Your shop has invested in multi-tasking Turn-Mill Centers to machine complete parts in a single set-up, reduce cycle time and increase precision. PartMaker Turn-Mill allows you to take the next step in productivity. The software lets you program and simulate the machining of your Turn-Mill parts off-line at your computer. By generating edit-free CNC programs and proving out the results on screen with PartMaker you will reduce programming and set up time resulting in a measurable savings of time and money!

“We weren’t able to get a complete program from our existing CAM package. It wasn’t sophisticated enough to handle our new-age machines. PartMaker has solved that problem, and just as the new machines are enabling us to produce more and more complex parts in less time,

our new software is enabling us to program those parts in less time.” Michael Tamasi , President

Boston Centerless - Accurounds

Are you looking to get more out of your multi-axis lathes?

PartMaker’s Patented Visual Programming approach makes it easier to program parts with a number of turned and milled features. For machines with multiple turrets and/or multiple spindles, PartMaker’s Patented Visual Synchronization technology allows you to synchronize simultaneous machining operations automatically. The software displays a time chart, showing a time for each operation and a total cycle time, including any overlapping operations. Once a part is programmed, you can perform a 3D machining simulation to ensure your part will run without any errors or collisions.

PartMaker supports the programming of virtually every Turn-Mill machine on the market. PartMaker Turn-Mill post processors have been developed for each multi-axis lathe based on the machine’s specific architecture and machine control, assuring you that the software will generate accurate NC code for your machine.

Compatibility:

Doosan •Hardinge •Okuma •Mori-Seiki •Mazak •Miyano •Nakamura-Tome •Haas •Index •Citizen •Gildemeister •Biglia/Eurotech •Hwacheon •Emco Maier •Hyundai-Kia •Wasino •

WFL •Willemin-Macodel •Bumotec •Chiron •Star •Romi •Takamaz •Takisawa•Daewoo •OmniTurn •Spinner •Topper •Tsugami •Samsung•

…and others

1-888-270-6878 550 Pinetown Rd. , Ste. #470, For t Washington, PA 19034 w w w.par tmaker.com info@par tmaker.com

Patented Divide and Conquer Programming Approach

PartMaker Turn-Mill employs a powerful ‘Divide and Conquer’ programming approach to make simplify the programming of multi-axis Turn-Mill Centers. This unique technology allows the programmer to break a part with a number of turned and milled features into a series of much simpler operations. The software automatically sets the coordinate system in which features are being machined and applies the appropriate tool motion. The ‘Divide and Conquer’ approach makes programming even the most complex parts on multi-tasking Turn-Mill Centers much quicker and easier than ever before.

Patented Visual Synchronization Technology

PartMaker’s patented Visual Synchronization technology is a graphical system that lets users program process synchronization in a universal manner, automatically inserting “wait codes” into the multi-channel CNC programs required by today’s complex multi-tasking Turn-Mill Centers. This approach lets the user quickly optimize a part process assuring it is running as optimally as possible with the most efficient possible cycle time. It allows the user to easily perform “What If” scenarios clearly showing overlapping operations via a graphical time chart.

Vivid 3D Simulation

With the cost of today’s Turn-Mill centers, collisions can be down-right catastrophic. To avoid such expensive problems, PartMaker Turn-Mill simulates machining of the part with vivid 3D graphics. PartMaker Turn-Mill’s simulation will perform full collision detection between the tools in the work and the part in addition to allowing the user to see what the part will look like before sending the program to the machine. PartMaker Turn-Mills’s Full Machine Simulation will provide a comprehensive simulation of the machine’s entire working environment, detecting any collision between tool holders, turrets and any other machine components.

Robust, Flexible and Accurate Post Processors

PartMaker Turn-Mill has a vast library of robust, well documented, developer supported Swiss lathe post processors. PartMaker supports virtually every multi-tasking Turn-Mill built in the past 15 years including every model from such leading builders as Mori-Seiki, Mazak, Okuma, Nakamura-Tome, Doosan, Miyano and many others. All PartMaker multi-axis turning post processors are fully user customizable using PartMaker’s unique ‘Config-by-Click’ technology. Better yet, with PartMaker Turn-Mill, once a part is programmed for one machine, by simply loading a new post processor, a program can be regenerated in moments for the same part on a completely different Turn-Mill Center.

System Requirements

PartMaker runs optimally on virtually any Windows 7, Windows Vista or Windows XP based PC.Specific system requirements are: Windows 7, Windows Vista or Windows XP, Pentium 4 3ghz or higher processor, 40 GB Hard Drive or larger, 2 GB of RAM or more and 512 MB Independent Video Card or better.