Your guide to becoming aDomestic Electrical Installer

T R A I N I N G & A S S E S S M E N T C E N T R E S

LOW COSTFINANCE

AVAILABLE

0%

representative

APR

Your guide to becoming a OverviewThis programme is an intensive 22 day practical training and assessment programme for thosewishing to start working in the electrical trade and start down the route of becoming registeredwith a competent person scheme (CPS) as a Domestic Electrical Installer. Registering with a CPSallows the installer to self-certify their work and for the CPS to issue a building controlcompliance certificate directly to the customer (only required for notifiable tasks).

The course has been developed for those with little or no electrical knowledge but who areadept at practical and manual tasks and have basic numeracy skills. Training will provide therequired knowledge and practical skills to be able to install electrical installations withindomestic dwellings and, most importantly, to be able to install, inspect, test and certificate workto the 18th Edition Wiring Regulations BS 7671:2018.

What qualifications will I gain?Upon successful completion of the course you will gain the following qualifications andcertificates. The Health & Safety Courses included within the package are undertaken onlineby the candidate. l Logic Certification Domestic Electrical Installer – Part P (Full Scope) l 18th Edition Wiring Regulations, BS 7671 (City & Guilds 2382-18 – RQF Level 3) l Initial Verification, Testing and Certification of Electrical Installations (Logic Certification RQF Level 3) l Health & Safety – Manual Handling l Health & Safety – Fire Safety l Health & Safety – Asbestos Awareness l Health & Safety – Working at Heights.

What will I learn? l Electrical wiring regulations, standards and associated documents l Competent Persons Schemes (CPS), why they are needed and how to register l Safe working and isolation l Basic electrical theory, including OHMS Law, power laws and resistance l Building Regulations – Part P and Part M l Understanding wiring and circuit diagrams l Electrical components including consumer units and safety devices l Installation techniques and correct use of tools l Cable calculations, types, connecting and terminating l Use of electrical test meters and subsequent calculations l Testing, fault finding, earthing and bonding l Electricity containment, trunking and conduits l Electrical applications – lighting circuits, showers, spurs and cookers l Initial verification, testing and certification of electrical installations, including three-phase testing l Health and Safety – asbestos awareness, manual handling, fire safety and working at heights

Learning will take place in our electrical training rooms, equipped with a range of practicaltesting boards and scenarios, and in our dedicated electrical installation training bays andworkshop. Practical training will cover all the skills required to carry out a full domestic electricalinstallation, including power, lighting, showers, ELV lighting, cookers and outside circuits. Onceyou have completed the full installation within the bay you will then test and issue the relevantelectrical test certificate for that installation.

What will I be able to do after this course?This course will give you the skills, knowledge and qualifications to meet therequirements of the electrical competent person Schemes such as NAPIT, ELECSA.STROMA, NIC etc. as a Domestic Electrical Installer, which you would need to join ifyou wish to self-certify your own work. As part of the registration process with a CPSyou will be required to have an on-site inspection where a job you have carriedout and certificated will be inspected. You will also be required to demonstrateprevious experience working on domestic electrical systems over a period of time.

Domestic Electrical Installer

WHAT NEXT?To book your place on this course please call our bookings teamon 0345 845 7222. A deposit is required and Interest Free Financepackages are available. Alternatively, you can attend one of ourfree of charge electrical new entrants open days at our Northoltcentre. Go to the New Entrants section at www.logic4training.co.ukto register on the open day session.

Course costs include: l All training as outlined

l All examination fees

l All the tools, equipment and materials provided

l Your own copy of the 18th Edition Wiring Regulations, IET On Site Guide, IET Guidance Note 3: Inspection & Testing, Electrical Installation Training Manual

l Access to the Clublogic online learning portal where you will be able to access refresher and revision training modules after each session l Refreshments and lunch

DurationThe course is completed over 22 days. The first 10 day module is undertaken at the Northolt centre. The next3 modules for each qualification can be taken at Northolt or Basildon on any of the regular scheduled courses,allowing you to spread the course over a timeframe to suit your situation. There is no restriction on when youhave to complete them all by. The training takes place between 8.30am and 4.00pm each day.

New Entrants Domestic Electrical Installer Course

Package price from £2,250 +vat

Interest Free Finance option available (see back page)

Module Course Title Duration Centre Individual OPTION 1 OPTION 2 prices Split Package price Full package price

1 Core electrical practical 10 DAYS Northolt £1,295.00 £1,295.00 skills and knowledge

2 Domestic Electrical 5 DAYS Northolt £845.00

£2,250.00 Installer – Full scope or Basildon

3 18th Edition Wiring 3 DAYS Northolt £455.00 £1,500.00 Regulations BS 7671 or Basildon

4 Initial Inspection, 4 DAYS Northolt

Testing and Certification or Basildon £595.00

TOTAL 22 DAYS £3,190.00 £2,795.00 £2,250.00

SAVING YOU £395.00 £940.00

Course options & prices

For options 1 and 2, you will be required to pay in full prior to the startdate of the first module undertaken. All prices are exclusive of VAT

Logic4training LimitedNortholt Centre (Head office): Unit 2, 1 Rowdell Road, Northolt, Middlesex UB5 5QR

Luton Centre: Unit 2, Sundon Business Park, Dencora Way, Luton, Bedfordshire LU3 3HPBasildon Centre: Victoria House, Hemmells, Laindon, Basildon, Essex SS15 6ED

Tel: 0345 845 7222 enquiries@logic4training.co.uk www.logic4training.co.uk

LUTONNORTHOLT BASILDON

For more information on spreading the costs call our Customer Service Team on 0345 845 7222

Gas Logic Limited is authorised and regulated by the Financial Conduct AuthorityRegistered in England No.4112853

Logic4training is the trading name of Gas Logic Limited

Company DetailsGas Logic Ltd acts as a credit intermediary and only offers credit products through Deko.

Deko is a trading name of Pay4Later Ltd who act as a credit intermediary. They are registered in Englandand Wales (company number 06447333) and authorised and regulated by the Financial Conduct Authority(register number 728646). For more information please go to www.dekopay.com/faq or visit www.dekopay.com.

Finance is provided through the Deko platform by a number of lenders. You will be offered the best rateavailable based on your credit history and our lenders’ credit decision policies. You will be informed who thelender is at the point the loan is offered and provided with their full contact details.

RepresentativeExample

Spreading the cost of training

Purchase Price £2,700.00Deposit £270.00Amount of Credit £2,430.0012 Monthly Payments £202.50Total Repayable £2,430.00Duration 12 monthsRate of Interest (fixed) 0%0% APR Representative

The advantages of using the finance offered by Logic4training with DEKO would be:-

• Spreads the cost • Secure easy application process either online or in our Northolt centre • Simple monthly payments by Direct Debit • Applications processed quickly with an instant decision • No forms to sign • Minimum booking value eligible for finance is £500

Available finance options from Logic4training

• 12 Months Interest Free Credit at 0% APR

• 24 Months Low Rate Credit at 9.9% APR