be performed.
PROJECTS
Raise awareness that waste heat is a renewable energy source for research and
development of methods to turn waste heat of Thermal Power Station into benefit and
implementation of them to heat buildings and make efforts to spread nationwide the
methods to efficiently use heat energy.
Perform project studies for renewal of the obsolete technologies of the thermal power
stations which are centers for electric energy in our country.
8
EQUIPMENT
Production equipment in our modern plant consist of the most advanced machinery.
Equipment fool is constantly developed by closely following the advanced technology.
CNC plasma arc cutting machine
Apkant scissors 2x12 m 60 mm
Apkant press 3 m 6 mm
Apkant scissors 3 m 10 mm
Cylinder 4-ball 2,2 m 25 mm
Cylinder 3-ball 2,2 m 15 mm
Cylinder 3-ball 1,2 m 3 mm
Cylinder 1 m 2 mm
Combined scissors 4 kw
Submerged arc welding, column boom 1000 amp
Tig welding machine 5 units
Mig welding machine 6 units
Electric welding machine 10 units
Radial drill 32 mm
Circular saw
Band saw
Crane, ceiling type, 20 ton
Crane, ceiling type, 10 ton
Crane, ceiling type, 5 ton
Power tools
Site container
TECHNICAL INSPECTIONS
Our firm researches compliance of the materials used in the manufacturing with the
technical specifications and standards in line with the general purpose and policies and principle
of efficiency and cause physical and chemical tests necessary for quality control to be inspected
by the laboratories of the leading organizations in Turkey.
9
LEGAL ADDRESS AND CONTACT
Our firm is at Saray Mahallesi Aksoy Caddesi No: 34, Kazan, Ankara.
Administrative operations of our company are conducted at the head office of the firm and
we have offices in each site.
Business Title : ISIMEK MAKİNE KAZAN İNŞAAT SANAYİ TİCARET LTD. ŞTİ.
Legal Address : Saray Mah. Aksoy Cad. No: 34
Kazan / ANKARA
Service Address : Saray Mah. Aksoy Cad. No: 34
Kazan / ANKARA
Tel : +90 (312) 815 56 07 – 08 – 09
Fax : +90 (312) 815 56 10
E-mail : [email protected]
Web : www.isimek.com.tr
10
CORPORATE CERTIFICATES
ISO 9001:2000 Quality Management System Certificate
Our company has performed quality assurance in the production in cooperation
with an independent organization providing expert consultancy service.
As a result of the operations, our company was granted with ISO 9001:2000 by
Turkish Lloyd’s Trust, Economic Enterprise.
11
TSE Certificates
As compliance of the standards applied by our company with international
standards has been established by inspections made by TSE, we have been entitled to
obtain certificates of TSE CE, TSE 303-1, TSE 303-5, TSE 377, TSE 497, TSEK.